September 2017 - SeaBIOS - mail.coreboot.org

Time for a seabios 1.11 release?
by Gerd Hoffmann Oct. 27, 2017

Oct. 27, 2017

Hi, Quite a few changes accumulated in master. Time to plan a new release I think, so we can pick up the improvements in qemu 2.11. Comments? Anything pending for qemu which needs firmware support? cheers, Gerd

2 3

GCC 7.1 warning in `tcgbios.c`: `'hleo.eventnumber' may be used uninitialized in this function`
by Paul Menzel Oct. 12, 2017

Oct. 12, 2017

Dear SeaBIOS folks, GCC 7.1 warns about a maybe uninitialized struct member. ``` src/tcgbios.c: In function 'tpm_interrupt_handler32': src/tcgbios.c:1232:30: warning: 'hleo.eventnumber' may be used uninitialized in this function [-Wmaybe-uninitialized] hleeo->eventnumber = hleo.eventnumber; ~~~~^~~~~~~~~~~~ Compiling whole program out/ccode32flat.o In file included from out/ccode32flat.o.tmp.c:52:0: ./src/tcgbios.c: In function 'tpm_interrupt_handler32': ./src/tcgbios.c:1232:30: warning: 'hleo.eventnumber' may be used uninitialized in this function [-Wmaybe-uninitialized] hleeo->eventnumber = hleo.eventnumber; ~~~~^~~~~~~~~~~~ ``` It looks valid, as in the beginning the struct hleo is only declared. ``` 1189 struct hleo hleo; ``` Kind regards, Paul

4 6

[PATCH v3 0/6] add serial console support
by Gerd Hoffmann Oct. 3, 2017

Oct. 3, 2017

This patch series adds serial console support to seabios. Patches 1-4 add some bits the serial console patch depends on. Patch 5 adds the actual serial console support, for both primary display mode and splitmode (running in parallel to a vga display). The recommended way to activate the serial console is "qemu -machine graphics=no". Patch 6 is just for testing convenience and will not be merged. It makes the seabios serial console a drop-in replacement for sgabios, i.e. it is possible to activate it using "qemu -device sga". Gerd Hoffmann (6): std: add cp437 to unicode map kbd: make enqueue_key public, add ascii_to_keycode romfile: add support for constant files. paravirt: serial console configuration. add serial console support [hack] ignore sgabios, enable sercon instead Makefile | 3 +- src/config.h | 1 - src/cp437.h | 1 + src/romfile.h | 2 + src/util.h | 6 + src/clock.c | 1 + src/cp437.c | 275 ++++++++++++++++++++++ src/fw/paravirt.c | 8 + src/kbd.c | 18 +- src/misc.c | 8 - src/optionroms.c | 16 +- src/post.c | 2 + src/romfile.c | 46 ++++ src/sercon.c | 673 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ src/Kconfig | 5 + src/romlayout.S | 50 +++- 16 files changed, 1097 insertions(+), 18 deletions(-) create mode 100644 src/cp437.h create mode 100644 src/cp437.c create mode 100644 src/sercon.c -- 2.9.3

