coreboot-gerrit June 2021

coreboot-gerrit@coreboot.org

1 participants
7127 discussions

Change in coreboot[master]: nb/intel/sandybridge/gma.c: Correct deasserting force wake on IVB
by Evgeny Zinoviev (Code Review) 07 Aug '23

07 Aug '23

Evgeny Zinoviev has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/42455 ) Change subject: nb/intel/sandybridge/gma.c: Correct deasserting force wake on IVB ...................................................................... nb/intel/sandybridge/gma.c: Correct deasserting force wake on IVB Change-Id: I31f8cddb9408d0c23c558b51f5d1f8787f0b700f Signed-off-by: Evgeny Zinoviev <me(a)ch1p.io> --- M src/northbridge/intel/sandybridge/gma.c 1 file changed, 2 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/55/42455/1 diff --git a/src/northbridge/intel/sandybridge/gma.c b/src/northbridge/intel/sandybridge/gma.c index f9f318c..3e8d0de 100644 --- a/src/northbridge/intel/sandybridge/gma.c +++ b/src/northbridge/intel/sandybridge/gma.c @@ -510,7 +510,8 @@ gtt_write(0xa18c, gtt_read(0xa18c) & ~1); gtt_poll(0x130090, (1 << 0), (0 << 0)); } else { - gtt_write(0xa188, 0x1fffe); + gtt_write(0xa188, gtt_read(0xa188) & 0x1ffff); + gtt_write(0xa188, gtt_read(0xa188) & ~1); if (gtt_poll(0x130040, (1 << 0), (0 << 0))) gtt_write(0xa188, gtt_read(0xa188) | 1); } -- To view, visit https://review.coreboot.org/c/coreboot/+/42455 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I31f8cddb9408d0c23c558b51f5d1f8787f0b700f Gerrit-Change-Number: 42455 Gerrit-PatchSet: 1 Gerrit-Owner: Evgeny Zinoviev <me(a)ch1p.io> Gerrit-MessageType: newchange

4 12

Change in coreboot[master]: mainboard/volteer: Enable TcssD3Cold for FW CM
by Shreesh Chhabbi (Code Review) 07 Aug '23

07 Aug '23

Shreesh Chhabbi has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/42767 ) Change subject: mainboard/volteer: Enable TcssD3Cold for FW CM ...................................................................... mainboard/volteer: Enable TcssD3Cold for FW CM Enable TcssD3Cold for TCSS Firmware Connection Manager build. This is not tp be merged. It is only for cherrypicking. Change-Id: I6be7c286043020df58057343d622525357139a83 Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi(a)intel.com> --- M src/mainboard/google/volteer/variants/baseboard/devicetree.cb 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/67/42767/1 diff --git a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb index 705da1d..4d3b68a 100644 --- a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb @@ -167,7 +167,7 @@ # D3Hot and D3Cold for TCSS register "TcssD3HotEnable" = "1" - register "TcssD3ColdEnable" = "0" + register "TcssD3ColdEnable" = "1" # DP port register "DdiPortAConfig" = "1" # eDP -- To view, visit https://review.coreboot.org/c/coreboot/+/42767 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I6be7c286043020df58057343d622525357139a83 Gerrit-Change-Number: 42767 Gerrit-PatchSet: 1 Gerrit-Owner: Shreesh Chhabbi <shreesh.chhabbi(a)intel.com> Gerrit-MessageType: newchange

2 2

Change in coreboot[master]: sb/intel: Fix bad uses of `find_resource`
by Angel Pons (Code Review) 07 Aug '23

07 Aug '23

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/42802 ) Change subject: sb/intel: Fix bad uses of `find_resource` ...................................................................... sb/intel: Fix bad uses of `find_resource` The returned value of `find_resource` can never be null, as the function calls `probe_resource` and dies if it returned null. So, if southbridge code checks if the returned value of `find_resource` is null, replace it with `probe_resource` instead. Change-Id: I22e2e2ce046cc7ac6f2f2a814d694ff50a8dc89b Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M src/southbridge/intel/bd82x6x/azalia.c M src/southbridge/intel/bd82x6x/me.c M src/southbridge/intel/bd82x6x/me_8.x.c M src/southbridge/intel/bd82x6x/sata.c M src/southbridge/intel/bd82x6x/smbus.c M src/southbridge/intel/bd82x6x/usb_ehci.c M src/southbridge/intel/i82801gx/azalia.c M src/southbridge/intel/i82801gx/sata.c M src/southbridge/intel/i82801ix/hdaudio.c M src/southbridge/intel/i82801ix/sata.c M src/southbridge/intel/i82801jx/hdaudio.c M src/southbridge/intel/ibexpeak/azalia.c M src/southbridge/intel/ibexpeak/me.c M src/southbridge/intel/ibexpeak/smbus.c M src/southbridge/intel/ibexpeak/thermal.c M src/southbridge/intel/ibexpeak/usb_ehci.c M src/southbridge/intel/lynxpoint/azalia.c M src/southbridge/intel/lynxpoint/me_9.x.c M src/southbridge/intel/lynxpoint/serialio.c M src/southbridge/intel/lynxpoint/smbus.c 20 files changed, 25 insertions(+), 25 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/02/42802/1 diff --git a/src/southbridge/intel/bd82x6x/azalia.c b/src/southbridge/intel/bd82x6x/azalia.c index 4f5d8ca..4bb45e5 100644 --- a/src/southbridge/intel/bd82x6x/azalia.c +++ b/src/southbridge/intel/bd82x6x/azalia.c @@ -218,7 +218,7 @@ u32 reg32; /* Find base address */ - res = find_resource(dev, PCI_BASE_ADDRESS_0); + res = probe_resource(dev, PCI_BASE_ADDRESS_0); if (!res) return; diff --git a/src/southbridge/intel/bd82x6x/me.c b/src/southbridge/intel/bd82x6x/me.c index 03b954f..4d62b80 100644 --- a/src/southbridge/intel/bd82x6x/me.c +++ b/src/southbridge/intel/bd82x6x/me.c @@ -556,7 +556,7 @@ struct mei_csr host; /* Find the MMIO base for the ME interface */ - res = find_resource(dev, PCI_BASE_ADDRESS_0); + res = probe_resource(dev, PCI_BASE_ADDRESS_0); if (!res || res->base == 0 || res->size == 0) { printk(BIOS_DEBUG, "ME: MEI resource not present!\n"); return -1; diff --git a/src/southbridge/intel/bd82x6x/me_8.x.c b/src/southbridge/intel/bd82x6x/me_8.x.c index ff94a88..da2ef6a 100644 --- a/src/southbridge/intel/bd82x6x/me_8.x.c +++ b/src/southbridge/intel/bd82x6x/me_8.x.c @@ -541,7 +541,7 @@ struct mei_csr host; /* Find the MMIO base for the ME interface */ - res = find_resource(dev, PCI_BASE_ADDRESS_0); + res = probe_resource(dev, PCI_BASE_ADDRESS_0); if (!res || res->base == 0 || res->size == 0) { printk(BIOS_DEBUG, "ME: MEI resource not present!\n"); return -1; diff --git a/src/southbridge/intel/bd82x6x/sata.c b/src/southbridge/intel/bd82x6x/sata.c index 63801a2..2b03140 100644 --- a/src/southbridge/intel/bd82x6x/sata.c +++ b/src/southbridge/intel/bd82x6x/sata.c @@ -40,28 +40,28 @@ if (sata_mode != 2) return; - res = find_resource(dev, PCI_BASE_ADDRESS_0); + res = probe_resource(dev, PCI_BASE_ADDRESS_0); if (res) { res->base = 0x1f0; res->size = 8; res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; } - res = find_resource(dev, PCI_BASE_ADDRESS_1); + res = probe_resource(dev, PCI_BASE_ADDRESS_1); if (res) { res->base = 0x3f4; res->size = 4; res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; } - res = find_resource(dev, PCI_BASE_ADDRESS_2); + res = probe_resource(dev, PCI_BASE_ADDRESS_2); if (res) { res->base = 0x170; res->size = 8; res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; } - res = find_resource(dev, PCI_BASE_ADDRESS_3); + res = probe_resource(dev, PCI_BASE_ADDRESS_3); if (res) { res->base = 0x374; res->size = 4; @@ -77,7 +77,7 @@ if (sata_mode == 2) { unsigned int i; for (i = PCI_BASE_ADDRESS_0; i <= PCI_BASE_ADDRESS_3; i += 4) { - struct resource *const res = find_resource(dev, i); + struct resource *const res = probe_resource(dev, i); if (res) res->flags &= ~IORESOURCE_FIXED; } diff --git a/src/southbridge/intel/bd82x6x/smbus.c b/src/southbridge/intel/bd82x6x/smbus.c index dcd2724..e5255d3 100644 --- a/src/southbridge/intel/bd82x6x/smbus.c +++ b/src/southbridge/intel/bd82x6x/smbus.c @@ -21,7 +21,7 @@ pci_write_config32(dev, 0x80, reg16); /* Set Receive Slave Address */ - res = find_resource(dev, PCI_BASE_ADDRESS_4); + res = probe_resource(dev, PCI_BASE_ADDRESS_4); if (res) smbus_set_slave_addr(res->base, SMBUS_SLAVE_ADDR); } diff --git a/src/southbridge/intel/bd82x6x/usb_ehci.c b/src/southbridge/intel/bd82x6x/usb_ehci.c index 8bc45f6..2764861 100644 --- a/src/southbridge/intel/bd82x6x/usb_ehci.c +++ b/src/southbridge/intel/bd82x6x/usb_ehci.c @@ -43,7 +43,7 @@ /* Enable writes to protected registers. */ pci_write_config8(dev, 0x80, access_cntl | 1); - res = find_resource(dev, PCI_BASE_ADDRESS_0); + res = probe_resource(dev, PCI_BASE_ADDRESS_0); if (res) { /* Number of ports and companion controllers. */ reg32 = read32((void *)(uintptr_t)(res->base + 4)); diff --git a/src/southbridge/intel/i82801gx/azalia.c b/src/southbridge/intel/i82801gx/azalia.c index 91f5857..5f8e89c 100644 --- a/src/southbridge/intel/i82801gx/azalia.c +++ b/src/southbridge/intel/i82801gx/azalia.c @@ -264,7 +264,7 @@ // pm_iowrite(0x59, 0xB); #endif - res = find_resource(dev, 0x10); + res = probe_resource(dev, 0x10); if (!res) return; diff --git a/src/southbridge/intel/i82801gx/sata.c b/src/southbridge/intel/i82801gx/sata.c index 6efdef7..7fb1433 100644 --- a/src/southbridge/intel/i82801gx/sata.c +++ b/src/southbridge/intel/i82801gx/sata.c @@ -132,7 +132,7 @@ /* Interrupt Pin is set by D31IP.PIP */ pci_write_config8(dev, INTR_LN, 0x0a); - struct resource *ahci_res = find_resource(dev, PCI_BASE_ADDRESS_5); + struct resource *ahci_res = probe_resource(dev, PCI_BASE_ADDRESS_5); if (ahci_res != NULL) /* write AHCI GHC_PI register */ write32(res2mmio(ahci_res, 0xc, 0), config->sata_ports_implemented); diff --git a/src/southbridge/intel/i82801ix/hdaudio.c b/src/southbridge/intel/i82801ix/hdaudio.c index c954f9c..3158000 100644 --- a/src/southbridge/intel/i82801ix/hdaudio.c +++ b/src/southbridge/intel/i82801ix/hdaudio.c @@ -228,7 +228,7 @@ /* Lock some R/WO bits by writing their current value. */ pci_update_config32(dev, 0x74, ~0, 0); - res = find_resource(dev, 0x10); + res = probe_resource(dev, 0x10); if (!res) return; diff --git a/src/southbridge/intel/i82801ix/sata.c b/src/southbridge/intel/i82801ix/sata.c index cac0375..8ac9bee 100644 --- a/src/southbridge/intel/i82801ix/sata.c +++ b/src/southbridge/intel/i82801ix/sata.c @@ -23,7 +23,7 @@ struct resource *res; /* Initialize AHCI memory-mapped space */ - res = find_resource(dev, PCI_BASE_ADDRESS_5); + res = probe_resource(dev, PCI_BASE_ADDRESS_5); if (!res) return; diff --git a/src/southbridge/intel/i82801jx/hdaudio.c b/src/southbridge/intel/i82801jx/hdaudio.c index ba20a6a..cb54243 100644 --- a/src/southbridge/intel/i82801jx/hdaudio.c +++ b/src/southbridge/intel/i82801jx/hdaudio.c @@ -228,7 +228,7 @@ /* Lock some R/WO bits by writing their current value. */ pci_update_config32(dev, 0x74, ~0, 0); - res = find_resource(dev, 0x10); + res = probe_resource(dev, 0x10); if (!res) return; diff --git a/src/southbridge/intel/ibexpeak/azalia.c b/src/southbridge/intel/ibexpeak/azalia.c index 59a384a..6bc9a4f 100644 --- a/src/southbridge/intel/ibexpeak/azalia.c +++ b/src/southbridge/intel/ibexpeak/azalia.c @@ -216,7 +216,7 @@ u32 reg32; /* Find base address */ - res = find_resource(dev, PCI_BASE_ADDRESS_0); + res = probe_resource(dev, PCI_BASE_ADDRESS_0); if (!res) return; diff --git a/src/southbridge/intel/ibexpeak/me.c b/src/southbridge/intel/ibexpeak/me.c index 2c9c87c..7e35d40 100644 --- a/src/southbridge/intel/ibexpeak/me.c +++ b/src/southbridge/intel/ibexpeak/me.c @@ -478,7 +478,7 @@ u16 reg16; /* Find the MMIO base for the ME interface */ - res = find_resource(dev, PCI_BASE_ADDRESS_0); + res = probe_resource(dev, PCI_BASE_ADDRESS_0); if (!res || res->base == 0 || res->size == 0) { printk(BIOS_DEBUG, "ME: MEI resource not present!\n"); return -1; diff --git a/src/southbridge/intel/ibexpeak/smbus.c b/src/southbridge/intel/ibexpeak/smbus.c index 7e9aa57..e5c43e5 100644 --- a/src/southbridge/intel/ibexpeak/smbus.c +++ b/src/southbridge/intel/ibexpeak/smbus.c @@ -20,7 +20,7 @@ pci_write_config32(dev, 0x80, reg16); /* Set Receive Slave Address */ - res = find_resource(dev, PCI_BASE_ADDRESS_4); + res = probe_resource(dev, PCI_BASE_ADDRESS_4); if (res) smbus_set_slave_addr(res->base, SMBUS_SLAVE_ADDR); } diff --git a/src/southbridge/intel/ibexpeak/thermal.c b/src/southbridge/intel/ibexpeak/thermal.c index 0b496da..3ff31e1 100644 --- a/src/southbridge/intel/ibexpeak/thermal.c +++ b/src/southbridge/intel/ibexpeak/thermal.c @@ -13,7 +13,7 @@ u8 *base; printk(BIOS_DEBUG, "Thermal init start.\n"); - res = find_resource(dev, 0x10); + res = probe_resource(dev, 0x10); if (!res) return; diff --git a/src/southbridge/intel/ibexpeak/usb_ehci.c b/src/southbridge/intel/ibexpeak/usb_ehci.c index 7ad9929..a597a56 100644 --- a/src/southbridge/intel/ibexpeak/usb_ehci.c +++ b/src/southbridge/intel/ibexpeak/usb_ehci.c @@ -36,7 +36,7 @@ /* Enable writes to protected registers. */ pci_write_config8(dev, 0x80, access_cntl | 1); - res = find_resource(dev, PCI_BASE_ADDRESS_0); + res = probe_resource(dev, PCI_BASE_ADDRESS_0); if (res) { /* Number of ports and companion controllers. */ reg32 = read32((u32 *)(uintptr_t)(res->base + 4)); diff --git a/src/southbridge/intel/lynxpoint/azalia.c b/src/southbridge/intel/lynxpoint/azalia.c index f415170..cc29efa 100644 --- a/src/southbridge/intel/lynxpoint/azalia.c +++ b/src/southbridge/intel/lynxpoint/azalia.c @@ -117,7 +117,7 @@ u32 codec_mask; /* Find base address */ - res = find_resource(dev, PCI_BASE_ADDRESS_0); + res = probe_resource(dev, PCI_BASE_ADDRESS_0); if (!res) return; diff --git a/src/southbridge/intel/lynxpoint/me_9.x.c b/src/southbridge/intel/lynxpoint/me_9.x.c index cdae271..658a4f4 100644 --- a/src/southbridge/intel/lynxpoint/me_9.x.c +++ b/src/southbridge/intel/lynxpoint/me_9.x.c @@ -727,7 +727,7 @@ struct mei_csr host; /* Find the MMIO base for the ME interface */ - res = find_resource(dev, PCI_BASE_ADDRESS_0); + res = probe_resource(dev, PCI_BASE_ADDRESS_0); if (!res || res->base == 0 || res->size == 0) { printk(BIOS_DEBUG, "ME: MEI resource not present!\n"); return -1; diff --git a/src/southbridge/intel/lynxpoint/serialio.c b/src/southbridge/intel/lynxpoint/serialio.c index 3973a8d..00bc691 100644 --- a/src/southbridge/intel/lynxpoint/serialio.c +++ b/src/southbridge/intel/lynxpoint/serialio.c @@ -140,10 +140,10 @@ pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); /* Find BAR0 and BAR1 */ - bar0 = find_resource(dev, PCI_BASE_ADDRESS_0); + bar0 = probe_resource(dev, PCI_BASE_ADDRESS_0); if (!bar0) return; - bar1 = find_resource(dev, PCI_BASE_ADDRESS_1); + bar1 = probe_resource(dev, PCI_BASE_ADDRESS_1); if (!bar1) return; diff --git a/src/southbridge/intel/lynxpoint/smbus.c b/src/southbridge/intel/lynxpoint/smbus.c index 39003f6..f88bd2b 100644 --- a/src/southbridge/intel/lynxpoint/smbus.c +++ b/src/southbridge/intel/lynxpoint/smbus.c @@ -20,7 +20,7 @@ pci_write_config32(dev, 0x80, reg16); /* Set Receive Slave Address */ - res = find_resource(dev, PCI_BASE_ADDRESS_4); + res = probe_resource(dev, PCI_BASE_ADDRESS_4); if (res) smbus_set_slave_addr(res->base, SMBUS_SLAVE_ADDR); } -- To view, visit https://review.coreboot.org/c/coreboot/+/42802 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I22e2e2ce046cc7ac6f2f2a814d694ff50a8dc89b Gerrit-Change-Number: 42802 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

5 7

Change in coreboot[master]: soc/amd/picasso: Enable paging on S3 resume
by Raul Rangel (Code Review) 07 Aug '23

