Basically you need flash_rom to flash romimage. It can be built from cvs tree(freebios/util/flash_and_burn). Here is the step to flash, 1. enable flash writable $ setpci -s 0:11.0 40.b=54 2. flash romimage $ flash_rom romimage Hope this help. -Andrew On Tue, Dec 31, 2002 at 09:25:57PM -0000, Sorin Suciu wrote:

Hi, Can anyone help me with the procedures needed to setup LinuxBios for a VIA EPIA? Got the rom image and the kernel. I need to flash it but I haven't got the software. Is this process documented somewhere (as www.linuxbios.org ) does not seem to work and www.cwlinux.com documentation is not very explicit in this direction. Any help, suggestion would be greatly appreciated.. Thanks SS _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios

-- Andrew Ip Email: aip@cwlinux.com Tel: (852) 2542 2046 Fax: (852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. Tel: (852)2542 2046 Fax: (852)2542 2036 For public pgp key, please obtain it from http://www.keyserver.net/en.