10 comments:
nit: this board also supports Sandy Bridge CPUs
*wink*
With which CPU did you test this port?
Added to commit message.
File src/mainboard/asus/p8z77-m/Kconfig:
config MAX_CPUS
int
default 8
already set in cpu/intel/model_206ax
Done
File src/mainboard/asus/p8z77-m/cmos.layout:
# gfx_uma_size (Intel IGP Video RAM size)
7 0 32M
7 1 64M
7 2 96M
7 3 128M
7 4 160M
7 5 192M
7 6 224M
7 7 256M
7 8 288M
7 9 320M
7 10 352M
7 11 384M
7 12 416M
7 13 448M
7 14 480M
7 15 512M
7 16 544M
7 17 576M
7 18 608M
7 19 640M
7 20 672M
7 21 704M
7 22 736M
7 23 768M
7 24 800M
7 25 832M
7 26 864M
7 27 896M
7 28 928M
7 29 960M
7 30 992M
From "Document Number: 326765-005Desktop 3rd Generation Intel®Core™ Processor Family, Desktop Intel® […]
Intel's doc are hard to believe, with a substantial typo on the same page. Yes, I downloaded that doc today. I'll boot test more next week.
File src/mainboard/asus/p8z77-m/dsdt.asl:
Patch Set #6, Line 25: #include <drivers/intel/gma/acpi/default_brightness_levels.asl>
*poke*
Done
File src/mainboard/asus/p8z77-m/early_init.c:
unsigned int
Done. But honestly, it doesn't make a difference.
Patch Set #10, Line 217: P8Z77-M Pro
Copypasta! 😄
Ack
File src/mainboard/asus/p8z77-m/early_init.c:
Patch Set #11, Line 48: static const u8 register_values[] = {
> I'd strongly recommend adding some comment here explaining this is done to save some bytes. […]
If an entire comment block doesn't get the message through...
/* This sequence enables early serial */
SWITCH_TO, NCT6779D_SP1,
PNP_IDX_EN, 0,
PNP_IDX_IO0, CONFIG_TTYS0_BASE >> 8,
PNP_IDX_IO0 + 1, CONFIG_TTYS0_BASE & 0xff,
PNP_IDX_EN, 1,
nuvoton_enable_serial()
See above.
pei->usb_port_config = {
/* {enabled, oc_pin, cable len 0x0080=<8inches/20cm} */
{ 1, 0, 0x0080 },
{ 1, 0, 0x0080 },
{ 1, 1, 0x0080 },
{ 1, 1, 0x0080 },
{ 1, 2, 0x0080 },
{ 1, 2, 0x0080 },
{ 1, 3, 0x0080 },
{ 1, 3, 0x0080 },
{ 1, 4, 0x0080 },
{ 1, 4, 0x0080 },
{ 1, 6, 0x0080 },
{ 1, 5, 0x0080 },
{ 1, 5, 0x0080 },
{ 1, 6, 0x0080 }
};
I don't think this compiles.
Now it should, that it has been redone.
To view, visit change 38988. To unsubscribe, or for help writing mail filters, visit settings.