3 15

Build failed in Jenkins: seabios #269
by Jenkins Build Host Sept. 27, 2017

Sept. 27, 2017

See <http://jenkins.xeni.kraxel.org:8080/job/seabios/269/display/redirect?page=c…> Changes: [kevin] boot: Rename drive_g to drive [kevin] disk: Don't require the 'struct drive_s' to be in the f-segment [kevin] block: Rename disk_op_s->drive_gf to drive_fl [kevin] virtio: Allocate drive_s storage in low memory ------------------------------------------ [...truncated 4.89 KB...] Bootmenu (BOOTMENU) [Y/n/?] (NEW) Graphical boot splash screen (BOOTSPLASH) [N/y/?] n Boot ordering (BOOTORDER) [Y/n/?] (NEW) Use internal stack for 16bit interrupt entry points (ENTRY_EXTRASTACK) [Y/n/?] (NEW) Allocate memory that needs to be in first Meg above 0xc0000 (MALLOC_UPPERMEMORY) [Y/n/?] (NEW) ROM size (in KB) (ROM_SIZE) [128] 128 * * Hardware support * ATA controllers (ATA) [Y/n/?] (NEW) ATA DMA (ATA_DMA) [N/y/?] (NEW) ATA 32bit PIO (ATA_PIO32) [N/y/?] (NEW) AHCI controllers (AHCI) [Y/n/?] (NEW) SD controllers (SDCARD) [N/y/?] n virtio-blk controllers (VIRTIO_BLK) [Y/n/?] (NEW) virtio-scsi controllers (VIRTIO_SCSI) [Y/n/?] (NEW) PVSCSI controllers (PVSCSI) [Y/n/?] (NEW) AMD PCscsi controllers (ESP_SCSI) [Y/n/?] (NEW) lsi53c895a scsi controllers (LSI_SCSI) [Y/n/?] (NEW) LSI MegaRAID SAS controllers (MEGASAS) [Y/n/?] (NEW) LSI MPT Fusion controllers (MPT_SCSI) [N/y/?] n Floppy controller (FLOPPY) [Y/n/?] (NEW) Floppy images from CBFS or fw_cfg (FLASH_FLOPPY) [Y/n/?] (NEW) NVMe controllers (NVME) [Y/n/?] (NEW) PS/2 port (PS2PORT) [Y/n/?] (NEW) USB (USB) [Y/n/?] (NEW) USB UHCI controllers (USB_UHCI) [Y/n/?] (NEW) USB OHCI controllers (USB_OHCI) [N/y/?] n USB EHCI controllers (USB_EHCI) [Y/n/?] (NEW) USB XHCI controllers (USB_XHCI) [N/y/?] n USB drives (USB_MSC) [Y/n/?] (NEW) UAS drives (USB_UAS) [N/y/?] n USB hubs (USB_HUB) [Y/n/?] (NEW) USB keyboards (USB_KEYBOARD) [Y/n/?] (NEW) USB mice (USB_MOUSE) [Y/n/?] (NEW) Serial port (SERIAL) [Y/n/?] (NEW) Serial console (SERCON) [Y/n/?] (NEW) Parallel port (LPT) [Y/n/?] (NEW) Real Time Clock (RTC) scheduling (RTC_TIMER) [Y/n/?] (NEW) Hardware interrupts (HARDWARE_IRQ) [Y/n/?] (NEW) System Management Mode (SMM) (USE_SMM) [Y/n/?] (NEW) Initialize MTRRs (MTRR_INIT) [Y/n/?] (NEW) Support ACPI timer (PMTIMER) [Y/n/?] (NEW) Support CPU timestamp counter as timer (TSC_TIMER) [Y/n/?] (NEW) * * BIOS interfaces * Drive interface (DRIVES) [Y/n/?] (NEW) DVD/CDROM booting (CDROM_BOOT) [Y/n/?] (NEW) DVD/CDROM boot drive emulation (CDROM_EMU) [Y/n/?] (NEW) PCIBIOS interface (PCIBIOS) [Y/n/?] (NEW) APM interface (APMBIOS) [Y/n/?] (NEW) PnP BIOS interface (PNPBIOS) [Y/n/?] (NEW) Option ROMS (OPTIONROMS) [Y/n/?] (NEW) PMM interface (PMM) [Y/n/?] (NEW) Boot interface (BOOT) [Y/n/?] (NEW) Keyboard interface (KEYBOARD) [Y/n/?] (NEW) Keyboard hook interface (KBD_CALL_INT15_4F) [Y/n/?] (NEW) Mouse interface (MOUSE) [Y/n/?] (NEW) S3 resume (S3_RESUME) [Y/n/?] (NEW) Hardware specific VGA helpers (VGAHOOKS) [Y/n/?] (NEW) Disable A20 (DISABLE_A20) [N/y/?] (NEW) Make unused UMB memory read/writeable. (WRITABLE_UPPERMEMORY) [N/y/?] (NEW) TPM support and TCG BIOS extensions (TCGBIOS) [N/y/?] n * * BIOS Tables * PIR table (PIRTABLE) [Y/n/?] (NEW) MPTable (MPTABLE) [Y/n/?] (NEW) SMBIOS (SMBIOS) [Y/n/?] (NEW) ACPI (ACPI) [Y/n/?] (NEW) Include default ACPI DSDT (ACPI_DSDT) [Y/n/?] (NEW) Load BIOS tables from ROM files (FW_ROMFILE_LOAD) [Y/n/?] (NEW) * * VGA ROM * VGA Hardware Type > 1. None (NO_VGABIOS) (NEW) 2. QEMU/Bochs Original IBM 256K VGA (VGA_STANDARD_VGA) (NEW) 3. QEMU/Bochs Cirrus SVGA (VGA_CIRRUS) (NEW) 4. QEMU/Bochs VBE SVGA (VGA_BOCHS) (NEW) 5. GeodeGX2 (VGA_GEODEGX2) (NEW) 6. GeodeLX (VGA_GEODELX) (NEW) choice[1-6]: * * Debugging * Debug level (DEBUG_LEVEL) [1] (NEW) Serial port debugging (DEBUG_SERIAL) [N/y/?] (NEW) Serial port debugging via memory mapped IO (DEBUG_SERIAL_MMIO) [N/y/?] (NEW) Special IO port debugging (DEBUG_IO) [Y/n/?] (NEW) # # configuration written to <http://jenkins.xeni.kraxel.org:8080/job/seabios/ws/rpmbuild/rpm/BUILD/seabi…> # + rm -f src/fw/acpi-dsdt.hex src/fw/ssdt-misc.hex src/fw/ssdt-pcihp.hex src/fw/ssdt-proc.hex + make EXTRAVERSION=-70.b269.gf3d2a15-git-snapshot-by-kraxel.org iasl Compiling IASL src/fw/acpi-dsdt.hex out/src/fw/acpi-dsdt.dsl.i 405: Method(CPEJ, 2, NotSerialized) { Remark 2146 - Method Argument is never used ^ (Arg0) out/src/fw/acpi-dsdt.dsl.i 405: Method(CPEJ, 2, NotSerialized) { Remark 2146 - Method Argument is never used ^ (Arg1) ASL Input: out/src/fw/acpi-dsdt.dsl.i - 475 lines, 19153 bytes, 315 keywords AML Output: out/src/fw/acpi-dsdt.aml - 4489 bytes, 159 named objects, 156 executable opcodes Listing File: out/src/fw/acpi-dsdt.lst - 144485 bytes Hex Dump: out/src/fw/acpi-dsdt.hex - 42473 bytes Compilation complete. 