April 2020 - SeaBIOS - mail.coreboot.org

Quick Boot: A Guide for Embedded Firmware Developers, 2nd Edition
by Ivan Ivanov April 10, 2020

April 10, 2020

Finally we found this great rare book after many hours of searching, and would like to share it with you friends. Hope you would find it interesting. Enjoy! https://github.com/informer2016/Quick_Boot-_A_Guide_for_Embedded_Firmware_D… Wish you all the best, and thank you so much for your kind help

1 0

[PATCH 0/9] virtio-mmio support and acpi dsdt parser
by Gerd Hoffmann April 8, 2020

April 8, 2020

Hi, This series adds virtio-mmio support and an acpi dsdt parser (for device discovery) to seabios. This series with some additional debug patches on top can also be found at https://git.kraxel.org/cgit/seabios/log/?h=microvm Gerd Hoffmann (9): virtio-mmio: device registry virtio-mmio: device probing and initialization. virtio-mmio: add support to vp_*() functions virtio-mmio: add support for scsi devices. virtio-mmio: add support for block devices. acpi: add xsdt support acpi: add dsdt parser acpi: skip kbd init if not present acpi: find and register virtio-mmio devices Makefile | 2 +- src/hw/virtio-blk.h | 1 + src/hw/virtio-mmio.h | 78 +++++ src/hw/virtio-pci.h | 1 + src/hw/virtio-scsi.h | 1 + src/std/acpi.h | 11 + src/util.h | 13 + src/block.c | 2 + src/boot.c | 19 ++ src/fw/biostables.c | 662 ++++++++++++++++++++++++++++++++++++++++++- src/hw/ps2port.c | 4 + src/hw/virtio-blk.c | 71 +++++ src/hw/virtio-mmio.c | 101 +++++++ src/hw/virtio-pci.c | 68 ++++- src/hw/virtio-scsi.c | 73 ++++- src/post.c | 4 + src/Kconfig | 7 + 17 files changed, 1085 insertions(+), 33 deletions(-) create mode 100644 src/hw/virtio-mmio.h create mode 100644 src/hw/virtio-mmio.c -- 2.18.2

2 16

[PATCH v2 0/9] virtio-mmio support and acpi dsdt parser
by Gerd Hoffmann April 8, 2020

April 8, 2020

Hi, This series adds virtio-mmio support and an acpi dsdt parser (for device discovery) to seabios. v2: * various acpi parser tweaks. * move parser to separate src file. * reorganize virtio-mmio probing a bit. take care, Gerd Gerd Hoffmann (9): virtio-mmio: device probing and initialization. virtio-mmio: add support to vp_*() functions virtio-mmio: add support for scsi devices. virtio-mmio: add support for block devices. virtio-mmio: print device type acpi: add xsdt support acpi: add dsdt parser acpi: skip kbd init if not present acpi: find and register virtio-mmio devices Makefile | 4 +- src/hw/virtio-blk.h | 1 + src/hw/virtio-mmio.h | 77 +++++ src/hw/virtio-pci.h | 1 + src/hw/virtio-scsi.h | 1 + src/std/acpi.h | 11 + src/util.h | 13 + src/boot.c | 19 ++ src/fw/biostables.c | 49 +++- src/fw/dsdt_parser.c | 666 +++++++++++++++++++++++++++++++++++++++++++ src/fw/paravirt.c | 7 +- src/hw/ps2port.c | 4 + src/hw/virtio-blk.c | 71 +++++ src/hw/virtio-mmio.c | 97 +++++++ src/hw/virtio-pci.c | 68 ++++- src/hw/virtio-scsi.c | 73 ++++- src/Kconfig | 7 + 17 files changed, 1133 insertions(+), 36 deletions(-) create mode 100644 src/hw/virtio-mmio.h create mode 100644 src/fw/dsdt_parser.c create mode 100644 src/hw/virtio-mmio.c -- 2.18.2