07 Aug '23

Hello Furquan Shaikh, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/42888 to review the following change. Change subject: soc/amd/picasso: Enable paging on S3 resume ...................................................................... soc/amd/picasso: Enable paging on S3 resume This way we can prevent the BSP from accidentally stomping on OS memory. BUG=b:159081993 TEST=S3 suspend and resume to OS. See paging enabled message. Ran suspend_stress_test for 20+ cycles. Signed-off-by: Furquan Shaikh <furquan(a)google.com> Signed-off-by: Raul E Rangel <rrangel(a)google.com> Change-Id: I58fed6f297831b3cdc2758a5e7610388171d84d3 --- M src/soc/amd/picasso/Kconfig M src/soc/amd/picasso/Makefile.inc M src/soc/amd/picasso/bootblock/bootblock.c M src/soc/amd/picasso/chip.c M src/soc/amd/picasso/memlayout.ld A src/soc/amd/picasso/page_map_s3.txt 6 files changed, 64 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/88/42888/1 diff --git a/src/soc/amd/picasso/Kconfig b/src/soc/amd/picasso/Kconfig index 9860546..f9c653a 100644 --- a/src/soc/amd/picasso/Kconfig +++ b/src/soc/amd/picasso/Kconfig @@ -174,6 +174,12 @@ Sets the size of DRAM allocation for verstage in linker script if running as a separate stage on x86. +config PAGE_TABLE_ADDR + hex + default 0x2B0000 + help + Sets the address in DRAM where page tables should be loaded. + config RAMBASE hex default 0x10000000 diff --git a/src/soc/amd/picasso/Makefile.inc b/src/soc/amd/picasso/Makefile.inc index 39269e9..9d3bbd8 100644 --- a/src/soc/amd/picasso/Makefile.inc +++ b/src/soc/amd/picasso/Makefile.inc @@ -445,4 +445,15 @@ cpu_microcode_bins += $(wildcard 3rdparty/amd_blobs/picasso/PSP/UcodePatch_*.bin) +$(obj)/pt_s3.c $(obj)/pdpt_s3.c: src/soc/amd/picasso/page_map_s3.txt $(DOTCONFIG) util/x86/x86_page_tables.go + go run util/x86/x86_page_tables.go --iomap_file=$< --metadata_base_address=$(CONFIG_PAGE_TABLE_ADDR) --pdpt_output_c_file=$(obj)/pdpt_s3.c --pt_output_c_file=$(obj)/pt_s3.c + +cbfs-files-y += pt_s3 +pt_s3-file := $(obj)/pt_s3.c:struct +pt_s3-type := raw + +cbfs-files-y += pdpt_s3 +pdpt_s3-file := $(obj)/pdpt_s3.c:struct +pdpt_s3-type := raw + endif # ($(CONFIG_SOC_AMD_PICASSO),y) diff --git a/src/soc/amd/picasso/bootblock/bootblock.c b/src/soc/amd/picasso/bootblock/bootblock.c index a3935cc..ec30c19 100644 --- a/src/soc/amd/picasso/bootblock/bootblock.c +++ b/src/soc/amd/picasso/bootblock/bootblock.c @@ -4,6 +4,7 @@ #include <symbols.h> #include <bootblock_common.h> #include <console/console.h> +#include <cpu/x86/pae.h> #include <cpu/x86/cache.h> #include <cpu/x86/msr.h> #include <cpu/amd/msr.h> @@ -104,6 +105,17 @@ wrmsr(S3_RESUME_EIP_MSR, s3_resume_entry); } +static void enable_paging(void) +{ + paging_set_nxe(1); + paging_set_default_pat(); + if (acpi_is_wakeup_s3()) { + printk(BIOS_DEBUG, "Enabling S3 page tables\n"); + paging_enable_for_car("pdpt_s3", "pt_s3"); + } +} + + asmlinkage void bootblock_c_entry(uint64_t base_timestamp) { set_caching(); @@ -123,5 +135,7 @@ u32 val = cpuid_eax(1); printk(BIOS_DEBUG, "Family_Model: %08x\n", val); + enable_paging(); + fch_early_init(); } diff --git a/src/soc/amd/picasso/chip.c b/src/soc/amd/picasso/chip.c index 2e5fae5..2abe54e 100644 --- a/src/soc/amd/picasso/chip.c +++ b/src/soc/amd/picasso/chip.c @@ -1,6 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0-only */ +#include <bootstate.h> #include <console/console.h> +#include <cpu/x86/pae.h> #include <device/device.h> #include <device/pci.h> #include <drivers/i2c/designware/dw_i2c.h> @@ -173,9 +175,30 @@ southbridge_final(chip_info); } +static void picasso_disable_paging(void *unused) +{ + printk(BIOS_INFO, "%s: Disable Paging\n", __func__); + paging_disable_pae(); +} + +static void picasso_os_entry(void *unused) +{ + picasso_disable_paging(NULL); +} + struct chip_operations soc_amd_picasso_ops = { CHIP_NAME("AMD Picasso SOC") .enable_dev = enable_dev, .init = soc_init, .final = soc_final }; + +BOOT_STATE_INIT_ENTRY( + BS_PAYLOAD_BOOT, + BS_ON_ENTRY, + picasso_disable_paging, NULL); + +BOOT_STATE_INIT_ENTRY( + BS_OS_RESUME, + BS_ON_ENTRY, + picasso_os_entry, NULL); diff --git a/src/soc/amd/picasso/memlayout.ld b/src/soc/amd/picasso/memlayout.ld index 6f43ba1..27c72a2 100644 --- a/src/soc/amd/picasso/memlayout.ld +++ b/src/soc/amd/picasso/memlayout.ld @@ -89,6 +89,9 @@ VERSTAGE(CONFIG_VERSTAGE_ADDR, CONFIG_VERSTAGE_SIZE) #endif + REGION(pagetables, CONFIG_PAGE_TABLE_ADDR, 4096 * 12, 8) + REGION(pdpt, ., 32, 32) + EARLY_RESERVED_DRAM_END(.) RAMSTAGE(CONFIG_RAMBASE, 8M) diff --git a/src/soc/amd/picasso/page_map_s3.txt b/src/soc/amd/picasso/page_map_s3.txt new file mode 100644 index 0000000..a03796f --- /dev/null +++ b/src/soc/amd/picasso/page_map_s3.txt @@ -0,0 +1,7 @@ +0xd0000000, 0x100000000, UC, NX # All of MMIO +0xff000000, 0x100000000, WP, # memory-mapped SPI +0xcbd0b000, 0xd0000000, WB, # RAM for CBMEM and FSP +0x100000, 0x3BD000, WB, # RAM for lower memory usage +0xFF000, 0x100000, WB, # RAM for FSP AP Reset Vectors [0xFF000 - 0xFF1A4] +0xE0000, 0x100000, WB, # ACPI Reset Vector search area +0x30000, 0x40000, WB, # RAM for SIPI -- To view, visit https://review.coreboot.org/c/coreboot/+/42888 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I58fed6f297831b3cdc2758a5e7610388171d84d3 Gerrit-Change-Number: 42888 Gerrit-PatchSet: 1 Gerrit-Owner: Raul Rangel <rrangel(a)chromium.org> Gerrit-Reviewer: Furquan Shaikh <furquan(a)google.com> Gerrit-Reviewer: Julius Werner <jwerner(a)chromium.org> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

3 6

Change in coreboot[master]: RFC: soc/amd/picasso: Enable paging for boot
by Raul Rangel (Code Review) 07 Aug '23

07 Aug '23

Hello Furquan Shaikh, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/42889 to review the following change. Change subject: RFC: soc/amd/picasso: Enable paging for boot ...................................................................... RFC: soc/amd/picasso: Enable paging for boot This is WIP because I think we should dynamically map the 0-4KiB page when we need to write to that range. Otherwise dereferencing a null pointer is valid. BUG=b:159081993 TEST=Boot trembyle to the OS. Signed-off-by: Furquan Shaikh <furquan(a)google.com> Signed-off-by: Raul E Rangel <rrangel(a)chromium.org> Change-Id: I5d027a71cd32f6240fa004d813513b84a1ecfd26 --- M src/arch/x86/ebda.c M src/arch/x86/tables.c M src/device/oprom/realmode/x86.c M src/soc/amd/picasso/Makefile.inc M src/soc/amd/picasso/bootblock/bootblock.c A src/soc/amd/picasso/page_map.txt 6 files changed, 65 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/89/42889/1 diff --git a/src/arch/x86/ebda.c b/src/arch/x86/ebda.c index ea2d9d3..9c54359 100644 --- a/src/arch/x86/ebda.c +++ b/src/arch/x86/ebda.c @@ -5,6 +5,7 @@ #include <arch/ebda.h> #include <commonlib/endian.h> #include <console/console.h> +#include <cpu/x86/pae.h> static void *get_ebda_start(void) { @@ -29,7 +30,13 @@ ebda_kb = ebda_size >> 10; ebda = get_ebda_start(); - /* clear BIOS DATA AREA */ + /* + * We disable paging because the BDA is located between 0 - 4KiB. + * We don't want to map a page in this region because otherwise + * 0 will become a valid memory address + */ + paging_disable_pae(); + zero_n(X86_BDA_BASE, X86_BDA_SIZE); /* Avoid unaligned write16() since it's undefined behavior */ @@ -39,6 +46,8 @@ /* Set up EBDA */ zero_n(ebda, ebda_size); write_le16(ebda, ebda_kb); + + paging_enable_pae(); } void setup_default_ebda(void) diff --git a/src/arch/x86/tables.c b/src/arch/x86/tables.c index 492674c..3e2f19a 100644 --- a/src/arch/x86/tables.c +++ b/src/arch/x86/tables.c @@ -11,6 +11,7 @@ #include <string.h> #include <cbmem.h> #include <smbios.h> +#include <cpu/x86/pae.h> static unsigned long write_pirq_table(unsigned long rom_table_end) { @@ -200,8 +201,17 @@ if (CONFIG(GENERATE_SMBIOS_TABLES)) rom_table_end = write_smbios_table(rom_table_end); + /* + * We disable paging because the forwarding table is located + * between 0 - 4KiB. We don't want to map a page in this region because + * otherwise 0 will become a valid memory address + */ + paging_disable_pae(); + sz = write_coreboot_forwarding_table(forwarding_table, coreboot_table); + paging_enable_pae(); + forwarding_table += sz; /* Align up to page boundary for historical consistency. */ forwarding_table = ALIGN_UP(forwarding_table, 4*KiB); diff --git a/src/device/oprom/realmode/x86.c b/src/device/oprom/realmode/x86.c index 5215934..27bdf27 100644 --- a/src/device/oprom/realmode/x86.c +++ b/src/device/oprom/realmode/x86.c @@ -12,6 +12,7 @@ #include <pc80/i8254.h> #include <string.h> #include <vbe.h> +#include <cpu/x86/pae.h> /* we use x86emu's register file representation */ #include <x86emu/regs.h> @@ -303,6 +304,8 @@ { printk(BIOS_DEBUG, "VBE: Getting information about VESA mode %04x\n", mi->video_mode); + + paging_disable_pae(); char *buffer = PTR_TO_REAL_MODE(__realmode_buffer); u16 buffer_seg = (((unsigned long)buffer) >> 4) & 0xff00; u16 buffer_adr = ((unsigned long)buffer) & 0xffff; @@ -312,6 +315,9 @@ die("\nError: In %s function\n", __func__); memcpy(mi->mode_info_block, buffer, sizeof(mi->mode_info_block)); mode_info_valid = 1; + + paging_enable_pae(); + return 0; } @@ -322,10 +328,12 @@ mi->video_mode |= (1 << 14); // request clearing of framebuffer mi->video_mode &= ~(1 << 15); + paging_disable_pae(); X86_EAX = realmode_interrupt(0x10, VESA_SET_MODE, mi->video_mode, 0x0000, 0x0000, 0x0000, 0x0000); if (vbe_check_for_failure(X86_AH)) die("\nError: In %s function\n", __func__); + paging_enable_pae(); return 0; } @@ -356,10 +364,13 @@ void vbe_textmode_console(void) { delay(2); + + paging_disable_pae(); X86_EAX = realmode_interrupt(0x10, 0x0003, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000); if (vbe_check_for_failure(X86_AH)) die("\nError: In %s function\n", __func__); + paging_enable_pae(); } int fill_lb_framebuffer(struct lb_framebuffer *framebuffer) @@ -409,6 +420,13 @@ /* Set up C interrupt handlers */ setup_interrupt_handlers(); + /* + * We disable paging because the IDT and Option ROM are located between + * 0 - 4KiB. We don't want to map a page in this region because + * otherwise 0 will become a valid memory address. + */ + paging_disable_pae(); + /* Set up real-mode IDT */ setup_realmode_idt(); @@ -419,6 +437,9 @@ /* TODO ES:DI Pointer to System BIOS PnP Installation Check Structure */ /* Option ROM entry point is at OPROM start + 3 */ realmode_call(addr + 0x0003, num_dev, 0xffff, 0x0000, 0xffff, 0x0, 0x0); + + paging_enable_pae(); + printk(BIOS_DEBUG, "... Option ROM returned.\n"); #if CONFIG(FRAMEBUFFER_SET_VESA_MODE) diff --git a/src/soc/amd/picasso/Makefile.inc b/src/soc/amd/picasso/Makefile.inc index 9d3bbd8..5b0be65 100644 --- a/src/soc/amd/picasso/Makefile.inc +++ b/src/soc/amd/picasso/Makefile.inc @@ -445,6 +445,17 @@ cpu_microcode_bins += $(wildcard 3rdparty/amd_blobs/picasso/PSP/UcodePatch_*.bin) +$(obj)/pt.c $(obj)/pdpt.c: src/soc/amd/picasso/page_map.txt $(DOTCONFIG) util/x86/x86_page_tables.go + go run util/x86/x86_page_tables.go --iomap_file=$< --metadata_base_address=$(CONFIG_PAGE_TABLE_ADDR) --pdpt_output_c_file=$(obj)/pdpt.c --pt_output_c_file=$(obj)/pt.c + +cbfs-files-y += pt +pt-file := $(obj)/pt.c:struct +pt-type := raw + +cbfs-files-y += pdpt +pdpt-file := $(obj)/pdpt.c:struct +pdpt-type := raw + $(obj)/pt_s3.c $(obj)/pdpt_s3.c: src/soc/amd/picasso/page_map_s3.txt $(DOTCONFIG) util/x86/x86_page_tables.go go run util/x86/x86_page_tables.go --iomap_file=$< --metadata_base_address=$(CONFIG_PAGE_TABLE_ADDR) --pdpt_output_c_file=$(obj)/pdpt_s3.c --pt_output_c_file=$(obj)/pt_s3.c diff --git a/src/soc/amd/picasso/bootblock/bootblock.c b/src/soc/amd/picasso/bootblock/bootblock.c index ec30c19..b82f99f 100644 --- a/src/soc/amd/picasso/bootblock/bootblock.c +++ b/src/soc/amd/picasso/bootblock/bootblock.c @@ -112,6 +112,9 @@ if (acpi_is_wakeup_s3()) { printk(BIOS_DEBUG, "Enabling S3 page tables\n"); paging_enable_for_car("pdpt_s3", "pt_s3"); + } else { + printk(BIOS_DEBUG, "Enabling page tables\n"); + paging_enable_for_car("pdpt", "pt"); } } diff --git a/src/soc/amd/picasso/page_map.txt b/src/soc/amd/picasso/page_map.txt new file mode 100644 index 0000000..0fd224b --- /dev/null +++ b/src/soc/amd/picasso/page_map.txt @@ -0,0 +1,10 @@ +0xd0000000, 0x100000000, UC, NX # All of MMIO +0xff000000, 0x100000000, WP, # memory-mapped SPI +0xcbd0b000, 0xd0000000, WB, # RAM for CBMEM and FSP +0x30000000, 0x3023f000, WB, # RAM for payload +0x100000, 0x3BD000, WB, # RAM for lower memory usage +0xc0000, 0x100000, WB, # RAM for option ROM + EBDA [0xf6000 - 0xf6400] + IDT [0x0xff065 + 0xff84d + 0xff841 + 0xfec59 + 0xfe739 + 0xff859 + 0xfe82e + 0xfefd2 + 0xffe6e] +0xa0000, 0xc0000, UC, NX # VGA +0x30000, 0x40000, WB, # RAM for SIPI +0x1000, 0x2000, WB, # RAM for IDT stub code [0x1000 - 0x1900] +# 0x0, 0x1000, WB, # RAM for BDA [0x400 - 0x600] + CB forwarding table [0x500 - 0x1000] -- To view, visit https://review.coreboot.org/c/coreboot/+/42889 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I5d027a71cd32f6240fa004d813513b84a1ecfd26 Gerrit-Change-Number: 42889 Gerrit-PatchSet: 1 Gerrit-Owner: Raul Rangel <rrangel(a)chromium.org> Gerrit-Reviewer: Furquan Shaikh <furquan(a)google.com> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

3 4

Change in coreboot[master]: post_code: add missing postcode calls
by Sindhoor Tilak (Code Review) 07 Aug '23

07 Aug '23

Sindhoor Tilak has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/43000 ) Change subject: post_code: add missing postcode calls ...................................................................... post_code: add missing postcode calls The change adds postcode calls wherever necessary on top of the updated set of postcode defines Change-Id: Ia75cd863bf6ffac2c91ff78aefabc5327b1c138b Signed-off-by: Sindhoor Tilak <sindhoor(a)sin9yt.net> --- M src/arch/x86/postcar_loader.c M src/console/init.c M src/cpu/intel/car/p3/cache_as_ram.S M src/cpu/intel/car/p4-netburst/cache_as_ram.S M src/cpu/intel/haswell/romstage.c M src/drivers/amd/agesa/romstage.c M src/drivers/intel/fsp1_1/cache_as_ram.S M src/northbridge/intel/sandybridge/raminit_mrc.c M src/soc/intel/common/block/cpu/car/cache_as_ram_fsp.S M src/soc/intel/xeon_sp/romstage.c 10 files changed, 11 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/00/43000/1 diff --git a/src/arch/x86/postcar_loader.c b/src/arch/x86/postcar_loader.c index f79c90c..7b3088f 100644 --- a/src/arch/x86/postcar_loader.c +++ b/src/arch/x86/postcar_loader.c @@ -104,6 +104,7 @@ postcar_frame_common_mtrrs(pcf); + post_code(POST_ENTRY_POST_CAR); run_postcar_phase(pcf); /* We do not return here. */ } diff --git a/src/console/init.c b/src/console/init.c index 1dba9ad..cfe2e2e 100644 --- a/src/console/init.c +++ b/src/console/init.c @@ -62,6 +62,7 @@ asmlinkage void console_init(void) { + post_code(POST_CONSOLE_READY); init_log_level(); if (CONFIG(DEBUG_CONSOLE_INIT)) diff --git a/src/cpu/intel/car/p3/cache_as_ram.S b/src/cpu/intel/car/p3/cache_as_ram.S index 7a96441..e0cebc1 100644 --- a/src/cpu/intel/car/p3/cache_as_ram.S +++ b/src/cpu/intel/car/p3/cache_as_ram.S @@ -20,6 +20,7 @@ xor %edx, %edx clear_fixed_mtrr: + post_code(POST_CAR_FIXED_MTRR) add $-2, %ebx movzwl fixed_mtrr_list(%ebx), %ecx wrmsr diff --git a/src/cpu/intel/car/p4-netburst/cache_as_ram.S b/src/cpu/intel/car/p4-netburst/cache_as_ram.S index 6481404..6ddcf19 100644 --- a/src/cpu/intel/car/p4-netburst/cache_as_ram.S +++ b/src/cpu/intel/car/p4-netburst/cache_as_ram.S @@ -23,6 +23,7 @@ andl $LAPIC_BASE_MSR_BOOTSTRAP_PROCESSOR, %eax jz ap_init + post_code(POST_CAR_FIXED_MTRR) /* Clear/disable fixed MTRRs */ mov $fixed_mtrr_list_size, %ebx xor %eax, %eax diff --git a/src/cpu/intel/haswell/romstage.c b/src/cpu/intel/haswell/romstage.c index 35566c4..f3090e7 100644 --- a/src/cpu/intel/haswell/romstage.c +++ b/src/cpu/intel/haswell/romstage.c @@ -18,6 +18,7 @@ int boot_mode; int wake_from_s3; + post_code(POST_ENTRY_ROMSTAGE); enable_lapic(); wake_from_s3 = early_pch_init(params->gpio_map, params->rcba_config); diff --git a/src/drivers/amd/agesa/romstage.c b/src/drivers/amd/agesa/romstage.c index 617416a..4a65cab 100644 --- a/src/drivers/amd/agesa/romstage.c +++ b/src/drivers/amd/agesa/romstage.c @@ -84,6 +84,7 @@ postcar_frame_init(&pcf, HIGH_ROMSTAGE_STACK_SIZE); recover_postcar_frame(&pcf, cb->s3resume); + post_code(POST_ENTRY_POST_CAR); run_postcar_phase(&pcf); /* We do not return. */ } diff --git a/src/drivers/intel/fsp1_1/cache_as_ram.S b/src/drivers/intel/fsp1_1/cache_as_ram.S index 2a7678e..8ffcbcc 100644 --- a/src/drivers/intel/fsp1_1/cache_as_ram.S +++ b/src/drivers/intel/fsp1_1/cache_as_ram.S @@ -51,12 +51,14 @@ movl $(~(CACHE_ROM_SIZE - 1) | MTRR_PHYS_MASK_VALID), %eax wrmsr + post_code(POST_CAR_INIT_CACHE) /* Enable cache */ movl %cr0, %eax andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax invd movl %eax, %cr0 + post_code(POST_CAR_MTRR_ENABLE) /* Enable MTRR. */ movl $MTRR_DEF_TYPE_MSR, %ecx rdmsr diff --git a/src/northbridge/intel/sandybridge/raminit_mrc.c b/src/northbridge/intel/sandybridge/raminit_mrc.c index aa7d677..aaa7f81 100644 --- a/src/northbridge/intel/sandybridge/raminit_mrc.c +++ b/src/northbridge/intel/sandybridge/raminit_mrc.c @@ -363,6 +363,7 @@ pei_data.boot_mode = s3resume ? 2 : 0; timestamp_add_now(TS_BEFORE_INITRAM); + post_code(POST_ROM_SDRAM_INIT); sdram_initialize(&pei_data); /* Sanity check mrc_var location by verifying a known field */ diff --git a/src/soc/intel/common/block/cpu/car/cache_as_ram_fsp.S b/src/soc/intel/common/block/cpu/car/cache_as_ram_fsp.S index 5932fe6..69633ae 100644 --- a/src/soc/intel/common/block/cpu/car/cache_as_ram_fsp.S +++ b/src/soc/intel/common/block/cpu/car/cache_as_ram_fsp.S @@ -87,6 +87,7 @@ movd %mm1, %eax push %eax + post_code(POST_ENTRY_C_BOOTBLOCK) /* We can call into C functions now */ call bootblock_c_entry diff --git a/src/soc/intel/xeon_sp/romstage.c b/src/soc/intel/xeon_sp/romstage.c index 02ed7eb..86e121e 100644 --- a/src/soc/intel/xeon_sp/romstage.c +++ b/src/soc/intel/xeon_sp/romstage.c @@ -41,6 +41,7 @@ /* Cache the memory-mapped boot media. */ postcar_frame_add_romcache(&pcf, MTRR_TYPE_WRPROT); + post_code(POST_ENTRY_POST_CAR); run_postcar_phase(&pcf); } -- To view, visit https://review.coreboot.org/c/coreboot/+/43000 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ia75cd863bf6ffac2c91ff78aefabc5327b1c138b Gerrit-Change-Number: 43000 Gerrit-PatchSet: 1 Gerrit-Owner: Sindhoor Tilak <sindhoor(a)sin9yt.net> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Huang Jin <huang.jin(a)intel.com> Gerrit-Reviewer: Lee Leahy <leroy.p.leahy(a)intel.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

7 17

Change in coreboot[master]: post_code: delete unneeded postcode calls
by Sindhoor Tilak (Code Review) 07 Aug '23