0 Errors, 0 Warnings, 2 Remarks, 246 Optimizations Compiling IASL src/fw/ssdt-proc.hex ASL Input: out/src/fw/ssdt-proc.dsl.i - 36 lines, 762 bytes, 8 keywords AML Output: out/src/fw/ssdt-proc.aml - 162 bytes, 6 named objects, 2 executable opcodes Listing File: out/src/fw/ssdt-proc.lst - 3101 bytes Hex Dump: out/src/fw/ssdt-proc.hex - 1896 bytes Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 0 Optimizations Compiling IASL src/fw/ssdt-pcihp.hex ASL Input: out/src/fw/ssdt-pcihp.dsl.i - 37 lines, 758 bytes, 5 keywords AML Output: out/src/fw/ssdt-pcihp.aml - 121 bytes, 5 named objects, 0 executable opcodes Listing File: out/src/fw/ssdt-pcihp.lst - 2664 bytes Hex Dump: out/src/fw/ssdt-pcihp.hex - 1522 bytes Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 0 Optimizations Compiling IASL src/fw/ssdt-misc.hex ASL Input: out/src/fw/ssdt-misc.dsl.i - 102 lines, 2567 bytes, 35 keywords AML Output: out/src/fw/ssdt-misc.aml - 388 bytes, 24 named objects, 11 executable opcodes Listing File: out/src/fw/ssdt-misc.lst - 7930 bytes Hex Dump: out/src/fw/ssdt-misc.hex - 3997 bytes Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 2 Optimizations + make EXTRAVERSION=-70.b269.gf3d2a15-git-snapshot-by-kraxel.org Build Kconfig config file Compile checking out/src/misc.o Compile checking out/src/stacks.o Compile checking out/src/output.o Compile checking out/src/string.o Compile checking out/src/block.o Compile checking out/src/cdrom.o Compile checking out/src/disk.o Compile checking out/src/mouse.o Compile checking out/src/kbd.o Compile checking out/src/system.o Compile checking out/src/serial.o Compile checking out/src/sercon.o Compile checking out/src/clock.o Compile checking out/src/resume.o Compile checking out/src/pnpbios.o Compile checking out/src/vgahooks.o Compile checking out/src/pcibios.o Compile checking out/src/apm.o Compile checking out/src/cp437.o Compile checking out/src/hw/pci.o Compile checking out/src/hw/timer.o Compile checking out/src/hw/rtc.o Compile checking out/src/hw/dma.o Compile checking out/src/hw/pic.o Compile checking out/src/hw/ps2port.o Compile checking out/src/hw/serialio.o Compile checking out/src/hw/usb.o Compile checking out/src/hw/usb-uhci.o Compile checking out/src/hw/usb-ohci.o Compile checking out/src/hw/usb-ehci.o Compile checking out/src/hw/usb-hid.o Compile checking out/src/hw/usb-msc.o Compile checking out/src/hw/usb-uas.o Compile checking out/src/hw/blockcmd.o Compile checking out/src/hw/floppy.o Compile checking out/src/hw/ata.o Compile checking out/src/hw/ramdisk.o Compile checking out/src/hw/lsi-scsi.o Compile checking out/src/hw/esp-scsi.o Compile checking out/src/hw/megasas.o Compile checking out/src/hw/mpt-scsi.o Compile checking out/src/post.o Compile checking out/src/e820map.o Compile checking out/src/malloc.o Compile checking out/src/romfile.o Compile checking out/src/x86.o Compile checking out/src/optionroms.o Compile checking out/src/pmm.o Compile checking out/src/font.o Compile checking out/src/boot.o Compile checking out/src/bootsplash.o Compile checking out/src/jpeg.o Compile checking out/src/bmp.o Compile checking out/src/tcgbios.o Compile checking out/src/sha1.o Compile checking out/src/hw/pcidevice.o Compile checking out/src/hw/ahci.o Compile checking out/src/hw/pvscsi.o Compile checking out/src/hw/usb-xhci.o Compile checking out/src/hw/usb-hub.o Compile checking out/src/hw/sdcard.o Compile checking out/src/fw/coreboot.o Compile checking out/src/fw/lzmadecode.o Compile checking out/src/fw/multiboot.o Compile checking out/src/fw/csm.o Compile checking out/src/fw/biostables.o Compile checking out/src/fw/paravirt.o Compile checking out/src/fw/shadow.o Compile checking out/src/fw/pciinit.o Compile checking out/src/fw/smm.o Compile checking out/src/fw/smp.o Compile checking out/src/fw/mtrr.o Compile checking out/src/fw/xen.o Compile checking out/src/fw/acpi.o Compile checking out/src/fw/mptable.o Compile checking out/src/fw/pirtable.o Compile checking out/src/fw/smbios.o Compile checking out/src/fw/romfile_loader.o Compile checking out/src/hw/virtio-ring.o Compile checking out/src/hw/virtio-pci.o Compile checking out/src/hw/virtio-blk.o Compile checking out/src/hw/virtio-scsi.o Compile checking out/src/hw/tpm_drivers.o Compile checking out/src/hw/nvme.o Compiling whole program out/ccode32flat.o Compiling whole program out/code32seg.o Compiling whole program out/ccode16.o Compiling to assembler out/src/asm-offsets.s Generating offset file out/asm-offsets.h Compiling (16bit) out/romlayout.o Building ld scripts Version: 1.10.0-70.b269.gf3d2a15-git-snapshot-by-kraxel.org Fixed space: 0xe05b-0x10000 total: 8101 slack: 13 Percent slack: 0.2% 16bit size: 36728 32bit segmented size: 2127 32bit flat size: 27705 32bit flat init size: 62768 Lowmem size: 2208 f-segment var size: 1200 Linking out/rom16.o Stripping out/rom16.strip.o Linking out/rom32seg.o Stripping out/rom32seg.strip.o Linking out/rom.o Prepping out/bios.bin.prep Error! ROM doesn't fit (137040 > 131072) You have to either increase the size (CONFIG_ROM_SIZE) or turn off some features (such as hardware support not needed) to make it fit. Trying a more recent gcc version might work too. make: *** [out/bios.bin.prep] Error 1 error: Bad exit status from /var/tmp/rpm-tmp.vqVe8Q (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.vqVe8Q (%build) Build step 'Execute shell' marked build as failure Archiving artifacts

