June 2000 - OpenBIOS - mail.coreboot.org

SMP Bootup
by James V Hendricks June 20, 2000

June 20, 2000

Here is what I get on SMP bootup.. It goes into an infinite loop at the end. I generated the default MP tables on my own. Any suggestions? - James Linux version 2.4.0-test1 (jimi@yellow) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #41 SMP Fri Jun 16 11:38:58 MDT 2000. BIOS-provided physical RAM map:. e820: 000000000009f000 @ 0000000000000000 (usable). e820: 0000000003e00000 @ 0000000000100000 (usable). James: Generating my own MP Floating Pointer table kmem_alloc: NULL ptr (name=unknown). On node 0 totalpages: 16128. zone(0): 4096 pages.. zone(1): 12032 pages.. zone(2): 0 pages.. Intel MultiProcessor Specification v1.4. Virtual Wire compatibility mode.. Default MP configuration #5. Processor #0 Pentium(tm) Pro APIC version 16. Floating point unit present.. Machine Exception supported.. 64 bit compare & exchange supported.. Processor #1 Pentium(tm) Pro APIC version 16. Floating point unit present.. Machine Exception supported.. 64 bit compare & exchange supported.. Bus #0 is ISA . Bus #1 is PCI . I/O APIC #2 Version 16 at 0xFEC00000.. Int: type 0, pol 0, trig 0, bus 0, IRQ 00, APIC ID 2, APIC INT 02. Int: type 0, pol 0, trig 0, bus 0, IRQ 01, APIC ID 2, APIC INT 01. Int: type 0, pol 0, trig 0, bus 0, IRQ 03, APIC ID 2, APIC INT 03. Int: type 0, pol 0, trig 0, bus 0, IRQ 04, APIC ID 2, APIC INT 04. Int: type 0, pol 0, trig 0, bus 0, IRQ 05, APIC ID 2, APIC INT 05. Int: type 0, pol 0, trig 0, bus 0, IRQ 06, APIC ID 2, APIC INT 06. Int: type 0, pol 0, trig 0, bus 0, IRQ 07, APIC ID 2, APIC INT 07. Int: type 0, pol 0, trig 0, bus 0, IRQ 08, APIC ID 2, APIC INT 08. Int: type 0, pol 0, trig 0, bus 0, IRQ 09, APIC ID 2, APIC INT 09. Int: type 0, pol 0, trig 0, bus 0, IRQ 0a, APIC ID 2, APIC INT 0a. Int: type 0, pol 0, trig 0, bus 0, IRQ 0b, APIC ID 2, APIC INT 0b. Int: type 0, pol 0, trig 0, bus 0, IRQ 0c, APIC ID 2, APIC INT 0c. Int: type 0, pol 0, trig 0, bus 0, IRQ 0d, APIC ID 2, APIC INT 0d. Int: type 0, pol 0, trig 0, bus 0, IRQ 0e, APIC ID 2, APIC INT 0e. Int: type 0, pol 0, trig 0, bus 0, IRQ 0f, APIC ID 2, APIC INT 0f. Int: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID 2, APIC INT 00. Lint: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 00. Lint: type 1, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 01. Processors: 2. James: a) 1 b) 3 c) 16 d) 16 e) fee00000. mapped APIC to ffffe000 (fee00000). mapped IOAPIC to ffffd000 (fec00000). Enabling extended fast FPU save and restore ... done.. Enabling KNI unmasked exception support ... done.. Kernel command line: root=/dev/hda1 ide0=reset. Initializing CPU#0. Detected 497438524 Hz processor.. Console: colour dummy device 80x25. Calibrating delay loop... 989.59 BogoMIPS. Memory: 61860k/64512k available (643k kernel code, 2264k reserved, 82k data, 180k init, 0k highmem). Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes). Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes). Page-cache hash table entries: 16384 (order: 4, 65536 bytes). kmem_create: Poisoning requested, but con given - bdev_cache. Inode-cache hash table entries: 4096 (order: 3, 32768 bytes). kmem_create: Poisoning requested, but con given - inode_cache. CPU serial number disabled.. Checking 386/387 coupling... OK, FPU using exception 16 error reporting.. Checking 'hlt' instruction... OK.. POSIX conformance testing by UNIFIX. mtrr: v1.36 (20000221) Richard Gooch (rgooch(a)atnf.csiro.au) CPU serial number disabled.. CPU0: Intel Pentium III (Katmai) stepping 03. per-CPU timeslice cutoff: 0.00 usecs.. weird, boot CPU (#15) not listed by the BIOS.. Getting VERSION: ffffffff. Getting VERSION: ffffffff. Getting LVT0: ffffffff. Getting LVT1: ffffffff. masked ExtINT on CPU#0. ESR value before enabling vector: ffffffff. ESR value after enabling vector: ffffffff. CPU present map: 8003. Booting processor 1/0 eip 2000. Setting warm reset code and vector.. 1.. 2.. 3.. Asserting INIT.. Waiting for send to finish.... + On Fri, 16 Jun 2000, Ronald G Minnich wrote: > on the SiS, 512Kb-64Kb. On the intel, well maybe that too. > > It's all driven by the damned NVRAM flasher program. > > what you at? > > cell: 505 699 0502, landline is 302 478 5291 except I'm using it for 10 > more minutes. > > ron > > > - To unsubscribe: send mail to majordomo(a)freiburg.linux.de with 'unsubscribe openbios' in the body of the message

