June 2012 - coreboot - mail.coreboot.org

New patch to review for coreboot: 691d404 Intel cpus: Extend cache to cover complete Flash Device
by Kyösti Mälkki June 28, 2012

June 28, 2012

Kyösti Mälkki (kyosti.malkki(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1146 -gerrit commit 691d404408da286b4ea0d2ea80c4d54de63b9b8f Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Thu Jun 28 21:37:45 2012 +0300 Intel cpus: Extend cache to cover complete Flash Device CACHE_ROM_SIZE default is ROM_SIZE, the Flash device size set in menuconfig. This fixes a case where 8 MB SPI flash MTRR setup would not cover the bottom 4 MB when ramstage is decompressed. Verify CACHE_ROM_SIZE has 4kB granularity. One may set CACHE_ROM_SIZE==0 to disable this cache. Change-Id: Ib2b4ea528a092b96ff954894e60406d64f250783 Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- src/cpu/intel/car/cache_as_ram_ht.inc | 9 +++++---- src/cpu/intel/model_206ax/cache_as_ram.inc | 8 ++++++-- src/cpu/intel/model_6ex/cache_as_ram.inc | 10 +++++++--- 3 files changed, 18 insertions(+), 9 deletions(-) diff --git a/src/cpu/intel/car/cache_as_ram_ht.inc b/src/cpu/intel/car/cache_as_ram_ht.inc index 4e0f391..dc1cfc9 100644 --- a/src/cpu/intel/car/cache_as_ram_ht.inc +++ b/src/cpu/intel/car/cache_as_ram_ht.inc @@ -30,9 +30,6 @@ #define LAPIC(x) $(LAPIC_DEFAULT_BASE | LAPIC_ ## x) #define START_IPI_VECTOR ((CONFIG_AP_SIPI_VECTOR >> 12) & 0xff) -/* Base address to cache all of Flash ROM, just below 4GB. */ -#define CACHE_ROM_BASE ((1<<22 - CONFIG_CACHE_ROM_SIZE>>10)<<10) - #define CACHE_AS_RAM_SIZE CONFIG_DCACHE_RAM_SIZE #define CACHE_AS_RAM_BASE CONFIG_DCACHE_RAM_BASE @@ -380,6 +377,9 @@ no_msr_11e: movl $(~(CONFIG_RAMTOP - 1) | MTRRphysMaskValid), %eax wrmsr +#if CONFIG_CACHE_ROM_SIZE +#define CACHE_ROM_SIZE (CONFIG_CACHE_ROM_SIZE & ~0x3ff) +#define CACHE_ROM_BASE ((1<<22 - CONFIG_CACHE_ROM_SIZE>>10)<<10) /* Enable caching and Speculative Reads for Flash ROM device. */ movl $MTRRphysBase_MSR(1), %ecx movl $(CACHE_ROM_BASE | MTRR_TYPE_WRPROT), %eax @@ -387,8 +387,9 @@ no_msr_11e: wrmsr movl $MTRRphysMask_MSR(1), %ecx rdmsr - movl $(~(CONFIG_CACHE_ROM_SIZE - 1) | MTRRphysMaskValid), %eax + movl $(~(CACHE_ROM_SIZE - 1) | MTRRphysMaskValid), %eax wrmsr +#endif post_code(0x39) diff --git a/src/cpu/intel/model_206ax/cache_as_ram.inc b/src/cpu/intel/model_206ax/cache_as_ram.inc index 33246ff..0a41482 100644 --- a/src/cpu/intel/model_206ax/cache_as_ram.inc +++ b/src/cpu/intel/model_206ax/cache_as_ram.inc @@ -259,17 +259,21 @@ before_romstage: movl $CPU_PHYSMASK_HI, %edx // 36bit address space wrmsr +#if CONFIG_CACHE_ROM_SIZE +#define CACHE_ROM_SIZE (CONFIG_CACHE_ROM_SIZE & ~0x3ff) +#define CACHE_ROM_BASE ((1<<22 - CONFIG_CACHE_ROM_SIZE>>10)<<10) /* Enable Caching and speculative Reads for the * complete ROM now that we actually have RAM. */ movl $MTRRphysBase_MSR(1), %ecx - movl $(0xffc00000 | MTRR_TYPE_WRPROT), %eax + movl $(CACHE_ROM_BASE | MTRR_TYPE_WRPROT), %eax xorl %edx, %edx wrmsr movl $MTRRphysMask_MSR(1), %ecx - movl $(~(4*1024*1024 - 1) | MTRRphysMaskValid), %eax + movl $(~(CACHE_ROM_SIZE - 1) | MTRRphysMaskValid), %eax movl $CPU_PHYSMASK_HI, %edx wrmsr +#endif post_code(0x39) diff --git a/src/cpu/intel/model_6ex/cache_as_ram.inc b/src/cpu/intel/model_6ex/cache_as_ram.inc index bdefb21..b134bfb 100644 --- a/src/cpu/intel/model_6ex/cache_as_ram.inc +++ b/src/cpu/intel/model_6ex/cache_as_ram.inc @@ -191,15 +191,19 @@ clear_mtrrs: movl $CPU_PHYSMASK_HI, %edx wrmsr - /* Enable caching and Speculative Reads for the last 4MB. */ +#if CONFIG_CACHE_ROM_SIZE +#define CACHE_ROM_SIZE (CONFIG_CACHE_ROM_SIZE & ~0x3ff) +#define CACHE_ROM_BASE ((1<<22 - CONFIG_CACHE_ROM_SIZE>>10)<<10) + /* Enable caching and Speculative Reads for Flash ROM device. */ movl $MTRRphysBase_MSR(1), %ecx - movl $(0xffc00000 | MTRR_TYPE_WRPROT), %eax + movl $(CACHE_ROM_BASE | MTRR_TYPE_WRPROT), %eax xorl %edx, %edx wrmsr movl $MTRRphysMask_MSR(1), %ecx - movl $(~(4 * 1024 * 1024 - 1) | MTRRphysMaskValid), %eax + movl $(~(CACHE_ROM_SIZE - 1) | MTRRphysMaskValid), %eax movl $CPU_PHYSMASK_HI, %edx wrmsr +#endif post_code(0x39)

1 0

Patch set updated for coreboot: 1a1ee0d Intel cpus: delete dead CAR code and whitespace fixes
by Kyösti Mälkki June 28, 2012

June 28, 2012

Kyösti Mälkki (kyosti.malkki(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/640 -gerrit commit 1a1ee0dc103c4b60da6aedf8f7ddfd0df88a7174 Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Thu Jun 28 12:16:12 2012 +0300 Intel cpus: delete dead CAR code and whitespace fixes A diff from model_6fx to model_106cx suggests there is little CORE2 specific code that was once considered useful to have. In its current status however, sockets supporting model_6fx use model_6ex CAR init, so that specific code is actually never used. Deletes file: model_6fx/cache_as_ram.inc Change-Id: I6c0204446fa98207e31f91895e1cf30fde42382c Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- src/cpu/intel/model_106cx/cache_as_ram.inc | 14 +-- src/cpu/intel/model_6ex/cache_as_ram.inc | 16 +-- src/cpu/intel/model_6fx/cache_as_ram.inc | 272 ---------------------------- 3 files changed, 3 insertions(+), 299 deletions(-) diff --git a/src/cpu/intel/model_106cx/cache_as_ram.inc b/src/cpu/intel/model_106cx/cache_as_ram.inc index 74d0a99..c626cd8 100644 --- a/src/cpu/intel/model_106cx/cache_as_ram.inc +++ b/src/cpu/intel/model_106cx/cache_as_ram.inc @@ -83,7 +83,7 @@ clear_mtrrs: wrmsr /* Enable cache (CR0.CD = 0, CR0.NW = 0). */ - movl %cr0, %eax + movl %cr0, %eax andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax invd movl %eax, %cr0 @@ -164,18 +164,6 @@ clear_mtrrs: post_code(0x31) invd -#if 0 - xorl %eax, %eax - xorl %edx, %edx - movl $MTRRphysBase_MSR(0), %ecx - wrmsr - movl $MTRRphysMask_MSR(0), %ecx - wrmsr - movl $MTRRphysBase_MSR(1), %ecx - wrmsr - movl $MTRRphysMask_MSR(1), %ecx - wrmsr -#endif post_code(0x33) diff --git a/src/cpu/intel/model_6ex/cache_as_ram.inc b/src/cpu/intel/model_6ex/cache_as_ram.inc index 6f13cd9..bdefb21 100644 --- a/src/cpu/intel/model_6ex/cache_as_ram.inc +++ b/src/cpu/intel/model_6ex/cache_as_ram.inc @@ -83,7 +83,7 @@ clear_mtrrs: wrmsr /* Enable cache (CR0.CD = 0, CR0.NW = 0). */ - movl %cr0, %eax + movl %cr0, %eax andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax invd movl %eax, %cr0 @@ -164,18 +164,6 @@ clear_mtrrs: post_code(0x31) invd -#if 0 - xorl %eax, %eax - xorl %edx, %edx - movl $MTRRphysBase_MSR(0), %ecx - wrmsr - movl $MTRRphysMask_MSR(0), %ecx - wrmsr - movl $MTRRphysBase_MSR(1), %ecx - wrmsr - movl $MTRRphysMask_MSR(1), %ecx - wrmsr -#endif post_code(0x33) @@ -193,7 +181,7 @@ clear_mtrrs: post_code(0x38) - /* Enable Write Back and Speculative Reads for the first 1MB. */ + /* Enable Write Back and Speculative Reads for low RAM. */ movl $MTRRphysBase_MSR(0), %ecx movl $(0x00000000 | MTRR_TYPE_WRBACK), %eax xorl %edx, %edx diff --git a/src/cpu/intel/model_6fx/cache_as_ram.inc b/src/cpu/intel/model_6fx/cache_as_ram.inc deleted file mode 100644 index d8d25a0..0000000 --- a/src/cpu/intel/model_6fx/cache_as_ram.inc +++ /dev/null @@ -1,272 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2000,2007 Ronald G. Minnich <rminnich(a)gmail.com> - * Copyright (C) 2007-2008 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <cpu/x86/stack.h> -#include <cpu/x86/mtrr.h> -#include <cpu/x86/cache.h> -#include <cpu/x86/post_code.h> - -#define CPU_PHYSMASK_HI (1 << (CONFIG_CPU_ADDR_BITS - 32) - 1) - -#define CACHE_AS_RAM_SIZE CONFIG_DCACHE_RAM_SIZE -#define CACHE_AS_RAM_BASE CONFIG_DCACHE_RAM_BASE - - /* Save the BIST result. */ - movl %eax, %ebp - -cache_as_ram: - post_code(0x20) - - /* Send INIT IPI to all excluding ourself. */ - movl $0x000C4500, %eax - movl $0xFEE00300, %esi - movl %eax, (%esi) - - /* Disable prefetchers */ - movl $0x01a0, %ecx - rdmsr - orl $((1 << 9) | (1 << 19)), %eax - orl $((1 << 5) | (1 << 7)), %edx - wrmsr - - /* Zero out all fixed range and variable range MTRRs. */ - movl $mtrr_table, %esi - movl $((mtrr_table_end - mtrr_table) / 2), %edi - xorl %eax, %eax - xorl %edx, %edx -clear_mtrrs: - movw (%esi), %bx - movzx %bx, %ecx - wrmsr - add $2, %esi - dec %edi - jnz clear_mtrrs - - /* Configure the default memory type to uncacheable. */ - movl $MTRRdefType_MSR, %ecx - rdmsr - andl $(~0x00000cff), %eax - wrmsr - - /* Set Cache-as-RAM base address. */ - movl $(MTRRphysBase_MSR(0)), %ecx - movl $(CACHE_AS_RAM_BASE | MTRR_TYPE_WRBACK), %eax - xorl %edx, %edx - wrmsr - - /* Set Cache-as-RAM mask. */ - movl $(MTRRphysMask_MSR(0)), %ecx - movl $(~(CACHE_AS_RAM_SIZE - 1) | MTRRphysMaskValid), %eax - movl $CPU_PHYSMASK_HI, %edx - wrmsr - - /* Enable MTRR. */ - movl $MTRRdefType_MSR, %ecx - rdmsr - orl $MTRRdefTypeEn, %eax - wrmsr - - /* Enable L2 cache. */ - movl $0x11e, %ecx - rdmsr - orl $(1 << 8), %eax - wrmsr - - /* Enable cache (CR0.CD = 0, CR0.NW = 0). */ - movl %cr0, %eax - andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax - invd - movl %eax, %cr0 - - /* Clear the cache memory reagion. */ - movl $CACHE_AS_RAM_BASE, %esi - movl %esi, %edi - movl $(CACHE_AS_RAM_SIZE / 4), %ecx - // movl $0x23322332, %eax - xorl %eax, %eax - rep stosl - - /* Enable Cache-as-RAM mode by disabling cache. */ - movl %cr0, %eax - orl $CR0_CacheDisable, %eax - movl %eax, %cr0 - -#if CONFIG_XIP_ROM_SIZE - /* Enable cache for our code in Flash because we do XIP here */ - movl $MTRRphysBase_MSR(1), %ecx - xorl %edx, %edx - /* - * IMPORTANT: The following calculation _must_ be done at runtime. See - * http://www.coreboot.org/pipermail/coreboot/2010-October/060855.html - */ - movl $copy_and_run, %eax - andl $(~(CONFIG_XIP_ROM_SIZE - 1)), %eax - orl $MTRR_TYPE_WRBACK, %eax - wrmsr - - movl $MTRRphysMask_MSR(1), %ecx - movl $CPU_PHYSMASK_HI, %edx - movl $(~(CONFIG_XIP_ROM_SIZE - 1) | MTRRphysMaskValid), %eax - wrmsr -#endif /* CONFIG_XIP_ROM_SIZE */ - - /* Enable cache. */ - movl %cr0, %eax - andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax - movl %eax, %cr0 - - /* Set up the stack pointer. */ -#if CONFIG_USBDEBUG - /* Leave some space for the struct ehci_debug_info. */ - movl $(CACHE_AS_RAM_BASE + CACHE_AS_RAM_SIZE - 4 - 128), %eax -#else - movl $(CACHE_AS_RAM_BASE + CACHE_AS_RAM_SIZE - 4), %eax -#endif - movl %eax, %esp - - /* Restore the BIST result. */ - movl %ebp, %eax - movl %esp, %ebp - pushl %eax - - post_code(0x23) - - /* Call romstage.c main function. */ - call main - - post_code(0x2f) - - post_code(0x30) - - /* Disable cache. */ - movl %cr0, %eax - orl $CR0_CacheDisable, %eax - movl %eax, %cr0 - - post_code(0x31) - - /* Disable MTRR. */ - movl $MTRRdefType_MSR, %ecx - rdmsr - andl $(~MTRRdefTypeEn), %eax - wrmsr - - post_code(0x31) - - invd -#if 0 - xorl %eax, %eax - xorl %edx, %edx - movl $MTRRphysBase_MSR(0), %ecx - wrmsr - movl $MTRRphysMask_MSR(0), %ecx - wrmsr - movl $MTRRphysBase_MSR(1), %ecx - wrmsr - movl $MTRRphysMask_MSR(1), %ecx - wrmsr -#endif - - post_code(0x33) - - /* Enable cache. */ - movl %cr0, %eax - andl $~(CR0_CacheDisable | CR0_NoWriteThrough), %eax - movl %eax, %cr0 - - post_code(0x36) - - /* Disable cache. */ - movl %cr0, %eax - orl $CR0_CacheDisable, %eax - movl %eax, %cr0 - - post_code(0x38) - - /* Enable Write Back and Speculative Reads for the first 1MB. */ - movl $MTRRphysBase_MSR(0), %ecx - movl $(0x00000000 | MTRR_TYPE_WRBACK), %eax - xorl %edx, %edx - wrmsr - movl $MTRRphysMask_MSR(0), %ecx - movl $(~(1024 * 1024 - 1) | MTRRphysMaskValid), %eax - movl $CPU_PHYSMASK_HI, %edx - wrmsr - - post_code(0x39) - - /* And enable cache again after setting MTRRs. */ - movl %cr0, %eax - andl $~(CR0_CacheDisable | CR0_NoWriteThrough), %eax - movl %eax, %cr0 - - post_code(0x3a) - - /* Enable MTRR. */ - movl $MTRRdefType_MSR, %ecx - rdmsr - orl $MTRRdefTypeEn, %eax - wrmsr - - post_code(0x3b) - - /* Enable prefetchers */ - movl $0x01a0, %ecx - rdmsr - andl $~((1 << 9) | (1 << 19)), %eax - andl $~((1 << 5) | (1 << 7)), %edx - wrmsr - - /* Invalidate the cache again. */ - invd - - post_code(0x3c) - - /* Clear boot_complete flag. */ - xorl %ebp, %ebp -__main: - post_code(POST_PREPARE_RAMSTAGE) - cld /* Clear direction flag. */ - - movl %ebp, %esi - - movl $ROMSTAGE_STACK, %esp - movl %esp, %ebp - pushl %esi - call copy_and_run - -.Lhlt: - post_code(POST_DEAD_CODE) - hlt - jmp .Lhlt - -mtrr_table: - /* Fixed MTRRs */ - .word 0x250, 0x258, 0x259 - .word 0x268, 0x269, 0x26A - .word 0x26B, 0x26C, 0x26D - .word 0x26E, 0x26F - /* Variable MTRRs */ - .word 0x200, 0x201, 0x202, 0x203 - .word 0x204, 0x205, 0x206, 0x207 - .word 0x208, 0x209, 0x20A, 0x20B - .word 0x20C, 0x20D, 0x20E, 0x20F -mtrr_table_end: -

1 0

Patch set updated for coreboot: da1f22a Intel cpus: use CPU_ADDR_BITS from Kconfig during CAR
by Kyösti Mälkki June 28, 2012

