hi, it seems that more and more boards are using PLCC chips instead of DIP chips. (http://www.ioss.com.tw/web/English/RD1BIOSSavior/SelectionChart.html) if DIP is used you can replace the onboard bios chip (normally 2mbit) by a 8mbyte (64mbit) (m-systems md-2800-d08 or md-2802-d08) DIP chip. that way you have the possability to put the kernel and a small rootfs directly into the bios chip. why cannot you do this if your board uses a PLCC chip? are there no PLCC chips with larger memory available? what types of PLCC chips are used? from which companies? -- niki w. waibel - system administrator @ newlogic technologies ag
hmmm - on http://www.epboard.com/ you can find a PLCC to DIP adapter. i'd like to know if it is possible to use E32-0041 (PLCC-32 to DIP-32 IC Adapter) on a epia-m board with a MD2802-D08 doc (m-systems). it seems that these chips have capacities of 2, 4, 8, 12, 24, 40, 72 MByte!!! niki On 05-Jul-2003 Niki Waibel wrote:
hi,
it seems that more and more boards are using PLCC chips instead of DIP chips. (http://www.ioss.com.tw/web/English/RD1BIOSSavior/SelectionChart.html)
if DIP is used you can replace the onboard bios chip (normally 2mbit) by a 8mbyte (64mbit) (m-systems md-2800-d08 or md-2802-d08) DIP chip. that way you have the possability to put the kernel and a small rootfs directly into the bios chip.
why cannot you do this if your board uses a PLCC chip? are there no PLCC chips with larger memory available? what types of PLCC chips are used? from which companies?
-- niki w. waibel - system administrator @ newlogic technologies ag
On Sat, 5 Jul 2003, Niki Waibel wrote:
hmmm - on http://www.epboard.com/ you can find a PLCC to DIP adapter.
i'd like to know if it is possible to use E32-0041 (PLCC-32 to DIP-32 IC Adapter) on a epia-m board with a MD2802-D08 doc (m-systems). it seems that these chips have capacities of 2, 4, 8, 12, 24, 40, 72 MByte!!!
you will have to write IPL code that can bring the chipset up in 256 instructions or less. ron
hmmm - on http://www.epboard.com/ you can find a PLCC to DIP adapter.
i'd like to know if it is possible to use E32-0041 (PLCC-32 to DIP-32 IC Adapter) on a epia-m board with a MD2802-D08 doc (m-systems). it seems that these chips have capacities of 2, 4, 8, 12, 24, 40, 72 MByte!!!
you will have to write IPL code that can bring the chipset up in 256 instructions or less.
i am quite new to all this. could you explain a bit more -- or give me some hints to written documentation? do you think it is possible to make that working? do you think it will be easy? niki
On Mon, 7 Jul 2003, Niki Waibel wrote:
i am quite new to all this. could you explain a bit more -- or give me some hints to written documentation?
take a look at the sis630 ipl.S code to get an idea. Then study the via vt8601 code for ram startup.
do you think it is possible to make that working?
not sure.
do you think it will be easy?
it's easier for some than others. For me, it's always hard. ron
On Sun, 2003-07-06 at 01:07, Niki Waibel wrote:
hmmm - on http://www.epboard.com/ you can find a PLCC to DIP adapter.
i'd like to know if it is possible to use E32-0041 (PLCC-32 to DIP-32 IC Adapter) on a epia-m board with a MD2802-D08 doc (m-systems). it seems that these chips have capacities of 2, 4, 8, 12, 24, 40, 72 MByte!!!
AKIAK, DoC doesn't come with PLCC package. This is the main reason we don't like a mb with PLCC socket. I may be wrong but doesn't epia-m come with 2 sockets one for Flash the other for DoC ? -- ollie lho <ollie@sis.com.tw>
On 07-Jul-2003 ollie lho wrote:
On Sun, 2003-07-06 at 01:07, Niki Waibel wrote:
hmmm - on http://www.epboard.com/ you can find a PLCC to DIP adapter.
i'd like to know if it is possible to use E32-0041 (PLCC-32 to DIP-32 IC Adapter) on a epia-m board with a MD2802-D08 doc (m-systems). it seems that these chips have capacities of 2, 4, 8, 12, 24, 40, 72 MByte!!!
AKIAK, DoC doesn't come with PLCC package. This is the main reason we don't like a mb with PLCC socket.
but there is this PLCC -> DIP converter from epboard. you can put the (dip) doc device onto that converter. then you can put it into the PLCC socket. see here: http://www.epboard.com/eproducts/protoadapter2.htm#PLCCtoDIPAdapter product number: E32-0041
I may be wrong but doesn't epia-m come with 2 sockets one for Flash the other for DoC ?
i ordered 2 boards -- will tell you soon :) but i think there is only 1 PLCC socket. (maybe the older boards had a DIP socket...)
