March 2024 - flashrom-gerrit - mail.coreboot.org

Change in flashrom[master]: pcidev: On arm64 we are not getting a valid BAR0 address
by Martijn Berger (Code Review) Sept. 13, 2025

Sept. 13, 2025

Martijn Berger has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/39965 ) Change subject: pcidev: On arm64 we are not getting a valid BAR0 address ...................................................................... pcidev: On arm64 we are not getting a valid BAR0 address It seems that there is some code to work around a possible bug in old versions of libpci. This trusts libpci if it is new enough Change-Id: I8bd32c6344b0831a949c3853abeb84905420922a Signed-off-by: Martijn Berger <martijn.berger(a)gmail.com> --- M pcidev.c M programmer.h 2 files changed, 30 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/65/39965/1 diff --git a/pcidev.c b/pcidev.c index 54c1fd3..973acde 100644 --- a/pcidev.c +++ b/pcidev.c @@ -30,20 +30,47 @@ TYPE_UNKNOWN }; +int pci_bar_nuber_from_offset(int offset) +{ + switch (offset) { + case PCI_BASE_ADDRESS_0: + return 0; + case PCI_BASE_ADDRESS_1: + return 1; + case PCI_BASE_ADDRESS_2: + return 2; + case PCI_BASE_ADDRESS_3: + return 3; + case PCI_BASE_ADDRESS_4: + return 4; + case PCI_BASE_ADDRESS_5: + return 5; + default: + return -1; + } + return -1; +} + uintptr_t pcidev_readbar(struct pci_dev *dev, int bar) { uint64_t addr; uint32_t upperaddr; uint8_t headertype; uint16_t supported_cycles; + int bar_number; enum pci_bartype bartype = TYPE_UNKNOWN; headertype = pci_read_byte(dev, PCI_HEADER_TYPE) & 0x7f; msg_pspew("PCI header type 0x%02x\n", headertype); + bar_number = pci_bar_nuber_from_offset(bar); - /* Don't use dev->base_addr[x] (as value for 'bar'), won't work on older libpci. */ - addr = pci_read_long(dev, bar); + if (PCI_LIB_VERSION >= 0x030500 && bar_number > -1) { + addr = dev->base_addr[bar_number]; + } else { + /* Don't use dev->base_addr[x] (as value for 'bar'), won't work on older libpci. */ + addr = pci_read_long(dev, bar); + } /* Sanity checks. */ switch (headertype) { diff --git a/programmer.h b/programmer.h index 9a41be1..5d4c1d7 100644 --- a/programmer.h +++ b/programmer.h @@ -190,6 +190,7 @@ // FIXME: This needs to be local, not global(?) extern struct pci_access *pacc; int pci_init_common(void); +int pci_bar_nuber_from_offset(int offset); uintptr_t pcidev_readbar(struct pci_dev *dev, int bar); struct pci_dev *pcidev_init(const struct dev_entry *devs, int bar); /* rpci_write_* are reversible writes. The original PCI config space register -- To view, visit https://review.coreboot.org/c/flashrom/+/39965 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I8bd32c6344b0831a949c3853abeb84905420922a Gerrit-Change-Number: 39965 Gerrit-PatchSet: 1 Gerrit-Owner: Martijn Berger Gerrit-MessageType: newchange

5 6

Change in flashrom[master]: cli_classic.c: Add runtime measurement
by Simon Buhrow (Code Review) Aug. 20, 2025

