June 2019 - coreboot-gerrit - mail.coreboot.org

Change in ...coreboot[master]: drivers/apple: Add hybrid graphics driver
by Evgeny Zinoviev (Code Review) Sept. 3, 2026

Sept. 3, 2026

Evgeny Zinoviev has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32719 Change subject: drivers/apple: Add hybrid graphics driver ...................................................................... drivers/apple: Add hybrid graphics driver Hybrid graphics driver for Apple MacBook Pro. Change-Id: I22b66622cd2da0e9951ee726d650d204fbb8a5bc Signed-off-by: Evgeny Zinoviev <me(a)ch1p.io> --- A src/drivers/apple/hybrid_graphics/Kconfig A src/drivers/apple/hybrid_graphics/Makefile.inc A src/drivers/apple/hybrid_graphics/chip.h A src/drivers/apple/hybrid_graphics/gmux.c A src/drivers/apple/hybrid_graphics/gmux.h A src/drivers/apple/hybrid_graphics/hybrid_graphics.c A src/drivers/apple/hybrid_graphics/hybrid_graphics.h A src/drivers/apple/hybrid_graphics/romstage.c 8 files changed, 417 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/19/32719/1 diff --git a/src/drivers/apple/hybrid_graphics/Kconfig b/src/drivers/apple/hybrid_graphics/Kconfig new file mode 100644 index 0000000..252373f --- /dev/null +++ b/src/drivers/apple/hybrid_graphics/Kconfig @@ -0,0 +1,3 @@ +config DRIVERS_APPLE_HYBRID_GRAPHICS + bool + default n diff --git a/src/drivers/apple/hybrid_graphics/Makefile.inc b/src/drivers/apple/hybrid_graphics/Makefile.inc new file mode 100644 index 0000000..ea45b45 --- /dev/null +++ b/src/drivers/apple/hybrid_graphics/Makefile.inc @@ -0,0 +1,15 @@ +# +# This file is part of the coreboot project. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +romstage-$(CONFIG_DRIVERS_APPLE_HYBRID_GRAPHICS) += gmux.c romstage.c +ramstage-$(CONFIG_DRIVERS_APPLE_HYBRID_GRAPHICS) += gmux.c hybrid_graphics.c diff --git a/src/drivers/apple/hybrid_graphics/chip.h b/src/drivers/apple/hybrid_graphics/chip.h new file mode 100644 index 0000000..39434f8 --- /dev/null +++ b/src/drivers/apple/hybrid_graphics/chip.h @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Evgeny Zinoviev <me(a)ch1p.io> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _APPLE_HYBRID_GRAPHICS_CHIP_H_ +#define _APPLE_HYBRID_GRAPHICS_CHIP_H_ + +enum hybrid_graphics_req { + HYBRID_GRAPHICS_INTEGRATED = 0, + HYBRID_GRAPHICS_DISCRETE = 1 +}; + +#define HYBRID_GRAPHICS_DEFAULT_GPU HYBRID_GRAPHICS_INTEGRATED + +struct drivers_apple_hybrid_graphics_config { + unsigned int gmux_indexed; +}; + +#endif /* _APPLE_HYBRID_GRAPHICS_CHIP_H_ */ diff --git a/src/drivers/apple/hybrid_graphics/gmux.c b/src/drivers/apple/hybrid_graphics/gmux.c new file mode 100644 index 0000000..e1f763a --- /dev/null +++ b/src/drivers/apple/hybrid_graphics/gmux.c @@ -0,0 +1,158 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) Canonical Ltd. <seth.forshee(a)canonical.com> + * Copyright (C) 2010-2012 Andreas Heider <andreas(a)meetr.de> + * Copyright (C) 2015 Lukas Wunner <lukas(a)wunner.de> + * Copyright (C) 2019 Evgeny Zinoviev <me(a)ch1p.io> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <delay.h> +#include <arch/io.h> +#include <device/device.h> +#include "gmux.h" +#include "chip.h" + +static int gmux_index_wait_ready(void) +{ + int i = 200; + u8 gwr = inb(GMUX_IOSTART + GMUX_PORT_WRITE); + + while (i && (gwr & 0x01)) { + inb(GMUX_IOSTART + GMUX_PORT_READ); + gwr = inb(GMUX_IOSTART + GMUX_PORT_WRITE); + udelay(100); + i--; + } + + return !!i; +} + +static int gmux_index_wait_complete(void) +{ + int i = 200; + u8 gwr = inb(GMUX_IOSTART + GMUX_PORT_WRITE); + + while (i && !(gwr & 0x01)) { + gwr = inb(GMUX_IOSTART + GMUX_PORT_WRITE); + udelay(100); + i--; + } + + if (gwr & 0x01) + inb(GMUX_IOSTART + GMUX_PORT_READ); + + return !!i; +} + +u8 gmux_pio_read8(int port) +{ + return inb(GMUX_IOSTART + port); +} + +u8 gmux_index_read8(int port) +{ + u8 val; + + gmux_index_wait_ready(); + outb((port & 0xff), GMUX_IOSTART + GMUX_PORT_READ); + gmux_index_wait_complete(); + val = inb(GMUX_IOSTART + GMUX_PORT_VALUE); + + return val; +} + +void gmux_pio_write8(int port, u8 val) +{ + outb(val, GMUX_IOSTART + port); +} + + +void gmux_index_write8(int port, u8 val) +{ + outb(val, GMUX_IOSTART + GMUX_PORT_VALUE); + gmux_index_wait_ready(); + outb(port & 0xff, GMUX_IOSTART + GMUX_PORT_WRITE); + gmux_index_wait_complete(); +} + +u32 gmux_pio_read32(int port) +{ + return inl(GMUX_IOSTART + port); +} + +u32 gmux_index_read32(int port) +{ + u32 val; + + gmux_index_wait_ready(); + outb((port & 0xff), GMUX_IOSTART + GMUX_PORT_READ); + gmux_index_wait_complete(); + val = inl(GMUX_IOSTART + GMUX_PORT_VALUE); + + return val; +} + +u8 gmux_read8(const struct device *dev, int port) +{ + const struct drivers_apple_hybrid_graphics_config *config = dev->chip_info; + if (config->gmux_indexed) { + return gmux_index_read8(port); + } else { + return gmux_pio_read8(port); + } +} + +void gmux_write8(const struct device *dev, int port, u8 val) +{ + const struct drivers_apple_hybrid_graphics_config *config = dev->chip_info; + if (config->gmux_indexed) { + gmux_index_write8(port, val); + } else { + gmux_pio_write8(port, val); + } +} + +u32 gmux_read32(const struct device *dev, int port) +{ + const struct drivers_apple_hybrid_graphics_config *config = dev->chip_info; + if (config->gmux_indexed) { + return gmux_index_read32(port); + } else { + return gmux_pio_read32(port); + } +} + +void gmux_dgpu_power_enable(const struct device *dev, bool enable) +{ + if (enable) { + gmux_write8(dev, GMUX_PORT_DISCRETE_POWER, 1); + gmux_write8(dev, GMUX_PORT_DISCRETE_POWER, 3); + } else { + gmux_write8(dev, GMUX_PORT_DISCRETE_POWER, 1); + gmux_write8(dev, GMUX_PORT_DISCRETE_POWER, 0); + } +} + +void gmux_switch(const struct device *dev, bool dgpu) +{ + if (dgpu) { + gmux_write8(dev, GMUX_PORT_SWITCH_DDC, 2); + gmux_write8(dev, GMUX_PORT_SWITCH_DISPLAY, 3); + } else { + gmux_write8(dev, GMUX_PORT_SWITCH_DDC, 1); + gmux_write8(dev, GMUX_PORT_SWITCH_DISPLAY, 2); + } +} + + diff --git a/src/drivers/apple/hybrid_graphics/gmux.h b/src/drivers/apple/hybrid_graphics/gmux.h new file mode 100644 index 0000000..18f6722 --- /dev/null +++ b/src/drivers/apple/hybrid_graphics/gmux.h @@ -0,0 +1,60 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) Canonical Ltd. <seth.forshee(a)canonical.com> + * Copyright (C) 2010-2012 Andreas Heider <andreas(a)meetr.de> + * Copyright (C) 2015 Lukas Wunner <lukas(a)wunner.de> + * Copyright (C) 2019 Evgeny Zinoviev <me(a)ch1p.io> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef EC_APPLE_GMUX_H +#define EC_APPLE_GMUX_H + +#define GMUX_PORT_VERSION_MAJOR 0x04 +#define GMUX_PORT_VERSION_MINOR 0x05 +#define GMUX_PORT_VERSION_RELEASE 0x06 + +#define GMUX_PORT_SWITCH_DISPLAY 0x10 +#define GMUX_PORT_SWITCH_DDC 0x28 +#define GMUX_PORT_DISCRETE_POWER 0x50 +#define GMUX_PORT_MAX_BRIGHTNESS 0x70 +#define GMUX_PORT_BRIGHTNESS 0x74 +#define GMUX_PORT_VALUE 0xc2 +#define GMUX_PORT_READ 0xd0 +#define GMUX_PORT_WRITE 0xd4 + +#define GMUX_PORT_INTERRUPT_ENABLE 0x14 +#define GMUX_INTERRUPT_ENABLE 0xff +#define GMUX_INTERRUPT_DISABLE 0x00 + +#define GMUX_BRIGHTNESS_MASK 0x00ffffff +#define GMUX_MAX_BRIGHTNESS GMUX_BRIGHTNESS_MASK + +#define GMUX_IOSTART 0x700 + +u8 gmux_index_read8(int port); +u8 gmux_pio_read8(int port); +u8 gmux_read8(const struct device *dev, int port); + +void gmux_index_write8(int port, u8 val); +void gmux_pio_write8(int port, u8 val); +void gmux_write8(const struct device *dev, int port, u8 val); + +u32 gmux_index_read32(int port); +u32 gmux_pio_read32(int port); +u32 gmux_read32(const struct device *dev, int port); + +void gmux_switch(const struct device *dev, bool dgpu); +void gmux_dgpu_power_enable(const struct device *dev, bool enable); + +#endif /* EC_APPLE_GMUX_H */ diff --git a/src/drivers/apple/hybrid_graphics/hybrid_graphics.c b/src/drivers/apple/hybrid_graphics/hybrid_graphics.c new file mode 100644 index 0000000..804eb76 --- /dev/null +++ b/src/drivers/apple/hybrid_graphics/hybrid_graphics.c @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Evgeny Zinoviev <me(a)ch1p.io> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <types.h> +#include <option.h> +#include <device/device.h> + +#include <southbridge/intel/common/gpio.h> +#include <console/console.h> +#include "chip.h" +#include "gmux.h" + +static void enable_dev(struct device *dev) +{ + printk(BIOS_INFO, "Hybrid graphics enable_dev\n"); + + const struct drivers_lenovo_hybrid_graphics_config *config; + enum hybrid_graphics_req mode; + u8 ver_major, ver_minor, ver_release; + u32 version, max_brightness, brightness; + + /* Don't confuse anyone else and disable the fake device */ + dev->enabled = 0; + + config = dev->chip_info; + if (!config) { + printk(BIOS_INFO, "Hybrid graphics: Not installed\n"); + return; + } + + version = gmux_index_read32(GMUX_PORT_VERSION_MAJOR); + ver_major = (version >> 24) & 0xff; + ver_minor = (version >> 16) & 0xff; + ver_release = (version >> 8) & 0xff; + max_brightness = gmux_index_read32(GMUX_PORT_MAX_BRIGHTNESS); + brightness = gmux_index_read32(GMUX_PORT_BRIGHTNESS) & GMUX_BRIGHTNESS_MASK; + + printk(BIOS_INFO, "gmux version: %d.%d.%d\n", + ver_major, ver_minor, ver_release); + printk(BIOS_INFO, "gmux max brightness: %d\n", max_brightness); + printk(BIOS_INFO, "gmux brightness: %d\n", brightness); + + mode = HYBRID_GRAPHICS_DEFAULT_GPU; + get_option(&mode, "hybrid_graphics_mode"); + + gmux_switch(dev, mode == HYBRID_GRAPHICS_DISCRETE); +} + +struct chip_operations drivers_apple_hybrid_graphics_ops = { + CHIP_NAME("Apple hybrid graphics driver") + .enable_dev = enable_dev +}; diff --git a/src/drivers/apple/hybrid_graphics/hybrid_graphics.h b/src/drivers/apple/hybrid_graphics/hybrid_graphics.h new file mode 100644 index 0000000..782be44 --- /dev/null +++ b/src/drivers/apple/hybrid_graphics/hybrid_graphics.h @@ -0,0 +1,24 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Evgeny Zinoviev <me(a)ch1p.io> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DRIVERS_APPLE_HYBRID_GRAPHICS_H_ +#define _DRIVERS_APPLE_HYBRID_GRAPHICS_H_ + +#define HYBRID_GRAPHICS_PORT 0xff +#define HYBRID_GRAPHICS_DEVICE 0xf + +void early_hybrid_graphics(bool *enable_igd, bool *enable_peg); + +#endif /* _DRIVERS_APPLE_HYBRID_GRAPHICS_CHIP_H_ */ diff --git a/src/drivers/apple/hybrid_graphics/romstage.c b/src/drivers/apple/hybrid_graphics/romstage.c new file mode 100644 index 0000000..9cd5098 --- /dev/null +++ b/src/drivers/apple/hybrid_graphics/romstage.c @@ -0,0 +1,63 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Patrick Rudolph <siro(a)das-labor.org> + * Copyright (C) 2019 Evgeny Zinoviev <me(a)ch1p.io> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <types.h> +#include <option.h> +#include <device/device.h> +#include <console/console.h> +#include "hybrid_graphics.h" +#include "chip.h" +#include "gmux.h" + +void early_hybrid_graphics(bool *enable_igd, bool *enable_peg) +{ + const struct drivers_apple_hybrid_graphics_config *config; + const struct device *dev; + + enum hybrid_graphics_req mode = HYBRID_GRAPHICS_DEFAULT_GPU; + + printk(BIOS_INFO, "Hybrid graphics early_hybrid_graphics\n"); + + /* TODO: Use generic device instead of dummy PNP device */ + dev = dev_find_slot_pnp(HYBRID_GRAPHICS_PORT, HYBRID_GRAPHICS_DEVICE); + + if (!dev || !dev->chip_info) { + printk(BIOS_ERR, "Hybrid graphics: ERROR\n"); + *enable_igd = true; + *enable_peg = false; + return; + } + + config = dev->chip_info; + + get_option(&mode, "hybrid_graphics_mode"); + + if (mode == HYBRID_GRAPHICS_DISCRETE) { + printk(BIOS_DEBUG, "Hybrid graphics:" + " Disabling integrated GPU.\n"); + + *enable_igd = false; + *enable_peg = true; + } else if (mode == HYBRID_GRAPHICS_INTEGRATED) { + printk(BIOS_DEBUG, "Hybrid graphics:" + " Disabling discrete GPU.\n"); + + *enable_igd = true; + *enable_peg = false; + } + + gmux_dgpu_power_enable(dev, *enable_peg); +} -- To view, visit https://review.coreboot.org/c/coreboot/+/32719 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I22b66622cd2da0e9951ee726d650d204fbb8a5bc Gerrit-Change-Number: 32719 Gerrit-PatchSet: 1 Gerrit-Owner: Evgeny Zinoviev <me(a)ch1p.com> Gerrit-MessageType: newchange

9 34

Change in ...coreboot[master]: mb/apple: Add MacBook Pro 10,1 (A1398) support
by Evgeny Zinoviev (Code Review) Sept. 2, 2026

