May 2006 - coreboot - mail.coreboot.org

Re: [LinuxBIOS] BIOS Saver RD1
by Ken Fuchs June 5, 2007

June 5, 2007

> On Wed, Aug 03, 2005 at 11:59:20AM +0900, Jun OKAJIMA wrote: > > Probably, most guys here use BIOS Saver. > > And it works well? > > In mine, RD1 for PLCC gets not being writable suddenly. > > I mean, it seems writable but # flash_rom -v fails. > > I solved this problem by a quick hack. > > > > How about yours? You can write RD1 or W49F002U well? > > Any problem happen? Johnathan McDowell wrote: > Even after that it's sometimes a bit flakey and I have to erase, then > write it. I've put the board's original BIOS in the RD1 and am writing > to the SST 39SF020A instead, which works without problems. I've read posts about the RD1 that suggest its integrated flash device is low quality and it may take 10 or more flash attempts to get a good flash update to the RD1 flash device. As a result, many RD1 BIOS Savior users will flash the commercial BIOS image (or other known good BIOS image) into the RD1 integrated flash device as many times as needed to get an image that boots. Then use the original BIOS device to flash test BIOS image (usually LinuxBIOS images among this group), since the original BIOS device usually flashes OK on the first attempt. I've used the RD1 in the above fashion with great success on the Tyan S2885 mainboard. The same RD1 would not work on the nVidia CK8-04 CRB mainboard. I think the CK8-04 CRB requires a flash device that the RD1 does not support. However, the RD1 worked well as an "do nothing" adapter which allowed swapping the BIOS flash device between my flash burner and the mainboard without any wear to the mainboard's BIOS socket. BTW, my flash burner is an older Enhanced Willem Universal Programmer. I got mine for only $60 US over a year ago. I've seen it for less than $40 on eBay a few weeks ago. The newest model is going for about $50 US. It does a LinuxBIOS flash in about 5 minutes; not bad for a $60 burner. However, it does require changing DIP switches to match an image for each device it can program. Great for the amateur or professional with a small budget. > > BTW, a cable of your RD1 is not broken? > > I needed soldering to fix it. > Mine was fine out of the box. Mine cable and switch worked fine out of the box as well. Sincerely, Ken Fuchs <kfuchs(a)winternet.com> ami-mac-sun

16 47

Re: [LinuxBIOS] selection of compression algorithm
by Carl-Daniel Hailfinger Oct. 27, 2006

Oct. 27, 2006

yhlu wrote: > then how about the lines for 7z uncompress code? > > YH Working on it. 7z decompressor is really small (8 kb compiled on i386) and written in ISO C (1884 lines of code), but compressor is big and written in C++. Does it still make sense to try to use 7z? How much RAM is the decompressor allowed to use? Regards, Carl-Daniel -- http://www.hailfinger.org/

5 12

Re: [LinuxBIOS] some more tyan/s2881 questions
by Lu, Yinghai July 6, 2006

July 6, 2006

I have inited the hw sensors in LinuxBIOS for s2881. So you could use lmsensor to check the FAN speed. The config file is on Tyan web. For the Fan control, there should more some reg setting...to reduce the FAN speed winbond and adm1027... YH

