Change in coreboot[master]: nb/intel/sandybridge: Improve channel disable logic
Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/45500 ) Change subject: nb/intel/sandybridge: Improve channel disable logic ...................................................................... nb/intel/sandybridge: Improve channel disable logic Do not consider the failed channel's SPDs in emergency mode. Also, force a full training if not resuming from S3 and the saved data indicates a channel has failed. Special care needs to be taken as the selected memory frequency could be raised after a channel has been disabled. Tested on Asus P8Z77-V LX2, with a good DIMM on channel 0 and a bad DIMM on channel 1. The failing channel causes errors when discovering timB, and emergency mode raminit for the other channel is good enough to boot. With this commit: a. Regular boots always result in full training. b. The board still boots, as emergency raminit trained the good DIMM. c. S3 resume still works in all tested configurations. d. If pretending the bad DIMM is slower: 1. The MPLL gets locked at the slow frequency of the bad DIMM. 2. The first raminit attempt still fails miserably on the bad DIMM. 3. Emergency mode uses the frequency the MPLL is locked at. 4. The board boots with the good DIMM running at the slow frequency. With good DIMMs on both channels, everything works the same as before. Change-Id: I3d34594561680906cb0b15a9c6a5fa7a773c0496 Signed-off-by: Angel Pons <th3fanbus@gmail.com> --- M src/northbridge/intel/sandybridge/raminit.c M src/northbridge/intel/sandybridge/raminit_common.h M src/northbridge/intel/sandybridge/raminit_native.c 3 files changed, 38 insertions(+), 14 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/00/45500/1 diff --git a/src/northbridge/intel/sandybridge/raminit.c b/src/northbridge/intel/sandybridge/raminit.c index 319fea3..51c57c6 100644 --- a/src/northbridge/intel/sandybridge/raminit.c +++ b/src/northbridge/intel/sandybridge/raminit.c @@ -43,15 +43,7 @@ /* Disable a channel in ramctr_timing */ static void disable_channel(ramctr_timing *ctrl, int channel) { - ctrl->rankmap[channel] = 0; - - memset(&ctrl->rank_mirror[channel][0], 0, sizeof(ctrl->rank_mirror[0])); - - ctrl->channel_size_mb[channel] = 0; - ctrl->cmd_stretch[channel] = 0; - ctrl->mad_dimm[channel] = 0; - memset(&ctrl->timings[channel][0], 0, sizeof(ctrl->timings[0])); - memset(&ctrl->info.dimm[channel][0], 0, sizeof(ctrl->info.dimm[0])); + ctrl->failed_channels |= BIT(channel); } static bool nb_supports_ecc(const uint32_t capid0_a) @@ -163,6 +155,10 @@ FOR_ALL_CHANNELS { ctrl->channel_size_mb[channel] = 0; + /* Skip decoding the SPDs of failed channels */ + if (ctrl->failed_channels & BIT(channel)) + continue; + ch_dimms = 0; /* Count dimms on channel */ for (slot = 0; slot < NUM_SLOTS; slot++) { @@ -345,8 +341,21 @@ system_reset(); } + /* + * Discard the saved data if it is from raminit emergency mode. + * Ideally, we would not advertise support for ACPI S3 in such + * cases, because there is evidence that the RAM has stability + * problems. Until then, skip this sanity check on S3 resumes. + */ + if (!s3resume && ctrl_cached && ctrl_cached->failed_channels) { + printk(BIOS_ERR, "Stored timings indicate channels have failed.\n"); + + ctrl_cached = NULL; + } + /* Verify MRC cache for fast boot */ if (!s3resume && ctrl_cached) { + /* Load SPD unique information data. */ memset(spds, 0, sizeof(spds)); mainboard_get_spd(spds, 1); @@ -391,6 +400,13 @@ } if (err) { + /* + * We can't reinitialize the DRAM MPLL at a different frequency. + * As we want to ignore the SPDs on the failed channel, we have + * to use the same tCK in emergency mode to avoid some troubles. + */ + const u32 old_tCK = ctrl.tCK; + /* Fallback: disable failing channel */ printk(BIOS_ERR, "RAM training failed, trying fallback.\n"); printram("Disable failing channel.