Sept. 2, 2026

Evgeny Zinoviev has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32673 Change subject: mb/apple: Add MacBook Pro 10,1 (A1398) support ...................................................................... mb/apple: Add MacBook Pro 10,1 (A1398) support MacBook Pro Retina 15 (Mid 2012) with Ivy Bridge CPU. This is WIP. Not for merging. Change-Id: Ica03aba442493c0d369a3d360ad569ddc16954df Signed-off-by: Evgeny Zinoviev <me(a)ch1p.io> --- M 3rdparty/vboot A src/mainboard/apple/macbookpro10_1/Kconfig A src/mainboard/apple/macbookpro10_1/Kconfig.name A src/mainboard/apple/macbookpro10_1/Makefile.inc A src/mainboard/apple/macbookpro10_1/acpi/ec.asl A src/mainboard/apple/macbookpro10_1/acpi/platform.asl A src/mainboard/apple/macbookpro10_1/acpi/superio.asl A src/mainboard/apple/macbookpro10_1/acpi_tables.c A src/mainboard/apple/macbookpro10_1/board_info.txt A src/mainboard/apple/macbookpro10_1/devicetree.cb A src/mainboard/apple/macbookpro10_1/dsdt.asl A src/mainboard/apple/macbookpro10_1/gma-mainboard.ads A src/mainboard/apple/macbookpro10_1/gpio.c A src/mainboard/apple/macbookpro10_1/hda_verb.c A src/mainboard/apple/macbookpro10_1/mainboard.c A src/mainboard/apple/macbookpro10_1/romstage.c 16 files changed, 758 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/73/32673/1 diff --git a/3rdparty/vboot b/3rdparty/vboot index e7edff6..304aa42 160000 --- a/3rdparty/vboot +++ b/3rdparty/vboot @@ -1 +1 @@ -Subproject commit e7edff6653e16ed915c3ad12234d133d1ef4dcc9 +Subproject commit 304aa429c1a04cda3ab2ce37b9e31af84405bfca diff --git a/src/mainboard/apple/macbookpro10_1/Kconfig b/src/mainboard/apple/macbookpro10_1/Kconfig new file mode 100644 index 0000000..603f3ee --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/Kconfig @@ -0,0 +1,46 @@ +if BOARD_APPLE_MACBOOKPRO10_1 + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_8192 + select EC_ACPI + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select INTEL_INT15 + select NORTHBRIDGE_INTEL_IVYBRIDGE + select SERIRQ_CONTINUOUS_MODE + select SOUTHBRIDGE_INTEL_C216 + select SYSTEM_TYPE_LAPTOP + select USE_NATIVE_RAMINIT + select MAINBOARD_HAS_LIBGFXINIT + select GFX_GMA_INTERNAL_IS_EDP + select SERIRQ_CONTINUOUS_MODE + +config MAINBOARD_DIR + string + default apple/macbookpro10_1 + +config MAINBOARD_PART_NUMBER + string + default "MacBookPro10,1" + +config VGA_BIOS_FILE + string + default "pci8086,0166.rom" + +config VGA_BIOS_ID + string + default "8086,0166" + +config DRAM_RESET_GATE_GPIO + int + default 28 + +config MAX_CPUS + int + default 8 + +config USBDEBUG_HCD_INDEX # FIXME: check this + int + default 2 +endif diff --git a/src/mainboard/apple/macbookpro10_1/Kconfig.name b/src/mainboard/apple/macbookpro10_1/Kconfig.name new file mode 100644 index 0000000..c257f7a --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_APPLE_MACBOOKPRO10_1 + bool "MacBookPro10,1" diff --git a/src/mainboard/apple/macbookpro10_1/Makefile.inc b/src/mainboard/apple/macbookpro10_1/Makefile.inc new file mode 100644 index 0000000..fd60338 --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/Makefile.inc @@ -0,0 +1,7 @@ +romstage-y += gpio.c + +cbfs-files-y += spd.bin +spd.bin-file := spd.bin +spd.bin-type := spd + +ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads diff --git a/src/mainboard/apple/macbookpro10_1/acpi/ec.asl b/src/mainboard/apple/macbookpro10_1/acpi/ec.asl new file mode 100644 index 0000000..f70cb3d --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/acpi/ec.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Device(EC) +{ + Name (_HID, EISAID("PNP0C09")) + Name (_UID, 0) + Name (_GPE, 23) +/* FIXME: EC support */ +} diff --git a/src/mainboard/apple/macbookpro10_1/acpi/platform.asl b/src/mainboard/apple/macbookpro10_1/acpi/platform.asl new file mode 100644 index 0000000..a17c6ea --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/acpi/platform.asl @@ -0,0 +1,23 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Method(_WAK,1) +{ + /* FIXME: EC support */ + Return(Package(){0,0}) +} + +Method(_PTS,1) +{ + /* FIXME: EC support */ +} diff --git a/src/mainboard/apple/macbookpro10_1/acpi/superio.asl b/src/mainboard/apple/macbookpro10_1/acpi/superio.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/acpi/superio.asl diff --git a/src/mainboard/apple/macbookpro10_1/acpi_tables.c b/src/mainboard/apple/macbookpro10_1/acpi_tables.c new file mode 100644 index 0000000..c48f0bd --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/acpi_tables.c @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/bd82x6x/nvs.h> + +/* FIXME: check this function. */ +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + // the lid is open by default. + gnvs->lids = 1; + + gnvs->tcrt = 100; + gnvs->tpsv = 90; +} diff --git a/src/mainboard/apple/macbookpro10_1/board_info.txt b/src/mainboard/apple/macbookpro10_1/board_info.txt new file mode 100644 index 0000000..81a5134 --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/board_info.txt @@ -0,0 +1,6 @@ +Category: laptop +ROM protocol: SPI +Flashrom support: n +ROM package: SOIC-8 +ROM socketed: n +Release year: 2012 diff --git a/src/mainboard/apple/macbookpro10_1/devicetree.cb b/src/mainboard/apple/macbookpro10_1/devicetree.cb new file mode 100644 index 0000000..f9e7eb4 --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/devicetree.cb @@ -0,0 +1,124 @@ +chip northbridge/intel/sandybridge # FIXME: check gfx.ndid and gfx.did + #register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410 }" + register "gfx.did" = "{ 0x80000410, 0x80000320, 0x80000410, 0x80000410, 0x00000005 }" + register "gfx.link_frequency_270_mhz" = "0" + register "gfx.ndid" = "3" + register "gfx.use_spread_spectrum_clock" = "1" + register "gpu_cpu_backlight" = "0xffffffff" + register "gpu_dp_b_hotplug" = "7" + register "gpu_dp_c_hotplug" = "7" + register "gpu_dp_d_hotplug" = "7" + register "gpu_panel_port_select" = "3" + register "gpu_panel_power_backlight_off_delay" = "8191" + register "gpu_panel_power_backlight_on_delay" = "8191" + register "gpu_panel_power_cycle_delay" = "255" + register "gpu_panel_power_down_delay" = "8191" + register "gpu_panel_power_up_delay" = "8191" + register "gpu_pch_backlight" = "0xffffffff" + device cpu_cluster 0x0 on + chip cpu/intel/model_206ax # FIXME: check all registers + register "c1_acpower" = "1" + register "c1_battery" = "1" + register "c2_acpower" = "3" + register "c2_battery" = "3" + register "c3_acpower" = "5" + register "c3_battery" = "5" + device lapic 0x0 on + end + device lapic 0xacac off + end + end + end + device domain 0x0 on + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "c2_latency" = "0x0065" + register "docking_supported" = "0" + register "gen1_dec" = "0x000c0681" + register "gen2_dec" = "0x000c1641" + register "gen3_dec" = "0x001c0301" + register "gen4_dec" = "0x00fc0701" + register "gpi7_routing" = "2" + register "p_cnt_throttling_supported" = "1" + register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }" + register "pcie_port_coalesce" = "1" + register "sata_interface_speed_support" = "0x3" + register "sata_port_map" = "0x1" + register "spi_lvscc" = "0x0" + register "spi_uvscc" = "0x2005" + register "superspeed_capable_ports" = "0x0000000f" + register "xhci_overcurrent_mapping" = "0x08040201" + register "xhci_switchable_ports" = "0x0000000f" + device pci 14.0 on # USB 3.0 Controller + subsystemid 0x8086 0x7270 + end + device pci 16.0 on # Management Engine Interface 1 + subsystemid 0x8086 0x7270 + end + device pci 16.1 off # Management Engine Interface 2 + end + device pci 16.2 off # Management Engine IDE-R + end + device pci 16.3 off # Management Engine KT + end + device pci 19.0 off # Intel Gigabit Ethernet + end + device pci 1a.0 on # USB2 EHCI #2 + subsystemid 0x8086 0x7270 + end + device pci 1b.0 on # High Definition Audio Audio controller + subsystemid 0x8086 0x7270 + end + device pci 1c.0 on # PCIe Port #1 + subsystemid 0x8086 0x7270 + end + device pci 1c.1 on # PCIe Port #2 + subsystemid 0x8086 0x7270 + end + device pci 1c.2 off # PCIe Port #3 + end + device pci 1c.3 off # PCIe Port #4 + end + device pci 1c.4 off # PCIe Port #5 + end + device pci 1c.5 off # PCIe Port #6 + end + device pci 1c.6 off # PCIe Port #7 + end + device pci 1c.7 off # PCIe Port #8 + end + device pci 1d.0 on # USB2 EHCI #1 + subsystemid 0x8086 0x7270 + end + device pci 1e.0 off # PCI bridge + end + device pci 1f.0 on # LPC bridge PCI-LPC bridge + subsystemid 0x8086 0x7270 + end + device pci 1f.2 on # SATA Controller 1 + subsystemid 0x8086 0x7270 + end + device pci 1f.3 on # SMBus + subsystemid 0x8086 0x7270 + end + device pci 1f.5 off # SATA Controller 2 + end + device pci 1f.6 off # Thermal + end + end + device pci 00.0 on # Host bridge Host bridge + subsystemid 0x106b 0x00f7 + end + device pci 01.0 on # PCIe Bridge for discrete graphics + subsystemid 0x106b 0x00f7 + end + device pci 02.0 on # Internal graphics VGA controller + subsystemid 0x106b 0x00f7 + end + device pci 01.2 on + subsystemid 0x106b 0x00f7 + end + device pci 01.1 on + subsystemid 0x106b 0x00f7 + end + end +end diff --git a/src/mainboard/apple/macbookpro10_1/dsdt.asl b/src/mainboard/apple/macbookpro10_1/dsdt.asl new file mode 100644 index 0000000..455ac17 --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/dsdt.asl @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define BRIGHTNESS_UP \_SB.PCI0.GFX0.INCB +#define BRIGHTNESS_DOWN \_SB.PCI0.GFX0.DECB +#define ACPI_VIDEO_DEVICE \_SB.PCI0.GFX0 + +#include <arch/acpi.h> +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI 2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20141018 // OEM revision +) +{ + /* Some generic macros */ + #include "acpi/platform.asl" + #include <cpu/intel/common/acpi/cpu.asl> + #include <southbridge/intel/bd82x6x/acpi/platform.asl> + /* global NVS and variables. */ + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> + + Device (\_SB.PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <drivers/intel/gma/acpi/default_brightness_levels.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } +} diff --git a/src/mainboard/apple/macbookpro10_1/gma-mainboard.ads b/src/mainboard/apple/macbookpro10_1/gma-mainboard.ads new file mode 100644 index 0000000..d4a5d7d --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/gma-mainboard.ads @@ -0,0 +1,34 @@ +-- +-- This file is part of the coreboot project. +-- +-- This program is free software; you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation; either version 2 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- + +with HW.GFX.GMA; +with HW.GFX.GMA.Display_Probing; + +use HW.GFX.GMA; +use HW.GFX.GMA.Display_Probing; + +private package GMA.Mainboard is + + ports : constant Port_List := + (DP1, + DP2, + DP3, + HDMI1, + HDMI2, + HDMI3, + Analog, + Internal, + others => Disabled); + +end GMA.Mainboard; diff --git a/src/mainboard/apple/macbookpro10_1/gpio.c b/src/mainboard/apple/macbookpro10_1/gpio.c new file mode 100644 index 0000000..a445687 --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/gpio.c @@ -0,0 +1,243 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_GPIO, + .gpio11 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_GPIO, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_GPIO, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_OUTPUT, + .gpio16 = GPIO_DIR_OUTPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_OUTPUT, + .gpio21 = GPIO_DIR_OUTPUT, + .gpio22 = GPIO_DIR_OUTPUT, + .gpio23 = GPIO_DIR_OUTPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio26 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio8 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_LOW, + .gpio15 = GPIO_LEVEL_HIGH, + .gpio16 = GPIO_LEVEL_LOW, + .gpio19 = GPIO_LEVEL_HIGH, + .gpio21 = GPIO_LEVEL_LOW, + .gpio22 = GPIO_LEVEL_LOW, + .gpio23 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { + .gpio11 = GPIO_RESET_RSMRST, + .gpio15 = GPIO_RESET_RSMRST, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio1 = GPIO_INVERT, + .gpio2 = GPIO_INVERT, + .gpio4 = GPIO_INVERT, + .gpio5 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, + .gpio14 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_NATIVE, + .gpio47 = GPIO_MODE_GPIO, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_GPIO, + .gpio51 = GPIO_MODE_GPIO, + .gpio52 = GPIO_MODE_GPIO, + .gpio53 = GPIO_MODE_GPIO, + .gpio54 = GPIO_MODE_GPIO, + .gpio55 = GPIO_MODE_GPIO, + .gpio56 = GPIO_MODE_GPIO, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_GPIO, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio33 = GPIO_DIR_INPUT, + .gpio34 = GPIO_DIR_OUTPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio36 = GPIO_DIR_OUTPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio47 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_OUTPUT, + .gpio49 = GPIO_DIR_OUTPUT, + .gpio50 = GPIO_DIR_INPUT, + .gpio51 = GPIO_DIR_OUTPUT, + .gpio52 = GPIO_DIR_OUTPUT, + .gpio53 = GPIO_DIR_OUTPUT, + .gpio54 = GPIO_DIR_OUTPUT, + .gpio55 = GPIO_DIR_OUTPUT, + .gpio56 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio60 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio34 = GPIO_LEVEL_HIGH, + .gpio35 = GPIO_LEVEL_LOW, + .gpio36 = GPIO_LEVEL_LOW, + .gpio48 = GPIO_LEVEL_HIGH, + .gpio49 = GPIO_LEVEL_HIGH, + .gpio51 = GPIO_LEVEL_HIGH, + .gpio52 = GPIO_LEVEL_LOW, + .gpio53 = GPIO_LEVEL_HIGH, + .gpio54 = GPIO_LEVEL_LOW, + .gpio55 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_GPIO, + .gpio65 = GPIO_MODE_GPIO, + .gpio66 = GPIO_MODE_GPIO, + .gpio67 = GPIO_MODE_GPIO, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_GPIO, + .gpio71 = GPIO_MODE_GPIO, + .gpio72 = GPIO_MODE_NATIVE, + .gpio73 = GPIO_MODE_GPIO, + .gpio74 = GPIO_MODE_GPIO, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio64 = GPIO_DIR_OUTPUT, + .gpio65 = GPIO_DIR_OUTPUT, + .gpio66 = GPIO_DIR_OUTPUT, + .gpio67 = GPIO_DIR_OUTPUT, + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio70 = GPIO_DIR_INPUT, + .gpio71 = GPIO_DIR_INPUT, + .gpio73 = GPIO_DIR_INPUT, + .gpio74 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio64 = GPIO_LEVEL_LOW, + .gpio65 = GPIO_LEVEL_LOW, + .gpio66 = GPIO_LEVEL_LOW, + .gpio67 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/apple/macbookpro10_1/hda_verb.c b/src/mainboard/apple/macbookpro10_1/hda_verb.c new file mode 100644 index 0000000..b8e4855 --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/hda_verb.c @@ -0,0 +1,58 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + 0x10134206, /* Codec Vendor / Device ID: Cirrus */ + 0x106b2800, /* Subsystem ID */ + + 0x0000000b, /* Number of 4 dword sets */ + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x0, 0x106b2800), + + /* NID 0x09. */ + AZALIA_PIN_CFG(0x0, 0x09, 0x002b4020), + + /* NID 0x0a. */ + AZALIA_PIN_CFG(0x0, 0x0a, 0x90100112), + + /* NID 0x0b. */ + AZALIA_PIN_CFG(0x0, 0x0b, 0x90100110), + + /* NID 0x0c. */ + AZALIA_PIN_CFG(0x0, 0x0c, 0x400000f0), + + /* NID 0x0d. */ + AZALIA_PIN_CFG(0x0, 0x0d, 0x400000f0), + + /* NID 0x0e. */ + AZALIA_PIN_CFG(0x0, 0x0e, 0x90a60100), + + /* NID 0x0f. */ + AZALIA_PIN_CFG(0x0, 0x0f, 0x400000f0), + + /* NID 0x10. */ + AZALIA_PIN_CFG(0x0, 0x10, 0x004be030), + + /* NID 0x12. */ + AZALIA_PIN_CFG(0x0, 0x12, 0x400000f0), + + /* NID 0x15. */ + AZALIA_PIN_CFG(0x0, 0x15, 0x400000f0), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/apple/macbookpro10_1/mainboard.c b/src/mainboard/apple/macbookpro10_1/mainboard.c new file mode 100644 index 0000000..3910541 --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/mainboard.c @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/device.h> +#include <drivers/intel/gma/int15.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <ec/acpi/ec.h> +#include <console/console.h> + +static void mainboard_init(struct device *dev) +{ + +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->init = mainboard_init; + + /* FIXME: fix those values*/ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, + GMA_INT15_PANEL_FIT_DEFAULT, + GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/apple/macbookpro10_1/romstage.c b/src/mainboard/apple/macbookpro10_1/romstage.c new file mode 100644 index 0000000..c35604b --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/romstage.c @@ -0,0 +1,82 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* FIXME: Check if all includes are needed. */ + +#include <stdint.h> +#include <string.h> +#include <timestamp.h> +#include <arch/byteorder.h> +#include <arch/io.h> +#include <device/mmio.h> +#include <device/pci_ops.h> +#include <device/pnp_ops.h> +#include <console/console.h> +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <northbridge/intel/sandybridge/raminit_native.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/common/gpio.h> +#include <cbfs.h> + +void pch_enable_lpc(void) +{ + pci_write_config16(PCH_LPC_DEV, 0x82, 0x3f0f); + pci_write_config32(PCH_LPC_DEV, 0x84, 0x000c0681); + pci_write_config32(PCH_LPC_DEV, 0x88, 0x000c1641); + pci_write_config32(PCH_LPC_DEV, 0x8c, 0x001c0301); + pci_write_config32(PCH_LPC_DEV, 0x90, 0x00fc0701); + pci_write_config16(PCH_LPC_DEV, 0x80, 0x0070); +} + +void mainboard_rcba_config(void) +{ +} + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 0, 0 }, + { 1, 0, 1 }, + { 1, 0, 2 }, + { 1, 0, 3 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, +}; + +void mainboard_early_init(int s3resume) +{ +} + +void mainboard_config_superio(void) +{ +} + +// FIXME +void mainboard_get_spd(spd_raw_data *spd, bool id_only) +{ + void *spd_file; + size_t spd_file_len = 0; + spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD, + &spd_file_len); + if (spd_file && spd_file_len >= 128) { + memcpy(&spd[0], spd_file, 128); + memcpy(&spd[2], spd_file, 128); + } +} -- To view, visit https://review.coreboot.org/c/coreboot/+/32673 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ica03aba442493c0d369a3d360ad569ddc16954df Gerrit-Change-Number: 32673 Gerrit-PatchSet: 1 Gerrit-Owner: Evgeny Zinoviev <me(a)ch1p.com> Gerrit-MessageType: newchange

12 81

Change in ...coreboot[master]: Documentation: Update CBFS
by Patrick Rudolph (Code Review) Aug. 7, 2026

Aug. 7, 2026

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/33664 Change subject: Documentation: Update CBFS ...................................................................... Documentation: Update CBFS Update some parts to match current implementation. Change-Id: I84d07ae1c5c1ded2b9ab5934e2babbbabb749440 --- M Documentation/lib/cbfs.md M Documentation/lib/payloads/selfboot.md 2 files changed, 46 insertions(+), 34 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/64/33664/1 diff --git a/Documentation/lib/cbfs.md b/Documentation/lib/cbfs.md index 83d8b44..ce87b78 100644 --- a/Documentation/lib/cbfs.md +++ b/Documentation/lib/cbfs.md @@ -7,7 +7,7 @@ ## Introduction -This document describes the coreboot CBFS specification (from here +This document describes the coreboot filesystem specification (from here referred to as CBFS). CBFS is a scheme for managing independent chunks of data in a system ROM. Though not a true filesystem, the style and concepts are similar. @@ -15,7 +15,7 @@ ## Architecture -The CBFS architecture looks like the following: +The CBFS on x86 architecture looks like the following: ``` /---------------\ <-- Start of ROM @@ -49,11 +49,11 @@ The CBFS architecture consists of a binary associated with a physical ROM disk referred hereafter as the ROM. A number of independent of -components, each with a header prepended on to data are located within -the ROM. The components are nominally arranged sequentially, though they +components, each with a header prepended on to data are located within +the ROM. The components are nominally arranged sequentially, though they are aligned along a pre-defined boundary. -The bootblock occupies the last 20k of the ROM. Within +On x86 legacy the bootblock occupies the last 20k of the ROM. Within the bootblock is a master header containing information about the ROM including the size, alignment of the components, and the offset of the start of the first CBFS component within the ROM. @@ -62,14 +62,13 @@ The master header contains essential information about the ROM that is used by both the CBFS implementation within coreboot at runtime as well -as host based utilities to create and manage the ROM. The master header -will be located somewhere within the bootblock (last 20k of the ROM). A -pointer to the location of the header will be located at offset --4 from the end of the ROM. This translates to address 0xFFFFFFFC on a -normal x86 system. The pointer will be to physical memory somewhere -between - 0xFFFFB000 and 0xFFFFFFF0. This makes it easier for coreboot -to locate the header at run time. Build time utilities will -need to read the pointer and do the appropriate math to locate the header. +as host based utilities to create and manage the ROM. The master header +will be located at the start of CBFS. A pointer to the location of the +header will be located at offset -4 from the end of the ROM. +This translates to address 0xFFFFFFFC on a normal x86 system. +This makes it easier for coreboot to locate the header at run time. +Build time utilities will need to read the pointer and do the appropriate +math to locate the header. The following is the structure of the master header: @@ -114,16 +113,16 @@ for. ## Bootblock -The bootblock is a mandatory component in the ROM. It is located in the -last 20k of the ROM space, and contains, among other things, the location of the -master header and the entry point for the loader firmware. The bootblock -does not have a component header attached to it. +The bootblock is a mandatory component in the ROM. On x86 legacy it is located +at the end of the CBFS, and contains, among other things, the location of the +master header and the entry point for the loader firmware. On other +architectures the bootblock might not be part of the CBFS. ## Components CBFS components are placed in the ROM starting at 'offset' specified in -the master header and ending at the bootblock. Thus the total size -available for components in the ROM is (ROM size - 20k - 'offset'). +the master header and ending at the end of the CBFS. Thus the total size +available for components in the ROM is (ROM size - 'offset'). Each CBFS component is to be aligned according to the 'align' value in the header. Thus, if a component of size 1052 is located at offset 0 with an 'align' @@ -208,10 +207,10 @@ #### Stages -Stages are code loaded by coreboot during the boot process. They are -essential to a successful boot. Stages are comprised of a single blob +Stages are code loaded by coreboot during the boot process. They are +essential to a successful boot. Stages are comprised of a single blob of binary data that is to be loaded into a particular location in memory -and executed. The uncompressed header contains information about how +and executed. The uncompressed header contains information about how large the data is, and where it should be placed, and what additional memory needs to be cleared. @@ -244,8 +243,8 @@ `compression` is an integer defining how the data is compressed. There are three compression types defined by this version of the standard: -none (0x0), lzma (0x1), and nrv2b (0x02, deprecated), though additional -types may be added assuming that coreboot understands how to handle the scheme. +none (0x0), lzma (0x1), and lz4 (0x02), though additional types may be +added assuming that coreboot understands how to handle the scheme. `entry` is a 64 bit value indicating the location where the program counter should jump following the loading of the stage. This should be @@ -271,13 +270,13 @@ #### Payloads Payloads are loaded by coreboot following the boot process. +The default payloads supported by coreboot are [SELF] payloads. -Stages are assigned a component value of 0x20. When coreboot sees this +[SELF] stages are assigned a component value of 0x20. When coreboot sees this component type, it knows that it should pass the data to a sub-function -that will process the payload. Furthermore, other run time applications such -as 'bayou' may easily index all available payloads -on the system by searching for the payload type. - +that will process the payload. Furthermore, other run time applications such +as 'bayou' may easily index all available payloads on the system by searching +for the payload type. The following is the format of a stage component: @@ -338,9 +337,9 @@ `compression` is the compression scheme for the segment. Each segment can be independently compressed. There are three compression types defined by -this version of the standard: none (0x0), lzma (0x1), and nrv2b -(0x02, deprecated), though additional types may be added assuming that -coreboot understands how to handle the scheme. +this version of the standard: none (0x0), lzma (0x1), and lz4 (0x02), though +additional types may be added assuming that coreboot understands how to handle +the scheme. `offset` is the address of the data within the component, starting from the component header. @@ -355,6 +354,13 @@ The data will located immediately following the last segment. +#### FIT payload + +A payload of type [FIT] is supported on some architectures. + +[FIT] stages are assigned a component value of 0x21 and do not support +compressions at all. + #### Option ROMS The third specified component type will be Option ROMs. Option ROMS will @@ -364,8 +370,11 @@ #### NULL -There is a 4th component type ,defined as NULL (0xFFFFFFFF). This is -the "don't care" component type. This can be used when the component +There is a 4th component type, defined as NULL (0xFFFFFFFF, 0x00000000). +This is the "don't care" component type. This can be used when the component type is not necessary (such as when the name of the component is unique. i.e. option_table). It is recommended that all components be assigned a unique type, but NULL can be used when the type does not matter. + +[FIT]: payloads/fit.md +[SELF]: payloads/selfboot.md diff --git a/Documentation/lib/payloads/selfboot.md b/Documentation/lib/payloads/selfboot.md index 62a4393..791d6c0 100644 --- a/Documentation/lib/payloads/selfboot.md +++ b/Documentation/lib/payloads/selfboot.md @@ -18,6 +18,8 @@ address they specify. If it's not possible to load the payload at the specified address, the system won't boot. +Implementations details can be found in the [CBFS] documentation. + ### Calling conventions The SELF payload is called with a pointer to the coreboot tables as first argument. @@ -26,3 +28,4 @@ and a pointer to the *FDT* as arguments. [RISC-V]: ../../arch/riscv/index.md +[CBFS]: ../cbfs.md -- To view, visit https://review.coreboot.org/c/coreboot/+/33664 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I84d07ae1c5c1ded2b9ab5934e2babbbabb749440 Gerrit-Change-Number: 33664 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

