April 2019 - coreboot-gerrit - mail.coreboot.org

Change in ...coreboot[master]: SeaBIOS - unofficial patches: advanced_bootmenu and multiple_floppies
by mikeb mikeb (Code Review) June 12, 2025

June 12, 2025

Hello Mike Banon, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/32351 to review the following change. Change subject: SeaBIOS - unofficial patches: advanced_bootmenu and multiple_floppies ...................................................................... SeaBIOS - unofficial patches: advanced_bootmenu and multiple_floppies If you'd like to add the useful floppies to your coreboot (read about them at http://dangerousprototypes.com/docs/Lenovo_G505S_hacking#Useful_floppies ), or to use your USB numpad for choosing a SeaBIOS boot entry, then this change is for you! It contains two valuable patches together with a Makefile mod needed to automatically apply these patches to a cloned SeaBIOS before its' compilation. advanced_bootmenu: up to 35 entries (2 pages if >18), numpad support (console) https://mail.coreboot.org/hyperkitty/list/seabios@seabios.org/thread/CKWLNT… [PATCH v2] ramdisk: search for all available floppy images instead of one https://mail.coreboot.org/pipermail/seabios/2018-December/012670.html Patch descriptions are available at these links, and just in case here's a copy: advanced_bootmenu: up to 35 entries (2 pages if >18), numpad support (console) Add support for up to 35 boot menu entries (2 pages if >18). To solve the ">10" problem currently experienced by SeaBIOS users (there are no 11, 12, etc. keys on a keyboard - so impossible to choose the last menu entries if you got >10 entries because of multiple hard drives / secondary payloads / floppies) - the boot menu has been extended to the letter keys. NOTE: TPM menu has been moved from T to M letter: it is at the end of keyboard's 3rd row of letters and "Trusted" is adjective while "Module" is a noun; alternatively could press '-'. Also, add support for a numpad. Small USB numpad could be really convenient for choosing the boot entries at coreboot boards used as (maybe headless) servers. '/' char on numpad could be used to open the boot menu or to exit it. If there are >10 boot menu entries - the numpad console interface will be enabled: press one or two digit keys and then ENTER to confirm your choice, or remove a digit by pressing the '.Del' key. Also you could call TPM with '-' key at any moment, or boot with a single key press of your fullsize keyboard. [PATCH v2] ramdisk: search for all available floppy images instead of one All the floppy images available at CBFS will be found and listed in a boot menu, instead of the first found. Could be highly valuable if you are participating in a hobby OS development - would like to test multiple versions of your floppy at the same coreboot image, to reduce the amount of re-flashes and accelerate the development at bare metal - or simply you would like to access multiple floppies as a coreboot user. For example: KolibriOS (nice assembly OS with GUI and apps), FreeDOS, MichalOS, Snowdrop and memtest (coreboot's memtest version is buggy, e.g. external USB keyboard isn't working at some laptops; floppy is much better) Signed-off-by: Mike Banon <mikebdp2(a)gmail.com> Change-Id: Idf4efba31091a8678b51c2f6541d440c5cc6d37d --- M payloads/external/SeaBIOS/Makefile A payloads/external/SeaBIOS/advanced_bootmenu.patch A payloads/external/SeaBIOS/multiple_floppies.patch 3 files changed, 551 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/51/32351/1 diff --git a/payloads/external/SeaBIOS/Makefile b/payloads/external/SeaBIOS/Makefile index e505c8c..ae58c8c 100644 --- a/payloads/external/SeaBIOS/Makefile +++ b/payloads/external/SeaBIOS/Makefile @@ -76,7 +76,18 @@ # echo "# CONFIG_SMBIOS is not set" >> seabios/.config $(MAKE) -C seabios olddefconfig OUT=out/ -build: config +patch: + if [ -d seabios ]; then \ + cd seabios; \ + if [ ! -f .patched ]; then \ + echo " PATCH SeaBIOS $(TAG-y)"; \ + patch -p1 < ./../advanced_bootmenu.patch; \ + patch -p1 < ./../multiple_floppies.patch; \ + touch .patched; \ + fi; \ + fi + +build: config patch echo " MAKE SeaBIOS $(TAG-y)" $(MAKE) -C seabios OUT=out/ diff --git a/payloads/external/SeaBIOS/advanced_bootmenu.patch b/payloads/external/SeaBIOS/advanced_bootmenu.patch new file mode 100644 index 0000000..c914588 --- /dev/null +++ b/payloads/external/SeaBIOS/advanced_bootmenu.patch @@ -0,0 +1,332 @@ +diff --git a/src/boot.c b/src/boot.c +index 9f82f3c..f94dd27 100644 +--- a/src/boot.c ++++ b/src/boot.c +@@ -463,6 +463,7 @@ get_keystroke(int msec) + * Boot menu and BCV execution + ****************************************************************/ + ++#define BOOTMENU_PAGE_SIZE 18 + #define DEFAULT_BOOTMENU_WAIT 2500 + + // Show IPL option menu. +@@ -478,59 +479,282 @@ interactive_bootmenu(void) + ; + + char *bootmsg = romfile_loadfile("etc/boot-menu-message", NULL); +- int menukey = romfile_loadint("etc/boot-menu-key", 1); +- printf("%s", bootmsg ?: "\nPress ESC for boot menu.\n\n"); ++ int menukey = romfile_loadint("etc/boot-menu-key", 1); // custom menukey ++ printf("%s", bootmsg ?: "\nPress ESC or \\ / slash for boot menu.\n\n"); + free(bootmsg); + + u32 menutime = romfile_loadint("etc/boot-menu-wait", DEFAULT_BOOTMENU_WAIT); + enable_bootsplash(); + int scan_code = get_keystroke(menutime); + disable_bootsplash(); +- if (scan_code != menukey) ++ if (scan_code != menukey && // custom menukey ++ scan_code != 1 && // ESC ++ scan_code != 43 && // '\' char on keyboard ++ scan_code != 53 && // '/' char on keyboard ++ scan_code != 98) { // '/' char on numpad ++ if (scan_code == -1) ++ printf("No key pressed.\n"); ++ else ++ printf("Not a menukey pressed.\n"); + return; ++ } + + while (get_keystroke(0) >= 0) + ; + +- printf("Select boot device:\n\n"); + wait_threads(); + +- // Show menu items ++ char keyboard_keys[35] = {'1','2','3','4','5','6','7','8','9','0', ++ 'q','w','e','r','t','y','u','i','o','p', ++ 'a','s','d','f','g','h','j','k','l', ++ 'z','x','c','v','b','n'}; /* m = TPM */ ++ int numpad_scancodes[10] = { 82, 79, 80, 81, 75, 76, 77, 71, 72, 73 }; ++ int numpi = 0; // Key index: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9. ++ int digits = 0; // Numerical length of a current choice number. ++ int decode = 0; // Decode the current choice number into a letter? ++ int entry_id = 0; ++ char desc[77]; ++ ++ printf("Select boot device"); ++ ++ // Show menu items after counting them and determining a number of pages. ++ // Only 35 boot menu items (36 if to count a TPM) are supported currently. ++ + int maxmenu = 0; + struct bootentry_s *pos; +- hlist_for_each_entry(pos, &BootList, node) { +- char desc[77]; ++ hlist_for_each_entry(pos, &BootList, node) + maxmenu++; +- printf("%d. %s\n", maxmenu ++ ++ if (maxmenu > 10) { ++ if (maxmenu > 35) ++ maxmenu = 35; ++ if (maxmenu > BOOTMENU_PAGE_SIZE) ++ printf(" - page 1 :"); ++ else ++ printf(": "); ++ printf(" // press ENTER after your numpad input"); ++ if (maxmenu > BOOTMENU_PAGE_SIZE) ++ printf(" - if any -\n " ++ " // - or to switch between the pages...\n"); ++ else ++ printf(" (if any)\n\n"); ++ } else { ++ printf(":\n\n"); ++ } ++ ++ hlist_for_each_entry(pos, &BootList, node) { ++ if (entry_id == BOOTMENU_PAGE_SIZE) // Show only the first page. ++ break; ++ printf("%c. %s\n", keyboard_keys[entry_id] + , strtcpy(desc, pos->description, ARRAY_SIZE(desc))); ++ entry_id++; + } ++ int tpm_cshm = 0; + if (tpm_can_show_menu()) { +- printf("\nt. TPM Configuration\n"); ++ tpm_cshm = 1; ++ printf("\nm-. TPM Configuration"); + } +- +- // Get key press. If the menu key is ESC, do not restart boot unless +- // 1.5 seconds have passed. Otherwise users (trained by years of +- // repeatedly hitting keys to enter the BIOS) will end up hitting ESC +- // multiple times and immediately booting the primary boot device. +- int esc_accepted_time = irqtimer_calc(menukey == 1 ? 1500 : 0); ++ printf("\n> "); ++ ++ // Do not restart boot on menukey press, unless DEFAULT_BOOTMENU_WAIT msecs ++ // have passed. Otherwise users (trained by years of repeatedly hitting keys ++ // to enter the BIOS) will end up hitting menukey multiple times and ++ // immediately booting the primary boot device. ++ int esc_accepted_time = irqtimer_calc(DEFAULT_BOOTMENU_WAIT); ++ int choice = 0, kb_choice = 0; ++ int page_num = 1; ++ int enter = 0; ++ int backspace = 0; ++ int tpm_show_menu = 0; + for (;;) { + scan_code = get_keystroke(1000); +- if (scan_code == 1 && !irqtimer_check(esc_accepted_time)) +- continue; +- if (tpm_can_show_menu() && scan_code == 20 /* t */) { ++ if (scan_code == menukey || // custom menukey ++ scan_code == 1 || // ESC ++ scan_code == 43 || // '\' char on keyboard ++ scan_code == 53 || // '/' char on keyboard ++ scan_code == 98) { // '/' char on numpad ++ if (!irqtimer_check(esc_accepted_time)) ++ continue; ++ if (digits == 2) // Remove the decoded "(*)" ++ printf(" \b\b\b"); ++ /* Remove the existing input before printing a message. */ ++ for (; digits > 0; digits--) ++ printf("\b \b"); ++ printf("Menukey pressed.\n"); ++ return; ++ } ++ kb_choice = 0; ++ /* 4 rows of keyboard_keys: 1 row with numbers, 3 rows with letters. ++ Use any of them to select a boot device (except the TPM 'm-' keys) */ ++ // 1st range: 1-9 and 0 (10) keys <==> 2-11 scan codes <==> 1-10 choice ++ if (scan_code >= 2 && scan_code <= 11) kb_choice = scan_code - 1; ++ // 2nd range: Q-P row of letters <==> 16-25 scan codes <==> 11-20 choice ++ if (scan_code >= 16 && scan_code <= 25) kb_choice = scan_code - 5; ++ // 3rd range: A-L row of letters <==> 30-38 scan codes <==> 21-29 choice ++ if (scan_code >= 30 && scan_code <= 38) kb_choice = scan_code - 9; ++ // 4th range: Z-N row of letters <==> 44-49 scan codes <==> 30-35 choice ++ if (scan_code >= 44 && scan_code <= 49) kb_choice = scan_code - 14; ++ // ENTER: (28) on keyboard, (96) on numpad. ++ if (scan_code == 28 || scan_code == 96) ++ enter = 1; ++ // BCKSPC: '<-'(14) and 'Delete'(111) on keyboard, '.Del'(83) on numpad. ++ if (scan_code == 14 || scan_code == 111 || scan_code == 83) ++ backspace = 1; ++ // TPM keys: 'm'(50) and '-'(12) chars on keyboard, '-'(74) on numpad. ++ if ((scan_code == 50 || scan_code == 12 || scan_code == 74) && tpm_cshm) ++ tpm_show_menu = 1; ++ ++ if (kb_choice != 0 || tpm_show_menu) { ++ if (kb_choice > maxmenu) { ++ if (!tpm_show_menu) ++ continue; ++ } else { ++ choice = kb_choice; ++ } ++ if (digits == 2) // Remove the decoded "(*)" ++ printf(" \b\b\b"); ++ /* Remove the existing input before printing a choice. */ ++ for (; digits > 0; digits--) ++ printf("\b \b"); ++ if (!tpm_show_menu) { ++ // Choice is any of the detected boot devices ==> lets boot! ++ break; ++ } ++ } else { ++ // Internal/USB Numpad console interface. ++ if (digits < 9) { ++ for (numpi = 0; numpi < 10; numpi++) { ++ if (scan_code == numpad_scancodes[numpi]) { ++ if (maxmenu <= 10) { // Console interface is not needed. ++ if ((numpi != 0 && numpi <= maxmenu) || ++ (numpi == 0 && 10 <= maxmenu)) { // 10(0) ++ choice = numpi; ++ enter = 1; // Fake ENTER to boot this entry now. ++ } else { // If no such an entry, don't try to boot. ++ break; ++ } ++ } else { ++ if (digits == 2) { ++ printf(" \b\b\b"); // Remove the decoded "(*)" ++ if (choice == 0) { ++ printf("\b\b \b\b"); // Remove "10". ++ digits = 0; ++ } ++ } ++ choice = 10 * choice + numpi; ++ } ++ if (choice > 0) { ++ printf("%d", numpi); // Print the entered digit. ++ digits++; ++ } else { ++ if (10 <= maxmenu) ++ printf("10(0)\b\b\b"); ++ else ++ printf("10(?)\b\b\b"); ++ digits = 2; ++ } ++ if (choice > 9 && digits == 2) // Decode into a letter. ++ decode = 1; ++ break; ++ } ++ } ++ } ++ if (backspace && digits > 0) { ++ backspace = 0; ++ choice = choice / 10; ++ if (digits == 2) { ++ printf(" \b\b\b"); // Remove the decoded "(*)" ++ // 0 turned into 10: one more Backspace is needed to remove. ++ if (choice == 0) { ++ printf("\b \b"); ++ digits--; ++ } ++ } ++ printf("\b \b"); // Remove the last entered digit. ++ digits--; ++ if (choice > 9 && digits == 2) // Decode into a letter. ++ decode = 1; ++ } ++ if (decode) { // Decode the current choice number into a letter. ++ decode = 0; ++ if (choice <= maxmenu) { ++ printf("(%c)", keyboard_keys[choice-1]); ++ } else { ++ if (tpm_cshm && choice == 36) ++ printf("(m)"); // For TPM. ++ else ++ printf("(?)"); // No matching letter found. ++ } ++ printf("\b\b\b"); // Move a cursor before the "(*)" ++ } ++ } ++ ++ if (enter) { ++ enter = 0; ++ if (choice == 0) { ++ if (digits == 2) { // for 0 that turned into 10 ++ if (10 <= maxmenu) ++ break; ++ else ++ continue; ++ } ++ // If there are two pages - switch between them. ++ if (maxmenu > BOOTMENU_PAGE_SIZE) { ++ entry_id = 0; ++ page_num = 3 - page_num; // 3 - 1 = 2; 3 - 2 = 1. ++ printf("\n\nSelect boot device - page %d :" ++ " // press ENTER after your numpad input" ++ " - if any -\n " ++ " // - or to switch between the pages...\n", ++ page_num); ++ hlist_for_each_entry(pos, &BootList, node) { ++ if ((page_num == 1 && entry_id == BOOTMENU_PAGE_SIZE) || ++ (page_num == 2 && entry_id == 35)) ++ break; ++ if (page_num == 1 || entry_id >= BOOTMENU_PAGE_SIZE) ++ printf("%c. %s\n", keyboard_keys[entry_id], ++ strtcpy(desc, pos->description, ARRAY_SIZE(desc))); ++ entry_id++; ++ } ++ if (tpm_cshm) ++ printf("\nm-. TPM Configuration"); ++ printf("\n> "); ++ } ++ } else { ++ if (choice > maxmenu) { ++ if (tpm_cshm && choice == 36) ++ tpm_show_menu = 1; ++ } else { ++ // Choice is any of the detected boot devices ==> lets boot! ++ break; ++ } ++ } ++ } ++ ++ if (tpm_show_menu) { ++ tpm_show_menu = 0; ++ choice = 0; ++ if (digits == 0) ++ printf("TPM key pressed."); ++ else ++ digits = 0; + printf("\n"); + tpm_menu(); ++ printf("> "); + } +- if (scan_code >= 1 && scan_code <= maxmenu+1) +- break; ++ } ++ ++ if (choice == 0) // 10(0) ++ choice = 10; ++ ++ if (digits == 0 && choice < 36) { ++ printf("%c", keyboard_keys[choice-1]); ++ if (choice > 9) // Decode into a number. ++ printf("(%d)", choice); + } + printf("\n"); +- if (scan_code == 0x01) +- // ESC +- return; + + // Find entry and make top priority. +- int choice = scan_code - 1; + hlist_for_each_entry(pos, &BootList, node) { + if (! --choice) + break; +diff --git a/src/config.h b/src/config.h +index 93c8dbc..f85cc14 100644 +--- a/src/config.h ++++ b/src/config.h +@@ -19,7 +19,7 @@ + // Space to reserve in high-memory for tables + #define BUILD_MAX_HIGHTABLE (256*1024) + // Largest supported externaly facing drive id +-#define BUILD_MAX_EXTDRIVE 16 ++#define BUILD_MAX_EXTDRIVE 36 + // Number of bytes the smbios may be and still live in the f-segment + #define BUILD_MAX_SMBIOS_FSEG 600 + // Maximum number of bytes the mptable may be and still be copied to f-segment diff --git a/payloads/external/SeaBIOS/multiple_floppies.patch b/payloads/external/SeaBIOS/multiple_floppies.patch new file mode 100644 index 0000000..5249394 --- /dev/null +++ b/payloads/external/SeaBIOS/multiple_floppies.patch @@ -0,0 +1,207 @@ +diff --git a/src/block.h b/src/block.h +index f64e880..aaa236f 100644 +--- a/src/block.h ++++ b/src/block.h +@@ -2,7 +2,7 @@ + #define __BLOCK_H + + #include "types.h" // u32 +- ++#include "romfile.h" // struct romfile_s + + /**************************************************************** + * Disk command request +@@ -48,6 +48,7 @@ struct drive_s { + struct drive_s { + u8 type; // Driver type (DTYPE_*) + u8 floppy_type; // Type of floppy (only for floppy drives). ++ struct romfile_s *floppy_file; // Floppy file (only for virtual floppies). + struct chs_s lchs; // Logical CHS + u64 sectors; // Total sectors count + u32 cntl_id; // Unique id for a given driver type. +diff --git a/src/boot.c b/src/boot.c +index 9f82f3c..79f1e7d 100644 +--- a/src/boot.c ++++ b/src/boot.c +@@ -584,7 +584,7 @@ bcv_prepboot(void) + break; + case IPL_TYPE_FLOPPY: + map_floppy_drive(pos->drive); +- add_bev(IPL_TYPE_FLOPPY, 0); ++ add_bev(IPL_TYPE_FLOPPY, (u32)pos->drive); + break; + case IPL_TYPE_HARDDISK: + map_hd_drive(pos->drive); +@@ -733,6 +733,12 @@ do_boot(int seq_nr) + static void + do_boot(int seq_nr) + { ++ ++ int ret; ++ void *pos; ++ struct romfile_s *file; ++ struct drive_s *drive; ++ + if (! CONFIG_BOOT) + panic("Boot support not compiled in.\n"); + +@@ -744,6 +750,16 @@ do_boot(int seq_nr) + switch (ie->type) { + case IPL_TYPE_FLOPPY: + printf("Booting from Floppy...\n"); ++ drive = (struct drive_s *)ie->vector; ++ file = drive->floppy_file; ++ // File is NULL if a floppy is physical. ++ if (file) { ++ // Copy virtual floppy image into ram. ++ pos = (void *)drive->cntl_id; ++ ret = file->copy(file, pos, file->size); ++ if (ret < 0) ++ break; ++ } + boot_disk(0x00, CheckFloppySig); + break; + case IPL_TYPE_HARDDISK: +diff --git a/src/hw/floppy.c b/src/hw/floppy.c +index 9e6647d..5b37c6c 100644 +--- a/src/hw/floppy.c ++++ b/src/hw/floppy.c +@@ -107,7 +107,7 @@ struct floppyinfo_s FloppyInfo[] VARFSEG = { + }; + + struct drive_s * +-init_floppy(int floppyid, int ftype) ++init_floppy(int floppyid, int ftype, struct romfile_s *ffile) + { + if (ftype <= 0 || ftype >= ARRAY_SIZE(FloppyInfo)) { + dprintf(1, "Bad floppy type %d\n", ftype); +@@ -124,6 +124,7 @@ init_floppy(int floppyid, int ftype) + drive->type = DTYPE_FLOPPY; + drive->blksize = DISK_SECTOR_SIZE; + drive->floppy_type = ftype; ++ drive->floppy_file = ffile; + drive->sectors = (u64)-1; + + memcpy(&drive->lchs, &FloppyInfo[ftype].chs +@@ -134,7 +135,7 @@ addFloppy(int floppyid, int ftype) + static void + addFloppy(int floppyid, int ftype) + { +- struct drive_s *drive = init_floppy(floppyid, ftype); ++ struct drive_s *drive = init_floppy(floppyid, ftype, 0); + if (!drive) + return; + char *desc = znprintf(MAXDESCSIZE, "Floppy [drive %c]", 'A' + floppyid); +diff --git a/src/hw/ramdisk.c b/src/hw/ramdisk.c +index b9e9baa..a679385 100644 +--- a/src/hw/ramdisk.c ++++ b/src/hw/ramdisk.c +@@ -23,40 +23,69 @@ ramdisk_setup(void) + if (!CONFIG_FLASH_FLOPPY) + return; + +- // Find image. +- struct romfile_s *file = romfile_findprefix("floppyimg/", NULL); +- if (!file) +- return; +- const char *filename = file->name; +- u32 size = file->size; +- dprintf(3, "Found floppy file %s of size %d\n", filename, size); +- int ftype = find_floppy_type(size); +- if (ftype < 0) { +- dprintf(3, "No floppy type found for ramdisk size\n"); ++ struct romfile_s *file = NULL; ++ char *filename, *desc; ++ u32 size, max_size = 0; ++ int ftype; ++ void *pos; ++ struct drive_s *drive; ++ ++ // Find the max floppy size ++ for (;;) { ++ // Find the next image. ++ file = romfile_findprefix("floppyimg/", file); ++ if (!file) ++ break; ++ filename = file->name; ++ size = file->size; ++ dprintf(3, "Found floppy file %s of size %d\n", filename, size); ++ // Check if this size is valid. ++ ftype = find_floppy_type(size); ++ if (ftype < 0) { ++ dprintf(3, "No floppy type found for ramdisk size\n"); ++ } else { ++ if (size > max_size) ++ max_size = size; ++ } ++ } ++ if (max_size == 0) { ++ dprintf(3, "No floppies found\n"); + return; + } + + // Allocate ram for image. +- void *pos = memalign_tmphigh(PAGE_SIZE, size); ++ pos = memalign_tmphigh(PAGE_SIZE, max_size); + if (!pos) { + warn_noalloc(); + return; + } +- e820_add((u32)pos, size, E820_RESERVED); ++ e820_add((u32)pos, max_size, E820_RESERVED); ++ dprintf(3, "Allocate %u bytes for a floppy\n", max_size); + +- // Copy image into ram. +- int ret = file->copy(file, pos, size); +- if (ret < 0) +- return; +- +- // Setup driver. +- struct drive_s *drive = init_floppy((u32)pos, ftype); +- if (!drive) +- return; +- drive->type = DTYPE_RAMDISK; +- dprintf(1, "Mapping floppy %s to addr %p\n", filename, pos); +- char *desc = znprintf(MAXDESCSIZE, "Ramdisk [%s]", &filename[10]); +- boot_add_floppy(drive, desc, bootprio_find_named_rom(filename, 0)); ++ // Setup the floppy drivers. ++ file = NULL; ++ for (;;) { ++ // Find the next image. ++ file = romfile_findprefix("floppyimg/", file); ++ if (!file) ++ return; ++ filename = file->name; ++ size = file->size; ++ dprintf(3, "Found floppy file %s of size %d\n", filename, size); ++ ftype = find_floppy_type(size); ++ if (ftype < 0) { ++ dprintf(3, "No floppy type found for ramdisk size\n"); ++ } else { ++ // Setup driver. ++ drive = init_floppy((u32)pos, ftype, file); ++ if (!drive) ++ return; ++ drive->type = DTYPE_RAMDISK; ++ dprintf(1, "Mapping floppy %s to addr %p\n", filename, pos); ++ desc = znprintf(MAXDESCSIZE, "Ramdisk [%s]", &filename[10]); ++ boot_add_floppy(drive, desc, bootprio_find_named_rom(filename, 0)); ++ } ++ } + } + + static int +diff --git a/src/util.h b/src/util.h +index 9c06850..ce3a26d 100644 +--- a/src/util.h ++++ b/src/util.h +@@ -147,7 +147,8 @@ void dma_setup(void); + // hw/floppy.c + extern struct floppy_ext_dbt_s diskette_param_table2; + void floppy_setup(void); +-struct drive_s *init_floppy(int floppyid, int ftype); ++extern struct romfile_s *ffile; ++struct drive_s *init_floppy(int floppyid, int ftype, struct romfile_s *ffile); + int find_floppy_type(u32 size); + int floppy_process_op(struct disk_op_s *op); + void floppy_tick(void); -- To view, visit https://review.coreboot.org/c/coreboot/+/32351 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Idf4efba31091a8678b51c2f6541d440c5cc6d37d Gerrit-Change-Number: 32351 Gerrit-PatchSet: 1 Gerrit-Owner: mikeb mikeb <mikebdp2(a)gmail.com> Gerrit-Reviewer: Mike Banon <mikebdp2(a)gmail.com> Gerrit-MessageType: newchange

