January 2009 - coreboot - mail.coreboot.org

#95: Run coreboot in VirtualBox
by coreboot Dec. 9, 2014

Dec. 9, 2014

#95: Run coreboot in VirtualBox ---------------------------------+------------------------------------------ Reporter: uwe | Owner: somebody Type: defect | Status: new Priority: minor | Milestone: Component: misc | Version: Keywords: | Dependencies: Patchstatus: there is no patch | ---------------------------------+------------------------------------------ It would be nice if we could test coreboot images in VirtualBox, see http://virtualbox.org/. VirtualBox does not (yet) provide a simple mechanism to use a different BIOS in their emulated machines (something like "-L" in qemu). Instead the BIOS image (a custom bochs BIOS + LGPL'g VGABIOS) is converted to C code (an array of bytes, or the like) and merged into the VirtualBox executable. The relevant files are {{{ src/VBox/Devices/PC/DevPcBios.cpp bldprogs/bin2c.c }}} if someone want to hack VirtualBox to easily support using coreboot images instead of their usual BIOS. -- Ticket URL: <http://tracker.coreboot.org/trac/coreboot/ticket/95> coreboot <http://www.coreboot.org/>

2 8

EHCI debug port finder
by Carl-Daniel Hailfinger May 30, 2014

May 30, 2014

I wanted to know which physical port of my multiple USB controllers have the debug capability. There was no way to find that easily, so I created a tool which will do most of the work for the user. Example output: The following PCI devices support a USB debug port (says lspci): 0000:00:1d.7 The following PCI devices support a USB debug port (says the kernel): 0000:00:1d.7 PCI device 0000:00:1d.7, USB bus 3, USB physical port 1 Currently connected high-speed devices: /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M |__ Port 2: Dev 20, If 0, Class=stor., Driver=usb-storage, 480M The output can be improved, but it's a good start. Regards, Carl-Daniel -- http://www.hailfinger.org/

5 13

mptable and irq_tables.c for MSI P35 Neo (MS-7360)
by Fred . Nov. 30, 2011

Nov. 30, 2011

I've attached the mptable file, and irq_tables.c file.

1 1

MSI P35 Neo (MS-7360) motherboard
by Fred . Nov. 30, 2011

Nov. 30, 2011

Files attached. MSI P35 Neo (MS-7360) Intel P35 chipset. Fintek F71882FG/F71883FG super i/o. ICH9 southbridge. $ dmidecode $ dmidecode --dump $ hardinfo $ lshw $ lspci -n $ lspci -tvnn $ lspci -v $ superiotool -dV Hope it helps.

1 1

#110: Allow for per-device subsystem IDs
by coreboot Oct. 1, 2010

Oct. 1, 2010

#110: Allow for per-device subsystem IDs ---------------------------------+------------------------------------------ Reporter: uwe | Owner: somebody Type: enhancement | Status: new Priority: minor | Milestone: Component: coreboot | Version: v3 Keywords: | Dependencies: Patchstatus: there is no patch | ---------------------------------+------------------------------------------ Currently both v2 and v3 only allow us to use one global set of PCI subsystem IDs, which is too simplistic. In theory (and often in practice) each PCI device has (or can have) its own subsystem ID. We should fix this, at least in v3, possibly also in v2. See also http://www.coreboot.org/pipermail/coreboot/2008-July/036514.html -- Ticket URL: <http://tracker.coreboot.org/trac/coreboot/ticket/110> coreboot <http://www.coreboot.org/>