4 12

[LinuxBIOS] Kernel will not boot
by Philipp Degler July 3, 2006

July 3, 2006

Hi, I tried various payloads to boot the system. Filo could not find my hda saying floating bus. Etherboot loads OK and gets a kernel elf image via tftp but kernel is not loading. Do you have an idea what could be the problem? Maybe some PCI-Devices not initialized correctly? VGA-Support is turned off, no pci cards in the slots, 2GB RAM, Using 2.6 static kernel with vga and fb options turned completely off. LinuxBIOS was compiled with gcc (GCC) 3.3.3 (SuSE Linux) and binutils-2.15.90.0.1.1-30 (binutils-32bit-9.1-200404070910) I appended the trace of LinuxBIOS with loglevel 9. thx phil --------- LinuxBIOS-1.1.8_Fallback Mon Mar 27 15:51:01 CEST 2006 starting... i386 console_init report_bist_failure setup_default_resource_map setting up resource map.... 0000c144 <-00000000 0000c14c <-00000001 0000c154 <-00000002 0000c15c <-00000003 0000c164 <-00000004 0000c16c <-00000005 0000c174 <-00000006 0000c17c <-00000007 0000c140 <-00000000 0000c148 <-00000000 0000c150 <-00000000 0000c158 <-00000000 0000c160 <-00000000 0000c168 <-00000000 0000c170 <-00000000 0000c178 <-00000000 0000c184 <-00000000 0000c18c <-00000000 0000c194 <-00000000 0000c19c <-00000000 0000c1a4 <-00000000 0000c1ac <-00000000 0000c1b4 <-00000000 0000c180 <-00000000 0000c188 <-00000000 0000c190 <-00000000 0000c198 <-00000000 0000c1a0 <-00000000 0000c1a8 <-00000000 0000c1b0 <-00000000 0000c1cc <-00000000 0000c1d4 <-00000000 0000c1dc <-00000000 0000c1c8 <-00000000 0000c1d0 <-00000000 0000c1d8 <-00000000 0000c1e4 <-00000000 0000c1e8 <-00000000 0000c1ec <-00000000 done. setup_coherent_ht_domain Enabling routing table for node 00 done. Enabling SMP settings (0,1) link=01 (1,0) link=01 setup_remote_node: done Renaming current temporary node to 01 done. Enabling routing table for node 01 done. 02 nodes initialized. coherent_ht_finalize done needs_reset ht reset - enable_smbus SMBus controller enabled memreset_setup sdram_initialize Ram1.00 setting up CPU00 northbridge registers done. Ram1.01 setting up CPU01 northbridge registers done. Ram2.00 Enabling dual channel memory 200Mhz Interleaved RAM: 0x00100000 KB Ram2.01 Enabling dual channel memory 200Mhz Interleaved RAM: 0x00200000 KB Ram3 ECC enabled ECC enabled Initializing memory: done Initializing memory: done Clearing initial memory region: done Ram4 Copying LinuxBIOS to ram. Jumping to LinuxBIOS. test LinuxBIOS-1.1.8_Fallback Mon Mar 27 15:51:01 CEST 2006 booting... Enumerating buses... scan_static_bus for Root Device PCI_DOMAIN: 0000 enabled APIC_CLUSTER: 0 enabled PCI_DOMAIN: 0000 scanning... PCI: pci_scan_bus for bus 0 PCI: 00:18.0 [1022/1100] bus ops PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] ops PCI: 00:18.3 [1022/1103] enabled PCI: devfn 0xc4, bad id 0xffffffff PCI: devfn 0xc5, bad id 0xffffffff PCI: devfn 0xc6, bad id 0xffffffff PCI: devfn 0xc7, bad id 0xffffffff PCI: 00:19.0 [1022/1100] bus ops PCI: 00:19.0 [1022/1100] enabled PCI: 00:19.1 [1022/1101] enabled PCI: 00:19.2 [1022/1102] enabled PCI: 00:19.3 [1022/1103] ops PCI: 00:19.3 [1022/1103] enabled PCI: devfn 0xcc, bad id 0xffffffff PCI: devfn 0xcd, bad id 0xffffffff PCI: devfn 0xce, bad id 0xffffffff PCI: devfn 0xcf, bad id 0xffffffff PCI: devfn 0xd0, bad id 0xffffffff PCI: devfn 0xd8, bad id 0xffffffff PCI: devfn 0xe0, bad id 0xffffffff PCI: devfn 0xe8, bad id 0xffffffff PCI: devfn 0xf0, bad id 0xffffffff PCI: devfn 0xf8, bad id 0xffffffff malloc Enter, size 668, free_mem_ptr 00040000 malloc 0x00040000 PCI: 01:00.0 [1022/7450] bus ops PCI: 01:00.0 [1022/7450] enabled Capability: 0x08 @ 0xa0 Capability: 0x08 @ 0xb8 flags: 0x8000 Capability: 0x08 @ 0xa0 Capability: 0x08 @ 0xb8 Capability: 0x08 @ 0xc0 flags: 0x0040 PCI: 01:01.0 count: 0002 static_count: 0001 PCI: 01:01.0 [1022/7450] enabled next_unitid: 0003 malloc Enter, size 668, free_mem_ptr 0004029c malloc 0x0004029c PCI: 01:00.0 [1022/7460] bus ops PCI: 01:00.0 [1022/7460] enabled Capability: 0x08 @ 0xc0 flags: 0x0080 PCI: 01:03.0 count: 0004 static_count: 0001 PCI: 01:03.0 [1022/7460] enabled next_unitid: 0007 PCI: pci_scan_bus for bus 1 PCI: devfn 0x0, bad id 0xffffffff PCI: 01:01.0 [1022/7450] enabled malloc Enter, size 668, free_mem_ptr 00040538 malloc 0x00040538 PCI: 01:01.1 [1022/7451] ops PCI: 01:01.1 [1022/7451] enabled PCI: devfn 0xa, bad id 0xffffffff PCI: devfn 0xb, bad id 0xffffffff PCI: devfn 0xc, bad id 0xffffffff PCI: devfn 0xd, bad id 0xffffffff PCI: devfn 0xe, bad id 0xffffffff PCI: devfn 0xf, bad id 0xffffffff malloc Enter, size 668, free_mem_ptr 000407d4 malloc 0x000407d4 PCI: 01:02.0 [1022/7450] bus ops PCI: 01:02.0 [1022/7450] enabled malloc Enter, size 668, free_mem_ptr 00040a70 malloc 0x00040a70 PCI: 01:02.1 [1022/7451] ops PCI: 01:02.1 [1022/7451] enabled PCI: devfn 0x12, bad id 0xffffffff PCI: devfn 0x13, bad id 0xffffffff PCI: devfn 0x14, bad id 0xffffffff PCI: devfn 0x15, bad id 0xffffffff PCI: devfn 0x16, bad id 0xffffffff PCI: devfn 0x17, bad id 0xffffffff PCI: 01:03.0 [1022/7460] enabled malloc Enter, size 668, free_mem_ptr 00040d0c malloc 0x00040d0c PCI: 01:04.0 [1022/7468] bus ops PCI: 01:04.0 [1022/7468] enabled malloc Enter, size 668, free_mem_ptr 00040fa8 malloc 0x00040fa8 PCI: 01:04.1 [1022/7469] ops PCI: 01:04.1 [1022/7469] enabled malloc Enter, size 668, free_mem_ptr 00041244 malloc 0x00041244 PCI: 01:04.2 [1022/746a] bus ops PCI: 01:04.2 [1022/746a] enabled malloc Enter, size 668, free_mem_ptr 000414e0 malloc 0x000414e0 PCI: 01:04.3 [1022/746b] bus ops PCI: 01:04.3 [1022/746b] enabled PCI: devfn 0x24, bad id 0x0 malloc Enter, size 668, free_mem_ptr 0004177c malloc 0x0004177c PCI: 01:04.5 [1022/746d] ops PCI: 01:04.5 [1022/746d] enabled malloc Enter, size 668, free_mem_ptr 00041a18 malloc 0x00041a18 PCI: 01:04.6 [1022/746e] ops PCI: 01:04.6 [1022/746e] enabled PCI: devfn 0x27, bad id 0x0 PCI: devfn 0x28, bad id 0xffffffff PCI: devfn 0x30, bad id 0xffffffff PCI: devfn 0x38, bad id 0xffffffff do_pci_scan_bridge for PCI: 01:01.0 PCI: pci_scan_bus for bus 2 PCI: devfn 0x0, bad id 0xffffffff PCI: devfn 0x8, bad id 0xffffffff PCI: devfn 0x10, bad id 0xffffffff malloc Enter, size 668, free_mem_ptr 00041cb4 malloc 0x00041cb4 PCI: 02:03.0 [8086/1076] enabled malloc Enter, size 668, free_mem_ptr 00041f50 malloc 0x00041f50 PCI: 02:04.0 [8086/1076] enabled malloc Enter, size 668, free_mem_ptr 000421ec malloc 0x000421ec PCI: 02:05.0 [1095/3114] enabled PCI: devfn 0x30, bad id 0xffffffff PCI: devfn 0x38, bad id 0xffffffff PCI: devfn 0x40, bad id 0xffffffff PCI: devfn 0x48, bad id 0xffffffff PCI: devfn 0x50, bad id 0xffffffff PCI: devfn 0x58, bad id 0xffffffff PCI: devfn 0x60, bad id 0xffffffff PCI: devfn 0x68, bad id 0xffffffff PCI: devfn 0x70, bad id 0xffffffff PCI: devfn 0x78, bad id 0xffffffff PCI: devfn 0x80, bad id 0xffffffff PCI: devfn 0x88, bad id 0xffffffff PCI: devfn 0x90, bad id 0xffffffff PCI: devfn 0x98, bad id 0xffffffff PCI: devfn 0xa0, bad id 0xffffffff PCI: devfn 0xa8, bad id 0xffffffff PCI: devfn 0xb0, bad id 0xffffffff PCI: devfn 0xb8, bad id 0xffffffff PCI: devfn 0xc0, bad id 0xffffffff PCI: devfn 0xc8, bad id 0xffffffff PCI: devfn 