June 28, 2012

Kyösti Mälkki (kyosti.malkki(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/639 -gerrit commit da1f22a5d3b6a88b08de2289111c664d7a6126d1 Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Thu Jun 28 11:56:57 2012 +0300 Intel cpus: use CPU_ADDR_BITS from Kconfig during CAR Default CPU_ADDR_BITS is 36. For Atom (model_106cx) use 32. This model is known to fail execution-in-place (XIP) with the default 36. Pentium M should use 32, but doesn't even with this patch. Some Xeon and CORE(2) models should use 38 or 40. Change-Id: If604badcdc578c4f4bc7d30da2f61397ec0d754c Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- src/cpu/intel/model_106cx/Kconfig | 8 ++++++++ src/cpu/intel/model_106cx/cache_as_ram.inc | 3 +-- src/cpu/intel/model_6ex/cache_as_ram.inc | 3 +-- src/cpu/intel/model_6fx/cache_as_ram.inc | 3 +-- 4 files changed, 11 insertions(+), 6 deletions(-) diff --git a/src/cpu/intel/model_106cx/Kconfig b/src/cpu/intel/model_106cx/Kconfig index 09449cb..a08f85a 100644 --- a/src/cpu/intel/model_106cx/Kconfig +++ b/src/cpu/intel/model_106cx/Kconfig @@ -4,3 +4,11 @@ config CPU_INTEL_MODEL_106CX select SSE2 select UDELAY_LAPIC select AP_IN_SIPI_WAIT + +if CPU_INTEL_MODEL_106CX + +config CPU_ADDR_BITS + int + default 32 + +endif diff --git a/src/cpu/intel/model_106cx/cache_as_ram.inc b/src/cpu/intel/model_106cx/cache_as_ram.inc index e74e24c..74d0a99 100644 --- a/src/cpu/intel/model_106cx/cache_as_ram.inc +++ b/src/cpu/intel/model_106cx/cache_as_ram.inc @@ -23,8 +23,7 @@ #include <cpu/x86/cache.h> #include <cpu/x86/post_code.h> -#define CPU_MAXPHYADDR 32 -#define CPU_PHYSMASK_HI (1 << (CPU_MAXPHYADDR - 32) - 1) +#define CPU_PHYSMASK_HI (1 << (CONFIG_CPU_ADDR_BITS - 32) - 1) #define CACHE_AS_RAM_SIZE CONFIG_DCACHE_RAM_SIZE #define CACHE_AS_RAM_BASE CONFIG_DCACHE_RAM_BASE diff --git a/src/cpu/intel/model_6ex/cache_as_ram.inc b/src/cpu/intel/model_6ex/cache_as_ram.inc index 92337c8..6f13cd9 100644 --- a/src/cpu/intel/model_6ex/cache_as_ram.inc +++ b/src/cpu/intel/model_6ex/cache_as_ram.inc @@ -23,8 +23,7 @@ #include <cpu/x86/cache.h> #include <cpu/x86/post_code.h> -#define CPU_MAXPHYADDR 36 -#define CPU_PHYSMASK_HI (1 << (CPU_MAXPHYADDR - 32) - 1) +#define CPU_PHYSMASK_HI (1 << (CONFIG_CPU_ADDR_BITS - 32) - 1) #define CACHE_AS_RAM_SIZE CONFIG_DCACHE_RAM_SIZE #define CACHE_AS_RAM_BASE CONFIG_DCACHE_RAM_BASE diff --git a/src/cpu/intel/model_6fx/cache_as_ram.inc b/src/cpu/intel/model_6fx/cache_as_ram.inc index 61feb1d..d8d25a0 100644 --- a/src/cpu/intel/model_6fx/cache_as_ram.inc +++ b/src/cpu/intel/model_6fx/cache_as_ram.inc @@ -23,8 +23,7 @@ #include <cpu/x86/cache.h> #include <cpu/x86/post_code.h> -#define CPU_MAXPHYADDR 36 -#define CPU_PHYSMASK_HI (1 << (CPU_MAXPHYADDR - 32) - 1) +#define CPU_PHYSMASK_HI (1 << (CONFIG_CPU_ADDR_BITS - 32) - 1) #define CACHE_AS_RAM_SIZE CONFIG_DCACHE_RAM_SIZE #define CACHE_AS_RAM_BASE CONFIG_DCACHE_RAM_BASE

1 0

New patch to review for coreboot: 8f72aa9 libpayload: add controller type in usbdev_hc
by Anton Kochkov June 27, 2012

June 27, 2012

Anton Kochkov (anton.kochkov(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1145 -gerrit commit 8f72aa92f306ff96e50be72dc5bf2f3f89151ec8 Author: Anton Kochkov <anton.kochkov(a)gmail.com> Date: Thu Jun 28 08:30:15 2012 +0400 libpayload: add controller type in usbdev_hc Add controller type (UHCI, OHCI, EHCI or XHCI) into usbdev_hc (hci_t) struct, so now we know which type selected controller have. It needed to access controller specific data, if access usb tree outside of libpayload (e.g. in payload intself) Change-Id: I7df947bbb56a50d0d792ccd4d3a6b021ee95e2ea Signed-off-by: Anton Kochkov <anton.kochkov(a)gmail.com> --- payloads/libpayload/drivers/usb/ehci.c | 2 ++ payloads/libpayload/drivers/usb/ohci.c | 2 ++ payloads/libpayload/drivers/usb/uhci.c | 2 ++ payloads/libpayload/drivers/usb/xhci.c | 2 ++ payloads/libpayload/include/usb/usb.h | 3 +++ 5 files changed, 11 insertions(+), 0 deletions(-) diff --git a/payloads/libpayload/drivers/usb/ehci.c b/payloads/libpayload/drivers/usb/ehci.c index 8d84f8d..4d0a209 100644 --- a/payloads/libpayload/drivers/usb/ehci.c +++ b/payloads/libpayload/drivers/usb/ehci.c @@ -635,6 +635,8 @@ ehci_init (pcidev_t addr) pci_command = (pci_command | PCI_COMMAND_MEMORY) & ~PCI_COMMAND_IO ; pci_write_config32(addr, PCI_COMMAND, pci_command); + controller->type = EHCI; + controller->start = ehci_start; controller->stop = ehci_stop; controller->reset = ehci_reset; diff --git a/payloads/libpayload/drivers/usb/ohci.c b/payloads/libpayload/drivers/usb/ohci.c index 8a01cf2..81002bb 100644 --- a/payloads/libpayload/drivers/usb/ohci.c +++ b/payloads/libpayload/drivers/usb/ohci.c @@ -94,6 +94,8 @@ ohci_init (pcidev_t addr) controller->instance = malloc (sizeof (ohci_t)); if(!controller->instance) fatal("Not enough memory creating USB controller instance.\n"); + + controller->type = OHCI; controller->start = ohci_start; controller->stop = ohci_stop; diff --git a/payloads/libpayload/drivers/usb/uhci.c b/payloads/libpayload/drivers/usb/uhci.c index 78f7aba..312484c 100644 --- a/payloads/libpayload/drivers/usb/uhci.c +++ b/payloads/libpayload/drivers/usb/uhci.c @@ -146,6 +146,8 @@ uhci_init (pcidev_t addr) controller->instance = malloc (sizeof (uhci_t)); if(!controller->instance) fatal("Not enough memory creating USB controller instance.\n"); + + controller->type = UHCI; controller->start = uhci_start; controller->stop = uhci_stop; diff --git a/payloads/libpayload/drivers/usb/xhci.c b/payloads/libpayload/drivers/usb/xhci.c index a25cf40..828e0ea 100644 --- a/payloads/libpayload/drivers/usb/xhci.c +++ b/payloads/libpayload/drivers/usb/xhci.c @@ -63,6 +63,8 @@ xhci_init (pcidev_t addr) if(!controller->instance) fatal("Not enough memory creating USB controller instance.\n"); + controller->type = XHCI; + controller->start = xhci_start; controller->stop = xhci_stop; controller->reset = xhci_reset; diff --git a/payloads/libpayload/include/usb/usb.h b/payloads/libpayload/include/usb/usb.h index ecfee54..27af9bc 100644 --- a/payloads/libpayload/include/usb/usb.h +++ b/payloads/libpayload/include/usb/usb.h @@ -111,10 +111,13 @@ struct usbdev { void (*poll) (usbdev_t *dev); }; +typedef enum { OHCI = 0, UHCI = 1, EHCI = 2, XHCI = 3} hc_type; + struct usbdev_hc { struct usbdev_hc *next; pcidev_t bus_address; u32 reg_base; + hc_type type; usbdev_t *devices[128]; // dev 0 is root hub, 127 is last addressable void (*start) (hci_t *controller); void (*stop) (hci_t *controller);

1 0

New patch to review for coreboot: 0a2af45 libpayload: use correct types in UHCI driver
by Anton Kochkov June 27, 2012

June 27, 2012

Anton Kochkov (anton.kochkov(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1144 -gerrit commit 0a2af45778eb373d2e819b0c3c46e284265813ac Author: Anton Kochkov <anton.kochkov(a)gmail.com> Date: Thu Jun 28 08:19:41 2012 +0400 libpayload: use correct types in UHCI driver As we using 16-bit reading and writing in UHCI drive, so all variables related to that must be 16-bit too. Change-Id: Ib1abb03d054c167512e21f24f3c3da688c7fd01f Signed-off-by: Anton Kochkov <anton.kochkov(a)gmail.com> --- payloads/libpayload/drivers/usb/uhci_rh.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/payloads/libpayload/drivers/usb/uhci_rh.c b/payloads/libpayload/drivers/usb/uhci_rh.c index 4674608..a5661b0 100644 --- a/payloads/libpayload/drivers/usb/uhci_rh.c +++ b/payloads/libpayload/drivers/usb/uhci_rh.c @@ -86,7 +86,7 @@ uhci_rh_disable_port (usbdev_t *dev, int port) port = PORTSC1; uhci_reg_write16(controller, port, uhci_reg_read16(controller, port) & ~4); - int value; + u16 value; /* wait for controller to disable port */ /* TOTEST: how long to wait? 100ms for now */ int timeout = 200; /* time out after 200 * 500us == 100ms */ @@ -137,7 +137,7 @@ uhci_rh_scanport (usbdev_t *dev, int port) static int uhci_rh_report_port_changes (usbdev_t *dev) { - int stored, real; + u16 stored, real; stored = (RH_INST (dev)->port[0] == -1); real = ((uhci_reg_read16 (dev->controller, PORTSC1) & 1) == 0);

1 0

Patch set updated for coreboot: 1816569 Intel CPUs: execute microcode update only once per core
by Kyösti Mälkki June 27, 2012

June 27, 2012

Kyösti Mälkki (kyosti.malkki(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1142 -gerrit commit 18165693d04195d9fb80c13e1e420cb9be8991b6 Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Wed Jun 27 16:14:49 2012 +0300 Intel CPUs: execute microcode update only once per core Early HT-enabled CPUs do not serialize microcode updates within a core. Solve this by running microcode updates on the thread with the smallest lapic ID of a core only. Also set MTRRs once per core only. Change-Id: I6a3cc9ecec2d8e0caed29605a9b19ec35a817620 Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- src/cpu/intel/hyperthreading/intel_sibling.c | 21 +++++++++++++++++++++ src/cpu/intel/model_f2x/model_f2x_init.c | 12 ++++++++---- src/cpu/intel/model_f3x/model_f3x_init.c | 12 ++++++++---- src/cpu/intel/model_f4x/model_f4x_init.c | 12 ++++++++---- src/include/cpu/intel/hyperthreading.h | 1 + 5 files changed, 46 insertions(+), 12 deletions(-) diff --git a/src/cpu/intel/hyperthreading/intel_sibling.c b/src/cpu/intel/hyperthreading/intel_sibling.c index 2d2e105..b9a9ae7 100644 --- a/src/cpu/intel/hyperthreading/intel_sibling.c +++ b/src/cpu/intel/hyperthreading/intel_sibling.c @@ -14,6 +14,27 @@ static int first_time = 1; static int disable_siblings = !CONFIG_LOGICAL_CPUS; +/* Return true if running thread does not have the smallest lapic ID + * within a CPU core. + */ +int intel_ht_sibling(void) +{ + unsigned int core_ids, apic_ids, threads; + + apic_ids = 1; + if (cpuid_eax(0) >= 1) + apic_ids = (cpuid_ebx(1) >> 16) & 0xff; + if (apic_ids < 1) + apic_ids = 1; + + core_ids = 1; + if (cpuid_eax(0) >= 4) + core_ids += (cpuid_eax(4) >> 26) & 0x3f; + + threads = (apic_ids / core_ids); + return !!(lapicid() & (threads-1)); +} + void intel_sibling_init(device_t cpu) { unsigned i, siblings; diff --git a/src/cpu/intel/model_f2x/model_f2x_init.c b/src/cpu/intel/model_f2x/model_f2x_init.c index ec78672..8fd8abc 100644 --- a/src/cpu/intel/model_f2x/model_f2x_init.c +++ b/src/cpu/intel/model_f2x/model_f2x_init.c @@ -48,11 +48,15 @@ static void model_f2x_init(device_t cpu) { /* Turn on caching if we haven't already */ x86_enable_cache(); - x86_setup_mtrrs(); - x86_mtrr_check(); - /* Update the microcode */ - intel_update_microcode(microcode_updates); + if (!intel_ht_sibling()) { + /* MTRRs are shared between threads */ + x86_setup_mtrrs(); + x86_mtrr_check(); + + /* Update the microcode */ + intel_update_microcode(microcode_updates); + } /* Enable the local cpu apics */ setup_lapic(); diff --git a/src/cpu/intel/model_f3x/model_f3x_init.c b/src/cpu/intel/model_f3x/model_f3x_init.c index 580c98b..2504ba9 100644 --- a/src/cpu/intel/model_f3x/model_f3x_init.c +++ b/src/cpu/intel/model_f3x/model_f3x_init.c @@ -31,11 +31,15 @@ static void model_f3x_init(device_t cpu) { /* Turn on caching if we haven't already */ x86_enable_cache(); - x86_setup_mtrrs(); - x86_mtrr_check(); - /* Update the microcode */ - intel_update_microcode(microcode_updates); + if (!intel_ht_sibling()) { + /* MTRRs are shared between threads */ + x86_setup_mtrrs(); + x86_mtrr_check(); + + /* Update the microcode */ + intel_update_microcode(microcode_updates); + } /* Enable the local cpu apics */ setup_lapic(); diff --git a/src/cpu/intel/model_f4x/model_f4x_init.c b/src/cpu/intel/model_f4x/model_f4x_init.c index 54edf2e..f3f0b2a 100644 --- a/src/cpu/intel/model_f4x/model_f4x_init.c +++ b/src/cpu/intel/model_f4x/model_f4x_init.c @@ -39,11 +39,15 @@ static void model_f4x_init(device_t cpu) { /* Turn on caching if we haven't already */ x86_enable_cache(); - x86_setup_mtrrs(); - x86_mtrr_check(); - /* Update the microcode */ - intel_update_microcode(microcode_updates); + if (!intel_ht_sibling()) { + /* MTRRs are shared between threads */ + x86_setup_mtrrs(); + x86_mtrr_check(); + + /* Update the microcode */ + intel_update_microcode(microcode_updates); + } /* Enable the local cpu apics */ setup_lapic(); diff --git a/src/include/cpu/intel/hyperthreading.h b/src/include/cpu/intel/hyperthreading.h index 0a1461c..c84a6a7 100644 --- a/src/include/cpu/intel/hyperthreading.h +++ b/src/include/cpu/intel/hyperthreading.h @@ -3,5 +3,6 @@ struct device; void intel_sibling_init(struct device *cpu); +int intel_ht_sibling(void); #endif /* CPU_INTEL_HYPERTHREADING_H */

1 0

Patch set updated for coreboot: 01127c1 Use broadcast SIPI to startup siblings
by Sven Schnelle June 27, 2012

