November 2009 - flashrom - mail.coreboot.org

#1: flashRom doesn't work on MotherBoard with ICH9 + MP2532
by flashrom Oct. 26, 2010

Oct. 26, 2010

#1: flashRom doesn't work on MotherBoard with ICH9 + MP2532 --------------------------------------------------+------------------------- Reporter: annyvonne.le_coq@… | Owner: hailfinger Type: defect | Status: new Priority: major | Milestone: flashrom 0.9.1 Component: flashrom | Version: Keywords: | Dependencies: Patchstatus: there is no patch | --------------------------------------------------+------------------------- Hi all, I have a mother board equipped with ICH9 chipset and M25P32 flash device. I can't use flashrom to re-program my BIOS. 1) The ICH9 is not recognized. So, I add its device ID (2910) in chipset_enable.c file. 2) Then, M25P32 flash device is recognized, but OPCODE 06 is not in the list OPCODESS OS_ST_M25P. ich_spi_command try to find the command 06 in the list, The list contains only following values: 2, 3, 216, 5, 171, 1, 159, 199. The M25P32 has been tested with flashrom. So, I imagine that the problem is due to the caller. Have you got an idea about this issue. Thanks Anne -- Ticket URL: <http://www.flashrom.org/trac/flashrom/ticket/1> flashrom <http://www.flashrom.org/>

2 14

flashrom read works with ASUS P5B-V v0.9.1-r736
by Oliver Schnatz Sept. 4, 2010

Sept. 4, 2010

Hello! I tested flashrom reading with my motherboard. Currently I do not get a updated version for my board and I'm not brave enough to flash the current again. Thanks for your work on flashrom! Oliver (Germany) flashrom v0.9.1-r736 No coreboot table found. Found chipset "Intel ICH8/ICH8R", enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 Root Complex Register Block address = 0xfed1c000 GCS = 0xa0464: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 0x04: 0x6008 (HSFS) FLOCKDN 0, FDV 1, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0 0x50: 0x0000ffff (FRAP) BMWAG 0, BMRAG 0, BRWA 255, BRRA 255 0x54: 0x00000000 (FREG0) 0x58: 0x00ff0040 (FREG1) 0x5C: 0x003f0001 (FREG2) 0x60: 0x00000fff (FREG3) 0x64: 0x00000000 (FREG4) 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x007f1004 (SSFS, SSFC) 0x94: 0x0006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xB0: 0x00004000 (FDOC) Programming OPCODES... program_opcodes: preop=0006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: LPC,FWH,SPI. Calibrating delay loop... 434M loops per second, 100 myus = 190 us. OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ASD AE49F2008, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT25DF021, 256 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT25DF041A, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT25DF081, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT25DF161, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT25DF321, 4096 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT25DF641, 8192 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT25F512B, 64 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT25FS010, 128 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT25FS040, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT26DF041, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Chip status register is 00 Found chip "Atmel AT26DF081A" (1024 KB, SPI) at physical address 0xfff00000. Probing for Atmel AT26DF161, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT26F004, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT29C512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT45DB011D, 128 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT45DB021D, 256 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT45DB041D, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A25L40P, 512 KB: RDID returned 0x1f 0x45 0x01 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for AMIC A29002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Eon EN25B05, 64 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25B10, 128 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25B20, 256 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25B40, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25B80, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25B16, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25B32, 4096 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25B64, 8192 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25D16, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25F05, 64 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25F10, 128 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25F20, 256 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25F40, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25F80, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25F16, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Eon EN25F32, 4096 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xc4, id2 0x9a Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX25L1005, 128 