\n"); @@ -398,12 +414,15 @@ /* Reset internal state */ reinit_ctrl(&ctrl, cpuid); - /* Reset DDR3 frequency */ - dram_find_spds_ddr3(spds, &ctrl); - /* Disable failing channel */ disable_channel(&ctrl, GET_ERR_CHANNEL(err)); + /* Restore tCK */ + ctrl.tCK = old_tCK; + + /* Recalculate DDR3 frequency */ + dram_find_spds_ddr3(spds, &ctrl); + err = try_init_dram_ddr3(&ctrl, fast_boot, s3resume, me_uma_size); } diff --git a/src/northbridge/intel/sandybridge/raminit_common.h b/src/northbridge/intel/sandybridge/raminit_common.h index 32f2b44..cf3d6a9 100644 --- a/src/northbridge/intel/sandybridge/raminit_common.h +++ b/src/northbridge/intel/sandybridge/raminit_common.h @@ -105,7 +105,7 @@ /* * WARNING: Do not forget to increase MRC_CACHE_VERSION when the saved data is changed! */ -#define MRC_CACHE_VERSION 5 +#define MRC_CACHE_VERSION 6 typedef struct odtmap_st { u16 rttwr; @@ -185,6 +185,9 @@ /* Bits [0..11] of PM_DLL_CONFIG: Master DLL wakeup delay timer */ u16 mdll_wake_delay; + /* Bitmap of channels that have failed */ + u8 failed_channels; + u8 rankmap[NUM_CHANNELS]; int ref_card_offset[NUM_CHANNELS]; u32 mad_dimm[NUM_CHANNELS]; diff --git a/src/northbridge/intel/sandybridge/raminit_native.c b/src/northbridge/intel/sandybridge/raminit_native.c index c23a5ac..a469910 100644 --- a/src/northbridge/intel/sandybridge/raminit_native.c +++ b/src/northbridge/intel/sandybridge/raminit_native.c @@ -265,7 +265,9 @@ printk(BIOS_DEBUG, "PLL_REF100_CFG value: 0x%x\n", ref_100mhz_support); - ctrl->tCK = get_mem_min_tck(); + /* In emergency mode, use provided tCK if non-zero. Otherwise, calculate it. */ + if (!ctrl->failed_channels || !ctrl->tCK) + ctrl->tCK = get_mem_min_tck(); /* Find CAS latency */ while (1) { -- To view, visit https://review.coreboot.org/c/coreboot/+/45500 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I3d34594561680906cb0b15a9c6a5fa7a773c0496 Gerrit-Change-Number: 45500 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus@gmail.com> Gerrit-Reviewer: Patrick Rudolph <siro@das-labor.org> Gerrit-MessageType: newchange
Attention is currently required from: Evgeny Zinoviev. Hello build bot (Jenkins), Nico Huber, Arthur Heymans, Evgeny Zinoviev, Patrick Rudolph, I'd like you to reexamine a change. Please visit https://review.coreboot.org/c/coreboot/+/45500 to look at the new patch set (#4). Change subject: nb/intel/sandybridge: Improve channel disable logic ...................................................................... nb/intel/sandybridge: Improve channel disable logic Do not consider the failed channel's SPDs in emergency mode. Also, force a full training if not resuming from S3 and the saved data indicates a channel has failed. Special care needs to be taken as the selected memory frequency could be raised after a channel has been disabled. Tested on Asus P8Z77-V LX2, with a good DIMM on channel 0 and a bad DIMM on channel 1. The failing channel causes errors when discovering timB, and emergency mode raminit for the other channel is good enough to boot. With this commit: a. Regular boots always result in full training. b. The board still boots, as emergency raminit trained the good DIMM. c. S3 resume still works in all tested configurations. d. If pretending the bad DIMM is slower: 1. The MPLL gets locked at the slow frequency of the bad DIMM. 2. The first raminit attempt still fails miserably on the bad DIMM. 3. Emergency mode uses the frequency the MPLL is locked at. 4. The board boots with the good DIMM running at the slow frequency. With good DIMMs on both channels, everything works the same as before. Change-Id: I3d34594561680906cb0b15a9c6a5fa7a773c0496 Signed-off-by: Angel Pons <th3fanbus@gmail.com> --- M src/northbridge/intel/sandybridge/raminit.c M src/northbridge/intel/sandybridge/raminit_common.h M src/northbridge/intel/sandybridge/raminit_native.c 3 files changed, 37 insertions(+), 20 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/00/45500/4 -- To view, visit https://review.coreboot.org/c/coreboot/+/45500 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I3d34594561680906cb0b15a9c6a5fa7a773c0496 Gerrit-Change-Number: 45500 Gerrit-PatchSet: 4 Gerrit-Owner: Angel Pons <th3fanbus@gmail.com> Gerrit-Reviewer: Arthur Heymans <arthur@aheymans.xyz> Gerrit-Reviewer: Evgeny Zinoviev <me@ch1p.io> Gerrit-Reviewer: Nico Huber <nico.h@gmx.de> Gerrit-Reviewer: Patrick Rudolph <siro@das-labor.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply@coreboot.org> Gerrit-CC: Paul Menzel <paulepanter@users.sourceforge.net> Gerrit-Attention: Evgeny Zinoviev <me@ch1p.io> Gerrit-MessageType: newpatchset