June 27, 2012

Sven Schnelle (svens(a)stackframe.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1139 -gerrit commit 01127c15695cdab7747a538941684d0be73465f5 Author: Sven Schnelle <svens(a)stackframe.org> Date: Sun Jun 17 10:32:55 2012 +0200 Use broadcast SIPI to startup siblings The current code for initializing AP cpus has several shortcomings: - it assumes APIC IDs are sequential - it uses only the BSP for determining the AP count, which is bad if there's more than one physical CPU, and CPUs are of different type Note that the new code call cpu->ops->init() in parallel, and therefore some CPU code needs to be changed to address that. One example are old Intel HT enabled CPUs which can't do microcode update in parallel. Change-Id: Ic48a1ebab6a7c52aa76765f497268af09fa38c25 Signed-off-by: Sven Schnelle <svens(a)stackframe.org> --- src/arch/x86/Kconfig | 4 - src/arch/x86/include/arch/cpu.h | 24 -- src/arch/x86/lib/cpu.c | 36 ++- src/cpu/amd/model_10xxx/init_cpus.c | 3 +- src/cpu/amd/model_fxx/init_cpus.c | 3 +- src/cpu/intel/hyperthreading/Makefile.inc | 1 - src/cpu/intel/hyperthreading/intel_sibling.c | 73 ----- src/cpu/intel/model_1067x/model_1067x_init.c | 4 - src/cpu/intel/model_106cx/Kconfig | 1 - src/cpu/intel/model_106cx/model_106cx_init.c | 4 - src/cpu/intel/model_206ax/Kconfig | 1 - src/cpu/intel/model_206ax/acpi.c | 9 +- src/cpu/intel/model_206ax/model_206ax_init.c | 55 ---- src/cpu/intel/model_6ex/Kconfig | 1 - src/cpu/intel/model_6ex/model_6ex_init.c | 3 - src/cpu/intel/model_6fx/Kconfig | 1 - src/cpu/intel/model_6fx/model_6fx_init.c | 3 - src/cpu/intel/model_f2x/model_f2x_init.c | 4 - src/cpu/intel/model_f3x/model_f3x_init.c | 4 - src/cpu/intel/model_f4x/model_f4x_init.c | 4 - src/cpu/intel/socket_LGA771/Kconfig | 1 - src/cpu/x86/lapic/lapic_cpu_init.c | 367 +++++--------------------- src/cpu/x86/lapic/secondary.S | 19 +- src/cpu/x86/pae/pgtbl.c | 12 + src/drivers/i2c/w83795/w83795.c | 5 +- src/include/cpu/cpu.h | 4 +- src/include/cpu/x86/lapic.h | 15 - src/include/device/path.h | 1 + 28 files changed, 134 insertions(+), 528 deletions(-) diff --git a/src/arch/x86/Kconfig b/src/arch/x86/Kconfig index 6d56ec6..4dfbe70 100644 --- a/src/arch/x86/Kconfig +++ b/src/arch/x86/Kconfig @@ -3,10 +3,6 @@ menu "Architecture (x86)" # This is an SMP option. It relates to starting up APs. # It is usually set in mainboard/*/Kconfig. # TODO: Improve description. -config AP_IN_SIPI_WAIT - bool - default n - depends on ARCH_X86 # Aligns 16bit entry code in bootblock so that hyper-threading CPUs # can boot AP CPUs to enable their shared caches. diff --git a/src/arch/x86/include/arch/cpu.h b/src/arch/x86/include/arch/cpu.h index 0dc92fb..0fe5ea5 100644 --- a/src/arch/x86/include/arch/cpu.h +++ b/src/arch/x86/include/arch/cpu.h @@ -158,30 +158,6 @@ struct cpu_driver { struct device; struct cpu_driver *find_cpu_driver(struct device *cpu); -struct cpu_info { - device_t cpu; - unsigned long index; -}; - -static inline struct cpu_info *cpu_info(void) -{ - struct cpu_info *ci; - __asm__("andl %%esp,%0; " - "orl %2, %0 " - :"=r" (ci) - : "0" (~(CONFIG_STACK_SIZE - 1)), - "r" (CONFIG_STACK_SIZE - sizeof(struct cpu_info)) - ); - return ci; -} - -static inline unsigned long cpu_index(void) -{ - struct cpu_info *ci; - ci = cpu_info(); - return ci->index; -} - struct cpuinfo_x86 { uint8_t x86; /* CPU family */ uint8_t x86_vendor; /* CPU vendor */ diff --git a/src/arch/x86/lib/cpu.c b/src/arch/x86/lib/cpu.c index 98ede06..520b2c6 100644 --- a/src/arch/x86/lib/cpu.c +++ b/src/arch/x86/lib/cpu.c @@ -9,6 +9,7 @@ #include <device/path.h> #include <device/device.h> #include <smp/spinlock.h> +#include <cpu/x86/lapic.h> /* Standard macro to see if a specific flag is changeable */ static inline int flag_is_changeable_p(uint32_t flag) @@ -234,7 +235,11 @@ static void set_cpu_ops(struct device *cpu) cpu->ops = driver ? driver->ops : NULL; } -void cpu_initialize(void) +#if CONFIG_SMP +static spinlock_t start_cpu_lock = SPIN_LOCK_UNLOCKED; +#endif + +void cpu_initialize(struct bus *cpu_bus) { /* Because we busy wait at the printk spinlock. * It is important to keep the number of printed messages @@ -242,17 +247,23 @@ void cpu_initialize(void) * disabled. */ struct device *cpu; - struct cpu_info *info; struct cpuinfo_x86 c; - - info = cpu_info(); - - printk(BIOS_INFO, "Initializing CPU #%ld\n", info->index); - - cpu = info->cpu; - if (!cpu) { - die("CPU: missing cpu device structure"); - } + struct device_path cpu_path; + static int cpu_index; + unsigned char id = lapicid(); + + cpu_path.type = DEVICE_PATH_APIC; + cpu_path.apic.apic_id = id; + +#if CONFIG_SMP + spin_lock(&start_cpu_lock); +#endif + cpu_path.apic.index = cpu_index++; + cpu = alloc_find_dev(cpu_bus, &cpu_path); +#if CONFIG_SMP + spin_unlock(&start_cpu_lock); +#endif + printk(BIOS_DEBUG, "Initializing CPU #%d\n", id); /* Find what type of cpu we are dealing with */ identify_cpu(cpu); @@ -276,7 +287,6 @@ void cpu_initialize(void) printk(BIOS_DEBUG, "Using generic cpu ops (good)\n"); } - /* Initialize the cpu */ if (cpu->ops && cpu->ops->init) { cpu->enabled = 1; @@ -284,7 +294,7 @@ void cpu_initialize(void) cpu->ops->init(cpu); } - printk(BIOS_INFO, "CPU #%ld initialized\n", info->index); + printk(BIOS_INFO, "CPU #%d initialized\n", id); return; } diff --git a/src/cpu/amd/model_10xxx/init_cpus.c b/src/cpu/amd/model_10xxx/init_cpus.c index e2a4a64..0ffce53 100644 --- a/src/cpu/amd/model_10xxx/init_cpus.c +++ b/src/cpu/amd/model_10xxx/init_cpus.c @@ -241,7 +241,8 @@ static void STOP_CAR_AND_CPU(void) disable_cache_as_ram(); // inline /* stop all cores except node0/core0 the bsp .... */ - stop_this_cpu(); + for(;;) + hlt(); } #if CONFIG_RAMINIT_SYSINFO diff --git a/src/cpu/amd/model_fxx/init_cpus.c b/src/cpu/amd/model_fxx/init_cpus.c index 7121642..d5e5800 100644 --- a/src/cpu/amd/model_fxx/init_cpus.c +++ b/src/cpu/amd/model_fxx/init_cpus.c @@ -190,7 +190,8 @@ static void STOP_CAR_AND_CPU(void) { disable_cache_as_ram(); // inline /* stop all cores except node0/core0 the bsp .... */ - stop_this_cpu(); + for(;;) + hlt(); } #if CONFIG_RAMINIT_SYSINFO diff --git a/src/cpu/intel/hyperthreading/Makefile.inc b/src/cpu/intel/hyperthreading/Makefile.inc deleted file mode 100644 index 8adbad9..0000000 --- a/src/cpu/intel/hyperthreading/Makefile.inc +++ /dev/null @@ -1 +0,0 @@ -ramstage-y += intel_sibling.c diff --git a/src/cpu/intel/hyperthreading/intel_sibling.c b/src/cpu/intel/hyperthreading/intel_sibling.c deleted file mode 100644 index 2d2e105..0000000 --- a/src/cpu/intel/hyperthreading/intel_sibling.c +++ /dev/null @@ -1,73 +0,0 @@ -#include <console/console.h> -#include <cpu/cpu.h> -#include <cpu/x86/lapic.h> -#include <cpu/intel/hyperthreading.h> -#include <device/device.h> -#include <pc80/mc146818rtc.h> -#include <smp/spinlock.h> -#include <assert.h> - -#if !CONFIG_SERIAL_CPU_INIT -#error Intel hyper-threading requires serialized cpu init -#endif - -static int first_time = 1; -static int disable_siblings = !CONFIG_LOGICAL_CPUS; - -void intel_sibling_init(device_t cpu) -{ - unsigned i, siblings; - struct cpuid_result result; - - /* On the bootstrap processor see if I want sibling cpus enabled */ - if (first_time) { - first_time = 0; - get_option(&disable_siblings, "hyper_threading"); - } - result = cpuid(1); - /* Is hyperthreading supported */ - if (!(result.edx & (1 << 28))) { - return; - } - /* See how many sibling cpus we have */ - siblings = (result.ebx >> 16) & 0xff; - if (siblings < 1) { - siblings = 1; - } - - printk(BIOS_DEBUG, "CPU: %u %d siblings\n", - cpu->path.apic.apic_id, - siblings); - - /* See if I am a sibling cpu */ - if (cpu->path.apic.apic_id & (siblings -1)) { - if (disable_siblings) { - cpu->enabled = 0; - } - return; - } - - /* I am the primary cpu start up my siblings */ - for(i = 1; i < siblings; i++) { - struct device_path cpu_path; - device_t new; - /* Build the cpu device path */ - cpu_path.type = DEVICE_PATH_APIC; - cpu_path.apic.apic_id = cpu->path.apic.apic_id + i; - - - /* Allocate new cpu device structure iff sibling CPU - * was not in static device tree. - */ - new = alloc_find_dev(cpu->bus, &cpu_path); - - if (!new) { - continue; - } - - printk(BIOS_DEBUG, "CPU: %u has sibling %u\n", - cpu->path.apic.apic_id, - new->path.apic.apic_id); - } -} - diff --git a/src/cpu/intel/model_1067x/model_1067x_init.c b/src/cpu/intel/model_1067x/model_1067x_init.c index c6d716d9..ddd1381 100644 --- a/src/cpu/intel/model_1067x/model_1067x_init.c +++ b/src/cpu/intel/model_1067x/model_1067x_init.c @@ -29,7 +29,6 @@ #include <cpu/x86/lapic.h> #include <cpu/intel/microcode.h> #include <cpu/intel/speedstep.h> -#include <cpu/intel/hyperthreading.h> #include <cpu/x86/cache.h> #include <cpu/x86/name.h> @@ -221,9 +220,6 @@ static void model_1067x_init(device_t cpu) /* PIC thermal sensor control */ configure_pic_thermal_sensors(); - - /* Start up my cpu siblings */ - intel_sibling_init(cpu); } static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/model_106cx/Kconfig b/src/cpu/intel/model_106cx/Kconfig index 09449cb..fe44024 100644 --- a/src/cpu/intel/model_106cx/Kconfig +++ b/src/cpu/intel/model_106cx/Kconfig @@ -3,4 +3,3 @@ config CPU_INTEL_MODEL_106CX select SMP select SSE2 select UDELAY_LAPIC - select AP_IN_SIPI_WAIT diff --git a/src/cpu/intel/model_106cx/model_106cx_init.c b/src/cpu/intel/model_106cx/model_106cx_init.c index 4bf2924..8d2ef3d 100644 --- a/src/cpu/intel/model_106cx/model_106cx_init.c +++ b/src/cpu/intel/model_106cx/model_106cx_init.c @@ -27,7 +27,6 @@ #include <cpu/x86/lapic.h> #include <cpu/intel/microcode.h> #include <cpu/intel/speedstep.h> -#include <cpu/intel/hyperthreading.h> #include <cpu/x86/cache.h> #include <cpu/x86/name.h> #include <usbdebug.h> @@ -178,9 +177,6 @@ static void model_106cx_init(device_t cpu) configure_misc(); /* TODO: PIC thermal sensor control */ - - /* Start up my cpu siblings */ - intel_sibling_init(cpu); } static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/model_206ax/Kconfig b/src/cpu/intel/model_206ax/Kconfig index d2d4c73..e3e4360 100644 --- a/src/cpu/intel/model_206ax/Kconfig +++ b/src/cpu/intel/model_206ax/Kconfig @@ -12,7 +12,6 @@ config CPU_SPECIFIC_OPTIONS select SSE2 select UDELAY_LAPIC select SMM_TSEG - #select AP_IN_SIPI_WAIT config BOOTBLOCK_CPU_INIT string diff --git a/src/cpu/intel/model_206ax/acpi.c b/src/cpu/intel/model_206ax/acpi.c index 6153174..dea23e7 100644 --- a/src/cpu/intel/model_206ax/acpi.c +++ b/src/cpu/intel/model_206ax/acpi.c @@ -26,6 +26,7 @@ #include <arch/acpigen.h> #include <arch/cpu.h> #include <cpu/x86/msr.h> +#include <cpu/x86/lapic.h> #include <cpu/intel/acpi.h> #include <cpu/intel/speedstep.h> #include <cpu/intel/turbo.h> @@ -88,8 +89,8 @@ static int generate_cstate_entries(acpi_cstate_t *cstates, static int generate_C_state_entries(void) { - struct cpu_info *info; struct cpu_driver *cpu; + struct device *cpu_dev; int len, lenif; device_t lapic; struct cpu_intel_model_206ax_config *conf = NULL; @@ -103,10 +104,10 @@ static int generate_C_state_entries(void) return 0; /* Find CPU map of supported C-states */ - info = cpu_info(); - if (!info) + cpu_dev = dev_find_lapic(lapicid()); + if (!cpu_dev) return 0; - cpu = find_cpu_driver(info->cpu); + cpu = find_cpu_driver(cpu_dev); if (!cpu || !cpu->cstates) return 0; diff --git a/src/cpu/intel/model_206ax/model_206ax_init.c b/src/cpu/intel/model_206ax/model_206ax_init.c index 874ce4d..d60c237 100644 --- a/src/cpu/intel/model_206ax/model_206ax_init.c +++ b/src/cpu/intel/model_206ax/model_206ax_init.c @@ -414,58 +414,6 @@ static void configure_mca(void) static unsigned ehci_debug_addr; #endif -/* - * Initialize any extra cores/threads in this package. - */ -static void intel_cores_init(device_t cpu) -{ - struct cpuid_result result; - unsigned cores, threads, i; - - result = cpuid_ext(0xb, 0); /* Threads per core */ - threads = result.ebx & 0xff; - - result = cpuid_ext(0xb, 1); /* Cores per package */ - cores = result.ebx & 0xff; - - /* Only initialize extra cores from BSP */ - if (cpu->path.apic.apic_id) - return; - - printk(BIOS_DEBUG, "CPU: %u has %u cores %u threads\n", - cpu->path.apic.apic_id, cores, threads); - - for (i = 1; i < cores; ++i) { - struct device_path cpu_path; - device_t new; - - /* Build the cpu device path */ - cpu_path.type = DEVICE_PATH_APIC; - cpu_path.apic.apic_id = - cpu->path.apic.apic_id + i; - - /* Update APIC ID if no hyperthreading */ - if (threads == 1) - cpu_path.apic.apic_id <<= 1; - - /* Allocate the new cpu device structure */ - new = alloc_dev(cpu->bus, &cpu_path); - if (!new) - continue; - - printk(BIOS_DEBUG, "CPU: %u has core %u\n", - cpu->path.apic.apic_id, - new->path.apic.apic_id); - - /* Start the new cpu */ - if (!start_cpu(new)) { - /* Record the error in cpu? */ - printk(BIOS_ERR, "CPU %u would not start!\n", - new->path.apic.apic_id); - } - } -} - static void model_206ax_init(device_t cpu) { char processor_name[49]; @@ -528,9 +476,6 @@ static void model_206ax_init(device_t cpu) /* Enable Turbo */ enable_turbo(); - - /* Start up extra cores */ - intel_cores_init(cpu); } static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/model_6ex/Kconfig b/src/cpu/intel/model_6ex/Kconfig index 31d24bd..c3faa39 100644 --- a/src/cpu/intel/model_6ex/Kconfig +++ b/src/cpu/intel/model_6ex/Kconfig @@ -3,4 +3,3 @@ config CPU_INTEL_MODEL_6EX select SMP select SSE2 select UDELAY_LAPIC - select AP_IN_SIPI_WAIT diff --git a/src/cpu/intel/model_6ex/model_6ex_init.c b/src/cpu/intel/model_6ex/model_6ex_init.c index 1c8c72b..a0afd2e 100644 --- a/src/cpu/intel/model_6ex/model_6ex_init.c +++ b/src/cpu/intel/model_6ex/model_6ex_init.c @@ -205,9 +205,6 @@ static void model_6ex_init(device_t cpu) /* PIC thermal sensor control */ configure_pic_thermal_sensors(); - - /* Start up my cpu siblings */ - intel_sibling_init(cpu); } static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/model_6fx/Kconfig b/src/cpu/intel/model_6fx/Kconfig index 851685c..065cdd9 100644 --- a/src/cpu/intel/model_6fx/Kconfig +++ b/src/cpu/intel/model_6fx/Kconfig @@ -3,4 +3,3 @@ config CPU_INTEL_MODEL_6FX select SMP select SSE2 select UDELAY_LAPIC - select AP_IN_SIPI_WAIT diff --git a/src/cpu/intel/model_6fx/model_6fx_init.c b/src/cpu/intel/model_6fx/model_6fx_init.c index 106719e..c5d7a6b 100644 --- a/src/cpu/intel/model_6fx/model_6fx_init.c +++ b/src/cpu/intel/model_6fx/model_6fx_init.c @@ -243,9 +243,6 @@ static void model_6fx_init(device_t cpu) /* PIC thermal sensor control */ configure_pic_thermal_sensors(); - - /* Start up my cpu siblings */ - intel_sibling_init(cpu); } static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/model_f2x/model_f2x_init.c b/src/cpu/intel/model_f2x/model_f2x_init.c index ec78672..51b72a3 100644 --- a/src/cpu/intel/model_f2x/model_f2x_init.c +++ b/src/cpu/intel/model_f2x/model_f2x_init.c @@ -7,7 +7,6 @@ #include <cpu/x86/msr.h> #include <cpu/x86/lapic.h> #include <cpu/intel/microcode.h> -#include <cpu/intel/hyperthreading.h> #include <cpu/x86/cache.h> /* 512KB cache */ @@ -56,9 +55,6 @@ static void model_f2x_init(device_t cpu) /* Enable the local cpu apics */ setup_lapic(); - - /* Start up my cpu siblings */ - intel_sibling_init(cpu); }; static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/model_f3x/model_f3x_init.c b/src/cpu/intel/model_f3x/model_f3x_init.c index 580c98b..ca346da 100644 --- a/src/cpu/intel/model_f3x/model_f3x_init.c +++ b/src/cpu/intel/model_f3x/model_f3x_init.c @@ -7,7 +7,6 @@ #include <cpu/x86/msr.h> #include <cpu/x86/lapic.h> #include <cpu/intel/microcode.h> -#include <cpu/intel/hyperthreading.h> #include <cpu/x86/cache.h> static uint32_t microcode_updates[] = { @@ -39,9 +38,6 @@ static void model_f3x_init(device_t cpu) /* Enable the local cpu apics */ setup_lapic(); - - /* Start up my cpu siblings */ - intel_sibling_init(cpu); }; static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/model_f4x/model_f4x_init.c b/src/cpu/intel/model_f4x/model_f4x_init.c index 54edf2e..c857cef 100644 --- a/src/cpu/intel/model_f4x/model_f4x_init.c +++ b/src/cpu/intel/model_f4x/model_f4x_init.c @@ -7,7 +7,6 @@ #include <cpu/x86/msr.h> #include <cpu/x86/lapic.h> #include <cpu/intel/microcode.h> -#include <cpu/intel/hyperthreading.h> #include <cpu/x86/cache.h> static uint32_t microcode_updates[] = { @@ -47,9 +46,6 @@ static void model_f4x_init(device_t cpu) /* Enable the local cpu apics */ setup_lapic(); - - /* Start up my cpu siblings */ - intel_sibling_init(cpu); }; static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/socket_LGA771/Kconfig b/src/cpu/intel/socket_LGA771/Kconfig index 62bd17b..f549210 100644 --- a/src/cpu/intel/socket_LGA771/Kconfig +++ b/src/cpu/intel/socket_LGA771/Kconfig @@ -3,4 +3,3 @@ config CPU_INTEL_SOCKET_LGA771 select CPU_INTEL_MODEL_6FX select SSE2 select MMX - select AP_IN_SIPI_WAIT diff --git a/src/cpu/x86/lapic/lapic_cpu_init.c b/src/cpu/x86/lapic/lapic_cpu_init.c index e491d46..60cacd5 100644 --- a/src/cpu/x86/lapic/lapic_cpu_init.c +++ b/src/cpu/x86/lapic/lapic_cpu_init.c @@ -66,31 +66,28 @@ static void copy_secondary_start_to_1m_below(void) printk(BIOS_DEBUG, "start_eip=0x%08lx, offset=0x%08lx, code_size=0x%08lx\n", start_eip, ((unsigned long)_secondary_start - start_eip), code_size); } -static int lapic_start_cpu(unsigned long apicid) +static struct bus *current_cpu_bus; + +static int lapic_start_cpus(struct bus *cpu_bus) { int timeout; unsigned long send_status, accept_status, start_eip; - int j, num_starts, maxlvt; + int maxlvt; /* * Starting actual IPI sequence... */ - printk(BIOS_SPEW, "Asserting INIT.