4 4

Change in ...coreboot[master]: Documentation: Convert cbfs.txt to markdown
by Patrick Rudolph (Code Review) Aug. 7, 2026

Aug. 7, 2026

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/33663 Change subject: Documentation: Convert cbfs.txt to markdown ...................................................................... Documentation: Convert cbfs.txt to markdown Convert the document to markdown. Needs to be fixed in a separate commit as it doesn't reflect coreboot v4. Change-Id: I0fb2713a9cda08e528902ec641dd4a4e0dc148fe Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- A Documentation/lib/cbfs.md M Documentation/lib/index.md 2 files changed, 372 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/63/33663/1 diff --git a/Documentation/lib/cbfs.md b/Documentation/lib/cbfs.md new file mode 100644 index 0000000..83d8b44 --- /dev/null +++ b/Documentation/lib/cbfs.md @@ -0,0 +1,371 @@ +# coreboot CBFS Specification +by Jordan Crouse <jordan(a)cosmicpenguin.net> + +**WARNING: This documentation is written against coreboot v1.** + +**TODO: Update this document ASAP** + +## Introduction + +This document describes the coreboot CBFS specification (from here +referred to as CBFS). CBFS is a scheme for managing independent chunks +of data in a system ROM. Though not a true filesystem, the style and +concepts are similar. + + +## Architecture + +The CBFS architecture looks like the following: + +``` +/---------------\ <-- Start of ROM +| /-----------\ | --| +| | Header | | | +| |-----------| | | +| | Name | | |-- Component +| |-----------| | | +| |Data | | | +| |.. | | | +| \-----------/ | --| +| | +| /-----------\ | +| | Header | | +| |-----------| | +| | Name | | +| |-----------| | +| |Data | | +| |.. | | +| \-----------/ | +| | +| ... | +| /-----------\ | +| | | | +| | Bootblock | | +| | --------- | | +| | Reset | | <- 0xFFFFFFF0 +| \-----------/ | +\---------------/ +``` + +The CBFS architecture consists of a binary associated with a physical +ROM disk referred hereafter as the ROM. A number of independent of +components, each with a header prepended on to data are located within +the ROM. The components are nominally arranged sequentially, though they +are aligned along a pre-defined boundary. + +The bootblock occupies the last 20k of the ROM. Within +the bootblock is a master header containing information about the ROM +including the size, alignment of the components, and the offset of the +start of the first CBFS component within the ROM. + +## Master Header + +The master header contains essential information about the ROM that is +used by both the CBFS implementation within coreboot at runtime as well +as host based utilities to create and manage the ROM. The master header +will be located somewhere within the bootblock (last 20k of the ROM). A +pointer to the location of the header will be located at offset +-4 from the end of the ROM. This translates to address 0xFFFFFFFC on a +normal x86 system. The pointer will be to physical memory somewhere +between - 0xFFFFB000 and 0xFFFFFFF0. This makes it easier for coreboot +to locate the header at run time. Build time utilities will +need to read the pointer and do the appropriate math to locate the header. + +The following is the structure of the master header: + +```c +struct cbfs_header { + u32 magic; + u32 version; + u32 romsize; + u32 bootblocksize; + u32 align; + u32 offset; + u32 architecture; + u32 pad[1]; +} __packed; +``` + +The meaning of each member is as follows: + +`magic` is a 32 bit number that identifies the ROM as a CBFS type. The +magic +number is 0x4F524243, which is 'ORBC' in ASCII. + +`version` is a version number for CBFS header. cbfs_header structure may be +different if version is not matched. + +`romsize` is the size of the ROM in bytes. coreboot will subtract 'size' from +0xFFFFFFFF to locate the beginning of the ROM in memory. + +`bootblocksize` is the size of bootblock reserved in firmware image. + +`align` is the number of bytes that each component is aligned to within the +ROM. This is used to make sure that each component is aligned correctly +with +regards to the erase block sizes on the ROM - allowing one to replace a +component at runtime without disturbing the others. + +`offset` is the offset of the first CBFS component (from the start of +the ROM). This is to allow for arbitrary space to be left at the beginning +of the ROM for things like embedded controller firmware. + +`architecture` describes which architecture (x86, arm, ...) this CBFS is created +for. + +## Bootblock +The bootblock is a mandatory component in the ROM. It is located in the +last 20k of the ROM space, and contains, among other things, the location of the +master header and the entry point for the loader firmware. The bootblock +does not have a component header attached to it. + +## Components + +CBFS components are placed in the ROM starting at 'offset' specified in +the master header and ending at the bootblock. Thus the total size +available for components in the ROM is (ROM size - 20k - 'offset'). +Each CBFS component is to be aligned according to the 'align' value in the +header. +Thus, if a component of size 1052 is located at offset 0 with an 'align' +value of 1024, the next component will be located at offset 2048. + +Each CBFS component will be indexed with a unique ASCII string name of +unlimited size. + +Each CBFS component starts with a header: + +```c +struct cbfs_file { + char magic[8]; + unsigned int len; + unsigned int type; + unsigned int checksum; + unsigned int offset; +}; +``` + +`magic` is a magic value used to identify the header. During runtime, +coreboot will scan the ROM looking for this value. The default magic is +the string 'LARCHIVE'. + +`len` is the length of the data, not including the size of the header and +the size of the name. + +`type` is a 32 bit number indicating the type of data that is attached. +The data type is used in a number of ways, as detailed in the section +below. + +`checksum` is a 32bit checksum of the entire component, including the +header and name. + +`offset` is the start of the component data, based off the start of the +header. +The difference between the size of the header and offset is the size of the +component name. + +Immediately following the header will be the name of the component, +which will null terminated and 16 byte aligned. The following picture shows the +structure of the header: + +``` +/--------\ <- start +| Header | +|--------| <- sizeof(struct cbfs_file) +| Name | +|--------| <- 'offset' +| Data | +| ... | +\--------/ <- start + 'offset' + 'len' +``` + +### Searching Algorithm + +To locate a specific component in the ROM, one starts at the 'offset' +specified in the CBFS master header. For this example, the offset will +be 0. + +From that offset, the code should search for the magic string on the +component, jumping 'align' bytes each time. So, assuming that 'align' is +16, the code will search for the string 'LARCHIVE' at offset 0, 16, 32, etc. +If the offset ever exceeds the allowable range for CBFS components, then no +component was found. + +Upon recognizing a component, the software then has to search for the +specific name of the component. This is accomplished by comparing the +desired name with the string on the component located at +`offset + sizeof(struct cbfs_file)`. If the string matches, then the +component has been located, otherwise the software should add +`'offset' + 'len'` to the offset and resume the search for the magic value. + +### Data Types + +The 'type' member of struct cbfs_file is used to identify the content +of the component data, and is used by coreboot and other +run-time entities to make decisions about how to handle the data. + +There are three component types that are essential to coreboot, and so +are defined here. + +#### Stages + +Stages are code loaded by coreboot during the boot process. They are +essential to a successful boot. Stages are comprised of a single blob +of binary data that is to be loaded into a particular location in memory +and executed. The uncompressed header contains information about how +large the data is, and where it should be placed, and what additional memory +needs to be cleared. + +Stages are assigned a component value of 0x10. When coreboot sees this +component type, it knows that it should pass the data to a sub-function +that will process the stage. + +The following is the format of a stage component: + +``` +/--------\ +| Header | +|--------| +| Binary | +| .. | +\--------/ +``` + +The header is defined as: + +```c +struct cbfs_stage { + unsigned int compression; + unsigned long long entry; + unsigned long long load; + unsigned int len; + unsigned int memlen; +}; +``` + +`compression` is an integer defining how the data is compressed. There +are three compression types defined by this version of the standard: +none (0x0), lzma (0x1), and nrv2b (0x02, deprecated), though additional +types may be added assuming that coreboot understands how to handle the scheme. + +`entry` is a 64 bit value indicating the location where the program +counter should jump following the loading of the stage. This should be +an absolute physical memory address. + +`load` is a 64 bit value indicating where the subsequent data should be +loaded. This should be an absolute physical memory address. + +`len` is the length of the compressed data in the component. + +`memlen` is the amount of memory that will be used by the component when +it is loaded. + +The component data will start immediately following the header. + +When coreboot loads a stage, it will first zero the memory from 'load' to +'memlen'. It will then decompress the component data according to the +specified scheme and place it in memory starting at 'load'. Following that, +it will jump execution to the address specified by 'entry'. +Some components are designed to execute directly from the ROM - coreboot +knows which components must do that and will act accordingly. + +#### Payloads + +Payloads are loaded by coreboot following the boot process. + +Stages are assigned a component value of 0x20. When coreboot sees this +component type, it knows that it should pass the data to a sub-function +that will process the payload. Furthermore, other run time applications such +as 'bayou' may easily index all available payloads +on the system by searching for the payload type. + + +The following is the format of a stage component: + +``` +/-----------\ +| Header | +| Segment 1 | +| Segment 2 | +| ... | +|-----------| +| Binary | +| .. | +\-----------/ +``` + +The header is as follows: + +```c +struct cbfs_payload { + struct cbfs_payload_segment segments; +} +``` + +The header contains a number of segments corresponding to the segments +that need to be loaded for the payload. + +The following is the structure of each segment header: + +```c +struct cbfs_payload_segment { + unsigned int type; + unsigned int compression; + unsigned int offset; + unsigned long long load_addr; + unsigned int len; + unsigned int mem_len; +}; +``` + +`type` is the type of segment, one of the following: + +```eval_rst ++----------------------+-------------+---------------------------------------+ +|PAYLOAD_SEGMENT_CODE | 0x45444F43 | The segment contains executable code | ++----------------------+-------------+---------------------------------------+ +|PAYLOAD_SEGMENT_DATA | 0x41544144 | The segment contains data | ++----------------------+-------------+---------------------------------------+ +|PAYLOAD_SEGMENT_BSS | 0x20535342 | The memory specified by the segment | +| | | should be zeroed | ++----------------------+-------------+---------------------------------------+ +|PAYLOAD_SEGMENT_PARAMS| 0x41524150 | The segment contains information for | +| | | the payload | ++----------------------+-------------+---------------------------------------+ +|PAYLOAD_SEGMENT_ENTRY | 0x52544E45 | The segment contains the entry point | +| | | for the payload | ++----------------------+-------------+---------------------------------------+ +``` + +`compression` is the compression scheme for the segment. Each segment can +be independently compressed. There are three compression types defined by +this version of the standard: none (0x0), lzma (0x1), and nrv2b +(0x02, deprecated), though additional types may be added assuming that +coreboot understands how to handle the scheme. + +`offset` is the address of the data within the component, starting from +the component header. + +`load_addr` is a 64 bit value indicating where the segment should be placed +in memory. + +`len` is a 32 bit value indicating the size of the segment within the +component. + +`mem_len` is the size of the data when it is placed into memory. + +The data will located immediately following the last segment. + +#### Option ROMS + +The third specified component type will be Option ROMs. Option ROMS will +have component type '0x30'. They will have no additional header, the +uncompressed binary data will be located in the data portion of the +component. + +#### NULL + +There is a 4th component type ,defined as NULL (0xFFFFFFFF). This is +the "don't care" component type. This can be used when the component +type is not necessary (such as when the name of the component is unique. +i.e. option_table). It is recommended that all components be assigned a +unique type, but NULL can be used when the type does not matter. diff --git a/Documentation/lib/index.md b/Documentation/lib/index.md index 99b8061..808bac8 100644 --- a/Documentation/lib/index.md +++ b/Documentation/lib/index.md @@ -6,4 +6,5 @@ ## Structure and layout - [Flashmap and Flashmap Descriptor](flashmap.md) - [ABI data consumption](abi-data-consumption.md) +- [CBFS](cbfs.md) - [Timestamps](timestamp.md) -- To view, visit https://review.coreboot.org/c/coreboot/+/33663 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I0fb2713a9cda08e528902ec641dd4a4e0dc148fe Gerrit-Change-Number: 33663 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

5 5

Change in ...coreboot[master]: Documentation: Explain SimpleELF
by Patrick Rudolph (Code Review) Aug. 7, 2026

Aug. 7, 2026

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/33447 Change subject: Documentation: Explain SimpleELF ...................................................................... Documentation: Explain SimpleELF Explain coreboot's SELF format. Change-Id: Ia217af7d39505393ed9324fbe53b4ca7f3069e2e Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M Documentation/lib/payloads/index.md A Documentation/lib/payloads/selfboot.md M Documentation/payloads.md 3 files changed, 44 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/47/33447/1 diff --git a/Documentation/lib/payloads/index.md b/Documentation/lib/payloads/index.md index 44daef1..b8eca8c 100644 --- a/Documentation/lib/payloads/index.md +++ b/Documentation/lib/payloads/index.md @@ -6,6 +6,10 @@ coreboot supports multiple payloads, depending on the architecture of the selected mainboard. +## SimpleELF + +- [SimpleELF format](selfboot.md) + ## FIT - [uImage.FIT support](fit.md) diff --git a/Documentation/lib/payloads/selfboot.md b/Documentation/lib/payloads/selfboot.md new file mode 100644 index 0000000..62a4393 --- /dev/null +++ b/Documentation/lib/payloads/selfboot.md @@ -0,0 +1,28 @@ +# Simple ELF standard + +coreboot is able to use static linked ELF binaries as payload. +To reduce complexity the ELF binaries are converted to coreboot's SimpleELF +(SELF) format. +The payload is therefore split into multiple sections by `cbfstool` at +build time, each having a unique loading address and possible compression. + +## SELF loader +The SELF loader implementation can be found in `src/lib/selfboot.c`. +It decompresses the SELF sections and places them in memory. + +If the payload overlaps with the loading stage (*RAMSTAGE*) and +`CONFIG_RELOCATABLE_RAMSTAGE` is selected, the loading stage is moved to another +location in RAM. + +SELF payloads are **never** relocatable and will always be placed at the +address they specify. If it's not possible to load the payload at the specified +address, the system won't boot. + +### Calling conventions +The SELF payload is called with a pointer to the coreboot tables as first +argument. + +**Note:** The only exception is made on [RISC-V] which does use the *HARTID* +and a pointer to the *FDT* as arguments. + +[RISC-V]: ../../arch/riscv/index.md diff --git a/Documentation/payloads.md b/Documentation/payloads.md index b1eae61..650818e 100644 --- a/Documentation/payloads.md +++ b/Documentation/payloads.md @@ -7,6 +7,12 @@ There is various software in that space that is either explicitly written as payload or can be made to work as one. +## ELF + +Executable and linking format (ELF) compatible static linked binaries can be +loaded as payload. +ELF binaries are loaded through the [SELF] boot mechanism. + ## SeaBIOS [SeaBIOS](https://www.seabios.org) is an open source implementation of @@ -14,6 +20,7 @@ since. While originally written for emulators such as QEMU, it can be made to work as a coreboot payload and all the necessary code is in SeaBIOS' mainline code. +SeaBIOS is loaded through the [SELF] boot mechanism. ## Tianocore @@ -40,3 +47,8 @@ firmware project drivers that often reinvent the wheel) and the ability to define boot policy with familiar tools, no matter if those are shell scripts or compiled userland programs written in C, Go or other programming languages. + +On x86 platforms Linux is loaded through the [SELF] boot mechanism, by adding a +*tampoline code* at the start of the kernel. + +[SELF]: lib/payloads/selfboot.md -- To view, visit https://review.coreboot.org/c/coreboot/+/33447 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ia217af7d39505393ed9324fbe53b4ca7f3069e2e Gerrit-Change-Number: 33447 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

7 13

Change in ...coreboot[master]: SeaBIOS - unofficial patches: advanced_bootmenu and multiple_floppies
by mikeb mikeb (Code Review) June 12, 2025