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX25L2005, 256 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX25L4005, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX25L8005, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX25L1605, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX25L3205, 4096 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX25L6405, 8192 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX25L12805, 16384 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Numonyx M25PE20, 256 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Numonyx M25PE40, 256 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Numonyx M25PE80, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Numonyx M25PE16, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for PMC Pm25LV010, 128 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for PMC Pm25LV020, 256 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for PMC Pm25LV040, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for PMC Pm25LV512, 64 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for PMC Pm29F0002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm29F0002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0x53, id2 0x69, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff Probing for Spansion S25FL016A, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for SST SST25VF016B, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for SST SST25VF032B, 4096 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for SST SST25VF040B, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for SST SST25VF040.REMS, 512 KB: REMS returned ff ff. probe_spi_rems: id1 0xff, id2 0xff Probing for SST SST25VF040B.REMS, 512 KB: REMS returned ff ff. probe_spi_rems: id1 0xff, id2 0xff Probing for SST SST25VF080B, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for SST SST28SF040A, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0x53, id2 0x69, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0x33, id2 0x33, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xc4, id2 0x9a Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0x53, id2 0x69, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0x53, id2 0x69, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for ST M25P05.RES, 64 KB: RDID returned 0x1f 0x45 0x01. Probing for ST M25P10-A, 128 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for ST M25P10.RES, 128 KB: RDID returned 0x1f 0x45 0x01. Probing for ST M25P20, 256 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for ST M25P40, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for ST M25P40-old, 512 KB: RDID returned 0x1f 0x45 0x01. Probing for ST M25P80, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for ST M25P16, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for ST M25P32, 4096 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for ST M25P64, 8192 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for ST M25P128, 16384 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for ST M29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x53, id2 0x69 Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xc4, id2 0x9a Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W25x10, 128 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Winbond W25x20, 256 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Winbond W25x40, 512 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Winbond W25x80, 1024 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Winbond W25x16, 2048 KB: RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Probing for Winbond W29C011, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C020C, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C040P, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29EE011, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0x53, id2 0x69, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0x53, id2 0x69, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc4, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000. RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Not unmapping zero size at (nil) Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000. RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Not unmapping zero size at (nil) Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000. RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Not unmapping zero size at (nil) Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000. RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Not unmapping zero size at (nil) Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000. RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Not unmapping zero size at (nil) Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000. RDID returned 0x1f 0x45 0x01. probe_spi_rdid_generic: id1 0x1f, id2 0x4501 Not unmapping zero size at (nil) === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard you tested. Thanks for your help! === Reading flash... done.