Aug. 20, 2025

Simon Buhrow has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/47805 ) Change subject: cli_classic.c: Add runtime measurement ...................................................................... cli_classic.c: Add runtime measurement To get an fast and easy feedback on how parameters effect runtime (e.g. clock setting, polling delays, ...). Signed-off-by: Simon Buhrow <simon.buhrow(a)posteo.de> Change-Id: I2238b3f3e6c2ab7745994662a88787fa2e86d480 --- M cli_classic.c 1 file changed, 7 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/05/47805/1 diff --git a/cli_classic.c b/cli_classic.c index ae7f6ef..0d5381f 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -24,6 +24,7 @@ #include <string.h> #include <stdlib.h> #include <getopt.h> +#include <time.h> #include "flash.h" #include "flashchips.h" #include "fmap.h" @@ -142,6 +143,7 @@ /* Probe for up to eight flash chips. */ struct flashctx flashes[8] = {{0}}; struct flashctx *fill_flash; + struct timespec time_start, time_end; const char *name; int namelen, opt, i, j; int startchip = -1, chipcount = 0, option_index = 0, force = 0, ifd = 0, fmap = 0; @@ -528,6 +530,8 @@ /* FIXME: Delay calibration should happen in programmer code. */ myusec_calibrate_delay(); + timespec_get(&time_start, TIME_UTC); + if (programmer_init(prog, pparam)) { msg_perr("Error: Programmer initialization failed.\n"); ret = 1; @@ -806,6 +810,9 @@ for (i = 0; i < chipcount; i++) free(flashes[i].chip); + timespec_get(&time_end, TIME_UTC); + msg_gdbg("Runtime: %d:%2d min:s\n", (int)((time_end.tv_sec-time_start.tv_sec) / 60), (int)(time_end.tv_sec-time_start.tv_sec) % 60); + layout_cleanup(&include_args); free(filename); free(fmapfile); -- To view, visit https://review.coreboot.org/c/flashrom/+/47805 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I2238b3f3e6c2ab7745994662a88787fa2e86d480 Gerrit-Change-Number: 47805 Gerrit-PatchSet: 1 Gerrit-Owner: Simon Buhrow Gerrit-MessageType: newchange

5 11

Change in flashrom[master]: libflashrom.map: Add missing symbols
by Edward O'Callaghan (Code Review) April 7, 2025

April 7, 2025

Edward O'Callaghan has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/38993 ) Change subject: libflashrom.map: Add missing symbols ...................................................................... libflashrom.map: Add missing symbols The following symbols were missing at link-time from libflashrom: supported_flash_chips; supported_boards; supported_chipsets; Change-Id: I299928d62788c0abfe7f6cdd3e8ad8be0c49e45e Signed-off-by: Edward O'Callaghan <quasisec(a)google.com> --- M libflashrom.map 1 file changed, 3 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/93/38993/1 diff --git a/libflashrom.map b/libflashrom.map index d6dd24d..9430775 100644 --- a/libflashrom.map +++ b/libflashrom.map @@ -25,6 +25,9 @@ flashrom_set_log_callback; flashrom_shutdown; flashrom_supported_programmers; + flashrom_supported_flash_chips; + flashrom_supported_boards; + flashrom_supported_chipsets; flashrom_system_info; flashrom_version_info; local: *; -- To view, visit https://review.coreboot.org/c/flashrom/+/38993 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I299928d62788c0abfe7f6cdd3e8ad8be0c49e45e Gerrit-Change-Number: 38993 Gerrit-PatchSet: 1 Gerrit-Owner: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-MessageType: newchange

4 3

Change in flashrom[master]: tests/: Add programmer enumerate correspondence test
by Edward O'Callaghan (Code Review) Sept. 21, 2024

