July 2019 - flashrom-gerrit - mail.coreboot.org

Change in flashrom[master]: dediprog: Fix SF600 4BA mode
by Patrick Rudolph (Code Review) Aug. 29, 2026

Aug. 29, 2026

Hello Patrick Rudolph, I'd like you to do a code review. Please visit https://review.coreboot.org/c/flashrom/+/34629 to review the following change. Change subject: dediprog: Fix SF600 4BA mode ...................................................................... dediprog: Fix SF600 4BA mode Flash chips greater than 16MiB require 4BA mode support. Current master doesn't support such mode as the SF600 uses PROTOCOL_V3. Fix protocol version check to support 4BA on PROTOCOL_V3, too. Tested on SF600 V:7.2.45 Able to read and write "IS25WP256" (32768 kB, SPI). Change-Id: I2d3089693fbd2f8f7717a8f71be242be131ce707 Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M dediprog.c 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/29/34629/1 diff --git a/dediprog.c b/dediprog.c index 3566109..add478d 100644 --- a/dediprog.c +++ b/dediprog.c @@ -1160,7 +1160,7 @@ if (dediprog_devicetype == DEV_SF100 && protocol() == PROTOCOL_V1) spi_master_dediprog.features &= ~SPI_MASTER_NO_4BA_MODES; - if (protocol() == PROTOCOL_V2) + if (protocol() >= PROTOCOL_V2) spi_master_dediprog.features |= SPI_MASTER_4BA; if (register_spi_master(&spi_master_dediprog) || dediprog_set_leds(LED_NONE)) -- To view, visit https://review.coreboot.org/c/flashrom/+/34629 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I2d3089693fbd2f8f7717a8f71be242be131ce707 Gerrit-Change-Number: 34629 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <siro(a)das-labor.org> Gerrit-Reviewer: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

4 8

Change in flashrom[master]: Add support for continuous SPI reads
by Edward O'Callaghan (Code Review) Aug. 29, 2026

Aug. 29, 2026

Edward O'Callaghan has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/34584 ) Change subject: Add support for continuous SPI reads ...................................................................... Add support for continuous SPI reads Forward port the original patch from Duncan Laurie <dlaurie(a)chromium.org> in commit 06ffd5263892061c5ebf46e52b7878786cf2cece so that it fits for upstream consumption. This patch adds support for "unbounded reads" which are for continous reads to a SPI flash chip instead of reading in page size blocks. This speeds up the flash process over FTDI by quite a bit, testing the read of a 16MB part it goes from 2m11s to 0m15s. Change-Id: I804545aeb1b827ffdd41b21024fd618475e8263a Signed-off-by: Edward O'Callaghan <quasisec(a)chromium.org> --- M chipdrivers.h M flash.h M spi.c M spi25.c 4 files changed, 40 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/84/34584/1 diff --git a/chipdrivers.h b/chipdrivers.h index e380878..77e1943 100644 --- a/chipdrivers.h +++ b/chipdrivers.h @@ -55,6 +55,7 @@ int spi_chip_write_1(struct flashctx *flash, const uint8_t *buf, unsigned int start, unsigned int len); int spi_nbyte_read(struct flashctx *flash, unsigned int addr, uint8_t *bytes, unsigned int len); int spi_read_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize); +int spi_read_unbound(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize); int spi_write_chunked(struct flashctx *flash, const uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize); int spi_enter_4ba(struct flashctx *flash); int spi_exit_4ba(struct flashctx *flash); diff --git a/flash.h b/flash.h index b60a980..981f88b 100644 --- a/flash.h +++ b/flash.h @@ -143,6 +143,8 @@ #define ERASED_VALUE(flash) (((flash)->chip->feature_bits & FEATURE_ERASED_ZERO) ? 0x00 : 0xff) +#define FEATURE_UNBOUND_READ (1 << 19) + enum test_state { OK = 0, NT = 1, /* Not tested */ diff --git a/spi.c b/spi.c index 489baf3..23f4cfe 100644 --- a/spi.c +++ b/spi.c @@ -75,13 +75,18 @@ unsigned int len) { unsigned int max_data = flash->mst->spi.max_data_read; + int rc; if (max_data == MAX_DATA_UNSPECIFIED) { msg_perr("%s called, but SPI read chunk size not defined " "on this hardware. Please report a bug at " "flashrom(a)flashrom.org\n", __func__); return 1; } - return spi_read_chunked(flash, buf, start, len, max_data); + if (flash->feature_bits & FEATURE_UNBOUND_READ) + rc = spi_read_unbound(flash, buf, start, len, max_data); + else + rc = spi_read_chunked(flash, buf, start, len, max_data); + return rc; } int default_spi_write_256(struct flashctx *flash, const uint8_t *buf, unsigned int start, unsigned int len) diff --git a/spi25.c b/spi25.c index 2a1d492..3327110 100644 --- a/spi25.c +++ b/spi25.c @@ -659,6 +659,37 @@ } /* + * Read a part of the flash chip. + * Ignore pages and read the data continuously, the only bound is the chunksize. + */ +int spi_read_unbound(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize) +{ + int rc = 0; + unsigned int i; + + for (i = start; i < (start + len); i += chunksize) { + int chunk_status = 0; + unsigned int toread = min(chunksize, start + len - i); + + chunk_status = spi_nbyte_read(flash, i, buf + (i - start), toread); + if (chunk_status) { + if (ignore_error(chunk_status)) { + /* fill this chunk with 0xff bytes and + let caller know about the error */ + memset(buf + (i - start), 0xff, toread); + rc = chunk_status; + continue; + } else { + rc = chunk_status; + break; + } + } + } + + return rc; +} + +/* * Write a part of the flash chip. * FIXME: Use the chunk code from Michael Karcher instead. * Each page is written separately in chunks with a maximum size of chunksize. -- To view, visit https://review.coreboot.org/c/flashrom/+/34584 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I804545aeb1b827ffdd41b21024fd618475e8263a Gerrit-Change-Number: 34584 Gerrit-PatchSet: 1 Gerrit-Owner: Edward O'Callaghan <quasisec(a)chromium.org> Gerrit-MessageType: newchange

3 5

Change in ...flashrom[master]: Add "--dangerous-bruteforce" mode for the unreliable ISP environments
by mikeb mikeb (Code Review) Aug. 29, 2026

Aug. 29, 2026

Hello Mike Banon, I'd like you to do a code review. Please visit https://review.coreboot.org/c/flashrom/+/31830 to review the following change. Change subject: Add "--dangerous-bruteforce" mode for the unreliable ISP environments ...................................................................... Add "--dangerous-bruteforce" mode for the unreliable ISP environments Some in-system-programming environments are very unreliable, e.g. when you connect a SOIC8 test clip to the flash chip of WR841ND v9 wireless router: because the low power SOC of this router becomes powered and is constantly trying to boot, the router's flash chip is correctly detected only 30% of times, and when it is detected just 30% of the read operations are successful - the rest result in zeroes or garbage data being read from a flash chip. While in this new "--dangerous-bruteforce" mode, flashrom will be constantly probing for a flash chip until it is correctly detected - and then, depending on the operation selected by a user, at the moments of chip availability it will be reading or writing by the small chunks of 256 bytes maximum size, verifying each small chunk and retrying the operation until the success or timeout (~ 60 sec). Constant probing between the small chunk operations is also being done - to avoid a possible situation where we have got two identical blocks of zeroes while reading a chunk and erroneously accepted it. Currently this mode is active only for those SPI25 chips which are ".write = spi_chip_write_256" and ".read = spi_chip_read", but later could be expanded to more functions to become useful for more chips. NOTE: this mode is experimental! Also, some targets like WR841ND v9 could block the ISP chip access completely if there is no bootable firmware inside (e.g. after you've tried to erase the chip contents). In such a situation it could be hard to recover the firmware without desoldering a flash chip and flashing it separately. Please do not erase or write to a flash chip using this mode if you are not sure. Signed-off-by: Mike Banon <mikebdp2(a)gmail.com> Change-Id: If47476793721a0061fd65bc6d1f98d48b03dc6c1 --- M cli_classic.c M flash.h M flashrom.c M libflashrom.c M libflashrom.h M spi25.c 6 files changed, 148 insertions(+), 15 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/30/31830/1 diff --git a/cli_classic.c b/cli_classic.c index ced08c6..454df2b 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -51,6 +51,7 @@ " -V | --verbose more verbose output\n" " -c | --chip <chipname> probe only for specified flash chip\n" " -f | --force force specific operations (see man page)\n" + " --dangerous-bruteforce verify each small chunk and probe constantly\n" " -n | --noverify don't auto-verify\n" " -N | --noverify-all verify included regions only (cf. -i)\n" " -l | --layout <layoutfile> read ROM layout from <layoutfile>\n" @@ -104,7 +105,7 @@ #if CONFIG_PRINT_WIKI == 1 int list_supported_wiki = 0; #endif - int read_it = 0, write_it = 0, erase_it = 0, verify_it = 0; + int read_it = 0, write_it = 0, erase_it = 0, verify_it = 0, bruteforce = 0, timeout = 30000; int dont_verify_it = 0, dont_verify_all = 0, list_supported = 0, operation_specified = 0; struct flashrom_layout *layout = NULL; enum programmer prog = PROGRAMMER_INVALID; @@ -113,6 +114,7 @@ OPTION_FMAP, OPTION_FMAP_FILE, OPTION_FLASH_CONTENTS, + OPTION_BRUTEFORCE, }; int ret = 0; @@ -127,6 +129,7 @@ {"chip", 1, NULL, 'c'}, {"verbose", 0, NULL, 'V'}, {"force", 0, NULL, 'f'}, + {"dangerous-bruteforce", 0, NULL, OPTION_BRUTEFORCE}, {"layout", 1, NULL, 'l'}, {"ifd", 0, NULL, OPTION_IFD}, {"fmap", 0, NULL, OPTION_FMAP}, @@ -228,6 +231,9 @@ case 'f': force = 1; break; + case OPTION_BRUTEFORCE: + bruteforce = 1; + break; case 'l': if (layoutfile) { fprintf(stderr, "Error: --layout specified " @@ -503,16 +509,27 @@ msg_pdbg("The following protocols are supported: %s.\n", tempstr); free(tempstr); - for (j = 0; j < registered_master_count; j++) { - startchip = 0; - while (chipcount < ARRAY_SIZE(flashes)) { - startchip = probe_flash(&registered_masters[j], startchip, &flashes[chipcount], 0); - if (startchip == -1) - break; - chipcount++; - startchip++; + do { + chipcount = 0; + for (j = 0; j < registered_master_count; j++) { + startchip = 0; + while (chipcount < ARRAY_SIZE(flashes)) { + startchip = probe_flash(&registered_masters[j], startchip, &flashes[chipcount], 0); + if (startchip == -1) + break; + chipcount++; + startchip++; + } } - } + timeout--; + if (!timeout) { + msg_cerr("Error: Timed out trying to detect a chip.\n"); + ret = 1; + goto out_shutdown; + } + } while (bruteforce && ( !chipcount || // wait for the correct chip detection + ((flashes[0].chip->manufacture_id == GENERIC_MANUF_ID) || + (flashes[0].chip->model_id == GENERIC_DEVICE_ID)) ) ); if (chipcount > 1) { msg_cinfo("Multiple flash chip definitions match the detected chip(s): \"%s\"", @@ -650,6 +667,7 @@ #if CONFIG_INTERNAL == 1 flashrom_flag_set(fill_flash, FLASHROM_FLAG_FORCE_BOARDMISMATCH, !!force_boardmismatch); #endif + flashrom_flag_set(fill_flash, FLASHROM_FLAG_BRUTEFORCE, !!bruteforce); flashrom_flag_set(fill_flash, FLASHROM_FLAG_VERIFY_AFTER_WRITE, !dont_verify_it); flashrom_flag_set(fill_flash, FLASHROM_FLAG_VERIFY_WHOLE_CHIP, !dont_verify_all); diff --git a/flash.h b/flash.h index 911214c..6ba116e 100644 --- a/flash.h +++ b/flash.h @@ -256,6 +256,7 @@ struct { bool force; bool force_boardmismatch; + bool bruteforce; bool verify_after_write; bool verify_whole_chip; } flags; diff --git a/flashrom.c b/flashrom.c index e82c32e..8f2c859 100644 --- a/flashrom.c +++ b/flashrom.c @@ -1641,6 +1641,8 @@ size_t i, j; bool first = true; struct block_eraser *const eraser = &flashctx->chip->block_erasers[erasefunction]; + unsigned int bruteforce = flashrom_flag_get(flashctx, FLASHROM_FLAG_BRUTEFORCE); + int timeout; info->erase_start = 0; for (i = 0; i < NUM_ERASEREGIONS; ++i) { @@ -1662,9 +1664,34 @@ msg_cdbg(", "); msg_cdbg("0x%06x-0x%06x:", info->erase_start, info->erase_end); - ret = per_blockfn(flashctx, info, eraser->block_erase); - if (ret) - return ret; + if (!bruteforce) { + ret = per_blockfn(flashctx, info, eraser->block_erase); + if (ret) + return ret; + } else { + timeout = 30000; + while(1) { + timeout--; + if (!timeout) { + msg_cerr("%s timeout during command execution\n", __func__); + return 2; + } + + /* First probe. */ + if (flashctx->chip->probe(flashctx) != 1) + continue; + + ret = per_blockfn(flashctx, info, eraser->block_erase); + if (ret) + continue; + + /* Second probe. */ + if (flashctx->chip->probe(flashctx) != 1) + continue; + + break; + } + } } if (info->region_end < info->erase_start) break; diff --git a/libflashrom.c b/libflashrom.c index f90a22c..6dd0167 100644 --- a/libflashrom.c +++ b/libflashrom.c @@ -250,6 +250,7 @@ switch (flag) { case FLASHROM_FLAG_FORCE: flashctx->flags.force = value; break; case FLASHROM_FLAG_FORCE_BOARDMISMATCH: flashctx->flags.force_boardmismatch = value; break; + case FLASHROM_FLAG_BRUTEFORCE: flashctx->flags.bruteforce = value; break; case FLASHROM_FLAG_VERIFY_AFTER_WRITE: flashctx->flags.verify_after_write = value; break; case FLASHROM_FLAG_VERIFY_WHOLE_CHIP: flashctx->flags.verify_whole_chip = value; break; } @@ -267,6 +268,7 @@ switch (flag) { case FLASHROM_FLAG_FORCE: return flashctx->flags.force; case FLASHROM_FLAG_FORCE_BOARDMISMATCH: return flashctx->flags.force_boardmismatch; + case FLASHROM_FLAG_BRUTEFORCE: return flashctx->flags.bruteforce; case FLASHROM_FLAG_VERIFY_AFTER_WRITE: return flashctx->flags.verify_after_write; case FLASHROM_FLAG_VERIFY_WHOLE_CHIP: return flashctx->flags.verify_whole_chip; default: return false; diff --git a/libflashrom.h b/libflashrom.h index 38c95d2..0f2ead8 100644 --- a/libflashrom.h +++ b/libflashrom.h @@ -51,6 +51,7 @@ enum flashrom_flag { FLASHROM_FLAG_FORCE, FLASHROM_FLAG_FORCE_BOARDMISMATCH, + FLASHROM_FLAG_BRUTEFORCE, FLASHROM_FLAG_VERIFY_AFTER_WRITE, FLASHROM_FLAG_VERIFY_WHOLE_CHIP, }; diff --git a/spi25.c b/spi25.c index 8b6c462..832c836 100644 --- a/spi25.c +++ b/spi25.c @@ -21,6 +21,7 @@ #include <stddef.h> #include <string.h> #include <stdbool.h> +#include <stdlib.h> #include "flash.h" #include "flashchips.h" #include "chipdrivers.h" @@ -655,6 +656,48 @@ return spi_send_command(flash, 1 + addr_len, len, cmd, bytes); } +static int spi_rw_bruteforce(struct flashctx *flash, uint8_t *buf1, uint8_t *buf2, + unsigned int startrw_here, unsigned int torw_len, bool rw_flag) { + int rc = 0; + int timeout = 30000; + while (1) { + timeout--; + if (!timeout) { + msg_cerr("%s timeout during command execution\n", __func__); + return -1; + } + + /* First probe. */ + if (flash->chip->probe(flash) != 1) + continue; + + /* First operation. */ + if (rw_flag == 0) + rc = spi_nbyte_read(flash, startrw_here, buf1, torw_len); + else + rc = spi_nbyte_program(flash, startrw_here, buf1, torw_len); + + if (rc != 0) + break; + + /* Second probe. */ + if (flash->chip->probe(flash) != 1) + continue; + + /* Second operation. */ + rc = spi_nbyte_read(flash, startrw_here, buf2, torw_len); + if (rc != 0) + break; + + /* Compare two buffers. */ + if (memcmp(buf1, buf2, torw_len)) + continue; + + break; + } + return rc; +} + /* * Read a part of the flash chip. * FIXME: Use the chunk code from Michael Karcher instead. @@ -668,6 +711,19 @@ /* Limit for multi-die 4-byte-addressing chips. */ unsigned int area_size = min(flash->chip->total_size * 1024, 16 * 1024 * 1024); + unsigned int bruteforce = flashrom_flag_get(flash, FLASHROM_FLAG_BRUTEFORCE); + uint8_t *const buf1 = bruteforce ? malloc(chunksize) : NULL; + uint8_t *const buf2 = bruteforce ? malloc(chunksize) : NULL; + + if (bruteforce) { + if (!buf1 || !buf2) { + msg_gerr("Out of memory!\n"); + goto _free_ret; + } + msg_cdbg("spi_read_chunked: chunksize %i ---> %i\n", chunksize, min(chunksize, 256)); + chunksize = min(chunksize, 256); + } + /* Warning: This loop has a very unusual condition and body. * The loop needs to go through each area with at least one affected * byte. The lowest area number is (start / area_size) since that @@ -685,7 +741,11 @@ lenhere = min(start + len, (i + 1) * area_size) - starthere; for (j = 0; j < lenhere; j += chunksize) { toread = min(chunksize, lenhere - j); - rc = spi_nbyte_read(flash, starthere + j, buf + starthere - start + j, toread); + if (bruteforce) { + rc = spi_rw_bruteforce(flash, buf1, buf2, starthere + j, toread, 0 /* read */); + memcpy(buf + starthere - start + j, buf1, toread); + } else + rc = spi_nbyte_read(flash, starthere + j, buf + starthere - start + j, toread); if (rc) break; } @@ -693,6 +753,9 @@ break; } +_free_ret: + free(buf1); + free(buf2); return rc; } @@ -712,6 +775,19 @@ */ unsigned int page_size = flash->chip->page_size; + unsigned int bruteforce = flashrom_flag_get(flash, FLASHROM_FLAG_BRUTEFORCE); + uint8_t *const buf1 = bruteforce ? malloc(chunksize) : NULL; + uint8_t *const buf2 = bruteforce ? malloc(chunksize) : NULL; + + if (bruteforce) { + if (!buf1 || !buf2) { + msg_gerr("Out of memory!\n"); + goto _free_ret; + } + msg_cdbg("spi_write_chunked: chunksize %i ---> %i\n", chunksize, min(chunksize, 256)); + chunksize = min(chunksize, 256); + } + /* Warning: This loop has a very unusual condition and body. * The loop needs to go through each page with at least one affected * byte. The lowest page number is (start / page_size) since that @@ -731,12 +807,20 @@ int rc; towrite = min(chunksize, lenhere - j); - rc = spi_nbyte_program(flash, starthere + j, buf + starthere - start + j, towrite); + if (bruteforce) { + memcpy(buf1, buf + starthere - start + j, towrite); + rc = spi_rw_bruteforce(flash, buf1, buf2, starthere + j, towrite, 1 /* write */); + } else + rc = spi_nbyte_program(flash, starthere + j, buf + starthere - start + j, towrite); + if (rc) return rc; } } +_free_ret: + free(buf1); + free(buf2); return 0; } -- To view, visit https://review.coreboot.org/c/flashrom/+/31830 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: If47476793721a0061fd65bc6d1f98d48b03dc6c1 Gerrit-Change-Number: 31830 Gerrit-PatchSet: 1 Gerrit-Owner: mikeb mikeb <mikebdp2(a)gmail.com> Gerrit-Reviewer: Mike Banon <mikebdp2(a)gmail.com> Gerrit-MessageType: newchange

