December 2009 - flashrom - mail.coreboot.org

#1: flashRom doesn't work on MotherBoard with ICH9 + MP2532
by flashrom Oct. 26, 2010

Oct. 26, 2010

#1: flashRom doesn't work on MotherBoard with ICH9 + MP2532 --------------------------------------------------+------------------------- Reporter: annyvonne.le_coq@… | Owner: hailfinger Type: defect | Status: new Priority: major | Milestone: flashrom 0.9.1 Component: flashrom | Version: Keywords: | Dependencies: Patchstatus: there is no patch | --------------------------------------------------+------------------------- Hi all, I have a mother board equipped with ICH9 chipset and M25P32 flash device. I can't use flashrom to re-program my BIOS. 1) The ICH9 is not recognized. So, I add its device ID (2910) in chipset_enable.c file. 2) Then, M25P32 flash device is recognized, but OPCODE 06 is not in the list OPCODESS OS_ST_M25P. ich_spi_command try to find the command 06 in the list, The list contains only following values: 2, 3, 216, 5, 171, 1, 159, 199. The M25P32 has been tested with flashrom. So, I imagine that the problem is due to the caller. Have you got an idea about this issue. Thanks Anne -- Ticket URL: <http://www.flashrom.org/trac/flashrom/ticket/1> flashrom <http://www.flashrom.org/>

2 14

flashrom read works with ASUS P5B-V v0.9.1-r736
by Oliver Schnatz Sept. 4, 2010

Sept. 4, 2010

Hello! I tested flashrom reading with my motherboard. Currently I do not get a updated version for my board and I'm not brave enough to flash the current again. Thanks for your work on flashrom! Oliver (Germany) flashrom v0.9.1-r736 No coreboot table found. Found chipset "Intel ICH8/ICH8R", enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 Root Complex Register Block address = 0xfed1c000 GCS = 0xa0464: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 0x04: 0x6008 (HSFS) FLOCKDN 0, FDV 1, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0 0x50: 0x0000ffff (FRAP) BMWAG 0, BMRAG 0, BRWA 255, BRRA 255 0x54: 0x00000000 (FREG0) 0x58: 0x00ff0040 (FREG1) 0x5C: 0x003f0001 (FREG2) 0x60: 0x00000fff (FREG3) 0x64: 0x00000000 (FREG4) 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x007f1004 (SSFS, SSFC) 0x94: 0x0006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xB0: 0x00004000 (FDOC) Programming OPCODES... program_opcodes: preop=0006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: LPC,FWH,SPI. Calibrating delay loop... 434M loops per second, 100 myus = 190 us. OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ASD AE49F2008, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT25DF021, 256 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT25DF041A, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT25DF081, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT25DF161, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT25DF321, 4096 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT25DF641, 8192 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT25F512B, 64 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT25FS010, 128 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT25FS040, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT26DF041, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Chip status register is 00 Found chip "Atmel AT26DF081A" (1024 KB, SPI) at physical address 0xfff00000. Probing for Atmel AT26DF161, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT26F004, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT29C512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT45DB011D, 128 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT45DB021D, 256 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT45DB041D, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A25L40P, 512 KB: RDID returned 0x1f 0x45 0x01 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for AMIC A29002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Eon EN25B05, 64 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25B10, 128 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25B20, 256 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25B40, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25B80, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25B16, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25B32, 4096 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25B64, 8192 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25D16, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25F05, 64 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25F10, 128 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25F20, 256 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25F40, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25F80, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25F16, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25F32, 4096 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xc4, id2 0x9a Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX25L1005, 128 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX25L2005, 256 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX25L4005, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX25L8005, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX25L1605, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX25L3205, 4096 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX25L6405, 8192 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX25L12805, 16384 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Numonyx M25PE20, 256 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Numonyx M25PE40, 256 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Numonyx M25PE80, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Numonyx M25PE16, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for PMC Pm25LV010, 128 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for PMC Pm25LV020, 256 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for PMC Pm25LV040, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for PMC Pm25LV512, 64 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for PMC Pm29F0002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm29F0002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0x53, id2 0x69, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff Probing for Spansion S25FL016A, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for SST SST25VF016B, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for SST SST25VF032B, 4096 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for SST SST25VF040B, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for SST SST25VF040.REMS, 512 KB: REMS returned ff ff. probe_spi_rems: id1 0xff, id2 0xff Probing for SST SST25VF040B.REMS, 512 KB: REMS returned ff ff. probe_spi_rems: id1 0xff, id2 0xff Probing for SST SST25VF080B, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for SST SST28SF040A, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0x53, id2 0x69, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0x33, id2 0x33, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xc4, id2 0x9a Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0x53, id2 0x69, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0x53, id2 0x69, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for ST M25P05.RES, 64 KB: RDID returned 0x1f 0x45 0x01. Probing for ST M25P10-A, 128 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for ST M25P10.RES, 128 KB: RDID returned 0x1f 0x45 0x01. Probing for ST M25P20, 256 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for ST M25P40, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for ST M25P40-old, 512 KB: RDID returned 0x1f 0x45 0x01. Probing for ST M25P80, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for ST M25P16, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for ST M25P32, 4096 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for ST M25P64, 8192 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for ST M25P128, 16384 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for ST M29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x53, id2 0x69 Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xc4, id2 0x9a Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W25x10, 128 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Winbond W25x20, 256 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Winbond W25x40, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Winbond W25x80, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Winbond W25x16, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Winbond W29C011, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C020C, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C040P, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29EE011, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0x53, id2 0x69, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0x53, id2 0x69, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000. RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Not unmapping zero size at (nil) Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000. RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Not unmapping zero size at (nil) Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000. RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Not unmapping zero size at (nil) Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000. RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Not unmapping zero size at (nil) Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000. RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Not unmapping zero size at (nil) Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000. RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Not unmapping zero size at (nil) === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard you tested. Thanks for your help! === Reading flash... done.

