Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36712 ) Change subject: sb/intel/lynxpoint: Setup gpio in bootblock ...................................................................... sb/intel/lynxpoint: Setup gpio in bootblock GPIO setup is needed for verstage. verstage can also still happen after romstage so keep the GPIO init there too. Change-Id: I448ca12f5ddab362983429c508e518b7042ef760 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> --- M src/mainboard/asrock/h81m-hds/Makefile.inc M src/mainboard/google/beltino/Makefile.inc M src/mainboard/google/slippy/Makefile.inc M src/mainboard/intel/baskingridge/Makefile.inc M src/mainboard/supermicro/x10slm-f/Makefile.inc M src/southbridge/intel/common/Makefile.inc M src/southbridge/intel/lynxpoint/Makefile.inc M src/southbridge/intel/lynxpoint/bootblock.c M src/southbridge/intel/lynxpoint/early_pch.c M src/southbridge/intel/lynxpoint/pch.h 10 files changed, 22 insertions(+), 10 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/12/36712/1 diff --git a/src/mainboard/asrock/h81m-hds/Makefile.inc b/src/mainboard/asrock/h81m-hds/Makefile.inc index de18bc5..3fc7ac7 100644 --- a/src/mainboard/asrock/h81m-hds/Makefile.inc +++ b/src/mainboard/asrock/h81m-hds/Makefile.inc @@ -16,4 +16,5 @@ romstage-y += gpio.c ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads +bootblock-y += gpio.c bootblock-y += bootblock.c diff --git a/src/mainboard/google/beltino/Makefile.inc b/src/mainboard/google/beltino/Makefile.inc index 7535350..0ecb31d 100644 --- a/src/mainboard/google/beltino/Makefile.inc +++ b/src/mainboard/google/beltino/Makefile.inc @@ -23,5 +23,7 @@ romstage-y += variants/$(VARIANT_DIR)/led.c romstage-y += variants/$(VARIANT_DIR)/gpio.c +bootblock-y += variants/$(VARIANT_DIR)/gpio.c + subdirs-y += variants/$(VARIANT_DIR) CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/include diff --git a/src/mainboard/google/slippy/Makefile.inc b/src/mainboard/google/slippy/Makefile.inc index f80dcab..e35f93e 100644 --- a/src/mainboard/google/slippy/Makefile.inc +++ b/src/mainboard/google/slippy/Makefile.inc @@ -23,6 +23,8 @@ romstage-y += variants/$(VARIANT_DIR)/romstage.c romstage-y += variants/$(VARIANT_DIR)/gpio.c +bootblock-y += variants/$(VARIANT_DIR)/gpio.c + subdirs-y += variants/$(VARIANT_DIR) ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads diff --git a/src/mainboard/intel/baskingridge/Makefile.inc b/src/mainboard/intel/baskingridge/Makefile.inc index 91a7963..8f12999 100644 --- a/src/mainboard/intel/baskingridge/Makefile.inc +++ b/src/mainboard/intel/baskingridge/Makefile.inc @@ -17,6 +17,7 @@ ramstage-y += chromeos.c verstage-$(CONFIG_VBOOT_SEPARATE_VERSTAGE) += chromeos.c +bootblock-y += gpio.c romstage-y += gpio.c smm-y += mainboard_smi.c diff --git a/src/mainboard/supermicro/x10slm-f/Makefile.inc b/src/mainboard/supermicro/x10slm-f/Makefile.inc index 301070b..0b4f367 100644 --- a/src/mainboard/supermicro/x10slm-f/Makefile.inc +++ b/src/mainboard/supermicro/x10slm-f/Makefile.inc @@ -15,4 +15,5 @@ ## romstage-y += gpio.c +bootblock-y += gpio.c bootblock-y += bootblock.c diff --git a/src/southbridge/intel/common/Makefile.inc b/src/southbridge/intel/common/Makefile.inc index 5ca7daf..433a310 100644 --- a/src/southbridge/intel/common/Makefile.inc +++ b/src/southbridge/intel/common/Makefile.inc @@ -34,6 +34,7 @@ romstage-$(CONFIG_USBDEBUG) += usb_debug.c ramstage-$(CONFIG_USBDEBUG) += usb_debug.c +bootblock-$(CONFIG_SOUTHBRIDGE_INTEL_COMMON_GPIO) += gpio.c romstage-$(CONFIG_SOUTHBRIDGE_INTEL_COMMON_GPIO) += gpio.c ramstage-$(CONFIG_SOUTHBRIDGE_INTEL_COMMON_GPIO) += gpio.c smm-$(CONFIG_SOUTHBRIDGE_INTEL_COMMON_GPIO) += gpio.c diff --git a/src/southbridge/intel/lynxpoint/Makefile.inc b/src/southbridge/intel/lynxpoint/Makefile.inc index e53ed8d..bacaf74 100644 --- a/src/southbridge/intel/lynxpoint/Makefile.inc +++ b/src/southbridge/intel/lynxpoint/Makefile.inc @@ -50,6 +50,7 @@ romstage-y += rcba.c pmutil.c ifeq ($(CONFIG_INTEL_LYNXPOINT_LP),y) +bootblock-y += lp_gpio.c romstage-y += lp_gpio.c ramstage-y += lp_gpio.c smm-y += lp_gpio.c diff --git a/src/southbridge/intel/lynxpoint/bootblock.c b/src/southbridge/intel/lynxpoint/bootblock.c index 39e6925..abcb35b 100644 --- a/src/southbridge/intel/lynxpoint/bootblock.c +++ b/src/southbridge/intel/lynxpoint/bootblock.c @@ -16,6 +16,7 @@ #include <device/pci_ops.h> #include <cpu/intel/car/bootblock.h> #include "pch.h" +#include "lp_gpio.h" /* * Enable Prefetching and Caching. @@ -33,14 +34,6 @@ pci_write_config8(dev, 0xdc, reg8); } - -static void map_rcba(void) -{ - pci_devfn_t dev = PCI_DEV(0, 0x1f, 0); - - pci_write_config32(dev, RCBA, (uintptr_t)DEFAULT_RCBA | 1); -} - static void enable_port80_on_lpc(void) { /* Enable port 80 POST on LPC. The chipset does this by default, @@ -72,7 +65,7 @@ void bootblock_early_southbridge_init(void) { - map_rcba(); + pch_enable_bars(); enable_spi_prefetch(); enable_port80_on_lpc(); set_spi_speed(); @@ -83,3 +76,12 @@ pch_enable_lpc(); mainboard_config_superio(); } + +void bootblock_southbridge_init(void) +{ +#if CONFIG(INTEL_LYNXPOINT_LP) + setup_pch_lp_gpios(mainboard_gpio_map); +#else + setup_pch_gpios(mainboard_gpio_map); +#endif +} diff --git a/src/southbridge/intel/lynxpoint/early_pch.c b/src/southbridge/intel/lynxpoint/early_pch.c index b49d3cf..9cf021e 100644 --- a/src/southbridge/intel/lynxpoint/early_pch.c +++ b/src/southbridge/intel/lynxpoint/early_pch.c @@ -45,7 +45,7 @@ return id == PCH_TYPE_LPT_LP; } -static void pch_enable_bars(void) +void pch_enable_bars(void) { /* Setting up Southbridge. In the northbridge code. */ pci_write_config32(PCH_LPC_DEV, RCBA, (uintptr_t)DEFAULT_RCBA | 1); diff --git a/src/southbridge/intel/lynxpoint/pch.h b/src/southbridge/intel/lynxpoint/pch.h index 8802be1..561c5b7 100644 --- a/src/southbridge/intel/lynxpoint/pch.h +++ b/src/southbridge/intel/lynxpoint/pch.h @@ -184,6 +184,7 @@ int early_pch_init(const struct rcba_config_instruction *rcba_config); void pch_enable_lpc(void); void mainboard_config_superio(void); +void pch_enable_bars(void); #define MAINBOARD_POWER_OFF 0 #define MAINBOARD_POWER_ON 1 -- To view, visit https://review.coreboot.org/c/coreboot/+/36712 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I448ca12f5ddab362983429c508e518b7042ef760 Gerrit-Change-Number: 36712 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur@aheymans.xyz> Gerrit-Reviewer: Arthur Heymans <arthur@aheymans.xyz> Gerrit-Reviewer: Martin Roth <martinroth@google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi@google.com> Gerrit-Reviewer: Patrick Rudolph <siro@das-labor.org> Gerrit-Reviewer: Tristan Corrick <tristan@corrick.kiwi> Gerrit-MessageType: newchange