4 7

Change in ...flashrom[master]: [RFC] cli_classic: Add `--mode (read|write|verify|erase)` parameter
by Nico Huber (Code Review) Aug. 29, 2026

Aug. 29, 2026

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/30979 Change subject: [RFC] cli_classic: Add `--mode (read|write|verify|erase)` parameter ...................................................................... [RFC] cli_classic: Add `--mode (read|write|verify|erase)` parameter In case the user only wants to specify files for specific layout regions, we need a way to set the operation without specifying a file. Instead of making the <filename> argument optional, we can add a new syntax for this particular purpose. This way, we avoid complex command line parsing and can do more sanity checks and provide better error messages. TODO: Update manpage in case this gets accepted. Change-Id: Idfba11ec9991aac423b07f68f7dc45e7bebbb06b Signed-off-by: Nico Huber <nico.huber(a)secunet.com> --- M cli_classic.c 1 file changed, 42 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/79/30979/1 diff --git a/cli_classic.c b/cli_classic.c index 324e145..d09a8d1 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -39,7 +39,8 @@ "-z|" #endif "-p <programmername>[:<parameters>] [-c <chipname>]\n" - "[-E|(-r|-w|-v) <file>] [(-l <layoutfile>|--ifd) [-i <imagename>]...] [-n] [-N] [-f]]\n" + "[(-r|-w|-v|-E) <file>|-m (r|w|v|e)] [(-l <layoutfile>|--ifd) [-i <region>]...]\n" + "[-n] [-N] [-f]]\n" "[-V[V[V]]] [-o <logfile>]\n\n", name); printf(" -h | --help print this help text\n" @@ -47,6 +48,8 @@ " -r | --read <file> read flash and save to <file>\n" " -w | --write <file> write <file> to flash\n" " -v | --verify <file> verify flash against <file>\n" + " -m | --mode <operation> for use with --include <region>:<file>,\n" + " specify the mode of operation (r|w|v|e)\n" " -E | --erase erase flash memory\n" " -V | --verbose more verbose output\n" " -c | --chip <chipname> probe only for specified flash chip\n" @@ -123,6 +126,7 @@ {"write", 1, NULL, 'w'}, {"erase", 0, NULL, 'E'}, {"verify", 1, NULL, 'v'}, + {"mode", 1, NULL, 'm'}, {"noverify", 0, NULL, 'n'}, {"noverify-all", 0, NULL, 'N'}, {"chip", 1, NULL, 'c'}, @@ -200,6 +204,25 @@ filename = strdup(optarg); verify_it = 1; break; + case 'm': + if (++operation_specified > 1) { + fprintf(stderr, "More than one operation specified. Aborting.\n"); + cli_classic_abort_usage(); + } + /* check that `optarg` is a prefix of a known operation */ + if (strncmp(optarg, "read", strlen(optarg)) == 0) { + read_it = 1; + } else if (strncmp(optarg, "write", strlen(optarg)) == 0) { + write_it = 1; + } else if (strncmp(optarg, "verify", strlen(optarg)) == 0) { + verify_it = 1; + } else if (strncmp(optarg, "erase", strlen(optarg)) == 0) { + erase_it = 1; + } else { + fprintf(stderr, "Unknown operation specified: '%s'\n", optarg); + cli_classic_abort_usage(); + } + break; case 'n': if (verify_it) { fprintf(stderr, "--verify and --noverify are mutually exclusive. Aborting.\n"); @@ -404,7 +427,7 @@ cli_classic_abort_usage(); } - if ((read_it | write_it | verify_it) && check_filename(filename, "image")) { + if (filename && check_filename(filename, "image")) { cli_classic_abort_usage(); } if (layoutfile && check_filename(layoutfile, "layout")) { @@ -654,6 +677,23 @@ flashrom_flag_set(fill_flash, FLASHROM_FLAG_VERIFY_AFTER_WRITE, !dont_verify_it); flashrom_flag_set(fill_flash, FLASHROM_FLAG_VERIFY_WHOLE_CHIP, !dont_verify_all); + if (!filename && (read_it | write_it | verify_it)) { + if (layout->num_entries == 0) { + msg_gerr("Error: The specified operation requires a file.\n"); + ret = 1; + goto out_shutdown; + } + for (i = 0; i < layout->num_entries; i++) { + if (!layout->entries[i].file) { + msg_gerr("Error: Region \"%s\" requires a file argument.\n", + layout->entries[i].name); + ret = 1; + } + if (ret) + goto out_shutdown; + } + } + /* FIXME: We should issue an unconditional chip reset here. This can be * done once we have a .reset function in struct flashchip. * Give the chip time to settle. -- To view, visit https://review.coreboot.org/c/flashrom/+/30979 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Idfba11ec9991aac423b07f68f7dc45e7bebbb06b Gerrit-Change-Number: 30979 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

6 19

Change in ...flashrom[master]: [WIP]spi25.c: Implement fast read
by Arthur Heymans (Code Review) Aug. 29, 2026

Aug. 29, 2026

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/33034 Change subject: [WIP]spi25.c: Implement fast read ...................................................................... [WIP]spi25.c: Implement fast read Use the fast read OP by default and fall back to regular read if that failed. Change-Id: I96393e1beea0164daa8e366a1d09a573f2c6d16f Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M ichspi.c M spi.h M spi25.c 3 files changed, 23 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/34/33034/1 diff --git a/ichspi.c b/ichspi.c index 0f1470d..54cb1f9 100644 --- a/ichspi.c +++ b/ichspi.c @@ -1117,14 +1117,14 @@ opcode = &(curopcodes->opcode[opcode_index]); /* The following valid writecnt/readcnt combinations exist: - * writecnt = 4, readcnt >= 0 + * writecnt = 4 or 5, readcnt >= 0 (The dummy bit on fast reads gets discarded) * writecnt = 1, readcnt >= 0 * writecnt >= 4, readcnt = 0 * writecnt >= 1, readcnt = 0 * writecnt >= 1 is guaranteed for all commands. */ if ((opcode->spi_type == SPI_OPCODE_TYPE_READ_WITH_ADDRESS) && - (writecnt != 4)) { + ((writecnt != 4) && (writecnt != 5))) { msg_perr("%s: Internal command size error for opcode " "0x%02x, got writecnt=%i, want =4\n", __func__, cmd, writecnt); diff --git a/spi.h b/spi.h index 0073c71..65dc033 100644 --- a/spi.h +++ b/spi.h @@ -149,6 +149,7 @@ /* Read the memory */ #define JEDEC_READ 0x03 #define JEDEC_READ_OUTSIZE 0x04 +#define JEDEC_FAST_READ 0x0b /* JEDEC_READ_INSIZE : any length */ /* Read the memory (with delay after sending address) */ @@ -168,6 +169,7 @@ /* Read the memory with 4-byte address From ANY mode (3-bytes or 4-bytes) it works with 4-byte address */ #define JEDEC_READ_4BA 0x13 +#define JEDEC_FAST_READ_4BA 0x0c /* Read the memory with 4-byte address (and delay after sending address) From ANY mode (3-bytes or 4-bytes) it works with 4-byte address */ diff --git a/spi25.c b/spi25.c index 8b6c462..36d2436 100644 --- a/spi25.c +++ b/spi25.c @@ -645,12 +645,30 @@ unsigned int len) { const bool native_4ba = flash->chip->feature_bits & FEATURE_4BA_READ && spi_master_4ba(flash); - uint8_t cmd[1 + JEDEC_MAX_ADDR_LEN] = { native_4ba ? JEDEC_READ_4BA : JEDEC_READ, }; + bool fast_read = true; + uint8_t cmd[2 + JEDEC_MAX_ADDR_LEN]; + + if (native_4ba) + fast_read = flash->chip->feature_bits & FEATURE_4BA_FAST_READ; + + if (fast_read) + cmd[0] = native_4ba ? JEDEC_FAST_READ_4BA : JEDEC_FAST_READ; + else + cmd[0] = native_4ba ? JEDEC_READ_4BA : JEDEC_READ; const int addr_len = spi_prepare_address(flash, cmd, native_4ba, address); if (addr_len < 0) return 1; + if (fast_read) { + cmd[addr_len + 1] = 0; + int ret = spi_send_command(flash, 2 + addr_len, len, cmd, bytes); + if (!ret) + return ret; + msg_cinfo("%s: Fast Read did not succeed, falling back to regular read", __func__); + cmd[0] = native_4ba ? JEDEC_READ_4BA : JEDEC_READ; + } + /* Send Read */ return spi_send_command(flash, 1 + addr_len, len, cmd, bytes); } -- To view, visit https://review.coreboot.org/c/flashrom/+/33034 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I96393e1beea0164daa8e366a1d09a573f2c6d16f Gerrit-Change-Number: 33034 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-MessageType: newchange

3 3

Change in ...flashrom[master]: cli_classic: Report the gathered layout entries at level dbg
by Nico Huber (Code Review) Aug. 29, 2026

Aug. 29, 2026

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/31012 Change subject: cli_classic: Report the gathered layout entries at level dbg ...................................................................... cli_classic: Report the gathered layout entries at level dbg Change-Id: I7678ba5138f0d722ee44747fe123f192abdd0ffd Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M cli_classic.c M layout.c M layout.h 3 files changed, 18 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/12/31012/1 diff --git a/cli_classic.c b/cli_classic.c index ced08c6..536ef24 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -645,6 +645,8 @@ goto out_shutdown; } + report_layout(layout); + flashrom_layout_set(fill_flash, layout); flashrom_flag_set(fill_flash, FLASHROM_FLAG_FORCE, !!force); #if CONFIG_INTERNAL == 1 diff --git a/layout.c b/layout.c index fa66238..c589d17 100644 --- a/layout.c +++ b/layout.c @@ -229,3 +229,17 @@ return ret; } + +void report_layout(const struct flashrom_layout *const l) +{ + unsigned int i; + + if (!l) + return; + + msg_gdbg("Gathered %zu layout entries:\n", l->num_entries); + for (i = 0; i < l->num_entries; ++i) { + msg_gdbg("%08"PRIx32":%08"PRIx32" %s\n", + l->entries[i].start, l->entries[i].end, l->entries[i].name); + } +} diff --git a/layout.h b/layout.h index eb54a4f..61311bc 100644 --- a/layout.h +++ b/layout.h @@ -59,4 +59,6 @@ int process_include_args(struct flashrom_layout *); +void report_layout(const struct flashrom_layout *); + #endif /* !__LAYOUT_H__ */ -- To view, visit https://review.coreboot.org/c/flashrom/+/31012 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I7678ba5138f0d722ee44747fe123f192abdd0ffd Gerrit-Change-Number: 31012 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

6 20

Change in ...flashrom[master]: Add support for security register and SBULK command on Macronix chips
by vl_sk (Code Review) Jan. 13, 2026