07 Aug '23

Sindhoor Tilak has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/43132 ) Change subject: post_code: delete unneeded postcode calls ...................................................................... post_code: delete unneeded postcode calls This change removes postcode calls that are either duplicated or not needed anymore Change-Id: I44e94e64585cdaf9f3d6506fc92e1845c39254f1 Signed-off-by: Sindhoor Tilak <sindhoor(a)sin9yt.net> --- M src/cpu/intel/car/core2/cache_as_ram.S M src/cpu/intel/car/non-evict/cache_as_ram.S M src/cpu/intel/car/non-evict/exit_car.S M src/cpu/intel/car/p3/cache_as_ram.S M src/cpu/intel/car/p4-netburst/exit_car.S M src/cpu/intel/haswell/romstage.c M src/cpu/qemu-x86/bootblock.c M src/drivers/intel/fsp1_1/romstage.c M src/mainboard/amd/thatcher/bootblock.c M src/northbridge/intel/sandybridge/romstage.c M src/soc/amd/picasso/romstage.c M src/soc/intel/broadwell/romstage/romstage.c 12 files changed, 0 insertions(+), 12 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/32/43132/1 diff --git a/src/cpu/intel/car/core2/cache_as_ram.S b/src/cpu/intel/car/core2/cache_as_ram.S index c3f81fa..c59cfb4 100644 --- a/src/cpu/intel/car/core2/cache_as_ram.S +++ b/src/cpu/intel/car/core2/cache_as_ram.S @@ -87,7 +87,6 @@ xorl %edx, %edx wrmsr - post_code(0x24) /* Set Cache-as-RAM mask. */ movl $(MTRR_PHYS_MASK(0)), %ecx rdmsr diff --git a/src/cpu/intel/car/non-evict/cache_as_ram.S b/src/cpu/intel/car/non-evict/cache_as_ram.S index 6095126..5f6e9f5 100644 --- a/src/cpu/intel/car/non-evict/cache_as_ram.S +++ b/src/cpu/intel/car/non-evict/cache_as_ram.S @@ -92,7 +92,6 @@ xorl %edx, %edx wrmsr - post_code(0x24) /* Set Cache-as-RAM mask. */ movl $(MTRR_PHYS_MASK(0)), %ecx rdmsr diff --git a/src/cpu/intel/car/non-evict/exit_car.S b/src/cpu/intel/car/non-evict/exit_car.S index 4cfe75c..b137e77 100644 --- a/src/cpu/intel/car/non-evict/exit_car.S +++ b/src/cpu/intel/car/non-evict/exit_car.S @@ -34,7 +34,6 @@ andl $~1, %eax wrmsr - post_code(0x32) /* Return to caller. */ jmp *%esp diff --git a/src/cpu/intel/car/p3/cache_as_ram.S b/src/cpu/intel/car/p3/cache_as_ram.S index 1cb0cc7..56bb5f3 100644 --- a/src/cpu/intel/car/p3/cache_as_ram.S +++ b/src/cpu/intel/car/p3/cache_as_ram.S @@ -49,7 +49,6 @@ andl $(~0x00000cff), %eax wrmsr - post_code(0x22) /* Determine CPU_ADDR_BITS and load PHYSMASK high word to %edx. */ movl $1, %eax diff --git a/src/cpu/intel/car/p4-netburst/exit_car.S b/src/cpu/intel/car/p4-netburst/exit_car.S index 5489bb4..d0e3ee0 100644 --- a/src/cpu/intel/car/p4-netburst/exit_car.S +++ b/src/cpu/intel/car/p4-netburst/exit_car.S @@ -25,7 +25,6 @@ andl $(~MTRR_DEF_TYPE_EN), %eax wrmsr - post_code(0x32) /* Return to caller. */ jmp *%esp diff --git a/src/cpu/intel/haswell/romstage.c b/src/cpu/intel/haswell/romstage.c index f3090e7..7a666b0 100644 --- a/src/cpu/intel/haswell/romstage.c +++ b/src/cpu/intel/haswell/romstage.c @@ -46,7 +46,6 @@ if (wake_from_s3) enable_usb_bar(); - post_code(0x3a); params->pei_data->boot_mode = boot_mode; timestamp_add_now(TS_BEFORE_INITRAM); diff --git a/src/cpu/qemu-x86/bootblock.c b/src/cpu/qemu-x86/bootblock.c index 1b46403e..99b9939 100644 --- a/src/cpu/qemu-x86/bootblock.c +++ b/src/cpu/qemu-x86/bootblock.c @@ -6,7 +6,6 @@ asmlinkage void bootblock_c_entry_bist(uint64_t base_timestamp, uint32_t bist) { - post_code(0x05); /* Halt if there was a built in self test failure */ if (bist) { diff --git a/src/drivers/intel/fsp1_1/romstage.c b/src/drivers/intel/fsp1_1/romstage.c index cf11179..58206b2 100644 --- a/src/drivers/intel/fsp1_1/romstage.c +++ b/src/drivers/intel/fsp1_1/romstage.c @@ -100,7 +100,6 @@ .chipset_context = fih, }; - post_code(0x30); timestamp_add_now(TS_START_ROMSTAGE); diff --git a/src/mainboard/amd/thatcher/bootblock.c b/src/mainboard/amd/thatcher/bootblock.c index ae76b72..cf23654 100644 --- a/src/mainboard/amd/thatcher/bootblock.c +++ b/src/mainboard/amd/thatcher/bootblock.c @@ -10,7 +10,6 @@ void bootblock_mainboard_early_init(void) { - post_code(0x30); post_code(POST_ROM_SOC_EARLY_INIT); gpio_100_write8(0x1, 0x98); diff --git a/src/northbridge/intel/sandybridge/romstage.c b/src/northbridge/intel/sandybridge/romstage.c index d2833d7..6278cac 100644 --- a/src/northbridge/intel/sandybridge/romstage.c +++ b/src/northbridge/intel/sandybridge/romstage.c @@ -78,5 +78,4 @@ northbridge_romstage_finalize(s3resume); - post_code(0x3f); } diff --git a/src/soc/amd/picasso/romstage.c b/src/soc/amd/picasso/romstage.c index f8cff23..ea2c920 100644 --- a/src/soc/amd/picasso/romstage.c +++ b/src/soc/amd/picasso/romstage.c @@ -83,7 +83,6 @@ mainboard_romstage_entry_s3(s3_resume); elog_boot_notify(s3_resume); - post_code(0x42); u32 val = cpuid_eax(1); printk(BIOS_DEBUG, "Family_Model: %08x\n", val); diff --git a/src/soc/intel/broadwell/romstage/romstage.c b/src/soc/intel/broadwell/romstage/romstage.c index 2493b41..2ab502c 100644 --- a/src/soc/intel/broadwell/romstage/romstage.c +++ b/src/soc/intel/broadwell/romstage/romstage.c @@ -34,7 +34,6 @@ { struct romstage_params rp = { 0 }; - post_code(0x30); /* System Agent Early Initialization */ systemagent_early_init(); -- To view, visit https://review.coreboot.org/c/coreboot/+/43132 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I44e94e64585cdaf9f3d6506fc92e1845c39254f1 Gerrit-Change-Number: 43132 Gerrit-PatchSet: 1 Gerrit-Owner: Sindhoor Tilak <sindhoor(a)sin9yt.net> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Huang Jin <huang.jin(a)intel.com> Gerrit-Reviewer: Lee Leahy <leroy.p.leahy(a)intel.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

3 4

Change in coreboot[master]: [TESTME] nb/intel/i945/early_init.c: Detect DMI link width
by Angel Pons (Code Review) 07 Aug '23

07 Aug '23

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/43226 ) Change subject: [TESTME] nb/intel/i945/early_init.c: Detect DMI link width ...................................................................... [TESTME] nb/intel/i945/early_init.c: Detect DMI link width UNTESTED. Change-Id: I79829fa8fc9b26abca9983b1e3dc3a137a0ba49b Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M src/northbridge/intel/i945/early_init.c 1 file changed, 6 insertions(+), 5 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/26/43226/1 diff --git a/src/northbridge/intel/i945/early_init.c b/src/northbridge/intel/i945/early_init.c index f388330..cb5b520 100644 --- a/src/northbridge/intel/i945/early_init.c +++ b/src/northbridge/intel/i945/early_init.c @@ -399,11 +399,12 @@ reg32 = DMIBAR32(0x204); reg32 &= ~0x3ff; -#if 1 - reg32 |= 0x13f; /* for x4 DMI only */ -#else - reg32 |= 0x1e4; /* for x2 DMI only */ -#endif + + if (((DMIBAR16(DMILSTS) >> 4) & 0xf) == 2) + reg32 |= 0x1e4; /* for x2 DMI only */ + else + reg32 |= 0x13f; /* for x4 DMI only */ + DMIBAR32(0x204) = reg32; if (pci_read_config8(PCI_DEV(0, 0x0, 0), DEVEN) & (DEVEN_D2F0 | DEVEN_D2F1)) { -- To view, visit https://review.coreboot.org/c/coreboot/+/43226 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I79829fa8fc9b26abca9983b1e3dc3a137a0ba49b Gerrit-Change-Number: 43226 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: newchange

4 12

Change in coreboot[master]: mb/google/volteer: Add new variant Lingcod
by Tommie Lin (Code Review) 07 Aug '23

07 Aug '23

Tommie Lin has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/43442 ) Change subject: mb/google/volteer: Add new variant Lingcod ...................................................................... mb/google/volteer: Add new variant Lingcod This commit creates new Lingcod variant for Volteer. BUG=b:161103776 BRANCH=volteer TEST=emerge-volteer coreboot Change-Id: I6f79431d3948788ce27ae14b469ffc229ebf8b6a Signed-off-by: tong.lin <tong.lin(a)bitland.corp-partner.google.com> --- M src/mainboard/google/volteer/Kconfig M src/mainboard/google/volteer/Kconfig.name A src/mainboard/google/volteer/variants/lingcod/Makefile.inc A src/mainboard/google/volteer/variants/lingcod/gpio.c A src/mainboard/google/volteer/variants/lingcod/include/variant/ec.h A src/mainboard/google/volteer/variants/lingcod/include/variant/gpio.h A src/mainboard/google/volteer/variants/lingcod/memory.c A src/mainboard/google/volteer/variants/lingcod/memory/Makefile.inc A src/mainboard/google/volteer/variants/lingcod/memory/dram_id.generated.txt A src/mainboard/google/volteer/variants/lingcod/memory/mem_list_variant.txt A src/mainboard/google/volteer/variants/lingcod/overridetree.cb 11 files changed, 312 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/42/43442/1 diff --git a/src/mainboard/google/volteer/Kconfig b/src/mainboard/google/volteer/Kconfig index 16834ae..ab85d22 100644 --- a/src/mainboard/google/volteer/Kconfig +++ b/src/mainboard/google/volteer/Kconfig @@ -68,6 +68,7 @@ config MAINBOARD_PART_NUMBER string default "Halvor" if BOARD_GOOGLE_HALVOR + default "Lingcod" if BOARD_GOOGLE_LINGCOD default "Malefor" if BOARD_GOOGLE_MALEFOR default "Terrador" if BOARD_GOOGLE_TERRADOR default "Trondo" if BOARD_GOOGLE_TRONDO @@ -101,6 +102,7 @@ config VARIANT_DIR string default "halvor" if BOARD_GOOGLE_HALVOR + default "lingcod" if BOARD_GOOGLE_LINGCOD default "malefor" if BOARD_GOOGLE_MALEFOR default "terrador" if BOARD_GOOGLE_TERRADOR default "trondo" if BOARD_GOOGLE_TRONDO diff --git a/src/mainboard/google/volteer/Kconfig.name b/src/mainboard/google/volteer/Kconfig.name index 8e6d884..88c6277 100644 --- a/src/mainboard/google/volteer/Kconfig.name +++ b/src/mainboard/google/volteer/Kconfig.name @@ -5,6 +5,11 @@ select BOARD_GOOGLE_BASEBOARD_VOLTEER select SOC_INTEL_CSE_LITE_SKU +config BOARD_GOOGLE_LINGCOD + bool "-> Lingcod" + select BOARD_GOOGLE_BASEBOARD_VOLTEER + select SOC_INTEL_CSE_LITE_SKU + config BOARD_GOOGLE_MALEFOR bool "-> Malefor" select BOARD_GOOGLE_BASEBOARD_VOLTEER diff --git a/src/mainboard/google/volteer/variants/lingcod/Makefile.inc b/src/mainboard/google/volteer/variants/lingcod/Makefile.inc new file mode 100644 index 0000000..343c7db --- /dev/null +++ b/src/mainboard/google/volteer/variants/lingcod/Makefile.inc @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0-only + +romstage-y += memory.c + +bootblock-y += gpio.c + +ramstage-y += gpio.c diff --git a/src/mainboard/google/volteer/variants/lingcod/gpio.c b/src/mainboard/google/volteer/variants/lingcod/gpio.c new file mode 100644 index 0000000..cdffb60 --- /dev/null +++ b/src/mainboard/google/volteer/variants/lingcod/gpio.c @@ -0,0 +1,203 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> + +/* Pad configuration in ramstage */ +/* Leave eSPI pins untouched from default settings */ +static const struct pad_config gpio_table[] = { + /* A0 thru A6 come configured out of reset, do not touch */ + /* A0 : ESPI_IO0 ==> ESPI_IO_0 */ + /* A1 : ESPI_IO1 ==> ESPI_IO_1 */ + /* A2 : ESPI_IO2 ==> ESPI_IO_2 */ + /* A3 : ESPI_IO3 ==> ESPI_IO_3 */ + /* A4 : ESPI_CS# ==> ESPI_CS_L */ + /* A5 : ESPI_CLK ==> ESPI_CLK */ + /* A6 : ESPI_RESET# ==> NC(TP764) */ + /* A7 : I2S2_SCLK ==> EN_PP3300_TRACKPAD */ + PAD_CFG_GPO(GPP_A7, 1, DEEP), + /* A8 : I2S2_SFRM ==> EN_PP3300_TOUCHSCREEN */ + PAD_CFG_GPO(GPP_A8, 0, DEEP), + /* A10 : I2S2_RXD ==> EN_SPKR_PA */ + PAD_CFG_GPO(GPP_A10, 1, DEEP), + /* A13 : PMC_I2C_SCL ==> BT_DISABLE_L */ + PAD_CFG_GPO(GPP_A13, 1, DEEP), + /* A16 : USB_OC3# ==> USB_C0_OC_ODL */ + PAD_CFG_NF(GPP_A16, NONE, DEEP, NF1), + /* A18 : DDSP_HPDB ==> HDMI_HPD */ + PAD_CFG_NF(GPP_A18, NONE, DEEP, NF1), + /* A19 : DDSP_HPD1 ==> USB_C0_DP_HPD */ + PAD_CFG_NF(GPP_A19, NONE, DEEP, NF1), + /* A20 : DDSP_HPD2 ==> USB_C1_DP_HPD */ + PAD_CFG_NF(GPP_A20, NONE, DEEP, NF1), + /* A21 : DDPC_CTRCLK ==> EN_FP_PWR */ + PAD_CFG_GPO(GPP_A21, 1, DEEP), + /* A22 : DDPC_CTRLDATA ==> EN_HDMI_PWR */ + PAD_CFG_GPO(GPP_A22, 1, DEEP), + /* A23 : I2S1_SCLK ==> I2S1_SPKR_SCLK */ + PAD_CFG_NF(GPP_A23, NONE, DEEP, NF1), + + /* B2 : VRALERT# ==> NOT USED */ + PAD_NC(GPP_B2, NONE), + /* B3 : CPU_GP2 ==> PEN_DET_ODL */ + PAD_CFG_GPI(GPP_B3, NONE, DEEP), + /* B9 : I2C5_SDA ==> PCH_I2C5_TRACKPAD_SDA */ + PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1), + /* B10 : I2C5_SCL ==> PCH_I2C5_TRACKPAD_SCL */ + PAD_CFG_NF(GPP_B10, NONE, DEEP, NF1), + /* B19 : GSPI1_CS0# ==> PCH_GSPI1_FPMCU_CS_L */ + PAD_CFG_NF(GPP_B19, NONE, DEEP, NF1), + /* B20 : GSPI1_CLK ==> PCH_GSPI1_FPMCU_CLK */ + PAD_CFG_NF(GPP_B20, NONE, DEEP, NF1), + /* B21 : GSPI1_MISO ==> PCH_GSPI1_FPMCU_MISO */ + PAD_CFG_NF(GPP_B21, NONE, DEEP, NF1), + /* B22 : GSPI1_MOSI ==> PCH_GSPI1_GPMCU_MOSI */ + PAD_CFG_NF(GPP_B22, NONE, DEEP, NF1), + + /* C0 : SMBCLK ==> EN_PP3300_WLAN */ + PAD_CFG_GPO(GPP_C0, 1, DEEP), + /* C7 : SML1DATA ==> EN_USI_CHARGE */ + PAD_CFG_GPO(GPP_C7, 1, DEEP), + /* C10 : UART0_RTS# ==> USI_RST_L */ + PAD_CFG_GPO(GPP_C10, 0, DEEP), + /* C11 : UART0_CTS# ==> NOT USED */ + PAD_NC(GPP_C11, NONE), + /* C16 : I2C0_SDA ==> PCH_I2C0_1V8_AUDIO_SDA */ + PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1), + /* C17 : I2C0_SCL ==> PCH_I2C0_1V8_AUDIO_SCL */ + PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1), + /* C18 : I2C1_SDA ==> PCH_I2C1_TOUCH_USI_SDA */ + PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1), + /* C19 : I2C1_SCL ==> PCH_I2C1_TOUCH_USI_SCL */ + PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1), + /* C20 : UART2_RXD ==> FPMCU_INT_L */ + PAD_CFG_GPI_INT(GPP_C20, NONE, PLTRST, LEVEL), + /* C22 : UART2_RTS# ==> PCH_FPMCU_BOOT0 */ + PAD_CFG_GPO(GPP_C22, 0, DEEP), + /* C23 : UART2_CTS# ==> FPMCU_RST_ODL */ + PAD_CFG_GPO(GPP_C23, 1, DEEP), + + /* D5 : SRCCLKREQ0$ ==> SSD_CLKREQ_ODL */ + PAD_CFG_NF(GPP_D5, NONE, DEEP, NF1), + /* D6 : SRCCLKREQ1# ==> WLAN_CLKREQ_ODL */ + PAD_CFG_NF(GPP_D6, NONE, DEEP, NF1), + /* D8 : SRCCLKREQ3# ==> SD_CLKREQ_ODL */ + PAD_CFG_NF(GPP_D8, NONE, DEEP, NF1), + /* D16 : ISH_UART0_CTS# ==> EN_PP3300_SD */ + PAD_CFG_GPO(GPP_D16, 1, DEEP), + /* D17 : ISH_GP4 ==> EN_CVF_PWR */ + PAD_CFG_GPO(GPP_D17, 1, DEEP), + + /* E1 : SPI1_IO2 ==> PEN_DET_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_E1, NONE, DEEP, EDGE_SINGLE), + /* E2 : SPI1_IO3 ==> WLAN_PCIE_WAKE_ODL */ + PAD_CFG_GPI(GPP_E2, NONE, DEEP), + /* E3 : CPU_GP0 ==> USI_REPORT_EN */ + PAD_CFG_GPO(GPP_E3, 1, DEEP), + /* E4 : SATA_DEVSLP0 ==> M2_SSD_PE_WAKE_ODL */ + PAD_CFG_GPI(GPP_E4, NONE, DEEP), + /* E7 : CPU_GP1 ==> USI_INT */ + PAD_CFG_GPI_APIC(GPP_E7, NONE, PLTRST, LEVEL, NONE), + /* E11 : SPI1_CLK ==> SD_PE_WAKE_ODL */ + PAD_CFG_GPI(GPP_E11, NONE, DEEP), + /* E12 : SPI1_MISO_IO1 ==> PEN_ALERT_ODL */ + PAD_CFG_GPI(GPP_E12, NONE, DEEP), + /* E15 : ISH_GP6 ==> TRACKPAD_INT_ODL */ + PAD_CFG_GPI_IRQ_WAKE(GPP_E15, NONE, DEEP, LEVEL, INVERT), + + /* F6 : CNV_PA_BLANKING ==> NC */ + PAD_NC(GPP_F6, NONE), + /* F8 : I2S_MCLK2_INOUT ==> HP_INT_L */ + PAD_CFG_GPI_INT(GPP_F8, NONE, PLTRST, EDGE_BOTH), + /* F13 : GSXDOUT ==> WiFi_DISABLE_L */ + PAD_CFG_GPO(GPP_F13, 1, DEEP), + /* F19 : SRCCLKREQ6# ==> WLAN_INT_L */ + PAD_CFG_GPI_SCI_LOW(GPP_F19, NONE, DEEP, EDGE_SINGLE), + + /* H3 : SX_EXIT_HOLDOFF# ==> SD_PERST_L */ + PAD_CFG_GPO(GPP_H3, 1, DEEP), + /* H8 : I2C4_SDA ==> NC */ + PAD_NC(GPP_H8, NONE), + /* H9 : I2C4_SCL ==> NC */ + PAD_NC(GPP_H9, NONE), + /* H11 : SRCCLKREQ5# ==> WLAN_PERST_L */ + PAD_CFG_GPO(GPP_H11, 1, DEEP), + /* H16 : DDPB_CTRLCLK ==> DDPB_HDMI_CTRLCLK */ + PAD_CFG_NF(GPP_H16, NONE, DEEP, NF1), + /* H17 : DDPB_CTRLDATA ==> DDPB_HDMI_CTRLDATA */ + PAD_CFG_NF(GPP_H17, NONE, DEEP, NF1), + /* H19 : TIME_SYNC0 ==> USER_PRES_FP_ODL */ + PAD_CFG_GPI(GPP_H19, NONE, DEEP), + + /* R0 : HDA_BCLK ==> I2S0_HP_SCLK */ + PAD_CFG_NF(GPP_R0, NONE, DEEP, NF2), + /* R1 : HDA_SYNC ==> I2S0_HP_SFRM */ + PAD_CFG_NF(GPP_R1, NONE, DEEP, NF2), + /* R2 : HDA_SDO ==> I2S0_PCH_TX_HP_RX_STRAP */ + PAD_CFG_NF(GPP_R2, DN_20K, DEEP, NF2), + /* R3 : HDA_SDIO ==> I2S0_PCH_RX_HP_TX */ + PAD_CFG_NF(GPP_R3, NONE, DEEP, NF2), + /* R5 : HDA_SDI1 ==> I2S1_PCH_RX_SPKR_TX */ + PAD_CFG_NF(GPP_R5, NONE, DEEP, NF2), + /* R6 : I2S1_TXD ==> I2S1_PCH_RX_SPKR_RX */ + PAD_CFG_NF(GPP_R6, NONE, DEEP, NF2), + /* R7 : I2S1_SFRM ==> I2S1_SPKR_SFRM */ + PAD_CFG_NF(GPP_R7, NONE, DEEP, NF2), + + /* S6 : SNDW3_CLK ==> DMIC_CLK0 */ + PAD_CFG_NF(GPP_S6, NONE, DEEP, NF2), + /* S7 : SNDW3_DATA ==> DMIC_DATA0 */ + PAD_CFG_NF(GPP_S7, NONE, DEEP, NF2), +}; + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* A12 : SATAXPCIE1 ==> M2_SSD_PEDET */ + PAD_CFG_NF(GPP_A12, NONE, DEEP, NF1), + + /* A17 : DDSP_HPDC ==> MEM_CH_SEL */ + PAD_CFG_GPI(GPP_A17, NONE, DEEP), + + /* B11 : PMCALERT# ==> PCH_WP_OD */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_B11, NONE, DEEP), + + /* B15 : GSPI0_CS0# ==> PCH_GSPI0_H1_TPM_CS_L */ + PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1), + + /* B16 : GSPI0_CLK ==> PCH_GSPI0_H1_TPM_CLK */ + PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1), + + /* B17 : GSPI0_MISO ==> PCH_GSPIO_H1_TPM_MISO */ + PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), + + /* B18 : GSPI0_MOSI ==> PCH_GSPI0_H1_TPM_MOSI_STRAP */ + PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), + + /* C0 : SMBCLK ==> EN_PP3300_WLAN */ + PAD_CFG_GPO(GPP_C0, 1, DEEP), + + /* C21 : UART2_TXD ==> H1_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT), + + /* C22 : UART2_RTS# ==> PCH_FPMCU_BOOT0 */ + PAD_CFG_GPO(GPP_C22, 0, DEEP), + + /* E12 : SPI1_MISO_IO1 ==> PEN_ALERT_ODL */ + PAD_CFG_GPO(GPP_E12, 1, DEEP), + + /* H11 : SRCCLKREQ5# ==> WLAN_PERST_L */ + PAD_CFG_GPO(GPP_H11, 1, DEEP), +}; + +const struct pad_config *variant_override_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} diff --git a/src/mainboard/google/volteer/variants/lingcod/include/variant/ec.h b/src/mainboard/google/volteer/variants/lingcod/include/variant/ec.h new file mode 100644 index 0000000..4a9a461 --- /dev/null +++ b/src/mainboard/google/volteer/variants/lingcod/include/variant/ec.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __VARIANT_EC_H__ +#define __VARIANT_EC_H__ + +#include <baseboard/ec.h> + +#endif diff --git a/src/mainboard/google/volteer/variants/lingcod/include/variant/gpio.h b/src/mainboard/google/volteer/variants/lingcod/include/variant/gpio.h new file mode 100644 index 0000000..0075826 --- /dev/null +++ b/src/mainboard/google/volteer/variants/lingcod/include/variant/gpio.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_GPIO_H +#define VARIANT_GPIO_H + +#include <baseboard/gpio.h> + +/* Copied from baseboard and may need to change for the new variant. */ + +#endif diff --git a/src/mainboard/google/volteer/variants/lingcod/memory.c b/src/mainboard/google/volteer/variants/lingcod/memory.c new file mode 100644 index 0000000..5444c6f --- /dev/null +++ b/src/mainboard/google/volteer/variants/lingcod/memory.c @@ -0,0 +1,60 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/variants.h> + +static const struct lpddr4x_cfg malefor_memcfg = { + /* DQ byte map */ + .dq_map = { + [0] = { + { 3, 1, 0, 2, 4, 6, 7, 5, }, /* DDR0_DQ0[7:0] */ + { 12, 13, 14, 15, 8, 9, 10, 11 }, /* DDR0_DQ1[7:0] */ + }, + [1] = { + { 0, 7, 1, 6, 2, 4, 3, 5, }, /* DDR1_DQ0[7:0] */ + { 8, 15, 14, 9, 13, 10, 12, 11 }, /* DDR1_DQ1[7:0] */ + }, + [2] = { + { 3, 2, 0, 1, 4, 5, 6, 7, }, /* DDR2_DQ0[7:0] */ + { 12, 13, 15, 14, 8, 9, 10, 11 }, /* DDR2_DQ1[7:0] */ + }, + [3] = { + { 6, 0, 1, 7, 5, 4, 2, 3, }, /* DDR3_DQ0[7:0] */ + { 15, 14, 8, 9, 10, 12, 11, 13 }, /* DDR3_DQ1[7:0] */ + }, + [4] = { + { 5, 0, 1, 3, 4, 2, 7, 6, }, /* DDR4_DQ0[7:0] */ + { 11, 14, 13, 12, 8, 9, 15, 10 }, /* DDR4_DQ1[7:0] */ + }, + [5] = { + { 3, 4, 2, 5, 0, 6, 1, 7, }, /* DDR5_DQ0[7:0] */ + { 13, 12, 11, 10, 14, 15, 9, 8 }, /* DDR5_DQ1[7:0] */ + }, + [6] = { + { 3, 2, 1, 0, 5, 4, 7, 6, }, /* DDR6_DQ0[7:0] */ + { 12, 13, 15, 14, 8, 11, 9, 10 }, /* DDR6_DQ1[7:0] */ + }, + [7] = { + { 3, 4, 2, 5, 1, 0, 7, 6, }, /* DDR7_DQ0[7:0] */ + { 15, 14, 9, 8, 12, 10, 11, 13 }, /* DDR7_DQ1[7:0] */ + }, + }, + + /* DQS CPU<>DRAM map */ + .dqs_map = { + [0] = { 0, 1 }, /* DDR0_DQS[1:0] */ + [1] = { 0, 1 }, /* DDR1_DQS[1:0] */ + [2] = { 0, 1 }, /* DDR2_DQS[1:0] */ + [3] = { 0, 1 }, /* DDR3_DQS[1:0] */ + [4] = { 0, 1 }, /* DDR4_DQS[1:0] */ + [5] = { 0, 1 }, /* DDR5_DQS[1:0] */ + [6] = { 0, 1 }, /* DDR6_DQS[1:0] */ + [7] = { 0, 1 }, /* DDR7_DQS[1:0] */ + }, + + .ect = 1, /* Enable Early Command Training */ +}; + +const struct lpddr4x_cfg *variant_memory_params(void) +{ + return &malefor_memcfg; +} diff --git a/src/mainboard/google/volteer/variants/lingcod/memory/Makefile.inc b/src/mainboard/google/volteer/variants/lingcod/memory/Makefile.inc new file mode 100644 index 0000000..b0c7319 --- /dev/null +++ b/src/mainboard/google/volteer/variants/lingcod/memory/Makefile.inc @@ -0,0 +1,5 @@ +## SPDX-License-Identifier: GPL-2.0-or-later +## This is an auto-generated file. Do not edit!! + +SPD_SOURCES = +SPD_SOURCES += spd-1.hex # ID = 0(0b0000) Parts = K4U6E3S4AA-MGCR, MT53E512M32D2NP-046 WT:E, H9HCNNNBKMMLXR-NEE diff --git a/src/mainboard/google/volteer/variants/lingcod/memory/dram_id.generated.txt b/src/mainboard/google/volteer/variants/lingcod/memory/dram_id.generated.txt new file mode 100644 index 0000000..0b033c8 --- /dev/null +++ b/src/mainboard/google/volteer/variants/lingcod/memory/dram_id.generated.txt @@ -0,0 +1,4 @@ +DRAM Part Name ID to assign +K4U6E3S4AA-MGCR 0 (0000) +MT53E512M32D2NP-046 WT:E 0 (0000) +H9HCNNNBKMMLXR-NEE 0 (0000) diff --git a/src/mainboard/google/volteer/variants/lingcod/memory/mem_list_variant.txt b/src/mainboard/google/volteer/variants/lingcod/memory/mem_list_variant.txt new file mode 100644 index 0000000..dfce32c --- /dev/null +++ b/src/mainboard/google/volteer/variants/lingcod/memory/mem_list_variant.txt @@ -0,0 +1,3 @@ +K4U6E3S4AA-MGCR +MT53E512M32D2NP-046 WT:E +H9HCNNNBKMMLXR-NEE diff --git a/src/mainboard/google/volteer/variants/lingcod/overridetree.cb b/src/mainboard/google/volteer/variants/lingcod/overridetree.cb new file mode 100644 index 0000000..b12e47a --- /dev/null +++ b/src/mainboard/google/volteer/variants/lingcod/overridetree.cb @@ -0,0 +1,5 @@ +chip soc/intel/tigerlake + + device domain 0 on + end +end -- To view, visit https://review.coreboot.org/c/coreboot/+/43442 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I6f79431d3948788ce27ae14b469ffc229ebf8b6a Gerrit-Change-Number: 43442 Gerrit-PatchSet: 1 Gerrit-Owner: Tommie Lin <tong.lin(a)bitland.corp-partner.google.com> Gerrit-MessageType: newchange