0xd0, bad id 0xffffffff PCI: devfn 0xd8, bad id 0xffffffff PCI: devfn 0xe0, bad id 0xffffffff PCI: devfn 0xe8, bad id 0xffffffff PCI: devfn 0xf0, bad id 0xffffffff PCI: devfn 0xf8, bad id 0xffffffff PCI: pci_scan_bus returning with max=02 Capability: 0x07 @ 0xa0 PCI: 02: Conventional PCI do_pci_scan_bridge returns max 2 do_pci_scan_bridge for PCI: 01:02.0 PCI: pci_scan_bus for bus 3 PCI: devfn 0x0, bad id 0xffffffff PCI: devfn 0x8, bad id 0xffffffff PCI: devfn 0x10, bad id 0xffffffff PCI: devfn 0x18, bad id 0xffffffff PCI: devfn 0x20, bad id 0xffffffff PCI: devfn 0x28, bad id 0xffffffff PCI: devfn 0x30, bad id 0xffffffff PCI: devfn 0x38, bad id 0xffffffff PCI: devfn 0x40, bad id 0xffffffff PCI: devfn 0x48, bad id 0xffffffff PCI: devfn 0x50, bad id 0xffffffff PCI: devfn 0x58, bad id 0xffffffff PCI: devfn 0x60, bad id 0xffffffff PCI: devfn 0x68, bad id 0xffffffff PCI: devfn 0x70, bad id 0xffffffff PCI: devfn 0x78, bad id 0xffffffff PCI: devfn 0x80, bad id 0xffffffff PCI: devfn 0x88, bad id 0xffffffff PCI: devfn 0x90, bad id 0xffffffff PCI: devfn 0x98, bad id 0xffffffff PCI: devfn 0xa0, bad id 0xffffffff PCI: devfn 0xa8, bad id 0xffffffff PCI: devfn 0xb0, bad id 0xffffffff PCI: devfn 0xb8, bad id 0xffffffff PCI: devfn 0xc0, bad id 0xffffffff PCI: devfn 0xc8, bad id 0xffffffff PCI: devfn 0xd0, bad id 0xffffffff PCI: devfn 0xd8, bad id 0xffffffff PCI: devfn 0xe0, bad id 0xffffffff PCI: devfn 0xe8, bad id 0xffffffff PCI: devfn 0xf0, bad id 0xffffffff PCI: devfn 0xf8, bad id 0xffffffff PCI: pci_scan_bus returning with max=03 Capability: 0x07 @ 0xa0 PCI: 03: 133MHz PCI-X do_pci_scan_bridge returns max 3 do_pci_scan_bridge for PCI: 01:03.0 PCI: pci_scan_bus for bus 4 malloc Enter, size 668, free_mem_ptr 00042488 malloc 0x00042488 PCI: 04:00.0 [1022/7464] bus ops PCI: 04:00.0 [1022/7464] enabled malloc Enter, size 668, free_mem_ptr 00042724 malloc 0x00042724 PCI: 04:00.1 [1022/7464] bus ops PCI: 04:00.1 [1022/7464] enabled malloc Enter, size 668, free_mem_ptr 000429c0 malloc 0x000429c0 PCI: 04:00.2 [1022/7463] ops USB2 disabled. PCI: 04:00.2 [1022/7463] disabled PCI: devfn 0x3, bad id 0xffffffff PCI: devfn 0x4, bad id 0xffffffff PCI: devfn 0x5, bad id 0xffffffff PCI: devfn 0x6, bad id 0xffffffff PCI: devfn 0x7, bad id 0xffffffff malloc Enter, size 668, free_mem_ptr 00042c5c malloc 0x00042c5c PCI: 04:01.0 [1022/7462] ops PCI: 04:01.0 [1022/7462] enabled PCI: devfn 0x10, bad id 0xffffffff PCI: devfn 0x18, bad id 0xffffffff PCI: devfn 0x20, bad id 0xffffffff PCI: devfn 0x28, bad id 0xffffffff malloc Enter, size 668, free_mem_ptr 00042ef8 malloc 0x00042ef8 PCI: 04:06.0 [1002/4752] enabled PCI: devfn 0x38, bad id 0xffffffff PCI: devfn 0x40, bad id 0xffffffff PCI: devfn 0x48, bad id 0xffffffff PCI: devfn 0x50, bad id 0xffffffff PCI: devfn 0x58, bad id 0xffffffff PCI: devfn 0x60, bad id 0xffffffff PCI: devfn 0x68, bad id 0xffffffff PCI: devfn 0x70, bad id 0xffffffff PCI: devfn 0x78, bad id 0xffffffff PCI: devfn 0x80, bad id 0xffffffff PCI: devfn 0x88, bad id 0xffffffff PCI: devfn 0x90, bad id 0xffffffff PCI: devfn 0x98, bad id 0xffffffff PCI: devfn 0xa0, bad id 0xffffffff PCI: devfn 0xa8, bad id 0xffffffff PCI: devfn 0xb0, bad id 0xffffffff PCI: devfn 0xb8, bad id 0xffffffff PCI: devfn 0xc0, bad id 0xffffffff PCI: devfn 0xc8, bad id 0xffffffff PCI: devfn 0xd0, bad id 0xffffffff PCI: devfn 0xd8, bad id 0xffffffff PCI: devfn 0xe0, bad id 0xffffffff PCI: devfn 0xe8, bad id 0xffffffff PCI: devfn 0xf0, bad id 0xffffffff PCI: devfn 0xf8, bad id 0xffffffff scan_static_bus for PCI: 04:00.0 scan_static_bus for PCI: 04:00.0 done scan_static_bus for PCI: 04:00.1 scan_static_bus for PCI: 04:00.1 done PCI: pci_scan_bus returning with max=04 do_pci_scan_bridge returns max 4 scan_static_bus for PCI: 01:04.0 scan_static_bus for PCI: 01:04.0 done scan_static_bus for PCI: 01:04.2 scan_static_bus for PCI: 01:04.2 done scan_static_bus for PCI: 01:04.3 scan_static_bus for PCI: 01:04.3 done PCI: pci_scan_bus returning with max=04 PCI: pci_scan_bus returning with max=04 PCI_DOMAIN: 0000 passpw: enabled PCI_DOMAIN: 0000 passpw: enabled APIC_CLUSTER: 0 scanning... PCI: 00:18.3 siblings=0 CPU: APIC: 00 enabled PCI: 00:19.3 siblings=0 CPU: APIC: 01 enabled scan_static_bus for Root Device done done Allocating resources... Reading resources... Root Device compute_allocate_io: base: 00000400 size: 00000000 align: 0 gran: 0 Root Device read_resources bus 0 link: 0 PCI_DOMAIN: 0000 read_resources bus 0 link: 0 PCI: 00:18.0 compute_allocate_io: base: 00000000 size: 00000000 align: 12 gran: 12 PCI: 00:18.0 read_resources bus 0 link: 0 PCI: 00:00.0 missing read_resources PCI: 00:00.1 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:01.1 missing read_resources PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:01.1 missing read_resources PCI: 00:01.2 missing read_resources PCI: 00:01.3 missing read_resources PCI: 00:18.0 read_resources bus 0 link: 0 done PCI: 00:18.0 compute_allocate_io: base: 00000000 size: 00000000 align: 12 gran: 12 done PCI: 00:18.0 compute_allocate_prefmem: base: 00000000 size: 00000000 align: 20 gran: 20 PCI: 00:18.0 read_resources bus 0 link: 0 PCI: 00:00.0 missing read_resources PCI: 00:00.1 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:01.1 missing read_resources PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:01.1 missing read_resources PCI: 00:01.2 missing read_resources PCI: 00:01.3 missing read_resources PCI: 00:18.0 read_resources bus 0 link: 0 done PCI: 00:18.0 compute_allocate_prefmem: base: 00000000 size: 00000000 align: 20 gran: 20 done PCI: 00:18.0 compute_allocate_mem: base: 00000000 size: 00000000 align: 20 gran: 20 PCI: 00:18.0 read_resources bus 0 link: 0 PCI: 00:00.0 missing read_resources PCI: 00:00.1 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:01.1 missing read_resources PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:01.1 missing read_resources PCI: 00:01.2 missing read_resources PCI: 00:01.3 missing read_resources PCI: 00:18.0 read_resources bus 0 link: 0 done PCI: 00:18.0 compute_allocate_mem: base: 00000000 size: 00000000 align: 20 gran: 20 done PCI: 00:18.0 compute_allocate_io: base: 00000000 size: 00000000 align: 12 gran: 12 PCI: 00:18.0 read_resources bus 1 link: 2 PCI: 01:01.0 compute_allocate_io: base: 00000000 size: 00000000 align: 12 gran: 12 PCI: 01:01.0 read_resources bus 2 link: 0 PCI: 01:01.0 read_resources bus 2 link: 0 done PCI: 02:03.0 18 * [0x00000000 - 0x0000003f] io PCI: 02:04.0 18 * [0x00000040 - 0x0000007f] io PCI: 02:05.0 20 * [0x00000080 - 0x0000008f] io PCI: 02:05.0 10 * [0x00000090 - 0x00000097] io PCI: 02:05.0 18 * [0x000000a0 - 0x000000a7] io PCI: 02:05.0 14 * [0x000000b0 - 0x000000b3] io PCI: 02:05.0 1c * [0x000000c0 - 0x000000c3] io PCI: 01:01.0 compute_allocate_io: base: 000000c4 size: 00001000 align: 12 gran: 12 done PCI: 01:01.0 compute_allocate_prefmem: base: 00000000 size: 00000000 align: 20 gran: 20 PCI: 01:01.0 read_resources bus 2 link: 0 PCI: 01:01.0 read_resources bus 2 link: 0 done PCI: 01:01.0 compute_allocate_prefmem: base: 00000000 size: 00000000 align: 20 gran: 20 done PCI: 01:01.0 compute_allocate_prefmem: base: fffffffffff00000 size: 00000000 align: 20 gran: 20 PCI: 01:01.0 read_resources bus 2 link: 0 PCI: 01:01.0 read_resources bus 2 link: 0 done PCI: 01:01.0 compute_allocate_prefmem: base: fffffffffff00000 size: 00000000 align: 20 gran: 20 done PCI: 01:01.