Jan. 13, 2026

vl_sk has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/32034 Change subject: Add support for security register and SBULK command on Macronix chips ...................................................................... Add support for security register and SBULK command on Macronix chips Signed-off-by: Vladimir Skokov <vl_sk(a)mail.ru> Change-Id: I6b3d7bd2625dec5fda7b85f421d40c49bbc528a6 --- M chipdrivers.h M flashchips.c M spi.h M spi25_statusreg.c 4 files changed, 78 insertions(+), 24 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/34/32034/1 diff --git a/chipdrivers.h b/chipdrivers.h index 134ed26..54288cd 100644 --- a/chipdrivers.h +++ b/chipdrivers.h @@ -102,7 +102,9 @@ int spi_prettyprint_status_register_sst25(struct flashctx *flash); int spi_prettyprint_status_register_sst25vf016(struct flashctx *flash); int spi_prettyprint_status_register_sst25vf040b(struct flashctx *flash); +int spi_prettyprint_security_register_mx25(struct flashctx *flash); int spi_disable_blockprotect_sst26_global_unprotect(struct flashctx *flash); +int spi_disable_blockprotect_mx25_global_unprotect(struct flashctx *flash); /* sfdp.c */ int probe_spi_sfdp(struct flashctx *flash); diff --git a/flashchips.c b/flashchips.c index d85ea74..2c662e9 100644 --- a/flashchips.c +++ b/flashchips.c @@ -8555,9 +8555,8 @@ .block_erase = spi_block_erase_c7, } }, - /* TODO: security register and SBLK/SBULK; MX25L12835F: configuration register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, + .printlock = spi_prettyprint_security_register_mx25, + .unlock = spi_disable_blockprotect_mx25_global_unprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, @@ -8604,9 +8603,8 @@ .block_erase = spi_block_erase_c7, } }, - /* TODO: security register and SBLK/SBULK; MX25L12835F: configuration register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, + .printlock = spi_prettyprint_security_register_mx25, + .unlock = spi_disable_blockprotect_mx25_global_unprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, @@ -8693,9 +8691,8 @@ .block_erase = spi_block_erase_c7, } }, - /* TODO: security register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, + .printlock = spi_prettyprint_security_register_mx25, + .unlock = spi_disable_blockprotect_mx25_global_unprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1650, 2000}, @@ -8734,9 +8731,8 @@ .block_erase = spi_block_erase_c7, } }, - /* TODO: security register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, + .printlock = spi_prettyprint_security_register_mx25, + .unlock = spi_disable_blockprotect_mx25_global_unprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1650, 2000}, @@ -8776,9 +8772,8 @@ .block_erase = spi_block_erase_c7, } }, - /* TODO: security register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, + .printlock = spi_prettyprint_security_register_mx25, + .unlock = spi_disable_blockprotect_mx25_global_unprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1650, 2000}, @@ -8818,9 +8813,8 @@ .block_erase = spi_block_erase_c7, } }, - /* TODO: security register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, + .printlock = spi_prettyprint_security_register_mx25, + .unlock = spi_disable_blockprotect_mx25_global_unprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1650, 2000}, @@ -8858,9 +8852,8 @@ .block_erase = spi_block_erase_c7, } }, - /* TODO: security register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, + .printlock = spi_prettyprint_security_register_mx25, + .unlock = spi_disable_blockprotect_mx25_global_unprotect, .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1650, 2000}, @@ -8907,9 +8900,8 @@ .block_erase = spi_block_erase_c7, } }, - /* TODO: security register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, + .printlock = spi_prettyprint_security_register_mx25, + .unlock = spi_disable_blockprotect_mx25_global_unprotect, .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1650, 2000}, diff --git a/spi.h b/spi.h index 422e6a0..456d894 100644 --- a/spi.h +++ b/spi.h @@ -170,6 +170,15 @@ From ANY mode (3-bytes or 4-bytes) it works with 4-byte address */ #define JEDEC_BYTE_PROGRAM_4BA 0x12 +/* Read Security Register */ +#define JEDEC_RDSCUR 0x2B +#define JEDEC_RDSCUR_OUTSIZE 0x01 +#define JEDEC_RDSCUR_INSIZE 0x01 + +/* Do GBULK (gang block unlock) */ +#define JEDEC_GBULK 0x98 +#define JEDEC_GBULK_OUTSIZE 0x01 + /* Error codes */ #define SPI_GENERIC_ERROR -1 #define SPI_INVALID_OPCODE -2 diff --git a/spi25_statusreg.c b/spi25_statusreg.c index 4cf7023..4cdf800 100644 --- a/spi25_statusreg.c +++ b/spi25_statusreg.c @@ -237,6 +237,28 @@ return spi_disable_blockprotect_generic(flash, 0x7C, 1 << 7, 0, 0xFF); } +int spi_disable_blockprotect_mx25_global_unprotect(struct flashctx *flash) +{ + static const unsigned char cmd[JEDEC_GBULK_OUTSIZE] = { JEDEC_GBULK }; + int ret; + + ret = spi_write_enable(flash); + if (ret) { + msg_cerr("Set WREN failed!\n"); + return -1; + } + + /* Send GBULK cmd to device. */ + ret = spi_send_command(flash, sizeof(cmd), 0, cmd, NULL); + if (ret) { + msg_cerr("GBULK failed!\n"); + return -1; + } + + /* Disable standard blockprotect */ + return spi_disable_blockprotect_bp3_srwd(flash); +} + static void spi_prettyprint_status_register_hex(uint8_t status) { msg_cdbg("Chip status register is 0x%02x.\n", status); @@ -751,3 +773,32 @@ msg_cdbg("Resulting block protection : %s\n", bpt[(status & 0x1c) >> 2]); return 0; } + +/* === Macronix chips with Security Register === */ + +int spi_read_security_register(struct flashctx *flash) +{ + static const unsigned char cmd[JEDEC_RDSCUR_OUTSIZE] = { JEDEC_RDSCUR }; + unsigned char readarr[JEDEC_RDSCUR_INSIZE]; + int ret; + + ret = spi_send_command(flash, sizeof(cmd), sizeof(readarr), cmd, readarr); + if (ret) { + msg_cerr("RDSCUR failed!\n"); + return 0; + } + + return readarr[0]; +} + +int spi_prettyprint_security_register_mx25(struct flashctx *flash) +{ + int security_register = spi_read_security_register(flash); + int wpsel = !!(security_register & (1 << 7)); + + msg_cdbg("Chip security register: 0x%02X\n", security_register); + msg_cdbg("\tWPSEL is %s\n", wpsel ? "ON" : "OFF"); + + /* Print standard blockprotect info */ + return spi_prettyprint_status_register_bp3_srwd(flash); +} \ No newline at end of file -- To view, visit https://review.coreboot.org/c/flashrom/+/32034 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I6b3d7bd2625dec5fda7b85f421d40c49bbc528a6 Gerrit-Change-Number: 32034 Gerrit-PatchSet: 1 Gerrit-Owner: vl_sk Gerrit-MessageType: newchange

4 6

Change in ...flashrom[master]: hwaccess: Add endianness converting deserialization functions
by Nico Huber (Code Review) April 13, 2022

April 13, 2022

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/31016 Change subject: hwaccess: Add endianness converting deserialization functions ...................................................................... hwaccess: Add endianness converting deserialization functions Add functions like uint32_t read_le32(const void *); Change-Id: Idde177acf8bc5f94cd046b6539dc31532c98e452 Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M hwaccess.h 1 file changed, 14 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/16/31016/1 diff --git a/hwaccess.h b/hwaccess.h index af7054b..5df4fc3 100644 --- a/hwaccess.h +++ b/hwaccess.h @@ -20,6 +20,7 @@ #ifndef __HWACCESS_H__ #define __HWACCESS_H__ 1 +#include <stdint.h> #include "platform.h" #if NEED_PCI == 1 @@ -109,6 +110,19 @@ #define le_to_cpu32 cpu_to_le32 #define le_to_cpu64 cpu_to_le64 +#define read_from(endianness, bits) \ +static inline uint##bits##_t read_##endianness##bits(const void *from) \ +{ \ + return le_to_cpu##bits(*(uint##bits##_t *)from); \ +} + +read_from(be, 8) +read_from(be, 16) +read_from(be, 32) +read_from(le, 8) +read_from(le, 16) +read_from(le, 32) + #if NEED_RAW_ACCESS == 1 #if IS_X86 -- To view, visit https://review.coreboot.org/c/flashrom/+/31016 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Idde177acf8bc5f94cd046b6539dc31532c98e452 Gerrit-Change-Number: 31016 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

6 32

Change in flashrom[master]: usbdev: fix accepting shorter serial numbers than the real one.
by Miklós Márton (Code Review) March 16, 2022

March 16, 2022

Miklós Márton has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/34641 ) Change subject: usbdev: fix accepting shorter serial numbers than the real one. ...................................................................... usbdev: fix accepting shorter serial numbers than the real one. Change-Id: Ife8c4e0a957c4345e27ec9ae9e1480ca80fe505c --- M usbdev.c 1 file changed, 2 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/41/34641/1 diff --git a/usbdev.c b/usbdev.c index 764ac04..7e41235 100644 --- a/usbdev.c +++ b/usbdev.c @@ -104,7 +104,8 @@ msg_pdbg("Serial number is %s\n", myserial); /* Filter out any serial number that does not commence with serialno */ - return 0 != strncmp(serialno, (char *)myserial, strlen(serialno)); + return strlen((char *)myserial) == strlen(serialno) + && 0 != strncmp(serialno, (char *)myserial, strlen(serialno)); } struct libusb_device_handle *usb_dev_get_by_vid_pid_serial( -- To view, visit https://review.coreboot.org/c/flashrom/+/34641 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ife8c4e0a957c4345e27ec9ae9e1480ca80fe505c Gerrit-Change-Number: 34641 Gerrit-PatchSet: 1 Gerrit-Owner: Miklós Márton <martonmiklosqdev(a)gmail.com> Gerrit-MessageType: newchange

2 5

Change in ...flashrom[master]: freebsd_spi: Use malloc() instead of alloca()
by David Hendricks (Code Review) Oct. 10, 2021

Oct. 10, 2021

David Hendricks has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/30765 Change subject: freebsd_spi: Use malloc() instead of alloca() ...................................................................... freebsd_spi: Use malloc() instead of alloca() Change-Id: I03ff2bd1e20bea014333945771b560f17387ebd6 Signed-off-by: David Hendricks <david.hendricks(a)gmail.com> --- M freebsd_spi.c 1 file changed, 7 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/65/30765/1 diff --git a/freebsd_spi.c b/freebsd_spi.c index 215be20..7514912 100644 --- a/freebsd_spi.c +++ b/freebsd_spi.c @@ -145,7 +145,11 @@ /* FreeBSD uses a single buffer for rx and tx. Allocate a temporary one to avoid overwriting anything. */ size_t tmpcnt = readcnt + writecnt; - unsigned char *tmpbuf = alloca(tmpcnt); + unsigned char *tmpbuf = malloc(tmpcnt); + if (!tmpbuf) { + msg_perr("Out of memory!\n"); + return -1; + } bzero(tmpbuf, tmpcnt); memcpy(tmpbuf, txbuf, writecnt); @@ -164,12 +168,14 @@ if (ioctl(fd, SPIGENIOC_TRANSFER, &msg) == -1) { msg_cerr("%s: ioctl: %s\n", __func__, strerror(errno)); + free(tmpbuf); return -1; } if (rxbuf) memcpy(rxbuf, tmpbuf + writecnt, readcnt); + free(tmpbuf); return 0; } -- To view, visit https://review.coreboot.org/c/flashrom/+/30765 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I03ff2bd1e20bea014333945771b560f17387ebd6 Gerrit-Change-Number: 30765 Gerrit-PatchSet: 1 Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-MessageType: newchange

1 1

Change in ...flashrom[master]: Add freebsd_spi programmer
by David Hendricks (Code Review) Oct. 10, 2021