\n"); - - /* - * Turn INIT on target chip - */ - lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(apicid)); + current_cpu_bus = cpu_bus; - /* - * Send IPI - */ + printk(BIOS_SPEW, "Asserting INIT.\n"); - lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_INT_ASSERT - | LAPIC_DM_INIT); + /* Send INIT SIPI to target chip */ + lapic_write_around(LAPIC_ICR2, 0); + lapic_write_around(LAPIC_ICR, LAPIC_INT_ASSERT + | LAPIC_DM_INIT | LAPIC_DEST_ALLBUT); - printk(BIOS_SPEW, "Waiting for send to finish...\n"); + printk(BIOS_DEBUG, "Waiting for send to finish...\n"); timeout = 0; do { printk(BIOS_SPEW, "+"); @@ -98,108 +95,67 @@ static int lapic_start_cpu(unsigned long apicid) send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; } while (send_status && (timeout++ < 1000)); if (timeout >= 1000) { - printk(BIOS_ERR, "CPU %ld: First apic write timed out. Disabling\n", - apicid); + printk(BIOS_DEBUG, "First apic write timed out. Disabling\n"); // too bad. - printk(BIOS_ERR, "ESR is 0x%lx\n", lapic_read(LAPIC_ESR)); + printk(BIOS_DEBUG, "ESR is 0x%lx\n", lapic_read(LAPIC_ESR)); if (lapic_read(LAPIC_ESR)) { - printk(BIOS_ERR, "Try to reset ESR\n"); + printk(BIOS_DEBUG, "Try to reset ESR\n"); lapic_write_around(LAPIC_ESR, 0); - printk(BIOS_ERR, "ESR is 0x%lx\n", lapic_read(LAPIC_ESR)); + printk(BIOS_DEBUG, "ESR is 0x%lx\n", lapic_read(LAPIC_ESR)); } return 0; } -#if !CONFIG_CPU_AMD_MODEL_10XXX && !CONFIG_CPU_INTEL_MODEL_206AX - mdelay(10); -#endif + start_eip = get_valid_start_eip((unsigned long)_secondary_start); + + maxlvt = 4; + + printk(BIOS_SPEW, "Sending STARTUP.\n"); + lapic_read_around(LAPIC_SPIV); + lapic_write(LAPIC_ESR, 0); + lapic_read(LAPIC_ESR); + printk(BIOS_SPEW, "After apic_write.\n"); - printk(BIOS_SPEW, "Deasserting INIT.\n"); + /* + * STARTUP IPI + */ /* Target chip */ - lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(apicid)); + lapic_write_around(LAPIC_ICR2, 0); - /* Send IPI */ - lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_DM_INIT); + /* Boot on the stack */ + /* Kick the second */ + lapic_write_around(LAPIC_ICR, LAPIC_INT_ASSERT | LAPIC_DM_STARTUP | LAPIC_DEST_ALLBUT + | (start_eip >> 12)); - printk(BIOS_SPEW, "Waiting for send to finish...\n"); + /* + * Give the other CPU some time to accept the IPI. + */ + udelay(300); + + printk(BIOS_DEBUG, "Startup point 1.\n"); + + printk(BIOS_DEBUG, "Waiting for send to finish...\n"); timeout = 0; do { - printk(BIOS_SPEW, "+"); + printk(BIOS_DEBUG, "+"); udelay(100); send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; } while (send_status && (timeout++ < 1000)); - if (timeout >= 1000) { - printk(BIOS_ERR, "CPU %ld: Second apic write timed out. Disabling\n", - apicid); - // too bad. - return 0; - } - - start_eip = get_valid_start_eip((unsigned long)_secondary_start); - -#if !CONFIG_CPU_AMD_MODEL_10XXX - num_starts = 2; -#else - num_starts = 1; -#endif /* - * Run STARTUP IPI loop. + * Give the other CPU some time to accept the IPI. */ - printk(BIOS_SPEW, "#startup loops: %d.\n", num_starts); - - maxlvt = 4; - - for (j = 1; j <= num_starts; j++) { - printk(BIOS_SPEW, "Sending STARTUP #%d to %lu.\n", j, apicid); + udelay(200); + /* + * Due to the Pentium erratum 3AP. + */ + if (maxlvt > 3) { lapic_read_around(LAPIC_SPIV); lapic_write(LAPIC_ESR, 0); - lapic_read(LAPIC_ESR); - printk(BIOS_SPEW, "After apic_write.\n"); - - /* - * STARTUP IPI - */ - - /* Target chip */ - lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(apicid)); - - /* Boot on the stack */ - /* Kick the second */ - lapic_write_around(LAPIC_ICR, LAPIC_DM_STARTUP - | (start_eip >> 12)); - - /* - * Give the other CPU some time to accept the IPI. - */ - udelay(300); - - printk(BIOS_SPEW, "Startup point 1.\n"); - - printk(BIOS_SPEW, "Waiting for send to finish...\n"); - timeout = 0; - do { - printk(BIOS_SPEW, "+"); - udelay(100); - send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; - } while (send_status && (timeout++ < 1000)); - - /* - * Give the other CPU some time to accept the IPI. - */ - udelay(200); - /* - * Due to the Pentium erratum 3AP. - */ - if (maxlvt > 3) { - lapic_read_around(LAPIC_SPIV); - lapic_write(LAPIC_ESR, 0); - } - accept_status = (lapic_read(LAPIC_ESR) & 0xEF); - if (send_status || accept_status) - break; } - printk(BIOS_SPEW, "After Startup.\n"); + accept_status = (lapic_read(LAPIC_ESR) & 0xEF); + + printk(BIOS_DEBUG, "After Startup.\n"); if (send_status) printk(BIOS_WARNING, "APIC never delivered???\n"); if (accept_status) @@ -209,156 +165,34 @@ static int lapic_start_cpu(unsigned long apicid) return 1; } + /* Number of cpus that are currently running in coreboot */ static atomic_t active_cpus = ATOMIC_INIT(1); -/* start_cpu_lock covers last_cpu_index and secondary_stack. - * Only starting one cpu at a time let's me remove the logic - * for select the stack from assembly language. - * - * In addition communicating by variables to the cpu I - * am starting allows me to veryify it has started before - * start_cpu returns. - */ - -static spinlock_t start_cpu_lock = SPIN_LOCK_UNLOCKED; -static unsigned last_cpu_index = 0; volatile unsigned long secondary_stack; +extern unsigned char _estack[]; -int start_cpu(device_t cpu) +static void stop_all_ap_cpus(void) { - extern unsigned char _estack[]; - struct cpu_info *info; - unsigned long stack_end; - unsigned long apicid; - unsigned long index; - unsigned long count; - int result; - - spin_lock(&start_cpu_lock); - - /* Get the cpu's apicid */ - apicid = cpu->path.apic.apic_id; - - /* Get an index for the new processor */ - index = ++last_cpu_index; - - /* Find end of the new processors stack */ - stack_end = ((unsigned long)_estack) - (CONFIG_STACK_SIZE*index) - sizeof(struct cpu_info); - - /* Record the index and which cpu structure we are using */ - info = (struct cpu_info *)stack_end; - info->index = index; - info->cpu = cpu; - - /* Advertise the new stack to start_cpu */ - secondary_stack = stack_end; - - /* Until the cpu starts up report the cpu is not enabled */ - cpu->enabled = 0; - cpu->initialized = 0; - - /* Start the cpu */ - result = lapic_start_cpu(apicid); - - if (result) { - result = 0; - /* Wait 1s or until the new cpu calls in */ - for(count = 0; count < 100000 ; count++) { - if (secondary_stack == 0) { - result = 1; - break; - } - udelay(10); - } - } - secondary_stack = 0; - spin_unlock(&start_cpu_lock); - return result; -} - -#if CONFIG_AP_IN_SIPI_WAIT - -/** - * Sending INIT IPI to self is equivalent of asserting #INIT with a bit of delay. - * An undefined number of instruction cycles will complete. All global locks - * must be released before INIT IPI and no printk is allowed after this. - * De-asserting INIT IPI is a no-op on later Intel CPUs. - * - * If you set DEBUG_HALT_SELF to 1, printk's after INIT IPI are enabled - * but running thread may halt without releasing the lock and effectively - * deadlock other CPUs. - */ -#define DEBUG_HALT_SELF 0 - -/** - * Normally this function is defined in lapic.h as an always inline function - * that just keeps the CPU in a hlt() loop. This does not work on all CPUs. - * I think all hyperthreading CPUs might need this version, but I could only - * verify this on the Intel Core Duo - */ -void stop_this_cpu(void) -{ - int timeout; unsigned long send_status; - unsigned long id; - - id = lapic_read(LAPIC_ID) >> 24; - - printk(BIOS_DEBUG, "CPU %ld going down...\n", id); - - /* send an LAPIC INIT to myself */ - lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(id)); - lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_INT_ASSERT | LAPIC_DM_INIT); + int timeout; + /* send an LAPIC INIT to all but myself */ + lapic_write_around(LAPIC_ICR2, 0); + lapic_write_around(LAPIC_ICR, LAPIC_INT_ASSERT | LAPIC_DM_INIT | LAPIC_DEST_ALLBUT); /* wait for the ipi send to finish */ -#if DEBUG_HALT_SELF printk(BIOS_SPEW, "Waiting for send to finish...\n"); -#endif timeout = 0; do { -#if DEBUG_HALT_SELF printk(BIOS_SPEW, "+"); -#endif udelay(100); send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; } while (send_status && (timeout++ < 1000)); if (timeout >= 1000) { -#if DEBUG_HALT_SELF printk(BIOS_ERR, "timed out\n"); -#endif } mdelay(10); - -#if DEBUG_HALT_SELF - printk(BIOS_SPEW, "Deasserting INIT.\n"); -#endif - /* Deassert the LAPIC INIT */ - lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(id)); - lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_DM_INIT); - -#if DEBUG_HALT_SELF - printk(BIOS_SPEW, "Waiting for send to finish...\n"); -#endif - timeout = 0; - do { -#if DEBUG_HALT_SELF - printk(BIOS_SPEW, "+"); -#endif - udelay(100); - send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; - } while (send_status && (timeout++ < 1000)); - if (timeout >= 1000) { -#if DEBUG_HALT_SELF - printk(BIOS_ERR, "timed out\n"); -#endif - } - - while(1) { - hlt(); - } } -#endif #ifdef __SSE3__ static __inline__ __attribute__((always_inline)) unsigned long readcr4(void) @@ -383,64 +217,19 @@ static __inline__ __attribute__((always_inline)) void writecr4(unsigned long Dat /* C entry point of secondary cpus */ void secondary_cpu_init(void) { - atomic_inc(&active_cpus); -#if CONFIG_SERIAL_CPU_INIT - spin_lock(&start_cpu_lock); -#endif - #ifdef __SSE3__ - /* - * Seems that CR4 was cleared when AP start via lapic_start_cpu() - * Turn on CR4.OSFXSR and CR4.OSXMMEXCPT when SSE options enabled - */ - u32 cr4_val; - cr4_val = readcr4(); - cr4_val |= (1 << 9 | 1 << 10); - writecr4(cr4_val); -#endif - cpu_initialize(); -#if CONFIG_SERIAL_CPU_INIT - spin_unlock(&start_cpu_lock); + /* + * Seems that CR4 was cleared when AP start via lapic_start_cpu() + * Turn on CR4.OSFXSR and CR4.OSXMMEXCPT when SSE options enabled + */ + u32 cr4_val; + cr4_val = readcr4(); + cr4_val |= (1 << 9 | 1 << 10); + writecr4(cr4_val); #endif - + atomic_inc(&active_cpus); + cpu_initialize(current_cpu_bus); atomic_dec(&active_cpus); - - stop_this_cpu(); -} - -static void start_other_cpus(struct bus *cpu_bus, device_t bsp_cpu) -{ - device_t cpu; - /* Loop through the cpus once getting them started */ - - for(cpu = cpu_bus->children; cpu ; cpu = cpu->sibling) { - if (cpu->path.type != DEVICE_PATH_APIC) { - continue; - } - #if !CONFIG_SERIAL_CPU_INIT - if(cpu==bsp_cpu) { - continue; - } - #endif - - if (!cpu->enabled) { - continue; - } - - if (cpu->initialized) { - continue; - } - - if (!start_cpu(cpu)) { - /* Record the error in cpu? */ - printk(BIOS_ERR, "CPU 0x%02x would not start!\n", - cpu->path.apic.apic_id); - } -#if CONFIG_SERIAL_CPU_INIT - udelay(10); -#endif - } - } static void wait_other_cpus_stop(struct bus *cpu_bus) @@ -473,6 +262,7 @@ static void wait_other_cpus_stop(struct bus *cpu_bus) cpu->path.apic.apic_id); } } + stop_all_ap_cpus(); printk(BIOS_DEBUG, "All AP CPUs stopped (%ld loops)\n", loopcount); } @@ -481,10 +271,6 @@ static void wait_other_cpus_stop(struct bus *cpu_bus) void initialize_cpus(struct bus *cpu_bus) { struct device_path cpu_path; - struct cpu_info *info; - - /* Find the info struct for this cpu */ - info = cpu_info(); #if NEED_LAPIC == 1 /* Ensure the local apic is enabled */ @@ -499,9 +285,6 @@ void initialize_cpus(struct bus *cpu_bus) cpu_path.cpu.id = 0; #endif - /* Find the device structure for the boot cpu */ - info->cpu = alloc_find_dev(cpu_bus, &cpu_path); - #if CONFIG_SMP copy_secondary_start_to_1m_below(); // why here? In case some day we can start core1 in amd_sibling_init #endif @@ -512,21 +295,11 @@ void initialize_cpus(struct bus *cpu_bus) cpus_ready_for_init(); -#if CONFIG_SMP - #if !CONFIG_SERIAL_CPU_INIT - /* start all aps at first, so we can init ECC all together */ - start_other_cpus(cpu_bus, info->cpu); - #endif -#endif - /* Initialize the bootstrap processor */ - cpu_initialize(); + cpu_initialize(cpu_bus); #if CONFIG_SMP - #if CONFIG_SERIAL_CPU_INIT - start_other_cpus(cpu_bus, info->cpu); - #endif - + lapic_start_cpus(cpu_bus); /* Now wait the rest of the cpus stop*/ wait_other_cpus_stop(cpu_bus); #endif diff --git a/src/cpu/x86/lapic/secondary.S b/src/cpu/x86/lapic/secondary.S index dc00b08..0ff68b6 100644 --- a/src/cpu/x86/lapic/secondary.S +++ b/src/cpu/x86/lapic/secondary.S @@ -2,7 +2,7 @@ #include <cpu/x86/lapic_def.h> .text - .globl _secondary_start, _secondary_start_end + .globl _secondary_start, _secondary_start_end, apcount .balign 4096 _secondary_start: .code16 @@ -38,10 +38,19 @@ _secondary_start: /* Load the Interrupt descriptor table */ lidt idtarg - /* Set the stack pointer, and flag that we are done */ - xorl %eax, %eax - movl secondary_stack, %esp - movl %eax, secondary_stack +apcount: + .long 0 + + /* increment our cpu index */ + movl $1, %eax + lock xadd %eax, apcount + incl %eax + + /* assign stack for this specific cpu */ + mov _stack, %esp + mov $CONFIG_STACK_SIZE, %ebx + mul %ebx + add %eax, %esp call secondary_cpu_init 1: hlt diff --git a/src/cpu/x86/pae/pgtbl.c b/src/cpu/x86/pae/pgtbl.c index 814c5f1..7aa17c2 100644 --- a/src/cpu/x86/pae/pgtbl.c +++ b/src/cpu/x86/pae/pgtbl.c @@ -3,8 +3,10 @@ */ #include <console/console.h> +#include <device/device.h> #include <cpu/cpu.h> #include <cpu/x86/pae.h> +#include <cpu/x86/lapic.h> #include <string.h> static void paging_off(void) @@ -43,6 +45,14 @@ static void paging_on(void *pdp) ); } +static int cpu_index(void) +{ + device_t dev = dev_find_lapic(lapicid()); + if (!dev) + return -1; + return dev->path.apic.index; +} + void *map_2M_page(unsigned long page) { struct pde { @@ -60,7 +70,9 @@ void *map_2M_page(unsigned long page) unsigned long window; void *result; int i; + index = cpu_index(); + if ((index < 0) || (index >= CONFIG_MAX_CPUS)) { return MAPPING_ERROR; } diff --git a/src/drivers/i2c/w83795/w83795.c b/src/drivers/i2c/w83795/w83795.c index 392471a..12be4da 100644 --- a/src/drivers/i2c/w83795/w83795.c +++ b/src/drivers/i2c/w83795/w83795.c @@ -22,6 +22,7 @@ #include <console/console.h> #include <device/device.h> #include "southbridge/amd/cimx/sb700/smbus.h" /*SMBUS_IO_BASE*/ +#include <cpu/x86/lapic.h> #include "w83795.h" static u32 w83795_set_bank(u8 bank) @@ -224,10 +225,8 @@ static void w83795_init(w83795_fan_mode_t mode, u8 dts_src) static void w83795_hwm_init(device_t dev) { struct device *cpu; - struct cpu_info *info; - info = cpu_info(); - cpu = info->cpu; + cpu = dev_find_lapic(lapicid()); if (!cpu) die("CPU: missing cpu device structure"); diff --git a/src/include/cpu/cpu.h b/src/include/cpu/cpu.h index c2113c1..120e955 100644 --- a/src/include/cpu/cpu.h +++ b/src/include/cpu/cpu.h @@ -4,11 +4,13 @@ #include <arch/cpu.h> #if !defined(__ROMCC__) -void cpu_initialize(void); +void cpu_initialize(struct bus *cpu_bus); struct bus; void initialize_cpus(struct bus *cpu_bus); void secondary_cpu_init(void); +extern unsigned int apcount; + #if !CONFIG_WAIT_BEFORE_CPUS_INIT #define cpus_ready_for_init() do {} while(0) #else diff --git a/src/include/cpu/x86/lapic.h b/src/include/cpu/x86/lapic.h index 078f2a7..ce61ee5 100644 --- a/src/include/cpu/x86/lapic.h +++ b/src/include/cpu/x86/lapic.h @@ -52,21 +52,6 @@ static inline __attribute__((always_inline)) unsigned long lapicid(void) } #ifndef __ROMCC__ -#if CONFIG_AP_IN_SIPI_WAIT != 1 -/* If we need to go back to sipi wait, we use the long non-inlined version of - * this function in lapic_cpu_init.c - */ -static inline __attribute__((always_inline)) void stop_this_cpu(void) -{ - /* Called by an AP when it is ready to halt and wait for a new task */ - for(;;) { - hlt(); - } -} -#else -void stop_this_cpu(void); -#endif - #if !defined(__PRE_RAM__) #define xchg(ptr,v) ((__typeof__(*(ptr)))__xchg((unsigned long)(v),(ptr),sizeof(*(ptr)))) diff --git a/src/include/device/path.h b/src/include/device/path.h index 63e9538..018fb93 100644 --- a/src/include/device/path.h +++ b/src/include/device/path.h @@ -40,6 +40,7 @@ struct apic_path unsigned apic_id; unsigned node_id; unsigned core_id; + unsigned index; }; struct apic_cluster_path