6 34

Change in coreboot[master]: src/soc/intel: Enable PCH M.2 RTD3
by Shreesh Chhabbi (Code Review) 07 Aug '23

07 Aug '23

Hello Shreesh Chhabbi, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/43600 to review the following change. Change subject: src/soc/intel: Enable PCH M.2 RTD3 ...................................................................... src/soc/intel: Enable PCH M.2 RTD3 Change-Id: Ica28d6437a19f3e828b2320965866aba7f883898 Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi(a)intel.corp-partner.google.com> --- M src/mainboard/google/volteer/dsdt.asl M src/soc/intel/tigerlake/acpi/pcie.asl A src/soc/intel/tigerlake/acpi/pmc.asl 3 files changed, 1,424 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/00/43600/1 diff --git a/src/mainboard/google/volteer/dsdt.asl b/src/mainboard/google/volteer/dsdt.asl index 31897674..35e4bed 100644 --- a/src/mainboard/google/volteer/dsdt.asl +++ b/src/mainboard/google/volteer/dsdt.asl @@ -18,10 +18,13 @@ ) { #include <soc/intel/tigerlake/acpi/platform.asl> - + + // PMC IPC implementation + #include <soc/intel/tigerlake/acpi/pmc.asl> + // global NVS and variables #include <soc/intel/common/block/acpi/acpi/globalnvs.asl> - + // CPU #include <cpu/intel/common/acpi/cpu.asl> diff --git a/src/soc/intel/tigerlake/acpi/pcie.asl b/src/soc/intel/tigerlake/acpi/pcie.asl index a19feb7..7df7797 100644 --- a/src/soc/intel/tigerlake/acpi/pcie.asl +++ b/src/soc/intel/tigerlake/acpi/pcie.asl @@ -1,6 +1,10 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* Intel PCH PCIe support */ +#define R_PCH_PCIE_CFG_SPR 0xE0 +#define R_PCH_PCIE_CFG_MPC 0xD8 +#define R_PCH_PCIE_CFG_RPPGEN 0xE2 +#define R_PCH_PCIE_CFG_PCIEPMECTL 0x420 Method (IRQM, 1, Serialized) { @@ -232,10 +236,237 @@ } } +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + PST0, 8 +} + Device (RP09) { Name (_ADR, 0x001D0000) + OperationRegion(PX11,SystemMemory,0x0xFE001000,0xCA0) + Field(PX11, AnyAcc, NoLock, Preserve) + { + Offset(0x93C), + SXII, 32, + Offset(0xC80), + SX20, 32, + Offset(0xC84), + SX21, 32, + Offset(0xC88), + SX22, 32, + Offset(0xC8C), + SX30, 32, + Offset(0xC90), + SX31, 32, + Offset(0xC94), + SX32, 32, + Offset(0xC98), + SX33, 32, + Offset(0xC9C), + SX34, 32, + } + OperationRegion(PXCS,SystemMemory,0xC00E8000,0xC80) + Field(PXCS,AnyAcc, NoLock, Preserve) + { + Offset(0), + VDID, 32, + Offset(0x50), // LCTL - Link Control Register + L0SE, 1, // 0, L0s Entry Enabled + Offset(0x52), // LSTS - Link Status Register + , 13, + LASX, 1, // 0, Link Active Status + Offset(0x5A), // SLSTS[7:0] - Slot Status Register + , 3, + PDCX, 1, // 3, Presence Detect Changed + , 2, + PDSX, 1, // 6, Presence Detect State + , 1, + Offset(0x60), // RSTS - Root Status Register + , 16, + PSPX, 1, // 16, PME Status + Offset(R_PCH_PCIE_CFG_MPC), // 0xD8, MPC - Miscellaneous Port Configuration Register + , 30, + HPEX, 1, // 30, Hot Plug SCI Enable + PMEX, 1, // 31, Power Management SCI Enable + Offset(R_PCH_PCIE_CFG_SPR), // 0xE0, SPR - Scratch Pad Register + , 7, + NCB7, 1, // Non-Sticky Scratch Pad Bit (NSCB)[7] + Offset(R_PCH_PCIE_CFG_RPPGEN), // 0xE2, RPPGEN - Root Port Power Gating Enable + , 2, + L23E, 1, // 2, L23_Rdy Entry Request (L23ER) + L23R, 1, // 3, L23_Rdy to Detect Transition (L23R2DT) + Offset(0xF4), // BLKPLLEN + , 10, + BPLL, 1, + Offset(0x338), // BLKDQDA + , 26, + BDQA, 1, + Offset(R_PCH_PCIE_CFG_PCIEPMECTL), // 0x420, PCIEPMECTL (PCIe PM Extension Control) + , 30, + DPGE, 1, // PCIEPMECTL[30]: Disabled, Detect and L23_Rdy State PHY Lane Power Gating Enable (DLSULPPGE): + } + + Method (CDLY, 1, Serialized) { + Store(0, Local0) + While(1) { + If(Lgreater(Local0, Arg0)) { + Break + } + Increment(Local0) + } + printf("test") + } + + /* L23D is called from _ON to get PCIe link back to Active State */ + Method (L23D, 0, Serialized) { + Store(0x21, PST0) + If(LNotEqual(NCB7,0x1)) { + Store(0x22, PST0) + Return() + } + //Store(0, DPGE) + Store(1, L23R) + Store(0, Local0) + /* Wait for transition to Detect */ + While(L23R) { + If(Lgreater(Local0, 20)) + { + Store(0x23, PST0) + Break + } + Sleep(16) + Increment(Local0) + } + Store(0,NCB7) + //Store(1, DPGE) + /* Once in Detect, wait up to 124 ms for Link Active (typically happens in under 70ms) */ + Store(0, Local0) + While(LEqual(LASX,0)) { + If(Lgreater(Local0, 20)) + { + Store(0x24, PST0) + Break + } + CDLY(10000*60) + Increment(Local0) + } + } + + /* DL23 method is called from _OFF to put PCIe link into L2/L3 State */ + Method (DL23, 0, Serialized) { + Store(0x11, PST0) + Store(1, L23E) + Sleep(16) + Store(0, Local0) + While(L23E) { + Store(0x12, PST0) + If(Lgreater(Local0, 4)) { + Store(0x13, PST0) + Break + } + Sleep(16) + Increment(Local0) + } + Store (1, NCB7) + } + + PowerResource (PR09, 0x00, 0x0000) + { + Method (_ON, 0, Serialized) /* Power On */ + { +#if 0 + /* _ON entry: Post codes: 0x90 */ + Store(0x90, PST0) + Store(0xBE, PST0) + Store(0xEF, PST0) + If(LEqual(SXII, 0)) { Store(0x00, PST0) } Else { Store(0x01, PST0) } + If(LEqual(SX20, 0)) { Store(0x00, PST0) } Else { Store(0x01, PST0) } + If(LEqual(SX21, 0)) { Store(0x00, PST0) } Else { Store(0x01, PST0) } + If(LEqual(SX22, 0)) { Store(0x00, PST0) } Else { Store(0x01, PST0) } + If(LEqual(SX30, 0)) { Store(0x00, PST0) } Else { Store(0x01, PST0) } + If(LEqual(SX31, 0)) { Store(0x00, PST0) } Else { Store(0x01, PST0) } + If(LEqual(SX32, 0)) { Store(0x00, PST0) } Else { Store(0x01, PST0) } + If(LEqual(SX33, 0)) { Store(0x00, PST0) } Else { Store(0x01, PST0) } + If(LEqual(SX34, 0)) { Store(0x00, PST0) } Else { Store(0x01, PST0) } + + /* Set Power Pin High */ + //STXS(GPP_B16) + STXS(GPP_B2) + + /* 10ms delay */ + Sleep(10) + + /* Unmask Source Clocks 0 & 3 */ + ShiftLeft(0x1, 0x0, Local0) // 0x1 left shift by clock number (0) + ShiftLeft(0x1, 0x0, Local1) // Clock Enable/Disable 1/0 -> left shift by clock number + ShiftLeft(0x1, 8, Local2) // Local 0 -> 0x1 left shifted by Root Port Index Starting from 0 + ShiftLeft(0x1, 8, Local3) // Local 1 -> 0x1 (Unmask) left shifted by Root Port Index Starting from 0 + IPCS(0xAC, 0, 16, Local0, Local1, Local2, Local3) + + /* De-assert reset pin */ + //STXS(GPP_H0) + STXS(GPP_A11) + + /* 100ms delay */ + CDLY(10000*50) + + /* Trigger L2/L3 ready exit flow in rootport - transition link to Detect */ + \_SB.PCI0.RP09.L23D() +#endif + } + Method (_OFF, 0, Serialized) /* Power Off */ + { +#if 0 + /* _OFF entry: Post Codes: 0x93 */ + Store(0x93, PST0) + + /* Trigger L2/L3 ready entry flow in rootport */ + \_SB.PCI0.RP09.DL23() + + /* Assert reset pin */ + //CTXS(GPP_H0) + CTXS(GPP_A11) + + /* Mask source clock 0 */ + ShiftLeft(0x1, 0x0, Local0) // 0x1 left shift by clock number (0) + ShiftLeft(0x0, 0x0, Local1) // Clock Enable/Disable 1/0 -> left shift by clock number + ShiftLeft(0x1, 8, Local2) // Local 0 -> 0x1 left shifted by Root Port Index Starting from 0 + ShiftLeft(0x0, 8, Local3) // Local 1 -> 0x0 (Mask) left shifted by Root Port Index Starting from 0 + IPCS(0xAC, 0, 16, Local0, Local1, Local2, Local3) + + /* Power off the power pin */ + //CTXS(GPP_B16) + CTXS(GPP_B2) +#endif + } + Method (_STA, 0, NotSerialized) /* _STA: Status */ + { +#if 0 + Store(0x88, PST0) + If(GTXS(GPP_A11)) { + Store(0x1, PST0) + Return (1) + } Else { + Store(0x0, PST0) + Return (0) + } +#endif + Return (0xFF) + } + } + + Name (_PR0, Package (0x01) /* _PR0: Power Resources for D0 */ + { + PR09 + }) + Name (_PR3, Package (0x01) /* _PR3: Power Resources for D3hot */ + { + PR09 + }) + OperationRegion (RPCS, PCI_Config, 0x4c, 4) Field (RPCS, AnyAcc, NoLock, Preserve) { @@ -247,6 +478,23 @@ { Return (IRQM (RPPN)) } + + Device (PXSX) + { + Name (_ADR, 0x00000000) + Name (_S0W, 4) + Method (_DSD, 0) { + Return ( + Package () { + ToUUID("5025030F-842F-4AB4-A561-99A5189762D0"), + // Enable D3 Support for NVMe Storage + Package () { + Package (2) {"StorageD3Enable",1} // 1 - Enable; 0 - Disable + } + } + ) + } + } } Device (RP10) @@ -269,7 +517,7 @@ Device (RP11) { Name (_ADR, 0x001D0002) - + OperationRegion (RPCS, PCI_Config, 0x4c, 4) Field (RPCS, AnyAcc, NoLock, Preserve) { diff --git a/src/soc/intel/tigerlake/acpi/pmc.asl b/src/soc/intel/tigerlake/acpi/pmc.asl new file mode 100644 index 0000000..f74e3f2 --- /dev/null +++ b/src/soc/intel/tigerlake/acpi/pmc.asl @@ -0,0 +1,1170 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include <soc/iomap.h> + +#define PCH_MAX_PCIE_ROOT_PORTS 24 +#define R_PMC_PWRM_IPC_CMD 0x00 ///< IPC command +#define N_PMC_PWRM_IPC_CMD_CMD_ID 12 ///< IPC command.cmd.ID +#define N_PMC_PWRM_IPC_CMD_SIZE 16 ///< IPC command.size + +#define V_TGL_PCH_LP_PMC_DID 0xA0A1 +#define R_PMC_PWRM_TIMED_GPIO_CONTROL_0 0x1210 +#define R_PMC_PWRM_TIMED_GPIO_CONTROL_1 0x1310 +#define R_PMC_CFG_BASE 0x10 +#define B_PMC_CFG_PWRM_BASE_MASK 0xFFFF0000 ///< PWRM must be 64KB alignment to align the source decode. + +// +// ACPI and legacy I/O register offsets from ACPIBASE +// +#define R_ACPI_IO_PM1_STS 0x00 +#define S_ACPI_IO_PM1_STS 2 +#define B_ACPI_IO_PM1_STS_WAK BIT15 +#define B_ACPI_IO_PM1_STS_PCIEXP_WAKE_STS BIT14 +#define B_ACPI_IO_PM1_STS_PRBTNOR BIT11 +#define B_ACPI_IO_PM1_STS_RTC BIT10 +#define B_ACPI_IO_PM1_STS_PWRBTN BIT8 +#define B_ACPI_IO_PM1_STS_GBL BIT5 +#define B_ACPI_IO_PM1_STS_BM BIT4 +#define B_ACPI_IO_PM1_STS_TMROF BIT0 +#define N_ACPI_IO_PM1_STS_WAK 15 +#define N_ACPI_IO_PM1_STS_PCIEXP_WAKE_STS 14 +#define N_ACPI_IO_PM1_STS_PRBTNOR 11 +#define N_ACPI_IO_PM1_STS_RTC 10 +#define N_ACPI_IO_PM1_STS_PWRBTN 8 +#define N_ACPI_IO_PM1_STS_GBL 5 +#define N_ACPI_IO_PM1_STS_BM 4 +#define N_ACPI_IO_PM1_STS_TMROF 0 + +#define R_ACPI_IO_PM1_EN 0x02 +#define S_ACPI_IO_PM1_EN 2 +#define B_ACPI_IO_PM1_EN_RTC BIT10 +#define B_ACPI_IO_PM1_EN_PWRBTN BIT8 +#define B_ACPI_IO_PM1_EN_GBL BIT5 +#define B_ACPI_IO_PM1_EN_TMROF BIT0 +#define N_ACPI_IO_PM1_EN_RTC 10 +#define N_ACPI_IO_PM1_EN_PWRBTN 8 +#define N_ACPI_IO_PM1_EN_GBL 5 +#define N_ACPI_IO_PM1_EN_TMROF 0 + +#define R_ACPI_IO_PM1_CNT 0x04 +#define S_ACPI_IO_PM1_CNT 4 +#define B_ACPI_IO_PM1_CNT_SLP_EN BIT13 +#define B_ACPI_IO_PM1_CNT_SLP_TYP (BIT12 | BIT11 | BIT10) +#define V_ACPI_IO_PM1_CNT_S0 0 +#define V_ACPI_IO_PM1_CNT_S1 BIT10 +#define V_ACPI_IO_PM1_CNT_S3 (BIT12 | BIT10) +#define V_ACPI_IO_PM1_CNT_S4 (BIT12 | BIT11) +#define V_ACPI_IO_PM1_CNT_S5 (BIT12 | BIT11 | BIT10) +#define B_ACPI_IO_PM1_CNT_GBL_RLS BIT2 +#define B_ACPI_IO_PM1_CNT_BM_RLD BIT1 +#define B_ACPI_IO_PM1_CNT_SCI_EN BIT0 + +#define R_ACPI_IO_PM1_TMR 0x08 +#define V_ACPI_IO_PM1_TMR_FREQUENCY 3579545 +#define B_ACPI_IO_PM1_TMR_VAL 0xFFFFFF +#define V_ACPI_IO_PM1_TMR_MAX_VAL 0x1000000 ///< The timer is 24 bit overflow + +#define R_ACPI_IO_SMI_EN 0x30 +#define S_ACPI_IO_SMI_EN 4 +#define B_ACPI_IO_SMI_EN_LEGACY_USB3 BIT31 +#define B_ACPI_IO_SMI_EN_GPIO_UNLOCK_SMI BIT27 +#define B_ACPI_IO_SMI_EN_LEGACY_USB2 BIT17 +#define B_ACPI_IO_SMI_EN_PERIODIC BIT14 +#define B_ACPI_IO_SMI_EN_TCO BIT13 +#define B_ACPI_IO_SMI_EN_MCSMI BIT11 +#define B_ACPI_IO_SMI_EN_BIOS_RLS BIT7 +#define B_ACPI_IO_SMI_EN_SWSMI_TMR BIT6 +#define B_ACPI_IO_SMI_EN_APMC BIT5 +#define B_ACPI_IO_SMI_EN_ON_SLP_EN BIT4 +#define B_ACPI_IO_SMI_EN_LEGACY_USB BIT3 +#define B_ACPI_IO_SMI_EN_BIOS BIT2 +#define B_ACPI_IO_SMI_EN_EOS BIT1 +#define B_ACPI_IO_SMI_EN_GBL_SMI BIT0 +#define N_ACPI_IO_SMI_EN_LEGACY_USB3 31 +#define N_ACPI_IO_SMI_EN_ESPI 28 +#define N_ACPI_IO_SMI_EN_GPIO_UNLOCK 27 +#define N_ACPI_IO_SMI_EN_INTEL_USB2 18 +#define N_ACPI_IO_SMI_EN_LEGACY_USB2 17 +#define N_ACPI_IO_SMI_EN_PERIODIC 14 +#define N_ACPI_IO_SMI_EN_TCO 13 +#define N_ACPI_IO_SMI_EN_MCSMI 11 +#define N_ACPI_IO_SMI_EN_BIOS_RLS 7 +#define N_ACPI_IO_SMI_EN_SWSMI_TMR 6 +#define N_ACPI_IO_SMI_EN_APMC 5 +#define N_ACPI_IO_SMI_EN_ON_SLP_EN 4 +#define N_ACPI_IO_SMI_EN_LEGACY_USB 3 +#define N_ACPI_IO_SMI_EN_BIOS 2 +#define N_ACPI_IO_SMI_EN_EOS 1 +#define N_ACPI_IO_SMI_EN_GBL_SMI 0 + +#define R_ACPI_IO_SMI_STS 0x34 +#define S_ACPI_IO_SMI_STS 4 +#define B_ACPI_IO_SMI_STS_LEGACY_USB3 BIT31 +#define B_ACPI_IO_SMI_STS_GPIO_UNLOCK BIT27 +#define B_ACPI_IO_SMI_STS_SPI BIT26 +#define B_ACPI_IO_SMI_STS_MONITOR BIT21 +#define B_ACPI_IO_SMI_STS_PCI_EXP BIT20 +#define B_ACPI_IO_SMI_STS_PATCH BIT19 +#define B_ACPI_IO_SMI_STS_INTEL_USB2 BIT18 +#define B_ACPI_IO_SMI_STS_LEGACY_USB2 BIT17 +#define B_ACPI_IO_SMI_STS_SMBUS BIT16 +#define B_ACPI_IO_SMI_STS_SERIRQ BIT15 +#define B_ACPI_IO_SMI_STS_PERIODIC BIT14 +#define B_ACPI_IO_SMI_STS_TCO BIT13 +#define B_ACPI_IO_SMI_STS_DEVMON BIT12 +#define B_ACPI_IO_SMI_STS_MCSMI BIT11 +#define B_ACPI_IO_SMI_STS_GPIO_SMI BIT10 +#define B_ACPI_IO_SMI_STS_GPE0 BIT9 +#define B_ACPI_IO_SMI_STS_PM1_STS_REG BIT8 +#define B_ACPI_IO_SMI_STS_SWSMI_TMR BIT6 +#define B_ACPI_IO_SMI_STS_APM BIT5 +#define B_ACPI_IO_SMI_STS_ON_SLP_EN BIT4 +#define B_ACPI_IO_SMI_STS_LEGACY_USB BIT3 +#define B_ACPI_IO_SMI_STS_BIOS BIT2 +#define N_ACPI_IO_SMI_STS_LEGACY_USB3 31 +#define N_ACPI_IO_SMI_STS_ESPI 28 +#define N_ACPI_IO_SMI_STS_GPIO_UNLOCK 27 +#define N_ACPI_IO_SMI_STS_SPI 26 +#define N_ACPI_IO_SMI_STS_MONITOR 21 +#define N_ACPI_IO_SMI_STS_PCI_EXP 20 +#define N_ACPI_IO_SMI_STS_PATCH 19 +#define N_ACPI_IO_SMI_STS_INTEL_USB2 18 +#define N_ACPI_IO_SMI_STS_LEGACY_USB2 17 +#define N_ACPI_IO_SMI_STS_SMBUS 16 +#define N_ACPI_IO_SMI_STS_SERIRQ 15 +#define N_ACPI_IO_SMI_STS_PERIODIC 14 +#define N_ACPI_IO_SMI_STS_TCO 13 +#define N_ACPI_IO_SMI_STS_DEVMON 12 +#define N_ACPI_IO_SMI_STS_MCSMI 