4 6

Try again
by James V Hendricks June 16, 2000

June 16, 2000

These are the _real_ logbufs. Ignore the last one I sent. Any ideas? - James This is straight out of NVRAM; it halts early: >>>>>> Linux version 2.4.0-test1 (jimi@yellow) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #41 SMP Fri Jun 16 11:38:58 MDT 2000. BIOS-provided physical RAM map:. e820: 000000000009f000 @ 0000000000000000 (usable). e820: 0000000003e00000 @ 0000000000100000 (usable). James: Generating my own MP Floating Pointer table kmem_alloc: NULL ptr (name=unknown). On node 0 totalpages: 16128. zone(0): 4096 pages.. zone(1): 12032 pages.. zone(2): 0 pages.. Intel MultiProcessor Specification v1.4. Virtual Wire compatibility mode.. Default MP configuration #5. Processor #0 Pentium(tm) Pro APIC version 16. Floating point unit present.. Machine Exception supported.. 64 bit compare & exchange supported.. Processor #1 Pentium(tm) Pro APIC version 16. Floating point unit present.. Machine Exception supported.. 64 bit compare & exchange supported.. Bus #0 is ISA . Bus #1 is PCI . I/O APIC #2 Version 16 at 0xFEC00000.. Int: type 0, pol 0, trig 0, bus 0, IRQ 00, APIC ID 2, APIC INT 02. Int: type 0, pol 0, trig 0, bus 0, IRQ 01, APIC ID 2, APIC INT 01. Int: type 0, pol 0, trig 0, bus 0, IRQ 03, APIC ID 2, APIC INT 03. Int: type 0, pol 0, trig 0, bus 0, IRQ 04, APIC ID 2, APIC INT 04. Int: type 0, pol 0, trig 0, bus 0, IRQ 05, APIC ID 2, APIC INT 05. Int: type 0, pol 0, trig 0, bus 0, IRQ 06, APIC ID 2, APIC INT 06. Int: type 0, pol 0, trig 0, bus 0, IRQ 07, APIC ID 2, APIC INT 07. Int: type 0, pol 0, trig 0, bus 0, IRQ 08, APIC ID 2, APIC INT 08. Int: type 0, pol 0, trig 0, bus 0, IRQ 09, APIC ID 2, APIC INT 09. Int: type 0, pol 0, trig 0, bus 0, IRQ 0a, APIC ID 2, APIC INT 0a. Int: type 0, pol 0, trig 0, bus 0, IRQ 0b, APIC ID 2, APIC INT 0b. Int: type 0, pol 0, trig 0, bus 0, IRQ 0c, APIC ID 2, APIC INT 0c. Int: type 0, pol 0, trig 0, bus 0, IRQ 0d, APIC ID 2, APIC INT 0d. Int: type 0, pol 0, trig 0, bus 0, IRQ 0e, APIC ID 2, APIC INT 0e. Int: type 0, pol 0, trig 0, bus 0, IRQ 0f, APIC ID 2, APIC INT 0f. Int: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID 2, APIC INT 00. Lint: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 00. Lint: type 1, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 01. Processors: 2. James: a) 1 b) 3 c) 16 d) 16 e) fee00000. mapped APIC to ffffe000 (fee00000). mapped IOAPIC to ffffd000 (fec00000). Enabling extended fast FPU save and restore ... done.. Enabling KNI unmasked exception support ... done.. Kernel command line: root=/dev/hda1 ide0=reset. Initializing CPU#0. Detected 497445265 Hz processor.. Console: colour dummy device 80x25. Calibrating delay loop... 989.59 BogoMIPS. Memory: 61860k/64512k available (643k kernel code, 2264k reserved, 82k data, 180k init, 0k highmem). Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes). Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes). Page-cache hash table entries: 16384 (order: 4, 65536 bytes). kmem_create: Poisoning requested, but con given - bdev_cache. Inode-cache hash table entries: 4096 (order: 3, 32768 bytes). kmem_create: Poisoning requested, but con given - inode_cache. CPU serial number disabled.. Checking 386/387 coupling... OK, FPU using exception 16 error reporting.. Checking 'hlt' instruction... OK.. POSIX conformance testing by UNIFIX. mtrr: v1.36 (20000221) Richard Gooch (rgooch(a)atnf.csiro.au) CPU serial number disabled.. CPU0: Intel Pentium III (Katmai) stepping 03. per-CPU timeslice cutoff: 0.00 usecs.. weird, boot CPU (#15) not listed by the BIOS.. Getting VERSION: ffffffff. Getting VERSION: ffffffff. Getting LVT0: ffffffff. Getting LVT1: ffffffff. masked ExtINT on CPU#0. ESR value before enabling vector: ffffffff. ESR value after enabling vector: ffffffff. CPU present map: 8003. Booting processor 1/0 eip 2000. Setting warm reset code and vector.. 1.. 2.. 3.. Asserting INIT.. Waiting for send to finish.... ++++++++++++++++++++++++++ Deasserting INIT.. Waiting for send to finish.... ++++++++++++++++++++++++++ #startup loops: 2.. Sending STARTUP #1.. After apic_write.. Startup point 1.. Waiting for send to finish.... ++++++++++++++++++++++++++ After Startup.. APIC never delivered???. APIC delivery error (ef).. phys CPU #0 not responding - cannot use it.. Booting processor 1/1 eip 2000. Setting warm reset code and vector.. 1.. 2.. 3.. Asserting INIT.. Waiting for send to finish.... ++++++++++++++++++++++++++ Deasserting INIT.. Waiting for send to finish.... ++++++++++++++++++++++++++ #startup loops: 2.. Sending STARTUP #1.. After apic_write.. Startup point 1.. Waiting for send to finish.... ++++++++++++++++++++++++++ After Startup.. APIC never delivered???. APIC delivery error (ef).. phys CPU #1 not responding - cannot use it.. Before bogomips.. Error: only one processor found.. Boot done.. ENABLING IO-APIC IRQs. ...changing IO-APIC physical APIC ID to 2 ... Kernel panic: could not set ID!. . In idle task - not syncing This is after a BIOS boot via LILO. It works (up until the disk panic, but that is OK). >>>>>> Linux version 2.4.0-test1 (jimi@yellow) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #41 SMP Fri Jun 16 11:38:58 MDT 2000. BIOS-provided physical RAM map:. e820: 000000000009f800 @ 0000000000000000 (usable). e820: 0000000000000800 @ 000000000009f800 (reserved). e820: 0000000000018000 @ 00000000000e8000 (reserved). e820: 000000000fef0000 @ 0000000000100000 (usable). e820: 000000000000fc00 @ 000000000fff0000 (ACPI data). e820: 0000000000000400 @ 000000000ffffc00 (ACPI NVS). e820: 0000000000010000 @ 00000000fec00000 (reserved). e820: 0000000000001000 @ 00000000fee00000 (reserved). e820: 0000000000080000 @ 00000000fff80000 (reserved). James: Generating my own MP Floating Pointer table kmem_alloc: NULL ptr (name=unknown). On node 0 totalpages: 65520. zone(0): 4096 pages.. zone(1): 61424 pages.. zone(2): 0 pages.. Intel MultiProcessor Specification v1.4. Virtual Wire compatibility mode.. Default MP configuration #5. Processor #0 Pentium(tm) Pro APIC version 16. Floating point unit present.. Machine Exception supported.. 64 bit compare & exchange supported.. Internal APIC present.. Processor #1 Pentium(tm) Pro APIC version 16. Floating point unit present.. Machine Exception supported.. 