2 1

Add URLs for three boards, fix a typo and add a note
by Idwer Vollering July 27, 2010

July 27, 2010

Add URLs for boards ASUS K8V, ASUS K8V SE Deluxe, Elitegroup K7S5A. FIxes a typo, adds a note for ASUS M2N-E. Signed-off-by: Idwer Vollering <vidwer(a)gmail.com>

3 2

[PATCH] new windows port
by Stefan Reinauer June 4, 2010

June 4, 2010

Hi, I separated the direct io access code from the flashrom changes, to make this code easily available for the other coreboot utilities, too. The remaining windows patch is rather small. I'll clean up the directio code some more and make a release asap. Best regards, Stefan -- coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br. Tel.: +49 761 7668825 • Fax: +49 761 7664613 Email: info(a)coresystems.de • http://www.coresystems.de/ Registergericht: Amtsgericht Freiburg • HRB 7656 Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866

3 9

[patch] add version information similar to 'uname -mrs'
by Idwer Vollering March 27, 2010

March 27, 2010

Include detailed versioning information in the binary (--version). Signed-off-by: Idwer Vollering <vidwer(a)gmail.com> --- Future thoughts: include the used version of libpci.

4 16

[PATCH] Check if an erase is needed to write
by Carl-Daniel Hailfinger March 8, 2010

March 8, 2010

For optimal partial reflashing, we have to find out which parts of the chip can be written without erase. For that, the only criterion (except a limit on the number of writes for very old chips) is whether the write will only clear bits (set them to 0). If (current&new==new) we can skip the erase. If any bit would have to be set to 1, we need to erase. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-need_erase/flash.h =================================================================== --- flashrom-need_erase/flash.h (Revision 725) +++ flashrom-need_erase/flash.h (Arbeitskopie) @@ -455,6 +455,7 @@ int max(int a, int b); int check_erased_range(struct flashchip *flash, int start, int len); int verify_range(struct flashchip *flash, uint8_t *cmpbuf, int start, int len, char *message); +int need_erase(uint8_t *have, uint8_t *want, int len); char *strcat_realloc(char *dest, const char *src); #define OK 0 Index: flashrom-need_erase/flashrom.c =================================================================== --- flashrom-need_erase/flashrom.c (Revision 725) +++ flashrom-need_erase/flashrom.c (Arbeitskopie) @@ -379,6 +379,26 @@ return ret; } +/** + * Check if the buffer have can be programmed to the content of want without + * erasing. This is only possible if no bit has to be set to 1. + * + * @have buffer with current content + * @want buffer with desired content + * @len length of the verified area + * @return 0 if no erase is needed, >0 otherwise + */ +int need_erase(uint8_t *have, uint8_t *want, int len) +{ + int failcount = 0; + int i; + + for (i = 0; i < len; i++) + if ((have[i] & want[i]) != want[i]) + failcount++; + return failcount; +} + struct flashchip *probe_flash(struct flashchip *first_flash, int force) { struct flashchip *flash; -- http://www.hailfinger.org/