11 +#define N_ACPI_IO_SMI_STS_GPIO_SMI 10 +#define N_ACPI_IO_SMI_STS_GPE0 9 +#define N_ACPI_IO_SMI_STS_PM1_STS_REG 8 +#define N_ACPI_IO_SMI_STS_SWSMI_TMR 6 +#define N_ACPI_IO_SMI_STS_APM 5 +#define N_ACPI_IO_SMI_STS_ON_SLP_EN 4 +#define N_ACPI_IO_SMI_STS_LEGACY_USB 3 +#define N_ACPI_IO_SMI_STS_BIOS 2 + +#define R_ACPI_IO_GPE_CNTL 0x40 +#define B_ACPI_IO_GPE_CNTL_SWGPE_CTRL BIT17 + +#define R_ACPI_IO_DEVACT_STS 0x44 +#define S_ACPI_IO_DEVACT_STS 2 +#define B_ACPI_IO_DEVACT_STS_MASK 0x13E1 +#define B_ACPI_IO_DEVACT_STS_KBC BIT12 +#define B_ACPI_IO_DEVACT_STS_PIRQDH BIT9 +#define B_ACPI_IO_DEVACT_STS_PIRQCG BIT8 +#define B_ACPI_IO_DEVACT_STS_PIRQBF BIT7 +#define B_ACPI_IO_DEVACT_STS_PIRQAE BIT6 +#define B_ACPI_IO_DEVACT_STS_D0_TRP BIT0 +#define N_ACPI_IO_DEVACT_STS_KBC 12 +#define N_ACPI_IO_DEVACT_STS_PIRQDH 9 +#define N_ACPI_IO_DEVACT_STS_PIRQCG 8 +#define N_ACPI_IO_DEVACT_STS_PIRQBF 7 +#define N_ACPI_IO_DEVACT_STS_PIRQAE 6 + +#define R_ACPI_IO_PM2_CNT 0x50 +#define B_ACPI_IO_PM2_CNT_ARB_DIS BIT0 + +#define R_ACPI_IO_OC_WDT_CTL 0x54 +#define B_ACPI_IO_OC_WDT_CTL_RLD BIT31 +#define B_ACPI_IO_OC_WDT_CTL_ICCSURV_STS BIT25 +#define B_ACPI_IO_OC_WDT_CTL_NO_ICCSURV_STS BIT24 +#define B_ACPI_IO_OC_WDT_CTL_FORCE_ALL BIT15 +#define B_ACPI_IO_OC_WDT_CTL_EN BIT14 +#define B_ACPI_IO_OC_WDT_CTL_ICCSURV BIT13 +#define B_ACPI_IO_OC_WDT_CTL_LCK BIT12 +#define B_ACPI_IO_OC_WDT_CTL_TOV_MASK 0x3FF +#define B_ACPI_IO_OC_WDT_CTL_FAILURE_STS BIT23 +#define B_ACPI_IO_OC_WDT_CTL_UNXP_RESET_STS BIT22 +#define B_ACPI_IO_OC_WDT_CTL_AFTER_POST 0x3F0000 +#define V_ACPI_IO_OC_WDT_CTL_STATUS_FAILURE 1 +#define V_ACPI_IO_OC_WDT_CTL_STATUS_OK 0 + +#define R_ACPI_IO_GPE0_STS_31_0 0x60 +#define R_ACPI_IO_GPE0_STS_63_32 0x64 +#define R_ACPI_IO_GPE0_STS_95_64 0x68 +#define R_ACPI_IO_GPE0_STS_127_96 0x6C +#define S_ACPI_IO_GPE0_STS_127_96 4 +#define B_ACPI_IO_GPE0_STS_127_96_CPU_WAKE_EN BIT19 +#define B_ACPI_IO_GPE0_STS_127_96_WADT BIT18 +#define B_ACPI_IO_GPE0_STS_127_96_USB_CON_DSX_STS BIT17 +#define B_ACPI_IO_GPE0_STS_127_96_LAN_WAKE BIT16 +#define B_ACPI_IO_GPE0_STS_127_96_GPIO_TIER_2 BIT15 +#define B_ACPI_IO_GPE0_STS_127_96_PME_B0 BIT13 +#define B_ACPI_IO_GPE0_STS_127_96_ME_SCI BIT12 +#define B_ACPI_IO_GPE0_STS_127_96_PME BIT11 +#define B_ACPI_IO_GPE0_STS_127_96_BATLOW BIT10 +#define B_ACPI_IO_GPE0_STS_127_96_PCI_EXP BIT9 +#define B_ACPI_IO_GPE0_STS_127_96_RI BIT8 +#define B_ACPI_IO_GPE0_STS_127_96_SMB_WAK BIT7 +#define B_ACPI_IO_GPE0_STS_127_96_TC0SCI BIT6 +#define B_ACPI_IO_GPE0_STS_127_96_SWGPE BIT2 +#define B_ACPI_IO_GPE0_STS_127_96_HOT_PLUG BIT1 +#define N_ACPI_IO_GPE0_STS_127_96_GPIO_TIER_2 15 +#define N_ACPI_IO_GPE0_STS_127_96_PME_B0 13 +#define N_ACPI_IO_GPE0_STS_127_96_PME 11 +#define N_ACPI_IO_GPE0_STS_127_96_BATLOW 10 +#define N_ACPI_IO_GPE0_STS_127_96_PCI_EXP 9 +#define N_ACPI_IO_GPE0_STS_127_96_RI 8 +#define N_ACPI_IO_GPE0_STS_127_96_SMB_WAK 7 +#define N_ACPI_IO_GPE0_STS_127_96_TC0SCI 6 +#define N_ACPI_IO_GPE0_STS_127_96_SWGPE 2 +#define N_ACPI_IO_GPE0_STS_127_96_HOT_PLUG 1 + +#define R_ACPI_IO_GPE0_EN_31_0 0x70 +#define R_ACPI_IO_GPE0_EN_63_32 0x74 +#define R_ACPI_IO_GPE0_EN_95_64 0x78 +#define R_ACPI_IO_GPE0_EN_127_96 0x7C +#define S_ACPI_IO_GPE0_EN_127_96 4 +#define B_ACPI_IO_GPE0_EN_127_96_CPU_WAKE_EN BIT19 +#define B_ACPI_IO_GPE0_EN_127_96_WADT BIT18 +#define B_ACPI_IO_GPE0_EN_127_96_USB_CON_DSX_EN BIT17 +#define B_ACPI_IO_GPE0_EN_127_96_LAN_WAKE BIT16 +#define B_ACPI_IO_GPE0_EN_127_96_PME_B0 BIT13 +#define B_ACPI_IO_GPE0_EN_127_96_ME_SCI BIT12 +#define B_ACPI_IO_GPE0_EN_127_96_PME BIT11 +#define B_ACPI_IO_GPE0_EN_127_96_BATLOW BIT10 +#define B_ACPI_IO_GPE0_EN_127_96_PCI_EXP BIT9 +#define B_ACPI_IO_GPE0_EN_127_96_RI BIT8 +#define B_ACPI_IO_GPE0_EN_127_96_TC0SCI BIT6 +#define B_ACPI_IO_GPE0_EN_127_96_SWGPE BIT2 +#define B_ACPI_IO_GPE0_EN_127_96_HOT_PLUG BIT1 +#define N_ACPI_IO_GPE0_EN_127_96_PME_B0 13 +#define N_ACPI_IO_GPE0_EN_127_96_USB3 12 +#define N_ACPI_IO_GPE0_EN_127_96_PME 11 +#define N_ACPI_IO_GPE0_EN_127_96_BATLOW 10 +#define N_ACPI_IO_GPE0_EN_127_96_PCI_EXP 9 +#define N_ACPI_IO_GPE0_EN_127_96_RI 8 +#define N_ACPI_IO_GPE0_EN_127_96_TC0SCI 6 +#define N_ACPI_IO_GPE0_EN_127_96_SWGPE 2 +#define N_ACPI_IO_GPE0_EN_127_96_HOT_PLUG 1 + + +// +// TCO register I/O map +// +#define R_TCO_IO_RLD 0x0 +#define R_TCO_IO_DAT_IN 0x2 +#define R_TCO_IO_DAT_OUT 0x3 +#define R_TCO_IO_TCO1_STS 0x04 +#define S_TCO_IO_TCO1_STS 2 +#define B_TCO_IO_TCO1_STS_DMISERR BIT12 +#define B_TCO_IO_TCO1_STS_DMISMI BIT10 +#define B_TCO_IO_TCO1_STS_DMISCI BIT9 +#define B_TCO_IO_TCO1_STS_BIOSWR BIT8 +#define B_TCO_IO_TCO1_STS_NEWCENTURY BIT7 +#define B_TCO_IO_TCO1_STS_TIMEOUT BIT3 +#define B_TCO_IO_TCO1_STS_TCO_INT BIT2 +#define B_TCO_IO_TCO1_STS_SW_TCO_SMI BIT1 +#define B_TCO_IO_TCO1_STS_NMI2SMI BIT0 +#define N_TCO_IO_TCO1_STS_DMISMI 10 +#define N_TCO_IO_TCO1_STS_BIOSWR 8 +#define N_TCO_IO_TCO1_STS_NEWCENTURY 7 +#define N_TCO_IO_TCO1_STS_TIMEOUT 3 +#define N_TCO_IO_TCO1_STS_SW_TCO_SMI 1 +#define N_TCO_IO_TCO1_STS_NMI2SMI 0 + +#define R_TCO_IO_TCO2_STS 0x06 +#define S_TCO_IO_TCO2_STS 2 +#define B_TCO_IO_TCO2_STS_SMLINK_SLV_SMI BIT4 +#define B_TCO_IO_TCO2_STS_BAD_BIOS BIT3 +#define B_TCO_IO_TCO2_STS_BOOT BIT2 +#define B_TCO_IO_TCO2_STS_SECOND_TO BIT1 +#define B_TCO_IO_TCO2_STS_INTRD_DET BIT0 +#define N_TCO_IO_TCO2_STS_INTRD_DET 0 + +#define R_TCO_IO_TCO1_CNT 0x08 +#define S_TCO_IO_TCO1_CNT 2 +#define B_TCO_IO_TCO1_CNT_LOCK BIT12 +#define B_TCO_IO_TCO1_CNT_TMR_HLT BIT11 +#define B_TCO_IO_TCO1_CNT_NMI2SMI_EN BIT9 +#define B_TCO_IO_TCO1_CNT_NMI_NOW BIT8 +#define N_TCO_IO_TCO1_CNT_NMI2SMI_EN 9 +#define B_TCO_IO_TCO1_CNT_NR_MSUS BIT0 //NO_REBOOT + +#define R_TCO_IO_TCO2_CNT 0x0A +#define S_TCO_IO_TCO2_CNT 2 +#define B_TCO_IO_TCO2_CNT_OS_POLICY 0x0030 +#define B_TCO_IO_TCO2_CNT_GPI11_ALERT_DISABLE 0x0008 +#define B_TCO_IO_TCO2_CNT_INTRD_SEL 0x0006 +#define N_TCO_IO_TCO2_CNT_INTRD_SEL 2 + +#define R_TCO_IO_MESSAGE1 0x0C +#define R_TCO_IO_MESSAGE2 0x0D +#define R_TCO_IO_TWDS 0x0E ///< TCO_WDSTATUS register. +#define R_TCO_IO_LE 0x10 ///< LEGACY_ELIM register +#define B_TCO_IO_LE_IRQ12_CAUSE BIT1 +#define B_TCO_IO_LE_IRQ1_CAUSE BIT0 +#define R_TCO_IO_TMR 0x12 + +// +// PWRM Registers for IPC interface +// +#define R_PMC_PWRM_IPC_CMD 0x00 ///< IPC command +#define N_PMC_PWRM_IPC_CMD_CMD_ID 12 ///< IPC command.cmd.ID +#define N_PMC_PWRM_IPC_CMD_SIZE 16 ///< IPC command.size +#define B_PMC_PWRM_IPC_CMD_SIZE_MASK 0x00FF0000 ///< IPC command.size mask Bits[23:16] +#define B_PMC_PWRM_IPC_CMD_MSI BIT8 ///< IPC command MSI bit +#define N_PMC_PWRM_IPC_CMD_COMMAND 0 ///< IPC command.cmd.Command +#define B_PMC_PWRM_IPC_CMD_COMMAND_MASK 0x000000FF ///< IPC command.size mask Bits[07:00] +#define V_PMC_PWRM_IPC_CMD_COMMAND_GEN_COMM 0xA0 ///< IPC command for General PMC Communication +#define V_PMC_PWRM_IPC_SUBCMD_GEN_COMM_READ 2 ///< IPC subcommand to Read PMC address space using WBUF0 +#define V_PMC_PWRM_IPC_CMD_COMMAND_SLP_CTRL 0xA1 ///< IPC command to control S0ix policies +#define V_PMC_PWRM_IPC_CMD_COMMAND_SNDW_RCOMP 0xA2 ///< IPC command to control platform Soundwire buffer RCOMP +#define V_PMC_PWRM_IPC_CMD_COMMAND_FIVR 0xA3 ///< IPC command to control FIVR Configuration +#define V_PMC_PWRM_IPC_SUBCMD_RFI_CTRL0_LOGIC 0 ///< IPC subcommand to control RFI Control 0 register logic write +#define V_PMC_PWRM_IPC_SUBCMD_RFI_CTRL4_LOGIC 1 ///< IPC subcommand to control RFI Control 4 register logic write +#define V_PMC_PWRM_IPC_SUBCMD_EMI_CTRL0_LOGIC 2 ///< IPC subcommand to control EMI Control 0 register logic write +#define V_PMC_PWRM_IPC_SUBCMD_FFFC_FAULT_STATUS 3 ///< IPC subcommand to control FFFC_FAULT_STATUS register logic read +#define V_PMC_PWRM_IPC_SUBCMD_FFFC_RFI_STATUS 4 ///< IPC subcommand to control FFFC_RFI_STATUS register logic read +#define V_PMC_PWRM_IPC_CMD_CMD_ID_FIVR_READ 0x00 ///< IPC subcommand to read FIVR Register +#define V_PMC_PWRM_IPC_CMD_CMD_ID_FIVR_WRITE 0x01 ///< IPC subcommand to write FIVR Register and fuse SRAM/DCCM +#define V_PMC_PWRM_IPC_CMD_COMMAND_NPK_STATE 0xA4 ///< IPC command to control NPK Power State +#define V_PMC_PWRM_IPC_CMD_COMMAND_CRASHLOG 0xA6 ///< CrashLog Command +#define V_PMC_PWRM_IPC_CMD_COMMAND_ME_DISABLE 0xA9 ///< IPC command to disable ME devices +#define V_PMC_PWRM_IPC_CMD_COMMAND_PMC_PRV_REG_ACCESS 0xAB ///< IPC command from proxy access to PMC private registers +#define V_PMC_PRIVATE_REGISTER_ID_GBLRST_TRIG_MASK0 0x0 +#define V_PMC_PRIVATE_REGISTER_ID_GBLRST_EVENT_MASK0 0x1 +#define V_PMC_PRIVATE_REGISTER_ID_MAX 0x2 +#define V_PMC_PWRM_IPC_CMD_COMMAND_SSC_STATE 0xAE ///< IPC command to control SA SSC enable/disable +#define V_PMC_PWRM_IPC_CMD_CMD_ID_CRASHLOG_DISCOVERY 0x01 ///< CrashLog Discovery SubCommand +#define V_PMC_PWRM_IPC_CMD_CMD_ID_CRASHLOG_DISABLE 0x02 ///< Disable CrashLog SubCommand +#define V_PMC_PWRM_IPC_CMD_CMD_ID_CRASHLOG_UPDATE 0x03 ///< Manual Trigger CrashLog SubCommand +#define V_PMC_PWRM_IPC_CMD_CMD_ID_CRASHLOG_ERASE 0x04 ///< Clear CrashLog record SubCommand +#define V_PMC_PWRM_IPC_CMD_CMD_ID_CRASHLOG_ON_RESET 0x05 ///< Collect on all resets SubCommand +#define V_PMC_PWRM_IPC_CMD_CMD_ID_CRASHLOG_RE_ARM 0x06 ///< Re-arm SubCommand to ensure that a trigger command only executed on time per boot +#define V_PMC_PWRM_IPC_SRC_CLK_CMD 0xA8 ///< IPC to PMC SRCCLK command +#define V_PMC_PWRM_IPC_CMD_COMMAND_PROXY 0xAA ///< Proxy access to SOC registers +#define V_PMC_PWRM_IPC_SRC_CLK_PORT_MAPPING_CMD 0xAC ///< IPC to PMC SRCCLK and port mapping command +#define V_PMC_PWRM_IPC_GCR_REG_LOCK_CMD 0xAD ///< IPC command to lock PMC GCR registers +#define V_PMC_PWRM_IPC_CMD_CMD_ID_PROXY_READ 0 ///< Read command +#define V_PMC_PWRM_IPC_CMD_CMD_ID_PROXY_WRITE 1 ///< Write command +#define V_PMC_PWRM_IPC_CMD_WBUF0_PROXY_NMI 2 ///< parameter to access NMI control register +#define R_PMC_PWRM_IPC_STS 0x04 ///< IPC Status +#define B_PMC_PWRM_IPC_STS_BUSY BIT0 ///< IPC Status Busy Bit +#define B_PMC_PWRM_IPC_STS_ERROR BIT1 ///< IPC Status Error Bit +#define N_PMC_PWRM_IPC_STS_ERR_CODE BIT16 ///< IPC Status Error status +#define B_PMC_PWRM_IPC_STS_ERR_CODE_MASK 0x00FF0000 ///< IPC Status Error status mask[23:16] +#define R_PMC_PWRM_IPC_SPTR 0x08 ///< IPC Source Pointer +#define R_PMC_PWRM_IPC_DPTR 0x0C ///< IPC Destination Pointer +#define R_PMC_PWRM_IPC_WBUF0 0x80 ///< IPC Write Buffer +#define R_PMC_PWRM_IPC_WBUF1 0x84 ///< IPC Write Buffer +#define R_PMC_PWRM_IPC_WBUF2 0x88 ///< IPC Write Buffer +#define R_PMC_PWRM_IPC_WBUF3 0x8C ///< IPC Write Buffer +#define R_PMC_PWRM_IPC_RBUF0 0x90 ///< IPC Read Buffer +#define R_PMC_PWRM_IPC_RBUF1 0x94 ///< IPC Read Buffer +#define R_PMC_PWRM_IPC_RBUF2 0x98 ///< IPC Read Buffer +#define R_PMC_PWRM_IPC_RBUF3 0x9C ///< IPC Read Buffer + + +// +// PWRM Registers +// +#define R_PMC_PWRM_GEN_PMCON_A 0x1020 ///< in CNL located in PWRM +#define B_PMC_PWRM_GEN_PMCON_A_DC_PP_DIS BIT30 +#define B_PMC_PWRM_GEN_PMCON_A_DSX_PP_DIS BIT29 +#define B_PMC_PWRM_GEN_PMCON_A_AG3_PP_EN BIT28 +#define B_PMC_PWRM_GEN_PMCON_A_SX_PP_EN BIT27 +#define B_PMC_PWRM_GEN_PMCON_A_ALLOW_ICLK_PLL BIT26 +#define B_PMC_PWRM_GEN_PMCON_A_MPHY_CRICLK_GATE_OVR BIT25 +#define B_PMC_PWRM_GEN_PMCON_A_GBL_RST_STS BIT24 +#define B_PMC_PWRM_GEN_PMCON_A_DISB BIT23 +#define B_PMC_PWRM_GEN_PMCON_A_ALLOW_OPI_PLL_SD_INC0 BIT22 +#define B_PMC_PWRM_GEN_PMCON_A_MEM_SR BIT21 +#define B_PMC_PWRM_GEN_PMCON_A_ALLOW_SPXB_CG_INC0 BIT20 +#define B_PMC_PWRM_GEN_PMCON_A_ALLOW_L1LOW_C0 BIT19 +#define B_PMC_PWRM_GEN_PMCON_A_MS4V BIT18 +#define B_PMC_PWRM_GEN_PMCON_A_ALLOW_L1LOW_OPI_ON BIT17 +#define B_PMC_PWRM_GEN_PMCON_A_SUS_PWR_FLR BIT16 +#define B_PMC_PWRM_GEN_PMCON_A_PME_B0_S5_DIS BIT15 +#define B_PMC_PWRM_GEN_PMCON_A_PWR_FLR BIT14 +#define B_PMC_PWRM_GEN_PMCON_A_ALLOW_L1LOW_BCLKREQ_ON BIT13 +#define B_PMC_PWRM_GEN_PMCON_A_DISABLE_SX_STRETCH BIT12 +#define B_PMC_PWRM_GEN_PMCON_A_HOST_RST_STS BIT9 +#define B_PMC_PWRM_GEN_PMCON_A_ESPI_SMI_LOCK BIT8 +#define B_PMC_PWRM_GEN_PMCON_A_SLP_S4_ASE BIT3 +#define B_PMC_PWRM_GEN_PMCON_A_AFTERG3_EN BIT0 +#define B_PMC_PWRM_GEN_PMCON_A_SLP_S3_MAW 0xC00 +#define V_PMC_PWRM_GEN_PMCON_A_SLP_S3_MAW_60US 0x000 +#define V_PMC_PWRM_GEN_PMCON_A_SLP_S3_MAW_1MS 0x400 +#define V_PMC_PWRM_GEN_PMCON_A_SLP_S3_MAW_50MS 0x800 +#define V_PMC_PWRM_GEN_PMCON_A_SLP_S3_MAW_2S 0xC00 +#define B_PMC_PWRM_GEN_PMCON_A_SWSMI_RTSL 0xC0 +#define V_PMC_PWRM_GEN_PMCON_A_SWSMI_RTSL_64MS 0xC0 +#define V_PMC_PWRM_GEN_PMCON_A_SWSMI_RTSL_32MS 0x80 +#define V_PMC_PWRM_GEN_PMCON_A_SWSMI_RTSL_16MS 0x40 +#define V_PMC_PWRM_GEN_PMCON_A_SWSMI_RTSL_1_5MS 0x00 +#define B_PMC_PWRM_GEN_PMCON_A_SLP_S4_MAW 0x30 +#define V_PMC_PWRM_GEN_PMCON_A_SLP_S4_MAW_1S 0x30 +#define V_PMC_PWRM_GEN_PMCON_A_SLP_S4_MAW_2S 0x20 +#define V_PMC_PWRM_GEN_PMCON_A_SLP_S4_MAW_3S 0x10 +#define V_PMC_PWRM_GEN_PMCON_A_SLP_S4_MAW_4S 0x00 +#define B_PMC_PWRM_GEN_PMCON_A_PER_SMI_SEL 0x6 +#define V_PMC_PWRM_GEN_PMCON_A_PER_SMI_64S 0x0000 +#define V_PMC_PWRM_GEN_PMCON_A_PER_SMI_32S 0x0002 +#define V_PMC_PWRM_GEN_PMCON_A_PER_SMI_16S 0x0004 +#define V_PMC_PWRM_GEN_PMCON_A_PER_SMI_8S 0x0006 + +#define R_PMC_PWRM_GEN_PMCON_B 0x1024 +#define B_PMC_PWRM_GEN_PMCON_B_SLPSX_STR_POL_LOCK BIT18 ///< Lock down SLP_S3/SLP_S4 Minimum Assertion width +#define B_PMC_PWRM_GEN_PMCON_B_FIVR_LOCK BIT17 +#define B_PMC_PWRM_GEN_PMCON_B_WOL_EN_OVRD BIT13 +#define B_PMC_PWRM_GEN_PMCON_B_BIOS_PCI_EXP_EN BIT10 +#define