June 12, 2025

Hello Mike Banon, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/32351 to review the following change. Change subject: SeaBIOS - unofficial patches: advanced_bootmenu and multiple_floppies ...................................................................... SeaBIOS - unofficial patches: advanced_bootmenu and multiple_floppies If you'd like to add the useful floppies to your coreboot (read about them at http://dangerousprototypes.com/docs/Lenovo_G505S_hacking#Useful_floppies ), or to use your USB numpad for choosing a SeaBIOS boot entry, then this change is for you! It contains two valuable patches together with a Makefile mod needed to automatically apply these patches to a cloned SeaBIOS before its' compilation. advanced_bootmenu: up to 35 entries (2 pages if >18), numpad support (console) https://mail.coreboot.org/hyperkitty/list/seabios@seabios.org/thread/CKWLNT… [PATCH v2] ramdisk: search for all available floppy images instead of one https://mail.coreboot.org/pipermail/seabios/2018-December/012670.html Patch descriptions are available at these links, and just in case here's a copy: advanced_bootmenu: up to 35 entries (2 pages if >18), numpad support (console) Add support for up to 35 boot menu entries (2 pages if >18). To solve the ">10" problem currently experienced by SeaBIOS users (there are no 11, 12, etc. keys on a keyboard - so impossible to choose the last menu entries if you got >10 entries because of multiple hard drives / secondary payloads / floppies) - the boot menu has been extended to the letter keys. NOTE: TPM menu has been moved from T to M letter: it is at the end of keyboard's 3rd row of letters and "Trusted" is adjective while "Module" is a noun; alternatively could press '-'. Also, add support for a numpad. Small USB numpad could be really convenient for choosing the boot entries at coreboot boards used as (maybe headless) servers. '/' char on numpad could be used to open the boot menu or to exit it. If there are >10 boot menu entries - the numpad console interface will be enabled: press one or two digit keys and then ENTER to confirm your choice, or remove a digit by pressing the '.Del' key. Also you could call TPM with '-' key at any moment, or boot with a single key press of your fullsize keyboard. [PATCH v2] ramdisk: search for all available floppy images instead of one All the floppy images available at CBFS will be found and listed in a boot menu, instead of the first found. Could be highly valuable if you are participating in a hobby OS development - would like to test multiple versions of your floppy at the same coreboot image, to reduce the amount of re-flashes and accelerate the development at bare metal - or simply you would like to access multiple floppies as a coreboot user. For example: KolibriOS (nice assembly OS with GUI and apps), FreeDOS, MichalOS, Snowdrop and memtest (coreboot's memtest version is buggy, e.g. external USB keyboard isn't working at some laptops; floppy is much better) Signed-off-by: Mike Banon <mikebdp2(a)gmail.com> Change-Id: Idf4efba31091a8678b51c2f6541d440c5cc6d37d --- M payloads/external/SeaBIOS/Makefile A payloads/external/SeaBIOS/advanced_bootmenu.patch A payloads/external/SeaBIOS/multiple_floppies.patch 3 files changed, 551 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/51/32351/1 diff --git a/payloads/external/SeaBIOS/Makefile b/payloads/external/SeaBIOS/Makefile index e505c8c..ae58c8c 100644 --- a/payloads/external/SeaBIOS/Makefile +++ b/payloads/external/SeaBIOS/Makefile @@ -76,7 +76,18 @@ # echo "# CONFIG_SMBIOS is not set" >> seabios/.config $(MAKE) -C seabios olddefconfig OUT=out/ -build: config +patch: + if [ -d seabios ]; then \ + cd seabios; \ + if [ ! -f .patched ]; then \ + echo " PATCH SeaBIOS $(TAG-y)"; \ + patch -p1 < ./../advanced_bootmenu.patch; \ + patch -p1 < ./../multiple_floppies.patch; \ + touch .patched; \ + fi; \ + fi + +build: config patch echo " MAKE SeaBIOS $(TAG-y)" $(MAKE) -C seabios OUT=out/ diff --git a/payloads/external/SeaBIOS/advanced_bootmenu.patch b/payloads/external/SeaBIOS/advanced_bootmenu.patch new file mode 100644 index 0000000..c914588 --- /dev/null +++ b/payloads/external/SeaBIOS/advanced_bootmenu.patch @@ -0,0 +1,332 @@ +diff --git a/src/boot.c b/src/boot.c +index 9f82f3c..f94dd27 100644 +--- a/src/boot.c ++++ b/src/boot.c +@@ -463,6 +463,7 @@ get_keystroke(int msec) + * Boot menu and BCV execution + ****************************************************************/ + ++#define BOOTMENU_PAGE_SIZE 18 + #define DEFAULT_BOOTMENU_WAIT 2500 + + // Show IPL option menu. +@@ -478,59 +479,282 @@ interactive_bootmenu(void) + ; + + char *bootmsg = romfile_loadfile("etc/boot-menu-message", NULL); +- int menukey = romfile_loadint("etc/boot-menu-key", 1); +- printf("%s", bootmsg ?: "\nPress ESC for boot menu.\n\n"); ++ int menukey = romfile_loadint("etc/boot-menu-key", 1); // custom menukey ++ printf("%s", bootmsg ?: "\nPress ESC or \\ / slash for boot menu.\n\n"); + free(bootmsg); + + u32 menutime = romfile_loadint("etc/boot-menu-wait", DEFAULT_BOOTMENU_WAIT); + enable_bootsplash(); + int scan_code = get_keystroke(menutime); + disable_bootsplash(); +- if (scan_code != menukey) ++ if (scan_code != menukey && // custom menukey ++ scan_code != 1 && // ESC ++ scan_code != 43 && // '\' char on keyboard ++ scan_code != 53 && // '/' char on keyboard ++ scan_code != 98) { // '/' char on numpad ++ if (scan_code == -1) ++ printf("No key pressed.\n"); ++ else ++ printf("Not a menukey pressed.\n"); + return; ++ } + + while (get_keystroke(0) >= 0) + ; + +- printf("Select boot device:\n\n"); + wait_threads(); + +- // Show menu items ++ char keyboard_keys[35] = {'1','2','3','4','5','6','7','8','9','0', ++ 'q','w','e','r','t','y','u','i','o','p', ++ 'a','s','d','f','g','h','j','k','l', ++ 'z','x','c','v','b','n'}; /* m = TPM */ ++ int numpad_scancodes[10] = { 82, 79, 80, 81, 75, 76, 77, 71, 72, 73 }; ++ int numpi = 0; // Key index: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9. ++ int digits = 0; // Numerical length of a current choice number. ++ int decode = 0; // Decode the current choice number into a letter? ++ int entry_id = 0; ++ char desc[77]; ++ ++ printf("Select boot device"); ++ ++ // Show menu items after counting them and determining a number of pages. ++ // Only 35 boot menu items (36 if to count a TPM) are supported currently. ++ + int maxmenu = 0; + struct bootentry_s *pos; +- hlist_for_each_entry(pos, &BootList, node) { +- char desc[77]; ++ hlist_for_each_entry(pos, &BootList, node) + maxmenu++; +- printf("%d. %s\n", maxmenu ++ ++ if (maxmenu > 10) { ++ if (maxmenu > 35) ++ maxmenu = 35; ++ if (maxmenu > BOOTMENU_PAGE_SIZE) ++ printf(" - page 1 :"); ++ else ++ printf(": "); ++ printf(" // press ENTER after your numpad input"); ++ if (maxmenu > BOOTMENU_PAGE_SIZE) ++ printf(" - if any -\n " ++ " // - or to switch between the pages...\n"); ++ else ++ printf(" (if any)\n\n"); ++ } else { ++ printf(":\n\n"); ++ } ++ ++ hlist_for_each_entry(pos, &BootList, node) { ++ if (entry_id == BOOTMENU_PAGE_SIZE) // Show only the first page. ++ break; ++ printf("%c. %s\n", keyboard_keys[entry_id] + , strtcpy(desc, pos->description, ARRAY_SIZE(desc))); ++ entry_id++; + } ++ int tpm_cshm = 0; + if (tpm_can_show_menu()) { +- printf("\nt. TPM Configuration\n"); ++ tpm_cshm = 1; ++ printf("\nm-. TPM Configuration"); + } +- +- // Get key press. If the menu key is ESC, do not restart boot unless +- // 1.5 seconds have passed. Otherwise users (trained by years of +- // repeatedly hitting keys to enter the BIOS) will end up hitting ESC +- // multiple times and immediately booting the primary boot device. +- int esc_accepted_time = irqtimer_calc(menukey == 1 ? 1500 : 0); ++ printf("\n> "); ++ ++ // Do not restart boot on menukey press, unless DEFAULT_BOOTMENU_WAIT msecs ++ // have passed. Otherwise users (trained by years of repeatedly hitting keys ++ // to enter the BIOS) will end up hitting menukey multiple times and ++ // immediately booting the primary boot device. ++ int esc_accepted_time = irqtimer_calc(DEFAULT_BOOTMENU_WAIT); ++ int choice = 0, kb_choice = 0; ++ int page_num = 1; ++ int enter = 0; ++ int backspace = 0; ++ int tpm_show_menu = 0; + for (;;) { + scan_code = get_keystroke(1000); +- if (scan_code == 1 && !irqtimer_check(esc_accepted_time)) +- continue; +- if (tpm_can_show_menu() && scan_code == 20 /* t */) { ++ if (scan_code == menukey || // custom menukey ++ scan_code == 1 || // ESC ++ scan_code == 43 || // '\' char on keyboard ++ scan_code == 53 || // '/' char on keyboard ++ scan_code == 98) { // '/' char on numpad ++ if (!irqtimer_check(esc_accepted_time)) ++ continue; ++ if (digits == 2) // Remove the decoded "(*)" ++ printf(" \b\b\b"); ++ /* Remove the existing input before printing a message. */ ++ for (; digits > 0; digits--) ++ printf("\b \b"); ++ printf("Menukey pressed.\n"); ++ return; ++ } ++ kb_choice = 0; ++ /* 4 rows of keyboard_keys: 1 row with numbers, 3 rows with letters. ++ Use any of them to select a boot device (except the TPM 'm-' keys) */ ++ // 1st range: 1-9 and 0 (10) keys <==> 2-11 scan codes <==> 1-10 choice ++ if (scan_code >= 2 && scan_code <= 11) kb_choice = scan_code - 1; ++ // 2nd range: Q-P row of letters <==> 16-25 scan codes <==> 11-20 choice ++ if (scan_code >= 16 && scan_code <= 25) kb_choice = scan_code - 5; ++ // 3rd range: A-L row of letters <==> 30-38 scan codes <==> 21-29 choice ++ if (scan_code >= 30 && scan_code <= 38) kb_choice = scan_code - 9; ++ // 4th range: Z-N row of letters <==> 44-49 scan codes <==> 30-35 choice ++ if (scan_code >= 44 && scan_code <= 49) kb_choice = scan_code - 14; ++ // ENTER: (28) on keyboard, (96) on numpad. ++ if (scan_code == 28 || scan_code == 96) ++ enter = 1; ++ // BCKSPC: '<-'(14) and 'Delete'(111) on keyboard, '.Del'(83) on numpad. ++ if (scan_code == 14 || scan_code == 111 || scan_code == 83) ++ backspace = 1; ++ // TPM keys: 'm'(50) and '-'(12) chars on keyboard, '-'(74) on numpad. ++ if ((scan_code == 50 || scan_code == 12 || scan_code == 74) && tpm_cshm) ++ tpm_show_menu = 1; ++ ++ if (kb_choice != 0 || tpm_show_menu) { ++ if (kb_choice > maxmenu) { ++ if (!tpm_show_menu) ++ continue; ++ } else { ++ choice = kb_choice; ++ } ++ if (digits == 2) // Remove the decoded "(*)" ++ printf(" \b\b\b"); ++ /* Remove the existing input before printing a choice. */ ++ for (; digits > 0; digits--) ++ printf("\b \b"); ++ if (!tpm_show_menu) { ++ // Choice is any of the detected boot devices ==> lets boot! ++ break; ++ } ++ } else { ++ // Internal/USB Numpad console interface. ++ if (digits < 9) { ++ for (numpi = 0; numpi < 10; numpi++) { ++ if (scan_code == numpad_scancodes[numpi]) { ++ if (maxmenu <= 10) { // Console interface is not needed. ++ if ((numpi != 0 && numpi <= maxmenu) || ++ (numpi == 0 && 10 <= maxmenu)) { // 10(0) ++ choice = numpi; ++ enter = 1; // Fake ENTER to boot this entry now. ++ } else { // If no such an entry, don't try to boot. ++ break; ++ } ++ } else { ++ if (digits == 2) { ++ printf(" \b\b\b"); // Remove the decoded "(*)" ++ if (choice == 0) { ++ printf("\b\b \b\b"); // Remove "10". ++ digits = 0; ++ } ++ } ++ choice = 10 * choice + numpi; ++ } ++ if (choice > 0) { ++ printf("%d", numpi); // Print the entered digit. ++ digits++; ++ } else { ++ if (10 <= maxmenu) ++ printf("10(0)\b\b\b"); ++ else ++ printf("10(?)\b\b\b"); ++ digits = 2; ++ } ++ if (choice > 9 && digits == 2) // Decode into a letter. ++ decode = 1; ++ break; ++ } ++ } ++ } ++ if (backspace && digits > 0) { ++ backspace = 0; ++ choice = choice / 10; ++ if (digits == 2) { ++ printf(" \b\b\b"); // Remove the decoded "(*)" ++ // 0 turned into 10: one more Backspace is needed to remove. ++ if (choice == 0) { ++ printf("\b \b"); ++ digits--; ++ } ++ } ++ printf("\b \b"); // Remove the last entered digit. ++ digits--; ++ if (choice > 9 && digits == 2) // Decode into a letter. ++ decode = 1; ++ } ++ if (decode) { // Decode the current choice number into a letter. ++ decode = 0; ++ if (choice <= maxmenu) { ++ printf("(%c)", keyboard_keys[choice-1]); ++ } else { ++ if (tpm_cshm && choice == 36) ++ printf("(m)"); // For TPM. ++ else ++ printf("(?)"); // No matching letter found. ++ } ++ printf("\b\b\b"); // Move a cursor before the "(*)" ++ } ++ } ++ ++ if (enter) { ++ enter = 0; ++ if (choice == 0) { ++ if (digits == 2) { // for 0 that turned into 10 ++ if (10 <= maxmenu) ++ break; ++ else ++ continue; ++ } ++ // If there are two pages - switch between them. ++ if (maxmenu > BOOTMENU_PAGE_SIZE) { ++ entry_id = 0; ++ page_num = 3 - page_num; // 3 - 1 = 2; 3 - 2 = 1. ++ printf("\n\nSelect boot device - page %d :" ++ " // press ENTER after your numpad input" ++ " - if any -\n " ++ " // - or to switch between the pages...\n", ++ page_num); ++ hlist_for_each_entry(pos, &BootList, node) { ++ if ((page_num == 1 && entry_id == BOOTMENU_PAGE_SIZE) || ++ (page_num == 2 && entry_id == 35)) ++ break; ++ if (page_num == 1 || entry_id >= BOOTMENU_PAGE_SIZE) ++ printf("%c. %s\n", keyboard_keys[entry_id], ++ strtcpy(desc, pos->description, ARRAY_SIZE(desc))); ++ entry_id++; ++ } ++ if (tpm_cshm) ++ printf("\nm-. TPM Configuration"); ++ printf("\n> "); ++ } ++ } else { ++ if (choice > maxmenu) { ++ if (tpm_cshm && choice == 36) ++ tpm_show_menu = 1; ++ } else { ++ // Choice is any of the detected boot devices ==> lets boot! ++ break; ++ } ++ } ++ } ++ ++ if (tpm_show_menu) { ++ tpm_show_menu = 0; ++ choice = 0; ++ if (digits == 0) ++ printf("TPM key pressed."); ++ else ++ digits = 0; + printf("\n"); + tpm_menu(); ++ printf("> "); + } +- if (scan_code >= 1 && scan_code <= maxmenu+1) +- break; ++ } ++ ++ if (choice == 0) // 10(0) ++ choice = 10; ++ ++ if (digits == 0 && choice < 36) { ++ printf("%c", keyboard_keys[choice-1]); ++ if (choice > 9) // Decode into a number. ++ printf("(%d)", choice); + } + printf("\n"); +- if (scan_code == 0x01) +- // ESC +- return; + + // Find entry and make top priority. +- int choice = scan_code - 1; + hlist_for_each_entry(pos, &BootList, node) { + if (! --choice) + break; +diff --git a/src/config.h b/src/config.h +index 93c8dbc..f85cc14 100644 +--- a/src/config.h ++++ b/src/config.h +@@ -19,7 +19,7 @@ + // Space to reserve in high-memory for tables + #define BUILD_MAX_HIGHTABLE (256*1024) + // Largest supported externaly facing drive id +-#define BUILD_MAX_EXTDRIVE 16 ++#define BUILD_MAX_EXTDRIVE 36 + // Number of bytes the smbios may be and still live in the f-segment + #define BUILD_MAX_SMBIOS_FSEG 600 + // Maximum number of bytes the mptable may be and still be copied to f-segment diff --git a/payloads/external/SeaBIOS/multiple_floppies.patch b/payloads/external/SeaBIOS/multiple_floppies.patch new file mode 100644 index 0000000..5249394 --- /dev/null +++ b/payloads/external/SeaBIOS/multiple_floppies.patch @@ -0,0 +1,207 @@ +diff --git a/src/block.h b/src/block.h +index f64e880..aaa236f 100644 +--- a/src/block.h ++++ b/src/block.h +@@ -2,7 +2,7 @@ + #define __BLOCK_H + + #include "types.h" // u32 +- ++#include "romfile.h" // struct romfile_s + + /**************************************************************** + * Disk command request +@@ -48,6 +48,7 @@ struct drive_s { + struct drive_s { + u8 type; // Driver type (DTYPE_*) + u8 floppy_type; // Type of floppy (only for floppy drives). ++ struct romfile_s *floppy_file; // Floppy file (only for virtual floppies). + struct chs_s lchs; // Logical CHS + u64 sectors; // Total sectors count + u32 cntl_id; // Unique id for a given driver type. +diff --git a/src/boot.c b/src/boot.c +index 9f82f3c..79f1e7d 100644 +--- a/src/boot.c ++++ b/src/boot.c +@@ -584,7 +584,7 @@ bcv_prepboot(void) + break; + case IPL_TYPE_FLOPPY: + map_floppy_drive(pos->drive); +- add_bev(IPL_TYPE_FLOPPY, 0); ++ add_bev(IPL_TYPE_FLOPPY, (u32)pos->drive); + break; + case IPL_TYPE_HARDDISK: + map_hd_drive(pos->drive); +@@ -733,6 +733,12 @@ do_boot(int seq_nr) + static void + do_boot(int seq_nr) + { ++ ++ int ret; ++ void *pos; ++ struct romfile_s *file; ++ struct drive_s *drive; ++ + if (! CONFIG_BOOT) + panic("Boot support not compiled in.\n"); + +@@ -744,6 +750,16 @@ do_boot(int seq_nr) + switch (ie->type) { + case IPL_TYPE_FLOPPY: + printf("Booting from Floppy...\n"); ++ drive = (struct drive_s *)ie->vector; ++ file = drive->floppy_file; ++ // File is NULL if a floppy is physical. ++ if (file) { ++ // Copy virtual floppy image into ram. ++ pos = (void *)drive->cntl_id; ++ ret = file->copy(file, pos, file->size); ++ if (ret < 0) ++ break; ++ } + boot_disk(0x00, CheckFloppySig); + break; + case IPL_TYPE_HARDDISK: +diff --git a/src/hw/floppy.c b/src/hw/floppy.c +index 9e6647d..5b37c6c 100644 +--- a/src/hw/floppy.c ++++ b/src/hw/floppy.c +@@ -107,7 +107,7 @@ struct floppyinfo_s FloppyInfo[] VARFSEG = { + }; + + struct drive_s * +-init_floppy(int floppyid, int ftype) ++init_floppy(int floppyid, int ftype, struct romfile_s *ffile) + { + if (ftype <= 0 || ftype >= ARRAY_SIZE(FloppyInfo)) { + dprintf(1, "Bad floppy type %d\n", ftype); +@@ -124,6 +124,7 @@ init_floppy(int floppyid, int ftype) + drive->type = DTYPE_FLOPPY; + drive->blksize = DISK_SECTOR_SIZE; + drive->floppy_type = ftype; ++ drive->floppy_file = ffile; + drive->sectors = (u64)-1; + + memcpy(&drive->lchs, &FloppyInfo[ftype].chs +@@ -134,7 +135,7 @@ addFloppy(int floppyid, int ftype) + static void + addFloppy(int floppyid, int ftype) + { +- struct drive_s *drive = init_floppy(floppyid, ftype); ++ struct drive_s *drive = init_floppy(floppyid, ftype, 0); + if (!drive) + return; + char *desc = znprintf(MAXDESCSIZE, "Floppy [drive %c]", 'A' + floppyid); +diff --git a/src/hw/ramdisk.c b/src/hw/ramdisk.c +index b9e9baa..a679385 100644 +--- a/src/hw/ramdisk.c ++++ b/src/hw/ramdisk.c +@@ -23,40 +23,69 @@ ramdisk_setup(void) + if (!CONFIG_FLASH_FLOPPY) + return; + +- // Find image. +- struct romfile_s *file = romfile_findprefix("floppyimg/", NULL); +- if (!file) +- return; +- const char *filename = file->name; +- u32 size = file->size; +- dprintf(3, "Found floppy file %s of size %d\n", filename, size); +- int ftype = find_floppy_type(size); +- if (ftype < 0) { +- dprintf(3, "No floppy type found for ramdisk size\n"); ++ struct romfile_s *file = NULL; ++ char *filename, *desc; ++ u32 size, max_size = 0; ++ int ftype; ++ void *pos; ++ struct drive_s *drive; ++ ++ // Find the max floppy size ++ for (;;) { ++ // Find the next image. ++ file = romfile_findprefix("floppyimg/", file); ++ if (!file) ++ break; ++ filename = file->name; ++ size = file->size; ++ dprintf(3, "Found floppy file %s of size %d\n", filename, size); ++ // Check if this size is valid. ++ ftype = find_floppy_type(size); ++ if (ftype < 0) { ++ dprintf(3, "No floppy type found for ramdisk size\n"); ++ } else { ++ if (size > max_size) ++ max_size = size; ++ } ++ } ++ if (max_size == 0) { ++ dprintf(3, "No floppies found\n"); + return; + } + + // Allocate ram for image. +- void *pos = memalign_tmphigh(PAGE_SIZE, size); ++ pos = memalign_tmphigh(PAGE_SIZE, max_size); + if (!pos) { + warn_noalloc(); + return; + } +- e820_add((u32)pos, size, E820_RESERVED); ++ e820_add((u32)pos, max_size, E820_RESERVED); ++ dprintf(3, "Allocate %u bytes for a floppy\n", max_size); + +- // Copy image into ram. +- int ret = file->copy(file, pos, size); +- if (ret < 0) +- return; +- +- // Setup driver. +- struct drive_s *drive = init_floppy((u32)pos, ftype); +- if (!drive) +- return; +- drive->type = DTYPE_RAMDISK; +- dprintf(1, "Mapping floppy %s to addr %p\n", filename, pos); +- char *desc = znprintf(MAXDESCSIZE, "Ramdisk [%s]", &filename[10]); +- boot_add_floppy(drive, desc, bootprio_find_named_rom(filename, 0)); ++ // Setup the floppy drivers. ++ file = NULL; ++ for (;;) { ++ // Find the next image. ++ file = romfile_findprefix("floppyimg/", file); ++ if (!file) ++ return; ++ filename = file->name; ++ size = file->size; ++ dprintf(3, "Found floppy file %s of size %d\n", filename, size); ++ ftype = find_floppy_type(size); ++ if (ftype < 0) { ++ dprintf(3, "No floppy type found for ramdisk size\n"); ++ } else { ++ // Setup driver. ++ drive = init_floppy((u32)pos, ftype, file); ++ if (!drive) ++ return; ++ drive->type = DTYPE_RAMDISK; ++ dprintf(1, "Mapping floppy %s to addr %p\n", filename, pos); ++ desc = znprintf(MAXDESCSIZE, "Ramdisk [%s]", &filename[10]); ++ boot_add_floppy(drive, desc, bootprio_find_named_rom(filename, 0)); ++ } ++ } + } + + static int +diff --git a/src/util.h b/src/util.h +index 9c06850..ce3a26d 100644 +--- a/src/util.h ++++ b/src/util.h +@@ -147,7 +147,8 @@ void dma_setup(void); + // hw/floppy.c + extern struct floppy_ext_dbt_s diskette_param_table2; + void floppy_setup(void); +-struct drive_s *init_floppy(int floppyid, int ftype); ++extern struct romfile_s *ffile; ++struct drive_s *init_floppy(int floppyid, int ftype, struct romfile_s *ffile); + int find_floppy_type(u32 size); + int floppy_process_op(struct disk_op_s *op); + void floppy_tick(void); -- To view, visit https://review.coreboot.org/c/coreboot/+/32351 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Idf4efba31091a8678b51c2f6541d440c5cc6d37d Gerrit-Change-Number: 32351 Gerrit-PatchSet: 1 Gerrit-Owner: mikeb mikeb <mikebdp2(a)gmail.com> Gerrit-Reviewer: Mike Banon <mikebdp2(a)gmail.com> Gerrit-MessageType: newchange