Oct. 10, 2021

David Hendricks has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/30764 Change subject: Add freebsd_spi programmer ...................................................................... Add freebsd_spi programmer Based on linux_spi, using FreeBSD's spigen(4) interface. Change-Id: I4e1689416fbb309df94807f51635bc1f4b53e0c8 Signed-off-by: Greg V <greg(a)unrelenting.technology> --- M Makefile M flashrom.8.tmpl M flashrom.c A freebsd_spi.c M programmer.h 5 files changed, 246 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/64/30764/1 diff --git a/Makefile b/Makefile index 1ff578c..7e709dc 100644 --- a/Makefile +++ b/Makefile @@ -379,6 +379,14 @@ endif endif +ifneq ($(TARGET_OS), FreeBSD) +ifeq ($(CONFIG_FREEBSD_SPI), yes) +UNSUPPORTED_FEATURES += CONFIG_FREEBSD_SPI=yes +else +override CONFIG_FREEBSD_SPI = no +endif +endif + ############################################################################### # General architecture-specific settings. # Like above for the OS, below we verify user-supplied options depending on the target architecture. @@ -647,6 +655,9 @@ CONFIG_LINUX_MTD ?= yes CONFIG_LINUX_SPI ?= yes +# Enable FreeBSD spigen interface by default. We disable them on non-FreeBSD targets. +CONFIG_FREEBSD_SPI ?= yes + # Always enable ITE IT8212F PATA controllers for now. CONFIG_IT8212 ?= yes @@ -945,6 +956,11 @@ PROGRAMMER_OBJS += linux_spi.o endif +ifeq ($(CONFIG_FREEBSD_SPI), yes) +FEATURE_CFLAGS += -D'CONFIG_FREEBSD_SPI=1' +PROGRAMMER_OBJS += freebsd_spi.o +endif + ifeq ($(CONFIG_MSTARDDC_SPI), yes) # This is a totally ugly hack. FEATURE_CFLAGS += $(call debug_shell,grep -q "LINUX_I2C_SUPPORT := yes" .features && printf "%s" "-D'CONFIG_MSTARDDC_SPI=1'") diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl index c557af7..092f070 100644 --- a/flashrom.8.tmpl +++ b/flashrom.8.tmpl @@ -319,6 +319,8 @@ .sp .BR "* linux_spi" " (for SPI flash ROMs accessible via /dev/spidevX.Y on Linux)" .sp +.BR "* freebsd_spi" " (for SPI flash ROMs accessible via /dev/spigenX.Y on FreeBSD)" +.sp .BR "* usbblaster_spi" " (for SPI flash ROMs attached to an Altera USB-Blaster compatible cable)" .sp .BR "* nicintel_eeprom" " (for SPI EEPROMs on Intel Gigabit network cards)" @@ -1065,6 +1067,25 @@ .sp Please note that the linux_spi driver only works on Linux. .SS +.BR "freebsd_spi " programmer +.IP +You have to specify the SPI controller to use with the +.sp +.B " flashrom \-p freebsd_spi:dev=/dev/spigenX.Y" +.sp +syntax where +.B /dev/spigenX.Y +is the FreeBSD device node for your SPI controller. +.sp +In case the device supports it, you can set the SPI clock frequency with the optional +.B spispeed +parameter. The frequency is parsed as kilohertz. +Example that sets the frequency to 8 MHz: +.sp +.B " flashrom \-p freebsd_spi:dev=/dev/spigenX.Y,spispeed=8000" +.sp +Please note that the freebsd_spi driver only works on FreeBSD. +.SS .BR "mstarddc_spi " programmer .IP The Display Data Channel (DDC) is an I2C bus present on VGA and DVI connectors, that allows exchanging diff --git a/flashrom.c b/flashrom.c index 59a7531..624bcfb 100644 --- a/flashrom.c +++ b/flashrom.c @@ -377,6 +377,18 @@ }, #endif +#if CONFIG_FREEBSD_SPI == 1 + { + .name = "freebsd_spi", + .type = OTHER, + .devs.note = "Device files /dev/spigen*.*\n", + .init = freebsd_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + #if CONFIG_USBBLASTER_SPI == 1 { .name = "usbblaster_spi", diff --git a/freebsd_spi.c b/freebsd_spi.c new file mode 100644 index 0000000..215be20 --- /dev/null +++ b/freebsd_spi.c @@ -0,0 +1,186 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2011 Sven Schnelle <svens(a)stackframe.org> + * Copyright (C) 2018 Greg V <greg(a)unrelenting.technology> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#if CONFIG_FREEBSD_SPI == 1 + +#include <stdio.h> +#include <string.h> +#include <stdlib.h> +#include <fcntl.h> +#include <errno.h> +#include <ctype.h> +#include <unistd.h> +#include <sys/ioctl.h> +#include <sys/types.h> +#include <sys/ioccom.h> +#include <sys/spigenio.h> +#include "flash.h" +#include "chipdrivers.h" +#include "programmer.h" +#include "spi.h" + +/* Tested on: + * Xunlong Orange Pi PC (Allwinner H3) */ + +/* Same as in spi(8) */ +#define DEFAULT_BUFFER_SIZE 8192 + +static int fd = -1; + +static int freebsd_spi_shutdown(void *data); +static int freebsd_spi_send_command(struct flashctx *flash, unsigned int writecnt, + unsigned int readcnt, + const unsigned char *txbuf, + unsigned char *rxbuf); +static int freebsd_spi_read(struct flashctx *flash, uint8_t *buf, + unsigned int start, unsigned int len); +static int freebsd_spi_write_256(struct flashctx *flash, const uint8_t *buf, + unsigned int start, unsigned int len); + +static const struct spi_master spi_master_freebsd = { + .type = SPI_CONTROLLER_FREEBSD, + .features = SPI_MASTER_4BA, + .max_data_read = MAX_DATA_UNSPECIFIED, /* TODO? */ + .max_data_write = MAX_DATA_UNSPECIFIED, /* TODO? */ + .command = freebsd_spi_send_command, + .multicommand = default_spi_send_multicommand, + .read = freebsd_spi_read, + .write_256 = freebsd_spi_write_256, + .write_aai = default_spi_write_aai, +}; + +int freebsd_spi_init(void) +{ + char *p, *endp, *dev; + uint32_t speed_hz = 0; + /* FIXME: make the following configurable by CLI options. */ + /* SPI mode 0 (beware this also includes: MSB first, CS active low and others */ + const uint8_t mode = 0; + + p = extract_programmer_param("spispeed"); + if (p && strlen(p)) { + speed_hz = (uint32_t)strtoul(p, &endp, 10) * 1000; + if (p == endp) { + msg_perr("%s: invalid clock: %s kHz\n", __func__, p); + free(p); + return 1; + } + } + free(p); + + dev = extract_programmer_param("dev"); + if (!dev || !strlen(dev)) { + msg_perr("No SPI device given. Use flashrom -p " + "freebsd_spi:dev=/dev/spigenX.Y\n"); + free(dev); + return 1; + } + + msg_pdbg("Using device %s\n", dev); + if ((fd = open(dev, O_RDWR)) == -1) { + msg_perr("%s: failed to open %s: %s\n", __func__, + dev, strerror(errno)); + free(dev); + return 1; + } + free(dev); + + if (register_shutdown(freebsd_spi_shutdown, NULL)) + return 1; + /* We rely on the shutdown function for cleanup from here on. */ + + if (speed_hz > 0) { + if (ioctl(fd, SPIGENIOC_SET_CLOCK_SPEED, &speed_hz) == -1) { + msg_perr("%s: failed to set speed to %d Hz: %s\n", + __func__, speed_hz, strerror(errno)); + return 1; + } + + msg_pdbg("Using %d kHz clock\n", speed_hz/1000); + } + + if (ioctl(fd, SPIGENIOC_SET_SPI_MODE, &mode) == -1) { + msg_perr("%s: failed to set SPI mode to 0x%02x: %s\n", + __func__, mode, strerror(errno)); + return 1; + } + + register_spi_master(&spi_master_freebsd); + return 0; +} + +static int freebsd_spi_shutdown(void *data) +{ + if (fd != -1) { + close(fd); + fd = -1; + } + return 0; +} + +static int freebsd_spi_send_command(struct flashctx *flash, unsigned int writecnt, + unsigned int readcnt, + const unsigned char *txbuf, + unsigned char *rxbuf) +{ + if (fd == -1) + return -1; + /* The implementation currently does not support requests that + don't start with sending a command. */ + if (writecnt == 0) + return SPI_INVALID_LENGTH; + + /* FreeBSD uses a single buffer for rx and tx. Allocate a temporary one to avoid overwriting anything. */ + size_t tmpcnt = readcnt + writecnt; + unsigned char *tmpbuf = alloca(tmpcnt); + + bzero(tmpbuf, tmpcnt); + memcpy(tmpbuf, txbuf, writecnt); + + /* Command/data separation is pretty useless, spi(8) only uses the command. */ + struct spigen_transfer msg = { + .st_command = { + .iov_base = (void*)tmpbuf, + .iov_len = tmpcnt, + }, + .st_data = { + .iov_base = NULL, + .iov_len = 0, + }, + }; + + if (ioctl(fd, SPIGENIOC_TRANSFER, &msg) == -1) { + msg_cerr("%s: ioctl: %s\n", __func__, strerror(errno)); + return -1; + } + + if (rxbuf) + memcpy(rxbuf, tmpbuf + writecnt, readcnt); + + return 0; +} + +static int freebsd_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) +{ + return spi_read_chunked(flash, buf, start, len, DEFAULT_BUFFER_SIZE); +} + +static int freebsd_spi_write_256(struct flashctx *flash, const uint8_t *buf, unsigned int start, unsigned int len) +{ + return spi_write_chunked(flash, buf, start, len, DEFAULT_BUFFER_SIZE); +} + +#endif // CONFIG_FREEBSD_SPI == 1 diff --git a/programmer.h b/programmer.h index 311992a..30687ed 100644 --- a/programmer.h +++ b/programmer.h @@ -103,6 +103,9 @@ #if CONFIG_LINUX_SPI == 1 PROGRAMMER_LINUX_SPI, #endif +#if CONFIG_FREEBSD_SPI == 1 + PROGRAMMER_FREEBSD_SPI, +#endif #if CONFIG_USBBLASTER_SPI == 1 PROGRAMMER_USBBLASTER_SPI, #endif @@ -548,6 +551,11 @@ int linux_spi_init(void); #endif +/* freebsd_spi.c */ +#if CONFIG_FREEBSD_SPI == 1 +int freebsd_spi_init(void); +#endif + /* dediprog.c */ #if CONFIG_DEDIPROG == 1 int dediprog_init(void); @@ -623,6 +631,9 @@ #if CONFIG_LINUX_SPI == 1 SPI_CONTROLLER_LINUX, #endif +#if CONFIG_FREEBSD_SPI == 1 + SPI_CONTROLLER_FREEBSD, +#endif #if CONFIG_SERPROG == 1 SPI_CONTROLLER_SERPROG, #endif -- To view, visit https://review.coreboot.org/c/flashrom/+/30764 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I4e1689416fbb309df94807f51635bc1f4b53e0c8 Gerrit-Change-Number: 30764 Gerrit-PatchSet: 1 Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-MessageType: newchange

1 2

Change in ...flashrom[master]: layout: Introduce layout_next()
by Nico Huber (Code Review) July 1, 2021

July 1, 2021

Hello Angel Pons, Arthur Heymans, David Hendricks, Thomas Heijligen, I'd like you to do a code review. Please visit https://review.coreboot.org/c/flashrom/+/33542 to review the following change. Change subject: layout: Introduce layout_next() ...................................................................... layout: Introduce layout_next() And use it to compare the layouts in flashrom_layout_read_from_ifd() in depth. Change-Id: I284958471c61344d29d92c95d88475065a9ca9aa Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M layout.c M layout.h M libflashrom.c 3 files changed, 20 insertions(+), 7 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/42/33542/1 diff --git a/layout.c b/layout.c index e49189e..684615c 100644 --- a/layout.c +++ b/layout.c @@ -252,7 +252,7 @@ return lowest; } -const struct romentry *layout_next_included( +const struct romentry *layout_next( const struct flashrom_layout *const layout, const struct romentry *iterator) { const struct romentry *const end = layout->entries + layout->num_entries; @@ -262,14 +262,21 @@ else iterator = &layout->entries[0]; - for (; iterator < end; ++iterator) { - if (!iterator->included) - continue; + if (iterator < end) return iterator; - } return NULL; } +const struct romentry *layout_next_included( + const struct flashrom_layout *const layout, const struct romentry *iterator) +{ + while ((iterator = layout_next(layout, iterator))) { + if (iterator->included) + break; + } + return iterator; +} + /** * @addtogroup flashrom-layout * @{ diff --git a/layout.h b/layout.h index 53a20d6..f5444e2 100644 --- a/layout.h +++ b/layout.h @@ -66,5 +66,6 @@ int process_include_args(struct flashrom_layout *l, const struct layout_include_args *const args); const struct romentry *layout_next_included_region(const struct flashrom_layout *, chipoff_t); const struct romentry *layout_next_included(const struct flashrom_layout *, const struct romentry *); +const struct romentry *layout_next(const struct flashrom_layout *, const struct romentry *); #endif /* !__LAYOUT_H__ */ diff --git a/libflashrom.c b/libflashrom.c index af62002..6743d50 100644 --- a/libflashrom.c +++ b/libflashrom.c @@ -345,8 +345,13 @@ goto _finalize_ret; } - if (chip_layout->base.num_entries != dump_layout.base.num_entries || - memcmp(chip_layout->entries, dump_layout.entries, sizeof(dump_layout.entries))) { + const struct romentry *chip_entry = layout_next(&chip_layout->base, NULL); + const struct romentry *dump_entry = layout_next(&dump_layout.base, NULL); + while (chip_entry && dump_entry && !memcmp(chip_entry, dump_entry, sizeof(*chip_entry))) { + chip_entry = layout_next(&chip_layout->base, chip_entry); + dump_entry = layout_next(&dump_layout.base, dump_entry); + } + if (chip_entry || dump_entry) { msg_cerr("Descriptors don't match!\n"); ret = 5; goto _finalize_ret; -- To view, visit https://review.coreboot.org/c/flashrom/+/33542 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I284958471c61344d29d92c95d88475065a9ca9aa Gerrit-Change-Number: 33542 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Thomas Heijligen <src(a)posteo.de> Gerrit-MessageType: newchange

5 25

Change in ...flashrom[master]: layout: Drop `count` parameter of flashrom_layout_empty()
by Nico Huber (Code Review) June 26, 2021

June 26, 2021

Hello Angel Pons, Arthur Heymans, David Hendricks, Thomas Heijligen, I'd like you to do a code review. Please visit https://review.coreboot.org/c/flashrom/+/33544 to review the following change. Change subject: layout: Drop `count` parameter of flashrom_layout_empty() ...................................................................... layout: Drop `count` parameter of flashrom_layout_empty() Change-Id: I22c180c9971068b1ae101845ce88484c6842b852 Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M flashrom.c M ich_descriptors.c M layout.c M libflashrom.h 4 files changed, 5 insertions(+), 6 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/44/33544/1 diff --git a/flashrom.c b/flashrom.c index cb91cef..eeaa067 100644 --- a/flashrom.c +++ b/flashrom.c @@ -1332,7 +1332,7 @@ return -1; /* Fill default layout covering the whole chip. */ - if (flashrom_layout_empty(&flash->default_layout, 1) || + if (flashrom_layout_empty(&flash->default_layout) || flashrom_layout_add_region(flash->default_layout, 0, flash->chip->total_size * 1024 - 1, "complete flash") || flashrom_layout_include_region(flash->default_layout, "complete flash")) diff --git a/ich_descriptors.c b/ich_descriptors.c index 8383801..1d35cca 100644 --- a/ich_descriptors.c +++ b/ich_descriptors.c @@ -1170,7 +1170,7 @@ if (read_ich_descriptors_from_dump(dump, len, &cs, &desc)) return 1; - if (flashrom_layout_empty(layout, ARRAY_SIZE(regions))) + if (flashrom_layout_empty(layout)) return 2; ssize_t i; diff --git a/layout.c b/layout.c index 3560a18..9d633bb 100644 --- a/layout.c +++ b/layout.c @@ -33,7 +33,7 @@ struct flashrom_layout *get_global_layout(void) { if (!global_layout) - flashrom_layout_empty(&global_layout, 0); + flashrom_layout_empty(&global_layout); return global_layout; } @@ -264,12 +264,11 @@ * @brief Create a new, empty layout. * * @param layout Pointer to returned layout reference. - * @param count Number of layout entries to allocate. * * @return 0 on success, * 1 if out of memory. */ -int flashrom_layout_empty(struct flashrom_layout **const layout, const unsigned int count) +int flashrom_layout_empty(struct flashrom_layout **layout) { *layout = malloc(sizeof(**layout)); if (!*layout) { diff --git a/libflashrom.h b/libflashrom.h index 90f3e2c..785217e 100644 --- a/libflashrom.h +++ b/libflashrom.h @@ -62,7 +62,7 @@ int flashrom_image_verify(struct flashrom_flashctx *, const void *buffer, size_t buffer_len); struct flashrom_layout; -int flashrom_layout_empty(struct flashrom_layout **layout, unsigned int count); +int flashrom_layout_empty(struct flashrom_layout **); int flashrom_layout_read_from_ifd(struct flashrom_layout **, struct flashrom_flashctx *, const void *dump, size_t len); int flashrom_layout_read_fmap_from_rom(struct flashrom_layout **, struct flashrom_flashctx *, off_t offset, size_t length); -- To view, visit https://review.coreboot.org/c/flashrom/+/33544 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I22c180c9971068b1ae101845ce88484c6842b852 Gerrit-Change-Number: 33544 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Thomas Heijligen <src(a)posteo.de> Gerrit-MessageType: newchange

5 10

Change in ...flashrom[master]: layout: Introduce flashrom_layout_empty()
by Nico Huber (Code Review) June 26, 2021