5 32

Change in ...coreboot[master]: autoport: Add support for Haswell-LynxPoint platform
by Iru Cai (vimacs) (Code Review) July 14, 2024

July 14, 2024

Hello Iru Cai, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/30890 to review the following change. Change subject: autoport: Add support for Haswell-LynxPoint platform ...................................................................... autoport: Add support for Haswell-LynxPoint platform It can now generate a buildable source for Clevo W650SZ. TODO: - Support Lynx Point LP (GPIO registers differ from non-LP) - Use PCH HD-Audio in azilia instead of the CPU/Northbridge HD-Audio Change-Id: I4f6e8c97b5122101de2f36bba8ba9f8ddd5b813a Signed-off-by: Iru Cai <mytbk920423(a)gmail.com> --- M util/autoport/azalia.go A util/autoport/haswell.go A util/autoport/lynxpoint.go M util/autoport/main.go 4 files changed, 625 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/90/30890/1 diff --git a/util/autoport/azalia.go b/util/autoport/azalia.go index c525189..3090dd0 100644 --- a/util/autoport/azalia.go +++ b/util/autoport/azalia.go @@ -62,4 +62,9 @@ RegisterPCI(0x8086, 0x1c20, azalia{}) /* C216/ivybridge */ RegisterPCI(0x8086, 0x1e20, azalia{}) + /* Haswell */ + RegisterPCI(0x8086, 0x0c0c, azalia{}) + /* Lynx Point */ + RegisterPCI(0x8086, 0x8c20, azalia{}) + RegisterPCI(0x8086, 0x9c20, azalia{}) } diff --git a/util/autoport/haswell.go b/util/autoport/haswell.go new file mode 100644 index 0000000..d3c9d9f --- /dev/null +++ b/util/autoport/haswell.go @@ -0,0 +1,119 @@ +package main + +type haswellmc struct { + variant string +} + +func (i haswellmc) Scan(ctx Context, addr PCIDevData) { + inteltool := ctx.InfoSource.GetInteltool() + + /* FIXME:XX Move this somewhere else. */ + MainboardIncludes = append(MainboardIncludes, "drivers/intel/gma/int15.h") + MainboardEnable += (` /* FIXME: fix those values*/ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +`) + + DevTree = DevTreeNode{ + Chip: "northbridge/intel/haswell", + MissingParent: "northbridge", + Comment: "FIXME: check gfx.ndid and gfx.did", + Registers: map[string]string{ + "gpu_dp_b_hotplug": FormatInt32((inteltool.IGD[0xc4030] >> 2) & 7), + "gpu_dp_c_hotplug": FormatInt32((inteltool.IGD[0xc4030] >> 10) & 7), + "gpu_dp_d_hotplug": FormatInt32((inteltool.IGD[0xc4030] >> 18) & 7), + "gpu_panel_port_select": FormatInt32((inteltool.IGD[0xc7208] >> 30) & 3), + "gpu_panel_power_up_delay": FormatInt32((inteltool.IGD[0xc7208] >> 16) & 0x1fff), + "gpu_panel_power_backlight_on_delay": FormatInt32(inteltool.IGD[0xc7208] & 0x1fff), + "gpu_panel_power_down_delay": FormatInt32((inteltool.IGD[0xc720c] >> 16) & 0x1fff), + "gpu_panel_power_backlight_off_delay": FormatInt32(inteltool.IGD[0xc720c] & 0x1fff), + "gpu_panel_power_cycle_delay": FormatInt32(inteltool.IGD[0xc7210] & 0xff), + "gpu_cpu_backlight": FormatHex32(inteltool.IGD[0x48254]), + "gpu_pch_backlight": FormatHex32((inteltool.IGD[0xc8254] >> 16) * 0x10001), + "gpu_ddi_e_connected": FormatBool(((inteltool.IGD[0x64000] >> 4) & 1) == 0), + /* FIXME:XX hardcoded. */ + "gfx.ndid": "3", + "gfx.did": "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }", + }, + Children: []DevTreeNode{ + { + Chip: "cpu_cluster", + Dev: 0, + Children: []DevTreeNode{ + { + Chip: "cpu/intel/haswell", + Children: []DevTreeNode{ + { + Chip: "lapic", + Dev: 0, + }, + { + Chip: "lapic", + Dev: 0xacac, + Disabled: true, + }, + }, + Registers: map[string]string{ + /* FIXME:XX hardcoded. */ + "c1_acpower": "1", + "c2_acpower": "3", + "c3_acpower": "5", + "c1_battery": "1", + "c2_battery": "3", + "c3_battery": "5", + }, + }, + }, + }, + + { + Chip: "domain", + Dev: 0, + PCIController: true, + ChildPCIBus: 0, + PCISlots: []PCISlot{ + PCISlot{PCIAddr: PCIAddr{Dev: 0x0, Func: 0}, writeEmpty: true, additionalComment: "Host bridge"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1, Func: 0}, writeEmpty: true, additionalComment: "PCIe Bridge for discrete graphics"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x2, Func: 0}, writeEmpty: true, additionalComment: "Internal graphics"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x3, Func: 0}, writeEmpty: true, additionalComment: "Mini-HD audio"}, + }, + }, + }, + } + + PutPCIDev(addr, "Host bridge") + + /* FIXME:XX some configs are unsupported. */ + + KconfigBool["CPU_INTEL_HASWELL"] = true + KconfigBool["NORTHBRIDGE_INTEL_HASWELL"] = true + KconfigBool["INTEL_INT15"] = true + KconfigBool["HAVE_ACPI_TABLES"] = true + KconfigBool["HAVE_ACPI_RESUME"] = true + + KconfigInt["MAX_CPUS"] = 8 + + DSDTIncludes = append(DSDTIncludes, DSDTInclude{ + File: "cpu/intel/common/acpi/cpu.asl", + }) + + DSDTPCI0Includes = append(DSDTPCI0Includes, DSDTInclude{ + File: "northbridge/intel/haswell/acpi/haswell.asl", + }, DSDTInclude{ + File: "drivers/intel/gma/acpi/default_brightness_levels.asl", + }) +} + +func init() { + RegisterPCI(0x8086, 0x0c00, haswellmc{variant: "Desktop"}) + RegisterPCI(0x8086, 0x0c04, haswellmc{variant: "Mobile"}) + RegisterPCI(0x8086, 0x0a04, haswellmc{variant: "ULT"}) + RegisterPCI(0x8086, 0x0c08, haswellmc{variant: "Server"}) + for _, id := range []uint16{ + 0x0402, 0x0412, 0x0422, + 0x0406, 0x0416, 0x0426, + 0x0d16, 0x0d26, 0x0d36, + 0x0a06, 0x0a16, 0x0a26, + } { + RegisterPCI(0x8086, id, GenericVGA{GenericPCI{Comment: "VGA controller"}}) + } +} diff --git a/util/autoport/lynxpoint.go b/util/autoport/lynxpoint.go new file mode 100644 index 0000000..df20c3f --- /dev/null +++ b/util/autoport/lynxpoint.go @@ -0,0 +1,495 @@ +package main + +import ( + "fmt" + "os" +) + +type lynxpoint struct { + variant string + node *DevTreeNode +} + +func (b lynxpoint) writeGPIOSet(ctx Context, sb *os.File, + val uint32, set uint, partno int, constraint uint32) { + + max := uint(32) + if set == 3 { + max = 12 + } + + bits := [6][2]string{ + {"GPIO_MODE_NATIVE", "GPIO_MODE_GPIO"}, + {"GPIO_DIR_OUTPUT", "GPIO_DIR_INPUT"}, + {"GPIO_LEVEL_LOW", "GPIO_LEVEL_HIGH"}, + {"GPIO_RESET_PWROK", "GPIO_RESET_RSMRST"}, + {"GPIO_NO_INVERT", "GPIO_INVERT"}, + {"GPIO_NO_BLINK", "GPIO_BLINK"}, + } + + for i := uint(0); i < max; i++ { + if ((constraint>>i)&1 == 1) { + fmt.Fprintf(sb, " .gpio%d = %s,\n", + (set-1)*32+i, + bits[partno][(val>>i)&1]) + } + } +} + +func (b lynxpoint) GPIO(ctx Context, inteltool InteltoolData) { + var constraint uint32 + gpio := Create(ctx, "gpio.c") + defer gpio.Close() + + AddROMStageFile("gpio.c", "") + + Add_gpl(gpio) + gpio.WriteString("#include <southbridge/intel/common/gpio.h>\n\n") + + /* TODO: different in LP PCH */ + addresses := [3][6]int{ + {0x00, 0x04, 0x0c, 0x60, 0x2c, 0x18}, + {0x30, 0x34, 0x38, 0x64, -1, -1}, + {0x40, 0x44, 0x48, 0x68, -1, -1}, + } + + for set := 1; set <= 3; set++ { + for partno, part := range []string{"mode", "direction", "level", "reset", "invert", "blink"} { + addr := addresses[set-1][partno] + if addr < 0 { + continue + } + fmt.Fprintf(gpio, "static const struct pch_gpio_set%d pch_gpio_set%d_%s = {\n", + set, set, part) + + constraint = 0xffffffff + switch part { + case "direction": + /* Ignored on native mode */ + constraint = inteltool.GPIO[uint16(addresses[set-1][0])] + case "level": + /* Level doesn't matter for input */ + constraint = inteltool.GPIO[uint16(addresses[set-1][0])] + constraint &^= inteltool.GPIO[uint16(addresses[set-1][1])] + case "reset": + /* Only show reset */ + constraint = inteltool.GPIO[uint16(addresses[set-1][3])] + case "invert": + /* Only on input and only show inverted GPIO */ + constraint = inteltool.GPIO[uint16(addresses[set-1][0])] + constraint &= inteltool.GPIO[uint16(addresses[set-1][1])] + constraint &= inteltool.GPIO[uint16(addresses[set-1][4])] + case "blink": + /* Only on output and only show blinking GPIO */ + constraint = inteltool.GPIO[uint16(addresses[set-1][0])] + constraint &^= inteltool.GPIO[uint16(addresses[set-1][1])] + constraint &= inteltool.GPIO[uint16(addresses[set-1][5])] + } + b.writeGPIOSet(ctx, gpio, inteltool.GPIO[uint16(addr)], uint(set), partno, constraint) + gpio.WriteString("};\n\n") + } + } + + gpio.WriteString(`const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; +`) +} + +func (b lynxpoint) IsPCIeHotplug(ctx Context, port int) bool { + portDev, ok := PCIMap[PCIAddr{Bus: 0, Dev: 0x1c, Func: port}] + if !ok { + return false + } + return (portDev.ConfigDump[0xdb] & (1 << 6)) != 0 +} + +func (b lynxpoint) GetGPIOHeader() string { + return "southbridge/intel/lynxpoint/pch.h" +} + +func (b lynxpoint) EnableGPE(in int) { + b.node.Registers[fmt.Sprintf("gpi%d_routing", in)] = "2" +} + +func (b lynxpoint) EncodeGPE(in int) int { + return in + 0x10 +} + +func (b lynxpoint) DecodeGPE(in int) int { + return in - 0x10 +} + +func (b lynxpoint) NeedRouteGPIOManually() { + b.node.Comment += ", FIXME: set gpiX_routing for EC support" +} + +func (b lynxpoint) Scan(ctx Context, addr PCIDevData) { + + SouthBridge = &b + + inteltool := ctx.InfoSource.GetInteltool() + b.GPIO(ctx, inteltool) + + KconfigBool["SOUTHBRIDGE_INTEL_LYNXPOINT"] = true + if b.variant == "Lynx Point LP" { + KconfigBool["INTEL_LYNXPOINT_LP"] = true + } + KconfigBool["SERIRQ_CONTINUOUS_MODE"] = true + KconfigInt["USBDEBUG_HCD_INDEX"] = 2 + KconfigComment["USBDEBUG_HCD_INDEX"] = "FIXME: check this" + dmi := ctx.InfoSource.GetDMI() + if dmi.Vendor == "LENOVO" { + KconfigInt["DRAM_RESET_GATE_GPIO"] = 10 + } else { + KconfigInt["DRAM_RESET_GATE_GPIO"] = 60 + } + KconfigComment["DRAM_RESET_GATE_GPIO"] = "FIXME: check this" + + /* Not strictly speaking correct. These subsys/subvendor referer to PCI devices. + But most systems don't have any of those. But the config needs to be set + nevertheless. So set it to southbridge subsys/subvendor. */ + KconfigHex["MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID"] = uint32(GetLE16(addr.ConfigDump[0x2c:0x2e])) + KconfigHex["MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID"] = uint32(GetLE16(addr.ConfigDump[0x2e:0x30])) + + ich9GetFlashSize(ctx) + + DSDTDefines = append(DSDTDefines, + DSDTDefine{ + Key: "BRIGHTNESS_UP", + Value: "\\_SB.PCI0.GFX0.INCB", + }, + DSDTDefine{ + Key: "BRIGHTNESS_DOWN", + Value: "\\_SB.PCI0.GFX0.DECB", + }, + DSDTDefine{ + Key: "ACPI_VIDEO_DEVICE", + Value: "\\_SB.PCI0.GFX0", + }) + + /* SPI init */ + MainboardIncludes = append(MainboardIncludes, "southbridge/intel/lynxpoint/pch.h") + + cur := DevTreeNode{ + Chip: "southbridge/intel/lynxpoint", + Comment: "Intel Series 8 Lynx Point PCH", + + Registers: map[string]string{ + "pirqa_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x60]), + "pirqb_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x61]), + "pirqc_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x62]), + "pirqd_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x63]), + "pirqe_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x68]), + "pirqf_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x69]), + "pirqg_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x6a]), + "pirqh_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x6b]), + "sata_ahci": "1", + "gen1_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x84:0x88]), + "gen2_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x88:0x8c]), + "gen3_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x8c:0x90]), + "gen4_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x90:0x94]), + "sata_port_map": fmt.Sprintf("0x%x", PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 2}].ConfigDump[0x92]&0x3f), + }, + PCISlots: []PCISlot{ + PCISlot{PCIAddr: PCIAddr{Dev: 0x14, Func: 0}, writeEmpty: false, additionalComment: "USB 3.0 Controller"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 0}, writeEmpty: true, additionalComment: "Management Engine Interface 1"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 1}, writeEmpty: true, additionalComment: "Management Engine Interface 2"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 2}, writeEmpty: true, additionalComment: "Management Engine IDE-R"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 3}, writeEmpty: true, additionalComment: "Management Engine KT"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x19, Func: 0}, writeEmpty: true, additionalComment: "Intel Gigabit Ethernet"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1a, Func: 0}, writeEmpty: true, additionalComment: "USB2 EHCI #2"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1b, Func: 0}, writeEmpty: true, additionalComment: "High Definition Audio"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 0}, writeEmpty: true, additionalComment: "PCIe Port #1"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 1}, writeEmpty: true, additionalComment: "PCIe Port #2"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 2}, writeEmpty: true, additionalComment: "PCIe Port #3"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 3}, writeEmpty: true, additionalComment: "PCIe Port #4"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 4}, writeEmpty: true, additionalComment: "PCIe Port #5"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 5}, writeEmpty: true, additionalComment: "PCIe Port #6"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 6}, writeEmpty: true, additionalComment: "PCIe Port #7"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 7}, writeEmpty: true, additionalComment: "PCIe Port #8"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1d, Func: 0}, writeEmpty: true, additionalComment: "USB2 EHCI #1"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1e, Func: 0}, writeEmpty: true, additionalComment: "PCI bridge"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 0}, writeEmpty: true, additionalComment: "LPC bridge"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 2}, writeEmpty: true, additionalComment: "SATA Controller 1"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 3}, writeEmpty: true, additionalComment: "SMBus"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 5}, writeEmpty: true, additionalComment: "SATA Controller 2"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 6}, writeEmpty: true, additionalComment: "Thermal"}, + }, + } + + b.node = &cur + + PutPCIChip(addr, cur) + PutPCIDevParent(addr, "PCI-LPC bridge", "lpc") + + DSDTIncludes = append(DSDTIncludes, DSDTInclude{ + File: "southbridge/intel/lynxpoint/acpi/platform.asl", + }) + DSDTIncludes = append(DSDTIncludes, DSDTInclude{ + File: "southbridge/intel/lynxpoint/acpi/globalnvs.asl", + Comment: "global NVS and variables", + }) + DSDTIncludes = append(DSDTIncludes, DSDTInclude{ + File: "southbridge/intel/lynxpoint/acpi/sleepstates.asl", + }) + DSDTPCI0Includes = append(DSDTPCI0Includes, DSDTInclude{ + File: "southbridge/intel/lynxpoint/acpi/pch.asl", + }) + + sb := Create(ctx, "romstage.c") + defer sb.Close() + Add_gpl(sb) + sb.WriteString(`#include <stdint.h> +#include <cpu/intel/romstage.h> +#include <cpu/intel/haswell/haswell.h> +#include <northbridge/intel/haswell/haswell.h> +#include <northbridge/intel/haswell/pei_data.h> +#include <southbridge/intel/common/gpio.h> +#include <southbridge/intel/lynxpoint/pch.h> + +static const struct rcba_config_instruction rcba_config[] = { +`) + RestoreDIRRoute(sb, "D31IR", uint16(inteltool.RCBA[0x3140])) + RestoreDIRRoute(sb, "D29IR", uint16(inteltool.RCBA[0x3144])) + RestoreDIRRoute(sb, "D28IR", uint16(inteltool.RCBA[0x3146])) + RestoreDIRRoute(sb, "D27IR", uint16(inteltool.RCBA[0x3148])) + RestoreDIRRoute(sb, "D26IR", uint16(inteltool.RCBA[0x314c])) + RestoreDIRRoute(sb, "D25IR", uint16(inteltool.RCBA[0x3150])) + RestoreDIRRoute(sb, "D22IR", uint16(inteltool.RCBA[0x315c])) + RestoreDIRRoute(sb, "D20IR", uint16(inteltool.RCBA[0x3160])) + + sb.WriteString(` + RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS), + + RCBA_END_CONFIG, +};`) + + sb.WriteString(` + +void mainboard_config_superio(void) +{ +} + +void mainboard_romstage_entry(unsigned long bist) +{ + struct pei_data pei_data = { + .pei_version = PEI_VERSION, + .mchbar = (uintptr_t)DEFAULT_MCHBAR, + .dmibar = (uintptr_t)DEFAULT_DMIBAR, + .epbar = DEFAULT_EPBAR, + .pciexbar = DEFAULT_PCIEXBAR, + .smbusbar = SMBUS_IO_BASE, + .wdbbar = 0x4000000, + .wdbsize = 0x1000, + .hpet_address = HPET_ADDR, + .rcba = (uintptr_t)DEFAULT_RCBA, + .pmbase = DEFAULT_PMBASE, + .gpiobase = DEFAULT_GPIOBASE, + .temp_mmio_base = 0xfed08000, + .system_type = 1, /* desktop/server, FIXME: check this */ + .tseg_size = CONFIG_SMM_TSEG_SIZE, + .spd_addresses = { 0xa0, 0xa2, 0xa4, 0xa6 }, /* FIXME: check this */ + .ec_present = 0, + .dimm_channel0_disabled = 0, /* FIXME: leave channel 0 enabled */ + .dimm_channel1_disabled = 0, /* FIXME: leave channel 1 enabled */ + .max_ddr3_freq = 1600, + .usb2_ports = { + /* Length, Enable, OCn#, Location */ +`) + + pdo1 := PCIMap[PCIAddr{Bus: 0, Dev: 0x1d, Func: 0}].ConfigDump[0x64] + ocmap1 := PCIMap[PCIAddr{Bus: 0, Dev: 0x1d, Func: 0}].ConfigDump[0x74:0x78] + pdo2 := PCIMap[PCIAddr{Bus: 0, Dev: 0x1a, Func: 0}].ConfigDump[0x64] + ocmap2 := PCIMap[PCIAddr{Bus: 0, Dev: 0x1a, Func: 0}].ConfigDump[0x74:0x78] + + for port := uint(0); port < 14; port++ { + var port_oc int = -1 + var port_pos string + var port_disable uint8 + + if port < 8 { + port_disable = (pdo1 >> port) & 1 + for oc := 0; oc < 4; oc++ { + if ((ocmap1[oc] & (1 << port)) != 0) { + port_oc = oc + break + } + } + } else { + port_disable = (pdo2 >> (port - 8)) & 1 + for oc := 0; oc < 4; oc++ { + if ((ocmap2[oc] & (1 << (port - 8))) != 0) { + port_oc = oc + 4 + break + } + } + } + if port_disable == 1 { + port_pos = "USB_PORT_SKIP" + } else { + port_pos = "USB_PORT_BACK_PANEL" + } + if port_oc == -1 { + fmt.Fprintf(sb, " { 0x0040, %d, USB_OC_PIN_SKIP, %s },\n", + (port_disable ^ 1), port_pos) + } else { + fmt.Fprintf(sb, " { 0x0040, %d, %d, %s },\n", + (port_disable ^ 1), port_oc, port_pos) + } + } + + sb.WriteString(` }, + .usb3_ports = { +`) + + xpdo := PCIMap[PCIAddr{Bus: 0, Dev: 0x14, Func: 0}].ConfigDump[0xe8] + u3ocm := PCIMap[PCIAddr{Bus: 0, Dev: 0x14, Func: 0}].ConfigDump[0xc8:0xd0] + + for port := uint(0); port < 6; port++ { + var port_oc int = -1 + port_disable := (xpdo >> port) & 1 + for oc := 0; oc < 8; oc++ { + if (u3ocm[oc] & (1 << port)) != 0 { + port_oc = oc + break + } + } + if port_oc == -1 { + fmt.Fprintf(sb, " { %d, USB_OC_PIN_SKIP },\n", + (port_disable ^ 1)) + } else { + fmt.Fprintf(sb, " { %d, %d },\n", + (port_disable ^ 1), port_oc) + } + } + + sb.WriteString(` }, + }; + + struct romstage_params romstage_params = { + .pei_data = &pei_data, + .gpio_map = &mainboard_gpio_map, + .rcba_config = &rcba_config[0], + .bist = bist, + }; + + romstage_common(&romstage_params); +}`) + + gnvs := Create(ctx, "acpi_tables.c") + defer gnvs.Close() + + Add_gpl(gnvs) + gnvs.WriteString(`#include <southbridge/intel/lynxpoint/nvs.h> + +/* FIXME: check this function. */ +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + // the lid is open by default. + gnvs->lids = 1; + + gnvs->tcrt = 100; + gnvs->tpsv = 90; +} +`) + +} + +func init() { + for _, id := range []uint16 { + 0x8c41, 0x8c49, 0x8c4b, 0x8c4f, + } { + RegisterPCI(0x8086, uint16(id), lynxpoint{variant: "Lynx Point Mobile"}) + } + + for _, id := range []uint16 { + 0x8c42, 0x8c44, 0x8c46, 0x8c4a, + 0x8c4c, 0x8c4e, 0x8c50, 0x8c5c, + } { + RegisterPCI(0x8086, uint16(id), lynxpoint{variant: "Lynx Point Desktop"}) + } + + for _, id := range []uint16 { + 0x8c52, 0x8c54, 0x8c56, + } { + RegisterPCI(0x8086, uint16(id), lynxpoint{variant: "Lynx Point Server"}) + } + + for _, id := range []uint16 { + 0x9c41, 0x9c43, 0x9c45, + } { + RegisterPCI(0x8086, uint16(id), lynxpoint{variant: "Lynx Point LP"}) + } + + /* PCIe bridge */ + for _, id := range []uint16{ + 0x8c10, 0x8c12, 0x8c14, 0x8c16, 0x8c18, 0x8c1a, 0x8c1c, 0x8c1e, + 0x9c10, 0x9c12, 0x9c14, 0x9c16, 0x9c18, 0x9c1a, + } { + RegisterPCI(0x8086, id, GenericPCI{}) + } + + /* SMBus controller */ + RegisterPCI(0x8086, 0x1c22, GenericPCI{MissingParent: "smbus"}) + RegisterPCI(0x8086, 0x1e22, GenericPCI{MissingParent: "smbus"}) + RegisterPCI(0x8086, 0x8c22, GenericPCI{MissingParent: "smbus"}) + RegisterPCI(0x8086, 0x9c22, GenericPCI{MissingParent: "smbus"}) + + /* SATA */ + for _, id := range []uint16{ + 0x8c00, 0x8c02, 0x8c04, 0x8c06, 0x8c08, 0x8c0e, + 0x8c01, 0x8c03, 0x8c05, 0x8c07, 0x8c09, 0x8c0f, + 0x9c03, 0x9c05, 0x9c07, 0x9c0f, + } { + RegisterPCI(0x8086, id, GenericPCI{}) + } + + /* EHCI */ + for _, id := range []uint16{ + 0x9c26, 0x8c26, 0x8c2d, + } { + RegisterPCI(0x8086, id, GenericPCI{}) + } + + /* XHCI */ + RegisterPCI(0x8086, 0x8c31, GenericPCI{}) + RegisterPCI(0x8086, 0x9c31, GenericPCI{}) + + /* ME and children */ + for _, id := range []uint16{ + 0x8c3a, 0x8c3b, + } { + RegisterPCI(0x8086, id, GenericPCI{}) + } + + /* Ethernet */ + RegisterPCI(0x8086, 0x8c33, GenericPCI{}) +} diff --git a/util/autoport/main.go b/util/autoport/main.go index 05a829b..c1920a7 100644 --- a/util/autoport/main.go +++ b/util/autoport/main.go @@ -236,6 +236,12 @@ pcidev.ConfigDump[addr]) } +func RestoreDIRRoute(f *os.File, regname string, val uint16) { + fmt.Fprintf(f, " RCBA_SET_REG_16(%s, DIR_ROUTE(PIRQ%c, PIRQ%c, PIRQ%c, PIRQ%c)),\n", + regname, 'A' + (val & 7), 'A' + ((val >> 4) & 7), + 'A' + ((val >> 8) & 7), 'A' + ((val >> 12) & 7)) +} + func RestorePCI32Simple(f *os.File, pcidev PCIDevData, addr uint16) { fmt.Fprintf(f, " pci_write_config32(PCI_DEV(%d, 0x%02x, %d), 0x%02x, 0x%02x%02x%02x%02x);\n", pcidev.Bus, pcidev.Dev, pcidev.Func, addr, -- To view, visit https://review.coreboot.org/c/coreboot/+/30890 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I4f6e8c97b5122101de2f36bba8ba9f8ddd5b813a Gerrit-Change-Number: 30890 Gerrit-PatchSet: 1 Gerrit-Owner: Iru Cai (vimacs) <mytbk920423(a)gmail.com> Gerrit-Reviewer: Iru Cai <mytbk920423(a)gmail.com> Gerrit-MessageType: newchange