64 bit compare & exchange supported.. Internal APIC present.. Bus #0 is ISA . Bus #1 is PCI . I/O APIC #2 Version 16 at 0xFEC00000.. Int: type 0, pol 0, trig 0, bus 0, IRQ 00, APIC ID 2, APIC INT 02. Int: type 0, pol 0, trig 0, bus 0, IRQ 01, APIC ID 2, APIC INT 01. Int: type 0, pol 0, trig 0, bus 0, IRQ 03, APIC ID 2, APIC INT 03. Int: type 0, pol 0, trig 0, bus 0, IRQ 04, APIC ID 2, APIC INT 04. Int: type 0, pol 0, trig 0, bus 0, IRQ 05, APIC ID 2, APIC INT 05. Int: type 0, pol 0, trig 0, bus 0, IRQ 06, APIC ID 2, APIC INT 06. Int: type 0, pol 0, trig 0, bus 0, IRQ 07, APIC ID 2, APIC INT 07. Int: type 0, pol 0, trig 0, bus 0, IRQ 08, APIC ID 2, APIC INT 08. Int: type 0, pol 0, trig 0, bus 0, IRQ 09, APIC ID 2, APIC INT 09. Int: type 0, pol 0, trig 0, bus 0, IRQ 0a, APIC ID 2, APIC INT 0a. Int: type 0, pol 0, trig 0, bus 0, IRQ 0b, APIC ID 2, APIC INT 0b. Int: type 0, pol 0, trig 0, bus 0, IRQ 0c, APIC ID 2, APIC INT 0c. Int: type 0, pol 0, trig 0, bus 0, IRQ 0d, APIC ID 2, APIC INT 0d. Int: type 0, pol 0, trig 0, bus 0, IRQ 0e, APIC ID 2, APIC INT 0e. Int: type 0, pol 0, trig 0, bus 0, IRQ 0f, APIC ID 2, APIC INT 0f. Int: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID 2, APIC INT 00. Lint: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 00. Lint: type 1, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 01. Processors: 2. James: a) 1 b) 3 c) 16 d) 16 e) fee00000. mapped APIC to ffffe000 (fee00000). mapped IOAPIC to ffffd000 (fec00000). Enabling extended fast FPU save and restore ... done.. Enabling KNI unmasked exception support ... done.. Kernel command line: BOOT_IMAGE=james ro root=301. Initializing CPU#0. Detected 497444516 Hz processor.. Console: colour dummy device 80x25. Calibrating delay loop... 992.87 BogoMIPS. Memory: 255944k/262080k available (643k kernel code, 5748k reserved, 82k data, 180k init, 0k highmem). Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes). Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes). Page-cache hash table entries: 65536 (order: 6, 262144 bytes). kmem_create: Poisoning requested, but con given - bdev_cache. Inode-cache hash table entries: 16384 (order: 5, 131072 bytes). kmem_create: Poisoning requested, but con given - inode_cache. CPU serial number disabled.. Checking 386/387 coupling... OK, FPU using exception 16 error reporting.. Checking 'hlt' instruction... OK.. POSIX conformance testing by UNIFIX. mtrr: v1.36 (20000221) Richard Gooch (rgooch(a)atnf.csiro.au) CPU serial number disabled.. CPU0: Intel Pentium III (Katmai) stepping 03. per-CPU timeslice cutoff: 1428.64 usecs.. Getting VERSION: 40011. Getting VERSION: 40011. Getting LVT0: 700. Getting LVT1: 400. enabled ExtINT on CPU#0. ESR value before enabling vector: 00000000. ESR value after enabling vector: 00000000. CPU present map: 3. Booting processor 1/0 eip 2000. Setting warm reset code and vector.. 1.. 2.. 