Hello there, I have a Dell Inspiron 5559 Laptop which contains a Winbond 25Q128FVSQ Chip. I tried running flashrom natively on the laptop and got the usual EC warning so i stopped there. I then desoldered the SMD chip off the motherboard and hooked it up to a RPI and connected it through the SPI protocol. Flashrom then recognized it as a "Generic" flash chip and would not allow the data to be read as it was still unrecognized. Unfortunately I do not have any logs. I believe that this chip is on the list of supported hardware yet it was not recognized in flashrom. I am using the latest version as of April 18th 2018. Any suggestions or help would be appreciated. Thank You