2 1

Add URLs for three boards, fix a typo and add a note
by Idwer Vollering July 27, 2010

July 27, 2010

Add URLs for boards ASUS K8V, ASUS K8V SE Deluxe, Elitegroup K7S5A. FIxes a typo, adds a note for ASUS M2N-E. Signed-off-by: Idwer Vollering <vidwer(a)gmail.com>

3 2

[PATCH] new windows port
by Stefan Reinauer June 3, 2010

June 3, 2010

Hi, I separated the direct io access code from the flashrom changes, to make this code easily available for the other coreboot utilities, too. The remaining windows patch is rather small. I'll clean up the directio code some more and make a release asap. Best regards, Stefan -- coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br. Tel.: +49 761 7668825 • Fax: +49 761 7664613 Email: info(a)coresystems.de • http://www.coresystems.de/ Registergericht: Amtsgericht Freiburg • HRB 7656 Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866

3 9

[PATCH] Check if an erase is needed to write
by Carl-Daniel Hailfinger March 7, 2010

March 7, 2010

For optimal partial reflashing, we have to find out which parts of the chip can be written without erase. For that, the only criterion (except a limit on the number of writes for very old chips) is whether the write will only clear bits (set them to 0). If (current&new==new) we can skip the erase. If any bit would have to be set to 1, we need to erase. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-need_erase/flash.h =================================================================== --- flashrom-need_erase/flash.h (Revision 725) +++ flashrom-need_erase/flash.h (Arbeitskopie) @@ -455,6 +455,7 @@ int max(int a, int b); int check_erased_range(struct flashchip *flash, int start, int len); int verify_range(struct flashchip *flash, uint8_t *cmpbuf, int start, int len, char *message); +int need_erase(uint8_t *have, uint8_t *want, int len); char *strcat_realloc(char *dest, const char *src); #define OK 0 Index: flashrom-need_erase/flashrom.c =================================================================== --- flashrom-need_erase/flashrom.c (Revision 725) +++ flashrom-need_erase/flashrom.c (Arbeitskopie) @@ -379,6 +379,26 @@ return ret; } +/** + * Check if the buffer have can be programmed to the content of want without + * erasing. This is only possible if no bit has to be set to 1. + * + * @have buffer with current content + * @want buffer with desired content + * @len length of the verified area + * @return 0 if no erase is needed, >0 otherwise + */ +int need_erase(uint8_t *have, uint8_t *want, int len) +{ + int failcount = 0; + int i; + + for (i = 0; i < len; i++) + if ((have[i] & want[i]) != want[i]) + failcount++; + return failcount; +} + struct flashchip *probe_flash(struct flashchip *first_flash, int force) { struct flashchip *flash; -- http://www.hailfinger.org/

4 12

[Patch] Board enable for Asus P4B266-LM
by Luc Verhaegen March 7, 2010

March 7, 2010

This is a resend of the previous patch, now using the intel_ich_gpio_raise function. I have now created a separate function, instead of hooking this code onto another board enable that also raises gpio21 (but with a different ICH). Allan, i know you have given an Ack already, but this is now based on more general infrastructure. Can you give this patch a whirl too? You will have to apply this patch here first though: http://patchwork.coreboot.org/patch/467/raw/ Thanks, Luc Verhaegen.