4 12

Failed Flash MS7207
by Spronk Enstein March 8, 2010

March 8, 2010

Board Name Ms7207 Ver. 1.0 Bios Website: http://www.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=1&pro… Flashrom -V output: flashrom v0.9.1-r706 No coreboot table found. Found chipset "NVIDIA MCP51", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 601M loops per second, 100 myus = 179 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F002(N)BB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for AMD Am29F002(N)BT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xff, id2 0xff Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT49F002(N), 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT49F002(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for EMST F49B002UA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for EON EN29F002(A)(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Fujitsu MBM29F004BC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Fujitsu MBM29F004TC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Intel 28F001BX-B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Intel 28F001BX-T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for Macronix MX29F001T, 128 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0xe2, id2 0xe1 Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0xe2, id2 0xe1 Probing for PMC Pm39LV010, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xff, id2 0xff Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST29EE020A, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for ST M29F002T/NT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for ST M29W040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0x9d, id2 0x6e Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0x9d, id2 0x6e Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0xe2, id2 0xe1 Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for SyncMOS S29C51001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for SyncMOS S29C51002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for SyncMOS S29C51004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for TI TMS29F002RB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for TI TMS29F002RT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0x9d, id2 0x6e Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0xff, id2 0xff Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: id1 0x9d, id2 0x6e Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. No operations were specified. lspci -nnvvvxx 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 07 72 30: 00 00 00 00 48 00 00 00 00 00 00 00 0a 01 00 00 40: 62 14 07 72 00 00 00 00 01 50 02 00 00 00 00 00 50: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 00 00 00 04 00 00 00 00 00 00 00 01 00 00 00 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff a0: 00 00 70 00 00 00 00 08 00 00 00 00 ff ff ff ff b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270] (rev a2) Subsystem: Micro-Star International Co., Ltd. Device [1462:7207] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Command: BaseUnitID=9 UnitCnt=15 MastHost- DefDir- DUL- Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b- Link Config 0: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.03 Link Frequency 0: 400MHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000 00: de 10 70 02 06 00 b0 00 a2 00 00 05 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 07 72 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 40: 62 14 07 72 08 e0 e9 01 22 30 00 00 d0 00 00 00 50: 23 02 7f 80 03 00 00 00 00 00 03 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 15 05 00 70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 55 00 80: 23 55 55 00 fa 00 64 0c 03 00 00 00 7f 00 00 00 90: 70 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 08 00 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0261] (rev a2) Subsystem: nVidia Corporation Device [10de:cb84] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: de 10 61 02 0f 00 a0 00 a2 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 84 cb 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00 40: de 10 84 cb 00 00 00 00 fa 3e ff 00 fa 3e ff 00 50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 fe 37 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 f9 ff 70: 10 00 ff ff c1 00 00 00 00 00 45 19 00 00 00 0c 80: 09 20 00 10 0d 18 00 00 c0 00 00 01 00 00 00 00 90: 00 00 00 00 00 00 00 00 21 47 65 b7 ef cd 00 00 a0: 00 00 10 c0 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 47 0c 47 00 0a 7f 0a 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a2) Subsystem: Micro-Star International Co., Ltd. Device [1462:7207] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 7 Region 4: I/O ports at 5000 [size=64] Region 5: I/O ports at 6000 [size=64] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00: de 10 64 02 01 00 b0 00 a2 00 05 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 50 00 00 01 60 00 00 00 00 00 00 62 14 07 72 30: 00 00 00 00 44 00 00 00 00 00 00 00 07 01 00 00 40: 62 14 07 72 01 00 02 c0 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 40 00 00 01 44 00 00 