June 26, 2021

Hello Angel Pons, Arthur Heymans, David Hendricks, Thomas Heijligen, I'd like you to do a code review. Please visit https://review.coreboot.org/c/flashrom/+/33543 to review the following change. Change subject: layout: Introduce flashrom_layout_empty() ...................................................................... layout: Introduce flashrom_layout_empty() It initializes an empty layout. Currently the maximum number of entries has to be specified, which will vanisch once we use dynamic allocation. Change-Id: I2ae7246493ff592e631cce924777925c7825e398 Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M cli_classic.c M flash.h M flashrom.c M ich_descriptors.c M ich_descriptors.h M layout.c M libflashrom.c M libflashrom.h 8 files changed, 54 insertions(+), 37 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/43/33543/1 diff --git a/cli_classic.c b/cli_classic.c index 2e07612..a98be47 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -673,8 +673,10 @@ out_shutdown: programmer_shutdown(); out: - for (i = 0; i < chipcount; i++) + for (i = 0; i < chipcount; i++) { + flashrom_layout_release(flashes[i].default_layout); free(flashes[i].chip); + } layout_cleanup(&include_args); free(filename); diff --git a/flash.h b/flash.h index 5bbfa0a..84de7a7 100644 --- a/flash.h +++ b/flash.h @@ -252,7 +252,7 @@ chipaddr virtual_registers; struct registered_master *mst; const struct flashrom_layout *layout; - struct single_layout fallback_layout; + struct flashrom_layout *default_layout; struct { bool force; bool force_boardmismatch; diff --git a/flashrom.c b/flashrom.c index e355731..3436a59 100644 --- a/flashrom.c +++ b/flashrom.c @@ -1331,15 +1331,12 @@ if (!flash->chip) return -1; - /* Fill fallback layout covering the whole chip. */ - struct single_layout *const fallback = &flash->fallback_layout; - fallback->base.entries = &fallback->entry; - fallback->base.max_entries = 1; - fallback->base.num_entries = 0; - if (flashrom_layout_add_region(&fallback->base, + /* Fill default layout covering the whole chip. */ + if (flashrom_layout_empty(&flash->default_layout, 1) || + flashrom_layout_add_region(flash->default_layout, 0, flash->chip->total_size * 1024 - 1, "complete flash") || - flashrom_layout_include_region(&fallback->base, "complete flash")) - return -1; + flashrom_layout_include_region(flash->default_layout, "complete flash")) + return -1; tmp = flashbuses_to_text(flash->chip->bustype); msg_cinfo("%s %s flash chip \"%s\" (%d kB, %s) ", force ? "Assuming" : "Found", diff --git a/ich_descriptors.c b/ich_descriptors.c index b2c5d4c..8383801 100644 --- a/ich_descriptors.c +++ b/ich_descriptors.c @@ -1156,7 +1156,9 @@ * 1 if the descriptor couldn't be parsed, * 2 when out of memory. */ -int layout_from_ich_descriptors(struct ich_layout *const layout, const void *const dump, const size_t len) +int layout_from_ich_descriptors( + struct flashrom_layout **const layout, + const void *const dump, const size_t len) { static const char *const regions[] = { "fd", "bios", "me", "gbe", "pd", "reg5", "bios2", "reg7", "ec", "reg9", "ie", @@ -1168,10 +1170,8 @@ if (read_ich_descriptors_from_dump(dump, len, &cs, &desc)) return 1; - memset(layout, 0x00, sizeof(*layout)); - layout->base.entries = layout->entries; - layout->base.max_entries = ARRAY_SIZE(layout->entries); - layout->base.num_entries = 0; + if (flashrom_layout_empty(layout, ARRAY_SIZE(regions))) + return 2; ssize_t i; for (i = 0; i < min(ich_number_of_regions(cs, &desc.content), ARRAY_SIZE(regions)); ++i) { @@ -1179,8 +1179,11 @@ const chipoff_t limit = ICH_FREG_LIMIT(desc.region.FLREGs[i]); if (limit <= base) continue; - if (flashrom_layout_add_region(&layout->base, base, limit, regions[i])) + if (flashrom_layout_add_region(*layout, base, limit, regions[i])) { + flashrom_layout_release(*layout); + *layout = NULL; return 2; + } } return 0; } diff --git a/ich_descriptors.h b/ich_descriptors.h index 4225286..498af21 100644 --- a/ich_descriptors.h +++ b/ich_descriptors.h @@ -562,11 +562,6 @@ struct ich_desc_upper_map upper; }; -struct ich_layout { - struct flashrom_layout base; - struct romentry entries[MAX_NUM_FLREGS]; -}; - ssize_t ich_number_of_regions(enum ich_chipset cs, const struct ich_desc_content *content); ssize_t ich_number_of_masters(enum ich_chipset cs, const struct ich_desc_content *content); @@ -585,6 +580,6 @@ int read_ich_descriptors_via_fdo(enum ich_chipset cs, void *spibar, struct ich_descriptors *desc); int getFCBA_component_density(enum ich_chipset cs, const struct ich_descriptors *desc, uint8_t idx); -int layout_from_ich_descriptors(struct ich_layout *, const void *dump, size_t len); +int layout_from_ich_descriptors(struct flashrom_layout **, const void *dump, size_t len); #endif /* __ICH_DESCRIPTORS_H__ */ diff --git a/layout.c b/layout.c index 0978a67..8198f17 100644 --- a/layout.c +++ b/layout.c @@ -37,7 +37,7 @@ if (flashctx->layout && flashctx->layout->num_entries) return flashctx->layout; else - return &flashctx->fallback_layout.base; + return flashctx->default_layout; } #ifndef __LIBPAYLOAD__ @@ -270,6 +270,29 @@ */ /** + * @brief Create a new, empty layout. + * + * @param layout Pointer to returned layout reference. + * @param count Number of layout entries to allocate. + * + * @return 0 on success, + * 1 if out of memory. + */ +int flashrom_layout_empty(struct flashrom_layout **const layout, const unsigned int count) +{ + *layout = malloc(sizeof(**layout) + count * sizeof(struct romentry)); + if (!*layout) { + msg_gerr("Error creating layout: %s\n", strerror(errno)); + return 1; + } + + (*layout)->entries = (void *)((char *)*layout + sizeof(**layout)); + (*layout)->max_entries = count; + (*layout)->num_entries = 0; + return 0; +} + +/** * @brief Add another region to an existing layout. * * @param layout The existing layout. diff --git a/libflashrom.c b/libflashrom.c index aa43e65..d891944 100644 --- a/libflashrom.c +++ b/libflashrom.c @@ -205,13 +205,14 @@ ret = 0; /* We found one chip, now check that there is no second match. */ if (probe_flash(&registered_masters[i], flash_idx + 1, &second_flashctx, 0) != -1) { + flashrom_layout_release(second_flashctx.default_layout); ret = 3; break; } } } if (ret) { - free(*flashctx); + flashrom_flash_release(*flashctx); *flashctx = NULL; } return ret; @@ -235,6 +236,7 @@ */ void flashrom_flash_release(struct flashrom_flashctx *const flashctx) { + flashrom_layout_release(flashctx->default_layout); free(flashctx); } @@ -310,16 +312,10 @@ #ifndef __FLASHROM_LITTLE_ENDIAN__ return 6; #else - struct ich_layout dump_layout; + struct flashrom_layout *dump_layout, *chip_layout; int ret = 1; void *const desc = malloc(0x1000); - struct ich_layout *const chip_layout = malloc(sizeof(*chip_layout)); - if (!desc || !chip_layout) { - msg_gerr("Out of memory!\n"); - goto _free_ret; - } - if (prepare_flash_access(flashctx, true, false, false, false)) goto _free_ret; @@ -332,7 +328,7 @@ } msg_cinfo("done.\n"); - if (layout_from_ich_descriptors(chip_layout, desc, 0x1000)) { + if (layout_from_ich_descriptors(&chip_layout, desc, 0x1000)) { msg_cerr("Couldn't parse the descriptor!\n"); ret = 3; goto _finalize_ret; @@ -345,11 +341,11 @@ goto _finalize_ret; } - const struct romentry *chip_entry = layout_next(&chip_layout->base, NULL); - const struct romentry *dump_entry = layout_next(&dump_layout.base, NULL); + const struct romentry *chip_entry = layout_next(chip_layout, NULL); + const struct romentry *dump_entry = layout_next(dump_layout, NULL); while (chip_entry && dump_entry && !memcmp(chip_entry, dump_entry, sizeof(*chip_entry))) { - chip_entry = layout_next(&chip_layout->base, chip_entry); - dump_entry = layout_next(&dump_layout.base, dump_entry); + chip_entry = layout_next(chip_layout, chip_entry); + dump_entry = layout_next(dump_layout, dump_entry); } if (chip_entry || dump_entry) { msg_cerr("Descriptors don't match!\n"); @@ -365,7 +361,7 @@ finalize_flash_access(flashctx); _free_ret: if (ret) - free(chip_layout); + flashrom_layout_release(chip_layout); free(desc); return ret; #endif diff --git a/libflashrom.h b/libflashrom.h index 2b84bd4..90f3e2c 100644 --- a/libflashrom.h +++ b/libflashrom.h @@ -62,6 +62,7 @@ int flashrom_image_verify(struct flashrom_flashctx *, const void *buffer, size_t buffer_len); struct flashrom_layout; +int flashrom_layout_empty(struct flashrom_layout **layout, unsigned int count); int flashrom_layout_read_from_ifd(struct flashrom_layout **, struct flashrom_flashctx *, const void *dump, size_t len); int flashrom_layout_read_fmap_from_rom(struct flashrom_layout **, struct flashrom_flashctx *, off_t offset, size_t length); -- To view, visit https://review.coreboot.org/c/flashrom/+/33543 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I2ae7246493ff592e631cce924777925c7825e398 Gerrit-Change-Number: 33543 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: David Hendricks <david.hendricks(a)gmail.com> Gerrit-Reviewer: Thomas Heijligen <src(a)posteo.de> Gerrit-MessageType: newchange

5 26

Change in ...flashrom[master]: manibuilder: Add list of tags used for the 1.1.x branch
by Nico Huber (Code Review) March 16, 2021

March 16, 2021

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/33340 Change subject: manibuilder: Add list of tags used for the 1.1.x branch ...................................................................... manibuilder: Add list of tags used for the 1.1.x branch Change-Id: I243aa11f4a017a4209efcc227cec56eb12020e28 Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M util/manibuilder/Makefile.targets 1 file changed, 48 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/40/33340/1 diff --git a/util/manibuilder/Makefile.targets b/util/manibuilder/Makefile.targets index 044b0a4..079c181 100644 --- a/util/manibuilder/Makefile.targets +++ b/util/manibuilder/Makefile.targets @@ -112,6 +112,46 @@ # can only run what is still maintained 10X_TAGS := $(filter $(10X_TAGS),$(ALL_TAGS)) +# original 1.1.x tags +11X_TAGS := \ + anita\:amd64 \ + djgpp\:6.1.0 \ + fedora\:25-x86_64 \ + fedora\:25-ppc64le \ + fedora\:25-aarch64 \ + fedora\:24-x86_64 \ + centos\:7.3-aarch64-clean \ + centos\:7.3-amd64-clean \ + centos\:7.2-amd64-clean \ + debian-debootstrap\:ppc64el-stretch \ + debian-debootstrap\:armhf-stretch \ + debian-debootstrap\:mips-stretch \ + debian-debootstrap\:mipsel-stretch \ + debian-debootstrap\:amd64-stretch \ + debian-debootstrap\:i386-stretch \ + debian-debootstrap\:amd64-sid \ + ubuntu-debootstrap\:arm64-xenial \ + ubuntu-debootstrap\:amd64-xenial \ + ubuntu-debootstrap\:powerpc-xenial \ + ubuntu-debootstrap\:amd64-bionic \ + alpine\:amd64-v3.7 \ + alpine\:amd64-v3.8 \ + alpine\:amd64-v3.6 \ + alpine\:armhf-v3.8 \ + alpine\:i386-v3.6 \ + alpine\:i386-v3.7 \ + alpine\:i386-v3.8 \ + debian-debootstrap\:amd64-buster \ + debian-debootstrap\:i386-buster \ + debian-debootstrap\:i386-sid \ + ubuntu-debootstrap\:armhf-xenial \ + ubuntu-debootstrap\:i386-bionic \ + ubuntu-debootstrap\:i386-xenial \ + ubuntu-debootstrap\:ppc64el-xenial \ + +# can only run what is still maintained +11X_TAGS := $(filter $(11X_TAGS),$(ALL_TAGS)) + default: $(DEFAULT_TAGS) native: $(NATIVE_TAGS) @@ -121,6 +161,9 @@ 1.0.x: export TEST_REVISION=refs/heads/1.0.x 1.0.x: $(10X_TAGS) +1.1.x: export TEST_REVISION=refs/heads/1.1.x +1.1.x: $(11X_TAGS) + show-default: @printf "%s\n" $(DEFAULT_TAGS) @@ -133,6 +176,9 @@ show-1.0.x: @printf "%s\n" $(10X_TAGS) -.PHONY: default native all 1.0.x -.PHONY: show-default show-native show-all show-1.0.x +show-1.1.x: + @printf "%s\n" $(11X_TAGS) + +.PHONY: default native all 1.0.x 1.1.x +.PHONY: show-default show-native show-all show-1.0.x show-1.1.x .PHONY: $(ALL_TAGS) -- To view, visit https://review.coreboot.org/c/flashrom/+/33340 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I243aa11f4a017a4209efcc227cec56eb12020e28 Gerrit-Change-Number: 33340 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

3 4

Change in ...flashrom[master]: manibuilder: Add newer targets for Alpine, CentOS, Fedora
by Nico Huber (Code Review) March 16, 2021

March 16, 2021

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/33342 Change subject: manibuilder: Add newer targets for Alpine, CentOS, Fedora ...................................................................... manibuilder: Add newer targets for Alpine, CentOS, Fedora Change-Id: I6c9939601abd3bd67424b8fa9a5ec800e50e3a51 Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M util/manibuilder/Makefile.targets 1 file changed, 8 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/42/33342/1 diff --git a/util/manibuilder/Makefile.targets b/util/manibuilder/Makefile.targets index 044b0a4..f5a142c 100644 --- a/util/manibuilder/Makefile.targets +++ b/util/manibuilder/Makefile.targets @@ -1,8 +1,12 @@ ANITA_TAGS := anita\:amd64 anita\:i386 MULTIARCH_TAGS := \ + centos\:7.6-armhfp-clean centos\:7.6-amd64-clean \ centos\:7.3-aarch64-clean centos\:7.3-amd64-clean \ centos\:7.2-amd64-clean \ + $(foreach a,x86_64 s390x aarch64, fedora\:30-$(a)) \ + $(foreach a,x86_64 s390x ppc64le aarch64, fedora\:29-$(a)) \ + fedora\:28-armhfp \ $(foreach a,x86_64 ppc64le aarch64, \ $(foreach v,25 24, \ fedora\:$(v)-$(a))) \ @@ -14,7 +18,7 @@ ubuntu-debootstrap\:$(a)-$(v))) \ ubuntu-debootstrap\:powerpc-xenial \ $(foreach a,aarch64 armhf amd64 i386, \ - $(foreach v,v3.8 v3.7 v3.6, \ + $(foreach v,v3.9 v3.8 v3.7 v3.6, \ alpine\:$(a)-$(v))) \ OTHER_TAGS := djgpp\:6.1.0 @@ -41,6 +45,7 @@ DEFAULT_TAGS := \ anita\:amd64 \ djgpp\:6.1.0 \ + fedora\:30-aarch64 \ fedora\:25-x86_64 \ fedora\:25-ppc64le \ fedora\:25-aarch64 \ @@ -59,8 +64,9 @@ ubuntu-debootstrap\:amd64-xenial \ ubuntu-debootstrap\:powerpc-xenial \ ubuntu-debootstrap\:amd64-bionic \ - alpine\:amd64-v3.7 \ + alpine\:aarch64-v3.9 \ alpine\:amd64-v3.8 \ + alpine\:amd64-v3.7 \ # also run all native tests by default DEFAULT_TAGS += $(filter-out $(DEFAULT_TAGS),$(NATIVE_TAGS)) -- To view, visit https://review.coreboot.org/c/flashrom/+/33342 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I6c9939601abd3bd67424b8fa9a5ec800e50e3a51 Gerrit-Change-Number: 33342 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

3 3

Change in ...flashrom[master]: manibuilder: Allow warnings in NetBSD and CentOS builds
by Nico Huber (Code Review) March 16, 2021

March 16, 2021

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/33339 Change subject: manibuilder: Allow warnings in NetBSD and CentOS builds ...................................................................... manibuilder: Allow warnings in NetBSD and CentOS builds Their old compilers stumble because of `-Wmissing-braces`. Change-Id: Ia9ee17fd1f0c8b191091f89ffbf44329c6521d7d Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M util/manibuilder/Makefile 1 file changed, 2 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/39/33339/1 diff --git a/util/manibuilder/Makefile b/util/manibuilder/Makefile index d93abec..7f76c33 100644 --- a/util/manibuilder/Makefile +++ b/util/manibuilder/Makefile @@ -53,9 +53,10 @@ djgpp\:6.1.0: LIBS_BASE=../ djgpp\:6.1.0: MAKEARGS+=strip CONFIG_JLINK_SPI=no $(ANITA_TAGS): MAKECMD=gmake -$(ANITA_TAGS): MAKEARGS+=CONFIG_JLINK_SPI=no +$(ANITA_TAGS): MAKEARGS+=CONFIG_JLINK_SPI=no WARNERROR=no $(filter alpine% centos%,$(MULTIARCH_TAGS)): MAKEARGS+=CONFIG_JLINK_SPI=no $(filter %-xenial %-stretch,$(MULTIARCH_TAGS)): MAKEARGS+=CONFIG_JLINK_SPI=no +$(filter centos%,$(MULTIARCH_TAGS)): MAKEARGS+=WARNERROR=no $(ALL_TAGS): export QUIET_SETUP=$(QUIET_TEST) $(ALL_TAGS): %: %-check-build $(QUIET_TEST)docker rm -f mani_$(call ident,$*) >/dev/null 2>&1 || true -- To view, visit https://review.coreboot.org/c/flashrom/+/33339 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: Ia9ee17fd1f0c8b191091f89ffbf44329c6521d7d Gerrit-Change-Number: 33339 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

3 3

Change in ...flashrom[master]: manibuilder: Add libjaylink where possible, disable where not
by Nico Huber (Code Review) March 16, 2021