5 32

Change in ...coreboot[master]: autoport: Add support for Haswell-LynxPoint platform
by Iru Cai (vimacs) (Code Review) July 14, 2024

July 14, 2024

Hello Iru Cai, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/30890 to review the following change. Change subject: autoport: Add support for Haswell-LynxPoint platform ...................................................................... autoport: Add support for Haswell-LynxPoint platform It can now generate a buildable source for Clevo W650SZ. TODO: - Support Lynx Point LP (GPIO registers differ from non-LP) - Use PCH HD-Audio in azilia instead of the CPU/Northbridge HD-Audio Change-Id: I4f6e8c97b5122101de2f36bba8ba9f8ddd5b813a Signed-off-by: Iru Cai <mytbk920423(a)gmail.com> --- M util/autoport/azalia.go A util/autoport/haswell.go A util/autoport/lynxpoint.go M util/autoport/main.go 4 files changed, 625 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/90/30890/1 diff --git a/util/autoport/azalia.go b/util/autoport/azalia.go index c525189..3090dd0 100644 --- a/util/autoport/azalia.go +++ b/util/autoport/azalia.go @@ -62,4 +62,9 @@ RegisterPCI(0x8086, 0x1c20, azalia{}) /* C216/ivybridge */ RegisterPCI(0x8086, 0x1e20, azalia{}) + /* Haswell */ + RegisterPCI(0x8086, 0x0c0c, azalia{}) + /* Lynx Point */ + RegisterPCI(0x8086, 0x8c20, azalia{}) + RegisterPCI(0x8086, 0x9c20, azalia{}) } diff --git a/util/autoport/haswell.go b/util/autoport/haswell.go new file mode 100644 index 0000000..d3c9d9f --- /dev/null +++ b/util/autoport/haswell.go @@ -0,0 +1,119 @@ +package main + +type haswellmc struct { + variant string +} + +func (i haswellmc) Scan(ctx Context, addr PCIDevData) { + inteltool := ctx.InfoSource.GetInteltool() + + /* FIXME:XX Move this somewhere else. */ + MainboardIncludes = append(MainboardIncludes, "drivers/intel/gma/int15.h") + MainboardEnable += (` /* FIXME: fix those values*/ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +`) + + DevTree = DevTreeNode{ + Chip: "northbridge/intel/haswell", + MissingParent: "northbridge", + Comment: "FIXME: check gfx.ndid and gfx.did", + Registers: map[string]string{ + "gpu_dp_b_hotplug": FormatInt32((inteltool.IGD[0xc4030] >> 2) & 7), + "gpu_dp_c_hotplug": FormatInt32((inteltool.IGD[0xc4030] >> 10) & 7), + "gpu_dp_d_hotplug": FormatInt32((inteltool.IGD[0xc4030] >> 18) & 7), + "gpu_panel_port_select": FormatInt32((inteltool.IGD[0xc7208] >> 30) & 3), + "gpu_panel_power_up_delay": FormatInt32((inteltool.IGD[0xc7208] >> 16) & 0x1fff), + "gpu_panel_power_backlight_on_delay": FormatInt32(inteltool.IGD[0xc7208] & 0x1fff), + "gpu_panel_power_down_delay": FormatInt32((inteltool.IGD[0xc720c] >> 16) & 0x1fff), + "gpu_panel_power_backlight_off_delay": FormatInt32(inteltool.IGD[0xc720c] & 0x1fff), + "gpu_panel_power_cycle_delay": FormatInt32(inteltool.IGD[0xc7210] & 0xff), + "gpu_cpu_backlight": FormatHex32(inteltool.IGD[0x48254]), + "gpu_pch_backlight": FormatHex32((inteltool.IGD[0xc8254] >> 16) * 0x10001), + "gpu_ddi_e_connected": FormatBool(((inteltool.IGD[0x64000] >> 4) & 1) == 0), + /* FIXME:XX hardcoded. */ + "gfx.ndid": "3", + "gfx.did": "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }", + }, + Children: []DevTreeNode{ + { + Chip: "cpu_cluster", + Dev: 0, + Children: []DevTreeNode{ + { + Chip: "cpu/intel/haswell", + Children: []DevTreeNode{ + { + Chip: "lapic", + Dev: 0, + }, + { + Chip: "lapic", + Dev: 0xacac, + Disabled: true, + }, + }, + Registers: map[string]string{ + /* FIXME:XX hardcoded. */ + "c1_acpower": "1", + "c2_acpower": "3", + "c3_acpower": "5", + "c1_battery": "1", + "c2_battery": "3", + "c3_battery": "5", + }, + }, + }, + }, + + { + Chip: "domain", + Dev: 0, + PCIController: true, + ChildPCIBus: 0, + PCISlots: []PCISlot{ + PCISlot{PCIAddr: PCIAddr{Dev: 0x0, Func: 0}, writeEmpty: true, additionalComment: "Host bridge"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1, Func: 0}, writeEmpty: true, additionalComment: "PCIe Bridge for discrete graphics"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x2, Func: 0}, writeEmpty: true, additionalComment: "Internal graphics"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x3, Func: 0}, writeEmpty: true, additionalComment: "Mini-HD audio"}, + }, + }, + }, + } + + PutPCIDev(addr, "Host bridge") + + /* FIXME:XX some configs are unsupported. */ + + KconfigBool["CPU_INTEL_HASWELL"] = true + KconfigBool["NORTHBRIDGE_INTEL_HASWELL"] = true + KconfigBool["INTEL_INT15"] = true + KconfigBool["HAVE_ACPI_TABLES"] = true + KconfigBool["HAVE_ACPI_RESUME"] = true + + KconfigInt["MAX_CPUS"] = 8 + + DSDTIncludes = append(DSDTIncludes, DSDTInclude{ + File: "cpu/intel/common/acpi/cpu.asl", + }) + + DSDTPCI0Includes = append(DSDTPCI0Includes, DSDTInclude{ + File: "northbridge/intel/haswell/acpi/haswell.asl", + }, DSDTInclude{ + File: "drivers/intel/gma/acpi/default_brightness_levels.asl", + }) +} + +func init() { + RegisterPCI(0x8086, 0x0c00, haswellmc{variant: "Desktop"}) + RegisterPCI(0x8086, 0x0c04, haswellmc{variant: "Mobile"}) + RegisterPCI(0x8086, 0x0a04, haswellmc{variant: "ULT"}) + RegisterPCI(0x8086, 0x0c08, haswellmc{variant: "Server"}) + for _, id := range []uint16{ + 0x0402, 0x0412, 0x0422, + 0x0406, 0x0416, 0x0426, + 0x0d16, 0x0d26, 0x0d36, + 0x0a06, 0x0a16, 0x0a26, + } { + RegisterPCI(0x8086, id, GenericVGA{GenericPCI{Comment: "VGA controller"}}) + } +} diff --git a/util/autoport/lynxpoint.go b/util/autoport/lynxpoint.go new file mode 100644 index 0000000..df20c3f --- /dev/null +++ b/util/autoport/lynxpoint.go @@ -0,0 +1,495 @@ +package main + +import ( + "fmt" + "os" +) + +type lynxpoint struct { + variant string + node *DevTreeNode +} + +func (b lynxpoint) writeGPIOSet(ctx Context, sb *os.File, + val uint32, set uint, partno int, constraint uint32) { + + max := uint(32) + if set == 3 { + max = 12 + } + + bits := [6][2]string{ + {"GPIO_MODE_NATIVE", "GPIO_MODE_GPIO"}, + {"GPIO_DIR_OUTPUT", "GPIO_DIR_INPUT"}, + {"GPIO_LEVEL_LOW", "GPIO_LEVEL_HIGH"}, + {"GPIO_RESET_PWROK", "GPIO_RESET_RSMRST"}, + {"GPIO_NO_INVERT", "GPIO_INVERT"}, + {"GPIO_NO_BLINK", "GPIO_BLINK"}, + } + + for i := uint(0); i < max; i++ { + if ((constraint>>i)&1 == 1) { + fmt.Fprintf(sb, " .gpio%d = %s,\n", + (set-1)*32+i, + bits[partno][(val>>i)&1]) + } + } +} + +func (b lynxpoint) GPIO(ctx Context, inteltool InteltoolData) { + var constraint uint32 + gpio := Create(ctx, "gpio.c") + defer gpio.Close() + + AddROMStageFile("gpio.c", "") + + Add_gpl(gpio) + gpio.WriteString("#include <southbridge/intel/common/gpio.h>\n\n") + + /* TODO: different in LP PCH */ + addresses := [3][6]int{ + {0x00, 0x04, 0x0c, 0x60, 0x2c, 0x18}, + {0x30, 0x34, 0x38, 0x64, -1, -1}, + {0x40, 0x44, 0x48, 0x68, -1, -1}, + } + + for set := 1; set <= 3; set++ { + for partno, part := range []string{"mode", "direction", "level", "reset", "invert", "blink"} { + addr := addresses[set-1][partno] + if addr < 0 { + continue + } + fmt.Fprintf(gpio, "static const struct pch_gpio_set%d pch_gpio_set%d_%s = {\n", + set, set, part) + + constraint = 0xffffffff + switch part { + case "direction": + /* Ignored on native mode */ + constraint = inteltool.GPIO[uint16(addresses[set-1][0])] + case "level": + /* Level doesn't matter for input */ + constraint = inteltool.GPIO[uint16(addresses[set-1][0])] + constraint &^= inteltool.GPIO[uint16(addresses[set-1][1])] + case "reset": + /* Only show reset */ + constraint = inteltool.GPIO[uint16(addresses[set-1][3])] + case "invert": + /* Only on input and only show inverted GPIO */ + constraint = inteltool.GPIO[uint16(addresses[set-1][0])] + constraint &= inteltool.GPIO[uint16(addresses[set-1][1])] + constraint &= inteltool.GPIO[uint16(addresses[set-1][4])] + case "blink": + /* Only on output and only show blinking GPIO */ + constraint = inteltool.GPIO[uint16(addresses[set-1][0])] + constraint &^= inteltool.GPIO[uint16(addresses[set-1][1])] + constraint &= inteltool.GPIO[uint16(addresses[set-1][5])] + } + b.writeGPIOSet(ctx, gpio, inteltool.GPIO[uint16(addr)], uint(set), partno, constraint) + gpio.WriteString("};\n\n") + } + } + + gpio.WriteString(`const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; +`) +} + +func (b lynxpoint) IsPCIeHotplug(ctx Context, port int) bool { + portDev, ok := PCIMap[PCIAddr{Bus: 0, Dev: 0x1c, Func: port}] + if !ok { + return false + } + return (portDev.ConfigDump[0xdb] & (1 << 6)) != 0 +} + +func (b lynxpoint) GetGPIOHeader() string { + return "southbridge/intel/lynxpoint/pch.h" +} + +func (b lynxpoint) EnableGPE(in int) { + b.node.Registers[fmt.Sprintf("gpi%d_routing", in)] = "2" +} + +func (b lynxpoint) EncodeGPE(in int) int { + return in + 0x10 +} + +func (b lynxpoint) DecodeGPE(in int) int { + return in - 0x10 +} + +func (b lynxpoint) NeedRouteGPIOManually() { + b.node.Comment += ", FIXME: set gpiX_routing for EC support" +} + +func (b lynxpoint) Scan(ctx Context, addr PCIDevData) { + + SouthBridge = &b + + inteltool := ctx.InfoSource.GetInteltool() + b.GPIO(ctx, inteltool) + + KconfigBool["SOUTHBRIDGE_INTEL_LYNXPOINT"] = true + if b.variant == "Lynx Point LP" { + KconfigBool["INTEL_LYNXPOINT_LP"] = true + } + KconfigBool["SERIRQ_CONTINUOUS_MODE"] = true + KconfigInt["USBDEBUG_HCD_INDEX"] = 2 + KconfigComment["USBDEBUG_HCD_INDEX"] = "FIXME: check this" + dmi := ctx.InfoSource.GetDMI() + if dmi.Vendor == "LENOVO" { + KconfigInt["DRAM_RESET_GATE_GPIO"] = 10 + } else { + KconfigInt["DRAM_RESET_GATE_GPIO"] = 60 + } + KconfigComment["DRAM_RESET_GATE_GPIO"] = "FIXME: check this" + + /* Not strictly speaking correct. These subsys/subvendor referer to PCI devices. + But most systems don't have any of those. But the config needs to be set + nevertheless. So set it to southbridge subsys/subvendor. */ + KconfigHex["MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID"] = uint32(GetLE16(addr.ConfigDump[0x2c:0x2e])) + KconfigHex["MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID"] = uint32(GetLE16(addr.ConfigDump[0x2e:0x30])) + + ich9GetFlashSize(ctx) + + DSDTDefines = append(DSDTDefines, + DSDTDefine{ + Key: "BRIGHTNESS_UP", + Value: "\\_SB.PCI0.GFX0.INCB", + }, + DSDTDefine{ + Key: "BRIGHTNESS_DOWN", + Value: "\\_SB.PCI0.GFX0.DECB", + }, + DSDTDefine{ + Key: "ACPI_VIDEO_DEVICE", + Value: "\\_SB.PCI0.GFX0", + }) + + /* SPI init */ + MainboardIncludes = append(MainboardIncludes, "southbridge/intel/lynxpoint/pch.h") + + cur := DevTreeNode{ + Chip: "southbridge/intel/lynxpoint", + Comment: "Intel Series 8 Lynx Point PCH", + + Registers: map[string]string{ + "pirqa_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x60]), + "pirqb_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x61]), + "pirqc_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x62]), + "pirqd_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x63]), + "pirqe_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x68]), + "pirqf_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x69]), + "pirqg_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x6a]), + "pirqh_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x6b]), + "sata_ahci": "1", + "gen1_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x84:0x88]), + "gen2_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x88:0x8c]), + "gen3_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x8c:0x90]), + "gen4_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x90:0x94]), + "sata_port_map": fmt.Sprintf("0x%x", PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 2}].ConfigDump[0x92]&0x3f), + }, + PCISlots: []PCISlot{ + PCISlot{PCIAddr: PCIAddr{Dev: 0x14, Func: 0}, writeEmpty: false, additionalComment: "USB 3.0 Controller"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 0}, writeEmpty: true, additionalComment: "Management Engine Interface 1"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 1}, writeEmpty: true, additionalComment: "Management Engine Interface 2"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 2}, writeEmpty: true, additionalComment: "Management Engine IDE-R"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 3}, writeEmpty: true, additionalComment: "Management Engine KT"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x19, Func: 0}, writeEmpty: true, additionalComment: "Intel Gigabit Ethernet"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1a, Func: 0}, writeEmpty: true, additionalComment: "USB2 EHCI #2"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1b, Func: 0}, writeEmpty: true, additionalComment: "High Definition Audio"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 0}, writeEmpty: true, additionalComment: "PCIe Port #1"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 1}, writeEmpty: true, additionalComment: "PCIe Port #2"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 2}, writeEmpty: true, additionalComment: "PCIe Port #3"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 3}, writeEmpty: true, additionalComment: "PCIe Port #4"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 4}, writeEmpty: true, additionalComment: "PCIe Port #5"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 5}, writeEmpty: true, additionalComment: "PCIe Port #6"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 6}, writeEmpty: true, additionalComment: "PCIe Port #7"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 7}, writeEmpty: true, additionalComment: "PCIe Port #8"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1d, Func: 0}, writeEmpty: true, additionalComment: "USB2 EHCI #1"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1e, Func: 0}, writeEmpty: true, additionalComment: "PCI bridge"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 0}, writeEmpty: true, additionalComment: "LPC bridge"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 2}, writeEmpty: true, additionalComment: "SATA Controller 1"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 3}, writeEmpty: true, additionalComment: "SMBus"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 5}, writeEmpty: true, additionalComment: "SATA Controller 2"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 6}, writeEmpty: true, additionalComment: "Thermal"}, + }, + } + + b.node = &cur + + PutPCIChip(addr, cur) + PutPCIDevParent(addr, "PCI-LPC bridge", "lpc") + + DSDTIncludes = append(DSDTIncludes, DSDTInclude{ + File: "southbridge/intel/lynxpoint/acpi/platform.asl", + }) + DSDTIncludes = append(DSDTIncludes, DSDTInclude{ + File: "southbridge/intel/lynxpoint/acpi/globalnvs.asl", + Comment: "global NVS and variables", + }) + DSDTIncludes = append(DSDTIncludes, DSDTInclude{ + File: "southbridge/intel/lynxpoint/acpi/sleepstates.asl", + }) + DSDTPCI0Includes = append(DSDTPCI0Includes, DSDTInclude{ + File: "southbridge/intel/lynxpoint/acpi/pch.asl", + }) + + sb := Create(ctx, "romstage.c") + defer sb.Close() + Add_gpl(sb) + sb.WriteString(`#include <stdint.h> +#include <cpu/intel/romstage.h> +#include <cpu/intel/haswell/haswell.h> +#include <northbridge/intel/haswell/haswell.h> +#include <northbridge/intel/haswell/pei_data.h> +#include <southbridge/intel/common/gpio.h> +#include <southbridge/intel/lynxpoint/pch.h> + +static const struct rcba_config_instruction rcba_config[] = { +`) + RestoreDIRRoute(sb, "D31IR", uint16(inteltool.RCBA[0x3140])) + RestoreDIRRoute(sb, "D29IR", uint16(inteltool.RCBA[0x3144])) + RestoreDIRRoute(sb, "D28IR", uint16(inteltool.RCBA[0x3146])) + RestoreDIRRoute(sb, "D27IR", uint16(inteltool.RCBA[0x3148])) + RestoreDIRRoute(sb, "D26IR", uint16(inteltool.RCBA[0x314c])) + RestoreDIRRoute(sb, "D25IR", uint16(inteltool.RCBA[0x3150])) + RestoreDIRRoute(sb, "D22IR", uint16(inteltool.RCBA[0x315c])) + RestoreDIRRoute(sb, "D20IR", uint16(inteltool.RCBA[0x3160])) + + sb.WriteString(` + RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS), + + RCBA_END_CONFIG, +};`) + + sb.WriteString(` + +void mainboard_config_superio(void) +{ +} + +void mainboard_romstage_entry(unsigned long bist) +{ + struct pei_data pei_data = { + .pei_version = PEI_VERSION, + .mchbar = (uintptr_t)DEFAULT_MCHBAR, + .dmibar = (uintptr_t)DEFAULT_DMIBAR, + .epbar = DEFAULT_EPBAR, + .pciexbar = DEFAULT_PCIEXBAR, + .smbusbar = SMBUS_IO_BASE, + .wdbbar = 0x4000000, + .wdbsize = 0x1000, + .hpet_address = HPET_ADDR, + .rcba = (uintptr_t)DEFAULT_RCBA, + .pmbase = DEFAULT_PMBASE, + .gpiobase = DEFAULT_GPIOBASE, + .temp_mmio_base = 0xfed08000, + .system_type = 1, /* desktop/server, FIXME: check this */ + .tseg_size = CONFIG_SMM_TSEG_SIZE, + .spd_addresses = { 0xa0, 0xa2, 0xa4, 0xa6 }, /* FIXME: check this */ + .ec_present = 0, + .dimm_channel0_disabled = 0, /* FIXME: leave channel 0 enabled */ + .dimm_channel1_disabled = 0, /* FIXME: leave channel 1 enabled */ + .max_ddr3_freq = 1600, + .usb2_ports = { + /* Length, Enable, OCn#, Location */ +`) + + pdo1 := PCIMap[PCIAddr{Bus: 0, Dev: 0x1d, Func: 0}].ConfigDump[0x64] + ocmap1 := PCIMap[PCIAddr{Bus: 0, Dev: 0x1d, Func: 0}].ConfigDump[0x74:0x78] + pdo2 := PCIMap[PCIAddr{Bus: 0, Dev: 0x1a, Func: 0}].ConfigDump[0x64] + ocmap2 := PCIMap[PCIAddr{Bus: 0, Dev: 0x1a, Func: 0}].ConfigDump[0x74:0x78] + + for port := uint(0); port < 14; port++ { + var port_oc int = -1 + var port_pos string + var port_disable uint8 + + if port < 8 { + port_disable = (pdo1 >> port) & 1 + for oc := 0; oc < 4; oc++ { + if ((ocmap1[oc] & (1 << port)) != 0) { + port_oc = oc + break + } + } + } else { + port_disable = (pdo2 >> (port - 8)) & 1 + for oc := 0; oc < 4; oc++ { + if ((ocmap2[oc] & (1 << (port - 8))) != 0) { + port_oc = oc + 4 + break + } + } + } + if port_disable == 1 { + port_pos = "USB_PORT_SKIP" + } else { + port_pos = "USB_PORT_BACK_PANEL" + } + if port_oc == -1 { + fmt.Fprintf(sb, " { 0x0040, %d, USB_OC_PIN_SKIP, %s },\n", + (port_disable ^ 1), port_pos) + } else { + fmt.Fprintf(sb, " { 0x0040, %d, %d, %s },\n", + (port_disable ^ 1), port_oc, port_pos) + } + } + + sb.WriteString(` }, + .usb3_ports = { +`) + + xpdo := PCIMap[PCIAddr{Bus: 0, Dev: 0x14, Func: 0}].ConfigDump[0xe8] + u3ocm := PCIMap[PCIAddr{Bus: 0, Dev: 0x14, Func: 0}].ConfigDump[0xc8:0xd0] + + for port := uint(0); port < 6; port++ { + var port_oc int = -1 + port_disable := (xpdo >> port) & 1 + for oc := 0; oc < 8; oc++ { + if (u3ocm[oc] & (1 << port)) != 0 { + port_oc = oc + break + } + } + if port_oc == -1 { + fmt.Fprintf(sb, " { %d, USB_OC_PIN_SKIP },\n", + (port_disable ^ 1)) + } else { + fmt.Fprintf(sb, " { %d, %d },\n", + (port_disable ^ 1), port_oc) + } + } + + sb.WriteString(` }, + }; + + struct romstage_params romstage_params = { + .pei_data = &pei_data, + .gpio_map = &mainboard_gpio_map, + .rcba_config = &rcba_config[0], + .bist = bist, + }; + + romstage_common(&romstage_params); +}`) + + gnvs := Create(ctx, "acpi_tables.c") + defer gnvs.Close() + + Add_gpl(gnvs) + gnvs.WriteString(`#include <southbridge/intel/lynxpoint/nvs.h> + +/* FIXME: check this function. */ +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + // the lid is open by default. + gnvs->lids = 1; + + gnvs->tcrt = 100; + gnvs->tpsv = 90; +} +`) + +} + +func init() { + for _, id := range []uint16 { + 0x8c41, 0x8c49, 0x8c4b, 0x8c4f, + } { + RegisterPCI(0x8086, uint16(id), lynxpoint{variant: "Lynx Point Mobile"}) + } + + for _, id := range []uint16 { + 0x8c42, 0x8c44, 0x8c46, 0x8c4a, + 0x8c4c, 0x8c4e, 0x8c50, 0x8c5c, + } { + RegisterPCI(0x8086, uint16(id), lynxpoint{variant: "Lynx Point Desktop"}) + } + + for _, id := range []uint16 { + 0x8c52, 0x8c54, 0x8c56, + } { + RegisterPCI(0x8086, uint16(id), lynxpoint{variant: "Lynx Point Server"}) + } + + for _, id := range []uint16 { + 0x9c41, 0x9c43, 0x9c45, + } { + RegisterPCI(0x8086, uint16(id), lynxpoint{variant: "Lynx Point LP"}) + } + + /* PCIe bridge */ + for _, id := range []uint16{ + 0x8c10, 0x8c12, 0x8c14, 0x8c16, 0x8c18, 0x8c1a, 0x8c1c, 0x8c1e, + 0x9c10, 0x9c12, 0x9c14, 0x9c16, 0x9c18, 0x9c1a, + } { + RegisterPCI(0x8086, id, GenericPCI{}) + } + + /* SMBus controller */ + RegisterPCI(0x8086, 0x1c22, GenericPCI{MissingParent: "smbus"}) + RegisterPCI(0x8086, 0x1e22, GenericPCI{MissingParent: "smbus"}) + RegisterPCI(0x8086, 0x8c22, GenericPCI{MissingParent: "smbus"}) + RegisterPCI(0x8086, 0x9c22, GenericPCI{MissingParent: "smbus"}) + + /* SATA */ + for _, id := range []uint16{ + 0x8c00, 0x8c02, 0x8c04, 0x8c06, 0x8c08, 0x8c0e, + 0x8c01, 0x8c03, 0x8c05, 0x8c07, 0x8c09, 0x8c0f, + 0x9c03, 0x9c05, 0x9c07, 0x9c0f, + } { + RegisterPCI(0x8086, id, GenericPCI{}) + } + + /* EHCI */ + for _, id := range []uint16{ + 0x9c26, 0x8c26, 0x8c2d, + } { + RegisterPCI(0x8086, id, GenericPCI{}) + } + + /* XHCI */ + RegisterPCI(0x8086, 0x8c31, GenericPCI{}) + RegisterPCI(0x8086, 0x9c31, GenericPCI{}) + + /* ME and children */ + for _, id := range []uint16{ + 0x8c3a, 0x8c3b, + } { + RegisterPCI(0x8086, id, GenericPCI{}) + } + + /* Ethernet */ + RegisterPCI(0x8086, 0x8c33, GenericPCI{}) +} diff --git a/util/autoport/main.go b/util/autoport/main.go index 05a829b..c1920a7 100644 --- a/util/autoport/main.go +++ b/util/autoport/main.go @@ -236,6 +236,12 @@ pcidev.ConfigDump[addr]) } +func RestoreDIRRoute(f *os.File, regname string, val uint16) { + fmt.Fprintf(f, " RCBA_SET_REG_16(%s, DIR_ROUTE(PIRQ%c, PIRQ%c, PIRQ%c, PIRQ%c)),\n", + regname, 'A' + (val & 7), 'A' + ((val >> 4) & 7), + 'A' + ((val >> 8) & 7), 'A' + ((val >> 12) & 7)) +} + func RestorePCI32Simple(f *os.File, pcidev PCIDevData, addr uint16) { fmt.Fprintf(f, " pci_write_config32(PCI_DEV(%d, 0x%02x, %d), 0x%02x, 0x%02x%02x%02x%02x);\n", pcidev.Bus, pcidev.Dev, pcidev.Func, addr, -- To view, visit https://review.coreboot.org/c/coreboot/+/30890 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I4f6e8c97b5122101de2f36bba8ba9f8ddd5b813a Gerrit-Change-Number: 30890 Gerrit-PatchSet: 1 Gerrit-Owner: Iru Cai (vimacs) <mytbk920423(a)gmail.com> Gerrit-Reviewer: Iru Cai <mytbk920423(a)gmail.com> Gerrit-MessageType: newchange