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 2 prefmem PCI: 01:01.0 compute_allocate_mem: base: 00000000 size: 00000000 align: 20 gran: 20 PCI: 01:01.0 read_resources bus 2 link: 0 PCI: 01:01.0 read_resources bus 2 link: 0 done PCI: 02:05.0 30 * [0x00000000 - 0x0007ffff] mem PCI: 02:03.0 10 * [0x00080000 - 0x0009ffff] mem PCI: 02:04.0 10 * [0x000a0000 - 0x000bffff] mem PCI: 02:04.0 14 * [0x000c0000 - 0x000dffff] mem PCI: 02:04.0 30 * [0x000e0000 - 0x000fffff] mem PCI: 02:05.0 24 * [0x00100000 - 0x001003ff] mem PCI: 01:01.0 compute_allocate_mem: base: 00100400 size: 00200000 align: 20 gran: 20 done PCI: 01:03.0 compute_allocate_io: base: 00000000 size: 00000000 align: 12 gran: 12 PCI: 01:03.0 read_resources bus 4 link: 0 PCI: 01:03.0 read_resources bus 4 link: 0 done PCI: 04:06.0 14 * [0x00000000 - 0x000000ff] io PCI: 01:03.0 compute_allocate_io: base: 00000100 size: 00001000 align: 12 gran: 12 done PCI: 01:03.0 compute_allocate_prefmem: base: 00000000 size: 00000000 align: 20 gran: 20 PCI: 01:03.0 read_resources bus 4 link: 0 PCI: 01:03.0 read_resources bus 4 link: 0 done PCI: 01:03.0 compute_allocate_prefmem: base: 00000000 size: 00000000 align: 20 gran: 20 done PCI: 01:03.0 compute_allocate_prefmem: base: fff00000 size: 00000000 align: 20 gran: 20 PCI: 01:03.0 read_resources bus 4 link: 0 PCI: 01:03.0 read_resources bus 4 link: 0 done PCI: 01:03.0 compute_allocate_prefmem: base: fff00000 size: 00000000 align: 20 gran: 20 done PCI: 01:03.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 4 prefmem PCI: 01:03.0 compute_allocate_mem: base: 00000000 size: 00000000 align: 20 gran: 20 PCI: 01:03.0 read_resources bus 4 link: 0 PCI: 01:03.0 read_resources bus 4 link: 0 done PCI: 04:06.0 10 * [0x00000000 - 0x00ffffff] mem PCI: 04:06.0 30 * [0x01000000 - 0x0101ffff] mem PCI: 04:01.0 30 * [0x01020000 - 0x0102ffff] mem PCI: 04:00.0 10 * [0x01030000 - 0x01030fff] mem PCI: 04:00.1 10 * [0x01031000 - 0x01031fff] mem PCI: 04:01.0 10 * [0x01032000 - 0x01032fff] mem PCI: 04:06.0 18 * [0x01033000 - 0x01033fff] mem PCI: 01:03.0 compute_allocate_mem: base: 01034000 size: 01100000 align: 24 gran: 20 done PCI: 01:04.0 read_resources bus 0 link: 0 PCI: 01:04.0 read_resources bus 0 link: 0 done PCI: 00:18.0 read_resources bus 1 link: 2 done PCI: 01:01.0 1c * [0x00000000 - 0x00000fff] io PCI: 01:03.0 1c * [0x00001000 - 0x00001fff] io PCI: 01:04.3 58 * [0x00002000 - 0x000020ff] io PCI: 01:04.5 10 * [0x00002400 - 0x000024ff] io PCI: 01:04.6 10 * [0x00002800 - 0x000028ff] io PCI: 01:04.6 14 * [0x00002c00 - 0x00002c7f] io PCI: 01:04.5 14 * [0x00002c80 - 0x00002cbf] io PCI: 01:04.2 10 * [0x00002cc0 - 0x00002cdf] io PCI: 01:04.1 20 * [0x00002ce0 - 0x00002cef] io PCI: 00:18.0 compute_allocate_io: base: 00002cf0 size: 00003000 align: 12 gran: 12 done PCI: 00:18.0 compute_allocate_prefmem: base: 00000000 size: 00000000 align: 20 gran: 20 PCI: 00:18.0 read_resources bus 1 link: 2 PCI: 00:18.0 read_resources bus 1 link: 2 done PCI: 00:18.0 compute_allocate_prefmem: base: 00000000 size: 00000000 align: 20 gran: 20 done PCI: 00:18.0 compute_allocate_mem: base: 00000000 size: 00000000 align: 20 gran: 20 PCI: 00:18.0 read_resources bus 1 link: 2 PCI: 00:18.0 read_resources bus 1 link: 2 done PCI: 01:03.0 20 * [0x00000000 - 0x010fffff] mem PCI: 01:01.0 20 * [0x01100000 - 0x012fffff] mem PCI: 01:01.1 10 * [0x01300000 - 0x01300fff] mem PCI: 01:02.1 10 * [0x01301000 - 0x01301fff] mem PCI: 00:18.0 compute_allocate_mem: base: 01302000 size: 01400000 align: 24 gran: 20 done PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done Root Device read_resources bus 0 link: 0 done PCI: 00:18.0 1d2 * [0x00001000 - 0x00003fff] io PCI: 00:18.0 1d8 * [0x00004000 - 0x00003fff] io Root Device compute_allocate_io: base: 00004000 size: 00003c00 align: 12 gran: 0 done Root Device compute_allocate_mem: base: 00000000 size: 00000000 align: 0 gran: 0 Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done PCI: 00:18.3 94 * [0x00000000 - 0x03ffffff] mem PCI: 00:18.0 1a2 * [0x04000000 - 0x053fffff] mem PCI: 00:18.0 1b8 * [0x05400000 - 0x053fffff] prefmem PCI: 00:18.0 1b0 * [0x05400000 - 0x053fffff] mem PCI: 00:18.0 1aa * [0x05400000 - 0x053fffff] prefmem Root Device compute_allocate_mem: base: 05400000 size: 05400000 align: 26 gran: 0 done Done reading resources. Setting resources... Root Device compute_allocate_io: base: 00001000 size: 00003c00 align: 12 gran: 0 Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done PCI: 00:18.0 1d2 * [0x00001000 - 0x00003fff] io PCI: 00:18.0 1d8 * [0x00004000 - 0x00003fff] io Root Device compute_allocate_io: base: 00004000 size: 00003000 align: 12 gran: 0 done Root Device compute_allocate_mem: base: f8000000 size: 05400000 align: 26 gran: 0 Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done PCI: 00:18.3 94 * [0xf8000000 - 0xfbffffff] mem PCI: 00:18.0 1a2 * [0xfc000000 - 0xfd3fffff] mem PCI: 00:18.0 1b8 * [0xfd400000 - 0xfd3fffff] prefmem PCI: 00:18.0 1b0 * [0xfd400000 - 0xfd3fffff] mem PCI: 00:18.0 1aa * [0xfd400000 - 0xfd3fffff] prefmem Root Device compute_allocate_mem: base: fd400000 size: 05400000 align: 26 gran: 0 done Root Device assign_resources, bus 0 link: 0 PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 PCI: 00:18.0 compute_allocate_io: base: 00004000 size: 00000000 align: 12 gran: 12 PCI: 00:18.0 read_resources bus 0 link: 0 PCI: 00:00.0 missing read_resources PCI: 00:00.1 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:01.1 missing read_resources PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:01.1 missing read_resources PCI: 00:01.2 missing read_resources PCI: 00:01.3 missing read_resources PCI: 00:18.0 read_resources bus 0 link: 0 done PCI: 00:18.0 compute_allocate_io: base: 00004000 size: 00000000 align: 12 gran: 12 done PCI: 00:18.0 1d8 <- [0x0000004000 - 0x0000003fff] io <node 0 link 0> PCI: 00:18.0 compute_allocate_prefmem: base: fd400000 size: 00000000 align: 20 gran: 20 PCI: 00:18.0 read_resources bus 0 link: 0 PCI: 00:00.0 missing read_resources PCI: 00:00.1 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:01.1 missing read_resources PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:01.1 missing read_resources PCI: 00:01.2 missing read_resources PCI: 00:01.3 missing read_resources PCI: 00:18.0 read_resources bus 0 link: 0 done PCI: 00:18.0 compute_allocate_prefmem: base: fd400000 size: 00000000 align: 20 gran: 20 done PCI: 00:18.0 1b8 <- [0x00fd400000 - 0x00fd3fffff] prefmem <node 0 link 0> PCI: 00:18.0 compute_allocate_mem: base: fd400000 size: 00000000 align: 20 gran: 20 PCI: 00:18.0 read_resources bus 0 link: 0 PCI: 00:00.0 missing read_resources PCI: 00:00.1 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:01.1 missing read_resources PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:01.1 missing read_resources PCI: 00:01.2 missing read_resources PCI: 00:01.3 missing read_resources