B_PMC_PWRM_GEN_PMCON_B_PWRBTN_LVL BIT9 +#define B_PMC_PWRM_GEN_PMCON_B_SMI_LOCK BIT4 +#define B_PMC_PWRM_GEN_PMCON_B_RTC_PWR_STS BIT2 + +#define R_PMC_PWRM_CRID 0x1030 ///< Configured Revision ID +#define B_PMC_PWRM_CRID_RID_SEL (BIT0 | BIT1) ///< RID Select +#define V_PMC_PWRM_CRID_RID_SEL_REVISIONID 0 +#define V_PMC_PWRM_CRID_RID_SEL_CRID0 1 +#define V_PMC_PWRM_CRID_RID_SEL_CRID1 2 +#define B_PMC_PWRM_CRID_CRID_LK BIT31 ///< CRID Lock + +#define R_PMC_PWRM_ETR3 0x1048 ///< in CNL this is PWRM register +#define B_PMC_PWRM_ETR3_CF9LOCK BIT31 ///< CF9h Lockdown +#define B_PMC_PWRM_ETR3_LATCH_EVENTS_C10_EXIT BIT30 +#define B_PMC_PWRM_ETR3_USB_CACHE_DIS BIT21 +#define B_PMC_PWRM_ETR3_CF9GR BIT20 ///< CF9h Global Reset +#define B_PMC_PWRM_ETR3_SKIP_HOST_RST_HS BIT19 +#define B_PMC_PWRM_ETR3_CWORWRE BIT18 +#define B_PMC_PWRM_THROT_1_VR_ALERT BIT0 + +#define R_PMC_PWRM_SSML 0x104C ///< Set Strap Msg Lock +#define B_PMC_PWRM_SSML_SSL BIT0 ///< Set_Strap Lock +#define R_PMC_PWRM_SSMC 0x1050 ///< Set Strap Msg Control +#define B_PMC_PWRM_SSMC_SSMS BIT0 ///< Set_Strap Mux Select +#define R_PMC_PWRM_SSMD 0x1054 ///< Set Strap Msg Data + +#define R_PMC_PWRM_CRID_UIP 0x10B0 ///< CRID update in progress +#define B_PMC_PWRM_CRID_UIP_CRIP_UIP BIT0 ///< CRID update in progress + +#define R_PMC_PWRM_MODPHY_PM_CFG1 0x10C0 +#define R_PMC_PWRM_MODPHY_PM_CFG2 0x10C4 +#define B_PMC_PWRM_MODPHY_PM_CFG2_MLSPDDGE BIT30 ///< ModPHY Lane SUS Power Domain Dynamic Gating Enable +#define B_PMC_PWRM_MODPHY_PM_CFG2_EMFC BIT29 ///< Enable ModPHY FET Control +#define B_PMC_PWRM_MODPHY_PM_CFG2_EFRT (BIT28 | BIT27 | BIT26 | BIT25 | BIT24) ///< External FET Ramp Time +#define N_PMC_PWRM_MODPHY_PM_CFG2_EFRT 24 +#define V_PMC_PWRM_MODPHY_PM_CFG2_EFRT_200US 0x0A +#define B_PMC_PWRM_MODPHY_PM_CFG2_ASLOR_UFS BIT16 ///< UFS ModPHY SPD SPD Override + +#define R_PMC_PWRM_MODPHY_PM_CFG3 0x10C8 ///< modPHY Power Management Configuration Reg 2 +#define B_PMC_PWRM_MODPHY_PM_CFG3_MLSPDDGE BIT30 ///< ModPHY Lane SUS Power Domain Dynamic Gating Enable +#define B_PMC_PWRM_MODPHY_PM_CFG3_EMFC BIT29 ///< Enable ModPHY FET Control +#define B_PMC_PWRM_MODPHY_PM_CFG3_EFRT (BIT28 | BIT27 | BIT26 | BIT25 | BIT24) ///< External FET Ramp Time +#define N_PMC_PWRM_MODPHY_PM_CFG3_EFRT 24 +#define V_PMC_PWRM_MODPHY_PM_CFG3_EFRT_200US 0x0A +#define B_PMC_PWRM_MODPHY_PM_CFG3_MSPDRTREQ_UFS BIT16 ///< UFS ModPHY SPD RT Request +#define B_PMC_PWRM_MODPHY_PM_CFG3_MSPDRTREQ_XDCI BIT15 ///< xDCI ModPHY SPD RT Request +#define B_PMC_PWRM_MODPHY_PM_CFG3_MSPDRTREQ_XHCI BIT14 ///< xHCI ModPHY SPD RT Request +#define B_PMC_PWRM_MODPHY_PM_CFG3_MSPDRTREQ_GBE BIT13 ///< GbE ModPHY SPD RT Request +#define B_PMC_PWRM_MODPHY_PM_CFG3_MSPDRTREQ_SATA BIT12 ///< SATA ModPHY SPD RT Request +#define B_PMC_PWRM_MODPHY_PM_CFG3_MPLSPDDGE BIT1 ///< ModPHY Per-Lane SUS Well Dynamic Gating +#define B_PMC_PWRM_MODPHY_PM_CFG3_C10_QUAL_MPHYPG BIT0 ///< C10 qualification for MPHY power gating + +#define R_PMC_PWRM_MODPHY_PM_CFG4 0x10CC +#define B_PMC_PWRM_MODPHY_PM_CFG4_ASLOR_UFS BIT16 ///< UFS ModPHY SPD SPD Override +#define R_PMC_PWRM_MODPHY_PM_CFG5 0x10D0 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_UFS2 BIT26 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_DMI BIT25 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_E3 BIT24 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_E2 BIT23 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_E1 BIT22 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_E0 BIT21 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_D3 BIT20 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_D2 BIT19 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_D1 BIT18 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_D0 BIT17 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_UFS BIT16 ///< UFS ModPHY SPD RT Request +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_XDCI BIT15 ///< xDCI ModPHY SPD RT Request +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_XHCI BIT14 ///< xHCI ModPHY SPD RT Request +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_GBE BIT13 ///< GbE ModPHY SPD RT Request +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_SATA BIT12 ///< SATA ModPHY SPD RT Request +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_C3 BIT11 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_C2 BIT10 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_C1 BIT9 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_C0 BIT8 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_B3 BIT7 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_B2 BIT6 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_B1 BIT5 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_B0 BIT4 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_A3 BIT3 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_A2 BIT2 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_A1 BIT1 +#define B_PMC_PWRM_MODPHY_PM_CFG5_MSPDRTREQ_A0 BIT0 +#define R_PMC_PWRM_MODPHY_PM_CFG6 0x10D4 + +#define R_PMC_PWRM_CPPM_MPG_POL1A 0x10E0 ///< CPPM modPHY Gating Policy Reg 1A +#define B_PMC_PWRM_CPPM_MPG_POL1A_CPPM_MODPHY_QUAL BIT30 ///< CPPM Shutdown Qualifier Enable for ModPHY +#define B_PMC_PWRM_CPPM_MPG_POL1A_LT_MODPHY_SEL BIT29 ///< ASLT/PLT Selection for ModPHY +#define B_PMC_PWRM_CPPM_MPG_POL1A_LTR_MODPHY_THRESH (0x000001FF) ///< LTR Threshold for ModPHY, [8:0] + +#define R_PMC_PWRM_EXT_V1P05_VR_CONFIG 0x11C0 +#define R_PMC_PWRM_EXT_VNN_VR_CONFIG0 0x11C4 +#define R_PMC_PWRM_VCCIN_AUX_CFG1 0x11D0 +#define R_PMC_PWRM_VCCIN_AUX_CFG2 0x11D4 + +#define R_PMC_PWRM_WINIDLE_BIOS_ENABLE 0x1400 +#define B_PMC_PWRM_WINIDLE_BIOS_ENABLE_WI_LOCK BIT31 +#define B_PMC_PWRM_WINIDLE_BIOS_ENABLE_WI_ENABLE BIT0 + +#define R_PMC_PWRM_WADT_AC 0x1800 +#define R_PMC_PWRM_PRSTS 0x1810 ///< Power and Reset Status +#define B_PMC_PWRM_PRSTS_VE_WD_TMR_STS BIT7 ///< VE Watchdog Timer Status +#define B_PMC_PWRM_PRSTS_WOL_OVR_WK_STS BIT5 +#define B_PMC_PWRM_PRSTS_FIELD_1 BIT4 +#define B_PMC_PWRM_PRSTS_ME_WAKE_STS BIT0 + +#define R_PMC_PWRM_1814 0x1814 +#define R_PMC_PWRM_CFG 0x1818 ///< Power Management Configuration +#define B_PMC_PWRM_CFG_ALLOW_24_OSC_SD BIT29 ///< Allow 24MHz Crystal Oscillator Shutdown +#define B_PMC_PWRM_CFG_DBG_MODE_LOCK BIT27 ///< Debug Mode Lock +#define B_PMC_PWRM_CFG_ALLOW_USB2_CORE_PG BIT25 ///< Allow USB2 Core Power Gating +#define B_PMC_PWRM_CFG_ER_LOCK BIT24 ///< Energy Reporting Lock +#define B_PMC_PWRM_CFG_EN_PMC_UNC_ERR BIT23 ///< Enable Global Reset on Uncorrectable Parity Error on PMC SRAM Interface +#define B_PMC_PWRM_CFG_PMCREAD_DISABLE BIT22 ///< Disable Reads to PMC +#define B_PMC_PWRM_CFG_RTC_DS_WAKE_DIS BIT21 ///< RTC Wake from Deep S4/S5 Disable +#define B_PMC_PWRM_CFG_SSMAW_MASK (BIT19 | BIT18) ///< SLP_SUS# Min Assertion Width +#define V_PMC_PWRM_CFG_SSMAW_4S (BIT19 | BIT18) ///< 4 seconds +#define V_PMC_PWRM_CFG_SSMAW_1S BIT19 ///< 1 second +#define V_PMC_PWRM_CFG_SSMAW_0_5S BIT18 ///< 0.5 second (500ms) +#define V_PMC_PWRM_CFG_SSMAW_0S 0 ///< 0 second +#define B_PMC_PWRM_CFG_SAMAW_MASK (BIT17 | BIT16) ///< SLP_A# Min Assertion Width +#define V_PMC_PWRM_CFG_SAMAW_2S (BIT17 | BIT16) ///< 2 seconds +#define V_PMC_PWRM_CFG_SAMAW_98ms BIT17 ///< 98ms +#define V_PMC_PWRM_CFG_SAMAW_4S BIT16 ///< 4 seconds +#define V_PMC_PWRM_CFG_SAMAW_0S 0 ///< 0 second +#define B_PMC_PWRM_CFG_RPCD_MASK (BIT9 | BIT8) ///< Reset Power Cycle Duration +#define V_PMC_PWRM_CFG_RPCD_1S (BIT9 | BIT8) ///< 1-2 seconds +#define V_PMC_PWRM_CFG_RPCD_2S BIT9 ///< 2-3 seconds +#define V_PMC_PWRM_CFG_RPCD_3S BIT8 ///< 3-4 seconds +#define V_PMC_PWRM_CFG_RPCD_4S 0 ///< 4-5 seconds (Default) +#define B_PMC_PWRM_CFG_COCS BIT5 ///< CPU OC Strap +#define B_PMC_PWRM_CFG_ER_EN BIT2 ///< Energy Reporting Enable +#define B_PMC_PWRM_CFG_TIMING_TPCH25 (BIT1 | BIT0) ///< tPCH25 timing + +#define R_PMC_PWRM_S3_PWRGATE_POL 0x1828 ///< S3 Power Gating Policies +#define B_PMC_PWRM_S3_PWRGATE_POL_S3DC_GATE_SUS BIT1 ///< Deep S3 Enable in DC Mode +#define B_PMC_PWRM_S3_PWRGATE_POL_S3AC_GATE_SUS BIT0 ///< Deep S3 Enable in AC Mode + +#define R_PMC_PWRM_S4_PWRGATE_POL 0x182C ///< Deep S4 Power Policies +#define B_PMC_PWRM_S4_PWRGATE_POL_S4DC_GATE_SUS BIT1 ///< Deep S4 Enable in DC Mode +#define B_PMC_PWRM_S4_PWRGATE_POL_S4AC_GATE_SUS BIT0 ///< Deep S4 Enable in AC Mode + +#define R_PMC_PWRM_S5_PWRGATE_POL 0x1830 ///< Deep S5 Power Policies +#define B_PMC_PWRM_S5_PWRGATE_POL_S5DC_GATE_SUS BIT15 ///< Deep S5 Enable in DC Mode +#define B_PMC_PWRM_S5_PWRGATE_POL_S5AC_GATE_SUS BIT14 ///< Deep S5 Enable in AC Mode + +#define R_PMC_PWRM_DSX_CFG 0x1834 ///< Deep SX Configuration +#define B_PMC_PWRM_DSX_CFG_WAKE_PIN_DSX_EN BIT2 ///< WAKE# Pin DeepSx Enable +#define B_PMC_PWRM_DSX_CFG_ACPRES_PD_DSX_DIS BIT1 ///< AC_PRESENT pin pulldown in DeepSx disable +#define B_PMC_PWRM_DSX_CFG_LAN_WAKE_EN BIT0 ///< LAN_WAKE Pin DeepSx Enable + +#define R_PMC_PWRM_CFG2 0x183C ///< Power Management Configuration Reg 2 +#define B_PMC_PWRM_CFG2_PBOP (BIT31 | BIT30 | BIT29) ///< Power Button Override Period (PBOP) +#define N_PMC_PWRM_CFG2_PBOP 29 ///< Power Button Override Period (PBOP) +#define B_PMC_PWRM_CFG2_PB_DIS BIT28 ///< Power Button Native Mode Disable (PB_DIS) +#define B_PMC_PWRM_CFG2_EN_DBG_MSG BIT27 ///< Enable PMC Debug Messages +#define B_PMC_PWRM_CFG2_DRAM_RESET_CTL BIT26 ///< DRAM RESET# control +#define N_PMC_PWRM_CFG2_DRAM_RESET_CTL 26 + +#define R_PMC_PWRM_EN_SN_SLOW_RING 0x1848 ///< Enable Snoop Request to SLOW_RING +#define R_PMC_PWRM_EN_SN_SLOW_RING2 0x184C ///< Enable Snoop Request to SLOW_RING 2nd Reg +#define R_PMC_PWRM_EN_SN_SA 0x1850 ///< Enable Snoop Request to SA +#define R_PMC_PWRM_EN_SN_SA2 0x1854 ///< Enable Snoop Request to SA 2nd Reg +#define R_PMC_PWRM_EN_SN_SLOW_RING_CF 0x1858 ///< Enable Snoop Request to SLOW_RING_CF +#define R_PMC_PWRM_EN_NS_SA 0x1868 ///< Enable Non-Snoop Request to SA +#define R_PMC_PWRM_EN_CW_SLOW_RING 0x1880 ///< Enable Clock Wake to SLOW_RING +#define R_PMC_PWRM_EN_CW_SLOW_RING2 0x1884 ///< Enable Clock Wake to SLOW_RING 2nd Reg +#define R_PMC_PWRM_EN_CW_SA 0x1888 ///< Enable Clock Wake to SA +#define R_PMC_PWRM_EN_CW_SA2 0x188C ///< Enable Clock Wake to SA 2nd Reg +#define R_PMC_PWRM_EN_CW_SLOW_RING_CF 0x1898 ///< Enable Clock Wake to SLOW_RING_CF +#define R_PMC_PWRM_EN_PA_SLOW_RING 0x18A8 ///< Enable Pegged Active to SLOW_RING +#define R_PMC_PWRM_EN_PA_SLOW_RING2 0x18AC ///< Enable Pegged Active to SLOW_RING 2nd Reg +#define B_PMC_PWRM_EN_PA_SLOW_RING2_GBETSN BIT26 ///< GBETSN Pegged Active to SLOW_RING +#define R_PMC_PWRM_EN_PA_SA 0x18B0 ///< Enable Pegged Active to SA +#define R_PMC_PWRM_EN_PA_SA2 0x18B4 ///< Enable Pegged Active to SA 2nd Reg +#define B_PMC_PWRM_EN_PA_SA2_GBETSN BIT26 ///< GBETSN Pegged Active to SA +#define R_PMC_PWRM_EN_MISC_EVENT 0x18C0 ///< Enable Misc PM_SYNC Events +#define R_PMC_PWRM_PMSYNC_TPR_CONFIG 0x18C4 +#define R_PMC_PWRM_SLP_S0_RESIDENCY_COUNTER 0x193C +#define R_PMC_PWRM_PS_ON_COUNTER 0x18F8 + +#define R_PMC_PWRM_PMSYNC_MISC_CFG 0x18C8 +#define B_PMC_PWRM_PMSYNC_TPR_CONFIG_LOCK BIT31 +#define B_PMC_PWRM_PMSYNC_PCH2CPU_TT_EN BIT26 +#define B_PMC_PWRM_PMSYNC_PCH2CPU_TT_STATE (BIT25 | BIT24) +#define N_PMC_PWRM_PMSYNC_PCH2CPU_TT_STATE 24 +#define V_PMC_PWRM_PMSYNC_PCH2CPU_TT_STATE_1 1 +#define B_PMC_PWRM_PMSYNC_PM_SYNC_LOCK BIT15 ///< PM_SYNC Configuration Lock +#define B_PMC_PWRM_PMSYNC_GPIO_D_SEL BIT11 +#define B_PMC_PWRM_PMSYNC_GPIO_C_SEL BIT10 + +#define R_PMC_PWRM_PM_SYNC_STATE_HYS 0x18D0 ///< PM_SYNC State Hysteresis +#define R_PMC_PWRM_PM_SYNC_MODE 0x18D4 ///< PM_SYNC Pin Mode + +#define R_PMC_PWRM_CFG3 0x18E0 ///< Power Management Configuration Reg 3 +#define B_PMC_PWRM_CFG3_HOST_WLAN_PP_EN BIT17 ///< Host Wireless LAN Phy Power Enable +#define B_PMC_PWRM_CFG3_DSX_WLAN_PP_EN BIT16 ///< Deep-Sx WLAN Phy Power Enable +#define B_PMC_PWRM_CFG3_HOST_MISC_CORE_CFG_CPU_VCC_MAP BIT2 ///< Enable CPU Vcc Mapping + +#define R_PMC_PWRM_PM_DOWN_PPB_CFG 0x18E4 ///< PM_DOWN PCH_POWER_BUDGET CONFIGURATION + +#define R_PMC_PWRM_CFG4 0x18E8 ///< Power Management Configuration Reg 4 +#define B_PMC_PWRM_CFG4_CEC_EN BIT31 ///< CEC_EN +#define B_PMC_PWRM_CFG4_U2_PHY_PG_EN BIT30 ///< USB2 PHY SUS Well Power Gating Enable +#define B_PMC_PWRM_CFG4_SLPS0_PSON_TMR (BIT29 | BIT28 | BIT27 | BIT26 | BIT25 | BIT24 | BIT23) ///< SLPS0_PSON_TMR +#define N_PMC_PWRM_CFG4_SLPS0_PSON_TMR 23 +#define V_PMC_PWRM_CFG4_SLPS0_PSON_TMR_5MS 0xA +#define V_PMC_PWRM_CFG4_SLPS0_PSON_TMR_15_5MS 0x1F +#define B_PMC_PWRM_CFG4_PSON_SLPS0_TMR (BIT22 | BIT21 | BIT20 | BIT19 | BIT18) ///< PSON_SLPS0_TMR +#define N_PMC_PWRM_CFG4_PSON_SLPS0_TMR 18 +#define V_PMC_PWRM_CFG4_PSON_SLPS0_TMR_100MS 0x5 +#define V_PMC_PWRM_CFG4_PSON_SLPS0_TMR_620MS 0x1F +#define N_PMC_PWRM_CFG4_VCCST_TMR 12 +#define B_PMC_PWRM_CFG4_VCCST_TMR (BIT15 | BIT14 | BIT13 | BIT12) +#define B_PMC_PWRM_CFG4_CPU_IOVR_RAMP_DUR (0x000001FF) ///< CPU I/O VR Ramp Duration, [8:0] +#define N_PMC_PWRM_CFG4_CPU_IOVR_RAMP_DUR 0 + +#define R_PMC_PWRM_CPU_EPOC 0x18EC +#define N_PMC_PWRM_CPU_EPOC_DATA_17 17 +#define N_PMC_PWRM_CPU_EPOC_DATA_20 20 + +#define R_PCH_PMC_MSG_ADR_EN 0x18F0 ///< ADR Enable +#define B_PCH_PMC_MSG_ADR_EN_HPR_ADR_EN 0x10000000 ///< Host Partition Reset ADR Enable +#define N_PCH_PMC_MSG_ADR_EN_HPR_ADR_EN 28 +#define B_PCH_PMC_MSG_ADR_EN_ADR_FEAT_EN 0x1 ///< ADR