15 92

Change in ...coreboot[master]: mainboard/samsung/350v5c: add initial board files
by Kacper Słomiński (Code Review) June 8, 2024

June 8, 2024

Kacper Słomiński has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/30942 Change subject: mainboard/samsung/350v5c: add initial board files ...................................................................... mainboard/samsung/350v5c: add initial board files Signed-off-by: Kacper Słomiński <kacper.slominski72(a)gmail.com> Change-Id: I64fcf931938fb3b158b9576b787f452bf6077843 --- A src/mainboard/samsung/350v5c/Kconfig A src/mainboard/samsung/350v5c/Kconfig.name A src/mainboard/samsung/350v5c/Makefile.inc A src/mainboard/samsung/350v5c/acpi/ec.asl A src/mainboard/samsung/350v5c/acpi/platform.asl A src/mainboard/samsung/350v5c/acpi/superio.asl A src/mainboard/samsung/350v5c/acpi_tables.c A src/mainboard/samsung/350v5c/board_info.txt A src/mainboard/samsung/350v5c/devicetree.cb A src/mainboard/samsung/350v5c/dsdt.asl A src/mainboard/samsung/350v5c/gnvs.c A src/mainboard/samsung/350v5c/gpio.c A src/mainboard/samsung/350v5c/hda_verb.c A src/mainboard/samsung/350v5c/mainboard.c A src/mainboard/samsung/350v5c/romstage.c 15 files changed, 705 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/42/30942/1 diff --git a/src/mainboard/samsung/350v5c/Kconfig b/src/mainboard/samsung/350v5c/Kconfig new file mode 100644 index 0000000..5ec7139 --- /dev/null +++ b/src/mainboard/samsung/350v5c/Kconfig @@ -0,0 +1,53 @@ +if BOARD_SAMSUNG_350V5C + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_6144 + select CPU_INTEL_SOCKET_RPGA989 + select EC_ACPI + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select INTEL_INT15 + select NORTHBRIDGE_INTEL_IVYBRIDGE + select SANDYBRIDGE_IVYBRIDGE_LVDS + select SERIRQ_CONTINUOUS_MODE + select SOUTHBRIDGE_INTEL_C216 + select SYSTEM_TYPE_LAPTOP + select USE_NATIVE_RAMINIT + +config MAINBOARD_DIR + string + default samsung/350v5c + +config MAINBOARD_PART_NUMBER + string + default "350V5C" + +config VGA_BIOS_FILE + string + default "pci8086,0166.rom" + +config VGA_BIOS_ID + string + default "8086,0166" + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0xc0d8 + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x144d + +config DRAM_RESET_GATE_GPIO # FIXME: check this + int + default 60 + +config MAX_CPUS + int + default 8 + +config USBDEBUG_HCD_INDEX # FIXME: check this + int + default 2 +endif diff --git a/src/mainboard/samsung/350v5c/Kconfig.name b/src/mainboard/samsung/350v5c/Kconfig.name new file mode 100644 index 0000000..9a2e96a --- /dev/null +++ b/src/mainboard/samsung/350v5c/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_SAMSUNG_350V5C + bool "350V5C" diff --git a/src/mainboard/samsung/350v5c/Makefile.inc b/src/mainboard/samsung/350v5c/Makefile.inc new file mode 100644 index 0000000..c55eebe --- /dev/null +++ b/src/mainboard/samsung/350v5c/Makefile.inc @@ -0,0 +1,2 @@ +romstage-y += gpio.c +ramstage-y += gnvs.c diff --git a/src/mainboard/samsung/350v5c/acpi/ec.asl b/src/mainboard/samsung/350v5c/acpi/ec.asl new file mode 100644 index 0000000..f2f4269 --- /dev/null +++ b/src/mainboard/samsung/350v5c/acpi/ec.asl @@ -0,0 +1,7 @@ +Device(EC) +{ + Name (_HID, EISAID("PNP0C09")) + Name (_UID, 0) + Name (_GPE, 23) +/* FIXME: EC support */ +} diff --git a/src/mainboard/samsung/350v5c/acpi/platform.asl b/src/mainboard/samsung/350v5c/acpi/platform.asl new file mode 100644 index 0000000..c2862c9 --- /dev/null +++ b/src/mainboard/samsung/350v5c/acpi/platform.asl @@ -0,0 +1,10 @@ +Method(_WAK,1) +{ + /* FIXME: EC support */ + Return(Package(){0,0}) +} + +Method(_PTS,1) +{ + /* FIXME: EC support */ +} diff --git a/src/mainboard/samsung/350v5c/acpi/superio.asl b/src/mainboard/samsung/350v5c/acpi/superio.asl new file mode 100644 index 0000000..f2b35ba --- /dev/null +++ b/src/mainboard/samsung/350v5c/acpi/superio.asl @@ -0,0 +1 @@ +#include <drivers/pc80/pc/ps2_controller.asl> diff --git a/src/mainboard/samsung/350v5c/acpi_tables.c b/src/mainboard/samsung/350v5c/acpi_tables.c new file mode 100644 index 0000000..2997587 --- /dev/null +++ b/src/mainboard/samsung/350v5c/acpi_tables.c @@ -0,0 +1 @@ +/* dummy */ diff --git a/src/mainboard/samsung/350v5c/board_info.txt b/src/mainboard/samsung/350v5c/board_info.txt new file mode 100644 index 0000000..cdbf8b8 --- /dev/null +++ b/src/mainboard/samsung/350v5c/board_info.txt @@ -0,0 +1,4 @@ +Category: laptop +ROM protocol: SPI +Flashrom support: n +FIXME: put ROM package, ROM socketed, Release year diff --git a/src/mainboard/samsung/350v5c/devicetree.cb b/src/mainboard/samsung/350v5c/devicetree.cb new file mode 100644 index 0000000..91093c0 --- /dev/null +++ b/src/mainboard/samsung/350v5c/devicetree.cb @@ -0,0 +1,119 @@ +chip northbridge/intel/sandybridge # FIXME: check gfx.ndid and gfx.did + register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }" + register "gfx.link_frequency_270_mhz" = "0" + register "gfx.ndid" = "3" + register "gfx.use_spread_spectrum_clock" = "0" + register "gpu_cpu_backlight" = "0x00000000" + register "gpu_dp_b_hotplug" = "0" + register "gpu_dp_c_hotplug" = "0" + register "gpu_dp_d_hotplug" = "0" + register "gpu_panel_port_select" = "0" + register "gpu_panel_power_backlight_off_delay" = "0" + register "gpu_panel_power_backlight_on_delay" = "0" + register "gpu_panel_power_cycle_delay" = "0" + register "gpu_panel_power_down_delay" = "0" + register "gpu_panel_power_up_delay" = "0" + register "gpu_pch_backlight" = "0x00000000" + device cpu_cluster 0x0 on + chip cpu/intel/socket_rPGA989 + device lapic 0x0 on + end + end + chip cpu/intel/model_206ax # FIXME: check all registers + register "c1_acpower" = "1" + register "c1_battery" = "1" + register "c2_acpower" = "3" + register "c2_battery" = "3" + register "c3_acpower" = "5" + register "c3_battery" = "5" + device lapic 0xacac off + end + end + end + device domain 0x0 on + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "c2_latency" = "0x0065" + register "docking_supported" = "1" + register "gen1_dec" = "0x00040069" + register "gen2_dec" = "0x0004fd61" + register "gen3_dec" = "0x00000000" + register "gen4_dec" = "0x00000000" + register "gpi7_routing" = "2" + register "p_cnt_throttling_supported" = "0" + register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }" + register "pcie_port_coalesce" = "1" + register "sata_interface_speed_support" = "0x3" + register "sata_port_map" = "0x11" + register "spi_lvscc" = "0x2005" + register "spi_uvscc" = "0x2005" + register "superspeed_capable_ports" = "0x0000000f" + register "xhci_overcurrent_mapping" = "0x00000c03" + register "xhci_switchable_ports" = "0x0000000f" + device pci 14.0 on # USB 3.0 Controller + subsystemid 0x144d 0xc0d8 + end + device pci 16.0 on # Management Engine Interface 1 + subsystemid 0x144d 0xc0d8 + end + device pci 16.1 off # Management Engine Interface 2 + end + device pci 16.2 off # Management Engine IDE-R + end + device pci 16.3 off # Management Engine KT + end + device pci 19.0 off # Intel Gigabit Ethernet + end + device pci 1a.0 on # USB2 EHCI #2 + subsystemid 0x144d 0xc0d8 + end + device pci 1b.0 on # High Definition Audio Audio controller + subsystemid 0x144d 0xc0d8 + end + device pci 1c.0 on # PCIe Port #1 + subsystemid 0x144d 0xc0d8 + end + device pci 1c.1 on # PCIe Port #2 + subsystemid 0x144d 0xc0d8 + end + device pci 1c.2 off # PCIe Port #3 + end + device pci 1c.3 off # PCIe Port #4 + end + device pci 1c.4 off # PCIe Port #5 + end + device pci 1c.5 off # PCIe Port #6 + end + device pci 1c.6 off # PCIe Port #7 + end + device pci 1c.7 off # PCIe Port #8 + end + device pci 1d.0 on # USB2 EHCI #1 + subsystemid 0x144d 0xc0d8 + end + device pci 1e.0 off # PCI bridge + end + device pci 1f.0 on # LPC bridge PCI-LPC bridge + subsystemid 0x144d 0xc0d8 + end + device pci 1f.2 on # SATA Controller 1 + subsystemid 0x144d 0xc0d8 + end + device pci 1f.3 on # SMBus + subsystemid 0x144d 0xc0d8 + end + device pci 1f.5 off # SATA Controller 2 + end + device pci 1f.6 off # Thermal + end + end + device pci 00.0 on # Host bridge Host bridge + subsystemid 0x144d 0xc0d8 + end + device pci 01.0 on # PCIe Bridge for discrete graphics + subsystemid 0x144d 0xc0d8 + end + device pci 02.0 on # Internal graphics VGA controller + subsystemid 0x144d 0xc0d8 + end + end +end diff --git a/src/mainboard/samsung/350v5c/dsdt.asl b/src/mainboard/samsung/350v5c/dsdt.asl new file mode 100644 index 0000000..fb55547 --- /dev/null +++ b/src/mainboard/samsung/350v5c/dsdt.asl @@ -0,0 +1,30 @@ +#define BRIGHTNESS_UP \_SB.PCI0.GFX0.INCB +#define BRIGHTNESS_DOWN \_SB.PCI0.GFX0.DECB +#define ACPI_VIDEO_DEVICE \_SB.PCI0.GFX0 +#include <arch/acpi.h> +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI 2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20141018 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + #include <cpu/intel/model_206ax/acpi/cpu.asl> + #include <southbridge/intel/bd82x6x/acpi/platform.asl> + /* global NVS and variables. */ + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> + + Scope (\_SB) { + Device (PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <drivers/intel/gma/acpi/default_brightness_levels.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } + } +} diff --git a/src/mainboard/samsung/350v5c/gnvs.c b/src/mainboard/samsung/350v5c/gnvs.c new file mode 100644 index 0000000..6b731cc --- /dev/null +++ b/src/mainboard/samsung/350v5c/gnvs.c @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/bd82x6x/nvs.h> + +/* FIXME: check this function. */ +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + // the lid is open by default. + gnvs->lids = 1; + + gnvs->tcrt = 100; + gnvs->tpsv = 90; +} diff --git a/src/mainboard/samsung/350v5c/gpio.c b/src/mainboard/samsung/350v5c/gpio.c new file mode 100644 index 0000000..6bf860f --- /dev/null +++ b/src/mainboard/samsung/350v5c/gpio.c @@ -0,0 +1,232 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_NATIVE, + .gpio11 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_NATIVE, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_NATIVE, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_NATIVE, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_NATIVE, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_NATIVE, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_OUTPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio4 = GPIO_LEVEL_LOW, + .gpio12 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_LOW, + .gpio27 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, + .gpio29 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { + .gpio24 = GPIO_RESET_RSMRST, + .gpio30 = GPIO_RESET_RSMRST, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio1 = GPIO_INVERT, + .gpio3 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, + .gpio8 = GPIO_INVERT, + .gpio15 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, + .gpio33 = GPIO_MODE_NATIVE, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_NATIVE, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_GPIO, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_GPIO, + .gpio46 = GPIO_MODE_GPIO, + .gpio47 = GPIO_MODE_NATIVE, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_GPIO, + .gpio51 = GPIO_MODE_GPIO, + .gpio52 = GPIO_MODE_GPIO, + .gpio53 = GPIO_MODE_GPIO, + .gpio54 = GPIO_MODE_GPIO, + .gpio55 = GPIO_MODE_GPIO, + .gpio56 = GPIO_MODE_GPIO, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_GPIO, + .gpio61 = GPIO_MODE_GPIO, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio34 = GPIO_DIR_OUTPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio37 = GPIO_DIR_OUTPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio42 = GPIO_DIR_OUTPUT, + .gpio45 = GPIO_DIR_INPUT, + .gpio46 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_OUTPUT, + .gpio50 = GPIO_DIR_OUTPUT, + .gpio51 = GPIO_DIR_OUTPUT, + .gpio52 = GPIO_DIR_OUTPUT, + .gpio53 = GPIO_DIR_OUTPUT, + .gpio54 = GPIO_DIR_OUTPUT, + .gpio55 = GPIO_DIR_OUTPUT, + .gpio56 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio60 = GPIO_DIR_OUTPUT, + .gpio61 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio34 = GPIO_LEVEL_LOW, + .gpio35 = GPIO_LEVEL_HIGH, + .gpio37 = GPIO_LEVEL_LOW, + .gpio42 = GPIO_LEVEL_LOW, + .gpio49 = GPIO_LEVEL_LOW, + .gpio50 = GPIO_LEVEL_HIGH, + .gpio51 = GPIO_LEVEL_HIGH, + .gpio52 = GPIO_LEVEL_HIGH, + .gpio53 = GPIO_LEVEL_HIGH, + .gpio54 = GPIO_LEVEL_HIGH, + .gpio55 = GPIO_LEVEL_HIGH, + .gpio60 = GPIO_LEVEL_HIGH, + .gpio61 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, + .gpio65 = GPIO_MODE_NATIVE, + .gpio66 = GPIO_MODE_GPIO, + .gpio67 = GPIO_MODE_GPIO, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_NATIVE, + .gpio71 = GPIO_MODE_NATIVE, + .gpio72 = GPIO_MODE_NATIVE, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_GPIO, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio66 = GPIO_DIR_OUTPUT, + .gpio67 = GPIO_DIR_INPUT, + .gpio68 = GPIO_DIR_OUTPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio74 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio66 = GPIO_LEVEL_LOW, + .gpio68 = GPIO_LEVEL_LOW, + .gpio74 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/samsung/350v5c/hda_verb.c b/src/mainboard/samsung/350v5c/hda_verb.c new file mode 100644 index 0000000..d05fc02 --- /dev/null +++ b/src/mainboard/samsung/350v5c/hda_verb.c @@ -0,0 +1,76 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + 0x10ec0269, /* Codec Vendor / Device ID: Realtek */ + 0x144dc0d8, /* Subsystem ID */ + + 0x0000000b, /* Number of 4 dword sets */ + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x0, 0x144dc0d8), + + /* NID 0x12. */ + AZALIA_PIN_CFG(0x0, 0x12, 0x411111f0), + + /* NID 0x14. */ + AZALIA_PIN_CFG(0x0, 0x14, 0x90170110), + + /* NID 0x15. */ + AZALIA_PIN_CFG(0x0, 0x15, 0x0421101f), + + /* NID 0x17. */ + AZALIA_PIN_CFG(0x0, 0x17, 0x411111f0), + + /* NID 0x18. */ + AZALIA_PIN_CFG(0x0, 0x18, 0x04a11820), + + /* NID 0x19. */ + AZALIA_PIN_CFG(0x0, 0x19, 0x90a7092f), + + /* NID 0x1a. */ + AZALIA_PIN_CFG(0x0, 0x1a, 0x411111f0), + + /* NID 0x1b. */ + AZALIA_PIN_CFG(0x0, 0x1b, 0x411111f0), + + /* NID 0x1d. */ + AZALIA_PIN_CFG(0x0, 0x1d, 0x4005822d), + + /* NID 0x1e. */ + AZALIA_PIN_CFG(0x0, 0x1e, 0x411111f0), + 0x80862806, /* Codec Vendor / Device ID: Intel */ + 0x144dc0d8, /* Subsystem ID */ + + 0x00000004, /* Number of 4 dword sets */ + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x3, 0x144dc0d8), + + /* NID 0x05. */ + AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), + + /* NID 0x06. */ + AZALIA_PIN_CFG(0x3, 0x06, 0x58560020), + + /* NID 0x07. */ + AZALIA_PIN_CFG(0x3, 0x07, 0x58560030), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/samsung/350v5c/mainboard.c b/src/mainboard/samsung/350v5c/mainboard.c new file mode 100644 index 0000000..44f4fa4 --- /dev/null +++ b/src/mainboard/samsung/350v5c/mainboard.c @@ -0,0 +1,50 @@ +#include <device/device.h> +#include <drivers/intel/gma/int15.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <ec/acpi/ec.h> +#include <console/console.h> +#include <pc80/keyboard.h> + +static void mainboard_init(struct device *dev) +{ + /* FIXME: trim this down or remove if necessary */ + { + int i; + const u8 dmp[256] = { + /* 00 */ 0x00, 0x00, 0x01, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 10 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 20 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 30 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 40 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 50 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 60 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 70 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 80 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 90 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* a0 */ 0x00, 0x04, 0x00, 0x84, 0xc1, 0x00, 0x00, 0x61, 0x64, 0x00, 0x00, 0x08, 0x64, 0x19, 0x00, 0xd8, + /* b0 */ 0x00, 0x00, 0xff, 0x33, 0x01, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x0f, 0x00, 0x4b, 0x00, 0x00, + /* c0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* d0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* e0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* f0 */ 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + }; + + printk(BIOS_DEBUG, "Replaying EC dump ..."); + for (i = 0; i < 256; i++) + ec_write (i, dmp[i]); + printk(BIOS_DEBUG, "done\n"); + } + pc_keyboard_init(NO_AUX_DEVICE); +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->init = mainboard_init; + + /* FIXME: fix those values*/ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/samsung/350v5c/romstage.c b/src/mainboard/samsung/350v5c/romstage.c new file mode 100644 index 0000000..860b045 --- /dev/null +++ b/src/mainboard/samsung/350v5c/romstage.c @@ -0,0 +1,82 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdint.h> +#include <string.h> +#include <lib.h> +#include <timestamp.h> +#include <arch/byteorder.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <arch/acpi.h> +#include <console/console.h> +#include "northbridge/intel/sandybridge/sandybridge.h" +#include "northbridge/intel/sandybridge/raminit_native.h" +#include "southbridge/intel/bd82x6x/pch.h" +#include <southbridge/intel/common/gpio.h> +#include <arch/cpu.h> +#include <cpu/x86/msr.h> + +void pch_enable_lpc(void) +{ + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3c00); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x84, 0x00040069); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x88, 0x0004fd61); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x8c, 0x00000000); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x90, 0x00000000); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0000); +} + +void mainboard_rcba_config(void) +{ +} + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 1, 0 }, + { 1, 1, 0 }, + { 1, 1, 1 }, + { 1, 1, 1 }, + { 0, 0, 2 }, + { 0, 0, 2 }, + { 0, 0, 3 }, + { 0, 0, 3 }, + { 1, 1, 4 }, + { 1, 1, 4 }, + { 0, 0, 5 }, + { 1, 0, 5 }, + { 0, 0, 6 }, + { 0, 0, 6 }, +}; + +void mainboard_early_init(int s3resume) +{ +} + +void mainboard_config_superio(void) +{ +} + +/* FIXME: Put proper SPD map here. */ +void mainboard_get_spd(spd_raw_data *spd, bool id_only) +{ + read_spd(&spd[0], 0x50, id_only); + read_spd(&spd[1], 0x51, id_only); + read_spd(&spd[2], 0x52, id_only); + read_spd(&spd[3], 0x53, id_only); +} -- To view, visit https://review.coreboot.org/c/coreboot/+/30942 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I64fcf931938fb3b158b9576b787f452bf6077843 Gerrit-Change-Number: 30942 Gerrit-PatchSet: 1 Gerrit-Owner: Kacper Słomiński <kacper.slominski72(a)gmail.com> Gerrit-MessageType: newchange