March 16, 2021

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/33338 Change subject: manibuilder: Add libjaylink where possible, disable where not ...................................................................... manibuilder: Add libjaylink where possible, disable where not Change-Id: I2f7aebe602ebdb0a4748640e281b9a92146f0ca8 Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M util/manibuilder/Dockerfile.debian-debootstrap M util/manibuilder/Dockerfile.fedora M util/manibuilder/Dockerfile.ubuntu-debootstrap M util/manibuilder/Makefile 4 files changed, 10 insertions(+), 4 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/38/33338/1 diff --git a/util/manibuilder/Dockerfile.debian-debootstrap b/util/manibuilder/Dockerfile.debian-debootstrap index c6648e8..ce201f8 100644 --- a/util/manibuilder/Dockerfile.debian-debootstrap +++ b/util/manibuilder/Dockerfile.debian-debootstrap @@ -5,8 +5,9 @@ apt-get -qq update && \ apt-get -qq upgrade && \ apt-get -qq dist-upgrade && \ - apt-get -qqy install gcc make git doxygen ccache \ + apt-get -qqy install gcc make git doxygen ccache pkg-config \ libpci-dev libusb-dev libftdi-dev libusb-1.0-0-dev && \ + { apt-get -qqy install libjaylink-dev || true; } && \ apt-get clean USER mani diff --git a/util/manibuilder/Dockerfile.fedora b/util/manibuilder/Dockerfile.fedora index 927e487..319039b 100644 --- a/util/manibuilder/Dockerfile.fedora +++ b/util/manibuilder/Dockerfile.fedora @@ -3,7 +3,8 @@ RUN \ useradd -p locked -m mani && \ dnf install -q -y git gcc ccache make \ - pciutils-devel libusb-devel libusbx-devel libftdi-devel && \ + pciutils-devel libusb-devel libusbx-devel libftdi-devel \ + libjaylink-devel && \ dnf clean -q -y all USER mani diff --git a/util/manibuilder/Dockerfile.ubuntu-debootstrap b/util/manibuilder/Dockerfile.ubuntu-debootstrap index f50047c..fe3ad1e 100644 --- a/util/manibuilder/Dockerfile.ubuntu-debootstrap +++ b/util/manibuilder/Dockerfile.ubuntu-debootstrap @@ -18,8 +18,9 @@ apt-get -qq update && \ apt-get -qq upgrade && \ apt-get -qq dist-upgrade && \ - apt-get -qqy install gcc make git doxygen ccache \ + apt-get -qqy install gcc make git doxygen ccache pkg-config \ libpci-dev libusb-dev libftdi-dev libusb-1.0-0-dev && \ + { apt-get -qqy install libjaylink-dev || true; } && \ apt-get clean USER mani diff --git a/util/manibuilder/Makefile b/util/manibuilder/Makefile index 9b87f45..d93abec 100644 --- a/util/manibuilder/Makefile +++ b/util/manibuilder/Makefile @@ -51,8 +51,11 @@ djgpp\:6.1.0: CC=ccache i586-pc-msdosdjgpp-gcc djgpp\:6.1.0: STRIP=i586-pc-msdosdjgpp-strip djgpp\:6.1.0: LIBS_BASE=../ -djgpp\:6.1.0: MAKEARGS+=strip +djgpp\:6.1.0: MAKEARGS+=strip CONFIG_JLINK_SPI=no $(ANITA_TAGS): MAKECMD=gmake +$(ANITA_TAGS): MAKEARGS+=CONFIG_JLINK_SPI=no +$(filter alpine% centos%,$(MULTIARCH_TAGS)): MAKEARGS+=CONFIG_JLINK_SPI=no +$(filter %-xenial %-stretch,$(MULTIARCH_TAGS)): MAKEARGS+=CONFIG_JLINK_SPI=no $(ALL_TAGS): export QUIET_SETUP=$(QUIET_TEST) $(ALL_TAGS): %: %-check-build $(QUIET_TEST)docker rm -f mani_$(call ident,$*) >/dev/null 2>&1 || true -- To view, visit https://review.coreboot.org/c/flashrom/+/33338 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I2f7aebe602ebdb0a4748640e281b9a92146f0ca8 Gerrit-Change-Number: 33338 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

3 3

Change in ...flashrom[master]: manibuilder: Enable CONFIG_EVERYTHING=yes
by Nico Huber (Code Review) March 16, 2021

March 16, 2021

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/33337 Change subject: manibuilder: Enable CONFIG_EVERYTHING=yes ...................................................................... manibuilder: Enable CONFIG_EVERYTHING=yes Change-Id: I4651b55744d730956aa8fda8fdfccbbd68cdda19 Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M util/manibuilder/Makefile 1 file changed, 3 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/37/33337/1 diff --git a/util/manibuilder/Makefile b/util/manibuilder/Makefile index b1e161c..9b87f45 100644 --- a/util/manibuilder/Makefile +++ b/util/manibuilder/Makefile @@ -4,6 +4,7 @@ CC := ccache cc MAKECMD := make +MAKEARGS := CONFIG_EVERYTHING=yes spc := spc += @@ -50,7 +51,7 @@ djgpp\:6.1.0: CC=ccache i586-pc-msdosdjgpp-gcc djgpp\:6.1.0: STRIP=i586-pc-msdosdjgpp-strip djgpp\:6.1.0: LIBS_BASE=../ -djgpp\:6.1.0: TARGET=strip +djgpp\:6.1.0: MAKEARGS+=strip $(ANITA_TAGS): MAKECMD=gmake $(ALL_TAGS): export QUIET_SETUP=$(QUIET_TEST) $(ALL_TAGS): %: %-check-build @@ -65,7 +66,7 @@ $(MAKECMD) clean && $(MAKECMD) -j$${CPUS:-1} CC='$(CC)' \ $(if $(STRIP),STRIP='$(STRIP)') \ $(if $(LIBS_BASE),LIBS_BASE='$(LIBS_BASE)') \ - $(TARGET)" \ + $(MAKEARGS)" \ $(if $(QUIET_TEST),>/dev/null 2>&1) || echo $*: $$? $(addsuffix -shell,$(ALL_TAGS)): %-shell: %-check-build -- To view, visit https://review.coreboot.org/c/flashrom/+/33337 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I4651b55744d730956aa8fda8fdfccbbd68cdda19 Gerrit-Change-Number: 33337 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

3 4

Change in flashrom[master]: libflashrom: add querying functions with meson integration
by Michał Żygowski (Code Review) March 13, 2021

March 13, 2021

Hello ?ukasz Dmitrowski, I'd like you to do a code review. Please visit https://review.coreboot.org/c/flashrom/+/34363 to review the following change. Change subject: libflashrom: add querying functions with meson integration ...................................................................... libflashrom: add querying functions with meson integration Work based on lukasz.dmitrowski(a)gmail.com code Change-Id: I49041b8fa5700dabe59fef0d2337339d34cd6c6f Signed-off-by: Artur Raglis <artur.raglis(a)3mdeb.com> Signed-off-by: Lukasz Dmitrowski <lukasz.dmitrowski(a)gmail.com> --- M libflashrom.c M libflashrom.h M libflashrom.map M meson.build 4 files changed, 187 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/63/34363/1 diff --git a/libflashrom.c b/libflashrom.c index f90a22c..cc26835 100644 --- a/libflashrom.c +++ b/libflashrom.c @@ -103,7 +103,142 @@ * @{ */ -/* TBD */ +/** + * @brief Returns flashrom version + * @return Flashrom version + */ +const char *flashrom_version_info(void) +{ + return flashrom_version; +} + +/** + * @brief Returns list of supported programmers + * @return List of supported programmers + */ +const char **flashrom_supported_programmers(void) +{ + enum programmer p = 0; + const char **supported_programmers = NULL; + supported_programmers = malloc((PROGRAMMER_INVALID + 1) * sizeof(char*)); + + if (supported_programmers != NULL) { + for (; p < PROGRAMMER_INVALID; ++p) { + supported_programmers[p] = programmer_table[p].name; + } + } else { + msg_gerr("Memory allocation error!\n"); + } + + return supported_programmers; +} + +/** + * @brief Returns list of supported flash chips + * @return List of supported flash chips + */ +flashrom_flashchip_info *flashrom_supported_flash_chips(void) +{ + int i = 0; + flashrom_flashchip_info *supported_flashchips = malloc(flashchips_size * sizeof(flashrom_flashchip_info)); + + if (supported_flashchips != NULL) { + for (; i < flashchips_size; ++i) { + supported_flashchips[i].vendor = flashchips[i].vendor; + supported_flashchips[i].name = flashchips[i].name; + supported_flashchips[i].tested.erase = (flashrom_test_state) flashchips[i].tested.erase; + supported_flashchips[i].tested.probe = (flashrom_test_state) flashchips[i].tested.probe; + supported_flashchips[i].tested.read = (flashrom_test_state) flashchips[i].tested.read; + supported_flashchips[i].tested.write = (flashrom_test_state) flashchips[i].tested.write; + supported_flashchips[i].total_size = flashchips[i].total_size; + } + } else { + msg_gerr("Memory allocation error!\n"); + } + + return supported_flashchips; +} + +/** + * @brief Returns list of supported mainboards + * @return List of supported mainboards + */ +flashrom_board_info *flashrom_supported_boards(void) +{ + int boards_known_size = 0; + int i = 0; + const struct board_info *binfo = boards_known; + + while ((binfo++)->vendor) + ++boards_known_size; + binfo = boards_known; + /* add place for {0} */ + ++boards_known_size; + + flashrom_board_info *supported_boards = malloc(boards_known_size * sizeof(flashrom_board_info)); + + if (supported_boards != NULL) { + for (; i < boards_known_size; ++i) { + supported_boards[i].vendor = binfo[i].vendor; + supported_boards[i].name = binfo[i].name; + supported_boards[i].working = binfo[i].working; + } + } else { + msg_gerr("Memory allocation error!\n"); + } + + return supported_boards; +} + +/** + * @brief Returns list of supported chipsets + * @return List of supported chipsets + */ +flashrom_chipset_info *flashrom_supported_chipsets(void) +{ + int chipset_enables_size = 0; + int i = 0; + const struct penable *chipset = chipset_enables; + + while ((chipset++)->vendor_name) + ++chipset_enables_size; + chipset = chipset_enables; + /* add place for {0}*/ + ++chipset_enables_size; + + flashrom_chipset_info *supported_chipsets = malloc(chipset_enables_size * sizeof(flashrom_chipset_info)); + + if (supported_chipsets != NULL) { + for (; i < chipset_enables_size; ++i) { + supported_chipsets[i].vendor = chipset[i].vendor_name; + supported_chipsets[i].chipset = chipset[i].device_name; + supported_chipsets[i].vendor_id = chipset[i].vendor_id; + supported_chipsets[i].chipset_id = chipset[i].device_id; + supported_chipsets[i].status = chipset[i].status; + } + } else { + msg_gerr("Memory allocation error!\n"); + } + + return supported_chipsets; +} + +/** + * @brief Frees memory allocated by libflashrom API + * @param Pointer to block of memory which should be freed + * @return 0 on success + * 1 on null pointer error + */ +int flashrom_data_free(void *const p) +{ + if (!p) { + msg_gerr("flashrom_data_free - Null pointer!\n"); + return 1; + } else { + free(p); + return 0; + } +} /** @} */ /* end flashrom-query */ diff --git a/libflashrom.h b/libflashrom.h index 38c95d2..ebba16b 100644 --- a/libflashrom.h +++ b/libflashrom.h @@ -37,6 +37,50 @@ typedef int(flashrom_log_callback)(enum flashrom_log_level, const char *format, va_list); void flashrom_set_log_callback(flashrom_log_callback *); +/** @ingroup flashrom-query */ +typedef enum { + FLASHROM_TESTED_OK = 0, + FLASHROM_TESTED_NT = 1, + FLASHROM_TESTED_BAD = 2, + FLASHROM_TESTED_DEP = 3, + FLASHROM_TESTED_NA = 4, +} flashrom_test_state; + +typedef struct flashrom_flashchip_info { + const char *vendor; + const char *name; + unsigned int total_size; + struct flashrom_tested { + flashrom_test_state probe; + flashrom_test_state read; + flashrom_test_state erase; + flashrom_test_state write; + } tested; +} flashrom_flashchip_info; + +typedef struct flashrom_board_info { + const char *vendor; + const char *name; + flashrom_test_state working; +} flashrom_board_info; + +typedef struct flashrom_chipset_info { + const char *vendor; + const char *chipset; + uint16_t vendor_id; + uint16_t chipset_id; + flashrom_test_state status; +} flashrom_chipset_info; + +const char *flashrom_version_info(void); +void flashrom_system_info(void); +const char **flashrom_supported_programmers(void); +flashrom_flashchip_info *flashrom_supported_flash_chips(void); +flashrom_board_info *flashrom_supported_boards(void); +flashrom_chipset_info *flashrom_supported_chipsets(void); +int flashrom_data_free(void *const p); + +/** @ingroup flashrom-prog */ struct flashrom_programmer; int flashrom_programmer_init(struct flashrom_programmer **, const char *prog_name, const char *prog_params); int flashrom_programmer_shutdown(struct flashrom_programmer *); diff --git a/libflashrom.map b/libflashrom.map index 3c287ff..d6dd24d 100644 --- a/libflashrom.map +++ b/libflashrom.map @@ -1,7 +1,11 @@ LIBFLASHROM_1.0 { global: + flashrom_board_info; + flashrom_chipset_info; + flashrom_data_free; flashrom_flag_get; flashrom_flag_set; + flashrom_flashchip_info; flashrom_flash_erase; flashrom_flash_getsize; flashrom_flash_probe; @@ -20,5 +24,8 @@ flashrom_programmer_shutdown; flashrom_set_log_callback; flashrom_shutdown; + flashrom_supported_programmers; + flashrom_system_info; + flashrom_version_info; local: *; }; diff --git a/meson.build b/meson.build index 1923fdf..00f4a2f 100644 --- a/meson.build +++ b/meson.build @@ -68,8 +68,6 @@ srcs = [] need_libusb0 = false -need_raw_access = false -need_serial = false # check for required symbols if cc.has_function('clock_gettime') -- To view, visit https://review.coreboot.org/c/flashrom/+/34363 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I49041b8fa5700dabe59fef0d2337339d34cd6c6f Gerrit-Change-Number: 34363 Gerrit-PatchSet: 1 Gerrit-Owner: Michał Żygowski <michal.zygowski(a)3mdeb.com> Gerrit-Reviewer: ?ukasz Dmitrowski <lukasz.dmitrowski(a)gmail.com> Gerrit-MessageType: newchange

5 23

Change in ...flashrom[master]: dediprog: Use 4BA page program without 0x12
by David Hendricks (Code Review) Aug. 25, 2020

Aug. 25, 2020

David Hendricks has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/30521 Change subject: dediprog: Use 4BA page program without 0x12 ...................................................................... dediprog: Use 4BA page program without 0x12 It's not clear exactly what the difference is between WRITE_MODE_4B_ADDR_256B_PAGE_PGM with and without _0x12 from the SF600 command spec, but the former seems to work more reliably. Tested using an SF600 (FW v7.2.21), IS25LP256D, W25Q256JV, and MX25L25735. Change-Id: I3cb37ec8838f5bb02948ed52b4a2906fa033cf83 Signed-off-by: David Hendricks <david.hendricks(a)gmail.com> --- M dediprog.c 1 file changed, 2 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/21/30521/1 diff --git a/dediprog.c b/dediprog.c index 2a190d2..303f1d5 100644 --- a/dediprog.c +++ b/dediprog.c @@ -398,7 +398,8 @@ } } else if (dedi_spi_cmd == WRITE_MODE_PAGE_PGM) { if (flash->chip->feature_bits & FEATURE_4BA_WRITE) { - data_packet[3] = WRITE_MODE_4B_ADDR_256B_PAGE_PGM_0x12; +// data_packet[3] = WRITE_MODE_4B_ADDR_256B_PAGE_PGM_0x12; + data_packet[3] = WRITE_MODE_4B_ADDR_256B_PAGE_PGM; data_packet[4] = JEDEC_BYTE_PROGRAM_4BA; use_4ba = true; } else if (flash->in_4ba_mode) { -- To view, visit https://review.coreboot.org/c/flashrom/+/30521 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I3cb37ec8838f5bb02948ed52b4a2906fa033cf83 Gerrit-Change-Number: 30521 Gerrit-PatchSet: 1 Gerrit-Owner: David Hendricks <david.hendricks(a)gmail.com> Gerrit-MessageType: newchange

1 1

Change in flashrom[master]: flashchips: add W25M512JV
by Joel Stanley (Code Review) April 8, 2020

