September 2020 - flashrom-gerrit

Change in flashrom[master]: pcidev: On arm64 we are not getting a valid BAR0 address
by Martijn Berger (Code Review) Sept. 13, 2025

Sept. 13, 2025

Martijn Berger has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/39965 ) Change subject: pcidev: On arm64 we are not getting a valid BAR0 address ...................................................................... pcidev: On arm64 we are not getting a valid BAR0 address It seems that there is some code to work around a possible bug in old versions of libpci. This trusts libpci if it is new enough Change-Id: I8bd32c6344b0831a949c3853abeb84905420922a Signed-off-by: Martijn Berger <martijn.berger(a)gmail.com> --- M pcidev.c M programmer.h 2 files changed, 30 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/65/39965/1 diff --git a/pcidev.c b/pcidev.c index 54c1fd3..973acde 100644 --- a/pcidev.c +++ b/pcidev.c @@ -30,20 +30,47 @@ TYPE_UNKNOWN }; +int pci_bar_nuber_from_offset(int offset) +{ + switch (offset) { + case PCI_BASE_ADDRESS_0: + return 0; + case PCI_BASE_ADDRESS_1: + return 1; + case PCI_BASE_ADDRESS_2: + return 2; + case PCI_BASE_ADDRESS_3: + return 3; + case PCI_BASE_ADDRESS_4: + return 4; + case PCI_BASE_ADDRESS_5: + return 5; + default: + return -1; + } + return -1; +} + uintptr_t pcidev_readbar(struct pci_dev *dev, int bar) { uint64_t addr; uint32_t upperaddr; uint8_t headertype; uint16_t supported_cycles; + int bar_number; enum pci_bartype bartype = TYPE_UNKNOWN; headertype = pci_read_byte(dev, PCI_HEADER_TYPE) & 0x7f; msg_pspew("PCI header type 0x%02x\n", headertype); + bar_number = pci_bar_nuber_from_offset(bar); - /* Don't use dev->base_addr[x] (as value for 'bar'), won't work on older libpci. */ - addr = pci_read_long(dev, bar); + if (PCI_LIB_VERSION >= 0x030500 && bar_number > -1) { + addr = dev->base_addr[bar_number]; + } else { + /* Don't use dev->base_addr[x] (as value for 'bar'), won't work on older libpci. */ + addr = pci_read_long(dev, bar); + } /* Sanity checks. */ switch (headertype) { diff --git a/programmer.h b/programmer.h index 9a41be1..5d4c1d7 100644 --- a/programmer.h +++ b/programmer.h @@ -190,6 +190,7 @@ // FIXME: This needs to be local, not global(?) extern struct pci_access *pacc; int pci_init_common(void); +int pci_bar_nuber_from_offset(int offset); uintptr_t pcidev_readbar(struct pci_dev *dev, int bar); struct pci_dev *pcidev_init(const struct dev_entry *devs, int bar); /* rpci_write_* are reversible writes. The original PCI config space register -- To view, visit https://review.coreboot.org/c/flashrom/+/39965 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I8bd32c6344b0831a949c3853abeb84905420922a Gerrit-Change-Number: 39965 Gerrit-PatchSet: 1 Gerrit-Owner: Martijn Berger Gerrit-MessageType: newchange

5 6

Change in flashrom[master]: libflashrom.map: Add missing symbols
by Edward O'Callaghan (Code Review) April 7, 2025

April 7, 2025

Edward O'Callaghan has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/38993 ) Change subject: libflashrom.map: Add missing symbols ...................................................................... libflashrom.map: Add missing symbols The following symbols were missing at link-time from libflashrom: supported_flash_chips; supported_boards; supported_chipsets; Change-Id: I299928d62788c0abfe7f6cdd3e8ad8be0c49e45e Signed-off-by: Edward O'Callaghan <quasisec(a)google.com> --- M libflashrom.map 1 file changed, 3 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/93/38993/1 diff --git a/libflashrom.map b/libflashrom.map index d6dd24d..9430775 100644 --- a/libflashrom.map +++ b/libflashrom.map @@ -25,6 +25,9 @@ flashrom_set_log_callback; flashrom_shutdown; flashrom_supported_programmers; + flashrom_supported_flash_chips; + flashrom_supported_boards; + flashrom_supported_chipsets; flashrom_system_info; flashrom_version_info; local: *; -- To view, visit https://review.coreboot.org/c/flashrom/+/38993 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I299928d62788c0abfe7f6cdd3e8ad8be0c49e45e Gerrit-Change-Number: 38993 Gerrit-PatchSet: 1 Gerrit-Owner: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-MessageType: newchange