1 0

[PATCH 0/4] Avoid using f-segment memory for virtio
by Kevin O'Connor Sept. 27, 2017

Sept. 27, 2017

This series updates the generic code so that either "low" memory or the f-segment can be used for storing drive mapping information. It also updates the virtio code to use "low" memory for its allocations. I think there is a good chance this series will, in practice, avoid running out of memory when a large number of virtio drives are available. There are other ways to tackle this problem (eg, more of the virtio storage could be moved into "high" memory), but I think this approach has the benefit of avoiding a "big bang" patch series. Comments welcome. -Kevin Kevin O'Connor (4): boot: Rename drive_g to drive disk: Don't require the 'struct drive_s' to be in the f-segment block: Rename disk_op_s->drive_gf to drive_fl virtio: Allocate drive_s storage in low memory src/block.c | 36 ++++----- src/block.h | 2 +- src/boot.c | 16 ++-- src/cdrom.c | 6 +- src/disk.c | 218 +++++++++++++++++++++++++-------------------------- src/hw/ahci.c | 4 +- src/hw/ata.c | 26 +++--- src/hw/blockcmd.c | 10 +-- src/hw/esp-scsi.c | 2 +- src/hw/floppy.c | 20 ++--- src/hw/lsi-scsi.c | 2 +- src/hw/megasas.c | 2 +- src/hw/mpt-scsi.c | 2 +- src/hw/nvme.c | 2 +- src/hw/pvscsi.c | 2 +- src/hw/ramdisk.c | 2 +- src/hw/sdcard.c | 2 +- src/hw/usb-msc.c | 4 +- src/hw/usb-uas.c | 2 +- src/hw/virtio-blk.c | 14 ++-- src/hw/virtio-ring.c | 1 - src/hw/virtio-scsi.c | 5 +- 22 files changed, 189 insertions(+), 191 deletions(-) -- 2.9.4

2 9

[PATCH 0/2] scsi: fixes and improvements to bus scan
by Paolo Bonzini Sept. 27, 2017

Sept. 27, 2017

The first patch fixes a regression where many disks on a single SCSI target could prevent LUN0 from booting on another target. The second patch then exploits the new scanning algorithm to speed up the bus scan on virtio-scsi, which has a higher limit for the target than the other adaptors and therefore was slowed down the most. Paolo Bonzini (2): scsi: ensure LUN0 is added first virtio-scsi: speed up SCSI bus scan src/hw/blockcmd.c | 6 ++++-- src/hw/esp-scsi.c | 10 ++++++++-- src/hw/lsi-scsi.c | 10 ++++++++-- src/hw/mpt-scsi.c | 10 ++++++++-- src/hw/usb-uas.c | 1 + src/hw/virtio-scsi.c | 46 ++++++++++++++++++++++++++++++++++++++-------- 6 files changed, 67 insertions(+), 16 deletions(-) -- 2.13.0