Attention is currently required from: Angel Pons, Evgeny Zinoviev. Hello build bot (Jenkins), Nico Huber, Arthur Heymans, Evgeny Zinoviev, Patrick Rudolph, I'd like you to reexamine a change. Please visit https://review.coreboot.org/c/coreboot/+/45500 to look at the new patch set (#5). Change subject: nb/intel/sandybridge: Improve channel disable logic ...................................................................... nb/intel/sandybridge: Improve channel disable logic Do not consider the failed channel's SPDs in emergency mode. Also, force a full training if not resuming from S3 and the saved data indicates a channel has failed. Special care needs to be taken as the selected memory frequency could be raised after a channel has been disabled. Tested on Asus P8Z77-V LX2, with a good DIMM on channel 0 and a bad DIMM on channel 1. The failing channel causes errors when discovering timB, and emergency mode raminit for the other channel is good enough to boot. With this commit: a. Regular boots always result in full training. b. The board still boots, as emergency raminit trained the good DIMM. c. S3 resume still works in all tested configurations. d. If pretending the bad DIMM is slower: 1. The MPLL gets locked at the slow frequency of the bad DIMM. 2. The first raminit attempt still fails miserably on the bad DIMM. 3. Emergency mode uses the frequency the MPLL is locked at. 4. The board boots with the good DIMM running at the slow frequency. With good DIMMs on both channels, everything works the same as before. Change-Id: I3d34594561680906cb0b15a9c6a5fa7a773c0496 Signed-off-by: Angel Pons <th3fanbus@gmail.com> --- M src/northbridge/intel/sandybridge/raminit.c M src/northbridge/intel/sandybridge/raminit_common.h M src/northbridge/intel/sandybridge/raminit_native.c 3 files changed, 37 insertions(+), 20 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/00/45500/5 -- To view, visit https://review.coreboot.org/c/coreboot/+/45500 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I3d34594561680906cb0b15a9c6a5fa7a773c0496 Gerrit-Change-Number: 45500 Gerrit-PatchSet: 5 Gerrit-Owner: Angel Pons <th3fanbus@gmail.com> Gerrit-Reviewer: Arthur Heymans <arthur@aheymans.xyz> Gerrit-Reviewer: Evgeny Zinoviev <me@ch1p.io> Gerrit-Reviewer: Nico Huber <nico.h@gmx.de> Gerrit-Reviewer: Patrick Rudolph <siro@das-labor.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply@coreboot.org> Gerrit-CC: Paul Menzel <paulepanter@users.sourceforge.net> Gerrit-Attention: Angel Pons <th3fanbus@gmail.com> Gerrit-Attention: Evgeny Zinoviev <me@ch1p.io> Gerrit-MessageType: newpatchset
Attention is currently required from: Angel Pons, Evgeny Zinoviev. Nico Huber has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/45500 ) Change subject: nb/intel/sandybridge: Improve channel disable logic ...................................................................... Patch Set 5: (2 comments) Commit Message: https://review.coreboot.org/c/coreboot/+/45500/comment/07c81fd6_ced81538 PS5, Line 9: Do not consider the failed channel's SPDs in emergency mode. Also, force In very weird corner cases, this may fail while it worked before. For instance, two broken DIMMs and the faster rated one happened to work only with the SPD data of the slower. As I understand this change, the originally succeeding DIMM would then be trained again with only its own SPD data and may fail now even though it worked with the combined data. Just wanted to mention that because