6 25

Change in ...coreboot[master]: mb/gigabyte: add GA-P67A-UD3R
by James (Code Review) June 8, 2024

June 8, 2024

James has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31363 Change subject: mb/gigabyte: add GA-P67A-UD3R ...................................................................... mb/gigabyte: add GA-P67A-UD3R This is a Intel P67 chipset motherboard for Sandy Bridge processors. The P67 chipset has no graphics support. This board has redundant 4MB SOIC-8 flash chips, and flashrom is usable with the vendor BIOS. This is an original P67 chipset, and is affected by a SATA 2 hardware bug. There is a variant P67A-UD3R-B3 that is unaffected. The function of PCIe ports PCIEX4 and PCIEX1_* are configured in PCHSTRP9. By default, PCIEX4 is configured for 4 lanes and PCIEX1_* are disabled. This can be switched to 1 lane for all ports. Tested and working: - Intel Core i7 2600 - 4 DIMMs (4x4GB DDR3) - Booting Linux (SeaBIOS) - Native RAM init - PCIe graphics - Onboard Ethernet - Sensors (SuperIO) - S3 sleep - S4 hibernate - SATA 3 - USB 2.0 - USB 3.0 - Onboard audio (speakers, headphones) - CMOS - EHCI debug port - Serial port Not tested: - SATA 2 - PS/2 keyboard/mouse - Digital audio Change-Id: I4fbf50376be3184bf01a3bc8aae09bce54676707 Signed-off-by: James Ye <jye836(a)gmail.com> --- A src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig A src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig.name A src/mainboard/gigabyte/ga-p67a-ud3r/Makefile.inc A src/mainboard/gigabyte/ga-p67a-ud3r/acpi/ec.asl A src/mainboard/gigabyte/ga-p67a-ud3r/acpi/mainboard.asl A src/mainboard/gigabyte/ga-p67a-ud3r/acpi/platform.asl A src/mainboard/gigabyte/ga-p67a-ud3r/acpi/superio.asl A src/mainboard/gigabyte/ga-p67a-ud3r/acpi_tables.c A src/mainboard/gigabyte/ga-p67a-ud3r/board_info.txt A src/mainboard/gigabyte/ga-p67a-ud3r/cmos.default A src/mainboard/gigabyte/ga-p67a-ud3r/cmos.layout A src/mainboard/gigabyte/ga-p67a-ud3r/devicetree.cb A src/mainboard/gigabyte/ga-p67a-ud3r/dsdt.asl A src/mainboard/gigabyte/ga-p67a-ud3r/gpio.c A src/mainboard/gigabyte/ga-p67a-ud3r/hda_verb.c A src/mainboard/gigabyte/ga-p67a-ud3r/romstage.c 16 files changed, 781 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/63/31363/1 diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig b/src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig new file mode 100644 index 0000000..c1efe12 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig @@ -0,0 +1,40 @@ +if BOARD_GIGABYTE_GA_P67A_UD3R + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_4096 + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select NORTHBRIDGE_INTEL_SANDYBRIDGE + select SERIRQ_CONTINUOUS_MODE + select SOUTHBRIDGE_INTEL_BD82X6X + select USE_NATIVE_RAMINIT + select SUPERIO_ITE_IT8728F + +config MAINBOARD_DIR + string + default "gigabyte/ga-p67a-ud3r" + +config MAINBOARD_PART_NUMBER + string + default "GA-P67A-UD3R" + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0x5001 + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x1458 + +config MAX_CPUS + int + default 8 + +config USBDEBUG_HCD_INDEX + int + default 2 + +endif # BOARD_GIGABYTE_GA_P67A_UD3R diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig.name b/src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig.name new file mode 100644 index 0000000..15f0655 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_GIGABYTE_GA_P67A_UD3R + bool "GA-P67A-UD3R" diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/Makefile.inc b/src/mainboard/gigabyte/ga-p67a-ud3r/Makefile.inc new file mode 100644 index 0000000..3dae61e --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/Makefile.inc @@ -0,0 +1 @@ +romstage-y += gpio.c diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/ec.asl b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/ec.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/ec.asl diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/mainboard.asl b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/mainboard.asl new file mode 100644 index 0000000..34de86f --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/mainboard.asl @@ -0,0 +1,23 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Scope (\_SB) +{ + Device (PWRB) + { + Name (_HID, EisaId("PNP0C0C")) + } +} diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/platform.asl b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/platform.asl new file mode 100644 index 0000000..d8d3320 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/platform.asl @@ -0,0 +1,29 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + Return(Package(){0,0}) +} diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/superio.asl b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/superio.asl new file mode 100644 index 0000000..2b20c77 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/superio.asl @@ -0,0 +1,16 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 James Ye <jye836(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <drivers/pc80/pc/ps2_controller.asl> diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/acpi_tables.c b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi_tables.c new file mode 100644 index 0000000..a2f383b --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi_tables.c @@ -0,0 +1,29 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/bd82x6x/nvs.h> + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; +} diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/board_info.txt b/src/mainboard/gigabyte/ga-p67a-ud3r/board_info.txt new file mode 100644 index 0000000..c6f16ae --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/board_info.txt @@ -0,0 +1,7 @@ +Category: desktop +Board URL: https://www.gigabyte.com/Motherboard/GA-P67A-UD3R-rev-10 +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y +Release year: 2011 diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/cmos.default b/src/mainboard/gigabyte/ga-p67a-ud3r/cmos.default new file mode 100644 index 0000000..60de212 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/cmos.default @@ -0,0 +1,5 @@ +boot_option=Fallback +debug_level=Debug +nmi=Enable +power_on_after_fail=Disable +sata_mode=AHCI diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/cmos.layout b/src/mainboard/gigabyte/ga-p67a-ud3r/cmos.layout new file mode 100644 index 0000000..4e5c0a8 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/cmos.layout @@ -0,0 +1,107 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## Copyright (C) 2014 Vladimir Serbinenko +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +# ----------------------------------------------------------------- +entries + +# ----------------------------------------------------------------- +# Status Register A +# ----------------------------------------------------------------- +# Status Register B +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 3 boot_option +388 4 h 0 reboot_counter + +# ----------------------------------------------------------------- +# coreboot config options: console +#392 3 r 0 unused +395 4 e 4 debug_level +#399 1 r 0 unused + +#400 8 r 0 reserved for century byte + +# coreboot config options: southbridge +#400 1 e 0 unused +408 1 e 1 nmi +409 2 e 5 power_on_after_fail +411 1 e 6 sata_mode + +# coreboot config options: northbridge +#432 3 r 0 unused + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 +960 16 r 0 mrc_scrambler_seed_chk + +# coreboot config options: check sums +984 16 h 0 check_sum + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable + +2 0 Enable +2 1 Disable + +3 0 Fallback +3 1 Normal + +4 0 Emergency +4 1 Alert +4 2 Critical +4 3 Error +4 4 Warning +4 5 Notice +4 6 Info +4 7 Debug +4 8 Spew + +5 0 Disable +5 1 Enable +5 2 Keep + +6 0 AHCI +6 1 Compatible + +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/devicetree.cb b/src/mainboard/gigabyte/ga-p67a-ud3r/devicetree.cb new file mode 100644 index 0000000..4ed458d --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/devicetree.cb @@ -0,0 +1,124 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2019 James Ye <jye836(a)gmail.com> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +# +chip northbridge/intel/sandybridge + device cpu_cluster 0x0 on + chip cpu/intel/model_206ax + device lapic 0x0 on end + + # Magic APIC ID to locate this chip + device lapic 0xacac off end + + register "c1_acpower" = "1" + register "c2_acpower" = "3" + register "c3_acpower" = "5" + + register "c1_battery" = "1" + register "c2_battery" = "3" + register "c3_battery" = "5" + end + end + + device domain 0x0 on + subsystemid 0x1458 0x5001 inherit + + device pci 00.0 on end # Host bridge + device pci 01.0 on # PCIe bridge (PCIEX16) + subsystemid 0x1458 0x5000 + end + device pci 02.0 off end # Internal graphics + + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "sata_port_map" = "0x3f" + register "sata_interface_speed_support" = "0x3" + + register "gen1_dec" = "0x000c0801" + register "gen2_dec" = "0x000c0291" + + register "pcie_port_coalesce" = "0" + register "c2_latency" = "0x0065" + register "p_cnt_throttling_supported" = "1" + + register "spi_lvscc" = "0x2005" + register "spi_uvscc" = "0x2005" + + device pci 16.0 off end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 off end # Intel Gigabit Ethernet + device pci 1a.0 on # USB2 EHCI #2 + subsystemid 0x1458 0x5006 + end + device pci 1b.0 on # High Definition Audio controller + subsystemid 0x1458 0xa102 + end + device pci 1c.0 on end # Unrouted, to disable coalescing + device pci 1c.1 on # PCIe Port #2 + device pci 00.0 on # USB 3.0 controller + subsystemid 0x1458 0x5007 + end + end + device pci 1c.2 on # PCIe Port #3 + device pci 00.0 on # Ethernet controller + subsystemid 0x1458 0xe000 + end + end + device pci 1c.3 on # PCIe Port #4 + device pci 00.0 on # PCI bridge + subsystemid 0x1458 0x5000 + end + end + device pci 1c.4 on end # PCIe Port #5 (PCIEX4) + device pci 1c.5 off end # PCIe Port #6 (PCIEX1_1) + device pci 1c.6 off end # PCIe Port #7 (PCIEX1_2) + device pci 1c.7 off end # PCIe Port #8 (PCIEX1_3) + device pci 1d.0 on # USB2 EHCI #1 + subsystemid 0x1458 0x5006 + end + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on # LPC bridge + chip superio/ite/it8728f + device pnp 2e.0 off end # Floppy, not routed + device pnp 2e.1 on # COM1 + io 0x60 = 0x03f8 + irq 0x70 = 4 + end + device pnp 2e.2 off end # COM2, not routed + device pnp 2e.3 off end # Parallel port, not rounted + device pnp 2e.4 on # Environment Controller + io 0x60 = 0x0290 + io 0x62 = 0x0 + irq 0x70 = 0 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 off end # Mouse + device pnp 2e.7 off end # GPIO + device pnp 2e.a off end # CIR, not routed + end + end + device pci 1f.2 on # SATA Controller 1 + subsystemid 0x1458 0xb005 + end + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # SATA Controller 2 + device pci 1f.6 off end # Thermal + end + end +end diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/dsdt.asl b/src/mainboard/gigabyte/ga-p67a-ud3r/dsdt.asl new file mode 100644 index 0000000..365a0fa --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/dsdt.asl @@ -0,0 +1,45 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 James Ye <jye836(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/acpi.h> +DefinitionBlock ( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI 2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20141018 // OEM revision +) +{ + // Some generic macros + #include "acpi/mainboard.asl" + #include "acpi/platform.asl" + #include "acpi/superio.asl" + #include <cpu/intel/common/acpi/cpu.asl> + #include <southbridge/intel/bd82x6x/acpi/platform.asl> + + // Global NVS and variables + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + + // Chipset specific sleep states + #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> + + Device (\_SB.PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <drivers/intel/gma/acpi/default_brightness_levels.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } +} diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/gpio.c b/src/mainboard/gigabyte/ga-p67a-ud3r/gpio.c new file mode 100644 index 0000000..c65f432 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/gpio.c @@ -0,0 +1,204 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * Copyright (C) 2019 James Ye <jye836(a)gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_NATIVE, + .gpio3 = GPIO_MODE_NATIVE, + .gpio4 = GPIO_MODE_NATIVE, + .gpio5 = GPIO_MODE_NATIVE, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_NATIVE, + .gpio11 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_NATIVE, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_GPIO, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_NATIVE, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_INPUT, + .gpio31 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio8 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_LOW, + .gpio24 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { + .gpio24 = GPIO_RESET_RSMRST, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio11 = GPIO_INVERT, + .gpio13 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_GPIO, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_NATIVE, + .gpio47 = GPIO_MODE_GPIO, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_NATIVE, + .gpio51 = GPIO_MODE_NATIVE, + .gpio52 = GPIO_MODE_NATIVE, + .gpio53 = GPIO_MODE_NATIVE, + .gpio54 = GPIO_MODE_NATIVE, + .gpio55 = GPIO_MODE_NATIVE, + .gpio56 = GPIO_MODE_NATIVE, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_NATIVE, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_OUTPUT, + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_INPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio47 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_LOW, + .gpio33 = GPIO_LEVEL_HIGH, + .gpio35 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, + .gpio65 = GPIO_MODE_NATIVE, + .gpio66 = GPIO_MODE_NATIVE, + .gpio67 = GPIO_MODE_NATIVE, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_NATIVE, + .gpio71 = GPIO_MODE_NATIVE, + .gpio72 = GPIO_MODE_GPIO, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_NATIVE, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio72 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/hda_verb.c b/src/mainboard/gigabyte/ga-p67a-ud3r/hda_verb.c new file mode 100644 index 0000000..a843a2b --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/hda_verb.c @@ -0,0 +1,74 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * Copyright (C) 2019 James Ye <jye836(a)gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + 0x10ec0892, /* Codec Vendor / Device ID: Realtek */ + 0x1458a022, /* Subsystem ID */ + + 15, /* Number of 4 dword sets */ + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x2, 0x1458a022), + + /* NID 0x11. */ + AZALIA_PIN_CFG(0x2, 0x11, 0x99430140), + + /* NID 0x12. */ + AZALIA_PIN_CFG(0x2, 0x12, 0x411111f0), + + /* NID 0x14. */ + AZALIA_PIN_CFG(0x2, 0x14, 0x01014410), + + /* NID 0x15. */ + AZALIA_PIN_CFG(0x2, 0x15, 0x01011412), + + /* NID 0x16. */ + AZALIA_PIN_CFG(0x2, 0x16, 0x01016411), + + /* NID 0x17. */ + AZALIA_PIN_CFG(0x2, 0x17, 0x01012414), + + /* NID 0x18. */ + AZALIA_PIN_CFG(0x2, 0x18, 0x01a19c50), + + /* NID 0x19. */ + AZALIA_PIN_CFG(0x2, 0x19, 0x02a19c60), + + /* NID 0x1a. */ + AZALIA_PIN_CFG(0x2, 0x1a, 0x0181345f), + + /* NID 0x1b. */ + AZALIA_PIN_CFG(0x2, 0x1b, 0x02214c20), + + /* NID 0x1c. */ + AZALIA_PIN_CFG(0x2, 0x1c, 0x593301f0), + + /* NID 0x1d. */ + AZALIA_PIN_CFG(0x2, 0x1d, 0x4005e601), + + /* NID 0x1e. */ + AZALIA_PIN_CFG(0x2, 0x1e, 0x014b6130), + + /* NID 0x1f. */ + AZALIA_PIN_CFG(0x2, 0x1f, 0x411111f0), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/romstage.c b/src/mainboard/gigabyte/ga-p67a-ud3r/romstage.c new file mode 100644 index 0000000..3037b73 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/romstage.c @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * Copyright (C) 2019 James Ye <jye836(a)gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <northbridge/intel/sandybridge/raminit_native.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <superio/ite/common/ite.h> +#include <superio/ite/it8728f/it8728f.h> + +#define SUPERIO_BASE 0x2e +#define SUPERIO_GPIO PNP_DEV(SUPERIO_BASE, IT8728F_GPIO) +#define SERIAL_DEV PNP_DEV(SUPERIO_BASE, 0x01) + +void pch_enable_lpc(void) +{ + pci_write_config16(PCH_LPC_DEV, LPC_EN, KBC_LPC_EN | CNF1_LPC_EN | + CNF2_LPC_EN | COMA_LPC_EN); +} + +void mainboard_rcba_config(void) +{ +} + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 1, 0 }, + { 1, 1, 0 }, + { 1, 1, 1 }, + { 1, 1, 1 }, + { 1, 6, 2 }, + { 1, 6, 2 }, + { 1, 6, 3 }, + { 1, 5, 3 }, + { 1, 5, 4 }, + { 1, 5, 4 }, + { 1, 5, 5 }, + { 1, 5, 5 }, + { 1, 5, 6 }, + { 1, 5, 6 }, +}; + +void mainboard_early_init(int s3resume) +{ +} + +void mainboard_config_superio(void) +{ + /* Enable serial port */ + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + /* Disable SIO WDT which kicks in DualBIOS */ + ite_reg_write(SUPERIO_GPIO, 0xEF, 0x7E); +} + +void mainboard_get_spd(spd_raw_data *spd, bool id_only) +{ + read_spd(&spd[0], 0x50, id_only); + read_spd(&spd[1], 0x51, id_only); + read_spd(&spd[2], 0x52, id_only); + read_spd(&spd[3], 0x53, id_only); +} -- To view, visit https://review.coreboot.org/c/coreboot/+/31363 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I4fbf50376be3184bf01a3bc8aae09bce54676707 Gerrit-Change-Number: 31363 Gerrit-PatchSet: 1 Gerrit-Owner: James <jye836(a)gmail.com> Gerrit-MessageType: newchange