3.. Asserting INIT.. Waiting for send to finish.... +Deasserting INIT.. Waiting for send to finish.... +#startup loops: 2.. Sending STARTUP #1.. After apic_write.. Startup point 1.. Waiting for send to finish.... Initializing CPU#1. +CPU#1 (phys ID: 0) waiting for CALLOUT. Sending STARTUP #2.. After apic_write.. Startup point 1.. Waiting for send to finish.... +After Startup.. Before Callout 1.. After Callout 1.. CALLIN, before setup_local_APIC().. masked ExtINT on CPU#1. ESR value before enabling vector: 00000000. ESR value after enabling vector: 00000000. Calibrating delay loop... 992.87 BogoMIPS. Stack at about c148dfbc. CPU serial number disabled.. OK.. CPU1: Intel Pentium III (Katmai) stepping 03. CPU has booted.. Before bogomips.. Total of 2 processors activated (1985.74 BogoMIPS).. Before bogocount - setting activated=1.. Boot done.. ENABLING IO-APIC IRQs. ...changing IO-APIC physical APIC ID to 2 ... ok.. Synchronizing Arb IDs.. init IO_APIC IRQs. IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.. ..TIMER: vector=49 pin1=2 pin2=0. activating NMI Watchdog ... done.. number of MP IRQ sources: 16.. number of IO-APIC #2 registers: 24.. testing the IO APIC........................ . IO APIC #2....... .... register #00: 02000000. ....... : physical APIC id: 02. .... register #01: 00170011. ....... : max redirection entries: 0017. ....... : IO APIC version: 0011. .... register #02: 00000000. ....... : arbitration: 00. .... IRQ redirection table:. NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: . 00 000 00 1 0 0 0 0 0 0 00. 01 003 03 0 0 0 0 0 1 1 39. 02 003 03 0 0 0 0 0 1 1 31. 03 003 03 0 0 0 0 0 1 1 41. 04 003 03 0 0 0 0 0 1 1 49. 05 003 03 0 0 0 0 0 1 1 51. 06 003 03 0 0 0 0 0 1 1 59. 07 003 03 0 0 0 0 0 1 1 61. 08 003 03 0 0 0 0 0 1 1 69. 09 003 03 0 0 0 0 0 1 1 71. 0a 003 03 0 0 0 0 0 1 1 79. 0b 003 03 0 0 0 0 0 1 1 81. 0c 003 03 0 0 0 0 0 1 1 89. 0d 000 00 1 0 0 0 0 0 0 00. 0e 003 03 0 0 0 0 0 1 1 91. 0f 003 03 0 0 0 0 0 1 1 99. 10 000 00 1 0 0 0 0 0 0 00. 11 000 00 1 0 0 0 0 0 0 00. 12 000 00 1 0 0 0 0 0 0 00. 13 000 00 1 0 0 0 0 0 0 00. 14 000 00 1 0 0 0 0 0 0 00. 15 000 00 1 0 0 0 0 0 0 00. 16 000 00 1 0 0 0 0 0 0 00. 17 000 00 1 0 0 0 0 0 0 00. IRQ to pin mappings:. IRQ0 -> 2. IRQ1 -> 1. IRQ3 -> 3. IRQ4 -> 4. IRQ5 -> 5. IRQ6 -> 6. IRQ7 -> 7. IRQ8 -> 8. IRQ9 -> 9. IRQ10 -> 10. IRQ11 -> 11. IRQ12 -> 12. IRQ13 -> 13. IRQ14 -> 14. IRQ15 -> 15. .................................... done.. calibrating APIC timer ... . ..... CPU clock speed is 497.4372 MHz.. ..... host bus clock speed is 99.4872 MHz.. cpu: 0, clocks: 994872, slice: 331624. CPU0<C0:994864,C:663232,D:8,S:331624,C:994872>. cpu: 1, clocks: 994872, slice: 331624. CPU1<C0:994864,C:331616,D:0,S:331624,C:994872>. checking TSC synchronization across CPUs: passed.. Setting commenced=1, go go go. PCI: Using configuration type 1. PCI: Probing PCI hardware. PCI: Discovered primary peer bus ff [IRQ]. PCI: Using IRQ router PIIX [8086/122e] at 00:12.0. Linux NET4.0 for Linux 2.3. Based upon Swansea University Computer Society NET3.039. kmem_create: Poisoning requested, but con given - skbuff_head_cache. Starting kswapd v1.6. VFS: Cannot open root device "301" or 03:01. Please append a correct "root=" boot option. Kernel panic: VFS: Unable to mount root fs on 03:01 - To unsubscribe: send mail to majordomo(a)freiburg.linux.de with 'unsubscribe openbios' in the body of the message

