Hi,

 

I think I have misspelled it. I will check it. I will also check the bios Information.   And Thanks for the information. I try contributing to this project.

Regards,

Gopinath

 

 

On Sun, Oct 29, 2006 at 02:13:56PM +0530, Jaganmohan, Gopinath (Cognizant) wrote:

> My super IO is Winbond chip W836275hfa

 

>>I cannot find any information on this chip. Are you you didn't mistype

this? Is it a w83627hf or w83627thf? Both of those are supported.

 

> And the bios is socket chip is SST 494003A 334cnh.

 

Can't find information on that either. Please check whether this list

contains your chip:

http://www.sst.com/products/datasheets.xhtml

 

 

> Please let me know how i can contribute so that Make is Intel 845GE North bridge to work.

 

If you have some experience with C and/or low-level programming, grab

the datasheet from

http://www.intel.com/design/chipsets/datashts/251924.htm

and start implementing ;-) Have a look at the existing 855PM code in

svn, my guess is that you can re-use some code.

 

 

Uwe.

--

http://www.hermann-uwe.de  | http://www.holsham-traders.de

http://www.crazy-hacks.org | http://www.unmaintained-free-software.org

From: Uwe Hermann [mailto:uwe@hermann-uwe.de]
Sent: Monday, October 30, 2006 2:00 AM
To: Jaganmohan, Gopinath (Cognizant)
Cc: linuxbios@linuxbios.org
Subject: Re: [LinuxBIOS] Chipset support

 

 

This e-mail and any files transmitted with it are for the sole use of the intended recipient(s) and may contain confidential and privileged information.
If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.
Any unauthorized review, use, disclosure, dissemination, forwarding, printing or copying of this email or any action taken in reliance on this e-mail is strictly
prohibited and may be unlawful.

Visit us at http://www.cognizant.com