6 24

Change in ...coreboot[master]: mb/*/romstage: Drop defines already set by raminit code
by Patrick Rudolph (Code Review) Aug. 7, 2023

Aug. 7, 2023

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32070 Change subject: mb/*/romstage: Drop defines already set by raminit code ...................................................................... mb/*/romstage: Drop defines already set by raminit code Drop defines that are set by raminit code. Change-Id: Ica844a70b50486b4db3744cb123b3e4b8d5bedb0 Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M src/mainboard/asrock/h81m-hds/romstage.c M src/mainboard/google/beltino/romstage.c M src/mainboard/google/butterfly/romstage.c M src/mainboard/google/link/romstage.c M src/mainboard/google/parrot/romstage.c M src/mainboard/google/slippy/variants/falco/romstage.c M src/mainboard/google/slippy/variants/leon/romstage.c M src/mainboard/google/slippy/variants/peppy/romstage.c M src/mainboard/google/slippy/variants/wolf/romstage.c M src/mainboard/google/stout/romstage.c M src/mainboard/intel/dcp847ske/romstage.c M src/mainboard/intel/emeraldlake2/romstage.c M src/mainboard/kontron/ktqm77/romstage.c M src/mainboard/lenovo/x220/romstage.c M src/mainboard/roda/rv11/variants/rv11/romstage.c M src/mainboard/roda/rv11/variants/rw11/romstage.c M src/mainboard/samsung/lumpy/romstage.c M src/mainboard/samsung/stumpy/romstage.c M src/mainboard/supermicro/x10slm-f/romstage.c 19 files changed, 0 insertions(+), 265 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/70/32070/1 diff --git a/src/mainboard/asrock/h81m-hds/romstage.c b/src/mainboard/asrock/h81m-hds/romstage.c index a917722..68ed658 100644 --- a/src/mainboard/asrock/h81m-hds/romstage.c +++ b/src/mainboard/asrock/h81m-hds/romstage.c @@ -74,20 +74,6 @@ { struct pei_data pei_data = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, - .system_type = 1, /* desktop/server */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0x00, 0xa4, 0x00 }, .ec_present = 0, .dimm_channel0_disabled = 2, /* Disable DIMM 1 on channel 0. */ diff --git a/src/mainboard/google/beltino/romstage.c b/src/mainboard/google/beltino/romstage.c index 70a8c19..6417f0d 100644 --- a/src/mainboard/google/beltino/romstage.c +++ b/src/mainboard/google/beltino/romstage.c @@ -71,20 +71,6 @@ { struct pei_data pei_data = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, - .system_type = 5, /* ULT */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0x00, 0xa4, 0x00 }, .ec_present = 0, // 0 = leave channel enabled diff --git a/src/mainboard/google/butterfly/romstage.c b/src/mainboard/google/butterfly/romstage.c index d34b1e4..cbd9f3d 100644 --- a/src/mainboard/google/butterfly/romstage.c +++ b/src/mainboard/google/butterfly/romstage.c @@ -132,20 +132,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xA0, 0x00,0xA4,0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/google/link/romstage.c b/src/mainboard/google/link/romstage.c index 66a503d0..6617dc4 100644 --- a/src/mainboard/google/link/romstage.c +++ b/src/mainboard/google/link/romstage.c @@ -127,20 +127,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, .ddr3lv_support = 1, diff --git a/src/mainboard/google/parrot/romstage.c b/src/mainboard/google/parrot/romstage.c index 76a4b4b..d76d814 100644 --- a/src/mainboard/google/parrot/romstage.c +++ b/src/mainboard/google/parrot/romstage.c @@ -101,20 +101,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xA0, 0x00,0xA4,0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/google/slippy/variants/falco/romstage.c b/src/mainboard/google/slippy/variants/falco/romstage.c index 25f8d27..2244119 100644 --- a/src/mainboard/google/slippy/variants/falco/romstage.c +++ b/src/mainboard/google/slippy/variants/falco/romstage.c @@ -109,20 +109,6 @@ { struct pei_data pei_data = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, - .system_type = 5, /* ULT */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xff, 0x00, 0xff, 0x00 }, .ec_present = 1, // 0 = leave channel enabled diff --git a/src/mainboard/google/slippy/variants/leon/romstage.c b/src/mainboard/google/slippy/variants/leon/romstage.c index b95c6e1..35345d0 100644 --- a/src/mainboard/google/slippy/variants/leon/romstage.c +++ b/src/mainboard/google/slippy/variants/leon/romstage.c @@ -106,20 +106,6 @@ { struct pei_data pei_data = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, - .system_type = 5, /* ULT */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xff, 0x00, 0xff, 0x00 }, .ec_present = 1, // 0 = leave channel enabled diff --git a/src/mainboard/google/slippy/variants/peppy/romstage.c b/src/mainboard/google/slippy/variants/peppy/romstage.c index e47edc7..a5de6c0 100644 --- a/src/mainboard/google/slippy/variants/peppy/romstage.c +++ b/src/mainboard/google/slippy/variants/peppy/romstage.c @@ -124,20 +124,6 @@ { struct pei_data pei_data = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, - .system_type = 5, /* ULT */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xff, 0x00, 0xff, 0x00 }, .ec_present = 1, // 0 = leave channel enabled diff --git a/src/mainboard/google/slippy/variants/wolf/romstage.c b/src/mainboard/google/slippy/variants/wolf/romstage.c index 3125efe..5a8c972 100644 --- a/src/mainboard/google/slippy/variants/wolf/romstage.c +++ b/src/mainboard/google/slippy/variants/wolf/romstage.c @@ -111,20 +111,7 @@ { struct pei_data pei_data = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, .system_type = 5, /* ULT */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xff, 0x00, 0xff, 0x00 }, .ec_present = 1, // 0 = leave channel enabled diff --git a/src/mainboard/google/stout/romstage.c b/src/mainboard/google/stout/romstage.c index 7539dd7..6e32145 100644 --- a/src/mainboard/google/stout/romstage.c +++ b/src/mainboard/google/stout/romstage.c @@ -137,20 +137,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xA0, 0x00,0xA4,0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/intel/dcp847ske/romstage.c b/src/mainboard/intel/dcp847ske/romstage.c index 24ec912..2043cf6 100644 --- a/src/mainboard/intel/dcp847ske/romstage.c +++ b/src/mainboard/intel/dcp847ske/romstage.c @@ -29,20 +29,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0x00, 0xa2, 0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 0, diff --git a/src/mainboard/intel/emeraldlake2/romstage.c b/src/mainboard/intel/emeraldlake2/romstage.c index 9a9fc24..8cd7ec2 100644 --- a/src/mainboard/intel/emeraldlake2/romstage.c +++ b/src/mainboard/intel/emeraldlake2/romstage.c @@ -94,20 +94,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0x00, 0xa4, 0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 0, diff --git a/src/mainboard/kontron/ktqm77/romstage.c b/src/mainboard/kontron/ktqm77/romstage.c index f778f96..e0f8954 100644 --- a/src/mainboard/kontron/ktqm77/romstage.c +++ b/src/mainboard/kontron/ktqm77/romstage.c @@ -80,20 +80,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, /* 0 Mobile, 1 Desktop/Server */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xA0, 0x00,0xA4,0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/lenovo/x220/romstage.c b/src/mainboard/lenovo/x220/romstage.c index a5b0c81..d398d81 100644 --- a/src/mainboard/lenovo/x220/romstage.c +++ b/src/mainboard/lenovo/x220/romstage.c @@ -50,20 +50,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0x00,0xa2,0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/roda/rv11/variants/rv11/romstage.c b/src/mainboard/roda/rv11/variants/rv11/romstage.c index 685e942..df679f1 100644 --- a/src/mainboard/roda/rv11/variants/rv11/romstage.c +++ b/src/mainboard/roda/rv11/variants/rv11/romstage.c @@ -37,20 +37,6 @@ { const struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xA0, 0x00, 0xA4, 0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/roda/rv11/variants/rw11/romstage.c b/src/mainboard/roda/rv11/variants/rw11/romstage.c index 97d9d2b..56ac32c 100644 --- a/src/mainboard/roda/rv11/variants/rw11/romstage.c +++ b/src/mainboard/roda/rv11/variants/rw11/romstage.c @@ -66,20 +66,6 @@ { const struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xA0, 0xA2, 0xA4, 0xA6 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/samsung/lumpy/romstage.c b/src/mainboard/samsung/lumpy/romstage.c index 1080689..29fe08b 100644 --- a/src/mainboard/samsung/lumpy/romstage.c +++ b/src/mainboard/samsung/lumpy/romstage.c @@ -156,20 +156,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0x00,0x00,0x00 }, .ts_addresses = { 0x30, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/samsung/stumpy/romstage.c b/src/mainboard/samsung/stumpy/romstage.c index a8e28d6..510efbe 100644 --- a/src/mainboard/samsung/stumpy/romstage.c +++ b/src/mainboard/samsung/stumpy/romstage.c @@ -144,20 +144,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0x00,0xa4,0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 0, diff --git a/src/mainboard/supermicro/x10slm-f/romstage.c b/src/mainboard/supermicro/x10slm-f/romstage.c index 84ad047..702e8bb 100644 --- a/src/mainboard/supermicro/x10slm-f/romstage.c +++ b/src/mainboard/supermicro/x10slm-f/romstage.c @@ -66,20 +66,6 @@ { struct pei_data pei_data = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, - .system_type = 1, /* desktop/server */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0xa2, 0xa4, 0xa6 }, .ec_present = 0, .ddr_refresh_2x = 1, -- To view, visit https://review.coreboot.org/c/coreboot/+/32070 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ica844a70b50486b4db3744cb123b3e4b8d5bedb0 Gerrit-Change-Number: 32070 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

4 13

Change in ...coreboot[master]: nb/intel/sandybridge: Introduce soc/iomap.h
by Patrick Rudolph (Code Review) Aug. 7, 2023

Aug. 7, 2023

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32075 Change subject: nb/intel/sandybridge: Introduce soc/iomap.h ...................................................................... nb/intel/sandybridge: Introduce soc/iomap.h Defines the memory ranges used by the northbridge in a separate header. Include the new header and rename the defines to match the one found in soc/intel/common. Change-Id: I93aa0e78ff52e46256debd26601600a96404509f Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M src/northbridge/intel/sandybridge/Makefile.inc M src/northbridge/intel/sandybridge/acpi.c M src/northbridge/intel/sandybridge/early_init.c A src/northbridge/intel/sandybridge/include/soc/iomap.h M src/northbridge/intel/sandybridge/northbridge.c M src/northbridge/intel/sandybridge/raminit_common.c M src/northbridge/intel/sandybridge/raminit_mrc.c M src/northbridge/intel/sandybridge/sandybridge.h 8 files changed, 92 insertions(+), 54 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/75/32075/1 diff --git a/src/northbridge/intel/sandybridge/Makefile.inc b/src/northbridge/intel/sandybridge/Makefile.inc index 54a4057..c3d9079 100644 --- a/src/northbridge/intel/sandybridge/Makefile.inc +++ b/src/northbridge/intel/sandybridge/Makefile.inc @@ -15,6 +15,8 @@ ifeq ($(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE)$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE),y) +CFLAGS_common += -Isrc/northbridge/intel/sandybridge/include + ramstage-y += ram_calc.c ramstage-y += northbridge.c ramstage-y += pcie.c diff --git a/src/northbridge/intel/sandybridge/acpi.c b/src/northbridge/intel/sandybridge/acpi.c index 4afb546..af2f37b 100644 --- a/src/northbridge/intel/sandybridge/acpi.c +++ b/src/northbridge/intel/sandybridge/acpi.c @@ -92,7 +92,8 @@ unsigned long tmp; tmp = current; - current += acpi_create_dmar_drhd(current, 0, 0, IOMMU_BASE1); + current += acpi_create_dmar_drhd(current, 0, 0, + GFXVT_BASE_ADDRESS); current += acpi_create_dmar_ds_pci(current, 0, 2, 0); current += acpi_create_dmar_ds_pci(current, 0, 2, 1); acpi_dmar_drhd_fixup(tmp, current); @@ -107,8 +108,8 @@ } const unsigned long tmp = current; - current += acpi_create_dmar_drhd(current, - DRHD_INCLUDE_PCI_ALL, 0, IOMMU_BASE2); + current += acpi_create_dmar_drhd(current, DRHD_INCLUDE_PCI_ALL, 0, + VTVC0_BASE_ADDRESS); current += acpi_create_dmar_ds_ioapic(current, 2, PCH_IOAPIC_PCI_BUS, PCH_IOAPIC_PCI_SLOT, 0); size_t i; diff --git a/src/northbridge/intel/sandybridge/early_init.c b/src/northbridge/intel/sandybridge/early_init.c index 5307a2c..2e0f087 100644 --- a/src/northbridge/intel/sandybridge/early_init.c +++ b/src/northbridge/intel/sandybridge/early_init.c @@ -35,20 +35,20 @@ return; /* setup BARs */ - MCHBAR32(0x5404) = IOMMU_BASE1 >> 32; - MCHBAR32(0x5400) = IOMMU_BASE1 | 1; - MCHBAR32(0x5414) = IOMMU_BASE2 >> 32; - MCHBAR32(0x5410) = IOMMU_BASE2 | 1; + MCHBAR32(0x5404) = GFXVT_BASE_ADDRESS >> 32; + MCHBAR32(0x5400) = GFXVT_BASE_ADDRESS | 1; + MCHBAR32(0x5414) = VTVC0_BASE_ADDRESS >> 32; + MCHBAR32(0x5410) = VTVC0_BASE_ADDRESS | 1; /* lock policies */ - write32((void *)(IOMMU_BASE1 + 0xff0), 0x80000000); + write32((void *)(GFXVT_BASE_ADDRESS + 0xff0), 0x80000000); const struct device *const azalia = pcidev_on_root(0x1b, 0); if (azalia && azalia->enabled) { - write32((void *)(IOMMU_BASE2 + 0xff0), 0x20000000); - write32((void *)(IOMMU_BASE2 + 0xff0), 0xa0000000); + write32((void *)(VTVC0_BASE_ADDRESS + 0xff0), 0x20000000); + write32((void *)(VTVC0_BASE_ADDRESS + 0xff0), 0xa0000000); } else { - write32((void *)(IOMMU_BASE2 + 0xff0), 0x80000000); + write32((void *)(VTVC0_BASE_ADDRESS + 0xff0), 0x80000000); } } @@ -67,12 +67,12 @@ { printk(BIOS_DEBUG, "Setting up static northbridge registers..."); /* Set up all hardcoded northbridge BARs */ - pci_write_config32(PCI_DEV(0, 0x00, 0), EPBAR, DEFAULT_EPBAR | 1); - pci_write_config32(PCI_DEV(0, 0x00, 0), EPBAR + 4, (0LL+DEFAULT_EPBAR) >> 32); - pci_write_config32(PCI_DEV(0, 0x00, 0), MCHBAR, (uintptr_t)DEFAULT_MCHBAR | 1); - pci_write_config32(PCI_DEV(0, 0x00, 0), MCHBAR + 4, (0LL+(uintptr_t)DEFAULT_MCHBAR) >> 32); - pci_write_config32(PCI_DEV(0, 0x00, 0), DMIBAR, (uintptr_t)DEFAULT_DMIBAR | 1); - pci_write_config32(PCI_DEV(0, 0x00, 0), DMIBAR + 4, (0LL+(uintptr_t)DEFAULT_DMIBAR) >> 32); + pci_write_config32(PCI_DEV(0, 0x00, 0), EPBAR, EP_BASE_ADDRESS | 1); + pci_write_config32(PCI_DEV(0, 0x00, 0), EPBAR + 4, EP_BASE_ADDRESS >> 32); + pci_write_config32(PCI_DEV(0, 0x00, 0), MCHBAR, MCH_BASE_ADDRESS | 1); + pci_write_config32(PCI_DEV(0, 0x00, 0), MCHBAR + 4, MCH_BASE_ADDRESS >> 32); + pci_write_config32(PCI_DEV(0, 0x00, 0), DMIBAR, DMI_BASE_ADDRESS | 1); + pci_write_config32(PCI_DEV(0, 0x00, 0), DMIBAR + 4, DMI_BASE_ADDRESS >> 32); printk(BIOS_DEBUG, " done\n"); } diff --git a/src/northbridge/intel/sandybridge/include/soc/iomap.h b/src/northbridge/intel/sandybridge/include/soc/iomap.h new file mode 100644 index 0000000..75fd9d9 --- /dev/null +++ b/src/northbridge/intel/sandybridge/include/soc/iomap.h @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _SOC_SANDYBRIDGE_IOMAP_H_ +#define _SOC_SANDYBRIDGE_IOMAP_H_ + +/* + * Memory-mapped I/O registers. + */ +#define MCFG_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS +#define MCFG_BASE_SIZE 0x4000000 + +/* Intel Enhanced Debug region must be 4MB */ + +#define IED_SIZE CONFIG_IED_REGION_SIZE + +#define ILB_BASE_ADDRESS 0xfed08000ULL +#define ILB_BASE_SIZE 0x400 + +#define DMI_BASE_ADDRESS 0xfed18000ULL +#define DMI_BASE_SIZE 0x1000 + +#define MCH_BASE_ADDRESS 0xfed10000ULL +#define MCH_BASE_SIZE 0x4000 + +#define EP_BASE_ADDRESS 0xfed19000ULL +#define EP_BASE_SIZE 0x1000 + +#define GFXVT_BASE_ADDRESS 0xfed90000ULL +#define GFXVT_BASE_SIZE 0x1000 + +#define VTVC0_BASE_ADDRESS 0xfed91000ULL +#define VTVC0_BASE_SIZE 0x1000 + +#define TPM_BASE_ADDRESS 0xfed40000ULL +#define TPM_BASE_SIZE 0x5000 + + +#endif diff --git a/src/northbridge/intel/sandybridge/northbridge.c b/src/northbridge/intel/sandybridge/northbridge.c index 5aa06c8..71dea62 100644 --- a/src/northbridge/intel/sandybridge/northbridge.c +++ b/src/northbridge/intel/sandybridge/northbridge.c @@ -112,8 +112,8 @@ /* Reserve IOMMU BARs */ const u32 capid0_a = pci_read_config32(dev, 0xe4); if (!(capid0_a & (1 << 23))) { - mmio_resource(dev, index++, IOMMU_BASE1 >> 10, 4); - mmio_resource(dev, index++, IOMMU_BASE2 >> 10, 4); + mmio_resource(dev, index++, GFXVT_BASE_ADDRESS / KiB, 4); + mmio_resource(dev, index++, VTVC0_BASE_ADDRESS / KiB, 4); } } diff --git a/src/northbridge/intel/sandybridge/raminit_common.c b/src/northbridge/intel/sandybridge/raminit_common.c index 55df03b..72ae5b0 100644 --- a/src/northbridge/intel/sandybridge/raminit_common.c +++ b/src/northbridge/intel/sandybridge/raminit_common.c @@ -41,23 +41,23 @@ * Channel X = [0, 1] * Command queue index Y = [0, 1, 2, 3] * - * DEFAULT_MCHBAR + 0x4220 + 0x400 * X + 4 * Y: command io register + * MCH_BASE_ADDRESS + 0x4220 + 0x400 * X + 4 * Y: command io register * Controls the DRAM command signals * Bit 0: !RAS * Bit 1: !CAS * Bit 2: !WE * - * DEFAULT_MCHBAR + 0x4200 + 0x400 * X + 4 * Y: addr bankslot io register + * MCH_BASE_ADDRESS + 0x4200 + 0x400 * X + 4 * Y: addr bankslot io register * Controls the address, bank address and slotrank signals * Bit 0-15 : Address * Bit 20-22: Bank Address * Bit 24-25: slotrank * - * DEFAULT_MCHBAR + 0x4230 + 0x400 * X + 4 * Y: idle register + * MCH_BASE_ADDRESS + 0x4230 + 0x400 * X + 4 * Y: idle register * Controls the idle time after issuing this DRAM command * Bit 16-32: number of clock-cylces to idle * - * DEFAULT_MCHBAR + 0x4284 + 0x400 * channel: execute command queue + * MCH_BASE_ADDRESS + 0x4284 + 0x400 * channel: execute command queue * Starts to execute all queued commands * Bit 0 : start DRAM command execution * Bit 18-19 : number of queued commands - 1 diff --git a/src/northbridge/intel/sandybridge/raminit_mrc.c b/src/northbridge/intel/sandybridge/raminit_mrc.c index c544a74..2382084 100644 --- a/src/northbridge/intel/sandybridge/raminit_mrc.c +++ b/src/northbridge/intel/sandybridge/raminit_mrc.c @@ -277,10 +277,10 @@ static void northbridge_fill_pei_data(struct pei_data *pei_data) { - pei_data->mchbar = (uintptr_t)DEFAULT_MCHBAR; - pei_data->dmibar = (uintptr_t)DEFAULT_DMIBAR; - pei_data->epbar = DEFAULT_EPBAR; - pei_data->pciexbar = CONFIG_MMCONF_BASE_ADDRESS; + pei_data->mchbar = MCH_BASE_ADDRESS; + pei_data->dmibar = DMI_BASE_ADDRESS; + pei_data->epbar = EP_BASE_ADDRESS; + pei_data->pciexbar = MCFG_BASE_ADDRESS; pei_data->smbusbar = SMBUS_IO_BASE; pei_data->wdbbar = 0x4000000; pei_data->wdbsize = 0x1000; diff --git a/src/northbridge/intel/sandybridge/sandybridge.h b/src/northbridge/intel/sandybridge/sandybridge.h index d7de843..dc9f889 100644 --- a/src/northbridge/intel/sandybridge/sandybridge.h +++ b/src/northbridge/intel/sandybridge/sandybridge.h @@ -17,6 +17,8 @@ #ifndef __NORTHBRIDGE_INTEL_SANDYBRIDGE_SANDYBRIDGE_H__ #define __NORTHBRIDGE_INTEL_SANDYBRIDGE_SANDYBRIDGE_H__ +#include <northbridge/intel/sandybridge/include/soc/iomap.h> + /* Device ID for SandyBridge and IvyBridge */ #define BASE_REV_SNB 0x00 #define BASE_REV_IVB 0x50 @@ -34,24 +36,6 @@ #define IVB_STEP_K0 (BASE_REV_IVB + 5) #define IVB_STEP_D0 (BASE_REV_IVB + 6) -/* Intel Enhanced Debug region must be 4MB */ - -#define IED_SIZE CONFIG_IED_REGION_SIZE - -/* Northbridge BARs */ -#ifndef __ACPI__ -#define DEFAULT_MCHBAR ((u8 *)0xfed10000) /* 16 KB */ -#define DEFAULT_DMIBAR ((u8 *)0xfed18000) /* 4 KB */ -#else -#define DEFAULT_MCHBAR 0xfed10000 /* 16 KB */ -#define DEFAULT_DMIBAR 0xfed18000 /* 4 KB */ -#endif -#define DEFAULT_EPBAR 0xfed19000 /* 4 KB */ -#define DEFAULT_RCBABASE ((u8 *)0xfed1c000) - -#define IOMMU_BASE1 0xfed90000ULL -#define IOMMU_BASE2 0xfed91000ULL - /* Everything below this line is ignored in the DSDT */ #ifndef __ACPI__ #include <cpu/intel/model_206ax/model_206ax.h> @@ -118,9 +102,9 @@ * MCHBAR */ -#define MCHBAR8(x) (*((volatile u8 *)(DEFAULT_MCHBAR + (x)))) -#define MCHBAR16(x) (*((volatile u16 *)(DEFAULT_MCHBAR + (x)))) -#define MCHBAR32(x) (*((volatile u32 *)(DEFAULT_MCHBAR + (x)))) +#define MCHBAR8(x) (*((volatile u8 *)((uintptr_t)MCH_BASE_ADDRESS + (x)))) +#define MCHBAR16(x) (*((volatile u16 *)((uintptr_t)MCH_BASE_ADDRESS + (x)))) +#define MCHBAR32(x) (*((volatile u32 *)((uintptr_t)MCH_BASE_ADDRESS + (x)))) #define MCHBAR32_OR(x, or) (MCHBAR32(x) = (MCHBAR32(x) | (or))) #define MCHBAR32_AND(x, and) (MCHBAR32(x) = (MCHBAR32(x) & (and))) #define MCHBAR32_AND_OR(x, and, or) \ @@ -133,9 +117,9 @@ * EPBAR - Egress Port Root Complex Register Block */ -#define EPBAR8(x) (*((volatile u8 *)(DEFAULT_EPBAR + (x)))) -#define EPBAR16(x) (*((volatile u16 *)(DEFAULT_EPBAR + (x)))) -#define EPBAR32(x) (*((volatile u32 *)(DEFAULT_EPBAR + (x)))) +#define EPBAR8(x) (*((volatile u8 *)((uintptr_t)EP_BASE_ADDRESS + (x)))) +#define EPBAR16(x) (*((volatile u16 *)((uintptr_t)EP_BASE_ADDRESS + (x)))) +#define EPBAR32(x) (*((volatile u32 *)((uintptr_t)EP_BASE_ADDRESS + (x)))) #define EPPVCCAP1 0x004 /* 32bit */ #define EPPVCCAP2 0x008 /* 32bit */ @@ -164,9 +148,9 @@ * DMIBAR */ -#define DMIBAR8(x) (*((volatile u8 *)(DEFAULT_DMIBAR + (x)))) -#define DMIBAR16(x) (*((volatile u16 *)(DEFAULT_DMIBAR + (x)))) -#define DMIBAR32(x) (*((volatile u32 *)(DEFAULT_DMIBAR + (x)))) +#define DMIBAR8(x) (*((volatile u8 *)((uintptr_t)DMI_BASE_ADDRESS + (x)))) +#define DMIBAR16(x) (*((volatile u16 *)((uintptr_t)DMI_BASE_ADDRESS + (x)))) +#define DMIBAR32(x) (*((volatile u32 *)((uintptr_t)DMI_BASE_ADDRESS + (x)))) #define DMIVCECH 0x000 /* 32bit */ #define DMIPVCCAP1 0x004 /* 32bit */ -- To view, visit https://review.coreboot.org/c/coreboot/+/32075 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I93aa0e78ff52e46256debd26601600a96404509f Gerrit-Change-Number: 32075 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

