SeaBIOS (version rel-1.9.0-43-g76327b9)
BUILD: gcc: (coreboot toolchain v1.33 November 25th, 2015) 5.2.0 binutils: (GNU Binutils) 2.25
SeaBIOS (version rel-1.9.0-43-g76327b9)
BUILD: gcc: (coreboot toolchain v1.33 November 25th, 2015) 5.2.0 binutils: (GNU Binutils) 2.25
Found coreboot cbmem console @ dffde000
Found mainboard PC Engines APU1
Relocating init from 0x000e4220 to 0xdfc0b400 (size 47968)
Found CBFS header at 0xffe00138
multiboot: eax=0, ebx=0
Found 27 PCI devices (max PCI bus is 05)
Copying SMBIOS entry point from 0xdfc5f000 to 0x000f70a0
Copying ACPI RSDP from 0xdfc70000 to 0x000f7070
Copying MPTABLE from 0xdfc94000/dfc94010 to 0x000f6e90
Copying PIR from 0xdfc95000 to 0x000f6e60
Using pmtimer, ioport 0x808
WARNING - Timeout at tis_wait_sts:107!
Scan for VGA option rom
EHCI init on dev 00:12.2 (regs=0xf7f04020)
WARNING - Timeout at i8042_flush:71!
EHCI init on dev 00:13.2 (regs=0xf7f05020)
Found 1 lpt ports
Found 2 serial ports
AHCI controller at 11.0, iobase f7f03000, irq 11
EHCI init on dev 00:16.2 (regs=0xf7f06020)
OHCI init on dev 00:12.0 (regs=0xf7f00000)
Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0
OHCI init on dev 00:13.0 (regs=0xf7f01000)
AHCI/0: registering: "AHCI/0: SB mSATA SSD ATA-10 Hard-Disk (14318 MiBytes)"
OHCI init on dev 00:16.0 (regs=0xf7f02000)
Searching bootorder for: /pci@i0cf8/*@11/drive@1/disk@0
AHCI/1: registering: "AHCI/1: Corsair CSSD-F40GB2-A ATA-8 Hard-Disk (38164 MiBytes)"
Searching bootorder for: /pci@i0cf8/usb@16,2/storage@1/*@0/*@0,0
Searching bootorder for: /pci@i0cf8/usb@16,2/usb-*@1
USB MSC vendor='Multiple' product='Card  Reader' rev='1.00' type=0 removable=1
Device reports MEDIUM NOT PRESENT
scsi_is_ready returned -1
Unable to configure USB MSC drive.
Unable to configure USB MSC device.
Searching bootorder for: /pci@i0cf8/usb@12,2/storage@5/*@0/*@0,0
Searching bootorder for: /pci@i0cf8/usb@12,2/usb-*@5
USB MSC vendor='WD' product='Elements 10B8' rev='1012' type=0 removable=0
Wcall16 with invalid stack