15 92

Change in ...coreboot[master]: mainboard/samsung/350v5c: add initial board files
by Kacper Słomiński (Code Review) June 8, 2024

June 8, 2024

Kacper Słomiński has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/30942 Change subject: mainboard/samsung/350v5c: add initial board files ...................................................................... mainboard/samsung/350v5c: add initial board files Signed-off-by: Kacper Słomiński <kacper.slominski72(a)gmail.com> Change-Id: I64fcf931938fb3b158b9576b787f452bf6077843 --- A src/mainboard/samsung/350v5c/Kconfig A src/mainboard/samsung/350v5c/Kconfig.name A src/mainboard/samsung/350v5c/Makefile.inc A src/mainboard/samsung/350v5c/acpi/ec.asl A src/mainboard/samsung/350v5c/acpi/platform.asl A src/mainboard/samsung/350v5c/acpi/superio.asl A src/mainboard/samsung/350v5c/acpi_tables.c A src/mainboard/samsung/350v5c/board_info.txt A src/mainboard/samsung/350v5c/devicetree.cb A src/mainboard/samsung/350v5c/dsdt.asl A src/mainboard/samsung/350v5c/gnvs.c A src/mainboard/samsung/350v5c/gpio.c A src/mainboard/samsung/350v5c/hda_verb.c A src/mainboard/samsung/350v5c/mainboard.c A src/mainboard/samsung/350v5c/romstage.c 15 files changed, 705 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/42/30942/1 diff --git a/src/mainboard/samsung/350v5c/Kconfig b/src/mainboard/samsung/350v5c/Kconfig new file mode 100644 index 0000000..5ec7139 --- /dev/null +++ b/src/mainboard/samsung/350v5c/Kconfig @@ -0,0 +1,53 @@ +if BOARD_SAMSUNG_350V5C + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_6144 + select CPU_INTEL_SOCKET_RPGA989 + select EC_ACPI + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select INTEL_INT15 + select NORTHBRIDGE_INTEL_IVYBRIDGE + select SANDYBRIDGE_IVYBRIDGE_LVDS + select SERIRQ_CONTINUOUS_MODE + select SOUTHBRIDGE_INTEL_C216 + select SYSTEM_TYPE_LAPTOP + select USE_NATIVE_RAMINIT + +config MAINBOARD_DIR + string + default samsung/350v5c + +config MAINBOARD_PART_NUMBER + string + default "350V5C" + +config VGA_BIOS_FILE + string + default "pci8086,0166.rom" + +config VGA_BIOS_ID + string + default "8086,0166" + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0xc0d8 + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x144d + +config DRAM_RESET_GATE_GPIO # FIXME: check this + int + default 60 + +config MAX_CPUS + int + default 8 + +config USBDEBUG_HCD_INDEX # FIXME: check this + int + default 2 +endif diff --git a/src/mainboard/samsung/350v5c/Kconfig.name b/src/mainboard/samsung/350v5c/Kconfig.name new file mode 100644 index 0000000..9a2e96a --- /dev/null +++ b/src/mainboard/samsung/350v5c/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_SAMSUNG_350V5C + bool "350V5C" diff --git a/src/mainboard/samsung/350v5c/Makefile.inc b/src/mainboard/samsung/350v5c/Makefile.inc new file mode 100644 index 0000000..c55eebe --- /dev/null +++ b/src/mainboard/samsung/350v5c/Makefile.inc @@ -0,0 +1,2 @@ +romstage-y += gpio.c +ramstage-y += gnvs.c diff --git a/src/mainboard/samsung/350v5c/acpi/ec.asl b/src/mainboard/samsung/350v5c/acpi/ec.asl new file mode 100644 index 0000000..f2f4269 --- /dev/null +++ b/src/mainboard/samsung/350v5c/acpi/ec.asl @@ -0,0 +1,7 @@ +Device(EC) +{ + Name (_HID, EISAID("PNP0C09")) + Name (_UID, 0) + Name (_GPE, 23) +/* FIXME: EC support */ +} diff --git a/src/mainboard/samsung/350v5c/acpi/platform.asl b/src/mainboard/samsung/350v5c/acpi/platform.asl new file mode 100644 index 0000000..c2862c9 --- /dev/null +++ b/src/mainboard/samsung/350v5c/acpi/platform.asl @@ -0,0 +1,10 @@ +Method(_WAK,1) +{ + /* FIXME: EC support */ + Return(Package(){0,0}) +} + +Method(_PTS,1) +{ + /* FIXME: EC support */ +} diff --git a/src/mainboard/samsung/350v5c/acpi/superio.asl b/src/mainboard/samsung/350v5c/acpi/superio.asl new file mode 100644 index 0000000..f2b35ba --- /dev/null +++ b/src/mainboard/samsung/350v5c/acpi/superio.asl @@ -0,0 +1 @@ +#include <drivers/pc80/pc/ps2_controller.asl> diff --git a/src/mainboard/samsung/350v5c/acpi_tables.c b/src/mainboard/samsung/350v5c/acpi_tables.c new file mode 100644 index 0000000..2997587 --- /dev/null +++ b/src/mainboard/samsung/350v5c/acpi_tables.c @@ -0,0 +1 @@ +/* dummy */ diff --git a/src/mainboard/samsung/350v5c/board_info.txt b/src/mainboard/samsung/350v5c/board_info.txt new file mode 100644 index 0000000..cdbf8b8 --- /dev/null +++ b/src/mainboard/samsung/350v5c/board_info.txt @@ -0,0 +1,4 @@ +Category: laptop +ROM protocol: SPI +Flashrom support: n +FIXME: put ROM package, ROM socketed, Release year diff --git a/src/mainboard/samsung/350v5c/devicetree.cb b/src/mainboard/samsung/350v5c/devicetree.cb new file mode 100644 index 0000000..91093c0 --- /dev/null +++ b/src/mainboard/samsung/350v5c/devicetree.cb @@ -0,0 +1,119 @@ +chip northbridge/intel/sandybridge # FIXME: check gfx.ndid and gfx.did + register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }" + register "gfx.link_frequency_270_mhz" = "0" + register "gfx.ndid" = "3" + register "gfx.use_spread_spectrum_clock" = "0" + register "gpu_cpu_backlight" = "0x00000000" + register "gpu_dp_b_hotplug" = "0" + register "gpu_dp_c_hotplug" = "0" + register "gpu_dp_d_hotplug" = "0" + register "gpu_panel_port_select" = "0" + register "gpu_panel_power_backlight_off_delay" = "0" + register "gpu_panel_power_backlight_on_delay" = "0" + register "gpu_panel_power_cycle_delay" = "0" + register "gpu_panel_power_down_delay" = "0" + register "gpu_panel_power_up_delay" = "0" + register "gpu_pch_backlight" = "0x00000000" + device cpu_cluster 0x0 on + chip cpu/intel/socket_rPGA989 + device lapic 0x0 on + end + end + chip cpu/intel/model_206ax # FIXME: check all registers + register "c1_acpower" = "1" + register "c1_battery" = "1" + register "c2_acpower" = "3" + register "c2_battery" = "3" + register "c3_acpower" = "5" + register "c3_battery" = "5" + device lapic 0xacac off + end + end + end + device domain 0x0 on + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "c2_latency" = "0x0065" + register "docking_supported" = "1" + register "gen1_dec" = "0x00040069" + register "gen2_dec" = "0x0004fd61" + register "gen3_dec" = "0x00000000" + register "gen4_dec" = "0x00000000" + register "gpi7_routing" = "2" + register "p_cnt_throttling_supported" = "0" + register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }" + register "pcie_port_coalesce" = "1" + register "sata_interface_speed_support" = "0x3" + register "sata_port_map" = "0x11" + register "spi_lvscc" = "0x2005" + register "spi_uvscc" = "0x2005" + register "superspeed_capable_ports" = "0x0000000f" + register "xhci_overcurrent_mapping" = "0x00000c03" + register "xhci_switchable_ports" = "0x0000000f" + device pci 14.0 on # USB 3.0 Controller + subsystemid 0x144d 0xc0d8 + end + device pci 16.0 on # Management Engine Interface 1 + subsystemid 0x144d 0xc0d8 + end + device pci 16.1 off # Management Engine Interface 2 + end + device pci 16.2 off # Management Engine IDE-R + end + device pci 16.3 off # Management Engine KT + end + device pci 19.0 off # Intel Gigabit Ethernet + end + device pci 1a.0 on # USB2 EHCI #2 + subsystemid 0x144d 0xc0d8 + end + device pci 1b.0 on # High Definition Audio Audio controller + subsystemid 0x144d 0xc0d8 + end + device pci 1c.0 on # PCIe Port #1 + subsystemid 0x144d 0xc0d8 + end + device pci 1c.1 on # PCIe Port #2 + subsystemid 0x144d 0xc0d8 + end + device pci 1c.2 off # PCIe Port #3 + end + device pci 1c.3 off # PCIe Port #4 + end + device pci 1c.4 off # PCIe Port #5 + end + device pci 1c.5 off # PCIe Port #6 + end + device pci 1c.6 off # PCIe Port #7 + end + device pci 1c.7 off # PCIe Port #8 + end + device pci 1d.0 on # USB2 EHCI #1 + subsystemid 0x144d 0xc0d8 + end + device pci 1e.0 off # PCI bridge + end + device pci 1f.0 on # LPC bridge PCI-LPC bridge + subsystemid 0x144d 0xc0d8 + end + device pci 1f.2 on # SATA Controller 1 + subsystemid 0x144d 0xc0d8 + end + device pci 1f.3 on # SMBus + subsystemid 0x144d 0xc0d8 + end + device pci 1f.5 off # SATA Controller 2 + end + device pci 1f.6 off # Thermal + end + end + device pci 00.0 on # Host bridge Host bridge + subsystemid 0x144d 0xc0d8 + end + device pci 01.0 on # PCIe Bridge for discrete graphics + subsystemid 0x144d 0xc0d8 + end + device pci 02.0 on # Internal graphics VGA controller + subsystemid 0x144d 0xc0d8 + end + end +end diff --git a/src/mainboard/samsung/350v5c/dsdt.asl b/src/mainboard/samsung/350v5c/dsdt.asl new file mode 100644 index 0000000..fb55547 --- /dev/null +++ b/src/mainboard/samsung/350v5c/dsdt.asl @@ -0,0 +1,30 @@ +#define BRIGHTNESS_UP \_SB.PCI0.GFX0.INCB +#define BRIGHTNESS_DOWN \_SB.PCI0.GFX0.DECB +#define ACPI_VIDEO_DEVICE \_SB.PCI0.GFX0 +#include <arch/acpi.h> +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI 2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20141018 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + #include <cpu/intel/model_206ax/acpi/cpu.asl> + #include <southbridge/intel/bd82x6x/acpi/platform.asl> + /* global NVS and variables. */ + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> + + Scope (\_SB) { + Device (PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <drivers/intel/gma/acpi/default_brightness_levels.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } + } +} diff --git a/src/mainboard/samsung/350v5c/gnvs.c b/src/mainboard/samsung/350v5c/gnvs.c new file mode 100644 index 0000000..6b731cc --- /dev/null +++ b/src/mainboard/samsung/350v5c/gnvs.c @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/bd82x6x/nvs.h> + +/* FIXME: check this function. */ +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + // the lid is open by default. + gnvs->lids = 1; + + gnvs->tcrt = 100; + gnvs->tpsv = 90; +} diff --git a/src/mainboard/samsung/350v5c/gpio.c b/src/mainboard/samsung/350v5c/gpio.c new file mode 100644 index 0000000..6bf860f --- /dev/null +++ b/src/mainboard/samsung/350v5c/gpio.c @@ -0,0 +1,232 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_NATIVE, + .gpio11 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_NATIVE, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_NATIVE, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_NATIVE, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_NATIVE, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_NATIVE, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_OUTPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio4 = GPIO_LEVEL_LOW, + .gpio12 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_LOW, + .gpio27 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, + .gpio29 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { + .gpio24 = GPIO_RESET_RSMRST, + .gpio30 = GPIO_RESET_RSMRST, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio1 = GPIO_INVERT, + .gpio3 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, + .gpio8 = GPIO_INVERT, + .gpio15 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, + .gpio33 = GPIO_MODE_NATIVE, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_NATIVE, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_GPIO, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_GPIO, + .gpio46 = GPIO_MODE_GPIO, + .gpio47 = GPIO_MODE_NATIVE, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_GPIO, + .gpio51 = GPIO_MODE_GPIO, + .gpio52 = GPIO_MODE_GPIO, + .gpio53 = GPIO_MODE_GPIO, + .gpio54 = GPIO_MODE_GPIO, + .gpio55 = GPIO_MODE_GPIO, + .gpio56 = GPIO_MODE_GPIO, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_GPIO, + .gpio61 = GPIO_MODE_GPIO, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio34 = GPIO_DIR_OUTPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio37 = GPIO_DIR_OUTPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio42 = GPIO_DIR_OUTPUT, + .gpio45 = GPIO_DIR_INPUT, + .gpio46 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_OUTPUT, + .gpio50 = GPIO_DIR_OUTPUT, + .gpio51 = GPIO_DIR_OUTPUT, + .gpio52 = GPIO_DIR_OUTPUT, + .gpio53 = GPIO_DIR_OUTPUT, + .gpio54 = GPIO_DIR_OUTPUT, + .gpio55 = GPIO_DIR_OUTPUT, + .gpio56 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio60 = GPIO_DIR_OUTPUT, + .gpio61 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio34 = GPIO_LEVEL_LOW, + .gpio35 = GPIO_LEVEL_HIGH, + .gpio37 = GPIO_LEVEL_LOW, + .gpio42 = GPIO_LEVEL_LOW, + .gpio49 = GPIO_LEVEL_LOW, + .gpio50 = GPIO_LEVEL_HIGH, + .gpio51 = GPIO_LEVEL_HIGH, + .gpio52 = GPIO_LEVEL_HIGH, + .gpio53 = GPIO_LEVEL_HIGH, + .gpio54 = GPIO_LEVEL_HIGH, + .gpio55 = GPIO_LEVEL_HIGH, + .gpio60 = GPIO_LEVEL_HIGH, + .gpio61 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, + .gpio65 = GPIO_MODE_NATIVE, + .gpio66 = GPIO_MODE_GPIO, + .gpio67 = GPIO_MODE_GPIO, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_NATIVE, + .gpio71 = GPIO_MODE_NATIVE, + .gpio72 = GPIO_MODE_NATIVE, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_GPIO, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio66 = GPIO_DIR_OUTPUT, + .gpio67 = GPIO_DIR_INPUT, + .gpio68 = GPIO_DIR_OUTPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio74 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio66 = GPIO_LEVEL_LOW, + .gpio68 = GPIO_LEVEL_LOW, + .gpio74 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/samsung/350v5c/hda_verb.c b/src/mainboard/samsung/350v5c/hda_verb.c new file mode 100644 index 0000000..d05fc02 --- /dev/null +++ b/src/mainboard/samsung/350v5c/hda_verb.c @@ -0,0 +1,76 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + 0x10ec0269, /* Codec Vendor / Device ID: Realtek */ + 0x144dc0d8, /* Subsystem ID */ + + 0x0000000b, /* Number of 4 dword sets */ + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x0, 0x144dc0d8), + + /* NID 0x12. */ + AZALIA_PIN_CFG(0x0, 0x12, 0x411111f0), + + /* NID 0x14. */ + AZALIA_PIN_CFG(0x0, 0x14, 0x90170110), + + /* NID 0x15. */ + AZALIA_PIN_CFG(0x0, 0x15, 0x0421101f), + + /* NID 0x17. */ + AZALIA_PIN_CFG(0x0, 0x17, 0x411111f0), + + /* NID 0x18. */ + AZALIA_PIN_CFG(0x0, 0x18, 0x04a11820), + + /* NID 0x19. */ + AZALIA_PIN_CFG(0x0, 0x19, 0x90a7092f), + + /* NID 0x1a. */ + AZALIA_PIN_CFG(0x0, 0x1a, 0x411111f0), + + /* NID 0x1b. */ + AZALIA_PIN_CFG(0x0, 0x1b, 0x411111f0), + + /* NID 0x1d. */ + AZALIA_PIN_CFG(0x0, 0x1d, 0x4005822d), + + /* NID 0x1e. */ + AZALIA_PIN_CFG(0x0, 0x1e, 0x411111f0), + 0x80862806, /* Codec Vendor / Device ID: Intel */ + 0x144dc0d8, /* Subsystem ID */ + + 0x00000004, /* Number of 4 dword sets */ + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x3, 0x144dc0d8), + + /* NID 0x05. */ + AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), + + /* NID 0x06. */ + AZALIA_PIN_CFG(0x3, 0x06, 0x58560020), + + /* NID 0x07. */ + AZALIA_PIN_CFG(0x3, 0x07, 0x58560030), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/samsung/350v5c/mainboard.c b/src/mainboard/samsung/350v5c/mainboard.c new file mode 100644 index 0000000..44f4fa4 --- /dev/null +++ b/src/mainboard/samsung/350v5c/mainboard.c @@ -0,0 +1,50 @@ +#include <device/device.h> +#include <drivers/intel/gma/int15.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <ec/acpi/ec.h> +#include <console/console.h> +#include <pc80/keyboard.h> + +static void mainboard_init(struct device *dev) +{ + /* FIXME: trim this down or remove if necessary */ + { + int i; + const u8 dmp[256] = { + /* 00 */ 0x00, 0x00, 0x01, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 10 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 20 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 30 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 40 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 50 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 60 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 70 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 80 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 90 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* a0 */ 0x00, 0x04, 0x00, 0x84, 0xc1, 0x00, 0x00, 0x61, 0x64, 0x00, 0x00, 0x08, 0x64, 0x19, 0x00, 0xd8, + /* b0 */ 0x00, 0x00, 0xff, 0x33, 0x01, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x0f, 0x00, 0x4b, 0x00, 0x00, + /* c0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* d0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* e0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* f0 */ 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + }; + + printk(BIOS_DEBUG, "Replaying EC dump ..."); + for (i = 0; i < 256; i++) + ec_write (i, dmp[i]); + printk(BIOS_DEBUG, "done\n"); + } + pc_keyboard_init(NO_AUX_DEVICE); +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->init = mainboard_init; + + /* FIXME: fix those values*/ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/samsung/350v5c/romstage.c b/src/mainboard/samsung/350v5c/romstage.c new file mode 100644 index 0000000..860b045 --- /dev/null +++ b/src/mainboard/samsung/350v5c/romstage.c @@ -0,0 +1,82 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdint.h> +#include <string.h> +#include <lib.h> +#include <timestamp.h> +#include <arch/byteorder.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <arch/acpi.h> +#include <console/console.h> +#include "northbridge/intel/sandybridge/sandybridge.h" +#include "northbridge/intel/sandybridge/raminit_native.h" +#include "southbridge/intel/bd82x6x/pch.h" +#include <southbridge/intel/common/gpio.h> +#include <arch/cpu.h> +#include <cpu/x86/msr.h> + +void pch_enable_lpc(void) +{ + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3c00); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x84, 0x00040069); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x88, 0x0004fd61); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x8c, 0x00000000); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x90, 0x00000000); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0000); +} + +void mainboard_rcba_config(void) +{ +} + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 1, 0 }, + { 1, 1, 0 }, + { 1, 1, 1 }, + { 1, 1, 1 }, + { 0, 0, 2 }, + { 0, 0, 2 }, + { 0, 0, 3 }, + { 0, 0, 3 }, + { 1, 1, 4 }, + { 1, 1, 4 }, + { 0, 0, 5 }, + { 1, 0, 5 }, + { 0, 0, 6 }, + { 0, 0, 6 }, +}; + +void mainboard_early_init(int s3resume) +{ +} + +void mainboard_config_superio(void) +{ +} + +/* FIXME: Put proper SPD map here. */ +void mainboard_get_spd(spd_raw_data *spd, bool id_only) +{ + read_spd(&spd[0], 0x50, id_only); + read_spd(&spd[1], 0x51, id_only); + read_spd(&spd[2], 0x52, id_only); + read_spd(&spd[3], 0x53, id_only); +} -- To view, visit https://review.coreboot.org/c/coreboot/+/30942 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I64fcf931938fb3b158b9576b787f452bf6077843 Gerrit-Change-Number: 30942 Gerrit-PatchSet: 1 Gerrit-Owner: Kacper Słomiński <kacper.slominski72(a)gmail.com> Gerrit-MessageType: newchange

6 25

Change in ...coreboot[master]: mb/gigabyte: add GA-P67A-UD3R
by James (Code Review) June 8, 2024