2 1

via epia cn1000eg flash failed.
by Yuri Schaeffer March 2, 2010

March 2, 2010

Hi, I tried to flash to the latest BIOS for my board but it failed at verifying. The backup I made a few minutes earlier has the same problem. I did not (dare to) reboot the system. Attached flashrom output and lspci -vvnnxxx. board: via epia cn 1000eg southbr: VT8237R Plus (according to the specs) flashrom: v0.9.1-r750 bios image: 1.14, 2009/07/31, http://www.via.com.tw/servlet/downloadSvl?id=400&download_file_id=4942 Currently I have no idea how to repair my system. Folks at #flashrom pointed me to here. -- yuri $ sudo ./flashrom -Vw ../I1300114.BIN flashrom v0.9.1-r750 No coreboot table found. Found chipset "VIA VT8237", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Disabling flash write protection for board "VIA EPIA-CN"... OK. Calibrating delay loop... 263M loops per second, 100 myus = 199 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xea, id2 0x56 Probing for AMD Am29F080B, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xea, id2 0x56 Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xff, id2 0xff Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT49F002(N), 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xea, id2 0x56 Probing for AMIC A49LF040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for EMST F49B002UA, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xea, id2 0x00 Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xea, id2 0x00 Probing for Intel 28F001BX-B, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Intel 28F001BX-T, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xea, id2 0x56 Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for Macronix MX29F001T, 128 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0x81, id2 0xf6 Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0x81, id2 0xf6 Probing for PMC Pm39LV010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xea, id2 0x56 Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST29EE020A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xea, id2 0x56 Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for ST M29F002T/NT, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xea, id2 0x56 Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xea, id2 0x00 Probing for ST M29W010B, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for ST M29W040B, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for ST M50FLW040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for ST M50FLW040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for ST M50FLW080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x81, id2 0xf6 Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xea, id2 0x56 Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SyncMOS S29C51001T, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SyncMOS S29C51002T, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SyncMOS S29C51004T, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for TI TMS29F002RB, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for TI TMS29F002RT, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Programming page: 0007 at address: 0x00070000 COMPLETE. Verifying flash... VERIFY FAILED at 0x00005555! Expected=0xff, Read=0xaa, failed byte count from 0x00000000-0x0007ffff: 0x16fd Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! 00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:0314] Subsystem: VIA Technologies, Inc. Device [1106:aa08] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx- Latency: 8 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] Capabilities: [80] AGP version 3.5 Status: RQ=8 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: agpgart-via Kernel modules: via-agp 00: 06 11 14 03 06 00 30 a2 00 00 00 06 00 08 80 00 10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 08 aa 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: c7 db 10 db 24 00 00 00 00 00 1f c4 00 04 00 01 50: 01 00 02 00 00 00 00 00 08 00 01 80 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 02 50 35 00 0b 0a 00 07 00 00 00 00 00 00 00 00 90: 80 01 00 00 20 0f 01 00 00 00 ca 32 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 03 00 00 00 00 00 00 21 d2 00 8c c0: 02 02 80 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:1314] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: 06 11 14 13 06 00 00 02 00 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.2 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:2314] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: 06 11 14 23 06 00 00 02 00 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 88 7a 6f 88 1e 16 01 99 00 64 00 00 00 b2 88 c7 60: ff ff 0f ff ff 0f ff 30 00 00 00 00 00 00 00 00 70: 11 11 11 11 35 28 74 00 0a aa 24 aa 00 6d 00 00 80: 1b 0a 0a 0a 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.3 Host bridge [0600]: VIA Technologies, Inc. PT890 Host Bridge [1106:3208] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: via-agp 00: 06 11 08 32 06 00 00 02 00 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 08 10 00 00 00 00 00 00 00 08 00 00 00 00 00 00 50: 20 00 11 1f 89 00 c5 67 00 00 00 00 00 00 00 00 60: 03 94 7a 00 88 d9 80 00 00 83 86 10 c8 c0 89 41 70: 00 06 00 06 06 06 01 9f 87 87 00 20 00 00 00 00 80: aa 0f 00 e0 00 40 29 00 40 00 00 00 00 00 00 00 