3 16

Build failed in Jenkins: seabios #268
by Jenkins Build Host Sept. 22, 2017

Sept. 22, 2017

See <http://jenkins.xeni.kraxel.org:8080/job/seabios/268/display/redirect?page=c…> Changes: [kevin] std: add cp437 to unicode map [kevin] kbd: make enqueue_key public, add ascii_to_keycode [kevin] romfile: add support for constant files. [kevin] paravirt: serial console configuration. [kevin] add serial console support ------------------------------------------ [...truncated 4.87 KB...] Bootmenu (BOOTMENU) [Y/n/?] (NEW) Graphical boot splash screen (BOOTSPLASH) [N/y/?] n Boot ordering (BOOTORDER) [Y/n/?] (NEW) Use internal stack for 16bit interrupt entry points (ENTRY_EXTRASTACK) [Y/n/?] (NEW) Allocate memory that needs to be in first Meg above 0xc0000 (MALLOC_UPPERMEMORY) [Y/n/?] (NEW) ROM size (in KB) (ROM_SIZE) [128] 128 * * Hardware support * ATA controllers (ATA) [Y/n/?] (NEW) ATA DMA (ATA_DMA) [N/y/?] (NEW) ATA 32bit PIO (ATA_PIO32) [N/y/?] (NEW) AHCI controllers (AHCI) [Y/n/?] (NEW) SD controllers (SDCARD) [N/y/?] n virtio-blk controllers (VIRTIO_BLK) [Y/n/?] (NEW) virtio-scsi controllers (VIRTIO_SCSI) [Y/n/?] (NEW) PVSCSI controllers (PVSCSI) [Y/n/?] (NEW) AMD PCscsi controllers (ESP_SCSI) [Y/n/?] (NEW) lsi53c895a scsi controllers (LSI_SCSI) [Y/n/?] (NEW) LSI MegaRAID SAS controllers (MEGASAS) [Y/n/?] (NEW) LSI MPT Fusion controllers (MPT_SCSI) [N/y/?] n Floppy controller (FLOPPY) [Y/n/?] (NEW) Floppy images from CBFS or fw_cfg (FLASH_FLOPPY) [Y/n/?] (NEW) NVMe controllers (NVME) [Y/n/?] (NEW) PS/2 port (PS2PORT) [Y/n/?] (NEW) USB (USB) [Y/n/?] (NEW) USB UHCI controllers (USB_UHCI) [Y/n/?] (NEW) USB OHCI controllers (USB_OHCI) [N/y/?] n USB EHCI controllers (USB_EHCI) [Y/n/?] (NEW) USB XHCI controllers (USB_XHCI) [N/y/?] n USB drives (USB_MSC) [Y/n/?] (NEW) UAS drives (USB_UAS) [N/y/?] n USB hubs (USB_HUB) [Y/n/?] (NEW) USB keyboards (USB_KEYBOARD) [Y/n/?] (NEW) USB mice (USB_MOUSE) [Y/n/?] (NEW) Serial port (SERIAL) [Y/n/?] (NEW) Serial console (SERCON) [Y/n/?] (NEW) Parallel port (LPT) [Y/n/?] (NEW) Real Time Clock (RTC) scheduling (RTC_TIMER) [Y/n/?] (NEW) Hardware interrupts (HARDWARE_IRQ) [Y/n/?] (NEW) System Management Mode (SMM) (USE_SMM) [Y/n/?] (NEW) Initialize MTRRs (MTRR_INIT) [Y/n/?] (NEW) Support ACPI timer (PMTIMER) [Y/n/?] (NEW) Support CPU timestamp counter as timer (TSC_TIMER) [Y/n/?] (NEW) * * BIOS interfaces * Drive interface (DRIVES) [Y/n/?] (NEW) DVD/CDROM booting (CDROM_BOOT) [Y/n/?] (NEW) DVD/CDROM boot drive emulation (CDROM_EMU) [Y/n/?] (NEW) PCIBIOS interface (PCIBIOS) [Y/n/?] (NEW) APM interface (APMBIOS) [Y/n/?] (NEW) PnP BIOS interface (PNPBIOS) [Y/n/?] (NEW) Option ROMS (OPTIONROMS) [Y/n/?] (NEW) PMM interface (PMM) [Y/n/?] (NEW) Boot interface (BOOT) [Y/n/?] (NEW) Keyboard interface (KEYBOARD) [Y/n/?] (NEW) Keyboard hook interface (KBD_CALL_INT15_4F) [Y/n/?] (NEW) Mouse interface (MOUSE) [Y/n/?] (NEW) S3 resume (S3_RESUME) [Y/n/?] (NEW) Hardware specific VGA helpers (VGAHOOKS) [Y/n/?] (NEW) Disable A20 (DISABLE_A20) [N/y/?] (NEW) Make unused UMB memory read/writeable. (WRITABLE_UPPERMEMORY) [N/y/?] (NEW) TPM support and TCG BIOS extensions (TCGBIOS) [N/y/?] n * * BIOS Tables * PIR table (PIRTABLE) [Y/n/?] (NEW) MPTable (MPTABLE) [Y/n/?] (NEW) SMBIOS (SMBIOS) [Y/n/?] (NEW) ACPI (ACPI) [Y/n/?] (NEW) Include default ACPI DSDT (ACPI_DSDT) [Y/n/?] (NEW) Load BIOS tables from ROM files (FW_ROMFILE_LOAD) [Y/n/?] (NEW) * * VGA ROM * VGA Hardware Type > 1. None (NO_VGABIOS) (NEW) 2. QEMU/Bochs Original IBM 256K VGA (VGA_STANDARD_VGA) (NEW) 3. QEMU/Bochs Cirrus SVGA (VGA_CIRRUS) (NEW) 4. QEMU/Bochs VBE SVGA (VGA_BOCHS) (NEW) 5. GeodeGX2 (VGA_GEODEGX2) (NEW) 6. GeodeLX (VGA_GEODELX) (NEW) choice[1-6]: * * Debugging * Debug level (DEBUG_LEVEL) [1] (NEW) Serial port debugging (DEBUG_SERIAL) [N/y/?] (NEW) Serial port debugging via memory mapped IO (DEBUG_SERIAL_MMIO) [N/y/?] (NEW) Special IO port debugging (DEBUG_IO) [Y/n/?] (NEW) # # configuration written to <http://jenkins.xeni.kraxel.org:8080/job/seabios/ws/rpmbuild/rpm/BUILD/seabi…> # + rm -f src/fw/acpi-dsdt.hex src/fw/ssdt-misc.hex src/fw/ssdt-pcihp.hex src/fw/ssdt-proc.hex + make EXTRAVERSION=-66.b268.gd6728f3-git-snapshot-by-kraxel.org iasl Compiling IASL src/fw/acpi-dsdt.hex out/src/fw/acpi-dsdt.dsl.i 405: Method(CPEJ, 2, NotSerialized) { Remark 2146 - Method Argument is never used ^ (Arg0) out/src/fw/acpi-dsdt.dsl.i 405: Method(CPEJ, 2, NotSerialized) { Remark 2146 - Method Argument is never used ^ (Arg1) ASL Input: out/src/fw/acpi-dsdt.dsl.i - 475 lines, 19153 bytes, 315 keywords AML Output: out/src/fw/acpi-dsdt.aml - 4489 bytes, 159 named objects, 156 executable opcodes Listing File: out/src/fw/acpi-dsdt.lst - 144485 bytes Hex Dump: out/src/fw/acpi-dsdt.hex - 42473 bytes Compilation complete. 