1 9

[PATCH 0/4] Make seabios linkable with lld
by Fangrui Song April 6, 2020

April 6, 2020

This patch series make seabios linkable with lld. This is beneficial for FreeBSD ports as well https://svnweb.freebsd.org/ports/head/misc/seabios/Makefile as they can drop an LLD_UNSAFE As a maintainer of lld ELF, I have triaged numerous pieces of software. seabios is the only one making use of This drops the only instance https://sourceware.org/bugzilla/show_bug.cgi?id=12726 1, 2 and 3 are really independent and can be applied in arbitrary order. 4 depends on 3. I originally combined 3 and 4 and that was why I don't think a patch series made sense. Fangrui Song (4): Make rom16.o linkable with lld Makefile: Change ET_EXEC to ET_REL so that lld can link bios.bin.elf romlayout32flag.lds: Use `. +=` instead of `. =` test-build.sh: Delete unneeded LD capability test Makefile | 4 ++++ scripts/layoutrom.py | 11 ++++++++++- scripts/test-build.sh | 42 +----------------------------------------- src/romlayout.S | 2 +- 4 files changed, 16 insertions(+), 43 deletions(-) -- 2.26.0.rc2.310.g2932bb562d-goog

2 13

[PATCH v2] Use readelf -WSrs instead of objdump -thr so that llvm-readelf can be used as a replacement
by Fangrui Song April 6, 2020

