Patrick Georgi submitted this change.
Documentation: Add documentation on jenkins builders
Put this in a new directory called 'infrastructure' and make a link
and an index.md file for the directory.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I54a0204e7525a25f2fd717a73007b304aac67396
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
---
M Documentation/index.md
A Documentation/infrastructure/builders.md
A Documentation/infrastructure/index.md
3 files changed, 399 insertions(+), 0 deletions(-)
diff --git a/Documentation/index.md b/Documentation/index.md
index fd1ecb1..82ff12d 100644
--- a/Documentation/index.md
+++ b/Documentation/index.md
@@ -187,5 +187,6 @@
* [SuperIO](superio/index.md)
* [Vendorcode](vendorcode/index.md)
* [Utilities](util.md)
+* [coreboot infrastructure](infrastructure/index.md)
* [Release notes for past releases](releases/index.md)
* [Flashing firmware tutorial](flash_tutorial/index.md)
diff --git a/Documentation/infrastructure/builders.md b/Documentation/infrastructure/builders.md
new file mode 100644
index 0000000..15c3ab9
--- /dev/null
+++ b/Documentation/infrastructure/builders.md
@@ -0,0 +1,392 @@
+# Jenkins builder setup and configuration
+
+## How to set up a new jenkins builder
+
+### Contact a jenkins admin
+
+Let a jenkins admin know that you’re interested in setting up a jenkins
+build system.
+
+For a permanent build system, this should generally be a dedicated
+machine that is not generally being used for other purposes. The
+coreboot builds are very intensive.
+
+It's also best to be aware that although we don't know of any security
+issues, the jenkins-node image is run with the privileged flag which
+gives the container root access to the build machine. See
+[this article](https://blog.trendmicro.com/trendlabs-security-intelligence/why-running-a-privileged-container-in-docker-is-a-bad-idea/)
+about why this is discouraged.
+
+It's recommended that you give an admin root access on your machine so
+that they can reset it in case of a failure. This is not a requirement,
+as the system can just be disabled until someone is available to fix any
+issues.
+
+Currently active Jenkins admins:
+* Patrick Georgi:
+ * Email: [patrick@georgi-clan.de](mailto:patrick@georgi-clan.de)
+ * IRC: pgeorgi
+
+
+### Build Machine requirements
+
+For a builder, we need a fast system with lots of threads and plenty of
+RAM. The builder builds and stores the git repos and output in tmpfs
+along with the ccache save area, so if there isn't enough memory, the
+builds will slow down because of smaller ccache areas and can run into
+"out of storage space" errors.
+
+#### Current Build Machines
+
+To give an idea of what a suitable build machine might be, currently the
+coreboot project has 3 active jenkins build machines.
+
+* Congenialbuilder - 128 threads, 256GiB RAM
+ * Fastest Passing coreboot gerrit build: 4 min, 30 sec
+ * Slowest Passing coreboot gerrit build: 9 min, 56 sec
+
+
+* Gleeful builder - 64 thread, 64GiB RAM
+ * Fastest Passing coreboot gerrit build: 6 min, 6 sec
+ * Slowest Passing coreboot gerrit build, 34 min
+
+
+* Ultron (9elements) - 48 threads, 128GiB RAM
+ * Fastest Passing coreboot gerrit build: 6 min, 32 sec
+ * Slowest Passing coreboot gerrit build: 44 min
+
+
+### Jenkins Builds
+
+There are a number of builds handled by the coreboot jenkins builders,
+for a number of different projects - coreboot, flashrom, memtest86+,
+em100, etc. Many of these have builders for their current master branch
+as well as gerrit and coverity builds.
+
+You can see all the builds here:
+[https://qa.coreboot.org/](https://qa.coreboot.org/)
+
+Most of the time on the builders is taken up by the coreboot master and
+gerrit builds.
+
+* [coreboot gerrit build](https://qa.coreboot.org/job/coreboot-gerrit/)
+([Time trend](https://qa.coreboot.org/job/coreboot-gerrit/buildTimeTrend))
+
+
+* [coreboot master build](https://qa.coreboot.org/job/coreboot/)
+ ([Time trend](https://qa.coreboot.org/job/coreboot/buildTimeTrend))
+
+
+### Stress test the machine
+
+Test the machine to make sure that building won't stress the hardware
+too much. Install stress-ng, then run the stress test for at least an
+hour.
+
+On a system with 32 cores, it was tested with this command:
+
+```
+$ stress-ng --cpu 20 --io 6 --vm 6 --vm-bytes 1G --verify --metrics-brief -t 60m
+```
+
+You can watch the temperature with the sensors package or with ‘acpi -t’
+if your machine supports that.
+
+You can check for thermal throttling by running this command and seeing
+if the values go down on any of the cores after it's been running for a
+while.
+
+```
+$ while [ true ]; do clear; cat /proc/cpuinfo | grep 'cpu MHz' ; sleep 1; done
+```
+
+If the machine throttles or resets, you probably need to upgrade the
+cooling system.