1 0

Patch set updated for coreboot: 7f1cbd6 remove CONFIG_SERIAL_CPU_INIT
by Sven Schnelle June 27, 2012

June 27, 2012

Sven Schnelle (svens(a)stackframe.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1140 -gerrit commit 7f1cbd68c8b1a50109bc12f67c0e1888b60d1a75 Author: Sven Schnelle <svens(a)stackframe.org> Date: Tue Jun 26 09:11:55 2012 +0200 remove CONFIG_SERIAL_CPU_INIT The new broadcast code doesn't support serial init - if a CPU needs serial init, this should be handled in the model specific CPU init code. Change-Id: I7cafb0af10d712366819ad0849f9b93558e9d46a Signed-off-by: Sven Schnelle <svens(a)stackframe.org> --- src/cpu/intel/model_206ax/Kconfig | 4 ---- src/cpu/x86/Kconfig | 4 ---- src/mainboard/advansus/a785e-i/Kconfig | 1 - src/mainboard/amd/bimini_fam10/Kconfig | 1 - src/mainboard/amd/dinar/Kconfig | 1 - src/mainboard/amd/inagua/Kconfig | 1 - src/mainboard/amd/mahogany_fam10/Kconfig | 1 - src/mainboard/amd/persimmon/Kconfig | 1 - src/mainboard/amd/serengeti_cheetah/Kconfig | 4 ---- src/mainboard/amd/serengeti_cheetah_fam10/Kconfig | 1 - src/mainboard/amd/south_station/Kconfig | 1 - src/mainboard/amd/tilapia_fam10/Kconfig | 1 - src/mainboard/amd/torpedo/Kconfig | 1 - src/mainboard/amd/union_station/Kconfig | 1 - src/mainboard/asrock/e350m1/Kconfig | 1 - src/mainboard/asus/m2n-e/Kconfig | 4 ---- src/mainboard/asus/m4a78-em/Kconfig | 1 - src/mainboard/asus/m4a785-m/Kconfig | 1 - src/mainboard/asus/m4a785t-m/Kconfig | 1 - src/mainboard/asus/m5a88-v/Kconfig | 1 - src/mainboard/avalue/eax-785e/Kconfig | 1 - src/mainboard/gigabyte/ga_2761gxdk/Kconfig | 4 ---- src/mainboard/gigabyte/m57sli/Kconfig | 4 ---- src/mainboard/gigabyte/ma785gm/Kconfig | 1 - src/mainboard/gigabyte/ma785gmt/Kconfig | 1 - src/mainboard/gigabyte/ma78gm/Kconfig | 1 - src/mainboard/ibm/e325/Kconfig | 4 ---- src/mainboard/ibm/e326/Kconfig | 4 ---- src/mainboard/iei/kino-780am2-fam10/Kconfig | 1 - src/mainboard/iwill/dk8_htx/Kconfig | 4 ---- src/mainboard/iwill/dk8s2/Kconfig | 4 ---- src/mainboard/iwill/dk8x/Kconfig | 4 ---- src/mainboard/jetway/pa78vm5/Kconfig | 1 - src/mainboard/msi/ms7260/Kconfig | 4 ---- src/mainboard/msi/ms9282/Kconfig | 4 ---- src/mainboard/msi/ms9652_fam10/Kconfig | 4 ---- src/mainboard/nvidia/l1_2pvv/Kconfig | 4 ---- src/mainboard/supermicro/h8dmr_fam10/Kconfig | 4 ---- src/mainboard/supermicro/h8qgi/Kconfig | 1 - src/mainboard/supermicro/h8qme_fam10/Kconfig | 4 ---- src/mainboard/supermicro/h8scm_fam10/Kconfig | 1 - src/mainboard/tyan/s2891/Kconfig | 1 - src/mainboard/tyan/s2892/Kconfig | 1 - src/mainboard/tyan/s2895/Kconfig | 1 - src/mainboard/tyan/s2912/Kconfig | 4 ---- src/mainboard/tyan/s2912_fam10/Kconfig | 4 ---- 46 files changed, 0 insertions(+), 103 deletions(-) diff --git a/src/cpu/intel/model_206ax/Kconfig b/src/cpu/intel/model_206ax/Kconfig index e3e4360..1b1b8ee 100644 --- a/src/cpu/intel/model_206ax/Kconfig +++ b/src/cpu/intel/model_206ax/Kconfig @@ -17,10 +17,6 @@ config BOOTBLOCK_CPU_INIT string default "cpu/intel/model_206ax/bootblock.c" -config SERIAL_CPU_INIT - bool - default n - config SMM_TSEG_SIZE hex default 0x800000 diff --git a/src/cpu/x86/Kconfig b/src/cpu/x86/Kconfig index 0eaee2e..de40c05 100644 --- a/src/cpu/x86/Kconfig +++ b/src/cpu/x86/Kconfig @@ -1,7 +1,3 @@ -config SERIAL_CPU_INIT - bool - default y - config WAIT_BEFORE_CPUS_INIT bool default n diff --git a/src/mainboard/advansus/a785e-i/Kconfig b/src/mainboard/advansus/a785e-i/Kconfig index 7f1d136..67b2bb4 100644 --- a/src/mainboard/advansus/a785e-i/Kconfig +++ b/src/mainboard/advansus/a785e-i/Kconfig @@ -20,7 +20,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_HARD_RESET select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select AMDMCT select HAVE_MP_TABLE select HAVE_ACPI_TABLES diff --git a/src/mainboard/amd/bimini_fam10/Kconfig b/src/mainboard/amd/bimini_fam10/Kconfig index 06ed977..8904a2d 100644 --- a/src/mainboard/amd/bimini_fam10/Kconfig +++ b/src/mainboard/amd/bimini_fam10/Kconfig @@ -20,7 +20,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_MAINBOARD_RESOURCES select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select AMDMCT select GENERATE_ACPI_TABLES select BOARD_ROMSIZE_KB_2048 diff --git a/src/mainboard/amd/dinar/Kconfig b/src/mainboard/amd/dinar/Kconfig index c81ccfa..e652bc7 100644 --- a/src/mainboard/amd/dinar/Kconfig +++ b/src/mainboard/amd/dinar/Kconfig @@ -31,7 +31,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select SUPERIO_SMSC_SCH4037 select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select BOARD_ROMSIZE_KB_2048 select BOARD_HAS_FADT select HAVE_BUS_CONFIG diff --git a/src/mainboard/amd/inagua/Kconfig b/src/mainboard/amd/inagua/Kconfig index a9c2de4..1b6b900 100644 --- a/src/mainboard/amd/inagua/Kconfig +++ b/src/mainboard/amd/inagua/Kconfig @@ -35,7 +35,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_HARD_RESET select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select AMDMCT select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_2048 diff --git a/src/mainboard/amd/mahogany_fam10/Kconfig b/src/mainboard/amd/mahogany_fam10/Kconfig index 8343fca..4a7196f 100644 --- a/src/mainboard/amd/mahogany_fam10/Kconfig +++ b/src/mainboard/amd/mahogany_fam10/Kconfig @@ -17,7 +17,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_MAINBOARD_RESOURCES select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select AMDMCT select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_1024 diff --git a/src/mainboard/amd/persimmon/Kconfig b/src/mainboard/amd/persimmon/Kconfig index e1f43b1..46f5ad4 100644 --- a/src/mainboard/amd/persimmon/Kconfig +++ b/src/mainboard/amd/persimmon/Kconfig @@ -36,7 +36,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_HARD_RESET select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select AMDMCT select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_4096 diff --git a/src/mainboard/amd/serengeti_cheetah/Kconfig b/src/mainboard/amd/serengeti_cheetah/Kconfig index f2f4b54..58e3c87 100644 --- a/src/mainboard/amd/serengeti_cheetah/Kconfig +++ b/src/mainboard/amd/serengeti_cheetah/Kconfig @@ -76,10 +76,6 @@ config HT_CHAIN_UNITID_BASE hex default 0xa -config SERIAL_CPU_INIT - bool - default n - config IRQ_SLOT_COUNT int default 11 diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/Kconfig b/src/mainboard/amd/serengeti_cheetah_fam10/Kconfig index e633758..eda9614 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/Kconfig +++ b/src/mainboard/amd/serengeti_cheetah_fam10/Kconfig @@ -16,7 +16,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_PIRQ_TABLE select HAVE_MP_TABLE select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select SERIAL_CPU_INIT select AMDMCT select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_1024 diff --git a/src/mainboard/amd/south_station/Kconfig b/src/mainboard/amd/south_station/Kconfig index c482ab0..6cf8860 100644 --- a/src/mainboard/amd/south_station/Kconfig +++ b/src/mainboard/amd/south_station/Kconfig @@ -35,7 +35,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_HARD_RESET select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select AMDMCT select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_4096 diff --git a/src/mainboard/amd/tilapia_fam10/Kconfig b/src/mainboard/amd/tilapia_fam10/Kconfig index 2c29f45..3a57779 100644 --- a/src/mainboard/amd/tilapia_fam10/Kconfig +++ b/src/mainboard/amd/tilapia_fam10/Kconfig @@ -17,7 +17,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_MAINBOARD_RESOURCES select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select AMDMCT select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_1024 diff --git a/src/mainboard/amd/torpedo/Kconfig b/src/mainboard/amd/torpedo/Kconfig index bc4030c..b923fa7 100644 --- a/src/mainboard/amd/torpedo/Kconfig +++ b/src/mainboard/amd/torpedo/Kconfig @@ -38,7 +38,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_HARD_RESET select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select AMDMCT select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_2048 diff --git a/src/mainboard/amd/union_station/Kconfig b/src/mainboard/amd/union_station/Kconfig index e7c2150..ae1856a 100644 --- a/src/mainboard/amd/union_station/Kconfig +++ b/src/mainboard/amd/union_station/Kconfig @@ -34,7 +34,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_HARD_RESET select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select AMDMCT select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_2048 diff --git a/src/mainboard/asrock/e350m1/Kconfig b/src/mainboard/asrock/e350m1/Kconfig index 6f4ce0f..637df91 100644 --- a/src/mainboard/asrock/e350m1/Kconfig +++ b/src/mainboard/asrock/e350m1/Kconfig @@ -36,7 +36,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_HARD_RESET select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select AMDMCT select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_4096 diff --git a/src/mainboard/asus/m2n-e/Kconfig b/src/mainboard/asus/m2n-e/Kconfig index 1f92097..d5fe8d7 100644 --- a/src/mainboard/asus/m2n-e/Kconfig +++ b/src/mainboard/asus/m2n-e/Kconfig @@ -93,8 +93,4 @@ config HT_CHAIN_END_UNITID_BASE hex default 0x20 -config SERIAL_CPU_INIT - bool - default n - endif # BOARD_ASUS_M2N_E diff --git a/src/mainboard/asus/m4a78-em/Kconfig b/src/mainboard/asus/m4a78-em/Kconfig index 516308f..cc1e0b1 100644 --- a/src/mainboard/asus/m4a78-em/Kconfig +++ b/src/mainboard/asus/m4a78-em/Kconfig @@ -15,7 +15,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_MP_TABLE select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select AMDMCT select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_1024 diff --git a/src/mainboard/asus/m4a785-m/Kconfig b/src/mainboard/asus/m4a785-m/Kconfig index ec3a488..09864ea 100644 --- a/src/mainboard/asus/m4a785-m/Kconfig +++ b/src/mainboard/asus/m4a785-m/Kconfig @@ -16,7 +16,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_MP_TABLE select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select AMDMCT select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_1024 diff --git a/src/mainboard/asus/m4a785t-m/Kconfig b/src/mainboard/asus/m4a785t-m/Kconfig index 727ae0c..b22f825 100644 --- a/src/mainboard/asus/m4a785t-m/Kconfig +++ b/src/mainboard/asus/m4a785t-m/Kconfig @@ -17,7 +17,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_MP_TABLE select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select AMDMCT select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_1024 diff --git a/src/mainboard/asus/m5a88-v/Kconfig b/src/mainboard/asus/m5a88-v/Kconfig index 9cadcde..7a9fcc8 100644 --- a/src/mainboard/asus/m5a88-v/Kconfig +++ b/src/mainboard/asus/m5a88-v/Kconfig @@ -18,7 +18,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_HARD_RESET select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select AMDMCT select HAVE_MP_TABLE select HAVE_ACPI_TABLES diff --git a/src/mainboard/avalue/eax-785e/Kconfig b/src/mainboard/avalue/eax-785e/Kconfig index aabd724..75d57d3 100644 --- a/src/mainboard/avalue/eax-785e/Kconfig +++ b/src/mainboard/avalue/eax-785e/Kconfig @@ -20,7 +20,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_HARD_RESET select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select AMDMCT select HAVE_MP_TABLE select HAVE_ACPI_TABLES diff --git a/src/mainboard/gigabyte/ga_2761gxdk/Kconfig b/src/mainboard/gigabyte/ga_2761gxdk/Kconfig index d47344b..e7175aa 100644 --- a/src/mainboard/gigabyte/ga_2761gxdk/Kconfig +++ b/src/mainboard/gigabyte/ga_2761gxdk/Kconfig @@ -73,10 +73,6 @@ config HT_CHAIN_END_UNITID_BASE hex default 0x20 -config SERIAL_CPU_INIT - bool - default n - config IRQ_SLOT_COUNT int default 11 diff --git a/src/mainboard/gigabyte/m57sli/Kconfig b/src/mainboard/gigabyte/m57sli/Kconfig index 0c8fc1b..47e07f8 100644 --- a/src/mainboard/gigabyte/m57sli/Kconfig +++ b/src/mainboard/gigabyte/m57sli/Kconfig @@ -77,10 +77,6 @@ config HT_CHAIN_END_UNITID_BASE hex default 0x20 -config SERIAL_CPU_INIT - bool - default n - config IRQ_SLOT_COUNT int default 11 diff --git a/src/mainboard/gigabyte/ma785gm/Kconfig b/src/mainboard/gigabyte/ma785gm/Kconfig index 0e8011b..1f6333d 100644 --- a/src/mainboard/gigabyte/ma785gm/Kconfig +++ b/src/mainboard/gigabyte/ma785gm/Kconfig @@ -17,7 +17,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_MAINBOARD_RESOURCES select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select AMDMCT select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_1024 diff --git a/src/mainboard/gigabyte/ma785gmt/Kconfig b/src/mainboard/gigabyte/ma785gmt/Kconfig index 0605a39..4ce6702 100644 --- a/src/mainboard/gigabyte/ma785gmt/Kconfig +++ b/src/mainboard/gigabyte/ma785gmt/Kconfig @@ -17,7 +17,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_MAINBOARD_RESOURCES select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select AMDMCT select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_1024 diff --git a/src/mainboard/gigabyte/ma78gm/Kconfig b/src/mainboard/gigabyte/ma78gm/Kconfig index 1b6966e..3152e8b 100644 --- a/src/mainboard/gigabyte/ma78gm/Kconfig +++ b/src/mainboard/gigabyte/ma78gm/Kconfig @@ -17,7 +17,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_MAINBOARD_RESOURCES select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select AMDMCT select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_1024 diff --git a/src/mainboard/ibm/e325/Kconfig b/src/mainboard/ibm/e325/Kconfig index 48b93d1..9ef4c48 100644 --- a/src/mainboard/ibm/e325/Kconfig +++ b/src/mainboard/ibm/e325/Kconfig @@ -61,10 +61,6 @@ config HT_CHAIN_UNITID_BASE hex default 0x1 -config SERIAL_CPU_INIT - bool - default n - config IRQ_SLOT_COUNT int default 12 diff --git a/src/mainboard/ibm/e326/Kconfig b/src/mainboard/ibm/e326/Kconfig index 81c10ba..475cb85 100644 --- a/src/mainboard/ibm/e326/Kconfig +++ b/src/mainboard/ibm/e326/Kconfig @@ -61,10 +61,6 @@ config HT_CHAIN_UNITID_BASE hex default 0x1 -config SERIAL_CPU_INIT - bool - default n - config IRQ_SLOT_COUNT int default 12 diff --git a/src/mainboard/iei/kino-780am2-fam10/Kconfig b/src/mainboard/iei/kino-780am2-fam10/Kconfig index 01a2429..d42710a 100644 --- a/src/mainboard/iei/kino-780am2-fam10/Kconfig +++ b/src/mainboard/iei/kino-780am2-fam10/Kconfig @@ -17,7 +17,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_MAINBOARD_RESOURCES select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select AMDMCT select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_1024 diff --git a/src/mainboard/iwill/dk8_htx/Kconfig b/src/mainboard/iwill/dk8_htx/Kconfig index 3785b11..5ad70f3 100644 --- a/src/mainboard/iwill/dk8_htx/Kconfig +++ b/src/mainboard/iwill/dk8_htx/Kconfig @@ -54,10 +54,6 @@ config HT_CHAIN_UNITID_BASE hex default 0xa -config SERIAL_CPU_INIT - bool - default n - config IRQ_SLOT_COUNT int default 11 diff --git a/src/mainboard/iwill/dk8s2/Kconfig b/src/mainboard/iwill/dk8s2/Kconfig index 1c35cb2..7fda0a6 100644 --- a/src/mainboard/iwill/dk8s2/Kconfig +++ b/src/mainboard/iwill/dk8s2/Kconfig @@ -51,10 +51,6 @@ config HT_CHAIN_UNITID_BASE hex default 0x1 -config SERIAL_CPU_INIT - bool - default n - config IRQ_SLOT_COUNT int default 12 diff --git a/src/mainboard/iwill/dk8x/Kconfig b/src/mainboard/iwill/dk8x/Kconfig index 9216078..452b6e6 100644 --- a/src/mainboard/iwill/dk8x/Kconfig +++ b/src/mainboard/iwill/dk8x/Kconfig @@ -50,10 +50,6 @@ config HT_CHAIN_UNITID_BASE hex default 0x1 -config SERIAL_CPU_INIT - bool - default n - config IRQ_SLOT_COUNT int default 9 diff --git a/src/mainboard/jetway/pa78vm5/Kconfig b/src/mainboard/jetway/pa78vm5/Kconfig index fa39039..2d9cb21 100644 --- a/src/mainboard/jetway/pa78vm5/Kconfig +++ b/src/mainboard/jetway/pa78vm5/Kconfig @@ -17,7 +17,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_MAINBOARD_RESOURCES select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select AMDMCT select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_1024 diff --git a/src/mainboard/msi/ms7260/Kconfig b/src/mainboard/msi/ms7260/Kconfig index 18f6e6f..09e5d21 100644 --- a/src/mainboard/msi/ms7260/Kconfig +++ b/src/mainboard/msi/ms7260/Kconfig @@ -75,10 +75,6 @@ config HT_CHAIN_END_UNITID_BASE hex default 0x20 -config SERIAL_CPU_INIT - bool - default n - config IRQ_SLOT_COUNT int default 11 diff --git a/src/mainboard/msi/ms9282/Kconfig b/src/mainboard/msi/ms9282/Kconfig index f4bc059..374f1a3 100644 --- a/src/mainboard/msi/ms9282/Kconfig +++ b/src/mainboard/msi/ms9282/Kconfig @@ -69,10 +69,6 @@ config HT_CHAIN_END_UNITID_BASE hex default 0x20 -config SERIAL_CPU_INIT - bool - default n - config IRQ_SLOT_COUNT int default 11 diff --git a/src/mainboard/msi/ms9652_fam10/Kconfig b/src/mainboard/msi/ms9652_fam10/Kconfig index 7439646..a1f69c8 100644 --- a/src/mainboard/msi/ms9652_fam10/Kconfig +++ b/src/mainboard/msi/ms9652_fam10/Kconfig @@ -141,10 +141,6 @@ config VAR_MTRR_HOLE bool default n -config SERIAL_CPU_INIT - bool - default y - config APIC_ID_OFFSET hex default 0x00 diff --git a/src/mainboard/nvidia/l1_2pvv/Kconfig b/src/mainboard/nvidia/l1_2pvv/Kconfig index 6ca0816..3c7f509 100644 --- a/src/mainboard/nvidia/l1_2pvv/Kconfig +++ b/src/mainboard/nvidia/l1_2pvv/Kconfig @@ -79,10 +79,6 @@ config HT_CHAIN_END_UNITID_BASE hex default 0x20 -config SERIAL_CPU_INIT - bool - default n - config IRQ_SLOT_COUNT int default 11 diff --git a/src/mainboard/supermicro/h8dmr_fam10/Kconfig b/src/mainboard/supermicro/h8dmr_fam10/Kconfig index 7c7b89e..9c3cef4 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/Kconfig +++ b/src/mainboard/supermicro/h8dmr_fam10/Kconfig @@ -94,8 +94,4 @@ config AMD_UCODE_PATCH_FILE string default "mc_patch_0100009f.h" -config SERIAL_CPU_INIT - bool - default n - endif # BOARD_SUPERMICRO_H8DMR_FAM10 diff --git a/src/mainboard/supermicro/h8qgi/Kconfig b/src/mainboard/supermicro/h8qgi/Kconfig index 4ab9a6b..b8edf19 100644 --- a/src/mainboard/supermicro/h8qgi/Kconfig +++ b/src/mainboard/supermicro/h8qgi/Kconfig @@ -38,7 +38,6 @@ config BOARD_SPECIFIC_OPTIONS select HAVE_PIRQ_TABLE select HAVE_MP_TABLE select HAVE_HARD_RESET - select SERIAL_CPU_INIT select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_2048 #select MMCONF_SUPPORT_DEFAULT #TODO enable it to resolve Multicore IO conflict diff --git a/src/mainboard/supermicro/h8qme_fam10/Kconfig b/src/mainboard/supermicro/h8qme_fam10/Kconfig index 8476599..a04139e 100644 --- a/src/mainboard/supermicro/h8qme_fam10/Kconfig +++ b/src/mainboard/supermicro/h8qme_fam10/Kconfig @@ -93,10 +93,6 @@ config AMD_UCODE_PATCH_FILE string default "mc_patch_0100009f.h" -config SERIAL_CPU_INIT - bool - default y - config STACK_SIZE hex default 0x10000 diff --git a/src/mainboard/supermicro/h8scm_fam10/Kconfig b/src/mainboard/supermicro/h8scm_fam10/Kconfig index 844763e..a3ee500 100644 --- a/src/mainboard/supermicro/h8scm_fam10/Kconfig +++ b/src/mainboard/supermicro/h8scm_fam10/Kconfig @@ -18,7 +18,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select GENERATE_MP_TABLE select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT select AMDMCT select GENERATE_ACPI_TABLES select BOARD_ROMSIZE_KB_2048 diff --git a/src/mainboard/tyan/s2891/Kconfig b/src/mainboard/tyan/s2891/Kconfig index 395f734..06d00b5 100644 --- a/src/mainboard/tyan/s2891/Kconfig +++ b/src/mainboard/tyan/s2891/Kconfig @@ -13,7 +13,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_OPTION_TABLE select HAVE_PIRQ_TABLE select HAVE_MP_TABLE - select SERIAL_CPU_INIT select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_512 select SB_HT_CHAIN_UNITID_OFFSET_ONLY diff --git a/src/mainboard/tyan/s2892/Kconfig b/src/mainboard/tyan/s2892/Kconfig index 9c6e7ec..61a6975 100644 --- a/src/mainboard/tyan/s2892/Kconfig +++ b/src/mainboard/tyan/s2892/Kconfig @@ -13,7 +13,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_OPTION_TABLE select HAVE_PIRQ_TABLE select HAVE_MP_TABLE - select SERIAL_CPU_INIT select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_1024 select QRANK_DIMM_SUPPORT diff --git a/src/mainboard/tyan/s2895/Kconfig b/src/mainboard/tyan/s2895/Kconfig index 05b6806..d90d4d8 100644 --- a/src/mainboard/tyan/s2895/Kconfig +++ b/src/mainboard/tyan/s2895/Kconfig @@ -13,7 +13,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_OPTION_TABLE select HAVE_PIRQ_TABLE select HAVE_MP_TABLE - select SERIAL_CPU_INIT select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_1024 select QRANK_DIMM_SUPPORT diff --git a/src/mainboard/tyan/s2912/Kconfig b/src/mainboard/tyan/s2912/Kconfig index 192b4ff..51b6b7f 100644 --- a/src/mainboard/tyan/s2912/Kconfig +++ b/src/mainboard/tyan/s2912/Kconfig @@ -74,10 +74,6 @@ config HT_CHAIN_END_UNITID_BASE hex default 0x20 -config SERIAL_CPU_INIT - bool - default n - config IRQ_SLOT_COUNT int default 11 diff --git a/src/mainboard/tyan/s2912_fam10/Kconfig b/src/mainboard/tyan/s2912_fam10/Kconfig index 910181d..d09a544 100644 --- a/src/mainboard/tyan/s2912_fam10/Kconfig +++ b/src/mainboard/tyan/s2912_fam10/Kconfig @@ -74,10 +74,6 @@ config HT_CHAIN_END_UNITID_BASE hex default 0x20 -config SERIAL_CPU_INIT - bool - default n - config IRQ_SLOT_COUNT int default 11

