March 2015 - openfirmware - mail.coreboot.org

[commit] r3771 - cpu/arm/olpc/4.0
by repository service March 12, 2015

March 12, 2015

Author: quozl Date: Thu Mar 12 05:40:34 2015 New Revision: 3771 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3771 Log: Q7C05 Modified: cpu/arm/olpc/4.0/fw-version.fth Modified: cpu/arm/olpc/4.0/fw-version.fth ============================================================================== --- cpu/arm/olpc/4.0/fw-version.fth Tue Mar 10 09:14:49 2015 (r3770) +++ cpu/arm/olpc/4.0/fw-version.fth Thu Mar 12 05:40:34 2015 (r3771) @@ -1,7 +1,7 @@ \ The overall firmware revision macro: FW_PREFIX Q7 macro: FW_MAJOR C -macro: FW_MINOR 04 +macro: FW_MINOR 05 \ Create a 2-character build/fw-suffix file to personalize your test builds " fw-suffix" $file-exists? [if]

1 0

[commit] r3770 - cpu/arm/olpc/1.75
by repository service March 10, 2015

March 10, 2015

Author: quozl Date: Tue Mar 10 09:14:49 2015 New Revision: 3770 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3770 Log: Q4D37 Modified: cpu/arm/olpc/1.75/fw-version.fth Modified: cpu/arm/olpc/1.75/fw-version.fth ============================================================================== --- cpu/arm/olpc/1.75/fw-version.fth Mon Mar 9 08:45:23 2015 (r3769) +++ cpu/arm/olpc/1.75/fw-version.fth Tue Mar 10 09:14:49 2015 (r3770) @@ -1,7 +1,7 @@ \ The overall firmware revision macro: FW_PREFIX Q4 macro: FW_MAJOR D -macro: FW_MINOR 36 +macro: FW_MINOR 37 \ Create a 2-character build/fw-suffix file to personalize your test builds " fw-suffix" $file-exists? [if]

1 0

[commit] r3769 - dev/olpc
by repository service March 9, 2015

March 9, 2015

Author: quozl Date: Mon Mar 9 08:45:23 2015 New Revision: 3769 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3769 Log: OLPC XO - siv121d camera sensor support, #12861 Modified: dev/olpc/seti.fth Modified: dev/olpc/seti.fth ============================================================================== --- dev/olpc/seti.fth Fri Jan 30 03:34:25 2015 (r3768) +++ dev/olpc/seti.fth Mon Mar 9 08:45:23 2015 (r3769) @@ -288,7 +288,7 @@ then ; -\ SIV121C, not supported on XO-1.5, +\ SIV121C, SIV121D, not supported on XO-1.5, \ because sensor maximum clock 27 MHz, and host provides 48 MHz. [ifndef] olpc-xo-1.5 @@ -651,6 +651,37 @@ cb 12 ov! \ OUTFMT, RGB565 setting then ; + +: siv121d-config ( ycrcb? -- ) + >r ( r: ucrcb? ) + + 01 00 ov! \ BLK_SEL - block address bank selector - Timing Control Block + 02 03 ov! \ CNTR_A - Control global reset and device enable - + \ global reset, idle mode with clock disabled. + + 00 00 ov! \ BLK_SEL - block address bank selector - PMU block + 04 03 ov! \ CHIP_CNTR - Chip control - + \ enable output pads, disable software stand-by power-down mode. + + \ AE + 02 00 ov! \ BLK_SEL - block address bank selector - AE (automatic exposure) + 04 11 ov! \ MAX_SHUTSTEP + \ minimum exposure time when automatic exposure in use, reduce to increase frame rate at low light levels at the expense of image brightness + + \ IDP + 04 00 ov! \ BLK_SEL - block address bank selector - IDP + 1d 11 ov! \ SIGCNT - invert PCLK polarity + ( r: ycrcb? ) r> if ( ) + 25 12 ov! \ OUTFMT, YUV + else + 83 12 ov! \ OUTFMT, RGB565 setting + then + + \ Sensor On + 01 00 ov! \ BLK_SEL - block address bank selector - Control Block + 01 03 ov! \ CNTR_A - Control global reset and device enable - + \ no reset, dynamic mode with clock enabled +; [then] : (set-mirrored) ( mirrored? -- ) @@ -681,6 +712,16 @@ then ( regval ) [ifndef] olpc-xo-1.5 + dup h# de = if + " SETi,SIV121D" " sensor" string-property +[ifdef] set-sensor-properties + " seti,siv121d" camera-smb-slave set-sensor-properties +[then] + ['] siv121c-set-mirrored to set-mirrored + ['] siv121d-config to camera-config + drop true exit + then + dup h# 95 = if " SETi,SIV121C" " sensor" string-property [ifdef] set-sensor-properties

1 0