+
+
+## jenkins-server docker installation
+
+
+### Manual Installation
+
+If you’ve met all the above requirements, and an admin has agreed to set
+up the builder in jenkins, you’re ready to go on to the next steps.
+
+
+### Set up your network so jenkins can talk to the container
+
+Expose a local port through any firewalls you might have on your router.
+This would generally be in the port forwarding section, and you'd just
+forward a port (typically 49151) from the internet directly to the
+builder’s IP address.
+
+You might also want to set up a port to forward to port 22 on your
+machine and set up openssh so you or the jenkins admins can manage
+the machine remotely (if you allow them).
+
+
+### Install and set up docker
+
+Install docker by following the
+[directions](https://docs.docker.com/engine/install/) on the docker
+site. These instructions keep changing, so just check the latest
+information.
+
+
+#### Set up environment variables
+
+To make configuration and the later commands easier, these should go in
+your shell's .rc file. Note that you only need to set them if you're
+using something other than the default.
+
+```
+# Set the port used on your machine to connect to jenkins.
+export COREBOOT_JENKINS_PORT=49151
+
+# Set the revision of the container from docker hub
+export DOCKER_COMMIT=65718760fa
+
+# Set the location of where the jenkins cache directory will be.
+export COREBOOT_JENKINS_CACHE_DIR="/srv/docker/coreboot-builder/cache"
+
+# Set the name of the container
+export COREBOOT_JENKINS_CONTAINER="coreboot_jenkins"
+```
+
+Make sure any variables needed are set in your environment before
+continuing to the next step.
+
+
+### Using the Makefile for docker installation
+
+From the coreboot directory, run
+
+```
+make -C util/docker help
+```
+
+This will show you the available targets and variables needed:
+
+```
+Commands for working with docker images:
+ coreboot-sdk - Build coreboot-sdk container
+ upload-coreboot-sdk - Upload coreboot-sdk to hub.docker.com
+ coreboot-jenkins-node - Build coreboot-jenkins-node container
+ upload-coreboot-jenkins-node - Upload coreboot-jenkins-node to hub.docker.com
+ doc.coreboot.org - Build doc.coreboot.org container
+ clean-coreboot-containers - Remove all docker coreboot containers
+ clean-coreboot-images - Remove all docker coreboot images
+ docker-clean - Remove docker coreboot containers & images
+
+Commands for using docker images
+ docker-build-coreboot - Build coreboot under coreboot-sdk
+ <BUILD_CMD=target>
+ docker-abuild - Run abuild under coreboot-sdk
+ <ABUILD_ARGS='-a -B'>
+ docker-what-jenkins-does - Run 'what-jenkins-does' target
+ docker-shell - Bash prompt in coreboot-jenkins-node
+ <USER=root or USER=coreboot>
+ docker-jenkins-server - Run coreboot-jenkins-node image (for server)
+ docker-jenkins-attach - Open shell in running jenkins server
+ docker-build-docs - Build the documentation
+ docker-livehtml-docs - Run sphinx-autobuild
+
+Variables:
+ COREBOOT_JENKINS_PORT=49151
+ COREBOOT_JENKINS_CACHE_DIR=/srv/docker/coreboot-builder/cache
+ COREBOOT_JENKINS_CONTAINER=coreboot_jenkins
+ COREBOOT_IMAGE_TAG=f2741aa632f
+ DOCKER_COMMIT=65718760fa
+```
+
+### Set up the system for the jenkins builder
+
+As a regular user - *Not root*, run:
+
+```
+sudo mkdir -p ${COREBOOT_JENKINS_CACHE_DIR}
+sudo mkdir -p ${COREBOOT_JENKINS_CCACHE_DIR}
+sudo chown $(whoami):$(whoami) ${COREBOOT_JENKINS_CCACHE_DIR}
+sudo chown $(whoami):$(whoami) ${COREBOOT_JENKINS_CACHE_DIR}
+wget http://www.dediprog.com/save/78.rar/to/EM100Pro.rar
+mv EM100Pro.rar ${COREBOOT_JENKINS_CACHE_DIR}
+```
+
+### Install the coreboot jenkins builder
+
+```
+make -C util/docker docker-jenkins-server
+```
+
+Your installation is complete on your side.
+
+### Tell the Admins that the machine is set up
+Let the admins know that the builder is set up so they can set up the
+machine profile on qa.coreboot.org.
+
+They need to know:
+* Your external IP address or domain name. If you don’t have a static
+IP, make sure you have a dynamic dns hostname configured.
+* The port on your machine and firewall that’s exposed for jenkins:
+`$COREBOOT_JENKINS_PORT`
+* The core count of the machine.
+* How much memory is available on the machine. This helps determine
+the amount of memory used for ccache.
+
+
+### First build
+On the first build after a machine is reset, it will frequently take
+20-25 minutes to do the entire what-jenkins-does build while the ccache
+is getting filled up and the entire coreboot repo gets downloaded. As
+the ccache gets populated, the build time will drop.