6 9

Change in ...coreboot[master]: [WIP]x86: Introduce the blobolator
by Patrick Rudolph (Code Review) Aug. 7, 2023

Aug. 7, 2023

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32020 Change subject: [WIP]x86: Introduce the blobolator ...................................................................... [WIP]x86: Introduce the blobolator This is a PoC to run arbitrary code and blobs inside an emulated virtual machine using libx86emu, thus the name blobolator. The libx86emu has been patched to the following: * redirect IO to the host machine it's running on * trace IO * start in protected mode * add mechanism to drop IO access * add Kconfig to debug code it is running Implemented features: * Run ramstage in libx86emu * Run postcar in libx86emu TODO: * Add support to trace only blobs, not stages. * Improve translation of known IO to human readable format ** COM ** PCI ** APIC ** PIT ** POST Tested on qemu. Sucessfully run ramstage in blobolator. Change-Id: I13e47f45e69376d046f35c04363fe3db1cfaa610 Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M src/Kconfig M src/arch/x86/boot.c M src/mainboard/emulation/qemu-i440fx/romstage.c M src/mainboard/emulation/qemu-q35/romstage.c M src/vendorcode/Makefile.inc A src/vendorcode/libx86emu/Makefile.inc A src/vendorcode/libx86emu/blobolator.c A src/vendorcode/libx86emu/decode.c A src/vendorcode/libx86emu/include/decode.h A src/vendorcode/libx86emu/include/mem.h A src/vendorcode/libx86emu/include/ops.h A src/vendorcode/libx86emu/include/prim_ops.h A src/vendorcode/libx86emu/include/x86emu.h A src/vendorcode/libx86emu/include/x86emu_int.h A src/vendorcode/libx86emu/mem.c A src/vendorcode/libx86emu/ops.c A src/vendorcode/libx86emu/ops2.c A src/vendorcode/libx86emu/prim_ops.c 18 files changed, 14,512 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/20/32020/1 -- To view, visit https://review.coreboot.org/c/coreboot/+/32020 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I13e47f45e69376d046f35c04363fe3db1cfaa610 Gerrit-Change-Number: 32020 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

10 31

Change in ...coreboot[master]: WIP: google/krane: Add Panel TV101WUM-NL6 support.
by Kaka Ni (Code Review) Aug. 7, 2023

Aug. 7, 2023

Kaka Ni has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32512 Change subject: WIP: google/krane: Add Panel TV101WUM-NL6 support. ...................................................................... WIP: google/krane: Add Panel TV101WUM-NL6 support. Add panel TV101WUM-NL6 for Krane. The edid info and init command are from: https://crrev.com/c/1565758 Change-Id: Ieb6b2be6c2c571c09c781f4370d8c52612421823 Signed-off-by: Kaka Ni <nigang(a)huaqin.corp-partner.google.com> --- M src/mainboard/google/kukui/Makefile.inc M src/mainboard/google/kukui/display.c M src/mainboard/google/kukui/display.h A src/mainboard/google/kukui/panel_krane.c 4 files changed, 423 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/12/32512/1 diff --git a/src/mainboard/google/kukui/Makefile.inc b/src/mainboard/google/kukui/Makefile.inc index ef52031..9576b7d 100644 --- a/src/mainboard/google/kukui/Makefile.inc +++ b/src/mainboard/google/kukui/Makefile.inc @@ -24,6 +24,7 @@ ramstage-y += chromeos.c ramstage-y += display.c ramstage-y += panel_kukui.c +ramstage-y += panel_krane.c ramstage-y += mainboard.c ramstage-y += memlayout.ld ramstage-y += reset.c diff --git a/src/mainboard/google/kukui/display.c b/src/mainboard/google/kukui/display.c index 5ec6ccd..b0a5026 100644 --- a/src/mainboard/google/kukui/display.c +++ b/src/mainboard/google/kukui/display.c @@ -97,6 +97,8 @@ { if (CONFIG(BOARD_GOOGLE_KUKUI)) return &kukui_display_intf; + else if (CONFIG(BOARD_GOOGLE_KRANE)) + return &krane_display_intf; else return NULL; } diff --git a/src/mainboard/google/kukui/display.h b/src/mainboard/google/kukui/display.h index 33cc997..52420db 100644 --- a/src/mainboard/google/kukui/display.h +++ b/src/mainboard/google/kukui/display.h @@ -33,9 +33,18 @@ PANEL_KUKUI_UNINITIALIZED }; +enum krane_panel_id { + PANEL_KRANE_FIRST = 0, + PANEL_KRANE_BOE_TV101WUM_NL6, + PANEL_KRANE_UNKNOWN, + PANEL_KRANE_COUNT, + PANEL_KRANE_UNINITIALIZED +}; + union panel_id { enum kukui_panel_id kukui_panel; + enum krane_panel_id krane_panel; int value; }; @@ -90,6 +99,7 @@ * Panel Interface for boards */ extern struct board_display_intf kukui_display_intf; +extern struct board_display_intf krane_display_intf; #endif diff --git a/src/mainboard/google/kukui/panel_krane.c b/src/mainboard/google/kukui/panel_krane.c new file mode 100644 index 0000000..5c338c8 --- /dev/null +++ b/src/mainboard/google/kukui/panel_krane.c @@ -0,0 +1,410 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2019 Huaqin Telecom Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <console/console.h> +#include <delay.h> +#include <device/device.h> +#include <edid.h> +#include <gpio.h> +#include <soc/auxadc.h> +#include <soc/ddp.h> +#include <soc/dsi.h> +#include <soc/gpio.h> +#include <boardid.h> + +#include "display.h" +#include "gpio.h" + +static struct edid krane_boe_tv101wum_nl6_edid = { + .panel_bits_per_color = 8, + .panel_bits_per_pixel = 24, + .mode = { + .name = "1200x1920@60Hz", + .pixel_clock = 159420, + .lvds_dual_channel = 0, + .refresh = 60, + .ha = 1200, .hbl = 164, .hso = 80, .hspw = 24, .hborder = 0, + .va = 1920, .vbl = 28, .vso = 10, .vspw = 4, .vborder = 0, + .phsync = '-', .pvsync = '-', + .x_mm = 135, .y_mm = 216, + }, +}; + +struct lcm_init_table boe_tv101wum_nl6_init_cmd[] = { + {INIT_DCS_CMD, 1, { 0x10 } }, + {DELAY_CMD, 34, {} }, + {INIT_DCS_CMD, 2, { 0xB0, 0x05 } }, + {INIT_DCS_CMD, 2, { 0xB1, 0xE5 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x52 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x88 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB6, 0x03 } }, + {INIT_DCS_CMD, 2, { 0xBA, 0x8B } }, + {INIT_DCS_CMD, 2, { 0xBF, 0x1A } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x0F } }, + {INIT_DCS_CMD, 2, { 0xC2, 0x0C } }, + {INIT_DCS_CMD, 2, { 0xC3, 0x02 } }, + {INIT_DCS_CMD, 2, { 0xC4, 0x0C } }, + {INIT_DCS_CMD, 2, { 0xC5, 0x02 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x01 } }, + {INIT_DCS_CMD, 2, { 0xE0, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xE1, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xDC, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xDD, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xCD, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xC8, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xD2, 0x03 } }, + {INIT_DCS_CMD, 2, { 0xD3, 0x03 } }, + {INIT_DCS_CMD, 2, { 0xE6, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xE7, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xC4, 0x09 } }, + {INIT_DCS_CMD, 2, { 0xC5, 0x09 } }, + {INIT_DCS_CMD, 2, { 0xD8, 0x0A } }, + {INIT_DCS_CMD, 2, { 0xD9, 0x0A } }, + {INIT_DCS_CMD, 2, { 0xC2, 0x0B } }, + {INIT_DCS_CMD, 2, { 0xC3, 0x0B } }, + {INIT_DCS_CMD, 2, { 0xD6, 0x0C } }, + {INIT_DCS_CMD, 2, { 0xD7, 0x0C } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x05 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x05 } }, + {INIT_DCS_CMD, 2, { 0xD4, 0x06 } }, + {INIT_DCS_CMD, 2, { 0xD5, 0x06 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x07 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x07 } }, + {INIT_DCS_CMD, 2, { 0xDE, 0x08 } }, + {INIT_DCS_CMD, 2, { 0xDF, 0x08 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x02 } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x0D } }, + {INIT_DCS_CMD, 2, { 0xC2, 0x17 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xC4, 0x31 } }, + {INIT_DCS_CMD, 2, { 0xC5, 0x1C } }, + {INIT_DCS_CMD, 2, { 0xC6, 0x2C } }, + {INIT_DCS_CMD, 2, { 0xC7, 0x33 } }, + {INIT_DCS_CMD, 2, { 0xC8, 0x31 } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x37 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x37 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x37 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0x39 } }, + {INIT_DCS_CMD, 2, { 0xCD, 0x2E } }, + {INIT_DCS_CMD, 2, { 0xCE, 0x2F } }, + {INIT_DCS_CMD, 2, { 0xCF, 0x2F } }, + {INIT_DCS_CMD, 2, { 0xD0, 0x07 } }, + {INIT_DCS_CMD, 2, { 0xD2, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xD3, 0x0D } }, + {INIT_DCS_CMD, 2, { 0xD4, 0x17 } }, + {INIT_DCS_CMD, 2, { 0xD5, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xD6, 0x31 } }, + {INIT_DCS_CMD, 2, { 0xD7, 0x3F } }, + {INIT_DCS_CMD, 2, { 0xD8, 0x3F } }, + {INIT_DCS_CMD, 2, { 0xD9, 0x3F } }, + {INIT_DCS_CMD, 2, { 0xDA, 0x3F } }, + {INIT_DCS_CMD, 2, { 0xDB, 0x37 } }, + {INIT_DCS_CMD, 2, { 0xDC, 0x37 } }, + {INIT_DCS_CMD, 2, { 0xDD, 0x37 } }, + {INIT_DCS_CMD, 2, { 0xDE, 0x39 } }, + {INIT_DCS_CMD, 2, { 0xDF, 0x2E } }, + {INIT_DCS_CMD, 2, { 0xE0, 0x2F } }, + {INIT_DCS_CMD, 2, { 0xE1, 0x2F } }, + {INIT_DCS_CMD, 2, { 0xE2, 0x07 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x03 } }, + {INIT_DCS_CMD, 2, { 0xC8, 0x0B } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x07 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xE7, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xC5, 0x2A } }, + {INIT_DCS_CMD, 2, { 0xDE, 0x2A } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x43 } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x07 } }, + {INIT_DCS_CMD, 2, { 0xE4, 0xC0 } }, + {INIT_DCS_CMD, 2, { 0xE5, 0x0D } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x06 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0xA5 } }, + {INIT_DCS_CMD, 2, { 0xC0, 0xA5 } }, + {INIT_DCS_CMD, 2, { 0xC7, 0x0F } }, + {INIT_DCS_CMD, 2, { 0xD5, 0x32 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xBC, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x07 } }, + {INIT_DCS_CMD, 2, { 0xB1, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB2, 0x02 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x0F } }, + {INIT_DCS_CMD, 2, { 0xB4, 0x25 } }, + {INIT_DCS_CMD, 2, { 0xB5, 0x39 } }, + {INIT_DCS_CMD, 2, { 0xB6, 0x4E } }, + {INIT_DCS_CMD, 2, { 0xB7, 0x72 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x97 } }, + {INIT_DCS_CMD, 2, { 0xB9, 0xDC } }, + {INIT_DCS_CMD, 2, { 0xBA, 0x22 } }, + {INIT_DCS_CMD, 2, { 0xBB, 0xA4 } }, + {INIT_DCS_CMD, 2, { 0xBC, 0x2B } }, + {INIT_DCS_CMD, 2, { 0xBD, 0x2F } }, + {INIT_DCS_CMD, 2, { 0xBE, 0xA9 } }, + {INIT_DCS_CMD, 2, { 0xBF, 0x25 } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x61 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x97 } }, + {INIT_DCS_CMD, 2, { 0xC2, 0xB2 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0xCD } }, + {INIT_DCS_CMD, 2, { 0xC4, 0xD9 } }, + {INIT_DCS_CMD, 2, { 0xC5, 0xE7 } }, + {INIT_DCS_CMD, 2, { 0xC6, 0xF4 } }, + {INIT_DCS_CMD, 2, { 0xC7, 0xFA } }, + {INIT_DCS_CMD, 2, { 0xC8, 0xFC } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0xAF } }, + {INIT_DCS_CMD, 2, { 0xCD, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xCE, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x08 } }, + {INIT_DCS_CMD, 2, { 0xB1, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xB2, 0x05 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x11 } }, + {INIT_DCS_CMD, 2, { 0xB4, 0x24 } }, + {INIT_DCS_CMD, 2, { 0xB5, 0x39 } }, + {INIT_DCS_CMD, 2, { 0xB6, 0x4F } }, + {INIT_DCS_CMD, 2, { 0xB7, 0x72 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x98 } }, + {INIT_DCS_CMD, 2, { 0xB9, 0xDC } }, + {INIT_DCS_CMD, 2, { 0xBA, 0x23 } }, + {INIT_DCS_CMD, 2, { 0xBB, 0xA6 } }, + {INIT_DCS_CMD, 2, { 0xBC, 0x2C } }, + {INIT_DCS_CMD, 2, { 0xBD, 0x30 } }, + {INIT_DCS_CMD, 2, { 0xBE, 0xAA } }, + {INIT_DCS_CMD, 2, { 0xBF, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x62 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x9B } }, + {INIT_DCS_CMD, 2, { 0xC2, 0xB5 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0xCF } }, + {INIT_DCS_CMD, 2, { 0xC4, 0xDB } }, + {INIT_DCS_CMD, 2, { 0xC5, 0xE8 } }, + {INIT_DCS_CMD, 2, { 0xC6, 0xF5 } }, + {INIT_DCS_CMD, 2, { 0xC7, 0xFA } }, + {INIT_DCS_CMD, 2, { 0xC8, 0xFC } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0xAF } }, + {INIT_DCS_CMD, 2, { 0xCD, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xCE, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x09 } }, + {INIT_DCS_CMD, 2, { 0xB1, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xB2, 0x02 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xB4, 0x24 } }, + {INIT_DCS_CMD, 2, { 0xB5, 0x3B } }, + {INIT_DCS_CMD, 2, { 0xB6, 0x4F } }, + {INIT_DCS_CMD, 2, { 0xB7, 0x73 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x99 } }, + {INIT_DCS_CMD, 2, { 0xB9, 0xE0 } }, + {INIT_DCS_CMD, 2, { 0xBA, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xBB, 0xAD } }, + {INIT_DCS_CMD, 2, { 0xBC, 0x36 } }, + {INIT_DCS_CMD, 2, { 0xBD, 0x3A } }, + {INIT_DCS_CMD, 2, { 0xBE, 0xAE } }, + {INIT_DCS_CMD, 2, { 0xBF, 0x2A } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x66 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x9E } }, + {INIT_DCS_CMD, 2, { 0xC2, 0xB8 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0xD1 } }, + {INIT_DCS_CMD, 2, { 0xC4, 0xDD } }, + {INIT_DCS_CMD, 2, { 0xC5, 0xE9 } }, + {INIT_DCS_CMD, 2, { 0xC6, 0xF6 } }, + {INIT_DCS_CMD, 2, { 0xC7, 0xFA } }, + {INIT_DCS_CMD, 2, { 0xC8, 0xFC } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0xAF } }, + {INIT_DCS_CMD, 2, { 0xCD, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xCE, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x0A } }, + {INIT_DCS_CMD, 2, { 0xB1, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB2, 0x02 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x0F } }, + {INIT_DCS_CMD, 2, { 0xB4, 0x25 } }, + {INIT_DCS_CMD, 2, { 0xB5, 0x39 } }, + {INIT_DCS_CMD, 2, { 0xB6, 0x4E } }, + {INIT_DCS_CMD, 2, { 0xB7, 0x72 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x97 } }, + {INIT_DCS_CMD, 2, { 0xB9, 0xDC } }, + {INIT_DCS_CMD, 2, { 0xBA, 0x22 } }, + {INIT_DCS_CMD, 2, { 0xBB, 0xA4 } }, + {INIT_DCS_CMD, 2, { 0xBC, 0x2B } }, + {INIT_DCS_CMD, 2, { 0xBD, 0x2F } }, + {INIT_DCS_CMD, 2, { 0xBE, 0xA9 } }, + {INIT_DCS_CMD, 2, { 0xBF, 0x25 } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x61 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x97 } }, + {INIT_DCS_CMD, 2, { 0xC2, 0xB2 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0xCD } }, + {INIT_DCS_CMD, 2, { 0xC4, 0xD9 } }, + {INIT_DCS_CMD, 2, { 0xC5, 0xE7 } }, + {INIT_DCS_CMD, 2, { 0xC6, 0xF4 } }, + {INIT_DCS_CMD, 2, { 0xC7, 0xFA } }, + {INIT_DCS_CMD, 2, { 0xC8, 0xFC } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0xAF } }, + {INIT_DCS_CMD, 2, { 0xCD, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xCE, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x0B } }, + {INIT_DCS_CMD, 2, { 0xB1, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xB2, 0x05 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x11 } }, + {INIT_DCS_CMD, 2, { 0xB4, 0x24 } }, + {INIT_DCS_CMD, 2, { 0xB5, 0x39 } }, + {INIT_DCS_CMD, 2, { 0xB6, 0x4F } }, + {INIT_DCS_CMD, 2, { 0xB7, 0x72 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x98 } }, + {INIT_DCS_CMD, 2, { 0xB9, 0xDC } }, + {INIT_DCS_CMD, 2, { 0xBA, 0x23 } }, + {INIT_DCS_CMD, 2, { 0xBB, 0xA6 } }, + {INIT_DCS_CMD, 2, { 0xBC, 0x2C } }, + {INIT_DCS_CMD, 2, { 0xBD, 0x30 } }, + {INIT_DCS_CMD, 2, { 0xBE, 0xAA } }, + {INIT_DCS_CMD, 2, { 0xBF, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x62 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x9B } }, + {INIT_DCS_CMD, 2, { 0xC2, 0xB5 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0xCF } }, + {INIT_DCS_CMD, 2, { 0xC4, 0xDB } }, + {INIT_DCS_CMD, 2, { 0xC5, 0xE8 } }, + {INIT_DCS_CMD, 2, { 0xC6, 0xF5 } }, + {INIT_DCS_CMD, 2, { 0xC7, 0xFA } }, + {INIT_DCS_CMD, 2, { 0xC8, 0xFC } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0xAF } }, + {INIT_DCS_CMD, 2, { 0xCD, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xCE, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x0C } }, + {INIT_DCS_CMD, 2, { 0xB1, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xB2, 0x02 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xB4, 0x24 } }, + {INIT_DCS_CMD, 2, { 0xB5, 0x3B } }, + {INIT_DCS_CMD, 2, { 0xB6, 0x4F } }, + {INIT_DCS_CMD, 2, { 0xB7, 0x73 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x99 } }, + {INIT_DCS_CMD, 2, { 0xB9, 0xE0 } }, + {INIT_DCS_CMD, 2, { 0xBA, 0x26 } }, + {INIT_DCS_CMD, 2, { 0xBB, 0xAD } }, + {INIT_DCS_CMD, 2, { 0xBC, 0x36 } }, + {INIT_DCS_CMD, 2, { 0xBD, 0x3A } }, + {INIT_DCS_CMD, 2, { 0xBE, 0xAE } }, + {INIT_DCS_CMD, 2, { 0xBF, 0x2A } }, + {INIT_DCS_CMD, 2, { 0xC0, 0x66 } }, + {INIT_DCS_CMD, 2, { 0xC1, 0x9E } }, + {INIT_DCS_CMD, 2, { 0xC2, 0xB8 } }, + {INIT_DCS_CMD, 2, { 0xC3, 0xD1 } }, + {INIT_DCS_CMD, 2, { 0xC4, 0xDD } }, + {INIT_DCS_CMD, 2, { 0xC5, 0xE9 } }, + {INIT_DCS_CMD, 2, { 0xC6, 0xF6 } }, + {INIT_DCS_CMD, 2, { 0xC7, 0xFA } }, + {INIT_DCS_CMD, 2, { 0xC8, 0xFC } }, + {INIT_DCS_CMD, 2, { 0xC9, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCA, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xCB, 0x16 } }, + {INIT_DCS_CMD, 2, { 0xCC, 0xAF } }, + {INIT_DCS_CMD, 2, { 0xCD, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xCE, 0xFF } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x00 } }, + {INIT_DCS_CMD, 2, { 0xB3, 0x08 } }, + {INIT_DCS_CMD, 2, { 0xB0, 0x04 } }, + {INIT_DCS_CMD, 2, { 0xB8, 0x68 } }, + {DELAY_CMD, 10, {} }, + {INIT_DCS_CMD, 1, { 0x11 } }, + {DELAY_CMD, 120, {} }, + {INIT_DCS_CMD, 1, { 0x29 } }, + {DELAY_CMD, 20, {} }, + +}; + +struct panel_info krane_panel_info[] = { + PANEL(PANEL_KRANE_BOE_TV101WUM_NL6, + 74000, + krane_boe_tv101wum_nl6_edid, + boe_tv101wum_nl6_init_cmd), + {{PANEL_KRANE_UNKNOWN}, "PANEL_KRANE_UNKNOWN", + 0, NULL, NULL, 0}, +}; + + +static union panel_id krane_get_panel_id(struct board_display_intf *intf) +{ + + return (union panel_id)PANEL_KRANE_BOE_TV101WUM_NL6; +}; + +static bool krane_is_panel_id_valid(union panel_id id) +{ + if (id.value < PANEL_KRANE_UNKNOWN) + return true; + return false; +}; + +static int krane_backlight(struct board_display_intf *intf) +{ + configure_backlight(); + return 0; +}; + +static int krane_power(struct board_display_intf *intf) +{ + + if (board_id() < 2) { + /* board from p1 */ + gpio_output(GPIO(LCM_RST), 0); + udelay(100); + gpio_output(GPIO(LCM_RST), 1); + mdelay(20); + } else { + /* board from p2 */ + gpio_output(GPIO(LCM_RST), 0); + udelay(1500); + gpio_output(GPIO(SIM2_SRST), 1); + mdelay(5); + gpio_output(GPIO(PERIPHERAL_EN9), 1); + gpio_output(GPIO(MISC_BSI_CK_3), 1); + mdelay(100); + gpio_output(GPIO(LCM_RST), 1); + mdelay(10); + } + + return 0; + +}; + +struct board_display_intf krane_display_intf = { + .board = "krane", + .all_panel_info = krane_panel_info, + .all_panel_info_size = ARRAY_SIZE(krane_panel_info), + .cur_panel_info = NULL, + .get_panel_id = &krane_get_panel_id, + .is_panel_id_valid = &krane_is_panel_id_valid, + .backlight = &krane_backlight, + .power = &krane_power, +}; -- To view, visit https://review.coreboot.org/c/coreboot/+/32512 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ieb6b2be6c2c571c09c781f4370d8c52612421823 Gerrit-Change-Number: 32512 Gerrit-PatchSet: 1 Gerrit-Owner: Kaka Ni <nigang(a)huaqin.corp-partner.google.com> Gerrit-MessageType: newchange