* ollie lho <ollie@sis.com.tw> [030707 03:22]:
AKIAK, DoC doesn't come with PLCC package. This is the main reason we don't like a mb with PLCC socket.
I may be wrong but doesn't epia-m come with 2 sockets one for Flash the other for DoC ?
Mine (Epia-M 10000) only has 1 PLCC socket for 2/4MBit flash (no idea whether more is possible) Stefan -- Architecture Team SuSE Linux AG
Mine (Epia-M 10000) only has 1 PLCC socket for 2/4MBit flash (no idea whether more is possible) I think only EPIA has that socket. IIRC, Snapgear has got the driver for doc mil+, but I havn't seen anything yet. We have used a custom made DIP-PLCC adapter to connect DOC on EPIA, and Linux is able to see the DOC with mtd. However, we haven't done anything further.
-Andrew -- Andrew Ip Email: aip@cwlinux.com Tel: (852) 2542 2046 Fax: (852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. Tel: (852)2542 2046 Fax: (852)2542 2036 For public pgp key, please obtain it from http://www.keyserver.net/en.
Mine (Epia-M 10000) only has 1 PLCC socket for 2/4MBit flash (no idea whether more is possible) I think only EPIA has that socket. IIRC, Snapgear has got the driver for doc mil+, but I havn't seen anything yet. We have used a custom made DIP-PLCC adapter to connect DOC on EPIA, and Linux is able to see the DOC with mtd. However, we haven't done anything further.
"custom made DIP-PLCC": what did you customize? there is also http://www.epboard.com/eproducts/ezadapter.htm#DIP to PLCC Adapter product number: E32-0030 name: DIP-32 to PLCC-32 eZ-Reconfigurable IC Adapter which seems to be a pin reconfigurable adapter... andrew, do you think that the DIP chips could work with such an adapter? niki
Hi Niki,
"custom made DIP-PLCC": what did you customize? there is also http://www.epboard.com/eproducts/ezadapter.htm#DIP to PLCC Adapter product number: E32-0030 name: DIP-32 to PLCC-32 eZ-Reconfigurable IC Adapter which seems to be a pin reconfigurable adapter... andrew, do you think that the DIP chips could work with such an adapter? We have gotten a PCB design for this.
-Andrew -- Andrew Ip Email: aip@cwlinux.com Tel: (852) 2542 2046 Fax: (852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. Tel: (852)2542 2046 Fax: (852)2542 2036 For public pgp key, please obtain it from http://www.keyserver.net/en.
"custom made DIP-PLCC": what did you customize? there is also http://www.epboard.com/eproducts/ezadapter.htm#DIP to PLCC Adapter product number: E32-0030 name: DIP-32 to PLCC-32 eZ-Reconfigurable IC Adapter which seems to be a pin reconfigurable adapter... andrew, do you think that the DIP chips could work with such an adapter? We have gotten a PCB design for this. is it just pin switching, or is it more you have to do?
niki
On Mon, 2003-07-07 at 19:33, Andrew Ip wrote:
Mine (Epia-M 10000) only has 1 PLCC socket for 2/4MBit flash (no idea whether more is possible) I think only EPIA has that socket. IIRC, Snapgear has got the driver for doc mil+, but I havn't seen anything yet. We have used a custom made DIP-PLCC adapter to connect DOC on EPIA, and Linux is able to see the DOC with mtd. However, we haven't done anything further.
Is Snapgear's code GPLed ? -- ollie lho <ollie@sis.com.tw>
Is Snapgear's code GPLed ? Should be. Got this one from Linux Devices http://www.linuxdevices.com/news/NS9097179629.html
-Andrew -- Andrew Ip Email: aip@cwlinux.com Tel: (852) 2542 2046 Fax: (852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. Tel: (852)2542 2046 Fax: (852)2542 2036 For public pgp key, please obtain it from http://www.keyserver.net/en.
On Tue, 2003-07-08 at 16:28, Andrew Ip wrote:
Is Snapgear's code GPLed ? Should be. Got this one from Linux Devices http://www.linuxdevices.com/news/NS9097179629.html
Yea, I saw it on the MTD CVS. Wondering how M-system changed their mind. -- ollie lho <ollie@sis.com.tw>
participants (5)
-
Andrew Ip -
Niki Waibel -
ollie lho -
ron minnich -
Stefan Reinauer