1 0

[Fwd: Information on TIARA project]
by Ollie Lho June 16, 2000

June 16, 2000

1 0

[Fwd: Information on TIARA project]
by Ollie Lho June 16, 2000

June 16, 2000

1 0

Project Status?
by Neil Padgett June 15, 2000

June 15, 2000

Where can I find information about the status of the project? I looked at the website, but I didn't see much there. Specifically, how far along is handling of FCODE? Thanks, Neil

1 0

Bye the way
by James Hendricks June 15, 2000

June 15, 2000

Any suggestions on SMP bootup would be appreciated; I think I can get it, but.. I believe I just have to setup arch/i386/smp.c correctly to go without a BIOS. - James - To unsubscribe: send mail to majordomo(a)freiburg.linux.de with 'unsubscribe openbios' in the body of the message

1 1

Yea, You did a GREAT job, Ronald
by Ollie Lho June 13, 2000

June 13, 2000

Ron, Today we can enter multiuser mode for the first time, thanks to your new kernel patch. The system boots so fast and works as fine as in the traditional BIOS way. One question, how is your current implementation to pass kernel parameter and PCI configuration ?? what are you plan to do to support any kernel without patch ? BTW, I am going to resume doing the devbios driver, hope we can flash the image without the programmer in the near furure. P.S. I will send you the romimage that works on our board. Ollie - To unsubscribe: send mail to majordomo(a)freiburg.linux.de with 'unsubscribe openbios' in the body of the message

1 0

Current Status in SiS Side
by Ollie Lho June 12, 2000

June 12, 2000

Ron, We can use matroxfb to boot linuxbios on SiS 630 to the point of patittion check. For cold boot, the kernel panic about unable to mount root file system. For warm reboot, the kernel Oops. Why ?? Does this exist on you side ?? I also tried to update the kernel, but it seems that the patch in CVS only works on 2.3.99pre5. Even 2.3.99pre6 fail to turn on the monitor, what's wrong ? Ollie - To unsubscribe: send mail to majordomo(a)freiburg.linux.de with 'unsubscribe openbios' in the body of the message

2 2

SMP Bootup
by James Hendricks June 12, 2000

June 12, 2000

> All the code I've seen requires that you build either an ACPI table or > an Intel MP 1.x table. I'll assume you meant APIC (Advanced Programmable Interrupt Controller) instead of ACPI. (Isn't that Advanced Computer Power Interface?) Or is ACPI something different? (too many acronyms) Looks like I have to build both APIC and Intel MP tables; I am not too excited about that. I guess I'll just printk() everything and hardwire everything in to start with. I don't even think I need to store the information where the bios would; I just need to assign variables. I have no idea how we are going to do autodetection.. I am working with kernel 2.4.0-test1; the only file I believe I need to edit is mpparse.c. Does this sound right to everybody? - James - To unsubscribe: send mail to majordomo(a)freiburg.linux.de with 'unsubscribe openbios' in the body of the message

3 2

[OT] modification of libraries
by Janusz Mlodzianowski June 11, 2000

June 11, 2000

Hi, Sorry this is slightly off topic. I need to modify standard Turbo C run time libraries made by tlib (cx.lib). All what I need is a change of standard segment names e.g CODE->MY_CODE and TEXT->MY_TEXT. Are there any free tools available? Alternatively, where can I find the information about internal format for Borland lib files? Thanks for any suggestions, janusz - To unsubscribe: send mail to majordomo(a)freiburg.linux.de with 'unsubscribe openbios' in the body of the message

2 1