01 48 00 00 00 00 00 00 70: 01 00 00 00 00 00 a8 fe 00 00 fe fe 01 20 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: d4 30 80 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 10 10 04 00 00 a0 90 00 80 30 04 00 41 44 44 11 f0: 5a ff 5f bf 00 00 00 c0 10 00 00 00 00 00 00 00 00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026d] (rev a2) (prog-if 10) Subsystem: Micro-Star International Co., Ltd. Device [1462:7207] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at feade000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci_hcd 00: de 10 6d 02 07 00 b0 00 a2 10 03 0c 00 00 80 00 10: 00 e0 ad fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 07 72 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01 40: 62 14 07 72 01 00 02 fe 00 00 00 00 00 00 00 00 50: 48 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026e] (rev a2) (prog-if 20) Subsystem: Micro-Star International Co., Ltd. Device [1462:7207] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 22 Region 0: Memory at feadfc00 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd 00: de 10 6e 02 06 00 b0 00 a2 20 03 0c 00 00 80 00 10: 00 fc ad fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 07 72 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 02 03 01 40: 62 14 07 72 0a 80 98 20 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 20 20 01 00 00 60 18 85 03 3c 0a 01 00 00 00 00 70: 00 00 08 05 00 10 20 80 89 3d b6 22 77 25 54 00 80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 00 00 00 00 08 c0 00 00 00 00 00 00 00 00 b0: 33 00 11 22 00 00 00 00 ff 00 00 00 00 00 00 00 c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7207] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at ffa0 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pata_amd 00: de 10 65 02 05 00 b0 00 a1 8a 01 01 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: a1 ff 00 00 00 00 00 00 00 00 00 00 62 14 07 72 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01 40: 62 14 07 72 01 00 02 00 00 00 00 00 00 00 00 00 50: 03 f0 01 00 00 00 00 00 99 20 99 20 22 00 20 20 60: 00 c5 00 c7 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 f0 bd 20 00 00 2c 28 00 b0 d1 31 90: 00 00 02 34 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0266] (rev a1) (prog-if 85 [Master SecO PriO]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7207] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 23 Region 0: I/O ports at d800 [size=8] Region 1: I/O ports at d480 [size=4] Region 2: I/O ports at d400 [size=8] Region 3: I/O ports at d080 [size=4] Region 4: I/O ports at d000 [size=16] Region 5: Memory at feadd000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: sata_nv 00: de 10 66 02 07 00 b0 00 a1 85 01 01 00 00 00 00 10: 01 d8 00 00 81 d4 00 00 01 d4 00 00 81 d0 00 00 20: 01 d0 00 00 00 d0 ad fe 00 00 00 00 62 14 07 72 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01 40: 62 14 07 72 01 b0 02 00 00 00 00 00 00 00 00 00 50: 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 51 0c 00 00 00 0f 06 42 00 00 00 00 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00 80: 00 00 00 c0 90 de d9 7c 00 00 1b 3e 58 47 63 fc 90: 00 00 7d 33 00 00 00 00 06 00 06 10 00 00 01 01 a0: 14 10 00 00 00 00 00 00 00 00 00 00 33 33 00 02 b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 02 a8 d0: 0a 00 02 06 42 00 00 00 00 00 00 00 00 00 e0 00 e0: 0a 00 02 06 42 00 00 00 00 00 00 00 80 08 00 02 f0: 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev a2) (prog-if 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Capabilities: [b8] Subsystem: Gammagraphx, Inc. (or missing ID) Device [0000:0000] Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 00: de 10 6f 02 07 00 b0 00 a2 01 04 06 00 00 81 00 10: 00 00 00 00 00 00 00 00 00 03 03 40 e0 e0 80 02 20: b0 fe b0 fe f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 b8 00 00 00 00 00 00 00 00 00 02 02 40: 00 00 03 00 01 00 02 00 05 00 00 00 00 00 44 00 50: 00 00 fe 37 00 00 00 00 fe 1f ff 1f 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 a8 90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00 a0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 00 00 00 00 c0: 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio [10de:026c] (rev a2) Subsystem: Device [0880:10ec] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin B routed to IRQ 23 Region 0: Memory at fead8000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00: de 10 6c 02 06 00 b0 00 a2 00 03 04 00 00 80 00 10: 00 80 ad fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 80 08 ec 10 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 02 02 05 40: 80 08 ec 10 01 50 02 c0 00 00 00 00 01 01 0f 00 50: 05 6c 80 01 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 02 a8 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 46 00 29 00 00 00 00 00 00 00:14.0 Bridge [0680]: nVidia Corporation MCP51 Ethernet Controller [10de:0269] (rev a1) Subsystem: Micro-Star International Co., Ltd. Device [1462:7207] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at feadc000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at cc00 [size=8] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=0 PME- Kernel driver in use: forcedeth Kernel modules: forcedeth 00: de 10 69 02 07 00 b0 00 a1 00 80 06 00 00 00 00 10: 00 c0 ad fe 01 cc 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 07 72 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 01 14 40: 62 14 07 72 01 00 02 fe 00 01 00 00 0f 00 00 10 50: 05 6c 84 01 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 02 a8 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 01 00 00 00 42 01 00 00 00 00 00 00 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface !!! Possibly incomplete decoding Command: WarmRst+ DblEnd- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Revision ID: 1.02 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 60: 00 00 00 00 e4 00 00 00 0f cc 0e 0f 3c 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 08 00 01 21 20 00 11 11 22 02 35 80 02 00 00 00 90: 56 04 51 02 00 00 ff 00 07 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 03 00 00 00 00 00 3f 00 00 00 00 00 01 00 00 00 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00 80: 03 00 e0 00 80 ff ef 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 03 0a 00 00 00 0b 00 00 03 00 40 00 00 0b fe 00 c0: 13 50 00 00 00 f0 ff 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 03 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: amd64_edac Kernel modules: amd64_edac_mod 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 00 00 00 00 00 00 00 01 10 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 ee e0 03 00 00 00 00 00 ee e0 03 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 77 00 00 00 00 00 00 00 42 35 82 13 31 0b 00 00 90: 80 cc 0c 3e 07 87 7b 3e 00 00 00 00 0d 02 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 4f 78 1d cb f4 00 00 00 ff fe 18 00 78 98 6f 51 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 68 b8 14 bb 43 f7 b6 b1 4f 9a 03 89 3c 1b 61 0a e0: 2a a3 de 08 c7 ff 01 cc 37 0f 69 10 5c e7 19 1a f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: k8temp Kernel modules: k8temp 00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: ff 3b 00 00 40 00 40 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 80 c9 fc fc 60: b7 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 11 01 32 51 21 40 70 50 00 2a 00 08 18 21 00 00 80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00 90: 00 00 00 00 45 00 00 00 00 4e 89 31 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 3f 00 00 80 fb 83 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 01 a7 0d 00 00 00 40 00 00 00 00 00 e0: 00 00 00 00 24 06 00 04 19 05 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03:07.0 Communication controller [0780]: Conexant Systems, Inc. HSF 56k Data/Fax Modem [14f1:2f20] Subsystem: Conexant Systems, Inc. Device [14f1:2000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 5 Region 0: Memory at febf0000 (32-bit, non-prefetchable) [size=64K] Region 1: I/O ports at ec00 [size=8] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: f1 14 20 2f 07 01 90 02 00 00 80 07 00 40 00 00 10: 00 00 bf fe 01 ec 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 14 00 20 30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 00 00 40: 01 00 22 c0 00 00 00 00 56 12 01 00 01 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 superiotool -deV output superiotool r3844 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0x1c00, id=0x6388 Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0x8863, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Found Winbond W83627EHF/EF/EHG/EG (id=0x88, rev=0x63) at 0x4e Register dump: idx 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f val 88 63 ff 00 1c 00 40 ff 50 04 00 00 02 21 00 ff def 88 MM ff 00 MM 00 MM RR 50 04 00 RR 00 21 00 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 f2 f4 f5 val 00 00 00 00 02 8e 00 ff 00 00 def 01 03 f0 06 02 8e 00 ff 00 00 LDN 0x01 (Parallel port) idx 30 60 61 70 74 f0 val 00 00 00 00 04 3f def 01 03 78 07 04 3f LDN 0x02 (COM1) idx 30 60 61 70 f0 val 00 00 00 00 00 def 01 03 f8 04 00 LDN 0x03 (COM2) idx 30 60 61 70 f0 f1 val 00 00 00 00 00 00 def 01 02 f8 03 00 00 LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 72 f0 val 01 00 60 00 64 01 0c 82 def 01 00 60 00 64 01 0c 83 LDN 0x06 (Serial flash interface) idx 30 62 63 val 00 ff ff def 00 00 00 LDN 0x07 (GPIO 1, GPIO 6, game port, MIDI port) idx 30 60 61 62 63 70 f0 f1 f2 f3 f4 f5 f6 f7 val 00 02 01 03 30 00 ff ff ff ff ff ff ff 00 def 00 02 01 03 30 09 ff 00 00 00 ff 00 00 00 LDN 0x08 (WDTO#, PLED) idx 30 f5 f6 f7 val 00 ff 00 ff def 00 00 00 00 LDN 0x09 (GPIO 2, GPIO 3, GPIO 4, GPIO 5, SUSLED) idx 30 e0 e1 e2 e3 e4 e5 f0 f1 f2 f3 f4 f5 f6 f7 val 00 ff ff ff ff ff ff ff ff ff 09 ff ff ff ff def 00 ff 00 00 ff 00 00 ff 00 00 00 ff 00 00 00 LDN 0x0a (ACPI) idx 30 70 e0 e1 e2 e3 e4 e5 e6 e7 e8 f2 f3 f4 f6 f7 val 00 00 01 00 ff 27 00 00 0c 00 09 7c 00 00 00 00 def 00 00 01 00 ff 08 00 RR 00 00 RR 7c 00 00 00 00 LDN 0x0b (Hardware monitor) idx 30 60 61 70 f0 f1 val 01 0a 10 00 81 06 def 00 00 00 00 c1 00 Hardware monitor (0x0a15) Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xf