the commit message currently suggests (to me) that this change could only yield better results. File src/northbridge/intel/sandybridge/raminit.c: https://review.coreboot.org/c/coreboot/+/45500/comment/6e7b0a1f_565c236a PS5, Line 348: } I would much prefer to not write to the cache in emergency mode in the first place. Worst case scenario: training of one channel succeeds marginally, but DRAM doesn't work reliably and the system resets during boot. We'd write to flash in a loop. I guess the flash could survive that for a year in that loop or so, but it seems much better to avoid it. -- To view, visit https://review.coreboot.org/c/coreboot/+/45500 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I3d34594561680906cb0b15a9c6a5fa7a773c0496 Gerrit-Change-Number: 45500 Gerrit-PatchSet: 5 Gerrit-Owner: Angel Pons <th3fanbus@gmail.com> Gerrit-Reviewer: Arthur Heymans <arthur@aheymans.xyz> Gerrit-Reviewer: Evgeny Zinoviev <me@ch1p.io> Gerrit-Reviewer: Nico Huber <nico.h@gmx.de> Gerrit-Reviewer: Patrick Rudolph <siro@das-labor.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply@coreboot.org> Gerrit-CC: Paul Menzel <paulepanter@users.sourceforge.net> Gerrit-Attention: Angel Pons <th3fanbus@gmail.com> Gerrit-Attention: Evgeny Zinoviev <me@ch1p.io> Gerrit-Comment-Date: Fri, 26 Feb 2021 13:23:34 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Gerrit-MessageType: comment
Attention is currently required from: Nico Huber, Evgeny Zinoviev. Angel Pons has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/45500 ) Change subject: nb/intel/sandybridge: Improve channel disable logic ...................................................................... Patch Set 5: (2 comments) Commit Message: https://review.coreboot.org/c/coreboot/+/45500/comment/456dd048_7a62e92d PS5, Line 9: Do not consider the failed channel's SPDs in emergency mode. Also, force
In very weird corner cases, this may fail while it worked before. […] AIUI, each DIMM would fail to boot without any other DIMMs in the system. Why would a system with two broken DIMMs work?
File src/northbridge/intel/sandybridge/raminit.c: https://review.coreboot.org/c/coreboot/+/45500/comment/905075ab_c4255692 PS5, Line 348: }
I would much prefer to not write to the cache in emergency mode […] How would you handle S3 resume, then?
-- To view, visit https://review.coreboot.org/c/coreboot/+/45500 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I3d34594561680906cb0b15a9c6a5fa7a773c0496 Gerrit-Change-Number: 45500 Gerrit-PatchSet: 5 Gerrit-Owner: Angel Pons <th3fanbus@gmail.com> Gerrit-Reviewer: Arthur Heymans <arthur@aheymans.xyz> Gerrit-Reviewer: Evgeny Zinoviev <me@ch1p.io> Gerrit-Reviewer: Nico Huber <nico.h@gmx.de> Gerrit-Reviewer: Patrick Rudolph <siro@das-labor.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply@coreboot.org> Gerrit-CC: Paul Menzel <paulepanter@users.sourceforge.net> Gerrit-Attention: Nico Huber <nico.h@gmx.de> Gerrit-Attention: Evgeny Zinoviev <me@ch1p.io> Gerrit-Comment-Date: Fri, 26 Feb 2021 13:38:20 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: Nico Huber <nico.h@gmx.de> Gerrit-MessageType: comment
Attention is currently required from: Angel Pons, Evgeny Zinoviev. Nico Huber has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/45500 ) Change subject: nb/intel/sandybridge: Improve channel disable logic ...................................................................... Patch Set 5: (2 comments) Commit Message: https://review.coreboot.org/c/coreboot/+/45500/comment/1e9c3e87_d125e9f4 PS5, Line 9: Do not consider the failed channel's SPDs in emergency mode. Also, force
AIUI, each DIMM would fail to boot without any other DIMMs in the system. […] It could work by coincidence if one DIMM is broken in a way that it works with the SPD data of the other. It's just a made up example, nothing I would really expect. But the logic of your change dictates that such cases could regress. So I would mention that in the commit message, e.g.