90: 04 04 06 07 00 00 00 12 33 00 00 00 00 0f 00 00 a0: 41 ef 44 00 10 00 00 00 00 00 00 00 00 00 00 00 b0: 61 aa aa 5a 0f 00 00 00 08 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: aa 79 78 01 80 8a aa 00 01 0a 80 00 50 be 00 00 e0: ee 00 ac 00 66 00 33 00 86 00 00 00 11 10 00 10 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.4 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:4314] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: 06 11 14 43 06 00 00 02 00 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 80 20 fb ff fe f0 77 80 00 00 00 00 00 00 00 00 b0: 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 08 08 00 00 08 08 00 00 00 09 00 00 00 00 00 00 e0: 22 22 00 00 00 00 00 00 00 03 01 00 80 07 29 00 f0: 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00:00.7 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:7314] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: 06 11 14 73 06 00 00 02 00 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 40: 14 19 88 80 82 44 00 04 13 b9 88 80 82 44 00 01 50: 00 00 00 00 00 00 01 40 08 00 01 80 00 00 00 00 60: 00 aa 0f e0 00 00 00 00 00 00 00 00 00 00 00 00 70: c2 c8 ee 01 20 0f d0 6e 01 00 00 00 00 00 02 10 80: 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 90: 00 00 00 00 20 0f 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 05 01 00 a3 55 22 22 44 45 23 33 11 00 00 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 40 29 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fb000000-fcffffff Prefetchable memory behind bridge: f4000000-f7ffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR+ <PERR+ BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel modules: shpchp 00: 06 11 98 b1 07 00 30 02 00 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 b0 b0 20 e2 20: 00 fb f0 fc 00 f4 f0 f7 00 00 00 00 00 00 00 00 30: 00 00 00 00 70 00 00 00 00 00 00 00 00 00 0c 00 40: 83 43 62 44 34 72 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 01 00 02 02 00 00 00 00 00 00 00 00 00 00 00 00 80: 0e 00 35 00 0b 0a 00 07 00 00 00 00 00 00 00 00 90: 80 00 00 00 00 0f 01 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 80 63 08 00 00 00 00 00 00 00 1f c4 00 04 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin B routed to IRQ 11 Region 0: I/O ports at fc00 [size=8] Region 1: I/O ports at f800 [size=4] Region 2: I/O ports at f400 [size=8] Region 3: I/O ports at f000 [size=4] Region 4: I/O ports at ec00 [size=16] Region 5: I/O ports at e800 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: sata_via Kernel modules: sata_via 00: 06 11 49 31 07 00 90 02 80 8f 01 01 00 20 80 00 10: 01 fc 00 00 01 f8 00 00 01 f4 00 00 01 f0 00 00 20: 01 ec 00 00 01 e8 00 00 00 00 00 00 06 11 49 31 30: 00 00 00 00 c0 00 00 00 00 00 00 00 0b 02 00 00 40: 43 03 f1 44 0e af 00 00 00 82 45 03 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 10 10 00 05 00 10 00 60: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 01 00 01 00 10 00 00 00 80: 00 00 00 00 00 00 00 00 00 10 91 36 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 80 02 49 31 06 11 49 31 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 0 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at e400 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pata_via 00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 e4 00 00 00 00 00 00 00 00 00 00 06 11 71 05 30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 01 00 00 40: 4b f2 09 05 18 8c c0 00 99 99 99 99 ff 00 a8 a8 50: 07 07 07 07 0c 00 00 00 a8 a8 a8 a8 00 00 00 00 60: 00 02 00 00 00 00 00 00 00 02 00 00 00 00 00 00 70: 82 01 00 00 00 00 00 00 82 01 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 06 00 71 05 06 11 71 05 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 09 00 00 00 00 00 00 00 00 00 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 4: I/O ports at e000 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd 00: 06 11 38 30 07 00 10 02 81 00 03 0c 08 20 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 e0 00 00 00 00 00 00 00 00 00 00 06 11 38 30 30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 01 00 00 40: 40 12 03 00 00 00 00 00 00 0b a0 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 4: I/O ports at dc00 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd 00: 06 11 38 30 07 00 10 02 81 00 03 0c 08 20 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 dc 00 00 00 00 00 00 00 00 00 00 06 11 38 30 30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 01 00 00 40: 40 12 03 00 00 00 00 00 00 0b a0 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at d800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd 00: 06 11 38 30 07 00 10 02 81 00 03 0c 08 20 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d8 00 00 00 00 00 00 00 00 00 00 06 11 38 30 30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 02 00 00 40: 40 12 03 00 00 00 00 00 00 0b a0 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at d400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd 00: 06 11 38 30 07 00 10 02 81 00 03 0c 08 20 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d4 00 00 00 00 00 00 00 00 00 00 06 11 38 30 30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 02 00 00 40: 40 12 03 00 00 00 00 00 00 0b a0 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20) Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 