6 15

Change in ...coreboot[master]: security/vboot: Add fmap measurements
by Philipp Deppenwiese (Code Review) Aug. 7, 2023

Aug. 7, 2023

Philipp Deppenwiese has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31597 Change subject: security/vboot: Add fmap measurements ...................................................................... security/vboot: Add fmap measurements * Hook into fmap location * Add static measurements for IFD to the CRTM Change-Id: If7e4972805fbc8d19ab55d1f5e506836791c7bf0 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki(a)gmail.com> --- M src/lib/fmap.c M src/security/vboot/vboot_crtm.c M src/security/vboot/vboot_crtm.h 3 files changed, 76 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/97/31597/1 diff --git a/src/lib/fmap.c b/src/lib/fmap.c index 9602134..ae0aaf8 100644 --- a/src/lib/fmap.c +++ b/src/lib/fmap.c @@ -20,6 +20,7 @@ #include <commonlib/fmap_serialized.h> #include <stddef.h> #include <string.h> +#include <security/vboot/vboot_crtm.h> #include "fmap_config.h" @@ -77,7 +78,12 @@ if (fmap_locate_area(name, &ar)) return -1; - return boot_device_ro_subregion(&ar, area); + int ret = boot_device_ro_subregion(&ar, area); + if (!ret) + if (vboot_measure_fmap_hook(area, name)) + return -1; + + return ret; } int fmap_locate_area_as_rdev_rw(const char *name, struct region_device *area) @@ -87,7 +93,12 @@ if (fmap_locate_area(name, &ar)) return -1; - return boot_device_rw_subregion(&ar, area); + int ret = boot_device_rw_subregion(&ar, area); + if (!ret) + if (vboot_measure_fmap_hook(area, name)) + return -1; + + return ret; } int fmap_locate_area(const char *name, struct region *ar) diff --git a/src/security/vboot/vboot_crtm.c b/src/security/vboot/vboot_crtm.c index 1914f20..a474fd0 100644 --- a/src/security/vboot/vboot_crtm.c +++ b/src/security/vboot/vboot_crtm.c @@ -18,6 +18,16 @@ #include <security/vboot/vboot_crtm.h> #include <security/vboot/misc.h> +const static char *fmap_runtime_data[] = { + "UNIFIED_MRC_CACHE", + "RW_MRC_CACHE", + "RW_ELOG", + "RW_VPD", + "RW_NVRAM", + "RECOVERY_MRC_CACHE", + "RW_VAR_MRC_CACHE", + "SMMSTORE"}; + uint32_t vboot_init_crtm(void) { struct prog bootblock = PROG_INIT(PROG_BOOTBLOCK, "bootblock"); @@ -88,6 +98,36 @@ } } + /* IFD measurements */ + struct region_device fmap; + if (fmap_locate_area_as_rdev("RO_VPD", &fmap) == 0) + if (tpm_measure_region(&fmap, TPM_CRTM_PCR, "Read-only VPD") != TPM_SUCCESS) + return VB2_ERROR_UNKNOWN; + + if (fmap_locate_area_as_rdev("GBB", &fmap) == 0) + if (tpm_measure_region(&fmap, TPM_CRTM_PCR, "Google Binary Blob") != TPM_SUCCESS) + return VB2_ERROR_UNKNOWN; + + if (fmap_locate_area_as_rdev("SI_DESC", &fmap) == 0) + if (tpm_measure_region(&fmap, TPM_CRTM_PCR, "Intel Flash Descriptor") != TPM_SUCCESS) + return VB2_ERROR_UNKNOWN; + + if (fmap_locate_area_as_rdev("SI_ME", &fmap) == 0) + if (tpm_measure_region(&fmap, TPM_RUNTIME_DATA_PCR, "Intel ME") != TPM_SUCCESS) + return VB2_ERROR_UNKNOWN; + + if (fmap_locate_area_as_rdev("SI_EC", &fmap) == 0) + if (tpm_measure_region(&fmap, TPM_RUNTIME_DATA_PCR, "EC firmware") != TPM_SUCCESS) + return VB2_ERROR_UNKNOWN; + + if (fmap_locate_area_as_rdev("SI_GBE", &fmap) == 0) + if (tpm_measure_region(&fmap, TPM_CRTM_PCR, "Intel GbE") != TPM_SUCCESS) + return VB2_ERROR_UNKNOWN; + + if (fmap_locate_area_as_rdev("SI_PDR", &fmap) == 0) + if (tpm_measure_region(&fmap, TPM_RUNTIME_DATA_PCR, "Platform Data") != TPM_SUCCESS) + return VB2_ERROR_UNKNOWN; + return VB2_SUCCESS; } @@ -142,3 +182,18 @@ return tpm_measure_region(&rdev, pcr_index, name); } + +uint32_t vboot_measure_fmap_hook(struct region_device *rdev, const char *name) +{ + int i; + + if (!vb2_logic_executed()) + return 0; + + for (i = 0; i < sizeof(fmap_runtime_data) / sizeof(fmap_runtime_data[0]); i++) { + if (!strncmp(fmap_runtime_data[i], name, sizeof(fmap_runtime_data[i]))) + return tpm_measure_region(rdev, TPM_RUNTIME_DATA_PCR, name); + } + + return 0; +} diff --git a/src/security/vboot/vboot_crtm.h b/src/security/vboot/vboot_crtm.h index d28e96e..259e486 100644 --- a/src/security/vboot/vboot_crtm.h +++ b/src/security/vboot/vboot_crtm.h @@ -54,8 +54,16 @@ */ uint32_t vboot_measure_cbfs_hook(struct cbfsf *fh, const char *name); +/* + * Measures fmap data via hook (fmap) + * rdev is the region device handle to measure + * return 0 if successful, else an error + */ +uint32_t vboot_measure_fmap_hook(struct region_device *rdev, const char *name); + #else #define vboot_measure_cbfs_hook(fh, name) 0 +#define vboot_measure_fmap_hook(rdev, name) 0 #endif #endif /* __VBOOT_VBOOT_CRTM_H__ */ -- To view, visit https://review.coreboot.org/c/coreboot/+/31597 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: If7e4972805fbc8d19ab55d1f5e506836791c7bf0 Gerrit-Change-Number: 31597 Gerrit-PatchSet: 1 Gerrit-Owner: Philipp Deppenwiese <zaolin.daisuki(a)gmail.com> Gerrit-MessageType: newchange

8 66

Change in ...coreboot[master]: [NOTFORMERGE] intel/d945gclf board fork attempt
by junaid (Code Review) Aug. 7, 2023