April 8, 2020

Joel Stanley has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/34595 ) Change subject: flashchips: add W25M512JV ...................................................................... flashchips: add W25M512JV https://www.winbond.com/resource-files/w25m512jv%20revd%2009052017.pdf Change-Id: I8d16f0918785795cc49500435a03641b87d706e9 Signed-off-by: Joel Stanley <joel(a)jms.id.au> --- M flashchips.c M flashchips.h 2 files changed, 20 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/95/34595/1 diff --git a/flashchips.c b/flashchips.c index 166af6a..304ebe7 100644 --- a/flashchips.c +++ b/flashchips.c @@ -15902,6 +15902,25 @@ { .vendor = "Winbond", + .name = "W25Q512JV", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q512JV, + .total_size = 64 * 1024, + .page_size = 1024, + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .printlock = spi_prettyprint_status_register_plain, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", .name = "W25Q256JV_M", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, diff --git a/flashchips.h b/flashchips.h index 006b95e..c606161 100644 --- a/flashchips.h +++ b/flashchips.h @@ -921,6 +921,7 @@ #define WINBOND_NEX_W25Q64_V 0x4017 /* W25Q64BV, W25Q64CV; W25Q64FV in SPI mode (default) */ #define WINBOND_NEX_W25Q128_V 0x4018 /* W25Q128BV; W25Q128FV in SPI mode (default) */ #define WINBOND_NEX_W25Q256_V 0x4019 /* W25Q256FV or W25Q256JV_Q (QE=1) */ +#define WINBOND_NEX_W25Q512JV 0x4020 /* W25Q512JV */ #define WINBOND_NEX_W25Q20_W 0x5012 /* W25Q20BW */ #define WINBOND_NEX_W25Q40BW 0x5013 /* W25Q40BW */ #define WINBOND_NEX_W25Q80BW 0x5014 /* W25Q80BW */ -- To view, visit https://review.coreboot.org/c/flashrom/+/34595 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I8d16f0918785795cc49500435a03641b87d706e9 Gerrit-Change-Number: 34595 Gerrit-PatchSet: 1 Gerrit-Owner: Joel Stanley Gerrit-MessageType: newchange

4 10

Change in ...flashrom[master]: nicintel_eeprom: Reduce usage of is_i210()
by Nico Huber (Code Review) Dec. 10, 2019

Dec. 10, 2019

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/33637 Change subject: nicintel_eeprom: Reduce usage of is_i210() ...................................................................... nicintel_eeprom: Reduce usage of is_i210() Don't entagle the code paths for the two NIC classes if it's not necessary. Only compile tested. Change-Id: I59164ccf54afbbd64a0598282d13e80ff7fd6fa4 Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M nicintel_eeprom.c 1 file changed, 52 insertions(+), 46 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/37/33637/1 diff --git a/nicintel_eeprom.c b/nicintel_eeprom.c index 4e01fcb..4d45f79 100644 --- a/nicintel_eeprom.c +++ b/nicintel_eeprom.c @@ -145,14 +145,6 @@ return 1; } -static int nicintel_ee_probe(struct flashctx *flash) -{ - if (is_i210(nicintel_pci->device_id)) - return nicintel_ee_probe_i210(flash); - - return nicintel_ee_probe_82580(flash); -} - #define MAX_ATTEMPTS 10000000 static int nicintel_ee_read_word(unsigned int addr, uint16_t *data) { @@ -281,6 +273,11 @@ return 0; } +static int nicintel_ee_erase_i210(struct flashctx *flash, unsigned int addr, unsigned int len) +{ + return nicintel_ee_write_i210(flash, NULL, addr, len); +} + static int nicintel_ee_bitset(int reg, int bit, bool val) { uint32_t tmp; @@ -392,24 +389,24 @@ nicintel_ee_bitset(EEC, EE_REQ, 0); /* Give up direct access. */ return ret; } -static int nicintel_ee_write(struct flashctx *flash, const uint8_t *buf, unsigned int addr, unsigned int len) -{ - if (is_i210(nicintel_pci->device_id)) - return nicintel_ee_write_i210(flash, buf, addr, len); - return nicintel_ee_write_82580(flash, buf, addr, len); +static int nicintel_ee_erase_82580(struct flashctx *flash, unsigned int addr, unsigned int len) +{ + return nicintel_ee_write_82580(flash, NULL, addr, len); } -static int nicintel_ee_erase(struct flashctx *flash, unsigned int addr, unsigned int len) -{ - return nicintel_ee_write(flash, NULL, addr, len); -} - -static const struct opaque_master opaque_master_nicintel_ee = { - .probe = nicintel_ee_probe, +static const struct opaque_master opaque_master_nicintel_ee_82580 = { + .probe = nicintel_ee_probe_82580, .read = nicintel_ee_read, - .write = nicintel_ee_write, - .erase = nicintel_ee_erase, + .write = nicintel_ee_write_82580, + .erase = nicintel_ee_erase_82580, +}; + +static const struct opaque_master opaque_master_nicintel_ee_i210 = { + .probe = nicintel_ee_probe_i210, + .read = nicintel_ee_read, + .write = nicintel_ee_write_i210, + .erase = nicintel_ee_erase_i210, }; static int nicintel_ee_shutdown_i210(void *arg) @@ -432,7 +429,7 @@ return -1; } -static int nicintel_ee_shutdown(void *eecp) +static int nicintel_ee_shutdown_82580(void *eecp) { uint32_t old_eec = *(uint32_t *)eecp; /* Request bitbanging and unselect the chip first to be safe. */ @@ -463,35 +460,44 @@ if (!io_base_addr) return 1; - nicintel_eebar = rphysmap("Intel Gigabit NIC w/ SPI EEPROM", - io_base_addr + (is_i210(dev->device_id) ? 0x12000 : 0), MEMMAP_SIZE); - if (!nicintel_eebar) - return 1; - - nicintel_pci = dev; - if ((dev->device_id != UNPROG_DEVICE) && ! is_i210(dev->device_id)) - { - uint32_t eec = pci_mmio_readl(nicintel_eebar + EEC); - - /* C.f. 3.3.1.5 for the detection mechanism (maybe? contradicting the EE_PRES definition), - * and 3.3.1.7 for possible recovery. */ - if (!(eec & BIT(EE_PRES))) { - msg_perr("Controller reports no EEPROM is present.\n"); + if (!is_i210(dev->device_id)) { + nicintel_eebar = rphysmap("Intel Gigabit NIC w/ SPI EEPROM", io_base_addr, MEMMAP_SIZE); + if (!nicintel_eebar) return 1; + + nicintel_pci = dev; + if ((dev->device_id != UNPROG_DEVICE)) { + uint32_t eec = pci_mmio_readl(nicintel_eebar + EEC); + + /* C.f. 3.3.1.5 for the detection mechanism (maybe? contradicting + the EE_PRES definition), + and 3.3.1.7 for possible recovery. */ + if (!(eec & BIT(EE_PRES))) { + msg_perr("Controller reports no EEPROM is present.\n"); + return 1; + } + + uint32_t *eecp = malloc(sizeof(uint32_t)); + if (eecp == NULL) + return 1; + *eecp = eec; + + if (register_shutdown(nicintel_ee_shutdown_82580, eecp)) + return 1; } - uint32_t *eecp = malloc(sizeof(uint32_t)); - if (eecp == NULL) + return register_opaque_master(&opaque_master_nicintel_ee_82580); + } else { + nicintel_eebar = rphysmap("Intel i210 NIC w/ emulated EEPROM", + io_base_addr + 0x12000, MEMMAP_SIZE); + if (!nicintel_eebar) return 1; - *eecp = eec; - if (register_shutdown(nicintel_ee_shutdown, eecp)) - return 1; - } - - if (is_i210(dev->device_id)) if (register_shutdown(nicintel_ee_shutdown_i210, NULL)) return 1; - return register_opaque_master(&opaque_master_nicintel_ee); + return register_opaque_master(&opaque_master_nicintel_ee_i210); + } + + return 1; } -- To view, visit https://review.coreboot.org/c/flashrom/+/33637 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I59164ccf54afbbd64a0598282d13e80ff7fd6fa4 Gerrit-Change-Number: 33637 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

3 4

Change in ...flashrom[master]: Implement IFWI layout reading
by Nico Huber (Code Review) Dec. 1, 2019