0 Errors, 0 Warnings, 2 Remarks, 246 Optimizations Compiling IASL src/fw/ssdt-proc.hex ASL Input: out/src/fw/ssdt-proc.dsl.i - 36 lines, 762 bytes, 8 keywords AML Output: out/src/fw/ssdt-proc.aml - 162 bytes, 6 named objects, 2 executable opcodes Listing File: out/src/fw/ssdt-proc.lst - 3101 bytes Hex Dump: out/src/fw/ssdt-proc.hex - 1896 bytes Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 0 Optimizations Compiling IASL src/fw/ssdt-pcihp.hex ASL Input: out/src/fw/ssdt-pcihp.dsl.i - 37 lines, 758 bytes, 5 keywords AML Output: out/src/fw/ssdt-pcihp.aml - 121 bytes, 5 named objects, 0 executable opcodes Listing File: out/src/fw/ssdt-pcihp.lst - 2664 bytes Hex Dump: out/src/fw/ssdt-pcihp.hex - 1522 bytes Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 0 Optimizations Compiling IASL src/fw/ssdt-misc.hex ASL Input: out/src/fw/ssdt-misc.dsl.i - 102 lines, 2567 bytes, 35 keywords AML Output: out/src/fw/ssdt-misc.aml - 388 bytes, 24 named objects, 11 executable opcodes Listing File: out/src/fw/ssdt-misc.lst - 7930 bytes Hex Dump: out/src/fw/ssdt-misc.hex - 3997 bytes Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 2 Optimizations + make EXTRAVERSION=-66.b268.gd6728f3-git-snapshot-by-kraxel.org Build Kconfig config file Compile checking out/src/misc.o Compile checking out/src/stacks.o Compile checking out/src/output.o Compile checking out/src/string.o Compile checking out/src/block.o Compile checking out/src/cdrom.o Compile checking out/src/disk.o Compile checking out/src/mouse.o Compile checking out/src/kbd.o Compile checking out/src/system.o Compile checking out/src/serial.o Compile checking out/src/sercon.o Compile checking out/src/clock.o Compile checking out/src/resume.o Compile checking out/src/pnpbios.o Compile checking out/src/vgahooks.o Compile checking out/src/pcibios.o Compile checking out/src/apm.o Compile checking out/src/cp437.o Compile checking out/src/hw/pci.o Compile checking out/src/hw/timer.o Compile checking out/src/hw/rtc.o Compile checking out/src/hw/dma.o Compile checking out/src/hw/pic.o Compile checking out/src/hw/ps2port.o Compile checking out/src/hw/serialio.o Compile checking out/src/hw/usb.o Compile checking out/src/hw/usb-uhci.o Compile checking out/src/hw/usb-ohci.o Compile checking out/src/hw/usb-ehci.o Compile checking out/src/hw/usb-hid.o Compile checking out/src/hw/usb-msc.o Compile checking out/src/hw/usb-uas.o Compile checking out/src/hw/blockcmd.o Compile checking out/src/hw/floppy.o Compile checking out/src/hw/ata.o Compile checking out/src/hw/ramdisk.o Compile checking out/src/hw/lsi-scsi.o Compile checking out/src/hw/esp-scsi.o Compile checking out/src/hw/megasas.o Compile checking out/src/hw/mpt-scsi.o Compile checking out/src/post.o Compile checking out/src/e820map.o Compile checking out/src/malloc.o Compile checking out/src/romfile.o Compile checking out/src/x86.o Compile checking out/src/optionroms.o Compile checking out/src/pmm.o Compile checking out/src/font.o Compile checking out/src/boot.o Compile checking out/src/bootsplash.o Compile checking out/src/jpeg.o Compile checking out/src/bmp.o Compile checking out/src/tcgbios.o Compile checking out/src/sha1.o Compile checking out/src/hw/pcidevice.o Compile checking out/src/hw/ahci.o Compile checking out/src/hw/pvscsi.o Compile checking out/src/hw/usb-xhci.o Compile checking out/src/hw/usb-hub.o Compile checking out/src/hw/sdcard.o Compile checking out/src/fw/coreboot.o Compile checking out/src/fw/lzmadecode.o Compile checking out/src/fw/multiboot.o Compile checking out/src/fw/csm.o Compile checking out/src/fw/biostables.o Compile checking out/src/fw/paravirt.o Compile checking out/src/fw/shadow.o Compile checking out/src/fw/pciinit.o Compile checking out/src/fw/smm.o Compile checking out/src/fw/smp.o Compile checking out/src/fw/mtrr.o Compile checking out/src/fw/xen.o Compile checking out/src/fw/acpi.o Compile checking out/src/fw/mptable.o Compile checking out/src/fw/pirtable.o Compile checking out/src/fw/smbios.o Compile checking out/src/fw/romfile_loader.o Compile checking out/src/hw/virtio-ring.o Compile checking out/src/hw/virtio-pci.o Compile checking out/src/hw/virtio-blk.o Compile checking out/src/hw/virtio-scsi.o Compile checking out/src/hw/tpm_drivers.o Compile checking out/src/hw/nvme.o Compiling whole program out/ccode32flat.o Compiling whole program out/code32seg.o Compiling whole program out/ccode16.o Compiling to assembler out/src/asm-offsets.s Generating offset file out/asm-offsets.h Compiling (16bit) out/romlayout.o Building ld scripts Version: 1.10.0-66.b268.gd6728f3-git-snapshot-by-kraxel.org Fixed space: 0xe05b-0x10000 total: 8101 slack: 10 Percent slack: 0.1% 16bit size: 36496 32bit segmented size: 2127 32bit flat size: 27713 32bit flat init size: 62768 Lowmem size: 2208 f-segment var size: 1200 Linking out/rom16.o Stripping out/rom16.strip.o Linking out/rom32seg.o Stripping out/rom32seg.strip.o Linking out/rom.o Prepping out/bios.bin.prep Error! ROM doesn't fit (136816 > 131072) You have to either increase the size (CONFIG_ROM_SIZE) or turn off some features (such as hardware support not needed) to make it fit. Trying a more recent gcc version might work too. make: *** [out/bios.bin.prep] Error 1 error: Bad exit status from /var/tmp/rpm-tmp.48ndqn (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.48ndqn (%build) Build step 'Execute shell' marked build as failure Archiving artifacts

