April 2013 - coreboot - mail.coreboot.org

ASRock E350M1: GRUB payload does not create AHCI device
by Paul Menzel April 1, 2013

April 1, 2013

Dear coreboot folks, dear Vladimir, although this is a GRUB problem, I am posting this to the coreboot list as it is in the GRUB payload and I am not subscribed to the GRUB list. Currently using GRUB revision 4778 as a payload [1], loading the module `ahci` I see the following errors (formatted serial output, “garbled” one at the end) on the AMD SB800 based ASRock E350M1 [2]. grub> set debug=ahci,ata grub> insmod ahci disk/ahci.c:291: Requesting AHCI ownership disk/ahci.c:294: Waiting for BIOS to give up ownership disk/ahci.c:305: AHCI ownership obtained disk/ahci.c:311: AHCI is in compat mode. Switching disk/ahci.c:357: 6 AHCI ports disk/ahci.c:367: status 0:123 disk/ahci.c:184: found device ahci0 (port 0) disk/ahci.c:225: couldn't start CR grub> insmod ata grub> insmod mdraid grub> insmod mdraid09 grub> ls (memdisk) SeaBIOS has no problems finding the attached ATA drive. If more information is needed, please tell me what and how I can get it, and I will try to provide it. Thanks, Paul [1] http://www.coreboot.org/GRUB2 [2] http://www.coreboot.org/ASRock_E350M1 grub> ins set debug=ahci,ata grub> insom mot d ahci disk/ahci.c:291: Requesting AHCI ownership disk/ahci.c:294: Waiting for BIOS to give up ownership disk/ahci.c:305: AHCI ownership obtained disk/ahci.c:311: AHCI is in compat mode. Switching disk/ahci.c:357: 6 AHCI ports disk/ahci.c:367: status 0:123 disk/ahci.c:184: found device ahci0 (port 0) disk/ahci.c:225: couldn't start CR grub> insmod ata grub> insomd mod mdraid grub> insmod mdraid09 grub> ls (memdisk)

2 2

Trac reminder: list of new ticket(s)
by coreboot tracker April 1, 2013

April 1, 2013

1 0

Regarding: Error Unzipping coreboot + libpayload + coreinfo Ready-made QEMU images
by Pradish M P, ERS, HCLTech April 1, 2013

April 1, 2013

Dear Coreboot Folks http://www.coreboot.org/QEMU in this site, there are some readymade coreboot payloads , which I thought of using it to see the output. But when I tried to unzip the file Qemu_coreboot_coreinfo.zip, it throws an error. I am doing this because i was not able to compile libpayload, as libpayload makes use of coreinfo, I cannot use coreinfo as well. If you guys can upload a good working image of coreboot+libpayoad+coreinfo, that would be great!! Regards Pradish ::DISCLAIMER:: ---------------------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ----------------------------------------------------------------------------------------------------------------------------------------------------

1 0

Re: [coreboot] coreboot-libpayload 'size_t' conflicting type error
by Paul Menzel April 1, 2013

April 1, 2013

Dear Pradish, in my last message I asked you *not* to send any HTML messages! Additionally you did not reply to the list. Please use a decent mail client which has the option to reply to the list. (As a workaround you might use the reply to all feature. Am Mittwoch, den 27.03.2013, 13:08 +0530 schrieb Pradish MP: […] > but i get new errors > > pradish@pradish-VirtualBox:~/coreboot/payloads/libpayload$ make install > build/libpayload-config.h build/config.h differ: byte 93, line 4 > CC libpci/libpci.libpci.o > AR build/libpci.a > CC arch/x86/main.libc.o > CC arch/x86/sysinfo.libc.o > CC arch/x86/timer.libc.o > CC arch/x86/coreboot.libc.o > CC arch/x86/util.libc.o > CC arch/x86/exec.libc.o > CC arch/x86/virtual.libc.o > CC arch/x86/string.libc.o > CC arch/x86/multiboot.libc.o > CC crypto/sha1.libc.o > CC libc/malloc.libc.o > CC libc/printf.libc.o > CC libc/console.libc.o > CC libc/string.libc.o > In file included from libc/string.c:35:0: > include/inttypes.h:250:2: error: unknown type name 'intmax_t' > include/inttypes.h:251:2: error: unknown type name 'intmax_t' > include/inttypes.h:255:1: error: unknown type name 'intmax_t' > include/inttypes.h:255:1: warning: parameter names (without types) in function declaration [enabled by default] > include/inttypes.h:256:1: warning: parameter names (without types) in function declaration [enabled by default] > include/inttypes.h:257:1: error: unknown type name 'intmax_t' > include/inttypes.h:258:1: error: unknown type name 'uintmax_t' > libc/string.c: In function 'strtoul': > libc/string.c:542:12: error: 'UINT32_MAX' undeclared (first use in this function) > libc/string.c:542:12: note: each undeclared identifier is reported only once for each function it appears in > make: *** [build/libc/string.libc.o] Error 1 > > how to resolve this one? Thanks to Stefan Reinauer these errors should be fixed with the following commit. commit c7b6d7db092cfd925f1fb6333e166a54663310e7 Author: Stefan Reinauer <reinauer(a)chromium.org> Date: Mon Mar 25 15:03:41 2013 -0700 libpayload: Fix type issues There were a number of type issues in libpayload that sneaked in with 903f8e0. - size_t and ssize_t were conflicting with gcc builtins - some stdint types were used in libpayload but not defined in our stdint.h […] Reviewed-on: http://review.coreboot.org/2903 Please do `git remote update` and `git rebase origin/master` to get the latest revision and everything should be fine. […] Thanks, Paul

2 1

How do I set GEODE graphics and video?
by sergey April 1, 2013

April 1, 2013

Hello everybody, How do I set GEODE graphics and video? This question contains in FAQ [1]. But URL for driver is empty [2][3]. Where I can found driver for GEODE graphics and video? Thanks. Sergey [1] http://www.coreboot.org/FAQ#How_do_I_set_GEODE_graphics_and_video.3F [2] http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.23.y.git;a=tree;… [3] http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-amd.git;a=summary ----------------------------------------------------------------------

1 0