PCI: 00:18.0 read_resources bus 0 link: 0 done PCI: 00:18.0 compute_allocate_mem: base: fd400000 size: 00000000 align: 20 gran: 20 done PCI: 00:18.0 1b0 <- [0x00fd400000 - 0x00fd3fffff] mem <node 0 link 0> PCI: 00:18.0 compute_allocate_io: base: 00001000 size: 00003000 align: 12 gran: 12 PCI: 00:18.0 read_resources bus 1 link: 2 PCI: 00:18.0 read_resources bus 1 link: 2 done PCI: 01:01.0 1c * [0x00001000 - 0x00001fff] io PCI: 01:03.0 1c * [0x00002000 - 0x00002fff] io PCI: 01:04.3 58 * [0x00003000 - 0x000030ff] io PCI: 01:04.5 10 * [0x00003400 - 0x000034ff] io PCI: 01:04.6 10 * [0x00003800 - 0x000038ff] io PCI: 01:04.6 14 * [0x00003c00 - 0x00003c7f] io PCI: 01:04.5 14 * [0x00003c80 - 0x00003cbf] io PCI: 01:04.2 10 * [0x00003cc0 - 0x00003cdf] io PCI: 01:04.1 20 * [0x00003ce0 - 0x00003cef] io PCI: 00:18.0 compute_allocate_io: base: 00003cf0 size: 00003000 align: 12 gran: 12 done PCI: 00:18.0 1d2 <- [0x0000001000 - 0x0000003fff] io <node 0 link 2> PCI: 00:18.0 compute_allocate_prefmem: base: fd400000 size: 00000000 align: 20 gran: 20 PCI: 00:18.0 read_resources bus 1 link: 2 PCI: 00:18.0 read_resources bus 1 link: 2 done PCI: 00:18.0 compute_allocate_prefmem: base: fd400000 size: 00000000 align: 20 gran: 20 done PCI: 00:18.0 1aa <- [0x00fd400000 - 0x00fd3fffff] prefmem <node 0 link 2> PCI: 00:18.0 compute_allocate_mem: base: fc000000 size: 01400000 align: 24 gran: 20 PCI: 00:18.0 read_resources bus 1 link: 2 PCI: 00:18.0 read_resources bus 1 link: 2 done PCI: 01:03.0 20 * [0xfc000000 - 0xfd0fffff] mem PCI: 01:01.0 20 * [0xfd100000 - 0xfd2fffff] mem PCI: 01:01.1 10 * [0xfd300000 - 0xfd300fff] mem PCI: 01:02.1 10 * [0xfd301000 - 0xfd301fff] mem PCI: 00:18.0 compute_allocate_mem: base: fd302000 size: 01400000 align: 24 gran: 20 done PCI: 00:18.0 1a2 <- [0x00fc000000 - 0x00fd3fffff] mem <node 0 link 2> PCI: 00:18.0 assign_resources, bus 0 link: 0 PCI: 00:18.0 assign_resources, bus 0 link: 0 PCI: 00:18.0 assign_resources, bus 1 link: 2 PCI: 01:01.0 compute_allocate_io: base: 00001000 size: 00001000 align: 12 gran: 12 PCI: 01:01.0 read_resources bus 2 link: 0 PCI: 01:01.0 read_resources bus 2 link: 0 done PCI: 02:03.0 18 * [0x00001000 - 0x0000103f] io PCI: 02:04.0 18 * [0x00001040 - 0x0000107f] io PCI: 02:05.0 20 * [0x00001080 - 0x0000108f] io PCI: 02:05.0 10 * [0x00001090 - 0x00001097] io PCI: 02:05.0 18 * [0x000010a0 - 0x000010a7] io PCI: 02:05.0 14 * [0x000010b0 - 0x000010b3] io PCI: 02:05.0 1c * [0x000010c0 - 0x000010c3] io PCI: 01:01.0 compute_allocate_io: base: 000010c4 size: 00001000 align: 12 gran: 12 done PCI: 01:01.0 1c <- [0x0000001000 - 0x0000001fff] bus 2 io PCI: 01:01.0 compute_allocate_mem: base: fd100000 size: 00200000 align: 20 gran: 20 PCI: 01:01.0 read_resources bus 2 link: 0 PCI: 01:01.0 read_resources bus 2 link: 0 done PCI: 02:05.0 30 * [0xfd100000 - 0xfd17ffff] mem PCI: 02:03.0 10 * [0xfd180000 - 0xfd19ffff] mem PCI: 02:04.0 10 * [0xfd1a0000 - 0xfd1bffff] mem PCI: 02:04.0 14 * [0xfd1c0000 - 0xfd1dffff] mem PCI: 02:04.0 30 * [0xfd1e0000 - 0xfd1fffff] mem PCI: 02:05.0 24 * [0xfd200000 - 0xfd2003ff] mem PCI: 01:01.0 compute_allocate_mem: base: fd200400 size: 00200000 align: 20 gran: 20 done PCI: 01:01.0 20 <- [0x00fd100000 - 0x00fd2fffff] bus 2 mem PCI: 01:01.0 assign_resources, bus 2 link: 0 PCI: 02:03.0 10 <- [0x00fd180000 - 0x00fd19ffff] mem PCI: 02:03.0 18 <- [0x0000001000 - 0x000000103f] io PCI: 02:04.0 10 <- [0x00fd1a0000 - 0x00fd1bffff] mem PCI: 02:04.0 14 <- [0x00fd1c0000 - 0x00fd1dffff] mem PCI: 02:04.0 18 <- [0x0000001040 - 0x000000107f] io PCI: 02:04.0 30 <- [0x00fd1e0000 - 0x00fd1fffff] romem PCI: 02:05.0 10 <- [0x0000001090 - 0x0000001097] io PCI: 02:05.0 14 <- [0x00000010b0 - 0x00000010b3] io PCI: 02:05.0 18 <- [0x00000010a0 - 0x00000010a7] io PCI: 02:05.0 1c <- [0x00000010c0 - 0x00000010c3] io PCI: 02:05.0 20 <- [0x0000001080 - 0x000000108f] io PCI: 02:05.0 24 <- [0x00fd200000 - 0x00fd2003ff] mem PCI: 02:05.0 30 <- [0x00fd100000 - 0x00fd17ffff] romem PCI: 01:01.0 assign_resources, bus 2 link: 0 PCI: 01:01.1 10 <- [0x00fd300000 - 0x00fd300fff] mem64 PCI: 01:02.1 10 <- [0x00fd301000 - 0x00fd301fff] mem64 PCI: 01:03.0 compute_allocate_io: base: 00002000 size: 00001000 align: 12 gran: 12 PCI: 01:03.0 read_resources bus 4 link: 0 PCI: 01:03.0 read_resources bus 4 link: 0 done PCI: 04:06.0 14 * [0x00002000 - 0x000020ff] io PCI: 01:03.0 compute_allocate_io: base: 00002100 size: 00001000 align: 12 gran: 12 done PCI: 01:03.0 1c <- [0x0000002000 - 0x0000002fff] bus 4 io PCI: 01:03.0 compute_allocate_mem: base: fc000000 size: 01100000 align: 24 gran: 20 PCI: 01:03.0 read_resources bus 4 link: 0 PCI: 01:03.0 read_resources bus 4 link: 0 done PCI: 04:06.0 10 * [0xfc000000 - 0xfcffffff] mem PCI: 04:06.0 30 * [0xfd000000 - 0xfd01ffff] mem PCI: 04:01.0 30 * [0xfd020000 - 0xfd02ffff] mem PCI: 04:00.0 10 * [0xfd030000 - 0xfd030fff] mem PCI: 04:00.1 10 * [0xfd031000 - 0xfd031fff] mem PCI: 04:01.0 10 * [0xfd032000 - 0xfd032fff] mem PCI: 04:06.0 18 * [0xfd033000 - 0xfd033fff] mem PCI: 01:03.0 compute_allocate_mem: base: fd034000 size: 01100000 align: 24 gran: 20 done PCI: 01:03.0 20 <- [0x00fc000000 - 0x00fd0fffff] bus 4 mem PCI: 01:03.0 assign_resources, bus 4 link: 0 PCI: 04:00.0 10 <- [0x00fd030000 - 0x00fd030fff] mem PCI: 04:00.1 10 <- [0x00fd031000 - 0x00fd031fff] mem PCI: 04:01.0 10 <- [0x00fd032000 - 0x00fd032fff] mem PCI: 04:01.0 30 <- [0x00fd020000 - 0x00fd02ffff] romem PCI: 04:06.0 10 <- [0x00fc000000 - 0x00fcffffff] mem PCI: 04:06.0 14 <- [0x0000002000 - 0x00000020ff] io PCI: 04:06.0 18 <- [0x00fd033000 - 0x00fd033fff] mem PCI: 04:06.0 30 <- [0x00fd000000 - 0x00fd01ffff] romem PCI: 01:03.0 assign_resources, bus 4 link: 0 PCI: 01:04.1 20 <- [0x0000003ce0 - 0x0000003cef] io PCI: 01:04.2 10 <- [0x0000003cc0 - 0x0000003cdf] io PCI: 01:04.3 58 <- [0x0000003000 - 0x00000030ff] io PCI: 01:04.5 10 <- [0x0000003400 - 0x00000034ff] io PCI: 01:04.5 14 <- [0x0000003c80 - 0x0000003cbf] io PCI: 01:04.6 10 <- [0x0000003800 - 0x00000038ff] io PCI: 01:04.6 14 <- [0x0000003c00 - 0x0000003c7f] io PCI: 00:18.0 assign_resources, bus 1 link: 2 PCI: 00:18.3 94 <- [0x00f8000000 - 0x00fbffffff] mem <gart> PCI: 00:19.3 94 <- [0x00f8000000 - 0x00fbffffff] mem <gart> PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 Root Device assign_resources, bus 0 link: 0 Done setting resources. Done allocating resources. Enabling resourcess... PCI: 00:18.0 cmd <- 140 PCI: 00:00.0 missing enable_resources PCI: 00:00.1 missing enable_resources PCI: 00:01.0 missing enable_resources PCI: 00:01.1 missing enable_resources PCI: 00:00.0 missing enable_resources PCI: 00:01.0 missing enable_resources PCI: 00:01.1 missing enable_resources PCI: 00:01.2 missing enable_resources PCI: 00:01.3 missing enable_resources PCI: 01:01.0 bridge ctrl <- 0003 PCI: 01:01.0 cmd <- 147 PCI: 02:03.0 cmd <- 143 PCI: 02:04.0 cmd <- 143 PCI: 02:05.0 cmd <- 143 PCI: 01:01.1 cmd <- 146 PCI: 01:02.1 cmd <- 146 PCI: 01:03.0 bridge ctrl <- 0003 PCI: 01:03.0 cmd <- 147 PCI: 04:00.0 cmd <- 142 PCI: 04:00.1 cmd <- 142 PCI: 04:01.0 cmd <- 142 PCI: 04:06.0 cmd <- 1c3 PCI: 01:04.0 cmd <- 14f PCI: 01:04.1 cmd <- 141 PCI: 01:04.2 cmd <- 141 PCI: 01:04.3 