Kyösti Mälkki has uploaded this change for review.

View Change

lib/: Drop generic_dump_spd

Not built, relies on SMBUS for SPD and we do not have
a globally defined spd_read_byte() prototype.

Change-Id: Ifb9d3aa31207cb5b99f475b70f52a03aca73432b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
---
D src/lib/generic_dump_spd.c
1 file changed, 0 insertions(+), 80 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/37/38037/1

diff --git a/src/lib/generic_dump_spd.c b/src/lib/generic_dump_spd.c
deleted file mode 100644
index fdde026..0000000
--- a/src/lib/generic_dump_spd.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * This code is derived from the Opteron boards' debug.c.
- * It should go away either there or here, depending what fits better.
- */
-
-#include <console/console.h>
-
-static void dump_spd_registers(const struct mem_controller *ctrl)
-{
-	int i;
-	printk(BIOS_DEBUG, "\n");
-	for (i = 0; i < 4; i++) {
-		unsigned int device;
-		device = ctrl->channel0[i];
-		if (device) {
-			int j;
-			printk(BIOS_DEBUG, "dimm: %02x.0: %02x", i, device);
-			for (j = 0; j < 256; j++) {
-				int status;
-				unsigned int char byte;
-				if ((j & 0xf) == 0)
-					printk(BIOS_DEBUG, "\n%02x: ", j);
-				status = spd_read_byte(device, j);
-				if (status < 0) {
-					printk(BIOS_DEBUG, "bad device\n");
-					break;
-				}
-				byte = status & 0xff;
-				printk(BIOS_DEBUG, "%02x ", byte);
-			}
-			printk(BIOS_DEBUG, "\n");
-		}
-		device = ctrl->channel1[i];
-		if (device) {
-			int j;
-			printk(BIOS_DEBUG, "dimm: %02x.1: %02x", i, device);
-			for (j = 0; j < 256; j++) {
-				int status;
-				unsigned int char byte;
-				if ((j & 0xf) == 0)
-					printk(BIOS_DEBUG, "\n%02x: ");
-				status = spd_read_byte(device, j);
-				if (status < 0) {
-					printk(BIOS_DEBUG, "bad device\n");
-					break;
-				}
-				byte = status & 0xff;
-				printk(BIOS_DEBUG, "%02x ", byte);
-			}
-			printk(BIOS_DEBUG, "\n");
-		}
-	}
-}
-
-#if 0
-void dump_spd_registers(void)
-{
-	unsigned int device;
-	device = SMBUS_MEM_DEVICE_START;
-	printk(BIOS_DEBUG, "\n");
-	while (device <= SMBUS_MEM_DEVICE_END) {
-		int status = 0;
-		int i;
-		printk(BIOS_DEBUG, "dimm %02x", device);
-		for (i = 0; (i < 256) && (status == 0); i++) {
-			unsigned int char byte;
-			if ((i % 20) == 0)
-				printk(BIOS_DEBUG, "\n%3d: ", i);
-			status = smbus_read_byte(device, i, &byte);
-			if (status != 0) {
-				printk(BIOS_DEBUG, "bad device\n");
-				continue;
-			}
-			printk(BIOS_DEBUG, "%02x ", byte);
-		}
-		device += SMBUS_MEM_DEVICE_INC;
-		printk(BIOS_DEBUG, "\n");
-	}
-}
-#endif

To view, visit change 38037. To unsubscribe, or for help writing mail filters, visit settings.