5 4

Patch: Support ASUS M2NBP-VM CSM
by Michael Karcher March 7, 2010

March 7, 2010

Add board enable for Asus M2NBP-VM CSM Signed-Off-By: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Index: board_enable.c =================================================================== --- board_enable.c (Revision 803) +++ board_enable.c (Arbeitskopie) @@ -450,6 +450,7 @@ case 0x0030: /* CK804 */ case 0x0050: /* MCP04 */ case 0x0060: /* MCP2 */ + case 0x0264: /* MCP51 */ break; default: fprintf(stderr, "\nERROR: no nVidia SMBus controller found.\n"); @@ -470,6 +471,14 @@ } /** + * Suited for ASUS M2NBP-VM CSM: nVidia MCP51. + */ +static int nvidia_mcp_gpio0_raise(const char *name) +{ + return nvidia_mcp_gpio_set(0x00, 1); +} + +/** * Suited for ASUS P5ND2-SLI Deluxe: LGA775 + nForce4 SLI + MCP04. */ static int nvidia_mcp_gpio10_raise(const char *name) @@ -1226,6 +1235,7 @@ {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x808C, NULL, NULL, "ASUS", "A7V8X", board_asus_a7v8x}, {0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, NULL, NULL, "ASUS", "A7V8X-MX SE", board_asus_a7v8x_mx}, {0x1106, 0x1336, 0x1043, 0x80ed, 0x1106, 0x3288, 0x1043, 0x8249, NULL, NULL, "ASUS", "M2V-MX", board_asus_m2v_mx}, + {0x10DE, 0x0264, 0x1043, 0x81C0, 0x10DE, 0x0260, 0x1043, 0x81C0, NULL, NULL, "ASUS", "M2NBP-VM CSM", nvidia_mcp_gpio0_raise}, {0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028, NULL, NULL, "ASUS", "P4B266", intel_ich_gpio22_raise}, {0x8086, 0x1A30, 0x1043, 0x8025, 0x8086, 0x244B, 0x104D, 0x80F0, NULL, NULL, "ASUS", "P4B266-LM", intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80F2, 0x105A, 0x3373, 0x1043, 0x80F5, NULL, NULL, "ASUS", "P4P800-E Deluxe", intel_ich_gpio21_raise},

3 3

Failed BIOS Flash Assistance
by bas nowaira March 7, 2010

March 7, 2010

Greetings, Per my conversation with agaran on irc, please find the attached log of: < agaran> !summary bassem < flashrom_bot> bassem: please mail the output of 'flashrom -V', 'lspci -nnvvvxxx', 'superiotool -deV' (all commands as root), the exact name of your board (including revision, if there are multiple revisions), and a link to the official BIOS download to flashrom(a)flashrom.org I appreciate all the assistance you can provide. -- /* bas */

4 8

[Patch] Board enable for Asus P4B266-LM
by Luc Verhaegen March 7, 2010

March 7, 2010

This is a resend of the previous patch, now using the intel_ich_gpio_raise function. I have now created a separate function, instead of hooking this code onto another board enable that also raises gpio21 (but with a different ICH). Allan, i know you have given an Ack already, but this is now based on more general infrastructure. Can you give this patch a whirl too? You will have to apply this patch here first though: http://patchwork.coreboot.org/patch/467/raw/ Thanks, Luc Verhaegen.

2 1