1 0

Re: [SeaBIOS] [Qemu-devel] [PATCH v7 1/4] hw/pci: introduce pcie-pci-bridge device
by Eduardo Habkost Sept. 20, 2017

Sept. 20, 2017

On Wed, Sep 20, 2017 at 09:52:01AM +0000, Aleksandr Bezzubikov wrote: > ср, 20 сент. 2017 г. в 10:13, Marcel Apfelbaum <marcel(a)redhat.com>: > > > On 19/09/2017 23:34, Eduardo Habkost wrote: > > > On Fri, Aug 18, 2017 at 02:36:47AM +0300, Aleksandr Bezzubikov wrote: > > >> Introduce a new PCIExpress-to-PCI Bridge device, > > >> which is a hot-pluggable PCI Express device and > > >> supports devices hot-plug with SHPC. > > >> > > >> This device is intended to replace the DMI-to-PCI Bridge. > > >> > > >> Signed-off-by: Aleksandr Bezzubikov <zuban32s(a)gmail.com> > > >> Reviewed-by: Marcel Apfelbaum <marcel(a)redhat.com> > > > > > > It's possible to crash QEMU by instantiating this device, with; > > > > > > $ qemu-system-ppc64 -machine prep -device pcie-pci-bridge > > > qemu-system-ppc64: qemu/memory.c:1533: memory_region_finalize: > > Assertion `!mr->container' failed. > > > Aborted > > > > Hi Edurado, > > > > > > > > I didn't investigate the root cause. > > > > > > > Thanks for reporting it! > > Aleksandr, can you have a look? Maybe we should not compile > > the device for ppc arch. (x86 and arm is enough) > > > I will see what can we do. Is x86 and arm really enough? I would investigate the original cause before disabling the device on other architectures, as we could be hiding a bug that's also present in x86. The backtrace looks like broken error handling logic somewhere: #0 0x00007fffea9ff1f7 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56 #1 0x00007fffeaa008e8 in __GI_abort () at abort.c:90 #2 0x00007fffea9f8266 in __assert_fail_base (fmt=0x7fffeab4ae68 "%s%s%s:%u: %s%sAssertion `%s' failed.\n%n", assertion=assertion@entry=0x555555be4ac1 "!mr->container", file=file@entry=0x555555be49c4 "/root/qemu/memory.c", line=line@entry=1533, function=function@entry=0x555555be5100 <__PRETTY_FUNCTION__.28908> "memory_region_finalize") at assert.c:92 #3 0x00007fffea9f8312 in __GI___assert_fail (assertion=assertion@entry=0x555555be4ac1 "!mr->container", file=file@entry=0x555555be49c4 "/root/qemu/memory.c", line=line@entry=1533, function=function@entry=0x555555be5100 <__PRETTY_FUNCTION__.28908> "memory_region_finalize") at assert.c:101 #4 0x00005555557ff2df in memory_region_finalize (obj=<optimized out>) at /root/qemu/memory.c:1533 #5 0x0000555555ae77a2 in object_unref (type=<optimized out>, obj=0x555557c00d80) at /root/qemu/qom/object.c:453 #6 0x0000555555ae77a2 in object_unref (data=0x555557c00d80) at /root/qemu/qom/object.c:467 #7 0x0000555555ae77a2 in object_unref (obj=0x555557c00d80) at /root/qemu/qom/object.c:902 #8 0x0000555555ae67d7 in object_property_del_child (obj=0x555557ab6500, child=child@entry=0x555557c00d80, errp=0x0) at /root/qemu/qom/object.c:427 #9 0x0000555555ae6ff4 in object_unparent (obj=obj@entry=0x555557c00d80) at /root/qemu/qom/object.c:446 #10 0x0000555555a1c94e in shpc_free (d=d@entry=0x555557ab6500) at /root/qemu/hw/pci/shpc.c:676 #11 0x0000555555a12560 in pcie_pci_bridge_realize (d=0x555557ab6500, errp=0x7fffffffd530) at /root/qemu/hw/pci-bridge/pcie_pci_bridge.c:84 #12 0x0000555555a18d07 in pci_qdev_realize (qdev=0x555557ab6500, errp=0x7fffffffd5d0) at /root/qemu/hw/pci/pci.c:2024 #13 0x00005555559b53aa in device_set_realized (obj=<optimized out>, value=<optimized out>, errp=0x7fffffffd708) at /root/qemu/hw/core/qdev.c:914 #14 0x0000555555ae62fe in property_set_bool (obj=0x555557ab6500, v=<optimized out>, name=<optimized out>, opaque=0x555557ab7b30, errp=0x7fffffffd708) at /root/qemu/qom/object.c:1886 #15 0x0000555555aea3ef in object_property_set_qobject (obj=obj@entry=0x555557ab6500, value=value@entry=0x555557ab86b0, name=name@entry=0x555555c4f217 "realized", errp=errp@entry=0x7fffffffd708) at /root/qemu/qom/qom-qobject.c:27 #16 0x0000555555ae80a0 in object_property_set_bool (obj=0x555557ab6500, value=<optimized out>, name=0x555555c4f217 "realized", errp=0x7fffffffd708) at /root/qemu/qom/object.c:1162 #17 0x0000555555949824 in qdev_device_add (opts=0x5555567795b0, errp=errp@entry=0x7fffffffd7e0) at /root/qemu/qdev-monitor.c:630 #18 0x000055555594be87 in device_init_func (opaque=<optimized out>, opts=<optimized out>, errp=<optimized out>) at /root/qemu/vl.c:2418 #19 0x0000555555bc85ba in qemu_opts_foreach (list=<optimized out>, func=func@entry=0x55555594be60 <device_init_func>, opaque=opaque@entry=0x0, errp=errp@entry=0x0) at /root/qemu/util/qemu-option.c:1104 #20 0x000055555579f497 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at /root/qemu/vl.c:4745 (gdb) fr 11 #11 0x0000555555a12560 in pcie_pci_bridge_realize (d=0x555557ab6500, errp=0x7fffffffd530) at /root/qemu/hw/pci-bridge/pcie_pci_bridge.c:84 84 shpc_free(d); (gdb) l 79 pcie_aer_exit(d); 80 aer_error: 81 pm_error: 82 pcie_cap_exit(d); 83 cap_error: 84 shpc_free(d); 85 error: 86 pci_bridge_exitfn(d); 87 } 88 (gdb) -- Eduardo

3 2

Re: [SeaBIOS] [Qemu-devel] [PATCH v7 1/4] hw/pci: introduce pcie-pci-bridge device
by Marcel Apfelbaum Sept. 20, 2017

Sept. 20, 2017

On 20/09/2017 12:52, Aleksandr Bezzubikov wrote: > > ср, 20 сент. 2017 г. в 10:13, Marcel Apfelbaum <marcel(a)redhat.com > <mailto:marcel@redhat.com>>: > > On 19/09/2017 23:34, Eduardo Habkost wrote: > > On Fri, Aug 18, 2017 at 02:36:47AM +0300, Aleksandr Bezzubikov wrote: > >> Introduce a new PCIExpress-to-PCI Bridge device, > >> which is a hot-pluggable PCI Express device and > >> supports devices hot-plug with SHPC. > >> > >> This device is intended to replace the DMI-to-PCI Bridge. > >> > >> Signed-off-by: Aleksandr Bezzubikov <zuban32s(a)gmail.com > <mailto:zuban32s@gmail.com>> > >> Reviewed-by: Marcel Apfelbaum <marcel(a)redhat.com > <mailto:marcel@redhat.com>> > > > > It's possible to crash QEMU by instantiating this device, with; > > > > $ qemu-system-ppc64 -machine prep -device pcie-pci-bridge > > qemu-system-ppc64: qemu/memory.c:1533: memory_region_finalize: > Assertion `!mr->container' failed. > > Aborted > > Hi Edurado, > > > > > I didn't investigate the root cause. > > > > Thanks for reporting it! > Aleksandr, can you have a look? Maybe we should not compile > the device for ppc arch. (x86 and arm is enough) > > > I will see what can we do. Is x86 and arm really enough? > Well, I am being selfish, and it works for me lately :). Seriously speaking, the new generic PCI Express Port was restricted to x86 and arm for reasons I don't remember. Since your work has the same scope, the restriction makes sense. Please grep for CONFIG_PCIE_PORT to convince yourself and to help coding it. Thanks, Marcel > > > Appreciated, > Marcel > > -- > Aleksandr Bezzubikov