Feature Enable +#define N_PCH_PMC_MSG_ADR_EN_ADR_FEAT_EN 0 + +#define R_PMC_PWRM_PM_SYNC_MODE_C0 0x18F4 +#define R_PMC_PWRM_ACPI_TMR_CTL 0x18FC +#define B_PMC_PWRM_ACPI_TMR_CTL_DIS BIT1 + +#define R_PCH_PMC_MSG_ADR_GEN_CFG 0x1908 ///< ADR General Configuration Register +#define B_PCH_PMC_MSG_ADR_GEN_CFG_ADR_P2_TIMER_SCALE 0x1C000000 ///< ADR Timer Scale +#define N_PCH_PMC_MSG_ADR_GEN_CFG_ADR_P2_TIMER_SCALE 26 +#define B_PCH_PMC_MSG_ADR_GEN_CFG_ADR_P2_EN 0x80000 ///< ADR Phase 2 Enable +#define N_PCH_PMC_MSG_ADR_GEN_CFG_ADR_P2_EN 19 +#define B_PCH_PMC_MSG_ADR_GEN_CFG_ADR_P2_TIMER_TOV 0x7F800 ///< ADR Timer Base +#define N_PCH_PMC_MSG_ADR_GEN_CFG_ADR_P2_TIMER_TOV 11 +#define B_PCH_PMC_MSG_ADR_GEN_CFG_ADR_P1_TIMER_SCALE 0x700 ///< ADR Timer Scale (Tick Frequency) +#define N_PCH_PMC_MSG_ADR_GEN_CFG_ADR_P1_TIMER_SCALE 8 +#define B_PCH_PMC_MSG_ADR_GEN_CFG_ADR_P1_TIMER_TOV 0xFF ///< ADR Timer Base +#define N_PCH_PMC_MSG_ADR_GEN_CFG_ADR_P1_TIMER_TOV 0 + +#define R_PMC_PWRM_GPIO_CFG 0x1920 +#define B_PMC_PWRM_GPIO_CFG_GPE0_DW2 (BIT11 | BIT10 | BIT9 | BIT8) +#define N_PMC_PWRM_GPIO_CFG_GPE0_DW2 8 +#define B_PMC_PWRM_GPIO_CFG_GPE0_DW1 (BIT7 | BIT6 | BIT5 | BIT4) +#define N_PMC_PWRM_GPIO_CFG_GPE0_DW1 4 +#define B_PMC_PWRM_GPIO_CFG_GPE0_DW0 (BIT3 | BIT2 | BIT1 | BIT0) +#define N_PMC_PWRM_GPIO_CFG_GPE0_DW0 0 + +#define R_PMC_PWRM_1924 0x1924 +#define R_PMC_PWRM_PMLDOCTRL 0x1A00 ///< PMC LDO Control Register +#define B_PMC_PWRM_PMDLOCTRL_U31P2_LDODSEN BIT24 +#define B_PMC_PWRM_PMLDOCTRL_CNVIP24LDOLPEN BIT9 +#define B_PMC_PWRM_PMLDOCTRL_USB2TS1P3LDODSEN BIT0 + +#define R_PMC_PWRM_HPR_CAUSE0 0x192C ///< Host partition reset causes +#define B_PMC_PWRM_HPR_CAUSE0_GBL_TO_HOST BIT15 ///< Global reset converted to Host reset + +#define R_PMC_PWRM_CORE_SPARE_GCR 0x195C + +#define R_PCH_PMC_MSG_ADR_CTRL_STS 0x1960 ///< PCH Power Management Status +#define B_PCH_PMC_MSG_ADR_CTRL_STS_ADR_RST_STS 0x10000 ///< ADR Reset Status +#define N_PCH_PMC_MSG_ADR_CTRL_STS_ADR_RST_STS 16 + +#define R_PCH_PMC_MSG_ADR_GBLRST_EN_0 0x191C ///< ADR Global Reset Enable 0 +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_PPBR_PARITY_ERR 0x20000000 ///< ppbr_parity_err +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_PMC_RF_FUSA_ERR 0x1000000 ///< pmc_rf_fusa_err +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_PMC_IROM_PARITY 0x800000 ///< pmc_irom_parity +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_PMC_SRAM_UNC_ERR 0x400000 ///< pmc_sram_unc_err +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_CSE_HEC_UNC_ERR 0x200000 ///< cse_hec_unc_err +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_OCWDT_ICC 0x100000 ///< ocwdt_icc +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_OCWDT_NOICC 0x80000 ///< ocwdt_noicc +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_ADR_GPIO 0x40000 ///< adr_gpio +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_ME_UNC_ERR 0x20000 ///< me_unc_err +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_CPU_THRM_WDT 0x10000 ///< cpu_thrm_wdt +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_MIA_UX_ERR 0x8000 ///< mia_ux_err +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_MIA_UXS_ERR 0x4000 ///< mia_uxs_err +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_SYSPWR_FLR 0x1000 ///< syspwr_flr +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_PCHPWR_FLR 0x800 ///< pchpwr_flr +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_PMC_FW 0x400 ///< pmc_fw +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_ME_WDT 0x200 ///< me_wdt +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_PMC_WDT 0x100 ///< pmc_wdt +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_LT_RESET 0x80 ///< lt_reset +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_MEGBL 0x40 ///< megbl +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_CPU_THRM 0x20 ///< cpu_thrm +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_ME_PBO 0x10 ///< me_pbo +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_PCH_THRM 0x8 ///< pch_thrm +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_PMC_UNC_ERR 0x4 ///< pmc_unc_err +#define B_PCH_PMC_MSG_ADR_GBLRST_EN_0_PBO 0x2 ///< pbo + +#define R_PMC_PWRM_S0IX_LDO_OFF_COUNT 0x1A04 ///< PMC LDO S0ix Shutdown Count Register +#define B_PMC_PWRM_S0IX_LDO_OFF_COUNT_LOCK BIT31 +#define R_PMC_PWRM_S0_LDO_OFF_COUNT 0x1A08 ///< PMC LDO S0 Shutdown Count Register +#define B_PMC_PWRM_S0_LDO_OFF_COUNT_LOCK BIT31 + +#define R_PMC_PWRM_OBFF_CFG 0x1B14 ///< OBFF Configuration +#define R_PMC_PWRM_1B1C 0x1B1C +#define R_PMC_PWRM_CPPM_MISC_CFG 0x1B20 ///< CPPM Miscellaneous Configuration +#define R_PMC_PWRM_CPPM_CG_POL1A 0x1B24 ///< CPPM Clock Gating Policy Reg 1 +#define R_PMC_PWRM_CPPM_CG_POL1B 0x1B28 ///< CPPM Clock Gating Policy Reg 1 +#define B_PMC_PWRM_CPPM_FIVR_POL1B_TNTE_FIVR_VOLT_PRE_WAKE 0x1FFFF ///< TNTE PreWake for FIVR Voltage +#define R_PMC_PWRM_CPPM_CG_POL2A 0x1B40 ///< CPPM Clock Gating Policy Reg 3 +#define R_PMC_PWRM_1B4C 0x1B4C + +#define R_PMC_PWRM_CPPM_CG_POL3A 0x1BA8 ///< CPPM Clock Gating Policy Reg 5 +#define B_PMC_PWRM_CPPM_CG_POLXA_LT_GX_SEL BIT29 ///< ASLT/PLT Selection for Clock Source Group 1 +#define B_PMC_PWRM_CPPM_CG_POLXA_CPPM_GX_QUAL BIT30 ///< CPPM Shutdown Qualifier Enable for Clock Source Group X +#define B_PMC_PWRM_CPPM_CG_POLXA_LTR_GX_THRESH (0x000001FF) ///< LTR Threshold for Clock Source Group X, [8:0] + +#define R_PMC_PWRM_1BD0 0x1BD0 + +#define R_PMC_PWRM_ACPI_CNT 0x1BD8 ///< in CNL located in PWRM +#define B_PMC_PWRM_ACPI_CNT_PWRM_EN BIT8 ///< PWRM enable +#define B_PMC_PWRM_ACPI_CNT_ACPI_EN BIT7 ///< ACPI enable +#define B_PMC_PWRM_ACPI_CNT_SCIS (BIT2 | BIT1 | BIT0) ///< SCI IRQ select +#define V_PMC_PWRM_ACPI_CNT_SCIS_IRQ9 0 +#define V_PMC_PWRM_ACPI_CNT_SCIS_IRQ10 1 +#define V_PMC_PWRM_ACPI_CNT_SCIS_IRQ11 2 +#define V_PMC_PWRM_ACPI_CNT_SCIS_IRQ20 4 +#define V_PMC_PWRM_ACPI_CNT_SCIS_IRQ21 5 +#define V_PMC_PWRM_ACPI_CNT_SCIS_IRQ22 6 +#define V_PMC_PWRM_ACPI_CNT_SCIS_IRQ23 7 + +#define R_PMC_PWRM_BM_CX_CNF 0x1BDC ///< in CNL this is PWRM register +#define B_PMC_PWRM_BM_CX_CNF_STORAGE_BREAK_EN BIT31 +#define B_PMC_PWRM_BM_CX_CNF_PCIE_BREAK_EN BIT30 +#define B_PMC_PWRM_BM_CX_CNF_AZ_BREAK_EN BIT24 +#define B_PMC_PWRM_BM_CX_CNF_DPSN_BREAK_EN BIT19 +#define B_PMC_PWRM_BM_CX_CNF_XHCI_BREAK_EN BIT17 +#define B_PMC_PWRM_BM_CX_CNF_SATA3_BREAK_EN BIT16 +#define B_PMC_PWRM_BM_CX_CNF_SCRATCHPAD BIT15 +#define B_PMC_PWRM_BM_CX_CNF_PHOLD_BM_STS_BLOCK BIT14 +#define B_PMC_PWRM_BM_CX_CNF_MASK_CF BIT11 +#define B_PMC_PWRM_BM_CX_CNF_BM_STS_ZERO_EN BIT10 +#define B_PMC_PWRM_BM_CX_CNF_PM_SYNC_MSG_MODE BIT9 + +#define R_PMC_PWRM_THROT_1 0x1BE0 +#define B_PMC_PWRM_THROT_1_VR_ALERT BIT0 + +#define R_PMC_PWRM_CS_SD_CTL1 0x1BE8 ///< Clock Source Shutdown Control Reg 1 +#define B_PMC_PWRM_CS_SD_CTL1_CS5_CTL_CFG (BIT22 | BIT21 | BIT20) ///< Clock Source 5 Control Configuration +#define N_PMC_PWRM_CS_SD_CTL1_CS5_CTL_CFG 20 +#define B_PMC_PWRM_CS_SD_CTL1_CS1_CTL_CFG (BIT2 | BIT1 | BIT0) ///< Clock Source 1 Control Configuration +#define N_PMC_PWRM_CS_SD_CTL1_CS1_CTL_CFG 0 + +#define R_PMC_PWRM_CS_SD_CTL2 0x1BEC ///< Clock Source Shutdown Control Reg 2 +#define B_PMC_PWRM_CS_SD_CTL2_CS3_OVR_EN BIT18 ///< Clock Source 3 Override Enable + +#define R_PMC_PWRM_LPM_ADEM_HOST_CTRL 0x1C20 ///< Low Power Mode Auto-Demotion Host Control +#define B_PMC_PWRM_LPM_ADEM_HOST_CTRL_EN BIT0 ///< Low Power Mode Auto-Demotion Host Enable + +#define R_PMC_PWRM_HSWPGCR1 0x1DD0 +#define B_PMC_PWRM_SW_PG_CTRL_LOCK BIT31 +#define B_PMC_PWRM_NPK_AON_SW_PG_CTRL BIT1 +#define B_PMC_PWRM_NPK_VNN_SW_PG_CTRL BIT0 + +#define R_PMC_PWRM_1E00 0x1E00 +#define R_PMC_PWRM_1E04 0x1E04 + +#define R_PMC_PWRM_ST_PG_FDIS_PMC_1 0x1E20 ///< Static PG Related Function Disable Register 1 +#define B_PMC_PWRM_ST_PG_FDIS_PMC_1_CNVI_FDIS_PMC BIT1 ///< CNVi Function Disable (PMC Version) (CNVI_FDIS_PMC) +#define B_PMC_PWRM_ST_PG_FDIS_PMC_1_ST_FDIS_LK BIT31 ///< Static Function Disable Lock (ST_FDIS_LK) +#define B_PMC_PWRM_ST_PG_FDIS_PMC_1_CAM_FDIS_PMC BIT6 ///< Camera Function Disable (PMC Version) (CAM_FDIS_PMC) +#define B_PMC_PWRM_ST_PG_FDIS_PMC_1_ISH_FDIS_PMC BIT5 ///< SH Function Disable (PMC Version) (ISH_FDIS_PMC) +#define B_PMC_PWRM_ST_PG_FDIS_PMC_1_GBE_FDIS_PMC BIT0 ///< GBE Function Disable (PMC Version) (GBE_FDIS_PMC) + +#define R_PMC_PWRM_ST_PG_FDIS_PMC_2 0x1E24 ///< Static Function Disable Control Register 2 +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_GSPI2_FDIS_PMC BIT11 ///< SerialIo Controller GSPI Device 2 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_GSPI1_FDIS_PMC BIT10 ///< SerialIo Controller GSPI Device 1 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_GSPI0_FDIS_PMC BIT9 ///< SerialIo Controller GSPI Device 0 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_UART2_FDIS_PMC BIT8 ///< SerialIo Controller UART Device 2 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_UART1_FDIS_PMC BIT7 ///< SerialIo Controller UART Device 1 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_UART0_FDIS_PMC BIT6 ///< SerialIo Controller UART Device 0 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_I2C5_FDIS_PMC BIT5 ///< SerialIo Controller I2C Device 5 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_I2C4_FDIS_PMC BIT4 ///< SerialIo Controller I2C Device 4 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_I2C3_FDIS_PMC BIT3 ///< SerialIo Controller I2C Device 3 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_I2C2_FDIS_PMC BIT2 ///< SerialIo Controller I2C Device 2 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_I2C1_FDIS_PMC BIT1 ///< SerialIo Controller I2C Device 1 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_I2C0_FDIS_PMC BIT0 ///< SerialIo Controller I2C Device 0 Function Disable +#define B_PMC_PWRM_ST_PG_FDIS_PMC_2_SERIALIO 0xFFF ///< SerialIo Devices Disable Mask + +#define R_PMC_PWRM_NST_PG_FDIS_1 0x1E28 +#define B_PCH_H_PMC_PWRM_NST_PG_FDIS_1_PCIE_F3_FDIS_PMC BIT31 ///< PCIe Controller F Port 3 Function Disable +#define B_PCH_H_PMC_PWRM_NST_PG_FDIS_1_PCIE_F2_FDIS_PMC BIT30 ///< PCIe Controller F Port 2 Function Disable +#define B_PCH_H_PMC_PWRM_NST_PG_FDIS_1_PCIE_F1_FDIS_PMC BIT29 ///< PCIe Controller F Port 1 Function Disable +#define B_PCH_H_PMC_PWRM_NST_PG_FDIS_1_PCIE_F0_FDIS_PMC BIT28 ///< PCIe Controller F Port 0 Function Disable +#define B_PCH_LP_PMC_PWRM_NST_PG_FDIS_1_SDCARD_FDIS_PMC BIT29 ///< SD Card Function Disable +#define B_PCH_H_PMC_PWRM_NST_PG_FDIS_1_SDCARD_FDIS_PMC BIT27 ///< SD Card Function Disable +#define B_PCH_LP_PMC_PWRM_NST_PG_FDIS_1_EMMC_FDIS_PMC BIT28 ///< eMMC Function Disable +#define B_PCH_LP_PMC_PWRM_NST_PG_FDIS_1_UFS_FDIS_PMC BIT27 ///< UFS Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_XDCI_FDIS_PMC BIT26 ///< XDCI Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_SMBUS_FDIS_PMC BIT25 ///< Smbus Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_ADSP_FDIS_PMC BIT23 ///< ADSP Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_SATA_FDIS_PMC BIT22 ///< SATA Function Disable +#define B_PCH_H_PMC_PWRM_NST_PG_FDIS_1_PCIE_E3_FDIS_PMC BIT21 ///< PCIe Controller E Port 3 Function Disable +#define B_PCH_H_PMC_PWRM_NST_PG_FDIS_1_PCIE_E2_FDIS_PMC BIT20 ///< PCIe Controller E Port 2 Function Disable +#define B_PCH_H_PMC_PWRM_NST_PG_FDIS_1_PCIE_E1_FDIS_PMC BIT19 ///< PCIe Controller E Port 1 Function Disable +#define B_PCH_H_PMC_PWRM_NST_PG_FDIS_1_PCIE_E0_FDIS_PMC BIT18 ///< PCIe Controller E Port 0 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_D3_FDIS_PMC BIT17 ///< PCIe Controller D Port 3 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_D2_FDIS_PMC BIT16 ///< PCIe Controller D Port 2 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_D1_FDIS_PMC BIT15 ///< PCIe Controller D Port 1 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_D0_FDIS_PMC BIT14 ///< PCIe Controller D Port 0 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_C3_FDIS_PMC BIT13 ///< PCIe Controller C Port 3 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_C2_FDIS_PMC BIT12 ///< PCIe Controller C Port 2 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_C1_FDIS_PMC BIT11 ///< PCIe Controller C Port 1 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_C0_FDIS_PMC BIT10 ///< PCIe Controller C Port 0 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_B3_FDIS_PMC BIT9 ///< PCIe Controller B Port 3 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_B2_FDIS_PMC BIT8 ///< PCIe Controller B Port 2 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_B1_FDIS_PMC BIT7 ///< PCIe Controller B Port 1 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_B0_FDIS_PMC BIT6 ///< PCIe Controller B Port 0 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_A3_FDIS_PMC BIT5 ///< PCIe Controller A Port 3 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_A2_FDIS_PMC BIT4 ///< PCIe Controller A Port 2 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_A1_FDIS_PMC BIT3 ///< PCIe Controller A Port 1 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_PCIE_A0_FDIS_PMC BIT2 ///< PCIe Controller A Port 0 Function Disable +#define B_PMC_PWRM_NST_PG_FDIS_1_XHCI_FDIS_PMC BIT0 ///< XHCI Function Disable + +#define R_PMC_PWRM_FUSE_DIS_RD_1 0x1E40 ///< Fuse Disable Read 1 Register + +#define R_PMC_PWRM_FUSE_DIS_RD_2 0x1E44 ///< Fuse