+
+
+## Additional Information
+
+
+### How to log in to the docker instance for debugging
+```
+ $ make -C util/docker docker-jenkins-attach
+ $ su coreboot
+ $ cd ~/slave-root/workspace
+ $ bash
+```
+
+
+WARNING: This should not be used to make changes to the build system,
+but just to debug issues. Changes to the build system are highly
+discouraged as it leads to situations where patches can pass the build
+testing on one builder and fail on another builder. Any changes that are
+made in the image will be lost on the next update, so if you
+accidentally change something, you can remove the containers and images
+and update to get a fresh installation.
+
+
+### How to download containers/images for a fresh installation and remove old containers
+
+To delete the old containers & images:
+
+```
+$ docker stop $COREBOOT_JENKINS_CONTAINER
+$ docker rm $COREBOOT_JENKINS_CONTAINER
+$ docker images # lists all existing images
+$ docker rmi XXXX # Use the image ID found in the above command.
+```
+
+To get and run the new coreboot-jenkins image, change the value in the
+`DOCKER_COMMIT` variable to the new image value.
+
+```
+$ make -C util/docker docker-jenkins-server
+```
+
+#### Getting ready to push the docker images
+
+Set up an account on hub.docker.com
+
+Get an admin to add the account to the coreboot team on hub.docker.com
+
+[https://hub.docker.com/u/coreboot/dashboard/teams/?team=owners](https://hub.docker.com/u/coreboot/dashboard/teams/?team=owners)
+
+Make sure your credentials are configured on your host machine by
+running
+
+```
+$ docker login
+```
+
+This will prompt you for your docker username, password, and your email
+address, and write out to ~/.docker/config.json. Without this file, you
+won’t be able to push the images.
+
+#### Updating the Dockerfiles:
+
+The coreboot-sdk Dockerfile will need to be updated when any additional
+dependencies are added. Both the coreboot-sdk and the
+coreboot-jenkins-node Dockerfiles will need to be updated to the new
+version number and git commit id anytime the toolchain is updated. Both
+files are stored in the coreboot repo under coreboot/util/docker.
+
+Read the [dockerfile best practices](https://docs.docker.com/v1.8/articles/dockerfile_best-practices/)
+page before updating the files.
+
+#### Rebuilding the coreboot-sdk docker image to update the toolchain:
+
+```
+$ make -C util/docker coreboot-sdk
+```
+
+This takes a relatively long time.
+
+#### Test the coreboot-sdk docker image:
+
+There are two methods of running the docker image - interactively as a
+shell, or doing the build directly. Running interactively as a shell is
+useful for early testing, because it allows you to update the image
+(without any changes getting saved) and re-test builds. This saves the
+time of having to rebuild the image for every issue you find.
+
+#### Running the docker image interactively:
+
+Run:
+
+```
+$ make -C util/docker docker-jenkins-server
+$ make -C util/docker docker-jenkins-attach
+```
+
+#### Running the build directly:
+
+From the coreboot directory:
+
+```
+$ make -C util/docker docker-build-coreboot
+```
+
+You’ll also want to test building the other projects and payloads:
+ChromeEC, flashrom, memtest86+, em100, Grub2, SeaBIOS, iPXE, coreinfo,
+nvramcui, tint...
+
+#### Pushing the coreboot-sdk image to hub.docker.com for use:
+
+When you’re satisfied with the testing, push the coreboot-sdk image to
+the hub.docker.com
+
+```
+$ make -C util/docker upload-coreboot-sdk
+```
+
+#### Building and pushing the coreboot-jenkins-node docker image:
+
+This docker image is pretty simple, so there’s not really any testing
+that needs to be done.
+
+```
+$ make -C util/docker coreboot-jenkins-node
+$ make -C util/docker upload-coreboot-jenkins-node
+```
+
+### Coverity Setup
+
+To run coverity jobs, the builder needs to have the tools available, and
+to be marked as a coverity builder.
+
+
+#### Set up the Coverity tools
+
+Download the Linux-64 coverity build tool and decompress it into your
+cache directory as defined by the `$COREBOOT_JENKINS_CACHE_DIR` variable
+
+[https://scan.coverity.com/download](https://scan.coverity.com/download)
+
+Rename the directory from its original name
+(cov-analysis-linux64-7.7.0.4) to ‘coverity’, or better, create a
+symlink:
+
+```
+ln -s cov-analysis-linux64-7.7.0.4 coverity
+```
+
+
+Let the admins know that the ‘coverity’ label can be added to the
+builder.
diff --git a/Documentation/infrastructure/index.md b/Documentation/infrastructure/index.md
new file mode 100644
index 0000000..42bcbf6
--- /dev/null
+++ b/Documentation/infrastructure/index.md
@@ -0,0 +1,6 @@
+# coreboot infrastructure
+
+This section contains documentation about coreboot infrastructure
+
+## Jenkins builders and builds
+[Setting up Jenkins build machines](builders.md)
To view, visit change 43984. To unsubscribe, or for help writing mail filters, visit settings.