cmd <- 141 PCI: 01:04.5 cmd <- 141 PCI: 01:04.6 cmd <- 141 PCI: 00:18.1 subsystem <- 161f/3017 PCI: 00:18.1 cmd <- 140 PCI: 00:18.2 subsystem <- 161f/3017 PCI: 00:18.2 cmd <- 140 PCI: 00:18.3 cmd <- 140 PCI: 00:19.0 cmd <- 140 PCI: 00:19.1 subsystem <- 161f/3017 PCI: 00:19.1 cmd <- 140 PCI: 00:19.2 subsystem <- 161f/3017 PCI: 00:19.2 cmd <- 140 PCI: 00:19.3 cmd <- 140 done. Initializing devices... Root Device init PCI: 00:18.0 init PCI: 00:18.1 init PCI: 00:18.2 init PCI: 00:18.3 init NB: Function 3 Misc Control.. done. PCI: 00:19.0 init PCI: 00:19.1 init PCI: 00:19.2 init PCI: 00:19.3 init NB: Function 3 Misc Control.. done. APIC_CLUSTER: 0 init Initializing CPU #0 CPU: vendor AMD device f5a Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB ADDRESS_MASK_HIGH=0xff DONE variable MTRRs Clear out the extra MTRR's ADDRESS_MASK_HIGH=0xff ADDRESS_MASK_HIGH=0xff ADDRESS_MASK_HIGH=0xff ADDRESS_MASK_HIGH=0xff ADDRESS_MASK_HIGH=0xff ADDRESS_MASK_HIGH=0xff ADDRESS_MASK_HIGH=0xff call enable_var_mtrr() Leave x86_setup_var_mtrrs MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled microcode: equivalent processor rev id = 0x004a, patch id = 0x00000000 microcode: patch id that want to apply= 0x00000047 microcode: updated to patch id = 0x00000047 success Setting up local apic... apic_id: 0 done. Clearing memory 1024K - 1048576K: --------------- done CPU #0 Initialized Asserting INIT. Waiting for send to finish... +Deasserting INIT. Waiting for send to finish... +start_eip=0x00010000 #startup loops: 2. Sending STARTUP #1 to 1. After apic_write. Initializing CPU #1 Startup point 1. Waiting for send to finish... +CPU: vendor AMD device f5a Sending STARTUP #2 to 1. After apic_write. Enabling cache at rSteutpt ipnogi nfti x1e.d fMWTaRiRtsi(n0g- 8f8o)r tsyepned: tUoC inish... fAfter SSteatrttiunpg. RiWxaeidt iMnTgR Rfso(r0 -11 6C)P UTSy pteo: sWtBo,p dMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB ADDRESS_MASK_HIGH=0xff DONE variable MTRRs Clear out the extra MTRR's ADDRESS_MASK_HIGH=0xff ADDRESS_MASK_HIGH=0xff ADDRESS_MASK_HIGH=0xff ADDRESS_MASK_HIGH=0xff ADDRESS_MASK_HIGH=0xff ADDRESS_MASK_HIGH=0xff ADDRESS_MASK_HIGH=0xff call enable_var_mtrr() Leave x86_setup_var_mtrrs MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled microcode: equivalent processor rev id = 0x004a, patch id = 0x00000000 microcode: patch id that want to apply= 0x00000047 microcode: updated to patch id = 0x00000047 success Setting up local apic... apic_id: 1 done. Clearing memory 1048576K - 2097152K: ---------------- done CPU #1 Initialized All AP CPUs stopped PCI: 01:01.0 init PCI: 01:03.0 init PCI: 01:04.0 init for IRQ, reg 0x00000000 value 0x00000700 0x00000000 for IRQ, reg 0x00000001 value 0x00010000 0x00000000 for IRQ, reg 0x00000002 value 0x00010000 0x00000000 for IRQ, reg 0x00000003 value 0x00010000 0x00000000 for IRQ, reg 0x00000004 value 0x00010000 0x00000000 for IRQ, reg 0x00000005 value 0x00010000 0x00000000 for IRQ, reg 0x00000006 value 0x00010000 0x00000000 for IRQ, reg 0x00000007 value 0x00010000 0x00000000 for IRQ, reg 0x00000008 value 0x00010000 0x00000000 for IRQ, reg 0x00000009 value 0x00010000 0x00000000 for IRQ, reg 0x0000000a value 0x00010000 0x00000000 for IRQ, reg 0x0000000b value 0x00010000 0x00000000 for IRQ, reg 0x0000000c value 0x00010000 0x00000000 for IRQ, reg 0x0000000d value 0x00010000 0x00000000 for IRQ, reg 0x0000000e value 0x00010000 0x00000000 for IRQ, reg 0x0000000f value 0x00010000 0x00000000 for IRQ, reg 0x00000010 value 0x00010000 0x00000000 for IRQ, reg 0x00000011 value 0x00010000 0x00000000 for IRQ, reg 0x00000012 value 0x00010000 0x00000000 for IRQ, reg 0x00000013 value 0x00010000 0x00000000 for IRQ, reg 0x00000014 value 0x00010000 0x00000000 for IRQ, reg 0x00000015 value 0x00010000 0x00000000 for IRQ, reg 0x00000016 value 0x00010000 0x00000000 for IRQ, reg 0x00000017 value 0x00010000 0x00000000 RTC Init RTC: Checksum invalid zeroing cmos Invalid CMOS LB checksum enabling HPET @0xfed00000 PCI: 01:04.1 init PCI: 01:04.3 init set power on after power fail PCI: 02:03.0 init PCI: 02:04.0 init PCI: 02:05.0 init PCI: 04:01.0 init Reseting PHY... Done PCI: 04:06.0 init Devices initialized Copying IRQ routing tables to 0xf0000...done. Verifing copy of IRQ routing tables at 0xf0000...done Checking IRQ routing table consistency... check_pirq_routing_table() - irq_routing_table located at: 0x000f0000 done. Wrote the mp table end at: 00000020 - 0000021c Moving GDT to 0x500...ok Wrote linuxbios table at: 00000530 - 00000df8 checksum 5f51 Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 33:stream_init() - rom_stream: 0xfffd0000 - 0xfffdee87 Found ELF candiate at offset 0 header_offset is 0 Try to load at offset 0x0 n_type: 00000001 n_name(8): ELFBoot n_desc(10): Etherboot n_type: 00000002 n_name(8): ELFBoot n_desc(6): 5.2.6 Loading Etherboot version: 5.2.6 Dropping non PT_LOAD segment malloc Enter, size 32, free_mem_ptr 00043194 malloc 0x00043194 New segment addr 0x20000 size 0x18024 offset 0xb0 filesize 0x891c (cleaned up) New segment addr 0x20000 size 0x18024 offset 0xb0 filesize 0x891c lb: [0x0000000000004000, 0x000000000004e000) segment: [0x0000000000020000, 0x000000000002891c, 0x0000000000038024) bounce: [0x000000007ff88000, 0x000000007ff9091c, 0x000000007ffa0024) Loading Segment: addr: 0x000000007ff88000 memsz: 0x0000000000018024 filesz: 0x000000000000891c [ 0x000000007ff88000, 000000007ff9091c, 0x000000007ffa0024) <- 00000000000000b0 Clearing Segment: addr: 0x000000007ff9091c memsz: 0x000000000000f708 Loaded segments verified segments closed down stream Jumping to boot code at 0x20000 entry = 0x00020000 lb_start = 0x00004000 lb_size = 0x0004a000 adjust = 0x7ffb2000 buffer = 0x7ff6c000 elf_boot_notes = 0x0001b160 adjusted_boot_notes = 0x7ffcd160 ROM segment 0x0000 length 0x0000 reloc 0x00020000 CPU 2088 Mhz Etherboot 5.2.6 (GPL) http://etherboot.org Tagged ELF for [E1000] Relocating _text from: [00020000,00039710) to [7fee68f0,7ff00000) Boot from (N)etwork or (Q)uit? N .Probing pci nic... [e1000-82541gi]Ethernet addr: 00:D0:68:09:EC:FD e1000: Valid Link not detected [e1000-82541gi]Ethernet addr: 00:D0:68:09:EC:FE Searching for server (DHCP)... ...Me: xxx.xxx.xxx.xxx, Server: 134.155.45.16, Gateway xxx.xxx.xxx.xxx Loading xxx.xxx.xxx.xxx:/htxlinux.0 ... (ELF)... ............................................................................................................. ........................................................................................................................................................... ........................................................................................................................................................... ........................................................................................................................................................... ........................................................................................................................................................... ...................................................................done Firmware type: LinuxBIOS