Disable Read 2 Register +#define B_PMC_PWRM_FUSE_DIS_RD_2_SPC_SS_DIS BIT25 ///< SPC Fuse Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_SPB_SS_DIS BIT24 ///< SPB Fuse Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_SPA_SS_DIS BIT23 ///< SPA Fuse Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_PSTH_FUSE_SS_DIS BIT21 ///< PSTH Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_DMI_FUSE_SS_DIS BIT20 ///< DMI Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_OTG_FUSE_SS_DIS BIT19 ///< OTG Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_XHCI_SS_DIS BIT18 ///< XHCI Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_FIA_FUSE_SS_DIS BIT17 ///< FIA Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_DSP_FUSE_SS_DIS BIT16 ///< DSP Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_SATA_FUSE_SS_DIS BIT15 ///< SATA Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_ICC_FUSE_SS_DIS BIT14 ///< ICC Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_LPC_FUSE_SS_DIS BIT13 ///< LPC Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_RTC_FUSE_SS_DIS BIT12 ///< RTC Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_P2S_FUSE_SS_DIS BIT11 ///< P2S Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_TRSB_FUSE_SS_DIS BIT10 ///< TRSB Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_SMB_FUSE_SS_DIS BIT9 ///< SMB Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_ITSS_FUSE_SS_DIS BIT8 ///< ITSS Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_UFSX2_FUSE_SS_DIS BIT7 ///< UFSX2 Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_SERIALIO_FUSE_SS_DIS BIT6 ///< SerialIo Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_EMMC_FUSE_SS_DIS BIT5 ///< EMMC Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_CNVI_FUSE_SS_DIS BIT4 ///< CNVi Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_P2D_FUSE_SS_DIS BIT3 ///< P2D Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_SDX_FUSE_SS_DIS BIT2 ///< SD Conroller Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_ISH_FUSE_SS_DIS BIT1 ///< ISH Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_2_GBE_FUSE_SS_DIS BIT0 ///< GBE Fuse or Soft Strap Disable + +#define R_PMC_PWRM_FUSE_DIS_RD_3 0x1E48 ///< Static PG Fuse and Soft Strap Disable Read Register 3 +#define B_PMC_PWRM_FUSE_DIS_RD_3_PNCRA3_FUSE_SS_DIS BIT3 ///< PNCRA3 Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_3_PNCRA2_FUSE_SS_DIS BIT2 ///< PNCRA2 Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_3_PNCRA1_FUSE_SS_DIS BIT1 ///< PNCRA1 Fuse or Soft Strap Disable +#define B_PMC_PWRM_FUSE_DIS_RD_3_PNCRA_FUSE_SS_DIS BIT0 ///< PNCRA Fuse or Soft Strap Disable + +#define R_PMC_PWRM_1E4C 0x1E4C + +// +// Low Power Mode requirements - 1st register +// +#define R_PMC_LPM0_REQ_0 0x1000 ///<Low Power Mode 0 Requirements Reg 0 +// +// Low Power Mode requirements - End register +// +#define R_PMC_LPM7_REQ_5 0x1164 ///<Low Power Mode 7 Requirements Reg 5 +// +// Low Power Mode requirements - data length (byte) +// +#define PMC_LPM_REQ_DATA_LEN 192 +// +// Low Power Mode requirements - data length (bit) +// +#define PMC_LPM_REQ_BITS_DATA_LEN 1536 + +Scope (\_SB) { + // + // IPC Methods + // + // Send PMC IPC 1 Read/Write command + // Input + // Arg0: Command Command to be issued to PMC IPC 1 interface + // Arg1: SubCmdId SUB_CMD_ID for provided Command + // Arg2: CmdSize Total size in byte to be sent via PMC IPC 1 interface + // Arg3: WriteBuf0 1st DWORD Value to be issued to PMC IPC 1 interface + // Arg4: WriteBuf1 2nd DWORD Value to be issued to PMC IPC 1 interface + // Arg5: WriteBuf2 3rd DWORD Value to be issued to PMC IPC 1 interface + // Arg6: WriteBuf3 4th DWORD Value to be issued to PMC IPC 1 interface + // Output + // Package of data in below order: + // Status Status of the transaction {0 indicates success, non-zero indicates failure} + // Error Code Description + // ---------- --------------------- + // 1 Command Size Exceeds + // 2 Device failure + // 3 Timeout Occurred + // ---------- --------------------- + // ReadBuf Structure of 4 DWORDs to be filled by PMC IPC 1 interface + // + Method(IPCS, 7, Serialized){ + Name(RPKG, Package (5) { + Zero, // Status + Zero, // ReadBuf0 + Zero, // ReadBuf1 + Zero, // ReadBuf2 + Zero // ReadBuf3 + }) + + //ADBG("PMC IPC") // //ADBG:RestrictedContent + //ADBG (Concatenate("Command: ", ToHexString(Arg0))) // //ADBG:RestrictedContent + //ADBG (Concatenate("SubCmdId: ", ToHexString(Arg1))) // //ADBG:RestrictedContent + //ADBG (Concatenate("Size: ", ToHexString(Arg2))) // //ADBG:RestrictedContent + //ADBG (Concatenate("WBuff0: ", ToHexString(Arg3))) // //ADBG:RestrictedContent + //ADBG (Concatenate("WBuff1: ", ToHexString(Arg4))) // //ADBG:RestrictedContent + //ADBG (Concatenate("WBuff2: ", ToHexString(Arg5))) // //ADBG:RestrictedContent + //ADBG (Concatenate("WBuff3: ", ToHexString(Arg6))) // //ADBG:RestrictedContent + + if (LGreater(Arg2, 16)) // (CmdSize > 16) + { + //ADBG("CmdSize>16 Error") // PCH:InternalOnly + Store(1, Index(RPKG, 0)) // Store Errorcode of Command Size Exceeds to Status + Return(RPKG) + } + + // + // Program the Write Buffers with the Data that needs to be written to PMC + // + Store(Arg3,IWB0) + Store(Arg4,IWB1) + Store(Arg5,IWB2) + Store(Arg6,IWB3) + + // + // Program the command register with command and size + // + Store(0, Local0) + Add(Local0, ShiftLeft(Arg0,N_PMC_PWRM_IPC_CMD_COMMAND), Local0) + Add(Local0, ShiftLeft(Arg1,N_PMC_PWRM_IPC_CMD_CMD_ID), Local0) + Add(Local0, ShiftLeft(Arg2,N_PMC_PWRM_IPC_CMD_SIZE), Local0) + Store(Local0,CMDR) + + /// + /// Read the IPC_STS to get BUSY or Error status + /// Break on 10ms timeout or error + /// + Store(0, Local0) + While(1) { + If(LOr(LNot(IBSY),LEqual(IERR, 1))){ + Break + } + If(Lgreater(Local0, 10)) { // 10 ms timeout + //ADBG("IPC Busy TO") // //ADBG:RestrictedContent + Store(3, Index(RPKG, 0)) // Store Errorcode of Timeout Occurred to Status + Return(RPKG) + } + Sleep(1) + Increment(Local0) + } + If(LEqual(IERR,1)) { + //ADBG("IPC Error:") // //ADBG:RestrictedContent + //ADBG(IERC) // //ADBG:RestrictedContent + //ADBG(arg0) // //ADBG:RestrictedContent + //ADBG(arg1) // //ADBG:RestrictedContent + //ADBG(arg2) // //ADBG:RestrictedContent + //ADBG(arg3) // //ADBG:RestrictedContent + //ADBG(arg4) // //ADBG:RestrictedContent + //ADBG(arg5) // //ADBG:RestrictedContent + //ADBG(arg6) // //ADBG:RestrictedContent + Store(2, Index(RPKG, 0)) // Store Errorcode of Device Failure to Status + Return(RPKG) + } + + // + // Fill the ReadBuffer contents with the Data that needs to be read from PMC + // + Store(IRB0, Index(RPKG, 1)) // ReadBuf0 + Store(IRB1, Index(RPKG, 2)) // ReadBuf1 + Store(IRB2, Index(RPKG, 3)) // ReadBuf2 + Store(IRB3, Index(RPKG, 4)) // ReadBuf3 + + Return(RPKG) + } + + // + // Define PCH ACPIBASE I/O as an ACPI operating region. The base address + // can be found in Device 31, Function 2, Offset 40h. + // + /* + OperationRegion(PMIO, SystemIo, PMBS, 0x80) + Field(PMIO, ByteAcc, NoLock, Preserve) { + , 8, + PBSS, 1, // Power Button Status + Offset(R_ACPI_IO_GPE_CNTL), // 0x40, General Purpose Event Control + , 17, + GPEC, 1, // Software GPE Control + Offset(R_ACPI_IO_GPE0_STS_127_96), // 0x6C, General Purpose Event 0 Status [127:96] + , 19, + CPWS, 1, // CPU WAKE STATUS + Offset(R_ACPI_IO_GPE0_EN_127_96), // 0x7C, General Purpose Event 0 Enable [127:96] + , 19, + CPWE, 1 // CPU WAKE EN + } +*/ + // + // Define PCH TCOBASE I/O + // + /* + OperationRegion(TCBA, SystemIo, TCBS, 0x10) + Field(TCBA, ByteAcc, NoLock, Preserve) { + Offset(R_TCO_IO_TCO1_STS), // 0x04 + , 9, + CPSC, 1, // CPUSCI_STS + } +*/ + // + // PWRM register definitions + // + OperationRegion(PWMR, SystemMemory, 0xFE000000, 0x1E30) + Field(PWMR, DWordAcc, NoLock, Preserve) { + // + // IPC definitions + // + Offset(R_PMC_PWRM_IPC_CMD), // IPC Command (IPC_CMD) + CMDR, 32, // Command register. Includes: [7:0] Command, [8] MSI, [15:12] CMD_ID, [23:16] Size + Offset(R_PMC_PWRM_IPC_STS), // IPC Status (IPC_STS) + IBSY, 1, // [0] Ready/Busy (BUSY) + IERR, 1, // [1] Error (ERROR) + , 1, // [2] IRQ (IRQ) + , 1, // [3] Reserved + , 4, // [7:4] Command ID (CMD_ID) + , 8, // [15:8] Initiator ID (INIT_ID) + IERC, 8, // [23:16] Error Code (ERROR CODE) + , 8, // [31:24] Reserved + Offset(R_PMC_PWRM_IPC_WBUF0), // IPC Write Buffer (IPC_WBUF0) + IWB0, 32, // [31:0] Write Buffer (WBUF) + Offset(R_PMC_PWRM_IPC_WBUF1), // IPC Write Buffer (IPC_WBUF1) + IWB1, 32, // [31:0] Write Buffer (WBUF) + Offset(R_PMC_PWRM_IPC_WBUF2), // IPC Write Buffer (IPC_WBUF2) + IWB2, 32, // [31:0] Write Buffer (WBUF) + Offset(R_PMC_PWRM_IPC_WBUF3), // IPC Write Buffer (IPC_WBUF3) + IWB3, 32, // [31:0] Write Buffer (WBUF) + Offset(R_PMC_PWRM_IPC_RBUF0), // IPC Read Buffer (IPC_RBUF0) + IRB0, 32, // [31:0] Read Buffer (RBUF) + Offset(R_PMC_PWRM_IPC_RBUF1), // IPC Read Buffer (IPC_RBUF1) + IRB1, 32, // [31:0] Read Buffer (RBUF) + Offset(R_PMC_PWRM_IPC_RBUF2), // IPC Read Buffer (IPC_RBUF2) + IRB2, 32, // [31:0] Read Buffer (RBUF) + Offset(R_PMC_PWRM_IPC_RBUF3), // IPC Read Buffer (IPC_RBUF3) + IRB3, 32, // [31:0] Read Buffer (RBUF) + Offset(R_PMC_PWRM_MODPHY_PM_CFG5), + RAA0, 1, // BIT0 : PCIE A, Function 0 + RAA1, 1, // BIT1 : PCIE A, Function 1 + RAA2, 1, // BIT2 : PCIE A, Function 2 + RAA3, 1, // BIT3 : PCIE A, Function 3 + RPB0, 1, // BIT4 : PCIE B, Function 0 + RPB1, 1, // BIT5 : PCIE B, Function 1 + RPB2, 1, // BIT6 : PCIE B, Function 2 + RPB3, 1, // BIT7 : PCIE B, Function 3 + RPC0, 1, // BIT8 : PCIE C, Function 0 + RPC1, 1, // BIT9 : PCIE C, Function 1 + RPC2, 1, // BIT10 : PCIE C, Function 2 + RPC3, 1, // BIT11 : PCIE C, Function 3 + RSAT, 1, // BIT12 : SATA + RGBE, 1, // BIT13 : GBE + RXHC, 1, // BIT14 : XHCI + RXDC, 1, // BIT15 : XDCI + RUFS, 1, // BIT16 : UFS + RPD0, 1, // BIT17 : PCIE D, Function 0 + RPD1, 1, // BIT18 : PCIE D, Function 1 + RPD2, 1, // BIT18 : PCIE D, Function 2 + RPD3, 1, // BIT20 : PCIE D, Function 3 + RPE0, 1, // BIT21 : PCIE E, Function 0 + RPE1, 1, // BIT22 : PCIE E, Function 1 + RPE2, 1, // BIT23 : PCIE E, Function 2 + RPE3, 1, // BIT24 : PCIE E, Function 3 + Offset(R_PMC_PWRM_MODPHY_PM_CFG6), + APA0, 1, // BIT0 : PCIE A, Function 0 + APA1, 1, // BIT1 : PCIE A, Function 1 + APA2, 1, // BIT2 : PCIE A, Function 2 + APA3, 1, // BIT3 : PCIE A, Function 3 + APB0, 1, // BIT4 : PCIE B, Function 0 + APB1, 1, // BIT5 : PCIE B, Function 1 + APB2, 1, // BIT6 : PCIE B, Function 2 + APB3, 1, // BIT7 : PCIE B, Function 3 + APC0, 1, // BIT8 : PCIE C, Function 0 + APC1, 1, // BIT9 : PCIE C, Function 1 + APC2, 1, // BIT10 : PCIE C, Function 2 + APC3, 1, // BIT11 : PCIE C, Function 3 + ASAT, 1, // BIT12 : SATA + AGBE, 1, // BIT13 : GBE + AXHC, 1, // BIT14 : XHCI + AXDC, 1, // BIT15 : XDCI + AUFS, 1, // BIT16 : UFS + APD0, 1, // BIT17 : PCIE D, Function 0 + APD1, 1, // BIT18 : PCIE D, Function 1 + APD2, 1, // BIT18 : PCIE D, Function 2 + APD3, 1, // BIT20 : PCIE D, Function 3 + APE0, 1, // BIT21 : PCIE E, Function 0 + APE1, 1, // BIT22 : PCIE E, Function 1 + APE2, 1, // BIT23 : PCIE E, Function 2 + APE3, 1, // BIT24 : PCIE E, Function 3 + Offset(R_PMC_PWRM_WADT_AC), + // + // AdvancedFeaturesBegin + // + ACWA, 32, // Wake Alarm Device Timer: AC + DCWA, 32, // Wake Alarm Device Timer: DC + ACET, 32, // Wake Alarm Device Expired Timer: AC + DCET, 32, // Wake Alarm Device Expired Timer: DC + // + // AdvancedFeaturesEnd + // + Offset(R_PMC_PWRM_CFG4), + , 31, + CECE, 1, // PS_ON# de-assertion during SleepS0 enable + Offset(R_PMC_PWRM_1B1C), + , 22, + XSQD, 1, // 24MHz Crystal Shutdown Qualification Disable (XTALSDQDIS) + Offset(R_PMC_PWRM_1BD0), + , 31, + CPPM, 1, // BIT31 : 1 = PMC allows stalling of the backbone, 0 = PMC does not allow stalling of the backbone + Offset(R_PMC_PWRM_ST_PG_FDIS_PMC_1), + GBED, 1, // GBE_FDIS_PMC + Offset(R_PMC_PWRM_NST_PG_FDIS_1), + , 22, + SCFD, 1, // ST_FDIS_PMC (SATA) + } + + // + // CPPM Forced Alignment Enable (CPPMFAEN): + // 1 = PMC allows stalling of the backbone, enabling the CWB and blocking the DMI transmit arbiter and preventing CPU wakes (via PM_SYNC messages) when PCH idle (FAIDLEWAIT and FACSMEPGQDIS) and CPU is in the memory closed state. It ceases the stall when the maximum wake time point is met. + // 0 = PMC does not allow stalling of the backbone or enabling the CWB and blocking the DMI transmit arbiter. + // + Method(CFAE, 1, NotSerialized) { + If(DerefOf(Index(Arg0, 0))) { + //ADBG("CPPM Forced Alignment Disable") + Store(0, CPPM) + Return(Buffer() {0}) + } Else { + //ADBG("CPPM Forced Alignment Enable") + Store(1, CPPM) + Return(Buffer() {0}) + } + } + + // + // Is MODPHY power gating supported + // Checks if MODPHY power gating is supported on given SKU + // + // @retval 0 MODPHY power gating is not supported + // @retval 1 MODPHY power gating is supported + // + Method (IMPS) { + //If (LEqual (PCHS, PCH_S)) { + // Return(0) + //} Else { + Return(1) + //} + } +} -- To view, visit https://review.coreboot.org/c/coreboot/+/43600 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ica28d6437a19f3e828b2320965866aba7f883898 Gerrit-Change-Number: 43600 Gerrit-PatchSet: 1 Gerrit-Owner: Shreesh Chhabbi <shreesh.chhabbi(a)intel.com> Gerrit-Reviewer: Shreesh Chhabbi <shreesh.chhabbi(a)intel.corp-partner.google.com> Gerrit-MessageType: newchange

5 13

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit June 2021