4 3

Change in flashrom[master]: Makefile: Check for last line only from preprocessed output
by Khem Raj (Code Review) Aug. 1, 2024

Aug. 1, 2024

Khem Raj has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/43770 ) Change subject: Makefile: Check for last line only from preprocessed output ...................................................................... Makefile: Check for last line only from preprocessed output This started to fail with glibc 2.32 since glibc added additional attributes to functions in signal.h therefore existing regexp started to fail as it is not able to handle these functions e.g. extern int siginterrupt (int __sig, int __interrupt) __attribute__ ((__nothrow__ , __leaf__)) __attribute__ ((__deprecated__ ("Use sigaction with SA_RESTART instead"))); grep -v '^\#' | grep '"' | cut -f 2 -d'"' bit outside of fd_set selected Use sigaction with SA_RESTART instead arm So changing it to tail -1 | grep '"' | cut -f 2 -d'"' arm Produces the expected result, this was hidden until now Signed-off-by: Khem Raj <raj.khem(a)gmail.com> Change-Id: I123a046e142d54632f12d54e2aa09b0928c02b91 --- M Makefile 1 file changed, 3 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/70/43770/1 diff --git a/Makefile b/Makefile index 803529f..3795681 100644 --- a/Makefile +++ b/Makefile @@ -106,7 +106,7 @@ # IMPORTANT: The following line must be placed before TARGET_OS is ever used # (of course), but should come after any lines setting CC because the line # below uses CC itself. -override TARGET_OS := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E os.h 2>/dev/null | grep -v '^\#' | grep '"' | cut -f 2 -d'"')) +override TARGET_OS := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E os.h 2>/dev/null | tail -1 | grep '"' | cut -f 2 -d'"')) ifeq ($(TARGET_OS), Darwin) override CPPFLAGS += -I/opt/local/include -I/usr/local/include @@ -460,8 +460,8 @@ # IMPORTANT: The following line must be placed before ARCH is ever used # (of course), but should come after any lines setting CC because the line # below uses CC itself. -override ARCH := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E archtest.c 2>/dev/null | grep -v '^\#' | grep '"' | cut -f 2 -d'"')) -override ENDIAN := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E endiantest.c 2>/dev/null | grep -v '^\#')) +override ARCH := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E archtest.c 2>/dev/null | tail -1 | grep '"' | cut -f 2 -d'"')) +override ENDIAN := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E endiantest.c 2>/dev/null | tail -1)) # Disable the internal programmer on unsupported architectures (everything but x86 and mipsel) ifneq ($(ARCH)-little, $(filter $(ARCH),x86 mips)-$(ENDIAN)) -- To view, visit https://review.coreboot.org/c/flashrom/+/43770 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I123a046e142d54632f12d54e2aa09b0928c02b91 Gerrit-Change-Number: 43770 Gerrit-PatchSet: 1 Gerrit-Owner: Khem Raj Gerrit-MessageType: newchange

4 5

Change in flashrom[master]: Add -- to make clean
by Ryan O'Leary (Code Review) Aug. 1, 2024

Aug. 1, 2024

Ryan O'Leary has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/37776 ) Change subject: Add -- to make clean ...................................................................... Add -- to make clean Somehow, I ended up with a file name "-c.d". I probably made it by mistake. This change lets "make clean" be a bit more resilient to files such as these. Change-Id: I2517ffac975f3df75f706350a07f189a98a11b7c Signed-off-by: Ryan O'Leary <ryanoleary(a)google.com> --- M Makefile 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/76/37776/1 diff --git a/Makefile b/Makefile index 518d41b..fa66910 100644 --- a/Makefile +++ b/Makefile @@ -1129,7 +1129,7 @@ # This includes all frontends and libflashrom. # We don't use EXEC_SUFFIX here because we want to clean everything. clean: - rm -f $(PROGRAM) $(PROGRAM).exe libflashrom.a *.o *.d $(PROGRAM).8 $(PROGRAM).8.html $(BUILD_DETAILS_FILE) + rm -f -- $(PROGRAM) $(PROGRAM).exe libflashrom.a *.o *.d $(PROGRAM).8 $(PROGRAM).8.html $(BUILD_DETAILS_FILE) @+$(MAKE) -C util/ich_descriptors_tool/ clean distclean: clean -- To view, visit https://review.coreboot.org/c/flashrom/+/37776 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I2517ffac975f3df75f706350a07f189a98a11b7c Gerrit-Change-Number: 37776 Gerrit-PatchSet: 1 Gerrit-Owner: Ryan O'Leary <ryanoleary(a)google.com> Gerrit-MessageType: newchange