5 Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd 00: 06 11 04 31 17 00 10 02 86 20 03 0c 08 20 80 00 10: 00 f0 ff fd 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 04 31 30: 00 00 00 00 80 00 00 00 00 00 00 00 05 03 00 00 40: 00 00 03 00 00 00 00 00 a8 20 00 09 00 00 00 00 50: 00 5a 00 80 00 00 00 00 04 0b 66 88 03 66 88 00 60: 20 20 01 00 00 00 00 00 01 00 00 00 00 00 08 c0 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 88 00 00 00 00 00 00 00 00 00 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227] Subsystem: VIA Technologies, Inc. Device [1106:aa08] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel modules: i2c-viapro 00: 06 11 27 32 87 00 10 02 00 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 08 aa 30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 40: 54 7f f8 0b 00 00 00 00 0c 20 00 00 04 00 0a 08 50: 80 99 09 00 00 a0 5b 00 02 00 00 09 00 00 00 00 60: 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00 70: 06 11 08 aa 00 00 00 00 00 00 00 00 20 00 00 00 80: 20 84 49 00 1a 70 00 00 01 04 00 00 04 18 00 00 90: f0 11 02 88 a0 c2 06 00 00 82 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 01 05 01 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 03 09 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 0b 00 00 00 00 00 00 00 00 00 00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60) Subsystem: VIA Technologies, Inc. Device [1106:aa08] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 5 Region 0: I/O ports at d000 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: VIA 82xx Audio Kernel modules: snd-via82xx 00: 06 11 59 30 01 00 10 02 60 00 01 04 00 00 00 00 10: 01 d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 08 aa 30: 00 00 00 00 c0 00 00 00 00 00 00 00 05 03 00 00 40: 01 cc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00 d0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 78) Subsystem: VIA Technologies, Inc. Device [1106:0102] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at c800 [size=256] Region 1: Memory at fdffe000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: via-rhine Kernel modules: via-rhine 00: 06 11 65 30 87 00 10 02 78 00 00 02 08 20 00 00 10: 01 c8 00 00 00 e0 ff fd 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 02 01 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 03 08 40: 01 00 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.0 PCI bridge [0604]: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode) [3388:0021] (rev 11) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 32, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: ec000000-f3ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [90] CompactPCI hot-swap <?> Kernel modules: shpchp 00: 88 33 21 00 07 00 90 82 11 00 04 06 08 20 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 20 a0 a0 80 22 20: e0 fd e0 fd 00 ec f0 f3 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 ff 00 04 00 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0a 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 90 02 f6 00 00 c0 00 00 00 00 00 00 00 00 00 90: 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 [S3 UniChrome Pro] [1106:3344] (rev 01) Subsystem: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 [S3 UniChrome Pro] [1106:3344] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min) Interrupt: pin A routed to IRQ 10 Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M] Region 1: Memory at fb000000 (32-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at fc000000 [disabled] [size=64K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] AGP version 3.0 Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none> 00: 06 11 44 33 07 00 30 02 01 00 00 03 00 20 00 00 10: 08 00 00 f4 00 00 00 fb 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 44 33 30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 02 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 70 22 06 00 00 00 00 00 00 00 00 00 00 00 00 70: 02 00 30 00 0b 1e 00 ff 00 02 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02:08.0 Multimedia video controller [0400]: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder [4444:0016] (rev 01) Subsystem: Hauppauge computer works Inc. Device [0070:e807] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 5 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ivtv Kernel modules: ivtv 00: 44 44 16 00 06 00 10 02 01 00 00 04 08 40 00 00 10: 08 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 70 00 07 e8 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 80 08 40: ff ff 00 00 01 00 02 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02:09.0 Multimedia video controller [0400]: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder [4444:0016] (rev 01) Subsystem: Hauppauge computer works Inc. Device [0070:e817] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 5 Region 0: Memory at ec000000 (32-bit, prefetchable) [size=64M] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ivtv Kernel modules: ivtv 00: 44 44 16 00 06 00 10 02 01 00 00 04 08 40 00 00 10: 08 00 00 ec 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 70 00 17 e8 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 80 08 40: ff ff 00 00 01 00 02 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