1 2

flashrom patch: add support for Abit AB-BM6 board
by Tim ter Laak Sept. 13, 2010

Sept. 13, 2010

Hello all, This patch adds support for the Abit AB-BM6 mainboard to flashrom. The biggest part is a generic function to lower a GPIO line on the PIIX4E southbridge, copied and adapted from its ich_gpio_raise() counterpart (mostly lower instead of raise, followed names from the PIIX4E datasheet). The board specific function then uses this to lower GPO 26. Signed-off-by: Tim ter Laak <timl(a)scintilla.utwente.nl> --- The patch was made from the flashrom subdir, because svn diff from the top-level coreboot dir (as per the directions in the Development Guidelines on the wiki) didn't seem to work for me. Probably because flashrom is fetched externally when checking out coreboot? Anyway, I hope this is okay. If you really prefer a diff from the top-level dir just let me know, and I'll regenerate it with gnu diff. Kind regards, Tim. Index: board_enable.c =================================================================== --- board_enable.c (revision 3559) +++ board_enable.c (working copy) @@ -349,6 +349,58 @@ } /** + * Set the specified GPIO on the specified PIIX4 southbridge to low. + * + * @param name The name of this board. + * @param piix_vendor PCI vendor ID of the specified PIIX4 southbridge. (0x8086) + * @param piix_device PCI device ID of the specified PIIX4 southbridge, function Power Management (0x7113 for PIIX4E) + * @param pmbase_reg PMBASE register offset in the bridge. (0x40 for PIIX4E) + * @param pmbase_mask PMBASE bitmask (0xFFC0) + * @param gporeg Offset of GPOREG register in I/O space, relative to GPIOBASE. (0x34) + * @param gpio_bit The bit (GPIO) which shall be set to low. + * @return If the write-enable was successful return 0, otherwise return -1. + */ +static int piix4_gpio_lower(const char *name, uint16_t piix_vendor, + uint16_t piix_device, uint8_t pmbase_reg, + uint8_t gporeg, uint32_t pmbase_mask, + unsigned int gpio_bit) +{ + struct pci_dev *dev; + uint16_t pmbar; + uint32_t reg32; + + dev = pci_dev_find(piix_vendor, piix_device); /* Intel PIIX4 ACPI function */ + if (!dev) { + fprintf(stderr, "\nERROR: PIIX4 dev %4x:%4x not found.\n", + piix_vendor, piix_device); + return -1; + } + + /* Use PMBASE register to find the I/O space for GPIO. */ + pmbar = pci_read_word(dev, pmbase_reg) & pmbase_mask; + + /* Set specified GPIO to high. */ + reg32 = INL(pmbar + gporeg); + OUTB(0x00, 0xEB); /* dummy write to unused port as delay */ + + reg32 &= ~(1 << gpio_bit); + OUTL(reg32, pmbar + gporeg); + OUTB(0x00, 0xEB); /* another delay */ + + return 0; +} + +/** + * Suited for Abit AB-BM6. + */ +static int piix4_gpio26_lower(const char *name) +{ + return piix4_gpio_lower(name, 0x8086, 0x7113, 0x40, 0x34, 0xffc0, 26); +} + + + +/** * Suited for Acorp 6A815EPD. */ static int board_acorp_6a815epd(const char *name) @@ -672,6 +724,8 @@ NULL, NULL, "GIGABYTE GA-7VT600", board_biostar_p4m80_m4}, {0x1106, 0x3149, 0x1462, 0x7094, 0x10ec, 0x8167, 0x1462, 0x094c, NULL, NULL, "MSI K8T Neo2", w83627thf_gpio4_4_raise_2e}, + {0x8086, 0x7190, 0x0000, 0x0000, 0x8086, 0x7110, 0x0000, 0x0000, + "abit", "ab-bm6", "Abit AB-BM6", piix4_gpio26_lower}, {0, 0, 0, 0, 0, 0, 0, 0, NULL, NULL} /* Keep this */ };

5 13

filo and usb boot
by Masoud Fatollahy Aug. 18, 2010

Aug. 18, 2010

Hi, Why is it problem to boot from an usb port when we are using linuxbios and filo. as I can see all usb code are there, what is missing? Thanks, /Masoud

4 8

#108: Add int 10 VESA video driver to libpayload
by coreboot April 15, 2010

April 15, 2010

#108: Add int 10 VESA video driver to libpayload ---------------------------------+------------------------------------------ Reporter: stuge | Owner: somebody Type: enhancement | Status: new Priority: major | Milestone: Component: libpayload | Version: Keywords: video | Dependencies: Patchstatus: there is no patch | ---------------------------------+------------------------------------------ -- Ticket URL: <http://tracker.coreboot.org/trac/coreboot/ticket/108> coreboot <http://www.coreboot.org/>

1 1

#103: flashrom: Don't exit() after successful erase operation
by coreboot April 12, 2010

April 12, 2010

#103: flashrom: Don't exit() after successful erase operation ---------------------------------+------------------------------------------ Reporter: stuge | Owner: somebody Type: defect | Status: new Priority: major | Milestone: flashrom v1.0 Component: flashrom | Version: Keywords: erase exit | Dependencies: Patchstatus: there is no patch | ---------------------------------+------------------------------------------ -- Ticket URL: <http://tracker.coreboot.org/trac/coreboot/ticket/103> coreboot <http://www.coreboot.org/>

1 13

#119: Winbond W39V040FBPZ is not written correctly by flashrom
by coreboot April 12, 2010

April 12, 2010

#119: Winbond W39V040FBPZ is not written correctly by flashrom -----------------------------------------+---------------------------------- Reporter: charles.herndon@… | Owner: somebody Type: enhancement | Status: new Priority: minor | Milestone: Component: flashrom | Version: v2 Keywords: W39V040FBPZ | Dependencies: Patchstatus: there is no patch | -----------------------------------------+---------------------------------- Flash device is detected as a Winbond W39V040B device. Flashrom attempts to flash device, but verification fails. No actual writing to the chip appears to be done. Tried changing write and erase in flashchips.c to: jedec, winbond_fwhub and 49lfxxxc. ./flashrom -wv xxxx.bin Calibrating delay loop... OK. No coreboot table found. Found chipset "Intel ICH7/ICH7R", enabling flash write... OK. Found chip "Winbond W39V040B" (512 KB) at physical address 0xfff80000. Flash image seems to be a legacy BIOS. Disabling checks. Programming page: 0007 at address: 0x00070000 Verifying flash... FAILED! Expected=0xc7, Read=0x49 -- Ticket URL: <http://tracker.coreboot.org/trac/coreboot/ticket/119> coreboot <http://www.coreboot.org/>

1 7