In corner cases with unreliable DIMMs in both channels, this could result in a boot failure, even if the old code succeeded. File src/northbridge/intel/sandybridge/raminit.c: https://review.coreboot.org/c/coreboot/+/45500/comment/2dcab14e_249e1fc7 PS5, Line 348: }
How would you handle S3 resume, then? not (preferably)
The emergency mode seems like a nice feature so you don't end up with a brick. But I don't see a reason to support STR in such a state. IIRC, the current code allows both without risking a flashing loop. Your change to automatically try the training again seems valid, but you have to choose then: Either drop STR support, or risk a flashing loop. -- To view, visit https://review.coreboot.org/c/coreboot/+/45500 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I3d34594561680906cb0b15a9c6a5fa7a773c0496 Gerrit-Change-Number: 45500 Gerrit-PatchSet: 5 Gerrit-Owner: Angel Pons <th3fanbus@gmail.com> Gerrit-Reviewer: Arthur Heymans <arthur@aheymans.xyz> Gerrit-Reviewer: Evgeny Zinoviev <me@ch1p.io> Gerrit-Reviewer: Nico Huber <nico.h@gmx.de> Gerrit-Reviewer: Patrick Rudolph <siro@das-labor.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply@coreboot.org> Gerrit-CC: Paul Menzel <paulepanter@users.sourceforge.net> Gerrit-Attention: Angel Pons <th3fanbus@gmail.com> Gerrit-Attention: Evgeny Zinoviev <me@ch1p.io> Gerrit-Comment-Date: Sat, 27 Feb 2021 00:10:18 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: Nico Huber <nico.h@gmx.de> Comment-In-Reply-To: Angel Pons <th3fanbus@gmail.com> Gerrit-MessageType: comment
Stefan Reinauer has abandoned this change. ( https://review.coreboot.org/c/coreboot/+/45500?usp=email ) Change subject: nb/intel/sandybridge: Improve channel disable logic ...................................................................... Abandoned -- To view, visit https://review.coreboot.org/c/coreboot/+/45500?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I3d34594561680906cb0b15a9c6a5fa7a773c0496 Gerrit-Change-Number: 45500 Gerrit-PatchSet: 5 Gerrit-Owner: Angel Pons <th3fanbus@gmail.com> Gerrit-Reviewer: Arthur Heymans <arthur@aheymans.xyz> Gerrit-Reviewer: Evgeny Zinoviev <me@ch1p.io> Gerrit-Reviewer: Nico Huber <nico.h@gmx.de> Gerrit-Reviewer: Patrick Rudolph <siro@das-labor.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply@coreboot.org> Gerrit-CC: Paul Menzel <paulepanter@mailbox.org> Gerrit-MessageType: abandon
Angel Pons has restored this change. ( https://review.coreboot.org/c/coreboot/+/45500?usp=email ) Change subject: nb/intel/sandybridge: Improve channel disable logic ...................................................................... Restored -- To view, visit https://review.coreboot.org/c/coreboot/+/45500?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I3d34594561680906cb0b15a9c6a5fa7a773c0496 Gerrit-Change-Number: 45500 Gerrit-PatchSet: 5 Gerrit-Owner: Angel Pons <th3fanbus@gmail.com> Gerrit-Reviewer: Arthur Heymans <arthur@aheymans.xyz> Gerrit-Reviewer: Evgeny Zinoviev <me@ch1p.io> Gerrit-Reviewer: Nico Huber <nico.h@gmx.de> Gerrit-Reviewer: Patrick Rudolph <siro@das-labor.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply@coreboot.org> Gerrit-CC: Paul Menzel <paulepanter@mailbox.org> Gerrit-MessageType: restore
Angel Pons has abandoned this change. ( https://review.coreboot.org/c/coreboot/+/45500?usp=email ) Change subject: nb/intel/sandybridge: Improve channel disable logic ...................................................................... Abandoned No interest in pursuing this -- To view, visit https://review.coreboot.org/c/coreboot/+/45500?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I3d34594561680906cb0b15a9c6a5fa7a773c0496 Gerrit-Change-Number: 45500 Gerrit-PatchSet: 5 Gerrit-Owner: Angel Pons <th3fanbus@gmail.com> Gerrit-Reviewer: Arthur Heymans <arthur@aheymans.xyz> Gerrit-Reviewer: Evgeny Zinoviev <me@ch1p.io> Gerrit-Reviewer: Nico Huber <nico.h@gmx.de> Gerrit-Reviewer: Patrick Rudolph <rudolphpatrick05@gmail.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply@coreboot.org> Gerrit-CC: Paul Menzel <paulepanter@mailbox.org> Gerrit-CC: Stefan Reinauer <stefan.reinauer@coreboot.org> Gerrit-MessageType: abandon
participants (3)
-
Angel Pons (Code Review) -
Nico Huber (Code Review)
-
Stefan Reinauer (Code Review)