April 6, 2020

objdump -h relies heavily on BFD internals and the BFD flags are difficult to emulate in llvm-objdump. llvm-objdump -h has a different output (https://reviews.llvm.org/D57146) Switch to readelf, which is generally better than objdump when dumping ELF section/symbol information. Signed-off-by: Fangrui Song <maskray(a)google.com> --- Makefile | 18 +++--- scripts/checkrom.py | 2 +- scripts/layoutrom.py | 143 ++++++++++++++++++++----------------------- 3 files changed, 78 insertions(+), 85 deletions(-) -- Changes v1->v2 * Deleted unrelated debug lines diff --git a/Makefile b/Makefile index 118dec0..c56d4b7 100644 --- a/Makefile +++ b/Makefile @@ -20,7 +20,7 @@ endif AS=$(CROSS_PREFIX)as LD=$(CROSS_PREFIX)ld OBJCOPY=$(CROSS_PREFIX)objcopy -OBJDUMP=$(CROSS_PREFIX)objdump +READELF=$(CROSS_PREFIX)readelf STRIP=$(CROSS_PREFIX)strip PYTHON=python CPP=cpp @@ -161,14 +161,14 @@ $(OUT)romlayout.o: src/romlayout.S $(OUT)autoconf.h $(OUT)asm-offsets.h $(OUT)romlayout16.lds: $(OUT)ccode32flat.o $(OUT)code32seg.o $(OUT)ccode16.o $(OUT)romlayout.o src/version.c scripts/layoutrom.py scripts/buildversion.py @echo " Building ld scripts" - $(Q)$(PYTHON) ./scripts/buildversion.py -e "$(EXTRAVERSION)" -t "$(CC);$(AS);$(LD);$(OBJCOPY);$(OBJDUMP);$(STRIP)" $(OUT)autoversion.h + $(Q)$(PYTHON) ./scripts/buildversion.py -e "$(EXTRAVERSION)" -t "$(CC);$(AS);$(LD);$(OBJCOPY);$(READELF);$(STRIP)" $(OUT)autoversion.h $(Q)$(CC) $(CFLAGS32FLAT) -c src/version.c -o $(OUT)version.o $(Q)$(LD) $(LD32BIT_FLAG) -r $(OUT)ccode32flat.o $(OUT)version.o -o $(OUT)code32flat.o $(Q)$(LD) $(LD32BIT_FLAG) -r $(OUT)ccode16.o $(OUT)romlayout.o -o $(OUT)code16.o - $(Q)$(OBJDUMP) -thr $(OUT)code32flat.o > $(OUT)code32flat.o.objdump - $(Q)$(OBJDUMP) -thr $(OUT)code32seg.o > $(OUT)code32seg.o.objdump - $(Q)$(OBJDUMP) -thr $(OUT)code16.o > $(OUT)code16.o.objdump - $(Q)$(PYTHON) ./scripts/layoutrom.py $(OUT)code16.o.objdump $(OUT)code32seg.o.objdump $(OUT)code32flat.o.objdump $(OUT)$(KCONFIG_AUTOHEADER) $(OUT)romlayout16.lds $(OUT)romlayout32seg.lds $(OUT)romlayout32flat.lds + $(Q)$(READELF) -WSrs $(OUT)code32flat.o > $(OUT)code32flat.o.readelf + $(Q)$(READELF) -WSrs $(OUT)code32seg.o > $(OUT)code32seg.o.readelf + $(Q)$(READELF) -WSrs $(OUT)code16.o > $(OUT)code16.o.readelf + $(Q)$(PYTHON) ./scripts/layoutrom.py $(OUT)code16.o.readelf $(OUT)code32seg.o.readelf $(OUT)code32flat.o.readelf $(OUT)$(KCONFIG_AUTOHEADER) $(OUT)romlayout16.lds $(OUT)romlayout32seg.lds $(OUT)romlayout32flat.lds # These are actually built by scripts/layoutrom.py above, but by pulling them # into an extra rule we prevent make -j from spawning layoutrom.py 4 times. @@ -193,9 +193,9 @@ $(OUT)rom.o: $(OUT)rom16.strip.o $(OUT)rom32seg.strip.o $(OUT)code32flat.o $(OUT $(OUT)bios.bin.prep: $(OUT)rom.o scripts/checkrom.py @echo " Prepping $@" $(Q)rm -f $(OUT)bios.bin $(OUT)Csm16.bin $(OUT)bios.bin.elf - $(Q)$(OBJDUMP) -thr $< > $<.objdump + $(Q)$(READELF) -WSrs $< > $<.readelf $(Q)$(OBJCOPY) -O binary $< $(OUT)bios.bin.raw - $(Q)$(PYTHON) ./scripts/checkrom.py $<.objdump $(CONFIG_ROM_SIZE) $(OUT)bios.bin.raw $(OUT)bios.bin.prep + $(Q)$(PYTHON) ./scripts/checkrom.py $<.readelf $(CONFIG_ROM_SIZE) $(OUT)bios.bin.raw $(OUT)bios.bin.prep $(OUT)bios.bin: $(OUT)bios.bin.prep @echo " Creating $@" @@ -237,7 +237,7 @@ $(OUT)vgaentry.o: vgasrc/vgaentry.S $(OUT)autoconf.h $(OUT)asm-offsets.h $(OUT)vgarom.o: $(OUT)vgaccode16.o $(OUT)vgaentry.o $(OUT)vgasrc/vgalayout.lds vgasrc/vgaversion.c scripts/buildversion.py @echo " Linking $@" - $(Q)$(PYTHON) ./scripts/buildversion.py -e "$(EXTRAVERSION)" -t "$(CC);$(AS);$(LD);$(OBJCOPY);$(OBJDUMP);$(STRIP)" $(OUT)autovgaversion.h + $(Q)$(PYTHON) ./scripts/buildversion.py -e "$(EXTRAVERSION)" -t "$(CC);$(AS);$(LD);$(OBJCOPY);$(READELF);$(STRIP)" $(OUT)autovgaversion.h $(Q)$(CC) $(CFLAGS16) -c vgasrc/vgaversion.c -o $(OUT)vgaversion.o $(Q)$(LD) --gc-sections -T $(OUT)vgasrc/vgalayout.lds $(OUT)vgaccode16.o $(OUT)vgaentry.o $(OUT)vgaversion.o -o $@ diff --git a/scripts/checkrom.py b/scripts/checkrom.py index aced5e2..721444d 100755 --- a/scripts/checkrom.py +++ b/scripts/checkrom.py @@ -23,7 +23,7 @@ def main(): # Read in symbols objinfofile = open(objinfo, 'r') - symbols = layoutrom.parseObjDump(objinfofile, 'in')[1] + symbols = layoutrom.parseReadElf(objinfofile, 'in')[1] # Read in raw file f = open(rawfile, 'rb') diff --git a/scripts/layoutrom.py b/scripts/layoutrom.py index 94d4412..350800e 100755 --- a/scripts/layoutrom.py +++ b/scripts/layoutrom.py @@ -544,87 +544,80 @@ class Reloc: class Symbol: name = offset = section = None -# Read in output from objdump -def parseObjDump(file, fileid): +def parseReadElf(file, fileid): # sections = [section, ...] sections = [] sectionmap = {} # symbols[symbolname] = symbol symbols = {} + lines = file.readlines() - state = None - for line in file.readlines(): - line = line.rstrip() - if line == 'Sections:': - state = 'section' - continue - if line == 'SYMBOL TABLE:': - state = 'symbol' - continue - if line.startswith('RELOCATION RECORDS FOR ['): - sectionname = line[24:-2] - if sectionname.startswith('.debug_'): - # Skip debugging sections (to reduce parsing time) - state = None - continue - state = 'reloc' - relocsection = sectionmap[sectionname] - continue + i = 0 + while not lines[i].startswith('Section Headers'): + i += 1 + i += 3 # Skip [Nr] and [ 0] + while ']' in lines[i]: + parts = lines[i][lines[i].find(']')+1:].split() + if len(parts) == 10: + name, _, _, _, size, _, _, _, _, align = parts + else: # not SHF_ALLOC + name, _, _, _, size, _, _, _, align = parts + section = Section() + section.name = name + section.size = int(size, 16) + section.align = int(align) + section.fileid = fileid + section.relocs = [] + sections.append(section) + sectionmap[name] = section + i += 1 - if state == 'section': - try: - idx, name, size, vma, lma, fileoff, align = line.split() - if align[:3] != '2**': - continue - section = Section() - section.name = name - section.size = int(size, 16) - section.align = 2**int(align[3:]) - section.fileid = fileid - section.relocs = [] - sections.append(section) - sectionmap[name] = section - except ValueError: - pass + while not lines[i].startswith('Symbol table '): + i += 1 + i += 3 # Skip Num: and 0: + while i < len(lines) and ':' in lines[i]: + colon = lines[i].find(':') + parts = lines[i].split() + try: + ndx = int(parts[6]) + name = sections[ndx-1].name + except ValueError: # ABS or UND + ndx = 0 + name = '' + if parts[3] != 'SECTION': + name = parts[7] + symbol = Symbol() + symbol.size = int(parts[2]) + symbol.offset = int(parts[1], 16) + symbol.name = name + symbol.section = sections[ndx-1] if ndx > 0 else None + symbols[name] = symbol + i += 1 + + i = 0 + while i < len(lines): + if not lines[i].startswith('Relocation section'): + i += 1 continue - if state == 'symbol': - try: - parts = line[17:].split() - if len(parts) == 3: - sectionname, size, name = parts - elif len(parts) == 4 and parts[2] == '.hidden': - sectionname, size, hidden, name = parts - else: - continue - symbol = Symbol() - symbol.size = int(size, 16) - symbol.offset = int(line[:8], 16) - symbol.name = name - symbol.section = sectionmap.get(sectionname) - symbols[name] = symbol - except ValueError: - pass + rel_name = lines[i][20:lines[i].index("'", 20)] + i += 2 + if rel_name.startswith('.rel.debug_'): + # Skip debugging sections (to reduce parsing time) continue - if state == 'reloc': - try: - off, type, symbolname = line.split() - reloc = Reloc() - reloc.offset = int(off, 16) - reloc.type = type - reloc.symbolname = symbolname - reloc.symbol = symbols.get(symbolname) - if reloc.symbol is None: - # Some binutils (2.20.1) give section name instead - # of a symbol - create a dummy symbol. - reloc.symbol = symbol = Symbol() - symbol.size = 0 - symbol.offset = 0 - symbol.name = symbolname - symbol.section = sectionmap.get(symbolname) - symbols[symbolname] = symbol - relocsection.relocs.append(reloc) - except ValueError: - pass + assert rel_name.startswith('.rel') + relocated = sectionmap[rel_name[4:]] + while lines[i][0].isalnum(): + line = lines[i] + off, _, typ, _, symbolname = line.split() + reloc = Reloc() + reloc.offset = int(off, 16) + reloc.type = typ + reloc.symbolname = symbolname + reloc.symbol = symbols.get(symbolname) + assert reloc.symbol is not None + relocated.relocs.append(reloc) + i += 1 + return sections, symbols # Parser for constants in simple C header files. @@ -653,9 +646,9 @@ def main(): infile32flat = open(in32flat, 'r') # infoX = (sections, symbols) - info16 = parseObjDump(infile16, '16') - info32seg = parseObjDump(infile32seg, '32seg') - info32flat = parseObjDump(infile32flat, '32flat') + info16 = parseReadElf(infile16, '16') + info32seg = parseReadElf(infile32seg, '32seg') + info32flat = parseReadElf(infile32flat, '32flat') # Read kconfig config file config = scanconfig(cfgfile) -- 2.26.0.rc2.310.g2932bb562d-goog