Sept. 21, 2024

Edward O'Callaghan has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/47356 ) Change subject: tests/: Add programmer enumerate correspondence test ...................................................................... tests/: Add programmer enumerate correspondence test The enumerate defines within programmer.h must be aligned with the programmer dispatch table within flashrom.c. The following unit-tests tries to improve coverage here to avoid issues like we saw when ENE and MEC1308 were upstreamed. BUG=none BRANCH=none TEST=meson test Change-Id: I13efc4561f743edf51326d4b408be8715b630377 Signed-off-by: Edward O'Callaghan <quasisec(a)google.com> --- M tests/flashrom.c M tests/tests.c M tests/tests.h 3 files changed, 94 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/56/47356/1 diff --git a/tests/flashrom.c b/tests/flashrom.c index 50464dd..9180922 100644 --- a/tests/flashrom.c +++ b/tests/flashrom.c @@ -15,6 +15,47 @@ #include <include/test.h> +/* must be before programmer.h include */ +#define CONFIG_INTERNAL 1 +#define CONFIG_DUMMY 1 +#define CONFIG_MEC1308 1 +#define CONFIG_NIC3COM 1 +#define CONFIG_NICREALTEK 1 +#define CONFIG_NICNATSEMI 1 +#define CONFIG_GFXNVIDIA 1 +#define CONFIG_RAIDEN 1 +#define CONFIG_DRKAISER 1 +#define CONFIG_SATASII 1 +#define CONFIG_ATAHPT 1 +#define CONFIG_ATAVIA 1 +#define CONFIG_ATAPROMISE 1 +#define CONFIG_IT8212 1 +#define CONFIG_FT2232_SPI 1 +#define CONFIG_SERPROG 1 +#define CONFIG_BUSPIRATE_SPI 1 +#define CONFIG_DEDIPROG 1 +#define CONFIG_DEVELOPERBOX_SPI 1 +#define CONFIG_ENE_LPC 1 +#define CONFIG_RAYER_SPI 1 +#define CONFIG_PONY_SPI 1 +#define CONFIG_NICINTEL 1 +#define CONFIG_NICINTEL_SPI 1 +#define CONFIG_NICINTEL_EEPROM 1 +#define CONFIG_OGP_SPI 1 +#define CONFIG_SATAMV 1 +#define CONFIG_LINUX_MTD 1 +#define CONFIG_LINUX_SPI 1 +#define CONFIG_LSPCON_I2C_SPI 1 +#define CONFIG_REALTEK_MST_I2C_SPI 1 +#define CONFIG_USBBLASTER_SPI 1 +#define CONFIG_MSTARDDC_SPI 1 +#define CONFIG_PICKIT2_SPI 1 +#define CONFIG_CH341A_SPI 1 +#define CONFIG_DIGILENT_SPI 1 +#define CONFIG_JLINK_SPI 1 +#define CONFIG_NI845X_SPI 1 +#define CONFIG_STLINKV3_SPI 1 + #include "programmer.h" void flashbuses_to_text_test_success(void **state) @@ -49,3 +90,54 @@ bustype = BUS_NONE; assert_string_equal(flashbuses_to_text(bustype), "None"); } + +void validate_prog_enumerates_test_success(void **state) +{ + (void) state; /* unused */ + + enum programmer prog = PROGRAMMER_INTERNAL; + const char *prog_names[] = { + "internal", + "dummy", + "mec1308", + "nic3com", + "nicrealtek", + "nicnatsemi", + "gfxnvidia", + "raiden_debug", + "drkaiser", + "satasii", + "atahpt", + "atavia", + "atapromise", + "it8212", + "ft2232_spi", + "serprog", + "buspirate_spi", + "dediprog", + "developerbox", + "ene_lpc", + "rayer_spi", + "pony_spi", + "nicintel", + "nicintel_spi", + "nicintel_eeprom", + "ogp_spi", + "satamv", + "linux_mtd", + "linux_spi", + "lspcon_i2c_spi", + "realtek_mst_i2c_spi", + "usbblaster_spi", + "mstarddc_spi", + "pickit2_spi", + "ch341a_spi", + "digilent_spi", + "jlink_spi", + "ni845x_spi", + "stlinkv3_spi", + }; + for (; prog < PROGRAMMER_INVALID; prog++) { + assert_string_equal(programmer_table[prog].name, prog_names[prog]); + } +} diff --git a/tests/tests.c b/tests/tests.c index 3124607..d2a22a5 100644 --- a/tests/tests.c +++ b/tests/tests.c @@ -46,6 +46,7 @@ const struct CMUnitTest flashrom_tests[] = { cmocka_unit_test(flashbuses_to_text_test_success), + cmocka_unit_test(validate_prog_enumerates_test_success), }; ret |= cmocka_run_group_tests_name("flashrom.c tests", flashrom_tests, NULL, NULL); diff --git a/tests/tests.h b/tests/tests.h index cb905fd..89fc7fa 100644 --- a/tests/tests.h +++ b/tests/tests.h @@ -27,6 +27,7 @@ /* flashrom.c */ void flashbuses_to_text_test_success(void **state); +void validate_prog_enumerates_test_success(void **state); /* spi25.c */ void spi_write_enable_test_success(void **state); -- To view, visit https://review.coreboot.org/c/flashrom/+/47356 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I13efc4561f743edf51326d4b408be8715b630377 Gerrit-Change-Number: 47356 Gerrit-PatchSet: 1 Gerrit-Owner: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-MessageType: newchange

6 8

Change in flashrom[master]: Makefile: Check for last line only from preprocessed output
by Khem Raj (Code Review) Aug. 1, 2024