June 8, 2024

James has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31363 Change subject: mb/gigabyte: add GA-P67A-UD3R ...................................................................... mb/gigabyte: add GA-P67A-UD3R This is a Intel P67 chipset motherboard for Sandy Bridge processors. The P67 chipset has no graphics support. This board has redundant 4MB SOIC-8 flash chips, and flashrom is usable with the vendor BIOS. This is an original P67 chipset, and is affected by a SATA 2 hardware bug. There is a variant P67A-UD3R-B3 that is unaffected. The function of PCIe ports PCIEX4 and PCIEX1_* are configured in PCHSTRP9. By default, PCIEX4 is configured for 4 lanes and PCIEX1_* are disabled. This can be switched to 1 lane for all ports. Tested and working: - Intel Core i7 2600 - 4 DIMMs (4x4GB DDR3) - Booting Linux (SeaBIOS) - Native RAM init - PCIe graphics - Onboard Ethernet - Sensors (SuperIO) - S3 sleep - S4 hibernate - SATA 3 - USB 2.0 - USB 3.0 - Onboard audio (speakers, headphones) - CMOS - EHCI debug port - Serial port Not tested: - SATA 2 - PS/2 keyboard/mouse - Digital audio Change-Id: I4fbf50376be3184bf01a3bc8aae09bce54676707 Signed-off-by: James Ye <jye836(a)gmail.com> --- A src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig A src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig.name A src/mainboard/gigabyte/ga-p67a-ud3r/Makefile.inc A src/mainboard/gigabyte/ga-p67a-ud3r/acpi/ec.asl A src/mainboard/gigabyte/ga-p67a-ud3r/acpi/mainboard.asl A src/mainboard/gigabyte/ga-p67a-ud3r/acpi/platform.asl A src/mainboard/gigabyte/ga-p67a-ud3r/acpi/superio.asl A src/mainboard/gigabyte/ga-p67a-ud3r/acpi_tables.c A src/mainboard/gigabyte/ga-p67a-ud3r/board_info.txt A src/mainboard/gigabyte/ga-p67a-ud3r/cmos.default A src/mainboard/gigabyte/ga-p67a-ud3r/cmos.layout A src/mainboard/gigabyte/ga-p67a-ud3r/devicetree.cb A src/mainboard/gigabyte/ga-p67a-ud3r/dsdt.asl A src/mainboard/gigabyte/ga-p67a-ud3r/gpio.c A src/mainboard/gigabyte/ga-p67a-ud3r/hda_verb.c A src/mainboard/gigabyte/ga-p67a-ud3r/romstage.c 16 files changed, 781 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/63/31363/1 diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig b/src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig new file mode 100644 index 0000000..c1efe12 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig @@ -0,0 +1,40 @@ +if BOARD_GIGABYTE_GA_P67A_UD3R + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_4096 + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select NORTHBRIDGE_INTEL_SANDYBRIDGE + select SERIRQ_CONTINUOUS_MODE + select SOUTHBRIDGE_INTEL_BD82X6X + select USE_NATIVE_RAMINIT + select SUPERIO_ITE_IT8728F + +config MAINBOARD_DIR + string + default "gigabyte/ga-p67a-ud3r" + +config MAINBOARD_PART_NUMBER + string + default "GA-P67A-UD3R" + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0x5001 + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x1458 + +config MAX_CPUS + int + default 8 + +config USBDEBUG_HCD_INDEX + int + default 2 + +endif # BOARD_GIGABYTE_GA_P67A_UD3R diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig.name b/src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig.name new file mode 100644 index 0000000..15f0655 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_GIGABYTE_GA_P67A_UD3R + bool "GA-P67A-UD3R" diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/Makefile.inc b/src/mainboard/gigabyte/ga-p67a-ud3r/Makefile.inc new file mode 100644 index 0000000..3dae61e --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/Makefile.inc @@ -0,0 +1 @@ +romstage-y += gpio.c diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/ec.asl b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/ec.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/ec.asl diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/mainboard.asl b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/mainboard.asl new file mode 100644 index 0000000..34de86f --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/mainboard.asl @@ -0,0 +1,23 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Scope (\_SB) +{ + Device (PWRB) + { + Name (_HID, EisaId("PNP0C0C")) + } +} diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/platform.asl b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/platform.asl new file mode 100644 index 0000000..d8d3320 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/platform.asl @@ -0,0 +1,29 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + Return(Package(){0,0}) +} diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/superio.asl b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/superio.asl new file mode 100644 index 0000000..2b20c77 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/superio.asl @@ -0,0 +1,16 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 James Ye <jye836(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <drivers/pc80/pc/ps2_controller.asl> diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/acpi_tables.c b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi_tables.c new file mode 100644 index 0000000..a2f383b --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi_tables.c @@ -0,0 +1,29 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/bd82x6x/nvs.h> + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; +} diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/board_info.txt b/src/mainboard/gigabyte/ga-p67a-ud3r/board_info.txt new file mode 100644 index 0000000..c6f16ae --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/board_info.txt @@ -0,0 +1,7 @@ +Category: desktop +Board URL: https://www.gigabyte.com/Motherboard/GA-P67A-UD3R-rev-10 +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y +Release year: 2011 diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/cmos.default b/src/mainboard/gigabyte/ga-p67a-ud3r/cmos.default new file mode 100644 index 0000000..60de212 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/cmos.default @@ -0,0 +1,5 @@ +boot_option=Fallback +debug_level=Debug +nmi=Enable +power_on_after_fail=Disable +sata_mode=AHCI diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/cmos.layout b/src/mainboard/gigabyte/ga-p67a-ud3r/cmos.layout new file mode 100644 index 0000000..4e5c0a8 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/cmos.layout @@ -0,0 +1,107 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## Copyright (C) 2014 Vladimir Serbinenko +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +# ----------------------------------------------------------------- +entries + +# ----------------------------------------------------------------- +# Status Register A +# ----------------------------------------------------------------- +# Status Register B +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 3 boot_option +388 4 h 0 reboot_counter + +# ----------------------------------------------------------------- +# coreboot config options: console +#392 3 r 0 unused +395 4 e 4 debug_level +#399 1 r 0 unused + +#400 8 r 0 reserved for century byte + +# coreboot config options: southbridge +#400 1 e 0 unused +408 1 e 1 nmi +409 2 e 5 power_on_after_fail +411 1 e 6 sata_mode + +# coreboot config options: northbridge +#432 3 r 0 unused + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 +960 16 r 0 mrc_scrambler_seed_chk + +# coreboot config options: check sums +984 16 h 0 check_sum + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable + +2 0 Enable +2 1 Disable + +3 0 Fallback +3 1 Normal + +4 0 Emergency +4 1 Alert +4 2 Critical +4 3 Error +4 4 Warning +4 5 Notice +4 6 Info +4 7 Debug +4 8 Spew + +5 0 Disable +5 1 Enable +5 2 Keep + +6 0 AHCI +6 1 Compatible + +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/devicetree.cb b/src/mainboard/gigabyte/ga-p67a-ud3r/devicetree.cb new file mode 100644 index 0000000..4ed458d --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/devicetree.cb @@ -0,0 +1,124 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2019 James Ye <jye836(a)gmail.com> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +# +chip northbridge/intel/sandybridge + device cpu_cluster 0x0 on + chip cpu/intel/model_206ax + device lapic 0x0 on end + + # Magic APIC ID to locate this chip + device lapic 0xacac off end + + register "c1_acpower" = "1" + register "c2_acpower" = "3" + register "c3_acpower" = "5" + + register "c1_battery" = "1" + register "c2_battery" = "3" + register "c3_battery" = "5" + end + end + + device domain 0x0 on + subsystemid 0x1458 0x5001 inherit + + device pci 00.0 on end # Host bridge + device pci 01.0 on # PCIe bridge (PCIEX16) + subsystemid 0x1458 0x5000 + end + device pci 02.0 off end # Internal graphics + + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "sata_port_map" = "0x3f" + register "sata_interface_speed_support" = "0x3" + + register "gen1_dec" = "0x000c0801" + register "gen2_dec" = "0x000c0291" + + register "pcie_port_coalesce" = "0" + register "c2_latency" = "0x0065" + register "p_cnt_throttling_supported" = "1" + + register "spi_lvscc" = "0x2005" + register "spi_uvscc" = "0x2005" + + device pci 16.0 off end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 off end # Intel Gigabit Ethernet + device pci 1a.0 on # USB2 EHCI #2 + subsystemid 0x1458 0x5006 + end + device pci 1b.0 on # High Definition Audio controller + subsystemid 0x1458 0xa102 + end + device pci 1c.0 on end # Unrouted, to disable coalescing + device pci 1c.1 on # PCIe Port #2 + device pci 00.0 on # USB 3.0 controller + subsystemid 0x1458 0x5007 + end + end + device pci 1c.2 on # PCIe Port #3 + device pci 00.0 on # Ethernet controller + subsystemid 0x1458 0xe000 + end + end + device pci 1c.3 on # PCIe Port #4 + device pci 00.0 on # PCI bridge + subsystemid 0x1458 0x5000 + end + end + device pci 1c.4 on end # PCIe Port #5 (PCIEX4) + device pci 1c.5 off end # PCIe Port #6 (PCIEX1_1) + device pci 1c.6 off end # PCIe Port #7 (PCIEX1_2) + device pci 1c.7 off end # PCIe Port #8 (PCIEX1_3) + device pci 1d.0 on # USB2 EHCI #1 + subsystemid 0x1458 0x5006 + end + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on # LPC bridge + chip superio/ite/it8728f + device pnp 2e.0 off end # Floppy, not routed + device pnp 2e.1 on # COM1 + io 0x60 = 0x03f8 + irq 0x70 = 4 + end + device pnp 2e.2 off end # COM2, not routed + device pnp 2e.3 off end # Parallel port, not rounted + device pnp 2e.4 on # Environment Controller + io 0x60 = 0x0290 + io 0x62 = 0x0 + irq 0x70 = 0 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 off end # Mouse + device pnp 2e.7 off end # GPIO + device pnp 2e.a off end # CIR, not routed + end + end + device pci 1f.2 on # SATA Controller 1 + subsystemid 0x1458 0xb005 + end + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # SATA Controller 2 + device pci 1f.6 off end # Thermal + end + end +end diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/dsdt.asl b/src/mainboard/gigabyte/ga-p67a-ud3r/dsdt.asl new file mode 100644 index 0000000..365a0fa --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/dsdt.asl @@ -0,0 +1,45 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 James Ye <jye836(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/acpi.h> +DefinitionBlock ( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI 2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20141018 // OEM revision +) +{ + // Some generic macros + #include "acpi/mainboard.asl" + #include "acpi/platform.asl" + #include "acpi/superio.asl" + #include <cpu/intel/common/acpi/cpu.asl> + #include <southbridge/intel/bd82x6x/acpi/platform.asl> + + // Global NVS and variables + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + + // Chipset specific sleep states + #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> + + Device (\_SB.PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <drivers/intel/gma/acpi/default_brightness_levels.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } +} diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/gpio.c b/src/mainboard/gigabyte/ga-p67a-ud3r/gpio.c new file mode 100644 index 0000000..c65f432 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/gpio.c @@ -0,0 +1,204 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * Copyright (C) 2019 James Ye <jye836(a)gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_NATIVE, + .gpio3 = GPIO_MODE_NATIVE, + .gpio4 = GPIO_MODE_NATIVE, + .gpio5 = GPIO_MODE_NATIVE, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_NATIVE, + .gpio11 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_NATIVE, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_GPIO, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_NATIVE, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_INPUT, + .gpio31 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio8 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_LOW, + .gpio24 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { + .gpio24 = GPIO_RESET_RSMRST, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio11 = GPIO_INVERT, + .gpio13 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_GPIO, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_NATIVE, + .gpio47 = GPIO_MODE_GPIO, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_NATIVE, + .gpio51 = GPIO_MODE_NATIVE, + .gpio52 = GPIO_MODE_NATIVE, + .gpio53 = GPIO_MODE_NATIVE, + .gpio54 = GPIO_MODE_NATIVE, + .gpio55 = GPIO_MODE_NATIVE, + .gpio56 = GPIO_MODE_NATIVE, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_NATIVE, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_OUTPUT, + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_INPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio47 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_LOW, + .gpio33 = GPIO_LEVEL_HIGH, + .gpio35 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, + .gpio65 = GPIO_MODE_NATIVE, + .gpio66 = GPIO_MODE_NATIVE, + .gpio67 = GPIO_MODE_NATIVE, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_NATIVE, + .gpio71 = GPIO_MODE_NATIVE, + .gpio72 = GPIO_MODE_GPIO, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_NATIVE, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio72 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/hda_verb.c b/src/mainboard/gigabyte/ga-p67a-ud3r/hda_verb.c new file mode 100644 index 0000000..a843a2b --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/hda_verb.c @@ -0,0 +1,74 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * Copyright (C) 2019 James Ye <jye836(a)gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + 0x10ec0892, /* Codec Vendor / Device ID: Realtek */ + 0x1458a022, /* Subsystem ID */ + + 15, /* Number of 4 dword sets */ + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x2, 0x1458a022), + + /* NID 0x11. */ + AZALIA_PIN_CFG(0x2, 0x11, 0x99430140), + + /* NID 0x12. */ + AZALIA_PIN_CFG(0x2, 0x12, 0x411111f0), + + /* NID 0x14. */ + AZALIA_PIN_CFG(0x2, 0x14, 0x01014410), + + /* NID 0x15. */ + AZALIA_PIN_CFG(0x2, 0x15, 0x01011412), + + /* NID 0x16. */ + AZALIA_PIN_CFG(0x2, 0x16, 0x01016411), + + /* NID 0x17. */ + AZALIA_PIN_CFG(0x2, 0x17, 0x01012414), + + /* NID 0x18. */ + AZALIA_PIN_CFG(0x2, 0x18, 0x01a19c50), + + /* NID 0x19. */ + AZALIA_PIN_CFG(0x2, 0x19, 0x02a19c60), + + /* NID 0x1a. */ + AZALIA_PIN_CFG(0x2, 0x1a, 0x0181345f), + + /* NID 0x1b. */ + AZALIA_PIN_CFG(0x2, 0x1b, 0x02214c20), + + /* NID 0x1c. */ + AZALIA_PIN_CFG(0x2, 0x1c, 0x593301f0), + + /* NID 0x1d. */ + AZALIA_PIN_CFG(0x2, 0x1d, 0x4005e601), + + /* NID 0x1e. */ + AZALIA_PIN_CFG(0x2, 0x1e, 0x014b6130), + + /* NID 0x1f. */ + AZALIA_PIN_CFG(0x2, 0x1f, 0x411111f0), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/romstage.c b/src/mainboard/gigabyte/ga-p67a-ud3r/romstage.c new file mode 100644 index 0000000..3037b73 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/romstage.c @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * Copyright (C) 2019 James Ye <jye836(a)gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <northbridge/intel/sandybridge/raminit_native.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <superio/ite/common/ite.h> +#include <superio/ite/it8728f/it8728f.h> + +#define SUPERIO_BASE 0x2e +#define SUPERIO_GPIO PNP_DEV(SUPERIO_BASE, IT8728F_GPIO) +#define SERIAL_DEV PNP_DEV(SUPERIO_BASE, 0x01) + +void pch_enable_lpc(void) +{ + pci_write_config16(PCH_LPC_DEV, LPC_EN, KBC_LPC_EN | CNF1_LPC_EN | + CNF2_LPC_EN | COMA_LPC_EN); +} + +void mainboard_rcba_config(void) +{ +} + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 1, 0 }, + { 1, 1, 0 }, + { 1, 1, 1 }, + { 1, 1, 1 }, + { 1, 6, 2 }, + { 1, 6, 2 }, + { 1, 6, 3 }, + { 1, 5, 3 }, + { 1, 5, 4 }, + { 1, 5, 4 }, + { 1, 5, 5 }, + { 1, 5, 5 }, + { 1, 5, 6 }, + { 1, 5, 6 }, +}; + +void mainboard_early_init(int s3resume) +{ +} + +void mainboard_config_superio(void) +{ + /* Enable serial port */ + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + /* Disable SIO WDT which kicks in DualBIOS */ + ite_reg_write(SUPERIO_GPIO, 0xEF, 0x7E); +} + +void mainboard_get_spd(spd_raw_data *spd, bool id_only) +{ + read_spd(&spd[0], 0x50, id_only); + read_spd(&spd[1], 0x51, id_only); + read_spd(&spd[2], 0x52, id_only); + read_spd(&spd[3], 0x53, id_only); +} -- To view, visit https://review.coreboot.org/c/coreboot/+/31363 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I4fbf50376be3184bf01a3bc8aae09bce54676707 Gerrit-Change-Number: 31363 Gerrit-PatchSet: 1 Gerrit-Owner: James <jye836(a)gmail.com> Gerrit-MessageType: newchange

6 24

Change in ...coreboot[master]: mb/*/romstage: Drop defines already set by raminit code
by Patrick Rudolph (Code Review) Aug. 7, 2023

Aug. 7, 2023

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32070 Change subject: mb/*/romstage: Drop defines already set by raminit code ...................................................................... mb/*/romstage: Drop defines already set by raminit code Drop defines that are set by raminit code. Change-Id: Ica844a70b50486b4db3744cb123b3e4b8d5bedb0 Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M src/mainboard/asrock/h81m-hds/romstage.c M src/mainboard/google/beltino/romstage.c M src/mainboard/google/butterfly/romstage.c M src/mainboard/google/link/romstage.c M src/mainboard/google/parrot/romstage.c M src/mainboard/google/slippy/variants/falco/romstage.c M src/mainboard/google/slippy/variants/leon/romstage.c M src/mainboard/google/slippy/variants/peppy/romstage.c M src/mainboard/google/slippy/variants/wolf/romstage.c M src/mainboard/google/stout/romstage.c M src/mainboard/intel/dcp847ske/romstage.c M src/mainboard/intel/emeraldlake2/romstage.c M src/mainboard/kontron/ktqm77/romstage.c M src/mainboard/lenovo/x220/romstage.c M src/mainboard/roda/rv11/variants/rv11/romstage.c M src/mainboard/roda/rv11/variants/rw11/romstage.c M src/mainboard/samsung/lumpy/romstage.c M src/mainboard/samsung/stumpy/romstage.c M src/mainboard/supermicro/x10slm-f/romstage.c 19 files changed, 0 insertions(+), 265 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/70/32070/1 diff --git a/src/mainboard/asrock/h81m-hds/romstage.c b/src/mainboard/asrock/h81m-hds/romstage.c index a917722..68ed658 100644 --- a/src/mainboard/asrock/h81m-hds/romstage.c +++ b/src/mainboard/asrock/h81m-hds/romstage.c @@ -74,20 +74,6 @@ { struct pei_data pei_data = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, - .system_type = 1, /* desktop/server */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0x00, 0xa4, 0x00 }, .ec_present = 0, .dimm_channel0_disabled = 2, /* Disable DIMM 1 on channel 0. */ diff --git a/src/mainboard/google/beltino/romstage.c b/src/mainboard/google/beltino/romstage.c index 70a8c19..6417f0d 100644 --- a/src/mainboard/google/beltino/romstage.c +++ b/src/mainboard/google/beltino/romstage.c @@ -71,20 +71,6 @@ { struct pei_data pei_data = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, - .system_type = 5, /* ULT */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0x00, 0xa4, 0x00 }, .ec_present = 0, // 0 = leave channel enabled diff --git a/src/mainboard/google/butterfly/romstage.c b/src/mainboard/google/butterfly/romstage.c index d34b1e4..cbd9f3d 100644 --- a/src/mainboard/google/butterfly/romstage.c +++ b/src/mainboard/google/butterfly/romstage.c @@ -132,20 +132,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xA0, 0x00,0xA4,0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/google/link/romstage.c b/src/mainboard/google/link/romstage.c index 66a503d0..6617dc4 100644 --- a/src/mainboard/google/link/romstage.c +++ b/src/mainboard/google/link/romstage.c @@ -127,20 +127,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, .ddr3lv_support = 1, diff --git a/src/mainboard/google/parrot/romstage.c b/src/mainboard/google/parrot/romstage.c index 76a4b4b..d76d814 100644 --- a/src/mainboard/google/parrot/romstage.c +++ b/src/mainboard/google/parrot/romstage.c @@ -101,20 +101,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xA0, 0x00,0xA4,0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/google/slippy/variants/falco/romstage.c b/src/mainboard/google/slippy/variants/falco/romstage.c index 25f8d27..2244119 100644 --- a/src/mainboard/google/slippy/variants/falco/romstage.c +++ b/src/mainboard/google/slippy/variants/falco/romstage.c @@ -109,20 +109,6 @@ { struct pei_data pei_data = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, - .system_type = 5, /* ULT */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xff, 0x00, 0xff, 0x00 }, .ec_present = 1, // 0 = leave channel enabled diff --git a/src/mainboard/google/slippy/variants/leon/romstage.c b/src/mainboard/google/slippy/variants/leon/romstage.c index b95c6e1..35345d0 100644 --- a/src/mainboard/google/slippy/variants/leon/romstage.c +++ b/src/mainboard/google/slippy/variants/leon/romstage.c @@ -106,20 +106,6 @@ { struct pei_data pei_data = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, - .system_type = 5, /* ULT */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xff, 0x00, 0xff, 0x00 }, .ec_present = 1, // 0 = leave channel enabled diff --git a/src/mainboard/google/slippy/variants/peppy/romstage.c b/src/mainboard/google/slippy/variants/peppy/romstage.c index e47edc7..a5de6c0 100644 --- a/src/mainboard/google/slippy/variants/peppy/romstage.c +++ b/src/mainboard/google/slippy/variants/peppy/romstage.c @@ -124,20 +124,6 @@ { struct pei_data pei_data = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, - .system_type = 5, /* ULT */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xff, 0x00, 0xff, 0x00 }, .ec_present = 1, // 0 = leave channel enabled diff --git a/src/mainboard/google/slippy/variants/wolf/romstage.c b/src/mainboard/google/slippy/variants/wolf/romstage.c index 3125efe..5a8c972 100644 --- a/src/mainboard/google/slippy/variants/wolf/romstage.c +++ b/src/mainboard/google/slippy/variants/wolf/romstage.c @@ -111,20 +111,7 @@ { struct pei_data pei_data = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, .system_type = 5, /* ULT */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xff, 0x00, 0xff, 0x00 }, .ec_present = 1, // 0 = leave channel enabled diff --git a/src/mainboard/google/stout/romstage.c b/src/mainboard/google/stout/romstage.c index 7539dd7..6e32145 100644 --- a/src/mainboard/google/stout/romstage.c +++ b/src/mainboard/google/stout/romstage.c @@ -137,20 +137,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xA0, 0x00,0xA4,0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/intel/dcp847ske/romstage.c b/src/mainboard/intel/dcp847ske/romstage.c index 24ec912..2043cf6 100644 --- a/src/mainboard/intel/dcp847ske/romstage.c +++ b/src/mainboard/intel/dcp847ske/romstage.c @@ -29,20 +29,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0x00, 0xa2, 0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 0, diff --git a/src/mainboard/intel/emeraldlake2/romstage.c b/src/mainboard/intel/emeraldlake2/romstage.c index 9a9fc24..8cd7ec2 100644 --- a/src/mainboard/intel/emeraldlake2/romstage.c +++ b/src/mainboard/intel/emeraldlake2/romstage.c @@ -94,20 +94,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0x00, 0xa4, 0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 0, diff --git a/src/mainboard/kontron/ktqm77/romstage.c b/src/mainboard/kontron/ktqm77/romstage.c index f778f96..e0f8954 100644 --- a/src/mainboard/kontron/ktqm77/romstage.c +++ b/src/mainboard/kontron/ktqm77/romstage.c @@ -80,20 +80,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, /* 0 Mobile, 1 Desktop/Server */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xA0, 0x00,0xA4,0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/lenovo/x220/romstage.c b/src/mainboard/lenovo/x220/romstage.c index a5b0c81..d398d81 100644 --- a/src/mainboard/lenovo/x220/romstage.c +++ b/src/mainboard/lenovo/x220/romstage.c @@ -50,20 +50,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0x00,0xa2,0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/roda/rv11/variants/rv11/romstage.c b/src/mainboard/roda/rv11/variants/rv11/romstage.c index 685e942..df679f1 100644 --- a/src/mainboard/roda/rv11/variants/rv11/romstage.c +++ b/src/mainboard/roda/rv11/variants/rv11/romstage.c @@ -37,20 +37,6 @@ { const struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xA0, 0x00, 0xA4, 0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/roda/rv11/variants/rw11/romstage.c b/src/mainboard/roda/rv11/variants/rw11/romstage.c index 97d9d2b..56ac32c 100644 --- a/src/mainboard/roda/rv11/variants/rw11/romstage.c +++ b/src/mainboard/roda/rv11/variants/rw11/romstage.c @@ -66,20 +66,6 @@ { const struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xA0, 0xA2, 0xA4, 0xA6 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/samsung/lumpy/romstage.c b/src/mainboard/samsung/lumpy/romstage.c index 1080689..29fe08b 100644 --- a/src/mainboard/samsung/lumpy/romstage.c +++ b/src/mainboard/samsung/lumpy/romstage.c @@ -156,20 +156,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0x00,0x00,0x00 }, .ts_addresses = { 0x30, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/samsung/stumpy/romstage.c b/src/mainboard/samsung/stumpy/romstage.c index a8e28d6..510efbe 100644 --- a/src/mainboard/samsung/stumpy/romstage.c +++ b/src/mainboard/samsung/stumpy/romstage.c @@ -144,20 +144,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0x00,0xa4,0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 0, diff --git a/src/mainboard/supermicro/x10slm-f/romstage.c b/src/mainboard/supermicro/x10slm-f/romstage.c index 84ad047..702e8bb 100644 --- a/src/mainboard/supermicro/x10slm-f/romstage.c +++ b/src/mainboard/supermicro/x10slm-f/romstage.c @@ -66,20 +66,6 @@ { struct pei_data pei_data = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, - .system_type = 1, /* desktop/server */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0xa2, 0xa4, 0xa6 }, .ec_present = 0, .ddr_refresh_2x = 1, -- To view, visit https://review.coreboot.org/c/coreboot/+/32070 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ica844a70b50486b4db3744cb123b3e4b8d5bedb0 Gerrit-Change-Number: 32070 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

4 13