6 8

Change in flashrom[master]: dediprog: Fix SF600 4BA mode
by Patrick Rudolph (Code Review) Nov. 25, 2023

Nov. 25, 2023

Hello Patrick Rudolph, I'd like you to do a code review. Please visit https://review.coreboot.org/c/flashrom/+/34629 to review the following change. Change subject: dediprog: Fix SF600 4BA mode ...................................................................... dediprog: Fix SF600 4BA mode Flash chips greater than 16MiB require 4BA mode support. Current master doesn't support such mode as the SF600 uses PROTOCOL_V3. Fix protocol version check to support 4BA on PROTOCOL_V3, too. Tested on SF600 V:7.2.45 Able to read and write "IS25WP256" (32768 kB, SPI). Change-Id: I2d3089693fbd2f8f7717a8f71be242be131ce707 Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M dediprog.c 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/29/34629/1 diff --git a/dediprog.c b/dediprog.c index 3566109..add478d 100644 --- a/dediprog.c +++ b/dediprog.c @@ -1160,7 +1160,7 @@ if (dediprog_devicetype == DEV_SF100 && protocol() == PROTOCOL_V1) spi_master_dediprog.features &= ~SPI_MASTER_NO_4BA_MODES; - if (protocol() == PROTOCOL_V2) + if (protocol() >= PROTOCOL_V2) spi_master_dediprog.features |= SPI_MASTER_4BA; if (register_spi_master(&spi_master_dediprog) || dediprog_set_leds(LED_NONE)) -- To view, visit https://review.coreboot.org/c/flashrom/+/34629 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I2d3089693fbd2f8f7717a8f71be242be131ce707 Gerrit-Change-Number: 34629 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <siro(a)das-labor.org> Gerrit-Reviewer: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

4 7

Change in flashrom[master]: flashchips: Add ISSI IS25LQ016
by Angel Pons (Code Review) Aug. 15, 2023

Aug. 15, 2023

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/40431 ) Change subject: flashchips: Add ISSI IS25LQ016 ...................................................................... flashchips: Add ISSI IS25LQ016 Datasheet: http://www.issi.com/WW/pdf/25LQ016.pdf Tested all four PREW functions with a FT2232H. Change-Id: I02f19767b8a60fb2d37adab34894b6edb6ac4494 Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M flashchips.c M flashchips.h 2 files changed, 39 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/31/40431/1 diff --git a/flashchips.c b/flashchips.c index b4006df..a25f915 100644 --- a/flashchips.c +++ b/flashchips.c @@ -7049,6 +7049,44 @@ { .vendor = "ISSI", + .name = "IS25LQ016", + .bustype = BUS_SPI, + .manufacture_id = ISSI_ID_SPI, + .model_id = ISSI_IS25LQ016, + .total_size = 2048, + .page_size = 256, + /* OTP: 1024B total; read 0x4b; write 0xb1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2300, 3600}, + }, + + { + .vendor = "ISSI", .name = "IS25WP032", .bustype = BUS_SPI, .manufacture_id = ISSI_ID_SPI, diff --git a/flashchips.h b/flashchips.h index e5ef390..b5c0aeb 100644 --- a/flashchips.h +++ b/flashchips.h @@ -459,6 +459,7 @@ #define ISSI_IS25LP064 0x6017 #define ISSI_IS25LP128 0x6018 #define ISSI_IS25LP256 0x6019 +#define ISSI_IS25LQ016 0x1445 #define ISSI_IS25WP032 0x7016 #define ISSI_IS25WP064 0x7017 #define ISSI_IS25WP128 0x7018 -- To view, visit https://review.coreboot.org/c/flashrom/+/40431 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I02f19767b8a60fb2d37adab34894b6edb6ac4494 Gerrit-Change-Number: 40431 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: newchange

6 8

Change in flashrom[master]: flashchips: Added missing voltages
by Name of user not set (Code Review) June 2, 2023