2 2

Custom-sized, large floppy images?
by Rafael Send April 3, 2020

April 3, 2020

Hi, I'm working on stuffing a bootable Linux distro into coreboot. In QEMU I already succeded by using coreboot's built-in kernel loading mechanism, but that's without SeaBIOS. I'd love to have it as a SeaBIOS payload so I can also boot other things, but I guess I'd have to create a custom-sized floppy image for this or figure out how to create an ELF payload out of a Linux kernel (I'm open to either, but I wasn't able to find any documentation on the ELF method). The guy who put Win 3.1 in coreboot attempted the floppy method, but according to his article he did not find success with this method due to unknown and complex issues in the floppy-side logic of SeaBIOS. So, I'm making the question explicit: What would it take to support custom-sized floppy images? In particular, I'm thinking of a 16MB device... Alternatively, would it be possible to create an ELF file out of a Linux kernel+initrd / bootable image? Cheers, Rafael

4 28

[PATCH 0/6] Add virtio-mmio support
by Gerd Hoffmann April 3, 2020

April 3, 2020

qemu got a new "microvm" machine type which has no pci support. virtio-mmio is used for devices instead. This series adds support for virtio-mmio devices to seabios to allow booting from block and scsi devices. Gerd Hoffmann (6): string: add strtol() implementation paravirt/qemu: virtio-mmio device discovery virtio-mmio: device probing and initialization. virtio-mmio: add support to vp_*() functions virtio-mmio: add support for scsi devices. virtio-mmio: add support for block devices. Makefile | 2 +- src/hw/virtio-blk.h | 1 + src/hw/virtio-mmio.h | 77 +++++++++++++++++++++++++++++++++++++++++ src/hw/virtio-pci.h | 1 + src/hw/virtio-scsi.h | 1 + src/string.h | 1 + src/util.h | 2 ++ src/block.c | 2 ++ src/boot.c | 19 +++++++++++ src/fw/paravirt.c | 24 +++++++++++++ src/hw/virtio-blk.c | 71 ++++++++++++++++++++++++++++++++++++++ src/hw/virtio-mmio.c | 81 ++++++++++++++++++++++++++++++++++++++++++++ src/hw/virtio-pci.c | 68 +++++++++++++++++++++++++++++++------ src/hw/virtio-scsi.c | 73 +++++++++++++++++++++++++++++++++------ src/string.c | 25 ++++++++++++++ 15 files changed, 425 insertions(+), 23 deletions(-) create mode 100644 src/hw/virtio-mmio.h create mode 100644 src/hw/virtio-mmio.c -- 2.18.2

3 17