View Change

5 comments:

• File Documentation/mainboard/supermicro/x11-lga1151-series/x11ssh-f/x11ssh-f.md:

  • Patch Set #3, Line 37: - S3 resume not working

    Sorry, I may be just blind... […]

    Done

• File Documentation/mainboard/supermicro/x11-lga1151-series/x11ssh-f/x11ssh-f.md:

  • Patch Set #4, Line 39: failed to be initialize

    Add some notes about using IGD for computaion, please, if you're able to resolve the issue

    Done

• File src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-f/include/variant/gpio.h:

  • Patch Set #3, Line 8:

    I have added some comments below; would be great if you could provide the raw inteltool output; just […]

    inteltool dunp: https://pastebin.com/yzfpLx9f

• File src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-f/overridetree.cb:

  • Patch Set #4, Line 14:

    	# Additional FSP Configuration
    	# This board has an IGD with no output.
    	register "PrimaryDisplay" = "Display_Auto"
    
    

    Sorry for the confusion; I haven't thought about that case. […]

    Done

  • Patch Set #4, Line 18:

    # PCIe configuration
    	# Enable i210-AT (GbE)
    	register "PcieRpEnable[0]" = "1"
    	register "PcieRpEnable[1]" = "1"
    
    	# Enable M.2
    	register "PcieRpEnable[4]" = "1"
    
    	# Enable ASpeed PCI bridge
    	register "PcieRpEnable[6]" = "1"
    
    	# Enable JPCIE1
    	register "PcieRpEnable[8]" = "1"
    
    

    The PcieRpEnable fsp settings are going to be set via the on/off setting in the devicetree in the ne […]

    Done

To view, visit change 45229. To unsubscribe, or for help writing mail filters, visit settings.