June 2, 2023

roman.stingler(a)gmail.com has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/40432 ) Change subject: flashchips: Added missing voltages ...................................................................... flashchips: Added missing voltages Signed-off-by: Roman Stingler <roman.stingler(a)gmail.com> Change-Id: I0825ab11e53c0b018b49173907e2b274a4cf1fab --- M flashchips.c 1 file changed, 9 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/32/40432/1 diff --git a/flashchips.c b/flashchips.c index b4006df..f2d9fc1 100644 --- a/flashchips.c +++ b/flashchips.c @@ -7650,6 +7650,7 @@ }, .write = write_82802ab, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -7677,6 +7678,7 @@ }, .write = write_82802ab, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -7704,6 +7706,7 @@ }, .write = write_82802ab, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -7727,6 +7730,7 @@ .unlock = unlock_28f004s5, .write = write_82802ab, .read = read_memmapped, + .voltage = {2700, 3600}, }, { @@ -7755,6 +7759,7 @@ }, .write = write_82802ab, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -7783,6 +7788,7 @@ }, .write = write_82802ab, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -9972,6 +9978,7 @@ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, + .voltage = {2700, 3600}, }, { @@ -17550,6 +17557,7 @@ }, .write = write_jedec, .read = read_memmapped, + .voltage = {4500, 5500}, }, { @@ -17573,6 +17581,7 @@ }, .write = write_jedec, .read = read_memmapped, + .voltage = {4500, 5500}, }, { -- To view, visit https://review.coreboot.org/c/flashrom/+/40432 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I0825ab11e53c0b018b49173907e2b274a4cf1fab Gerrit-Change-Number: 40432 Gerrit-PatchSet: 1 Gerrit-Owner: roman.stingler(a)gmail.com Gerrit-MessageType: newchange

4 6

Change in flashrom[master]: buspirate: Add option for setting the aux pin
by Sean Anderson (Code Review) April 13, 2023

April 13, 2023

Sean Anderson has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/43608 ) Change subject: buspirate: Add option for setting the aux pin ...................................................................... buspirate: Add option for setting the aux pin This adds a parameter to drive the aux pin low (or high if you explicitly want the previous behavior). Some boards need to have a reset pin driven low before the firmware can be safely flashed. With the Bus Pirate, this is most easily done with the auxiliary pin. Change-Id: Ieeecfdf1afc06dadda9b8f99547cd74854ca6775 Signed-off-by: Sean Anderson <seanga2(a)gmail.com> --- M buspirate_spi.c M flashrom.8.tmpl 2 files changed, 33 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/08/43608/1 diff --git a/buspirate_spi.c b/buspirate_spi.c index fdfc0e4..1ccb107 100644 --- a/buspirate_spi.c +++ b/buspirate_spi.c @@ -228,6 +228,7 @@ int serialspeed_index = -1; int ret = 0; int pullup = 0; + int aux = 1; dev = extract_programmer_param("dev"); if (dev && !strlen(dev)) { @@ -277,6 +278,17 @@ } free(tmp); + tmp = extract_programmer_param("aux"); + if (tmp) { + if (strcasecmp("high", tmp) == 0) + ; /* Default */ + else if (strcasecmp("low", tmp) == 0) + aux = 0; + else + msg_perr("Invalid AUX state, driving high by default.\n"); + } + free(tmp); + /* Default buffer size is 19: 16 bytes data, 3 bytes control. */ #define DEFAULT_BUFSIZE (16 + 3) bp_commbuf = malloc(DEFAULT_BUFSIZE); @@ -520,11 +532,18 @@ } /* Initial setup (SPI peripherals config): Enable power, CS high, AUX */ - bp_commbuf[0] = 0x40 | 0x0b; + bp_commbuf[0] = 0x40 | 0x09; if (pullup == 1) { bp_commbuf[0] |= (1 << 2); msg_pdbg("Enabling pull-up resistors.\n"); } + if (aux) { + bp_commbuf[0] |= (1 << 1); + msg_pdbg("Driving AUX high.\n"); + } else { + msg_pdbg("Driving AUX low.\n"); + } + ret = buspirate_sendrecv(bp_commbuf, 1, 1); if (ret) return 1; diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl index db50d59..caf860c 100644 --- a/flashrom.8.tmpl +++ b/flashrom.8.tmpl @@ -902,6 +902,19 @@ .URLB "http://dangerousprototypes.com/docs/Practical_guide_to_Bus_Pirate_pull-up_r…" \ "in a guide by dangerousprototypes" . Only the external supply voltage (Vpu) is supported as of this writing. +.sp +An optional aux parameter specifies the state of the Bus Pirate auxiliary pin. +This may be used to drive the auxiliary pin high or low before a transfer. +Syntax is +.sp +.B " flashrom -p buspirate_spi:aux=state" +.sp +where +.B state +can be +.BR high " or " low . +The default +.BR state " is " high . .SS .BR "pickit2_spi " programmer .IP -- To view, visit https://review.coreboot.org/c/flashrom/+/43608 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ieeecfdf1afc06dadda9b8f99547cd74854ca6775 Gerrit-Change-Number: 43608 Gerrit-PatchSet: 1 Gerrit-Owner: Sean Anderson <seanga2(a)gmail.com> Gerrit-MessageType: newchange