5 12

Re: [flashrom] [coreboot] flashrom on MCP73
by Carl-Daniel Hailfinger Feb. 13, 2010

Feb. 13, 2010

Hi Fabrício, [Followup to flashrom(a)flashrom.org please] some of us are interested in reverse engineering flashrom SPI support for your chipset. Do you still have that board available? On 15.01.2009 18:12, Fabrício Ceolin wrote: > On Wed, Jan 14, 2009 at 9:36 PM, Peter Stuge <peter(a)stuge.se> wrote: > >> Fabrício Ceolin wrote: >> >>> We are trying to make flashrom work on http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=858&… >>> >>> Chipset MCP73 / SPI chip Macronix MX25L8005. >>> >>> We made modifications using a enable_flash_mcp55 function, but >>> does't work. >>> >> First you have to figure out what chip is the SPI bus master. >> > We made these tests. There are a superio, but the bios chip isn't connect to > it. > The bios chip is directly connected to the chipset MCP73. > > So, I need to the datasheet of MCP73 to implement it. > Did you get any datasheets from Nvidia? Regards, Carl-Daniel -- Developer quote of the week: "We are juggling too many chainsaws and flaming arrows and tigers."

1 1

Abit AN-M2
by NotLim Jan. 8, 2010

Jan. 8, 2010

Hi there... i had a problem, upgrading my motherboard bios... i was on #flashrom ... and some guy/girl named "carldani" told me: <carldani> can you mail the output of "flashrom -V", "lspci -nnvvvxxx", "superiotool -d" (allcommands as root), the exact name of your board (including revision, if there are multiple revisions), and a link to the official BIOS download <carldani> and please write in the mail that you need a board enable, and that it is Phoenix BIOS. Well: I need a board enable. My motherboard is an Abit AN-M2. Official links for bioses is here: http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA… I was trying to upgrade from 07/16/2007 (BIOS ID:13) to (today) latest version: 01/03/2008 (BIOS ID:19). I've attached "flashrom -V" as flashromV.txt, "lspci -nnvvvxxx" as lspcinnvvvxxx.txt, "superiotool -d" as superio.txt. And also a dmidecode and current error as "failed.txt" (You can see here too: http://pastebin.com/f7056e678 ) Thanks a lot! and... it is Phoenix BIOS!

3 4

Scary error message
by Fraser Hanson Dec. 22, 2009

Dec. 22, 2009

Hi, I flashed my bios with flashrom tonight and got the scary warning message saying "erase failed" and "do not reboot". I haven't rebooted. As far as I can tell from using flashrom itself, everything is actually fine. The erase appears to have failed at physical address 0, which I would guess means that nothing actually happened. I had taken a dump of the original bios before starting, and "flashrom -v" now verifies that it is identical. Furthermore, a new dump of the bios matches the original dump from before I tried to write the bios. My board is an MSI K8N Neo4 Platinum. Output from my dump attempt and subsequent messing around follows. Do I have your blessing to reboot my machine? --Fraser ====================================================================== fraser@ged:/tmp/7125v1D$ sudo flashrom flashrom v0.9.1-r706 No coreboot table found. Found chipset "NVIDIA CK804", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. No operations were specified. fraser@ged:/tmp/7125v1D$ sudo flashrom -w W7125NMS.1D0 flashrom v0.9.1-r706 No coreboot table found. Found chipset "NVIDIA CK804", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Programming page: ERASE FAILED at 0x00000000! Expected=0xff, Read=0x49, failed byte count from 0x00000000-0x0000ffff: 0x599 ERASE FAILED! ERASE FAILED! FAILED! Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net channel #flashrom or mail flashrom(a)flashrom.org ------------------------------------------------------------ DO NOT REBOOT OR POWEROFF! fraser@ged:/tmp/7125v1D$ sudo flashrom -w original.bios flashrom v0.9.1-r706 No coreboot table found. Found chipset "NVIDIA CK804", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Programming page: ERASE FAILED at 0x00000000! Expected=0xff, Read=0x49, failed byte count from 0x00000000-0x0000ffff: 0x599 ERASE FAILED! ERASE FAILED! FAILED! Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net channel #flashrom or mail flashrom(a)flashrom.org ------------------------------------------------------------ DO NOT REBOOT OR POWEROFF! fraser@ged:/tmp/7125v1D$ sudo flashrom -r bios flashrom v0.9.1-r706 No coreboot table found. Found chipset "NVIDIA CK804", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. Reading flash... done. fraser@ged:/tmp/7125v1D$ md5sum bios 8382ac62ffcfe57a86514dad936deb82 bios fraser@ged:/tmp/7125v1D$ md5sum original.bios 8382ac62ffcfe57a86514dad936deb82 original.bios fraser@ged:/tmp/7125v1D$ sudo flashrom -v original.bios flashrom v0.9.1-r706 No coreboot table found. Found chipset "NVIDIA CK804", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. Flash image seems to be a legacy BIOS. Disabling checks. Verifying flash... VERIFIED.

3 4