Aug. 1, 2024

Khem Raj has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/43770 ) Change subject: Makefile: Check for last line only from preprocessed output ...................................................................... Makefile: Check for last line only from preprocessed output This started to fail with glibc 2.32 since glibc added additional attributes to functions in signal.h therefore existing regexp started to fail as it is not able to handle these functions e.g. extern int siginterrupt (int __sig, int __interrupt) __attribute__ ((__nothrow__ , __leaf__)) __attribute__ ((__deprecated__ ("Use sigaction with SA_RESTART instead"))); grep -v '^\#' | grep '"' | cut -f 2 -d'"' bit outside of fd_set selected Use sigaction with SA_RESTART instead arm So changing it to tail -1 | grep '"' | cut -f 2 -d'"' arm Produces the expected result, this was hidden until now Signed-off-by: Khem Raj <raj.khem(a)gmail.com> Change-Id: I123a046e142d54632f12d54e2aa09b0928c02b91 --- M Makefile 1 file changed, 3 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/70/43770/1 diff --git a/Makefile b/Makefile index 803529f..3795681 100644 --- a/Makefile +++ b/Makefile @@ -106,7 +106,7 @@ # IMPORTANT: The following line must be placed before TARGET_OS is ever used # (of course), but should come after any lines setting CC because the line # below uses CC itself. -override TARGET_OS := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E os.h 2>/dev/null | grep -v '^\#' | grep '"' | cut -f 2 -d'"')) +override TARGET_OS := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E os.h 2>/dev/null | tail -1 | grep '"' | cut -f 2 -d'"')) ifeq ($(TARGET_OS), Darwin) override CPPFLAGS += -I/opt/local/include -I/usr/local/include @@ -460,8 +460,8 @@ # IMPORTANT: The following line must be placed before ARCH is ever used # (of course), but should come after any lines setting CC because the line # below uses CC itself. -override ARCH := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E archtest.c 2>/dev/null | grep -v '^\#' | grep '"' | cut -f 2 -d'"')) -override ENDIAN := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E endiantest.c 2>/dev/null | grep -v '^\#')) +override ARCH := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E archtest.c 2>/dev/null | tail -1 | grep '"' | cut -f 2 -d'"')) +override ENDIAN := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E endiantest.c 2>/dev/null | tail -1)) # Disable the internal programmer on unsupported architectures (everything but x86 and mipsel) ifneq ($(ARCH)-little, $(filter $(ARCH),x86 mips)-$(ENDIAN)) -- To view, visit https://review.coreboot.org/c/flashrom/+/43770 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I123a046e142d54632f12d54e2aa09b0928c02b91 Gerrit-Change-Number: 43770 Gerrit-PatchSet: 1 Gerrit-Owner: Khem Raj Gerrit-MessageType: newchange

4 5

Change in flashrom[master]: Add -- to make clean
by Ryan O'Leary (Code Review) Aug. 1, 2024

Aug. 1, 2024

Ryan O'Leary has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/37776 ) Change subject: Add -- to make clean ...................................................................... Add -- to make clean Somehow, I ended up with a file name "-c.d". I probably made it by mistake. This change lets "make clean" be a bit more resilient to files such as these. Change-Id: I2517ffac975f3df75f706350a07f189a98a11b7c Signed-off-by: Ryan O'Leary <ryanoleary(a)google.com> --- M Makefile 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/76/37776/1 diff --git a/Makefile b/Makefile index 518d41b..fa66910 100644 --- a/Makefile +++ b/Makefile @@ -1129,7 +1129,7 @@ # This includes all frontends and libflashrom. # We don't use EXEC_SUFFIX here because we want to clean everything. clean: - rm -f $(PROGRAM) $(PROGRAM).exe libflashrom.a *.o *.d $(PROGRAM).8 $(PROGRAM).8.html $(BUILD_DETAILS_FILE) + rm -f -- $(PROGRAM) $(PROGRAM).exe libflashrom.a *.o *.d $(PROGRAM).8 $(PROGRAM).8.html $(BUILD_DETAILS_FILE) @+$(MAKE) -C util/ich_descriptors_tool/ clean distclean: clean -- To view, visit https://review.coreboot.org/c/flashrom/+/37776 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I2517ffac975f3df75f706350a07f189a98a11b7c Gerrit-Change-Number: 37776 Gerrit-PatchSet: 1 Gerrit-Owner: Ryan O'Leary <ryanoleary(a)google.com> Gerrit-MessageType: newchange

6 8

Change in flashrom[master]: dummyflasher.c: Use programmer logger functions
by Angel Pons (Code Review) April 11, 2024