1 0

Patch set updated for coreboot: 84f46c2 APIC: Add wait_apic() helper function
by Sven Schnelle June 27, 2012

June 27, 2012

Sven Schnelle (svens(a)stackframe.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1141 -gerrit commit 84f46c28d640c2d4e2a14dc67660c09784cd2496 Author: Sven Schnelle <svens(a)stackframe.org> Date: Tue Jun 26 11:29:48 2012 +0200 APIC: Add wait_apic() helper function Instead of duplicating the code for waiting on the apic, use a single function. Change-Id: Iaea5b499787c1393a43e93d4ec37237bdbcfca44 Signed-off-by: Sven Schnelle <svens(a)stackframe.org> --- src/cpu/x86/lapic/lapic_cpu_init.c | 49 +++++++++++++---------------------- 1 files changed, 18 insertions(+), 31 deletions(-) diff --git a/src/cpu/x86/lapic/lapic_cpu_init.c b/src/cpu/x86/lapic/lapic_cpu_init.c index 60cacd5..363dd29 100644 --- a/src/cpu/x86/lapic/lapic_cpu_init.c +++ b/src/cpu/x86/lapic/lapic_cpu_init.c @@ -68,10 +68,22 @@ static void copy_secondary_start_to_1m_below(void) static struct bus *current_cpu_bus; +static int wait_apic(int timeout) +{ + int send_status; + + do { + printk(BIOS_SPEW, "+"); + udelay(100); + send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; + } while (send_status && --timeout); + + return send_status; +} + static int lapic_start_cpus(struct bus *cpu_bus) { - int timeout; - unsigned long send_status, accept_status, start_eip; + unsigned long accept_status, start_eip; int maxlvt; /* @@ -88,13 +100,7 @@ static int lapic_start_cpus(struct bus *cpu_bus) | LAPIC_DM_INIT | LAPIC_DEST_ALLBUT); printk(BIOS_DEBUG, "Waiting for send to finish...\n"); - timeout = 0; - do { - printk(BIOS_SPEW, "+"); - udelay(100); - send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; - } while (send_status && (timeout++ < 1000)); - if (timeout >= 1000) { + if (wait_apic(1000)) { printk(BIOS_DEBUG, "First apic write timed out. Disabling\n"); // too bad. printk(BIOS_DEBUG, "ESR is 0x%lx\n", lapic_read(LAPIC_ESR)); @@ -135,13 +141,8 @@ static int lapic_start_cpus(struct bus *cpu_bus) printk(BIOS_DEBUG, "Startup point 1.\n"); printk(BIOS_DEBUG, "Waiting for send to finish...\n"); - timeout = 0; - do { - printk(BIOS_DEBUG, "+"); - udelay(100); - send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; - } while (send_status && (timeout++ < 1000)); - + if (wait_apic(1000)) + return 1; /* * Give the other CPU some time to accept the IPI. */ @@ -156,12 +157,8 @@ static int lapic_start_cpus(struct bus *cpu_bus) accept_status = (lapic_read(LAPIC_ESR) & 0xEF); printk(BIOS_DEBUG, "After Startup.\n"); - if (send_status) - printk(BIOS_WARNING, "APIC never delivered???\n"); if (accept_status) printk(BIOS_WARNING, "APIC delivery error (%lx).\n", accept_status); - if (send_status || accept_status) - return 0; return 1; } @@ -174,24 +171,14 @@ extern unsigned char _estack[]; static void stop_all_ap_cpus(void) { - unsigned long send_status; - int timeout; /* send an LAPIC INIT to all but myself */ lapic_write_around(LAPIC_ICR2, 0); lapic_write_around(LAPIC_ICR, LAPIC_INT_ASSERT | LAPIC_DM_INIT | LAPIC_DEST_ALLBUT); /* wait for the ipi send to finish */ printk(BIOS_SPEW, "Waiting for send to finish...\n"); - timeout = 0; - do { - printk(BIOS_SPEW, "+"); - udelay(100); - send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; - } while (send_status && (timeout++ < 1000)); - if (timeout >= 1000) { + if (wait_apic(1000)) printk(BIOS_ERR, "timed out\n"); - } - mdelay(10); } #ifdef __SSE3__

1 0

Patch set updated for coreboot: 20251a6 Use broadcast SIPI to startup siblings
by Sven Schnelle June 27, 2012