2 2

Re: [LinuxBIOS] New guy in LinuxBios
by Lu, Yinghai June 19, 2006

June 19, 2006

No. It seems there is one MB need to set..., I forget the model... But amd chipset base MB should be ok to comment that out... YH -----Original Message----- From: Stefan Reinauer [mailto:stepan@coresystems.de] Sent: Thursday, May 11, 2006 10:01 AM To: Lu, Yinghai Cc: vincentetsou(a)nexcom.com.tw; linuxbios(a)linuxbios.org Subject: Re: [LinuxBIOS] New guy in LinuxBios * Lu, Yinghai <yinghai.lu(a)amd.com> [060511 18:32]: > Comment out several lines about links in resourcemap.c. Can we just comment this out? Or would we need to put the link number in the registers before writing? -- coresystems GmbH * Brahmsstr. 16 * D-79104 Freiburg i. Br. Tel.: +49 761 7668825 * Fax: +49 761 7664613 Email: info(a)coresystems.de * http://www.coresystems.de/

3 3

Re: [LinuxBIOS] Support for AM2 processors?
by Lu, Yinghai June 18, 2006

June 18, 2006

The support code is done, and will be released to public tree after the CPU is released to public. YH -----Original Message----- From: linuxbios-bounces(a)linuxbios.org [mailto:linuxbios-bounces@linuxbios.org] On Behalf Of Carl-Daniel Hailfinger Sent: Wednesday, April 19, 2006 4:35 PM To: linuxbios(a)linuxbios.org Subject: [LinuxBIOS] Support for AM2 processors? Hi, since the upcoming AM2 processors will have a new (DDR2) memory controller, does that mean the RAM initialization has to be rewritten completely? If so, is there any expected time when LinuxBIOS support for these processors will be available? Regards, Carl-Daniel -- http://www.hailfinger.org/ -- linuxbios mailing list linuxbios(a)linuxbios.org http://www.openbios.org/mailman/listinfo/linuxbios

2 1

Re: [LinuxBIOS] EPIA-MII 12000, almost there. ( newbie )
by Myles Watson June 14, 2006