April 11, 2024

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/46523 ) Change subject: dummyflasher.c: Use programmer logger functions ...................................................................... dummyflasher.c: Use programmer logger functions All but three log messages use the programmer logger. Change the three outliers that were using the chip logger accordingly. Change-Id: Ia8668e05df2da739e6bb4c7d0fddad86e8d054a3 Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M dummyflasher.c 1 file changed, 3 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/23/46523/1 diff --git a/dummyflasher.c b/dummyflasher.c index 6426ad2..d233db4 100644 --- a/dummyflasher.c +++ b/dummyflasher.c @@ -610,7 +610,7 @@ } for (i = 0; i < data->spi_ignorelist_size; i++) { if (writearr[0] == data->spi_ignorelist[i]) { - msg_cdbg("Ignoring ignorelisted SPI command 0x%02x\n", + msg_pdbg("Ignoring ignorelisted SPI command 0x%02x\n", data->spi_ignorelist[i]); /* Return success because the command does not fail, * it is simply ignored. @@ -1050,7 +1050,7 @@ * Search "total_size * 1024" in code. */ flash->chip->total_size = emu_data->emu_chip_size / 1024; - msg_cdbg("%s: set flash->total_size to %dK bytes.\n", __func__, + msg_pdbg("%s: set flash->total_size to %dK bytes.\n", __func__, flash->chip->total_size); /* Update the first count of each of the block_erasers. */ @@ -1061,7 +1061,7 @@ eraser->eraseblocks[0].count = 1; eraser->eraseblocks[0].size = emu_data->emu_chip_size; - msg_cdbg("%s: eraser.size=%d, .count=%d\n", + msg_pdbg("%s: eraser.size=%d, .count=%d\n", __func__, eraser->eraseblocks[0].size, eraser->eraseblocks[0].count); } -- To view, visit https://review.coreboot.org/c/flashrom/+/46523 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ia8668e05df2da739e6bb4c7d0fddad86e8d054a3 Gerrit-Change-Number: 46523 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: newchange

3 3

[S] Change in flashrom[main]: flashchips: Add support for MXIC MX25L3273F
by DZ (Code Review) March 31, 2024

March 31, 2024

Attention is currently required from: Anastasia Klimchuk, Nikolai Artemiev, Stefan Reinauer. Hello Anastasia Klimchuk, Nikolai Artemiev, Stefan Reinauer, build bot (Jenkins), I'd like you to reexamine a change. Please visit https://review.coreboot.org/c/flashrom/+/81562?usp=email to look at the new patch set (#6). Change subject: flashchips: Add support for MXIC MX25L3273F ...................................................................... flashchips: Add support for MXIC MX25L3273F The MX25L3273F has been tested by ch341a programmer : read, write, erase and wp. We have tested --wp-enable, --wp-disable, --wp-list and --wp-range commands for write-protect feature. MX25L3273F datasheet is available at the following URL: https://www.mxic.com.tw/Lists/Datasheet/Attachments/8661/MX25L3273F,%203V,%… Change-Id: I4adaaa796d1db34702e7b0ed8e6fb167a3a5f6d7 Signed-off-by: DanielZhang <danielzhang(a)mxic.com.cn> --- M flashchips.c 1 file changed, 45 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/62/81562/6 -- To view, visit https://review.coreboot.org/c/flashrom/+/81562?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: I4adaaa796d1db34702e7b0ed8e6fb167a3a5f6d7 Gerrit-Change-Number: 81562 Gerrit-PatchSet: 6 Gerrit-Owner: DZ <danielzhang(a)mxic.com.cn> Gerrit-Reviewer: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: Nikolai Artemiev <nartemiev(a)google.com> Gerrit-Reviewer: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Gerrit-Attention: Nikolai Artemiev <nartemiev(a)google.com> Gerrit-Attention: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-MessageType: newpatchset

1 0

[S] Change in flashrom[main]: flashchips: Add support for MXIC MX25L3239E
by DZ (Code Review) March 31, 2024