June 27, 2012

Sven Schnelle (svens(a)stackframe.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1139 -gerrit commit 20251a657ddab1a696fe4a7c3967b74cda45fb6e Author: Sven Schnelle <svens(a)stackframe.org> Date: Sun Jun 17 10:32:55 2012 +0200 Use broadcast SIPI to startup siblings Change-Id: Ic48a1ebab6a7c52aa76765f497268af09fa38c25 Signed-off-by: Sven Schnelle <svens(a)stackframe.org> --- src/arch/x86/Kconfig | 4 - src/arch/x86/include/arch/cpu.h | 24 -- src/arch/x86/lib/cpu.c | 36 ++- src/cpu/amd/model_10xxx/init_cpus.c | 3 +- src/cpu/amd/model_fxx/init_cpus.c | 3 +- src/cpu/intel/hyperthreading/Makefile.inc | 1 - src/cpu/intel/hyperthreading/intel_sibling.c | 73 ----- src/cpu/intel/model_1067x/model_1067x_init.c | 4 - src/cpu/intel/model_106cx/Kconfig | 1 - src/cpu/intel/model_106cx/model_106cx_init.c | 4 - src/cpu/intel/model_206ax/Kconfig | 1 - src/cpu/intel/model_206ax/acpi.c | 9 +- src/cpu/intel/model_206ax/model_206ax_init.c | 55 ---- src/cpu/intel/model_6ex/Kconfig | 1 - src/cpu/intel/model_6ex/model_6ex_init.c | 3 - src/cpu/intel/model_6fx/Kconfig | 1 - src/cpu/intel/model_6fx/model_6fx_init.c | 3 - src/cpu/intel/model_f2x/model_f2x_init.c | 4 - src/cpu/intel/model_f3x/model_f3x_init.c | 4 - src/cpu/intel/model_f4x/model_f4x_init.c | 4 - src/cpu/intel/socket_LGA771/Kconfig | 1 - src/cpu/x86/lapic/lapic_cpu_init.c | 367 +++++--------------------- src/cpu/x86/lapic/secondary.S | 19 +- src/cpu/x86/pae/pgtbl.c | 12 + src/drivers/i2c/w83795/w83795.c | 5 +- src/include/cpu/cpu.h | 4 +- src/include/cpu/x86/lapic.h | 15 - src/include/device/path.h | 1 + 28 files changed, 134 insertions(+), 528 deletions(-) diff --git a/src/arch/x86/Kconfig b/src/arch/x86/Kconfig index 6d56ec6..4dfbe70 100644 --- a/src/arch/x86/Kconfig +++ b/src/arch/x86/Kconfig @@ -3,10 +3,6 @@ menu "Architecture (x86)" # This is an SMP option. It relates to starting up APs. # It is usually set in mainboard/*/Kconfig. # TODO: Improve description. -config AP_IN_SIPI_WAIT - bool - default n - depends on ARCH_X86 # Aligns 16bit entry code in bootblock so that hyper-threading CPUs # can boot AP CPUs to enable their shared caches. diff --git a/src/arch/x86/include/arch/cpu.h b/src/arch/x86/include/arch/cpu.h index 0dc92fb..0fe5ea5 100644 --- a/src/arch/x86/include/arch/cpu.h +++ b/src/arch/x86/include/arch/cpu.h @@ -158,30 +158,6 @@ struct cpu_driver { struct device; struct cpu_driver *find_cpu_driver(struct device *cpu); -struct cpu_info { - device_t cpu; - unsigned long index; -}; - -static inline struct cpu_info *cpu_info(void) -{ - struct cpu_info *ci; - __asm__("andl %%esp,%0; " - "orl %2, %0 " - :"=r" (ci) - : "0" (~(CONFIG_STACK_SIZE - 1)), - "r" (CONFIG_STACK_SIZE - sizeof(struct cpu_info)) - ); - return ci; -} - -static inline unsigned long cpu_index(void) -{ - struct cpu_info *ci; - ci = cpu_info(); - return ci->index; -} - struct cpuinfo_x86 { uint8_t x86; /* CPU family */ uint8_t x86_vendor; /* CPU vendor */ diff --git a/src/arch/x86/lib/cpu.c b/src/arch/x86/lib/cpu.c index 98ede06..520b2c6 100644 --- a/src/arch/x86/lib/cpu.c +++ b/src/arch/x86/lib/cpu.c @@ -9,6 +9,7 @@ #include <device/path.h> #include <device/device.h> #include <smp/spinlock.h> +#include <cpu/x86/lapic.h> /* Standard macro to see if a specific flag is changeable */ static inline int flag_is_changeable_p(uint32_t flag) @@ -234,7 +235,11 @@ static void set_cpu_ops(struct device *cpu) cpu->ops = driver ? driver->ops : NULL; } -void cpu_initialize(void) +#if CONFIG_SMP +static spinlock_t start_cpu_lock = SPIN_LOCK_UNLOCKED; +#endif + +void cpu_initialize(struct bus *cpu_bus) { /* Because we busy wait at the printk spinlock. * It is important to keep the number of printed messages @@ -242,17 +247,23 @@ void cpu_initialize(void) * disabled. */ struct device *cpu; - struct cpu_info *info; struct cpuinfo_x86 c; - - info = cpu_info(); - - printk(BIOS_INFO, "Initializing CPU #%ld\n", info->index); - - cpu = info->cpu; - if (!cpu) { - die("CPU: missing cpu device structure"); - } + struct device_path cpu_path; + static int cpu_index; + unsigned char id = lapicid(); + + cpu_path.type = DEVICE_PATH_APIC; + cpu_path.apic.apic_id = id; + +#if CONFIG_SMP + spin_lock(&start_cpu_lock); +#endif + cpu_path.apic.index = cpu_index++; + cpu = alloc_find_dev(cpu_bus, &cpu_path); +#if CONFIG_SMP + spin_unlock(&start_cpu_lock); +#endif + printk(BIOS_DEBUG, "Initializing CPU #%d\n", id); /* Find what type of cpu we are dealing with */ identify_cpu(cpu); @@ -276,7 +287,6 @@ void cpu_initialize(void) printk(BIOS_DEBUG, "Using generic cpu ops (good)\n"); } - /* Initialize the cpu */ if (cpu->ops && cpu->ops->init) { cpu->enabled = 1; @@ -284,7 +294,7 @@ void cpu_initialize(void) cpu->ops->init(cpu); } - printk(BIOS_INFO, "CPU #%ld initialized\n", info->index); + printk(BIOS_INFO, "CPU #%d initialized\n", id); return; } diff --git a/src/cpu/amd/model_10xxx/init_cpus.c b/src/cpu/amd/model_10xxx/init_cpus.c index e2a4a64..0ffce53 100644 --- a/src/cpu/amd/model_10xxx/init_cpus.c +++ b/src/cpu/amd/model_10xxx/init_cpus.c @@ -241,7 +241,8 @@ static void STOP_CAR_AND_CPU(void) disable_cache_as_ram(); // inline /* stop all cores except node0/core0 the bsp .... */ - stop_this_cpu(); + for(;;) + hlt(); } #if CONFIG_RAMINIT_SYSINFO diff --git a/src/cpu/amd/model_fxx/init_cpus.c b/src/cpu/amd/model_fxx/init_cpus.c index 7121642..d5e5800 100644 --- a/src/cpu/amd/model_fxx/init_cpus.c +++ b/src/cpu/amd/model_fxx/init_cpus.c @@ -190,7 +190,8 @@ static void STOP_CAR_AND_CPU(void) { disable_cache_as_ram(); // inline /* stop all cores except node0/core0 the bsp .... */ - stop_this_cpu(); + for(;;) + hlt(); } #if CONFIG_RAMINIT_SYSINFO diff --git a/src/cpu/intel/hyperthreading/Makefile.inc b/src/cpu/intel/hyperthreading/Makefile.inc deleted file mode 100644 index 8adbad9..0000000 --- a/src/cpu/intel/hyperthreading/Makefile.inc +++ /dev/null @@ -1 +0,0 @@ -ramstage-y += intel_sibling.c diff --git a/src/cpu/intel/hyperthreading/intel_sibling.c b/src/cpu/intel/hyperthreading/intel_sibling.c deleted file mode 100644 index 2d2e105..0000000 --- a/src/cpu/intel/hyperthreading/intel_sibling.c +++ /dev/null @@ -1,73 +0,0 @@ -#include <console/console.h> -#include <cpu/cpu.h> -#include <cpu/x86/lapic.h> -#include <cpu/intel/hyperthreading.h> -#include <device/device.h> -#include <pc80/mc146818rtc.h> -#include <smp/spinlock.h> -#include <assert.h> - -#if !CONFIG_SERIAL_CPU_INIT -#error Intel hyper-threading requires serialized cpu init -#endif - -static int first_time = 1; -static int disable_siblings = !CONFIG_LOGICAL_CPUS; - -void intel_sibling_init(device_t cpu) -{ - unsigned i, siblings; - struct cpuid_result result; - - /* On the bootstrap processor see if I want sibling cpus enabled */ - if (first_time) { - first_time = 0; - get_option(&disable_siblings, "hyper_threading"); - } - result = cpuid(1); - /* Is hyperthreading supported */ - if (!(result.edx & (1 << 28))) { - return; - } - /* See how many sibling cpus we have */ - siblings = (result.ebx >> 16) & 0xff; - if (siblings < 1) { - siblings = 1; - } - - printk(BIOS_DEBUG, "CPU: %u %d siblings\n", - cpu->path.apic.apic_id, - siblings); - - /* See if I am a sibling cpu */ - if (cpu->path.apic.apic_id & (siblings -1)) { - if (disable_siblings) { - cpu->enabled = 0; - } - return; - } - - /* I am the primary cpu start up my siblings */ - for(i = 1; i < siblings; i++) { - struct device_path cpu_path; - device_t new; - /* Build the cpu device path */ - cpu_path.type = DEVICE_PATH_APIC; - cpu_path.apic.apic_id = cpu->path.apic.apic_id + i; - - - /* Allocate new cpu device structure iff sibling CPU - * was not in static device tree. - */ - new = alloc_find_dev(cpu->bus, &cpu_path); - - if (!new) { - continue; - } - - printk(BIOS_DEBUG, "CPU: %u has sibling %u\n", - cpu->path.apic.apic_id, - new->path.apic.apic_id); - } -} - diff --git a/src/cpu/intel/model_1067x/model_1067x_init.c b/src/cpu/intel/model_1067x/model_1067x_init.c index c6d716d9..ddd1381 100644 --- a/src/cpu/intel/model_1067x/model_1067x_init.c +++ b/src/cpu/intel/model_1067x/model_1067x_init.c @@ -29,7 +29,6 @@ #include <cpu/x86/lapic.h> #include <cpu/intel/microcode.h> #include <cpu/intel/speedstep.h> -#include <cpu/intel/hyperthreading.h> #include <cpu/x86/cache.h> #include <cpu/x86/name.h> @@ -221,9 +220,6 @@ static void model_1067x_init(device_t cpu) /* PIC thermal sensor control */ configure_pic_thermal_sensors(); - - /* Start up my cpu siblings */ - intel_sibling_init(cpu); } static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/model_106cx/Kconfig b/src/cpu/intel/model_106cx/Kconfig index 09449cb..fe44024 100644 --- a/src/cpu/intel/model_106cx/Kconfig +++ b/src/cpu/intel/model_106cx/Kconfig @@ -3,4 +3,3 @@ config CPU_INTEL_MODEL_106CX select SMP select SSE2 select UDELAY_LAPIC - select AP_IN_SIPI_WAIT diff --git a/src/cpu/intel/model_106cx/model_106cx_init.c b/src/cpu/intel/model_106cx/model_106cx_init.c index 4bf2924..8d2ef3d 100644 --- a/src/cpu/intel/model_106cx/model_106cx_init.c +++ b/src/cpu/intel/model_106cx/model_106cx_init.c @@ -27,7 +27,6 @@ #include <cpu/x86/lapic.h> #include <cpu/intel/microcode.h> #include <cpu/intel/speedstep.h> -#include <cpu/intel/hyperthreading.h> #include <cpu/x86/cache.h> #include <cpu/x86/name.h> #include <usbdebug.h> @@ -178,9 +177,6 @@ static void model_106cx_init(device_t cpu) configure_misc(); /* TODO: PIC thermal sensor control */ - - /* Start up my cpu siblings */ - intel_sibling_init(cpu); } static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/model_206ax/Kconfig b/src/cpu/intel/model_206ax/Kconfig index d2d4c73..e3e4360 100644 --- a/src/cpu/intel/model_206ax/Kconfig +++ b/src/cpu/intel/model_206ax/Kconfig @@ -12,7 +12,6 @@ config CPU_SPECIFIC_OPTIONS select SSE2 select UDELAY_LAPIC select SMM_TSEG - #select AP_IN_SIPI_WAIT config BOOTBLOCK_CPU_INIT string diff --git a/src/cpu/intel/model_206ax/acpi.c b/src/cpu/intel/model_206ax/acpi.c index 6153174..dea23e7 100644 --- a/src/cpu/intel/model_206ax/acpi.c +++ b/src/cpu/intel/model_206ax/acpi.c @@ -26,6 +26,7 @@ #include <arch/acpigen.h> #include <arch/cpu.h> #include <cpu/x86/msr.h> +#include <cpu/x86/lapic.h> #include <cpu/intel/acpi.h> #include <cpu/intel/speedstep.h> #include <cpu/intel/turbo.h> @@ -88,8 +89,8 @@ static int generate_cstate_entries(acpi_cstate_t *cstates, static int generate_C_state_entries(void) { - struct cpu_info *info; struct cpu_driver *cpu; + struct device *cpu_dev; int len, lenif; device_t lapic; struct cpu_intel_model_206ax_config *conf = NULL; @@ -103,10 +104,10 @@ static int generate_C_state_entries(void) return 0; /* Find CPU map of supported C-states */ - info = cpu_info(); - if (!info) + cpu_dev = dev_find_lapic(lapicid()); + if (!cpu_dev) return 0; - cpu = find_cpu_driver(info->cpu); + cpu = find_cpu_driver(cpu_dev); if (!cpu || !cpu->cstates) return 0; diff --git a/src/cpu/intel/model_206ax/model_206ax_init.c b/src/cpu/intel/model_206ax/model_206ax_init.c index 874ce4d..d60c237 100644 --- a/src/cpu/intel/model_206ax/model_206ax_init.c +++ b/src/cpu/intel/model_206ax/model_206ax_init.c @@ -414,58 +414,6 @@ static void configure_mca(void) static unsigned ehci_debug_addr; #endif -/* - * Initialize any extra cores/threads in this package. - */ -static void intel_cores_init(device_t cpu) -{ - struct cpuid_result result; - unsigned cores, threads, i; - - result = cpuid_ext(0xb, 0); /* Threads per core */ - threads = result.ebx & 0xff; - - result = cpuid_ext(0xb, 1); /* Cores per package */ - cores = result.ebx & 0xff; - - /* Only initialize extra cores from BSP */ - if (cpu->path.apic.apic_id) - return; - - printk(BIOS_DEBUG, "CPU: %u has %u cores %u threads\n", - cpu->path.apic.apic_id, cores, threads); - - for (i = 1; i < cores; ++i) { - struct device_path cpu_path; - device_t new; - - /* Build the cpu device path */ - cpu_path.type = DEVICE_PATH_APIC; - cpu_path.apic.apic_id = - cpu->path.apic.apic_id + i; - - /* Update APIC ID if no hyperthreading */ - if (threads == 1) - cpu_path.apic.apic_id <<= 1; - - /* Allocate the new cpu device structure */ - new = alloc_dev(cpu->bus, &cpu_path); - if (!new) - continue; - - printk(BIOS_DEBUG, "CPU: %u has core %u\n", - cpu->path.apic.apic_id, - new->path.apic.apic_id); - - /* Start the new cpu */ - if (!start_cpu(new)) { - /* Record the error in cpu? */ - printk(BIOS_ERR, "CPU %u would not start!\n", - new->path.apic.apic_id); - } - } -} - static void model_206ax_init(device_t cpu) { char processor_name[49]; @@ -528,9 +476,6 @@ static void model_206ax_init(device_t cpu) /* Enable Turbo */ enable_turbo(); - - /* Start up extra cores */ - intel_cores_init(cpu); } static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/model_6ex/Kconfig b/src/cpu/intel/model_6ex/Kconfig index 31d24bd..c3faa39 100644 --- a/src/cpu/intel/model_6ex/Kconfig +++ b/src/cpu/intel/model_6ex/Kconfig @@ -3,4 +3,3 @@ config CPU_INTEL_MODEL_6EX select SMP select SSE2 select UDELAY_LAPIC - select AP_IN_SIPI_WAIT diff --git a/src/cpu/intel/model_6ex/model_6ex_init.c b/src/cpu/intel/model_6ex/model_6ex_init.c index 1c8c72b..a0afd2e 100644 --- a/src/cpu/intel/model_6ex/model_6ex_init.c +++ b/src/cpu/intel/model_6ex/model_6ex_init.c @@ -205,9 +205,6 @@ static void model_6ex_init(device_t cpu) /* PIC thermal sensor control */ configure_pic_thermal_sensors(); - - /* Start up my cpu siblings */ - intel_sibling_init(cpu); } static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/model_6fx/Kconfig b/src/cpu/intel/model_6fx/Kconfig index 851685c..065cdd9 100644 --- a/src/cpu/intel/model_6fx/Kconfig +++ b/src/cpu/intel/model_6fx/Kconfig @@ -3,4 +3,3 @@ config CPU_INTEL_MODEL_6FX select SMP select SSE2 select UDELAY_LAPIC - select AP_IN_SIPI_WAIT diff --git a/src/cpu/intel/model_6fx/model_6fx_init.c b/src/cpu/intel/model_6fx/model_6fx_init.c index 106719e..c5d7a6b 100644 --- a/src/cpu/intel/model_6fx/model_6fx_init.c +++ b/src/cpu/intel/model_6fx/model_6fx_init.c @@ -243,9 +243,6 @@ static void model_6fx_init(device_t cpu) /* PIC thermal sensor control */ configure_pic_thermal_sensors(); - - /* Start up my cpu siblings */ - intel_sibling_init(cpu); } static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/model_f2x/model_f2x_init.c b/src/cpu/intel/model_f2x/model_f2x_init.c index ec78672..51b72a3 100644 --- a/src/cpu/intel/model_f2x/model_f2x_init.c +++ b/src/cpu/intel/model_f2x/model_f2x_init.c @@ -7,7 +7,6 @@ #include <cpu/x86/msr.h> #include <cpu/x86/lapic.h> #include <cpu/intel/microcode.h> -#include <cpu/intel/hyperthreading.h> #include <cpu/x86/cache.h> /* 512KB cache */ @@ -56,9 +55,6 @@ static void model_f2x_init(device_t cpu) /* Enable the local cpu apics */ setup_lapic(); - - /* Start up my cpu siblings */ - intel_sibling_init(cpu); }; static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/model_f3x/model_f3x_init.c b/src/cpu/intel/model_f3x/model_f3x_init.c index 580c98b..ca346da 100644 --- a/src/cpu/intel/model_f3x/model_f3x_init.c +++ b/src/cpu/intel/model_f3x/model_f3x_init.c @@ -7,7 +7,6 @@ #include <cpu/x86/msr.h> #include <cpu/x86/lapic.h> #include <cpu/intel/microcode.h> -#include <cpu/intel/hyperthreading.h> #include <cpu/x86/cache.h> static uint32_t microcode_updates[] = { @@ -39,9 +38,6 @@ static void model_f3x_init(device_t cpu) /* Enable the local cpu apics */ setup_lapic(); - - /* Start up my cpu siblings */ - intel_sibling_init(cpu); }; static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/model_f4x/model_f4x_init.c b/src/cpu/intel/model_f4x/model_f4x_init.c index 54edf2e..c857cef 100644 --- a/src/cpu/intel/model_f4x/model_f4x_init.c +++ b/src/cpu/intel/model_f4x/model_f4x_init.c @@ -7,7 +7,6 @@ #include <cpu/x86/msr.h> #include <cpu/x86/lapic.h> #include <cpu/intel/microcode.h> -#include <cpu/intel/hyperthreading.h> #include <cpu/x86/cache.h> static uint32_t microcode_updates[] = { @@ -47,9 +46,6 @@ static void model_f4x_init(device_t cpu) /* Enable the local cpu apics */ setup_lapic(); - - /* Start up my cpu siblings */ - intel_sibling_init(cpu); }; static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/socket_LGA771/Kconfig b/src/cpu/intel/socket_LGA771/Kconfig index 62bd17b..f549210 100644 --- a/src/cpu/intel/socket_LGA771/Kconfig +++ b/src/cpu/intel/socket_LGA771/Kconfig @@ -3,4 +3,3 @@ config CPU_INTEL_SOCKET_LGA771 select CPU_INTEL_MODEL_6FX select SSE2 select MMX - select AP_IN_SIPI_WAIT diff --git a/src/cpu/x86/lapic/lapic_cpu_init.c b/src/cpu/x86/lapic/lapic_cpu_init.c index e491d46..60cacd5 100644 --- a/src/cpu/x86/lapic/lapic_cpu_init.c +++ b/src/cpu/x86/lapic/lapic_cpu_init.c @@ -66,31 +66,28 @@ static void copy_secondary_start_to_1m_below(void) printk(BIOS_DEBUG, "start_eip=0x%08lx, offset=0x%08lx, code_size=0x%08lx\n", start_eip, ((unsigned long)_secondary_start - start_eip), code_size); } -static int lapic_start_cpu(unsigned long apicid) +static struct bus *current_cpu_bus; + +static int lapic_start_cpus(struct bus *cpu_bus) { int timeout; unsigned long send_status, accept_status, start_eip; - int j, num_starts, maxlvt; + int maxlvt; /* * Starting actual IPI sequence... */ - printk(BIOS_SPEW, "Asserting INIT.