June 14, 2006

I used the stock FC4 kernel with the same command line as you used. My autoboot was just hdb1:/linux_2.6.16.elf (I have a CD-ROM as hda) Good luck, Myles -----Original Message----- From: linuxbios-bounces(a)linuxbios.org [mailto:linuxbios-bounces@linuxbios.org] On Behalf Of Per Mellander Sent: Wednesday, May 31, 2006 6:53 AM To: myles(a)mouselemur.cs.byu.edu Cc: linuxbios(a)linuxbios.org Subject: Re: [LinuxBIOS] EPIA-MII 12000, almost there. ( newbie ) Now I get so far that the kernel is identified and loaded but then it breaks :( I created an elf with mkelfImage: # mkelfImage --kernel=/vmlinuz-2.6.16-1.2111_FC5 --output=/vmlinuz.elf --initrd=/initrd-2.6.16-1.2111_FC5.img --command-line="ro root=LABEL=/ rhgb quiet console=ttyS0 console=ttyS0,115200" ----8<------------------------------------------------------------- Jumping to boot code at 0x109ad4 FILO version 0.5 (root(a)mm.int.mmtab.se) Wed May 31 13:44:15 CEST 2006 Press <Enter> for default boot, or <Esc> for boot prompt... timed out boot: hda1:/vmlinuz.elf find_ide_controller: found PCI IDE controller 1106:0571 prog_if=0x8a find_ide_controller: primary channel: compatibility mode find_ide_controller: cmd_base=0x1f0 ctrl_base=0x3f4 ide_software_reset: Waiting for ide0 to become ready for reset... ok init_drive: Testing for hda init_drive: Probing for hda init_drive: LBA mode, sectors=268435455 init_drive: LBA48 mode, sectors=321672960 init_drive: Init device params... ok hda: LBA48 164GB: HDS722516VLAT80 Mounted ext2fs Loading Linux version 2.6.16-1.2111_FC5 (bhcompile(a)hs20-bc1-3.build.redhat.com) #1 Thu May 4 21:16:58 EDT 2006... Jumping to entry point... 0 LinuxBIOS-1.1.8.0Fallback Wed May 31 13:15:25 CEST 2006 starting... Enabling mainboard devices Enabling shadow ram ----8<------------------------------------------------------------- I get the same result when I try, AUTOBOOT_FILE = "hda1:/vmlinuz initrd=/initrd.img root=/dev/hda1 console=tty0 console=ttyS0,115200" so the problem is not in the elf image. Could you please send me a snippet from your AUTOBOOT or similar? Btw. Do I have to make a 'special' kernel to make this work or should the stock FC5 work? /Per On Tue, 30 May 2006 08:38:53 -0600, Myles Watson wrote > Did you try using mkelfImage from ftp://ftp.lnxi.com/pub/mkelfImage ? It > combines the vmlinuz & initrd files into one. > > To get my machine to boot I used the same kernel parameters as I found in > grub, set up by Fedora. > -- linuxbios mailing list linuxbios(a)linuxbios.org http://www.openbios.org/mailman/listinfo/linuxbios

6 18

[LinuxBIOS] OLPC (One Laptop Per Child) Developer's program.
by Jim Gettys June 1, 2006

June 1, 2006

As you know, we've said we were going to have a developer's program. You can find more information, including how to apply for boards at: http://wiki.laptop.org/index.php/Developers_Program Note that these are bare PC prototype boards, not packaged machines. Jim Gettys -- Jim Gettys One Laptop Per Child

2 1

[LinuxBIOS] EPIA-MII 12000, almost there. ( newbie )
by Per Mellander May 31, 2006

May 31, 2006

Hi list. I've been trying to get LinuxBIOS going on my EPIA-MII 12000 system. I've read numerous messages on the ML and Googling for answers. Still I can't get my system to boot properly. Following the HOWTO I've managed to create a linuxbios.rom that actually boots, starts the payload ( filo ) but then I don't get the kernel to load. I'm using LinuxBIOS snapshot as of 24th of May and Filo 0.5. The VGA-rom is extracted with: dd if=/dev/mem of=/video.bios.bin bs=65536 count=1 skip=12 My root is /dev/hdb1 and I've put my ( working ) kernel at /vmlinuz. ( It's a stock Fedora 5 kernel, 2.6.16-1.2111_FC5. ) When I use USE_GRUB = 1 and put a copy of my menu.lst in /boot/filo/menu.lst, I only get a grub prompt and when trying to manually load the kernel with: kernel /vmlinuz root=/dev/hdb1 boot It complains about unknown filetype, IIRC. I've also tried using: AUTOBOOT_FILE = "hdb1:/vmlinuz root=/dev/hdb1 console=tty0 console=ttyS0,115200" With this I get the LinuxBIOS to constantly restart. My actual question is therefore If there is anyone with a working setup that could please give me some help?

2 2

[LinuxBIOS] Problem with flashrom -E -c W49F002U
by Per Mellander May 31, 2006

May 31, 2006

I'm experiencing problem with the flashrom utility. I have a BIOS SAVIOUR RD1-PL, and at start it worked quite alright. I was able to flash the prom that's located on the RD1 and tried different settings in my LinuxBIOS. I was on the other hand not able to read the contents out of the original BIOS because it was not detected properly. I have an EPIA-MII 12000 with BIOS ver 1.35 ( bought it recently so it's quite new. ) The fact that I couldn't read the original BIOS didn't on the other hand keep me from flashing the part on the RD1. The big problem now is that I'm not able to erase the flash anymore, making it quite hard to continue developing my LinuxBIOS. # flashrom -E' Calibrating delay loop... ok No LinuxBIOS table found. Enabling flash write on VT8235...OK W49F002U found at physical address: 0xfffc0000 Flash part is W49F002U Erasing flash chip but when I read it back it's not empty. # flashrom -r test.bin Calibrating delay loop... ok No LinuxBIOS table found. Enabling flash write on VT8235...OK W49F002U found at physical address: 0xfffc0000 Flash part is W49F002U Reading Flash...done # hexdump test.bin | head -1 0000000 aa55 e970 7ffc 1b8b de34 83ca 0000 0000 # flashrom -E -V Calibrating delay loop... Setting up microsecond timing loop 170M loops per second ok No LinuxBIOS table found. Enabling flash write on VT8235...OK Trying Am29F040B, 512 KB probe_29f040b: id1 0xff, id2 0xff Trying Am29F016D, 2048 KB probe_29f040b: id1 0xff, id2 0xff Trying At29C040A, 512 KB probe_jedec: id1 0xff, id2 0xff Trying Mx29f002, 256 KB probe_29f002: id1 0xda, id2 0xb Trying SST29EE020A, 256 KB probe_jedec: id1 0xda, id2 0xb Trying SST28SF040A, 512 KB probe_28sf040: id1 0xff, id2 0xff Trying SST39SF020A, 256 KB probe_jedec: id1 0xda, id2 0xb Trying SST39VF020, 256 KB probe_jedec: id1 0xda, id2 0xb Trying SST49LF040B, 512 KB probe_jedec: id1 0xff, id2 0xff Trying SST49LF040, 512 KB probe_jedec: id1 0xff, id2 0xff Trying SST49LF080A, 1024 KB probe_jedec: id1 0xff, id2 0xff Trying SST49LF002A/B, 256 KB probe_jedec: id1 0xda, id2 0xb Trying SST49LF003A/B, 384 KB probe_jedec: id1 0xff, id2 0xff Trying SST49LF004A/B, 512 KB probe_jedec: id1 0xff, id2 0xff Trying SST49LF008A, 1024 KB probe_jedec: id1 0xff, id2 0xff Trying Pm49FL004, 512 KB probe_jedec: id1 0xff, id2 0xff Trying W29C011, 128 KB probe_jedec: id1 0xda, id2 0xb Trying W29C020C, 256 KB probe_jedec: id1 0x55, id2 0xaa Trying W49F002U, 256 KB probe_jedec: id1 0x55, id2 0xaa Trying W39V040A, 512 KB probe_jedec: id1 0xff, id2 0xff Trying M29F040B, 512 KB probe_29f040b: id1 0xff, id2 0xff Trying M29F400BT, 512 KB probe_m29f400bt: id1 0xff, id2 0xff Trying 82802ab, 512 KB probe_82802ab: id1 0xff, id2 0xff Trying 82802ac, 1024 KB probe_82802ab: id1 0xff, id2 0xff Trying LHF00L04, 1024 KB probe_lhf00l04: id1 0xff, id2 0xff No EEPROM/flash device found. which I find quite peculiar. Why don't I get a success only because I've put on '-V'? So I tried: # flashrom -E -V -c W49F002U Calibrating delay loop... Setting up microsecond timing loop 170M loops per second ok No LinuxBIOS table found. Enabling flash write on VT8235...OK Trying W49F002U, 256 KB probe_jedec: id1 0x55, id2 0xaa No EEPROM/flash device found. Still the same problem! Anyone that's have a hint why? I remember that when I started using the RD1-PL I noticed that if I did a 'verify' after 'write' it said that it didn't match. On the other hand was it the first time I flashed the device and if i read the flash I could see that it had been flashed by doing a 'hexdump -C' and verify it by looking for the string section . # hexdump -C test.bin | grep Linux | head -1 0001a800 00 4c 69 6e 75 78 42 49 4f 53 00 41 74 74 65 6d |.LinuxBIOS.Attem| My hair turns grey...

2 1