March 31, 2024

Attention is currently required from: Anastasia Klimchuk, Nikolai Artemiev, Stefan Reinauer. Hello Anastasia Klimchuk, Nikolai Artemiev, Stefan Reinauer, build bot (Jenkins), I'd like you to reexamine a change. Please visit https://review.coreboot.org/c/flashrom/+/81563?usp=email to look at the new patch set (#2). Change subject: flashchips: Add support for MXIC MX25L3239E ...................................................................... flashchips: Add support for MXIC MX25L3239E The MX25L3239E has been tested by ch341a programmer : read, write, erase and wp. We have tested --wp-enable, --wp-disable, --wp-list and --wp-range commands for write-protect feature. MX25L3239E datasheet is available at the following URL: https://www.mxic.com.tw/Lists/Datasheet/Attachments/8613/MX25L3239E,%203V,%… Change-Id: Ic7a848028fe937deb1bf83ef2a9dddf1330334b6 Signed-off-by: DanielZhang <danielzhang(a)mxic.com.cn> --- M flashchips.c M include/flashchips.h 2 files changed, 49 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/63/81563/2 -- To view, visit https://review.coreboot.org/c/flashrom/+/81563?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: Ic7a848028fe937deb1bf83ef2a9dddf1330334b6 Gerrit-Change-Number: 81563 Gerrit-PatchSet: 2 Gerrit-Owner: DZ <danielzhang(a)mxic.com.cn> Gerrit-Reviewer: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: Nikolai Artemiev <nartemiev(a)google.com> Gerrit-Reviewer: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Gerrit-Attention: Nikolai Artemiev <nartemiev(a)google.com> Gerrit-Attention: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-MessageType: newpatchset

1 0

[S] Change in flashrom[main]: classic_cli_manpage.rst: Update doc for custom_rst of raiden_debug_spi
by Anastasia Klimchuk (Code Review) March 30, 2024

March 30, 2024

Anastasia Klimchuk has submitted this change. ( https://review.coreboot.org/c/flashrom/+/81114?usp=email ) Change subject: classic_cli_manpage.rst: Update doc for custom_rst of raiden_debug_spi ...................................................................... classic_cli_manpage.rst: Update doc for custom_rst of raiden_debug_spi Update technical details for custom_rst of raiden_debug_spi to help users better understand their configuration options. BUG=b:161745002 BRANCH=none TEST=`meson compile -C testdir` and view ./testdir/doc/html/classic_cli_manpage.html Change-Id: Ie2b084a3ed9bf40f91bfa81dbc95ec69d99d5ad0 Signed-off-by: Hsuan Ting Chen <roccochen(a)chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/81114 Reviewed-by: Anastasia Klimchuk <aklm(a)chromium.org> Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> --- M doc/classic_cli_manpage.rst 1 file changed, 10 insertions(+), 2 deletions(-) Approvals: Anastasia Klimchuk: Looks good to me, approved build bot (Jenkins): Verified diff --git a/doc/classic_cli_manpage.rst b/doc/classic_cli_manpage.rst index c46edf6..f40d19e 100644 --- a/doc/classic_cli_manpage.rst +++ b/doc/classic_cli_manpage.rst @@ -899,11 +899,19 @@ The servo device serial number can be found via ``lsusb``. Raiden will poll the ``ap`` target waiting for the system power to settle on the AP and EC flash devices. -The optional ``custom_rst=true`` parameter changes the timeout value from 3ms to 10ms:: +The optional ``custom_rst=true`` parameter alters the behavior of the reset process:: flashrom -p raiden_debug_spi:custom_rst=<true|false> -syntax, where ``custom_rst=false`` is the implicit default timeout of 3ms. More information about the ChromiumOS servo +syntax, where: + +``custom_rst=false`` is the implicit default timeout of 3ms + +and ``custom_rst=true`` set ``RAIDEN_DEBUG_SPI_REQ_ENABLE_AP_CUSTOM`` instead of ``RAIDEN_DEBUG_SPI_REQ_ENABLE_AP``. +This custom reset will modify the timeout from 3ms to 10ms and will not set ``EC_RST_L``, meaning neither the EC nor the AP will be reset. With this setting, it's the user's responsibility to manage the reset signal manually or by configuring the GPIO. +Failure to handle the reset signal appropriately will likely result in flashing errors. + +More information about the ChromiumOS servo hardware is available at `servos website <https://chromium.googlesource.com/chromiumos/third_party/hdctools/+/HEAD/do…>`_. -- To view, visit https://review.coreboot.org/c/flashrom/+/81114?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: main Gerrit-Change-Id: Ie2b084a3ed9bf40f91bfa81dbc95ec69d99d5ad0 Gerrit-Change-Number: 81114 Gerrit-PatchSet: 4 Gerrit-Owner: Hsuan-ting Chen <roccochen(a)google.com> Gerrit-Reviewer: Anastasia Klimchuk <aklm(a)chromium.org> Gerrit-Reviewer: Hsuan Ting Chen <roccochen(a)chromium.org> Gerrit-Reviewer: Thomas Heijligen <src(a)posteo.de> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-MessageType: merged

1 0