6 14

Change in ...flashrom[master]: cli_classic: Report the gathered layout entries at level dbg
by Nico Huber (Code Review) Nov. 4, 2022

Nov. 4, 2022

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/31012 Change subject: cli_classic: Report the gathered layout entries at level dbg ...................................................................... cli_classic: Report the gathered layout entries at level dbg Change-Id: I7678ba5138f0d722ee44747fe123f192abdd0ffd Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M cli_classic.c M layout.c M layout.h 3 files changed, 18 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/12/31012/1 diff --git a/cli_classic.c b/cli_classic.c index ced08c6..536ef24 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -645,6 +645,8 @@ goto out_shutdown; } + report_layout(layout); + flashrom_layout_set(fill_flash, layout); flashrom_flag_set(fill_flash, FLASHROM_FLAG_FORCE, !!force); #if CONFIG_INTERNAL == 1 diff --git a/layout.c b/layout.c index fa66238..c589d17 100644 --- a/layout.c +++ b/layout.c @@ -229,3 +229,17 @@ return ret; } + +void report_layout(const struct flashrom_layout *const l) +{ + unsigned int i; + + if (!l) + return; + + msg_gdbg("Gathered %zu layout entries:\n", l->num_entries); + for (i = 0; i < l->num_entries; ++i) { + msg_gdbg("%08"PRIx32":%08"PRIx32" %s\n", + l->entries[i].start, l->entries[i].end, l->entries[i].name); + } +} diff --git a/layout.h b/layout.h index eb54a4f..61311bc 100644 --- a/layout.h +++ b/layout.h @@ -59,4 +59,6 @@ int process_include_args(struct flashrom_layout *); +void report_layout(const struct flashrom_layout *); + #endif /* !__LAYOUT_H__ */ -- To view, visit https://review.coreboot.org/c/flashrom/+/31012 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I7678ba5138f0d722ee44747fe123f192abdd0ffd Gerrit-Change-Number: 31012 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

5 19

Change in flashrom[master]: flashchips: Fix W25Q256.W
by Patrick Rudolph (Code Review) May 26, 2022

May 26, 2022

Hello Patrick Rudolph, I'd like you to do a code review. Please visit https://review.coreboot.org/c/flashrom/+/44810 to review the following change. Change subject: flashchips: Fix W25Q256.W ...................................................................... flashchips: Fix W25Q256.W Used the datasheet from here: https://www.winbond.com/resource-files/w25q256jw%20spi%20revb%2012082017.pdf The chips supports all native 4BA instructions. Change-Id: I9a3995c66ad7b74823e17984bf1ffac50b5663e0 Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M flashchips.c 1 file changed, 8 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/10/44810/1 diff --git a/flashchips.c b/flashchips.c index 8b5b5cc..2c16f89 100644 --- a/flashchips.c +++ b/flashchips.c @@ -16854,8 +16854,8 @@ .page_size = 256, /* supports SFDP */ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_ENTER_WREN - | FEATURE_4BA_EXT_ADDR | FEATURE_4BA_READ | FEATURE_4BA_FAST_READ, + /* FOUR_BYTE_ADDR: supports 4-bytes addressing mode */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -16863,12 +16863,18 @@ { { .eraseblocks = { {4 * 1024, 8192} }, + .block_erase = spi_block_erase_21, + }, { + .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 1024} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 512} }, + .block_erase = spi_block_erase_dc, + }, { + .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32 * 1024 * 1024, 1} }, -- To view, visit https://review.coreboot.org/c/flashrom/+/44810 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I9a3995c66ad7b74823e17984bf1ffac50b5663e0 Gerrit-Change-Number: 44810 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <siro(a)das-labor.org> Gerrit-Reviewer: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

5 10