\n"); - - /* - * Turn INIT on target chip - */ - lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(apicid)); + current_cpu_bus = cpu_bus; - /* - * Send IPI - */ + printk(BIOS_SPEW, "Asserting INIT.\n"); - lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_INT_ASSERT - | LAPIC_DM_INIT); + /* Send INIT SIPI to target chip */ + lapic_write_around(LAPIC_ICR2, 0); + lapic_write_around(LAPIC_ICR, LAPIC_INT_ASSERT + | LAPIC_DM_INIT | LAPIC_DEST_ALLBUT); - printk(BIOS_SPEW, "Waiting for send to finish...\n"); + printk(BIOS_DEBUG, "Waiting for send to finish...\n"); timeout = 0; do { printk(BIOS_SPEW, "+"); @@ -98,108 +95,67 @@ static int lapic_start_cpu(unsigned long apicid) send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; } while (send_status && (timeout++ < 1000)); if (timeout >= 1000) { - printk(BIOS_ERR, "CPU %ld: First apic write timed out. Disabling\n", - apicid); + printk(BIOS_DEBUG, "First apic write timed out. Disabling\n"); // too bad. - printk(BIOS_ERR, "ESR is 0x%lx\n", lapic_read(LAPIC_ESR)); + printk(BIOS_DEBUG, "ESR is 0x%lx\n", lapic_read(LAPIC_ESR)); if (lapic_read(LAPIC_ESR)) { - printk(BIOS_ERR, "Try to reset ESR\n"); + printk(BIOS_DEBUG, "Try to reset ESR\n"); lapic_write_around(LAPIC_ESR, 0); - printk(BIOS_ERR, "ESR is 0x%lx\n", lapic_read(LAPIC_ESR)); + printk(BIOS_DEBUG, "ESR is 0x%lx\n", lapic_read(LAPIC_ESR)); } return 0; } -#if !CONFIG_CPU_AMD_MODEL_10XXX && !CONFIG_CPU_INTEL_MODEL_206AX - mdelay(10); -#endif + start_eip = get_valid_start_eip((unsigned long)_secondary_start); + + maxlvt = 4; + + printk(BIOS_SPEW, "Sending STARTUP.\n"); + lapic_read_around(LAPIC_SPIV); + lapic_write(LAPIC_ESR, 0); + lapic_read(LAPIC_ESR); + printk(BIOS_SPEW, "After apic_write.\n"); - printk(BIOS_SPEW, "Deasserting INIT.\n"); + /* + * STARTUP IPI + */ /* Target chip */ - lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(apicid)); + lapic_write_around(LAPIC_ICR2, 0); - /* Send IPI */ - lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_DM_INIT); + /* Boot on the stack */ + /* Kick the second */ + lapic_write_around(LAPIC_ICR, LAPIC_INT_ASSERT | LAPIC_DM_STARTUP | LAPIC_DEST_ALLBUT + | (start_eip >> 12)); - printk(BIOS_SPEW, "Waiting for send to finish...\n"); + /* + * Give the other CPU some time to accept the IPI. + */ + udelay(300); + + printk(BIOS_DEBUG, "Startup point 1.\n"); + + printk(BIOS_DEBUG, "Waiting for send to finish...\n"); timeout = 0; do { - printk(BIOS_SPEW, "+"); + printk(BIOS_DEBUG, "+"); udelay(100); send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; } while (send_status && (timeout++ < 1000)); - if (timeout >= 1000) { - printk(BIOS_ERR, "CPU %ld: Second apic write timed out. Disabling\n", - apicid); - // too bad. - return 0; - } - - start_eip = get_valid_start_eip((unsigned long)_secondary_start); - -#if !CONFIG_CPU_AMD_MODEL_10XXX - num_starts = 2; -#else - num_starts = 1; -#endif /* - * Run STARTUP IPI loop. + * Give the other CPU some time to accept the IPI. */ - printk(BIOS_SPEW, "#startup loops: %d.\n", num_starts); - - maxlvt = 4; - - for (j = 1; j <= num_starts; j++) { - printk(BIOS_SPEW, "Sending STARTUP #%d to %lu.\n", j, apicid); + udelay(200); + /* + * Due to the Pentium erratum 3AP. + */ + if (maxlvt > 3) { lapic_read_around(LAPIC_SPIV); lapic_write(LAPIC_ESR, 0); - lapic_read(LAPIC_ESR); - printk(BIOS_SPEW, "After apic_write.\n"); - - /* - * STARTUP IPI - */ - - /* Target chip */ - lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(apicid)); - - /* Boot on the stack */ - /* Kick the second */ - lapic_write_around(LAPIC_ICR, LAPIC_DM_STARTUP - | (start_eip >> 12)); - - /* - * Give the other CPU some time to accept the IPI. - */ - udelay(300); - - printk(BIOS_SPEW, "Startup point 1.\n"); - - printk(BIOS_SPEW, "Waiting for send to finish...\n"); - timeout = 0; - do { - printk(BIOS_SPEW, "+"); - udelay(100); - send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; - } while (send_status && (timeout++ < 1000)); - - /* - * Give the other CPU some time to accept the IPI. - */ - udelay(200); - /* - * Due to the Pentium erratum 3AP. - */ - if (maxlvt > 3) { - lapic_read_around(LAPIC_SPIV); - lapic_write(LAPIC_ESR, 0); - } - accept_status = (lapic_read(LAPIC_ESR) & 0xEF); - if (send_status || accept_status) - break; } - printk(BIOS_SPEW, "After Startup.\n"); + accept_status = (lapic_read(LAPIC_ESR) & 0xEF); + + printk(BIOS_DEBUG, "After Startup.\n"); if (send_status) printk(BIOS_WARNING, "APIC never delivered???\n"); if (accept_status) @@ -209,156 +165,34 @@ static int lapic_start_cpu(unsigned long apicid) return 1; } + /* Number of cpus that are currently running in coreboot */ static atomic_t active_cpus = ATOMIC_INIT(1); -/* start_cpu_lock covers last_cpu_index and secondary_stack. - * Only starting one cpu at a time let's me remove the logic - * for select the stack from assembly language. - * - * In addition communicating by variables to the cpu I - * am starting allows me to veryify it has started before - * start_cpu returns. - */ - -static spinlock_t start_cpu_lock = SPIN_LOCK_UNLOCKED; -static unsigned last_cpu_index = 0; volatile unsigned long secondary_stack; +extern unsigned char _estack[]; -int start_cpu(device_t cpu) +static void stop_all_ap_cpus(void) { - extern unsigned char _estack[]; - struct cpu_info *info; - unsigned long stack_end; - unsigned long apicid; - unsigned long index; - unsigned long count; - int result; - - spin_lock(&start_cpu_lock); - - /* Get the cpu's apicid */ - apicid = cpu->path.apic.apic_id; - - /* Get an index for the new processor */ - index = ++last_cpu_index; - - /* Find end of the new processors stack */ - stack_end = ((unsigned long)_estack) - (CONFIG_STACK_SIZE*index) - sizeof(struct cpu_info); - - /* Record the index and which cpu structure we are using */ - info = (struct cpu_info *)stack_end; - info->index = index; - info->cpu = cpu; - - /* Advertise the new stack to start_cpu */ - secondary_stack = stack_end; - - /* Until the cpu starts up report the cpu is not enabled */ - cpu->enabled = 0; - cpu->initialized = 0; - - /* Start the cpu */ - result = lapic_start_cpu(apicid); - - if (result) { - result = 0; - /* Wait 1s or until the new cpu calls in */ - for(count = 0; count < 100000 ; count++) { - if (secondary_stack == 0) { - result = 1; - break; - } - udelay(10); - } - } - secondary_stack = 0; - spin_unlock(&start_cpu_lock); - return result; -} - -#if CONFIG_AP_IN_SIPI_WAIT - -/** - * Sending INIT IPI to self is equivalent of asserting #INIT with a bit of delay. - * An undefined number of instruction cycles will complete. All global locks - * must be released before INIT IPI and no printk is allowed after this. - * De-asserting INIT IPI is a no-op on later Intel CPUs. - * - * If you set DEBUG_HALT_SELF to 1, printk's after INIT IPI are enabled - * but running thread may halt without releasing the lock and effectively - * deadlock other CPUs. - */ -#define DEBUG_HALT_SELF 0 - -/** - * Normally this function is defined in lapic.h as an always inline function - * that just keeps the CPU in a hlt() loop. This does not work on all CPUs. - * I think all hyperthreading CPUs might need this version, but I could only - * verify this on the Intel Core Duo - */ -void stop_this_cpu(void) -{ - int timeout; unsigned long send_status; - unsigned long id; - - id = lapic_read(LAPIC_ID) >> 24; - - printk(BIOS_DEBUG, "CPU %ld going down...\n", id); - - /* send an LAPIC INIT to myself */ - lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(id)); - lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_INT_ASSERT | LAPIC_DM_INIT); + int timeout; + /* send an LAPIC INIT to all but myself */ + lapic_write_around(LAPIC_ICR2, 0); + lapic_write_around(LAPIC_ICR, LAPIC_INT_ASSERT | LAPIC_DM_INIT | LAPIC_DEST_ALLBUT); /* wait for the ipi send to finish */ -#if DEBUG_HALT_SELF printk(BIOS_SPEW, "Waiting for send to finish...\n"); -#endif timeout = 0; do { -#if DEBUG_HALT_SELF printk(BIOS_SPEW, "+"); -#endif udelay(100); send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; } while (send_status && (timeout++ < 1000)); if (timeout >= 1000) { -#if DEBUG_HALT_SELF printk(BIOS_ERR, "timed out\n"); -#endif } mdelay(10); - -#if DEBUG_HALT_SELF - printk(BIOS_SPEW, "Deasserting INIT.\n"); -#endif - /* Deassert the LAPIC INIT */ - lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(id)); - lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_DM_INIT); - -#if DEBUG_HALT_SELF - printk(BIOS_SPEW, "Waiting for send to finish...\n"); -#endif - timeout = 0; - do { -#if DEBUG_HALT_SELF - printk(BIOS_SPEW, "+"); -#endif - udelay(100); - send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; - } while (send_status && (timeout++ < 1000)); - if (timeout >= 1000) { -#if DEBUG_HALT_SELF - printk(BIOS_ERR, "timed out\n"); -#endif - } - - while(1) { - hlt(); - } } -#endif #ifdef __SSE3__ static __inline__ __attribute__((always_inline)) unsigned long readcr4(void) @@ -383,64 +217,19 @@ static __inline__ __attribute__((always_inline)) void writecr4(unsigned long Dat /* C entry point of secondary cpus */ void secondary_cpu_init(void) { - atomic_inc(&active_cpus); -#if CONFIG_SERIAL_CPU_INIT - spin_lock(&start_cpu_lock); -#endif - #ifdef __SSE3__ - /* - * Seems that CR4 was cleared when AP start via lapic_start_cpu() - * Turn on CR4.OSFXSR and CR4.OSXMMEXCPT when SSE options enabled - */ - u32 cr4_val; - cr4_val = readcr4(); - cr4_val |= (1 << 9 | 1 << 10); - writecr4(cr4_val); -#endif - cpu_initialize(); -#if CONFIG_SERIAL_CPU_INIT - spin_unlock(&start_cpu_lock); + /* + * Seems that CR4 was cleared when AP start via lapic_start_cpu() + * Turn on CR4.OSFXSR and CR4.OSXMMEXCPT when SSE options enabled + */ + u32 cr4_val; + cr4_val = readcr4(); + cr4_val |= (1 << 9 | 1 << 10); + writecr4(cr4_val); #endif - + atomic_inc(&active_cpus); + cpu_initialize(current_cpu_bus); atomic_dec(&active_cpus); - - stop_this_cpu(); -} - -static void start_other_cpus(struct bus *cpu_bus, device_t bsp_cpu) -{ - device_t cpu; - /* Loop through the cpus once getting them started */ - - for(cpu = cpu_bus->children; cpu ; cpu = cpu->sibling) { - if (cpu->path.type != DEVICE_PATH_APIC) { - continue; - } - #if !CONFIG_SERIAL_CPU_INIT - if(cpu==bsp_cpu) { - continue; - } - #endif - - if (!cpu->enabled) { - continue; - } - - if (cpu->initialized) { - continue; - } - - if (!start_cpu(cpu)) { - /* Record the error in cpu? */ - printk(BIOS_ERR, "CPU 0x%02x would not start!\n", - cpu->path.apic.apic_id); - } -#if CONFIG_SERIAL_CPU_INIT - udelay(10); -#endif - } - } static void wait_other_cpus_stop(struct bus *cpu_bus) @@ -473,6 +262,7 @@ static void wait_other_cpus_stop(struct bus *cpu_bus) cpu->path.apic.apic_id); } } + stop_all_ap_cpus(); printk(BIOS_DEBUG, "All AP CPUs stopped (%ld loops)\n", loopcount); } @@ -481,10 +271,6 @@ static void wait_other_cpus_stop(struct bus *cpu_bus) void initialize_cpus(struct bus *cpu_bus) { struct device_path cpu_path; - struct cpu_info *info; - - /* Find the info struct for this cpu */ - info = cpu_info(); #if NEED_LAPIC == 1 /* Ensure the local apic is enabled */ @@ -499,9 +285,6 @@ void initialize_cpus(struct bus *cpu_bus) cpu_path.cpu.id = 0; #endif - /* Find the device structure for the boot cpu */ - info->cpu = alloc_find_dev(cpu_bus, &cpu_path); - #if CONFIG_SMP copy_secondary_start_to_1m_below(); // why here? In case some day we can start core1 in amd_sibling_init #endif @@ -512,21 +295,11 @@ void initialize_cpus(struct bus *cpu_bus) cpus_ready_for_init(); -#if CONFIG_SMP - #if !CONFIG_SERIAL_CPU_INIT - /* start all aps at first, so we can init ECC all together */ - start_other_cpus(cpu_bus, info->cpu); - #endif -#endif - /* Initialize the bootstrap processor */ - cpu_initialize(); + cpu_initialize(cpu_bus); #if CONFIG_SMP - #if CONFIG_SERIAL_CPU_INIT - start_other_cpus(cpu_bus, info->cpu); - #endif - + lapic_start_cpus(cpu_bus); /* Now wait the rest of the cpus stop*/ wait_other_cpus_stop(cpu_bus); #endif diff --git a/src/cpu/x86/lapic/secondary.S b/src/cpu/x86/lapic/secondary.S index dc00b08..0ff68b6 100644 --- a/src/cpu/x86/lapic/secondary.S +++ b/src/cpu/x86/lapic/secondary.S @@ -2,7 +2,7 @@ #include <cpu/x86/lapic_def.h> .text - .globl _secondary_start, _secondary_start_end + .globl _secondary_start, _secondary_start_end, apcount .balign 4096 _secondary_start: .code16 @@ -38,10 +38,19 @@ _secondary_start: /* Load the Interrupt descriptor table */ lidt idtarg - /* Set the stack pointer, and flag that we are done */ - xorl %eax, %eax - movl secondary_stack, %esp - movl %eax, secondary_stack +apcount: + .long 0 + + /* increment our cpu index */ + movl $1, %eax + lock xadd %eax, apcount + incl %eax + + /* assign stack for this specific cpu */ + mov _stack, %esp + mov $CONFIG_STACK_SIZE, %ebx + mul %ebx + add %eax, %esp call secondary_cpu_init 1: hlt diff --git a/src/cpu/x86/pae/pgtbl.c b/src/cpu/x86/pae/pgtbl.c index 814c5f1..7aa17c2 100644 --- a/src/cpu/x86/pae/pgtbl.c +++ b/src/cpu/x86/pae/pgtbl.c @@ -3,8 +3,10 @@ */ #include <console/console.h> +#include <device/device.h> #include <cpu/cpu.h> #include <cpu/x86/pae.h> +#include <cpu/x86/lapic.h> #include <string.h> static void paging_off(void) @@ -43,6 +45,14 @@ static void paging_on(void *pdp) ); } +static int cpu_index(void) +{ + device_t dev = dev_find_lapic(lapicid()); + if (!dev) + return -1; + return dev->path.apic.index; +} + void *map_2M_page(unsigned long page) { struct pde { @@ -60,7 +70,9 @@ void *map_2M_page(unsigned long page) unsigned long window; void *result; int i; + index = cpu_index(); + if ((index < 0) || (index >= CONFIG_MAX_CPUS)) { return MAPPING_ERROR; } diff --git a/src/drivers/i2c/w83795/w83795.c b/src/drivers/i2c/w83795/w83795.c index 392471a..12be4da 100644 --- a/src/drivers/i2c/w83795/w83795.c +++ b/src/drivers/i2c/w83795/w83795.c @@ -22,6 +22,7 @@ #include <console/console.h> #include <device/device.h> #include "southbridge/amd/cimx/sb700/smbus.h" /*SMBUS_IO_BASE*/ +#include <cpu/x86/lapic.h> #include "w83795.h" static u32 w83795_set_bank(u8 bank) @@ -224,10 +225,8 @@ static void w83795_init(w83795_fan_mode_t mode, u8 dts_src) static void w83795_hwm_init(device_t dev) { struct device *cpu; - struct cpu_info *info; - info = cpu_info(); - cpu = info->cpu; + cpu = dev_find_lapic(lapicid()); if (!cpu) die("CPU: missing cpu device structure"); diff --git a/src/include/cpu/cpu.h b/src/include/cpu/cpu.h index c2113c1..120e955 100644 --- a/src/include/cpu/cpu.h +++ b/src/include/cpu/cpu.h @@ -4,11 +4,13 @@ #include <arch/cpu.h> #if !defined(__ROMCC__) -void cpu_initialize(void); +void cpu_initialize(struct bus *cpu_bus); struct bus; void initialize_cpus(struct bus *cpu_bus); void secondary_cpu_init(void); +extern unsigned int apcount; + #if !CONFIG_WAIT_BEFORE_CPUS_INIT #define cpus_ready_for_init() do {} while(0) #else diff --git a/src/include/cpu/x86/lapic.h b/src/include/cpu/x86/lapic.h index 078f2a7..ce61ee5 100644 --- a/src/include/cpu/x86/lapic.h +++ b/src/include/cpu/x86/lapic.h @@ -52,21 +52,6 @@ static inline __attribute__((always_inline)) unsigned long lapicid(void) } #ifndef __ROMCC__ -#if CONFIG_AP_IN_SIPI_WAIT != 1 -/* If we need to go back to sipi wait, we use the long non-inlined version of - * this function in lapic_cpu_init.c - */ -static inline __attribute__((always_inline)) void stop_this_cpu(void) -{ - /* Called by an AP when it is ready to halt and wait for a new task */ - for(;;) { - hlt(); - } -} -#else -void stop_this_cpu(void); -#endif - #if !defined(__PRE_RAM__) #define xchg(ptr,v) ((__typeof__(*(ptr)))__xchg((unsigned long)(v),(ptr),sizeof(*(ptr)))) diff --git a/src/include/device/path.h b/src/include/device/path.h index 63e9538..018fb93 100644 --- a/src/include/device/path.h +++ b/src/include/device/path.h @@ -40,6 +40,7 @@ struct apic_path unsigned apic_id; unsigned node_id; unsigned core_id; + unsigned index; }; struct apic_cluster_path

1 0