1 0

[PATCH v7 0/4] Generic PCIE-PCI Bridge
by Aleksandr Bezzubikov Sept. 20, 2017

Sept. 20, 2017

This series introduces a new device - Generic PCI Express to PCI bridge, and also makes all necessary changes to enable hotplug of the bridge itself and any device into the bridge. Changes v6->v7: Change IO/MEM/PREF reservation properties type to SIZE. Changes v5->v6: 1. Fix indentation in the cap creation function (addresses Marcel's comment) 2. Simplify capability pref_mem_* fields assignment (addresses Marcel's comment) 3. Documentation fixes: - fix mutually exclusive fields definition (addresses Laszlo's comment) - fix pcie-pci-bridge usage example (addresses Marcel's comment) Changes v4->v5: 1. Change PCIE-PCI Bridge license (addresses Marcel's comment) 2. The capability layout changes (adress Laszlo' comments): - separate pref_mem into pref_mem_32 and pref_mem_64 fields (SeaBIOS side has the same changes) - accordingly change the Generic Root Port's properties 3. Do not add the capability to the root port if no valid values are provided (adresses Michael's comment) 4. Rename the capability type to 'RESOURCE_RESERVE' (addresses Marcel's comment) 5. Remove shpc_present check function (addresses Marcel's comment) 6. Fix the 4th patch message (adresses Michael's comment) 7. Patch for SHPC enabling in _OSC method has been already merged Changes v3->v4: 1. PCIE-PCI Bridge device: "msi_enable"->"msi", "shpc"->"shpc_bar", remove local_err, make "msi" property OnOffAuto, shpc_present() is still here to avoid SHPC_VMSTATE refactoring (address Marcel's comments). 2. Change QEMU PCI capability layout (SeaBIOS side has the same changes): - change reservation fields types: bus_res - uint32_t, others - uint64_t - rename 'non_pref' and 'pref' fields - interpret -1 value as 'ignore' 3. Use parent_realize in Generic PCI Express Root Port properly. 4. Fix documentation: fully replace the DMI-PCI bridge references with the new PCIE-PCI bridge, "PCIE"->"PCI Express", small mistakes and typos - address Laszlo's and Marcel's comments. 5. Rename QEMU PCI cap creation fucntion - addresses Marcel's comment. Changes v2->v3: (0). 'do_not_use' capability field flag is still _not_ in here since we haven't come to consesus on it yet. 1. Merge commits 5 (bus_reserve property creation) and 6 (property usage) together - addresses Michael's comment. 2. Add 'bus_reserve' property and QEMU PCI capability only to Generic PCIE Root Port - addresses Michael's and Marcel's comments. 3. Change 'bus_reserve' property's default value to 0 - addresses Michael's comment. 4. Rename QEMU bridge-specific PCI capability creation function - addresses Michael's comment. 5. Init the whole QEMU PCI capability with zeroes - addresses Michael's and Laszlo's comments. 6. Change QEMU PCI capability layout (SeaBIOS side has the same changes) - add 'type' field to distinguish multiple RedHat-specific capabilities - addresses Michael's comment - do not mimiс PCI Config space register layout, but use mutually exclusive differently sized fields for IO and prefetchable memory limits - addresses Laszlo's comment 7. Correct error handling in PCIE-PCI bridge realize function. 8. Replace a '2' constant with PCI_CAP_FLAGS in the capability creation function - addresses Michael's comment. 9. Remove a comment on _OSC which isn't correct anymore - address Marcel's comment. 10. Add documentation for the Generic PCIE-PCI Bridge and QEMU PCI capability - addresses Michael's comment. Changes v1->v2: 1. Enable SHPC for the bridge. 2. Enable SHPC support for the Q35 machine (ACPI stuff). 3. Introduce PCI capability to help firmware on the system init. This allows the bridge to be hotpluggable. Now it's supported only for pcie-root-port. Now it's supposed to used with SeaBIOS only, look at the SeaBIOS corresponding series "Allow RedHat PCI bridges reserve more buses than necessary during init". Aleksandr Bezzubikov (4): hw/pci: introduce pcie-pci-bridge device hw/pci: introduce bridge-only vendor-specific capability to provide some hints to firmware hw/pci: add QEMU-specific PCI capability to the Generic PCI Express Root Port docs: update documentation considering PCIE-PCI bridge docs/pcie.txt | 49 +++++----- docs/pcie_pci_bridge.txt | 114 ++++++++++++++++++++++ hw/pci-bridge/Makefile.objs | 2 +- hw/pci-bridge/gen_pcie_root_port.c | 36 +++++++ hw/pci-bridge/pcie_pci_bridge.c | 192 +++++++++++++++++++++++++++++++++++++ hw/pci/pci_bridge.c | 46 +++++++++ include/hw/pci/pci.h | 1 + include/hw/pci/pci_bridge.h | 25 +++++ include/hw/pci/pcie_port.h | 1 + 9 files changed, 442 insertions(+), 24 deletions(-) create mode 100644 docs/pcie_pci_bridge.txt create mode 100644 hw/pci-bridge/pcie_pci_bridge.c -- 2.7.4

4 10