Dec. 1, 2019

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/31018 Change subject: Implement IFWI layout reading ...................................................................... Implement IFWI layout reading Alas, yet another conflicting command-line option before we overhaul the internal layout handling. Change-Id: I1f1ef4c5d109b81dec7a11bca04ba89204fa84eb Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M Makefile M cli_classic.c A ifwi.c M libflashrom.c M libflashrom.h 5 files changed, 463 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/18/31018/1 diff --git a/Makefile b/Makefile index 1e7db3e..4a1094d 100644 --- a/Makefile +++ b/Makefile @@ -536,7 +536,7 @@ ############################################################################### # Library code. -LIB_OBJS = libflashrom.o layout.o flashrom.o udelay.o programmer.o helpers.o ich_descriptors.o fmap.o +LIB_OBJS = libflashrom.o layout.o flashrom.o udelay.o programmer.o helpers.o ich_descriptors.o fmap.o ifwi.o ############################################################################### # Frontend related stuff. diff --git a/cli_classic.c b/cli_classic.c index 536ef24..f764a6d 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -57,6 +57,7 @@ " --fmap read ROM layout from fmap embedded in ROM\n" " --fmap-file <fmapfile> read ROM layout from fmap in <fmapfile>\n" " --ifd read layout from an Intel Firmware Descriptor\n" + " --ifwi read layout from an Integrated Firmware Image\n" " -i | --image <name> only flash image <name> from flash layout\n" " -o | --output <logfile> log output to <logfile>\n" " --flash-contents <ref-file> assume flash contents to be <ref-file>\n" @@ -100,7 +101,7 @@ struct flashctx *fill_flash; const char *name; int namelen, opt, i, j; - int startchip = -1, chipcount = 0, option_index = 0, force = 0, ifd = 0, fmap = 0; + int startchip = -1, chipcount = 0, option_index = 0, force = 0, ifd = 0, ifwi = 0, fmap = 0; #if CONFIG_PRINT_WIKI == 1 int list_supported_wiki = 0; #endif @@ -110,6 +111,7 @@ enum programmer prog = PROGRAMMER_INVALID; enum { OPTION_IFD = 0x0100, + OPTION_IFWI, OPTION_FMAP, OPTION_FMAP_FILE, OPTION_FLASH_CONTENTS, @@ -129,6 +131,7 @@ {"force", 0, NULL, 'f'}, {"layout", 1, NULL, 'l'}, {"ifd", 0, NULL, OPTION_IFD}, + {"ifwi", 0, NULL, OPTION_IFWI}, {"fmap", 0, NULL, OPTION_FMAP}, {"fmap-file", 1, NULL, OPTION_FMAP_FILE}, {"image", 1, NULL, 'i'}, @@ -238,6 +241,10 @@ fprintf(stderr, "Error: --layout and --ifd both specified. Aborting.\n"); cli_classic_abort_usage(); } + if (ifwi) { + fprintf(stderr, "Error: --layout and --ifwi both specified. Aborting.\n"); + cli_classic_abort_usage(); + } if (fmap) { fprintf(stderr, "Error: --layout and --fmap-file both specified. Aborting.\n"); cli_classic_abort_usage(); @@ -249,12 +256,31 @@ fprintf(stderr, "Error: --layout and --ifd both specified. Aborting.\n"); cli_classic_abort_usage(); } + if (ifwi) { + fprintf(stderr, "Error: --ifwi and --ifd both specified. Aborting.\n"); + cli_classic_abort_usage(); + } if (fmap) { fprintf(stderr, "Error: --fmap-file and --ifd both specified. Aborting.\n"); cli_classic_abort_usage(); } ifd = 1; break; + case OPTION_IFWI: + if (layoutfile) { + fprintf(stderr, "Error: --layout and --ifwi both specified. Aborting.\n"); + cli_classic_abort_usage(); + } + if (ifd) { + fprintf(stderr, "Error: --ifd and --ifwi both specified. Aborting.\n"); + cli_classic_abort_usage(); + } + if (fmap) { + fprintf(stderr, "Error: --fmap-file and --ifwi both specified. Aborting.\n"); + cli_classic_abort_usage(); + } + ifwi = 1; + break; case OPTION_FMAP_FILE: if (fmap) { fprintf(stderr, "Error: --fmap or --fmap-file specified " @@ -265,6 +291,10 @@ fprintf(stderr, "Error: --fmap-file and --ifd both specified. Aborting.\n"); cli_classic_abort_usage(); } + if (ifwi) { + fprintf(stderr, "Error: --fmap-file and --ifwi both specified. Aborting.\n"); + cli_classic_abort_usage(); + } if (layoutfile) { fprintf(stderr, "Error: --fmap-file and --layout both specified. Aborting.\n"); cli_classic_abort_usage(); @@ -282,6 +312,10 @@ fprintf(stderr, "Error: --fmap and --ifd both specified. Aborting.\n"); cli_classic_abort_usage(); } + if (ifwi) { + fprintf(stderr, "Error: --fmap and --ifwi both specified. Aborting.\n"); + cli_classic_abort_usage(); + } if (layoutfile) { fprintf(stderr, "Error: --layout and --fmap both specified. Aborting.\n"); cli_classic_abort_usage(); @@ -452,7 +486,7 @@ goto out; } - if (!ifd && !fmap && process_include_args(get_global_layout())) { + if (!ifd && !ifwi && !fmap && process_include_args(get_global_layout())) { ret = 1; goto out; } @@ -611,6 +645,10 @@ process_include_args(layout))) { ret = 1; goto out_shutdown; + } else if (ifwi && (flashrom_layout_read_from_ifwi(&layout, fill_flash) || + process_include_args(layout))) { + ret = 1; + goto out_shutdown; } else if (fmap && fmapfile) { struct stat s; if (stat(fmapfile, &s) != 0) { diff --git a/ifwi.c b/ifwi.c new file mode 100644 index 0000000..320335a --- /dev/null +++ b/ifwi.c @@ -0,0 +1,359 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2019 secunet Security Networks AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdio.h> +#include <stddef.h> +#include <stdint.h> +#include <inttypes.h> +#include <stdbool.h> +#include <stdlib.h> +#include <string.h> + +#include "hwaccess.h" +#include "layout.h" +#include "flash.h" +#include "ifwi.h" + +static size_t bpdt_size(const struct bpdt *const header) +{ + return BPDT_HEADER_LENGTH + header->desc_count * BPDT_ENTRY_LENGTH; +} + +static int deserialize_bpdt_header(struct bpdt *const header, const uint8_t *const from) +{ + header->signature = read_le32(from + 0); + header->desc_count = read_le16(from + 4); + header->version = read_le16(from + 6); + header->xorsum = read_le32(from + 8); + header->ifwi_version = read_le32(from + 12); + + if (header->signature != BPDT_SIGNATURE) { + msg_gerr("IFWI: BPDT signature mismatch. Found 0x%08"PRIx32", expected 0x%08x.\n", + header->signature, BPDT_SIGNATURE); + return -4; + } + if (header->version != 1) { + msg_gerr("IFWI: Unknown BPDT version: %"PRIu32".\n", header->version); + return -3; + } + return 0; +} + +static int deserialize_bpdt_entries(struct bpdt *const bpdt, const uint8_t *const from, const size_t limit) +{ + unsigned int i; + size_t offset; + + for (i = 0, offset = 0; i < bpdt->desc_count; ++i, offset += BPDT_ENTRY_LENGTH) { + bpdt->entries[i].type = read_le16(from + offset + 0); + bpdt->entries[i].flags = read_le16(from + offset + 2); + bpdt->entries[i].offset = read_le32(from + offset + 4); + bpdt->entries[i].size = read_le32(from + offset + 8); + msg_gdbg("IFWI: BPDT entry #%u (0x%04"PRIx16", 0x%04"PRIx16", 0x%08"PRIx32", 0x%08"PRIx32")\n", + i, bpdt->entries[i].type, bpdt->entries[i].flags, + bpdt->entries[i].offset, bpdt->entries[i].size); + + const uint32_t end = bpdt->entries[i].offset + bpdt->entries[i].size; + if (end < bpdt->entries[i].offset) { + msg_gerr("IFWI: BPDT entry overflows 32-bit space; " + "offset 0x%08"PRIx32" size 0x%08"PRIx32"\n", + bpdt->entries[i].offset, bpdt->entries[i].size); + return -4; + } + if (end > limit) { + msg_gerr("IFWI: BPDT entry points outside of the partition: %08"PRIx32":%08"PRIx32"\n", + bpdt->entries[i].offset, end - 1); + return -4; + } + } + return (int)i; +} + +static int read_bpdt(struct bpdt **bpdt, + const size_t flash_offset, const size_t partition_limit, + int (*const read)(void *args, uint8_t *buf, unsigned int start, unsigned int len), + void *const read_args) +{ + uint8_t *buf; + int ret; + + buf = malloc(BPDT_HEADER_LENGTH); + *bpdt = malloc(sizeof(**bpdt)); + if (!buf || !*bpdt) { + msg_gerr("Out of memory!\n"); + ret = -1; + goto _free_bpdt_ret; + } + + if (read(read_args, buf, flash_offset, BPDT_HEADER_LENGTH)) { + ret = -2; + goto _free_bpdt_ret; + } + ret = deserialize_bpdt_header(*bpdt, buf); + if (ret < 0) + goto _free_bpdt_ret; + + buf = realloc_or_free(buf, bpdt_size(*bpdt)); + *bpdt = realloc_or_free(*bpdt, offsetof(struct bpdt, entries) + + (*bpdt)->desc_count * sizeof((*bpdt)->entries[0])); + if (!buf || !*bpdt) { + ret = -1; + goto _free_bpdt_ret; + } + + if (read(read_args, buf + BPDT_HEADER_LENGTH, + flash_offset + BPDT_HEADER_LENGTH, bpdt_size(*bpdt) - BPDT_HEADER_LENGTH)) { + ret = -2; + goto _free_bpdt_ret; + } + ret = deserialize_bpdt_entries(*bpdt, (uint8_t *)buf + BPDT_HEADER_LENGTH, partition_limit); + if (ret < 0) + goto _free_bpdt_ret; + + ret = 0; + goto _free_buf_ret; + +_free_bpdt_ret: + free(*bpdt); +_free_buf_ret: + free(buf); + return ret; +} + +static size_t spd_size(const struct spd *const header) +{ + return header->header_length + header->num_entries * SPD_ENTRY_LENGTH; +} + +static int deserialize_spd_header(struct spd *const header, const uint8_t *const from) +{ + header->marker = read_le32(from + 0); + header->num_entries = read_le32(from + 4); + header->header_version = read_le8 (from + 8); + header->entry_version = read_le8 (from + 9); + header->header_length = read_le8 (from + 10); + header->checksum = read_le8 (from + 11); + memcpy(header->name, from + 12, sizeof(header->name) - 1); + header->name[sizeof(header->name) - 1] = '\0'; + + if (header->marker != SPD_MARKER) { + msg_gerr("IFWI: SPD marker mismatch. Found 0x%08"PRIx32", expected 0x%08x.\n", + header->marker, SPD_MARKER); + return -4; + } + if (header->header_version != 1) { + msg_gerr("IFWI: Unknown SPD header version: %"PRIu8".\n", header->header_version); + return -3; + } + if (header->entry_version != 1) { + msg_gerr("IFWI: Unknown SPD entry version: %"PRIu8".\n", header->entry_version); + return -3; + } + return 0; +} + +static int deserialize_spd_entries(struct spd *const spd, const uint8_t *const from, const size_t limit) +{ + unsigned int i; + size_t offset; + + for (i = 0, offset = 0; i < spd->num_entries; ++i, offset += SPD_ENTRY_LENGTH) { + memcpy(spd->entries[i].name, from + offset, sizeof(spd->entries[i].name) - 1); + spd->entries[i].name[sizeof(spd->entries[i].name) - 1] = '\0'; + spd->entries[i].offset = read_le32(from + offset + 12); + spd->entries[i].length = read_le32(from + offset + 16); + msg_gdbg("IFWI: SPD entry #%u (%s, 0x%08"PRIx32", 0x%08"PRIx32")\n", + i, spd->entries[i].name, spd->entries[i].offset, spd->entries[i].length); + + const uint32_t end = spd->entries[i].offset + spd->entries[i].length; + if (end < spd->entries[i].offset) { + msg_gerr("IFWI: SPD entry overflows 32-bit space; " + "offset 0x%08"PRIx32" size 0x%08"PRIx32"\n", + spd->entries[i].offset, spd->entries[i].length); + return -4; + } + if (end > limit) { + msg_gerr("IFWI: SPD entry points outside of the partition: %08"PRIx32":%08"PRIx32"\n", + spd->entries[i].offset, end - 1); + return -4; + } + } + return (int)i; +} + +static int read_spd(struct spd **spd, + const size_t flash_offset, const size_t partition_limit, + int (*const read)(void *args, uint8_t *buf, unsigned int start, unsigned int len), + void *const read_args) +{ + uint8_t *buf; + int ret; + + buf = malloc(SPD_MIN_HEADER_LENGTH); + *spd = malloc(sizeof(**spd)); + if (!buf || !*spd) { + msg_gerr("Out of memory!\n"); + ret = -1; + goto _free_spd_ret; + } + + if (read(read_args, buf, flash_offset, SPD_MIN_HEADER_LENGTH)) { + ret = -2; + goto _free_spd_ret; + } + ret = deserialize_spd_header(*spd, (uint8_t *)buf); + if (ret < 0) + goto _free_spd_ret; + + buf = realloc_or_free(buf, spd_size(*spd)); + *spd = realloc_or_free(*spd, offsetof(struct spd, entries) + + (*spd)->num_entries * sizeof((*spd)->entries[0])); + if (!buf || !*spd) { + ret = -1; + goto _free_spd_ret; + } + + if (read(read_args, buf + (*spd)->header_length, + flash_offset + (*spd)->header_length, spd_size(*spd) - (*spd)->header_length)) { + ret = -2; + goto _free_spd_ret; + } + ret = deserialize_spd_entries(*spd, (uint8_t *)buf + (*spd)->header_length, partition_limit); + if (ret < 0) + goto _free_spd_ret; + + ret = 0; + goto _free_buf_ret; + +_free_spd_ret: + free(*spd); +_free_buf_ret: + free(buf); + return ret; +} + +static int layout_from_ifwi(struct flashrom_layout **const layout, + const size_t primary_offset, const size_t secondary_offset, + const size_t partition_limit, + int (*const read)(void *args, uint8_t *buf, unsigned int start, unsigned int len), + void *const read_args) +{ + struct bpdt *bpdt; + struct spd *spd; + size_t bpdt_offset, offset; + unsigned int i, j; + int ret = -1; + + if (!secondary_offset) + bpdt_offset = primary_offset; + else + bpdt_offset = secondary_offset; + + ret = read_bpdt(&bpdt, bpdt_offset, partition_limit - primary_offset, read, read_args); + if (ret < 0) + return ret; + + if (!secondary_offset && !(*layout = new_layout(32))) { + ret = -1; + goto _free_bpdt_ret; + } + + ret = add_layout_entry(layout, secondary_offset ? "S-BPDT" : "BPDT", + bpdt_offset, bpdt_offset + bpdt_size(bpdt) - 1); + if (ret < 0) + goto _free_layout_ret; + + for (i = 0; i < bpdt->desc_count; ++i) { + offset = primary_offset + bpdt->entries[i].offset; + + if (!bpdt->entries[i].offset || !bpdt->entries[i].size) { + msg_gdbg("IFWI: Skipping empty BPDT entry #%u of type %"PRIu16".\n", + i, bpdt->entries[i].type); + continue; + } + + switch (bpdt->entries[i].type) { + case 5: + /* recurse into secondary BPDT */ + ret = layout_from_ifwi(layout, primary_offset, offset, + partition_limit, read, read_args); + if (ret) + goto _free_layout_ret; + continue; + case 0: /* Fall through.*/ + case 1: /* Fall through.*/ + case 2: /* Fall through.*/ + case 3: /* Fall through.*/ + case 4: /* Fall through.*/ + case 6: /* Fall through.*/ + case 7: /* Fall through.*/ + case 8: /* Fall through.*/ + case 9: /* Fall through.*/ + case 14: /* Fall through.*/ + case 15: + break; + default: + continue; + } + + ret = read_spd(&spd, offset, partition_limit - offset, read, read_args); + switch (ret) { + case 0: + break; + case -1: /* Fall through. */ + case -2: + goto _free_layout_ret; + default: + continue; + } + + ret = add_layout_entry(layout, spd->name, offset, offset + bpdt->entries[i].size - 1); + if (ret < 0) { + free(spd); + goto _free_layout_ret; + } + for (j = 0; j < spd->num_entries; ++j) { + offset = primary_offset + bpdt->entries[i].offset + + (spd->entries[j].offset & SPD_ENTRY_OFFSET_MASK); + ret = add_layout_entry( + layout, spd->entries[j].name, + offset, offset + spd->entries[j].length - 1); + if (ret < 0) { + free(spd); + goto _free_layout_ret; + } + } + free(spd); + } + + ret = 0; + goto _free_bpdt_ret; + +_free_layout_ret: + free(*layout); +_free_bpdt_ret: + free(bpdt); + return ret; +} + +int layout_from_ifwi_rom(struct flashrom_layout **const layout, + struct flashrom_flashctx *const flashctx, + const size_t flash_offset) +{ + return layout_from_ifwi(layout, flash_offset, 0, flashctx->chip->total_size * 1024, + (int (*)(void *, uint8_t *, unsigned int, unsigned int))flashctx->chip->read, + flashctx); +} diff --git a/libflashrom.c b/libflashrom.c index f90a22c..96e34cc 100644 --- a/libflashrom.c +++ b/libflashrom.c @@ -30,6 +30,7 @@ #include "layout.h" #include "hwaccess.h" #include "ich_descriptors.h" +#include "ifwi.h" #include "libflashrom.h" /** @@ -383,6 +384,67 @@ #endif } +/** + * @brief Read a layout from the Intel IFWI in the flash. + * + * @param[out] layout Points to a struct flashrom_layout pointer that + * gets set if the descriptor is read and parsed + * successfully. + * @param[in] flashctx Flash context to read the descriptor from flash. + * + * @return 0 on success, + * 6 if descriptor parsing isn't implemented for the host, + * 3 if the data on flash couldn't be parsed, + * 2 if the data on flash couldn't be read, + * 1 on any other error. + */ +int flashrom_layout_read_from_ifwi(struct flashrom_layout **const layout, + struct flashrom_flashctx *const flashctx) +{ + struct flashrom_layout *ifd_layout; + unsigned int i; + int ret; + + ret = flashrom_layout_read_from_ifd(&ifd_layout, flashctx, NULL, 0); + if (ret) + return ret; + + for (i = 0; i < ifd_layout->num_entries; ++i) { + if (strcmp(ifd_layout->entries[i].name, "bios") == 0) + break; + } + if (i >= ifd_layout->num_entries) { + msg_gerr("Cannot find BIOS region in Intel Firmware Descriptor (IFD).\n"); + ret = 3; + goto _free_ifd_ret; + } + + msg_cinfo("Reading IFWI layout... "); + ret = layout_from_ifwi_rom(layout, flashctx, ifd_layout->entries[i].start); + switch (ret) { + case -4: /* Fall through. */ + case -3: + ret = 3; + break; + case -2: + ret = 2; + break; + case 0: + break; + default: + ret = 1; + break; + } + if (ret) + msg_cinfo("FAILED.\n"); + else + msg_cinfo("done.\n"); + +_free_ifd_ret: + free(ifd_layout); + return ret; +} + static int flashrom_layout_parse_fmap(struct flashrom_layout **layout, struct flashctx *const flashctx, const struct fmap *const fmap) { diff --git a/libflashrom.h b/libflashrom.h index 38c95d2..9ca7ea0 100644 --- a/libflashrom.h +++ b/libflashrom.h @@ -63,6 +63,7 @@ struct flashrom_layout; int flashrom_layout_read_from_ifd(struct flashrom_layout **, struct flashrom_flashctx *, const void *dump, size_t len); +int flashrom_layout_read_from_ifwi(struct flashrom_layout **, struct flashrom_flashctx *); int flashrom_layout_read_fmap_from_rom(struct flashrom_layout **, struct flashrom_flashctx *, off_t offset, size_t length); int flashrom_layout_read_fmap_from_buffer(struct flashrom_layout **layout, -- To view, visit https://review.coreboot.org/c/flashrom/+/31018 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I1f1ef4c5d109b81dec7a11bca04ba89204fa84eb Gerrit-Change-Number: 31018 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

3 6

Change in ...flashrom[master]: ifwi: Add definitions for the Integrated Firmware Image format
by Nico Huber (Code Review) Dec. 1, 2019

Dec. 1, 2019

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/flashrom/+/31017 Change subject: ifwi: Add definitions for the Integrated Firmware Image format ...................................................................... ifwi: Add definitions for the Integrated Firmware Image format The Integrated Firmware Image (IFWI) is used as a partitioning format on some Intel SoCs (e.g. Apollo Lake). It is not tied to NOR flashes, rather to have a common format between different types of boot media. Change-Id: I4bdf47637bfb68560e6d4269f89710572c1bb82a Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- A ifwi.h 1 file changed, 80 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/flashrom refs/changes/17/31017/1 diff --git a/ifwi.h b/ifwi.h new file mode 100644 index 0000000..622fccf --- /dev/null +++ b/ifwi.h @@ -0,0 +1,80 @@ +/* + * This file is part of the flashrom project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * The Integrated Firmware Image (IFWI) is used as a partitioning + * format on some Intel SoCs (e.g. Apollo Lake). It is not tied to + * NOR flashes, rather to have a common format between different + * types of boot media. + */ + +#ifndef __IFWI_H__ +#define __IFWI_H__ 1 + +#include <stdint.h> + +#include "layout.h" + +int layout_from_ifwi_rom(struct flashrom_layout **, struct flashrom_flashctx *, const size_t flash_offset); + +/*********** Boot Partition Descriptor Table (BPDT) ***********/ + +#define BPDT_ENTRY_LENGTH 12 + +struct bpdt_entry { /* points to a Sub-Partition */ + uint16_t type; + uint16_t flags; + uint32_t offset; /* from start of Logical Boot Partition */ + uint32_t size; +}; + +#define BPDT_SIGNATURE 0x000055aa +#define BPDT_HEADER_LENGTH 24 + +struct bpdt { + uint32_t signature; + uint16_t desc_count; + uint16_t version; + uint32_t xorsum; /* covers BPDT to S-BPDT (inclusive), iff there is + a redundant Logical Boot Partition, otherwise 0 */ + uint32_t ifwi_version; /* revision of this IFWI build */ + struct bpdt_entry entries[]; +}; + +/**************** Sub-Partition Directory (SPD) ***************/ + +#define SPD_ENTRY_OFFSET_MASK 0x01ffffff +#define SPD_ENTRY_LENGTH 24 + +struct spd_entry { + char name[12 + 1]; /* serialized as 12 chars w/o terminator */ + uint32_t offset; /* from start of the SPD header */ + uint32_t length; +}; + +#define SPD_MARKER 0x44504324 /* $CPD */ +#define SPD_MIN_HEADER_LENGTH 16 + +struct spd { + uint32_t marker; + uint32_t num_entries; + uint8_t header_version; + uint8_t entry_version; + uint8_t header_length; + uint8_t checksum; /* xor-sum covering header + entries */ + char name[4 + 1]; /* serialized as 4 chars w/o terminator */ + struct spd_entry entries[]; +}; + +#endif /* __IFWI_H__ */ -- To view, visit https://review.coreboot.org/c/flashrom/+/31017 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: flashrom Gerrit-Branch: master Gerrit-Change-Id: I4bdf47637bfb68560e6d4269f89710572c1bb82a Gerrit-Change-Number: 31017 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

5 8