Aug. 7, 2023

junaid has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/30977 Change subject: [NOTFORMERGE] intel/d945gclf board fork attempt ...................................................................... [NOTFORMERGE] intel/d945gclf board fork attempt port coreboot for som4461. 1.make a folder advantech in mainboard . 2.change vendor name in Kconfig.name files accordingly. 3.copy folder intle/d945gclf in advantech folder. rename folder with som4461 4.In som4461/kconfig.name change board name to som4461 5.In som4461/kconfig , change existing superio to select SUPERIO_WINBOND_W83627DHG 6.In som4461/devicetree.cb change existing chip to chip superio/winbond/w83627dhg 7.Change gpio.c as per inteltool.log of som4461 8.Change romstage.c , include winbond.h and w83627dhg.h 9.make menuconfig, slect vendor--> advantech , model--> som4461, chipset-->donot include microcode, select coreinfo as payload 10. coreboot.Rom file made 11. when dump in 4461 board , nothing appeares on serial console. Change-Id: I7ea260021dc8033c58f134a5c60cdcae12b44d88 Signed-off-by: junaid <junaidimpex(a)gmail.com> --- A src/mainboard/advantech/Kconfig A src/mainboard/advantech/Kconfig.name A src/mainboard/advantech/som4461/Kconfig A src/mainboard/advantech/som4461/Kconfig.name A src/mainboard/advantech/som4461/Makefile.inc A src/mainboard/advantech/som4461/acpi/ec.asl A src/mainboard/advantech/som4461/acpi/ich7_pci_irqs.asl A src/mainboard/advantech/som4461/acpi/mainboard.asl A src/mainboard/advantech/som4461/acpi/platform.asl A src/mainboard/advantech/som4461/acpi/superio.asl A src/mainboard/advantech/som4461/acpi/thermal.asl A src/mainboard/advantech/som4461/acpi_tables.c A src/mainboard/advantech/som4461/board_info.txt A src/mainboard/advantech/som4461/cmos.default A src/mainboard/advantech/som4461/cmos.layout A src/mainboard/advantech/som4461/cstates.c A src/mainboard/advantech/som4461/data.vbt A src/mainboard/advantech/som4461/devicetree.cb A src/mainboard/advantech/som4461/dsdt.asl A src/mainboard/advantech/som4461/gpio.c A src/mainboard/advantech/som4461/hda_verb.c A src/mainboard/advantech/som4461/irq_tables.c A src/mainboard/advantech/som4461/mptable.c A src/mainboard/advantech/som4461/romstage.c 24 files changed, 1,209 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/77/30977/1 diff --git a/src/mainboard/advantech/Kconfig b/src/mainboard/advantech/Kconfig new file mode 100644 index 0000000..b464c1a --- /dev/null +++ b/src/mainboard/advantech/Kconfig @@ -0,0 +1,30 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2011 Advanced Micro Devices, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +if VENDOR_ADVANTECH + +choice + prompt "Mainboard model" + +source "src/mainboard/advantech/*/Kconfig.name" + +endchoice + +source "src/mainboard/advantech/*/Kconfig" + +config MAINBOARD_VENDOR + string + default "Advantech" + +endif # VENDOR_ADVANTECH diff --git a/src/mainboard/advantech/Kconfig.name b/src/mainboard/advantech/Kconfig.name new file mode 100644 index 0000000..8862ffc --- /dev/null +++ b/src/mainboard/advantech/Kconfig.name @@ -0,0 +1,2 @@ +config VENDOR_ADVANTECH + bool "Advantech" diff --git a/src/mainboard/advantech/som4461/Kconfig b/src/mainboard/advantech/som4461/Kconfig new file mode 100644 index 0000000..24dc984 --- /dev/null +++ b/src/mainboard/advantech/som4461/Kconfig @@ -0,0 +1,51 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +if BOARD_ADVANTECH_SOM4461 + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select CPU_INTEL_SOCKET_441 + select NORTHBRIDGE_INTEL_I945 + select NORTHBRIDGE_INTEL_SUBTYPE_I945GC + select SOUTHBRIDGE_INTEL_I82801GX + select SUPERIO_WINBOND_W83627DHG + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select HAVE_ACPI_TABLES + select HAVE_ACPI_RESUME + select BOARD_ROMSIZE_KB_512 + select CHANNEL_XOR_RANDOMIZATION + select MAINBOARD_HAS_NATIVE_VGA_INIT + select INTEL_GMA_HAVE_VBT + +config MAINBOARD_DIR + string + default advantech/som4461 + +config MAINBOARD_PART_NUMBER + string + default "SOM4461" + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 4 + +endif # BOARD_ADVANTECH_SOM4461 diff --git a/src/mainboard/advantech/som4461/Kconfig.name b/src/mainboard/advantech/som4461/Kconfig.name new file mode 100644 index 0000000..1ff7de8 --- /dev/null +++ b/src/mainboard/advantech/som4461/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_ADVANTECH_SOM4461 + bool "SOM4461" diff --git a/src/mainboard/advantech/som4461/Makefile.inc b/src/mainboard/advantech/som4461/Makefile.inc new file mode 100644 index 0000000..f3d7e76 --- /dev/null +++ b/src/mainboard/advantech/som4461/Makefile.inc @@ -0,0 +1,2 @@ +ramstage-y += cstates.c +romstage-y += gpio.c diff --git a/src/mainboard/advantech/som4461/acpi/ec.asl b/src/mainboard/advantech/som4461/acpi/ec.asl new file mode 100644 index 0000000..5362bb2 --- /dev/null +++ b/src/mainboard/advantech/som4461/acpi/ec.asl @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Device(EC0) +{ + Name (_HID, EISAID("PNP0C09")) + Name (_UID, 1) + + // _REG method requires that an operation region be defined. + OperationRegion (ERAM, EmbeddedControl, 0x00, 0xff) + Field (ERAM, ByteAcc, Lock, Preserve) + { + } + + Method (_CRS, 0, Serialized) + { + Name (ECMD, ResourceTemplate() + { + IO (Decode16, 0x62, 0x62, 0, 1) + IO (Decode16, 0x66, 0x66, 0, 1) + }) + + Return (ECMD) + } + + Method (_REG, 2) + { + // This method is needed by Windows XP/2000 + // for EC initialization before a driver + // is loaded + } + + Name (_GPE, 23) // GPI07 / GPE23 -> Runtime SCI + + // TODO EC Query methods + + // TODO Scope _SB devices for AC power, LID, Power button + +} diff --git a/src/mainboard/advantech/som4461/acpi/ich7_pci_irqs.asl b/src/mainboard/advantech/som4461/acpi/ich7_pci_irqs.asl new file mode 100644 index 0000000..0da7e70 --- /dev/null +++ b/src/mainboard/advantech/som4461/acpi/ich7_pci_irqs.asl @@ -0,0 +1,78 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* This is board specific information: IRQ routing for the + * 0:1e.0 PCI bridge of the ICH7 + */ + +If (PICM) { + Return (Package() { + Package() { 0x0000ffff, 0, 0, 21}, + Package() { 0x0000ffff, 1, 0, 22}, + Package() { 0x0000ffff, 2, 0, 23}, + Package() { 0x0000ffff, 3, 0, 20}, + + Package() { 0x0001ffff, 0, 0, 22}, + Package() { 0x0001ffff, 1, 0, 21}, + Package() { 0x0001ffff, 2, 0, 20}, + Package() { 0x0001ffff, 3, 0, 23}, + + Package() { 0x0002ffff, 0, 0, 18}, + Package() { 0x0002ffff, 1, 0, 19}, + Package() { 0x0002ffff, 2, 0, 17}, + Package() { 0x0002ffff, 3, 0, 16}, + + Package() { 0x0003ffff, 0, 0, 19}, + Package() { 0x0003ffff, 1, 0, 18}, + Package() { 0x0003ffff, 2, 0, 21}, + Package() { 0x0003ffff, 3, 0, 22}, + + Package() { 0x0005ffff, 0, 0, 17}, + Package() { 0x0005ffff, 1, 0, 20}, + Package() { 0x0005ffff, 2, 0, 22}, + Package() { 0x0005ffff, 3, 0, 21}, + + Package() { 0x0008ffff, 0, 0, 20}, + }) +} Else { + Return (Package() { + Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKF, 0}, + Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKG, 0}, + Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKH, 0}, + Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKE, 0}, + + Package() { 0x0001ffff, 0, \_SB.PCI0.LPCB.LNKG, 0}, + Package() { 0x0001ffff, 1, \_SB.PCI0.LPCB.LNKF, 0}, + Package() { 0x0001ffff, 2, \_SB.PCI0.LPCB.LNKE, 0}, + Package() { 0x0001ffff, 3, \_SB.PCI0.LPCB.LNKH, 0}, + + Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKC, 0}, + Package() { 0x0002ffff, 1, \_SB.PCI0.LPCB.LNKD, 0}, + Package() { 0x0002ffff, 2, \_SB.PCI0.LPCB.LNKB, 0}, + Package() { 0x0002ffff, 3, \_SB.PCI0.LPCB.LNKA, 0}, + + Package() { 0x0003ffff, 0, \_SB.PCI0.LPCB.LNKD, 0}, + Package() { 0x0003ffff, 1, \_SB.PCI0.LPCB.LNKC, 0}, + Package() { 0x0003ffff, 2, \_SB.PCI0.LPCB.LNKF, 0}, + Package() { 0x0003ffff, 3, \_SB.PCI0.LPCB.LNKG, 0}, + + Package() { 0x0005ffff, 0, \_SB.PCI0.LPCB.LNKB, 0}, + Package() { 0x0005ffff, 1, \_SB.PCI0.LPCB.LNKE, 0}, + Package() { 0x0005ffff, 2, \_SB.PCI0.LPCB.LNKG, 0}, + Package() { 0x0005ffff, 3, \_SB.PCI0.LPCB.LNKF, 0}, + + Package() { 0x0008ffff, 0, \_SB.PCI0.LPCB.LNKE, 0}, + }) +} diff --git a/src/mainboard/advantech/som4461/acpi/mainboard.asl b/src/mainboard/advantech/som4461/acpi/mainboard.asl new file mode 100644 index 0000000..0454c3f --- /dev/null +++ b/src/mainboard/advantech/som4461/acpi/mainboard.asl @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Device (SLPB) +{ + Name(_HID, EisaId("PNP0C0E")) + + // Wake + Name(_PRW, Package(){0x1d, 0x04}) +} + +Device (PWRB) +{ + Name(_HID, EisaId("PNP0C0C")) + + // Wake + Name(_PRW, Package(){0x1d, 0x04}) +} diff --git a/src/mainboard/advantech/som4461/acpi/platform.asl b/src/mainboard/advantech/som4461/acpi/platform.asl new file mode 100644 index 0000000..21eb3df --- /dev/null +++ b/src/mainboard/advantech/som4461/acpi/platform.asl @@ -0,0 +1,48 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ + // Call a trap so SMI can prepare for Sleep as well. + // TRAP(0x55) +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + // CPU specific part + + // Notify PCI Express slots in case a card + // was inserted while a sleep state was active. + + // Are we going to S3? + If (LEqual(Arg0, 3)) { + // .. + } + + // Are we going to S4? + If (LEqual(Arg0, 4)) { + // .. + } + + // TODO: Windows XP SP2 P-State restore + + Return(Package(){0,0}) +} diff --git a/src/mainboard/advantech/som4461/acpi/superio.asl b/src/mainboard/advantech/som4461/acpi/superio.asl new file mode 100644 index 0000000..152302e --- /dev/null +++ b/src/mainboard/advantech/som4461/acpi/superio.asl @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + +Device (SIO1) +{ + Name (_HID, EISAID("PNP0A05")) + Name (_UID, 1) + + Device (UAR1) + { + Name(_HID, EISAID("PNP0501")) + Name(_UID, 1) + + // Some methods need an implementation here: + // missing: _STA, _DIS, _CRS, _PRS, + // missing: _SRS, _PS0, _PS3 + } + + Device (UAR2) + { + Name(_HID, EISAID("PNP0501")) + Name(_UID, 2) + + // Some methods need an implementation here: + // missing: _STA, _DIS, _CRS, _PRS, + // missing: _SRS, _PS0, _PS3 + } +} diff --git a/src/mainboard/advantech/som4461/acpi/thermal.asl b/src/mainboard/advantech/som4461/acpi/thermal.asl new file mode 100644 index 0000000..27337d4 --- /dev/null +++ b/src/mainboard/advantech/som4461/acpi/thermal.asl @@ -0,0 +1,89 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +// Thermal Zone + +Scope (\_TZ) +{ + ThermalZone (THRM) + { + + // FIXME these could/should be read from the + // GNVS area, so they can be controlled by + // coreboot + Name(TC1V, 0x04) + Name(TC2V, 0x03) + Name(TSPV, 0x64) + + // At which temperature should the OS start + // active cooling? + Method (_AC0, 0, Serialized) + { + Return (0xf5c) // Value for Rocky + } + + // Method (_AC1, 0, Serialized) + // { + // Return (0xf5c) + // } + + // Critical shutdown temperature + Method (_CRT, 0, Serialized) + { + Return (Add (0x0aac, 0x50)) // FIXME + } + + // CPU throttling start temperature + Method (_PSV, 0, Serialized) + { + Return (0xaaf) // FIXME + } + + // Get DTS Temperature + Method (_TMP, 0, Serialized) + { + Return (0xaac) // FIXME + } + + // Processors used for active cooling + Method (_PSL, 0, Serialized) + { + If (MPEN) { + Return (Package() {\_PR.CP01, \_PR.CP02}) + } + Return (Package() {\_PR.CP01}) + } + + // TC1 value for passive cooling + Method (_TC1, 0, Serialized) + { + Return (TC1V) + } + + // TC2 value for passive cooling + Method (_TC2, 0, Serialized) + { + Return (TC2V) + } + + // Sampling period for passive cooling + Method (_TSP, 0, Serialized) + { + Return (TSPV) + } + + + } +} diff --git a/src/mainboard/advantech/som4461/acpi_tables.c b/src/mainboard/advantech/som4461/acpi_tables.c new file mode 100644 index 0000000..ba3995e --- /dev/null +++ b/src/mainboard/advantech/som4461/acpi_tables.c @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdint.h> +#include <southbridge/intel/i82801gx/nvs.h> + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ +} diff --git a/src/mainboard/advantech/som4461/board_info.txt b/src/mainboard/advantech/som4461/board_info.txt new file mode 100644 index 0000000..d2bead1 --- /dev/null +++ b/src/mainboard/advantech/som4461/board_info.txt @@ -0,0 +1,3 @@ +Category: mini +Board URL: http://www.http://origindownload.advantech.com/ProductFile/PIS/SOM-4461/Pro… +Release year: 2011 diff --git a/src/mainboard/advantech/som4461/cmos.default b/src/mainboard/advantech/som4461/cmos.default new file mode 100644 index 0000000..2cb37df --- /dev/null +++ b/src/mainboard/advantech/som4461/cmos.default @@ -0,0 +1,6 @@ +boot_option=Fallback +debug_level=Debug +hyper_threading=Enable +nmi=Enable +boot_devices='' +gfx_uma_size=8M diff --git a/src/mainboard/advantech/som4461/cmos.layout b/src/mainboard/advantech/som4461/cmos.layout new file mode 100644 index 0000000..bdc264b --- /dev/null +++ b/src/mainboard/advantech/som4461/cmos.layout @@ -0,0 +1,114 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2007-2008 coresystems GmbH +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +# ----------------------------------------------------------------- +entries + +# ----------------------------------------------------------------- +# Status Register A +# ----------------------------------------------------------------- +# Status Register B +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +388 4 h 0 reboot_counter +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +#392 3 r 0 unused +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail + +# coreboot config options: northbridge +411 3 e 11 gfx_uma_size + +# coreboot config options: bootloader +416 512 s 0 boot_devices +#928 80 r 0 unused + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# RAM initialization internal data +1024 8 r 0 C0WL0REOST +1032 8 r 0 C1WL0REOST +1040 8 r 0 RCVENMT +1048 4 r 0 C0DRT1 +1052 4 r 0 C1DRT1 + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +6 0 Emergency +6 1 Alert +6 2 Critical +6 3 Error +6 4 Warning +6 5 Notice +6 6 Info +6 7 Debug +6 8 Spew +7 0 Disable +7 1 Enable +7 2 Keep +11 0 1M +11 1 4M +11 2 8M +11 3 16M +11 4 32M +11 5 48M +11 6 64M + +# ----------------------------------------------------------------- +checksums + +checksum 392 983 984 diff --git a/src/mainboard/advantech/som4461/cstates.c b/src/mainboard/advantech/som4461/cstates.c new file mode 100644 index 0000000..f683756 --- /dev/null +++ b/src/mainboard/advantech/som4461/cstates.c @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/device.h> +#include <arch/x86/include/arch/acpigen.h> + +int get_cst_entries(acpi_cstate_t **entries) +{ + return 0; +} diff --git a/src/mainboard/advantech/som4461/data.vbt b/src/mainboard/advantech/som4461/data.vbt new file mode 100644 index 0000000..326eab7 --- /dev/null +++ b/src/mainboard/advantech/som4461/data.vbt Binary files differ diff --git a/src/mainboard/advantech/som4461/devicetree.cb b/src/mainboard/advantech/som4461/devicetree.cb new file mode 100644 index 0000000..864775a --- /dev/null +++ b/src/mainboard/advantech/som4461/devicetree.cb @@ -0,0 +1,106 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +chip northbridge/intel/i945 + + device cpu_cluster 0 on + chip cpu/intel/socket_441 + device lapic 0 on end + end + end + + register "pci_mmio_size" = "768" + + device domain 0 on + subsystemid 0x8086 0x464c inherit + device pci 00.0 on end # host bridge + device pci 01.0 off end # i945 PCIe root port + device pci 02.0 on end # vga controller + device pci 02.1 on end # display controller + + chip southbridge/intel/i82801gx + register "pirqa_routing" = "0x05" + register "pirqb_routing" = "0x07" + register "pirqc_routing" = "0x05" + register "pirqd_routing" = "0x07" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x06" + + # GPI routing + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) + register "gpi13_routing" = "1" + register "gpe0_en" = "0x20000601" + + register "ide_legacy_combined" = "0x0" + register "ide_enable_primary" = "0x1" + register "ide_enable_secondary" = "0x0" + register "sata_ahci" = "0x0" + register "c3_latency" = "85" + register "p_cnt_throttling_supported" = "0" + + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 on end # PCIe port 1 + device pci 1c.1 off end # PCIe port 2 + device pci 1c.2 on end # PCIe port 3 + device pci 1c.3 on end # PCIe port 4 + device pci 1c.4 off end # PCIe port 5 + device pci 1c.5 off end # PCIe port 6 + device pci 1d.0 on end # USB UHCI + device pci 1d.1 on end # USB UHCI + device pci 1d.2 on end # USB UHCI + device pci 1d.3 off end # USB UHCI + device pci 1d.7 on end # USB2 EHCI + device pci 1e.0 on end # PCI bridge + device pci 1e.2 off end # AC'97 Audio + device pci 1e.3 off end # AC'97 Modem + device pci 1f.0 on # LPC bridge + chip superio/winbond/w83627dhg + device pnp 2e.0 off end # Floppy + device pnp 2e.1 off end # Parallel Port + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard,Mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + #device pnp 2e.6 off end # SPI + device pnp 2e.307 off end # GPIO6 + device pnp 2e.8 off end # WDTO, PLED + device pnp 2e.009 off end # GPIO2 + device pnp 2e.109 off end # GPIO3 + device pnp 2e.209 off end # GPIO4 + device pnp 2e.309 off end # GPIO5 + device pnp 2e.A off end # ACPI + device pnp 2e.B off end # HW Monitor + end # w83627dhg + end + device pci 1f.1 off end # IDE + device pci 1f.2 on end # SATA + device pci 1f.3 on end # SMBus + end + end +end diff --git a/src/mainboard/advantech/som4461/dsdt.asl b/src/mainboard/advantech/som4461/dsdt.asl new file mode 100644 index 0000000..95ed8d9 --- /dev/null +++ b/src/mainboard/advantech/som4461/dsdt.asl @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/acpi.h> +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20090419 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + + // global NVS and variables + #include <southbridge/intel/i82801gx/acpi/globalnvs.asl> + #include <southbridge/intel/common/acpi/platform.asl> + + // General Purpose Events + //#include "acpi/gpe.asl" + + // mainboard specific devices + #include "acpi/mainboard.asl" + + // Thermal Zone + //#include "acpi/thermal.asl" + + #include <cpu/intel/speedstep/acpi/cpu.asl> + + Scope (\_SB) { + Device (PCI0) + { + #include <northbridge/intel/i945/acpi/i945.asl> + #include <southbridge/intel/i82801gx/acpi/ich7.asl> + } + } + + /* Chipset specific sleep states */ + #include <southbridge/intel/i82801gx/acpi/sleepstates.asl> +} diff --git a/src/mainboard/advantech/som4461/gpio.c b/src/mainboard/advantech/som4461/gpio.c new file mode 100644 index 0000000..cd5a1fc --- /dev/null +++ b/src/mainboard/advantech/som4461/gpio.c @@ -0,0 +1,127 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Arthur Heymans <arthur(a)aheymans.xyz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_GPIO, + .gpio10 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio19 = GPIO_MODE_GPIO, + .gpio21 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_GPIO, + .gpio26 = GPIO_MODE_GPIO, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_OUTPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_INPUT, + + .gpio12 = GPIO_DIR_INPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + + .gpio19 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + + .gpio23 = GPIO_DIR_OUTPUT, + + .gpio24 = GPIO_DIR_OUTPUT, + .gpio25 = GPIO_DIR_OUTPUT, + .gpio26 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_OUTPUT, + +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + + .gpio7 = GPIO_LEVEL_HIGH, + .gpio23 = GPIO_LEVEL_HIGH, + + .gpio24 = GPIO_LEVEL_HIGH, + .gpio25 = GPIO_LEVEL_HIGH, + + .gpio26 = GPIO_LEVEL_LOW, + .gpio27 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, + +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio13 = GPIO_INVERT, + .gpio15 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_OUTPUT, + .gpio35 = GPIO_DIR_OUTPUT, + + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio33 = GPIO_LEVEL_HIGH, + .gpio34 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, +}; diff --git a/src/mainboard/advantech/som4461/hda_verb.c b/src/mainboard/advantech/som4461/hda_verb.c new file mode 100644 index 0000000..5d08879 --- /dev/null +++ b/src/mainboard/advantech/som4461/hda_verb.c @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[0] = {}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/advantech/som4461/irq_tables.c b/src/mainboard/advantech/som4461/irq_tables.c new file mode 100644 index 0000000..1a7e85b --- /dev/null +++ b/src/mainboard/advantech/som4461/irq_tables.c @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*18, /* There can be total 18 devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x1f << 3)|0x0, /* Where the interrupt router lies (dev) */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x27b0, /* Device */ + 0, /* miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0xf, /* u8 checksum. */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x01 << 3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x0, 0x0}, // PCIe? + {0x00,(0x02 << 3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // VGA + {0x00,(0x1e << 3)|0x0, {{0x61, 0xdcf8}, {0x68, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // PCI bridge + {0x00,(0x1f << 3)|0x0, {{0x62, 0xdcf8}, {0x63, 0xdcd8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // LPC + {0x00,(0x1d << 3)|0x0, {{0x6b, 0xdcf8}, {0x63, 0xdcd8}, {0x62, 0xdcf8}, {0x60, 0x0dcf8}}, 0x0, 0x0}, // USB#1 + {0x00,(0x1b << 3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // Audio device + {0x00,(0x1c << 3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x2, 0x0}, // PCIe bridge + {0x04,(0x00 << 3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // Firewire + {0x04,(0x01 << 3)|0x0, {{0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0x0dcf8}}, 0x1, 0x0}, // PCI Bridge + {0x04,(0x02 << 3)|0x0, {{0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0x0dcf8}}, 0x2, 0x0}, + {0x04,(0x03 << 3)|0x0, {{0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0x0dcf8}}, 0x3, 0x0}, + {0x04,(0x04 << 3)|0x0, {{0x6b, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0x0dcf8}}, 0x4, 0x0}, + {0x04,(0x05 << 3)|0x0, {{0x63, 0xdcd8}, {0x62, 0xdcf8}, {0x61, 0xdcf8}, {0x60, 0x0dcf8}}, 0x5, 0x0}, + {0x04,(0x06 << 3)|0x0, {{0x62, 0xdcf8}, {0x61, 0xdcf8}, {0x60, 0xdcf8}, {0x63, 0x0dcd8}}, 0x6, 0x0}, + {0x04,(0x09 << 3)|0x0, {{0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0x0dcf8}}, 0x9, 0x0}, + {0x01,(0x00 << 3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x0, 0x0}, // Ethernet 8168 + {0x02,(0x00 << 3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x9, 0x0}, + {0x03,(0x00 << 3)|0x0, {{0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0xdcd8}, {0x60, 0x0dcf8}}, 0xa, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/advantech/som4461/mptable.c b/src/mainboard/advantech/som4461/mptable.c new file mode 100644 index 0000000..d9aa098 --- /dev/null +++ b/src/mainboard/advantech/som4461/mptable.c @@ -0,0 +1,85 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/device.h> +#include <device/pci.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include <string.h> +#include <stdint.h> + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int isa_bus; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + mptable_write_buses(mc, NULL, &isa_bus); + + /* I/O APICs: APIC ID Version State Address */ + smp_write_ioapic(mc, 2, 0x20, VIO_APIC_VADDR); + + /* Legacy Interrupts */ + + mptable_add_isa_interrupts(mc, isa_bus, 0x2, 0); + + /* Builtin devices on Bus 0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x8, 0x2, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x7d, 0x2, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x74, 0x2, 0x17); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x75, 0x2, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x76, 0x2, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x77, 0x2, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x6c, 0x2, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x70, 0x2, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x71, 0x2, 0x11); + + /* Firewire 4:0.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, 0x0, 0x2, 0x10); + + /* Old riser card */ + // riser slot top 5:8.0 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x20, 0x2, 0x14); + // riser slot middle 5:9.0 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x24, 0x2, 0x15); + // riser slot bottom 5:a.0 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x28, 0x2, 0x16); + + /* New Riser Card */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x30, 0x2, 0x14); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x34, 0x2, 0x15); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x38, 0x2, 0x16); + + /* Onboard Ethernet */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, 0x0, 0x2, 0x10); + + /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + mptable_lintsrc(mc, isa_bus); + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/advantech/som4461/romstage.c b/src/mainboard/advantech/som4461/romstage.c new file mode 100644 index 0000000..7671f9f --- /dev/null +++ b/src/mainboard/advantech/som4461/romstage.c @@ -0,0 +1,173 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +// __PRE_RAM__ means: use "unsigned" for device, not a struct. +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627dhg/w83627dhg.h> +#include <console/console.h> +#include <cpu/x86/bist.h> +#include <cpu/intel/romstage.h> +#include <northbridge/intel/i945/i945.h> +#include <northbridge/intel/i945/raminit.h> +#include <southbridge/intel/i82801gx/i82801gx.h> +#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1) +#define GPIO_DEV PNP_DEV(0x2e, W83627DHG_GPIO2345_V) +static void ich7_enable_lpc(void) +{ + // Enable Serial IRQ + pci_write_config8(PCI_DEV(0, 0x1f, 0), SERIRQ_CNTL, 0xd0); + // Set COM1/COM2 decode range + pci_write_config16(PCI_DEV(0, 0x1f, 0), LPC_IO_DEC, 0x0010); + // Enable COM1 + pci_write_config16(PCI_DEV(0, 0x1f, 0), LPC_EN, CNF1_LPC_EN | KBC_LPC_EN + | FDD_LPC_EN | LPT_LPC_EN | COMA_LPC_EN); + // Enable SuperIO Power Management Events + pci_write_config32(PCI_DEV(0, 0x1f, 0), GEN1_DEC, 0x007c0681); +} + +static void rcba_config(void) +{ + /* Set up virtual channel 0 */ + //RCBA32(0x0014) = 0x80000001; + //RCBA32(0x001c) = 0x03128010; + + /* dev irq route register */ + RCBA16(D31IR) = 0x0132; + RCBA16(D30IR) = 0x0146; + RCBA16(D29IR) = 0x0237; + RCBA16(D28IR) = 0x3201; + RCBA16(D27IR) = 0x0146; + + /* Enable IOAPIC */ + RCBA8(OIC) = 0x03; + + /* Disable unused devices */ + RCBA32(FD) |= FD_INTLAN; + + /* Enable PCIe Root Port Clock Gate */ + // RCBA32(0x341c) = 0x00000001; +} + +static void early_ich7_init(void) +{ + uint8_t reg8; + uint32_t reg32; + + // program secondary mlt XXX byte? + pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20); + + // reset rtc power status + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4); + reg8 &= ~(1 << 2); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8); + + // usb transient disconnect + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); + reg8 |= (3 << 0); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); + reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); + reg32 |= (1 << 29) | (1 << 17); + pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); + reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); + reg32 |= (1 << 31) | (1 << 27); + pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); + RCBA32(0x0088) = 0x0011d000; + RCBA16(0x01fc) = 0x060f; + RCBA32(0x01f4) = 0x86000040; + RCBA32(0x0214) = 0x10030549; + RCBA32(0x0218) = 0x00020504; + RCBA8(0x0220) = 0xc5; + reg32 = RCBA32(0x3410); + reg32 |= (1 << 6); + RCBA32(0x3410) = reg32; + reg32 = RCBA32(0x3430); + reg32 &= ~(3 << 0); + reg32 |= (1 << 0); + RCBA32(0x3430) = reg32; + RCBA16(0x0200) = 0x2008; + RCBA8(0x2027) = 0x0d; + RCBA16(0x3e08) |= (1 << 7); + RCBA16(0x3e48) |= (1 << 7); + RCBA32(0x3e0e) |= (1 << 7); + RCBA32(0x3e4e) |= (1 << 7); + + // next step only on ich7m b0 and later: + reg32 = RCBA32(0x2034); + reg32 &= ~(0x0f << 16); + reg32 |= (5 << 16); + RCBA32(0x2034) = reg32; +} + +void mainboard_romstage_entry(unsigned long bist) +{ + int s3resume = 0, boot_mode = 0; + + if (bist == 0) + enable_lapic(); + + ich7_enable_lpc(); + /* Enable SuperIO PM */ + //lpc47m15x_enable_serial(PME_DEV, 0x680); + + //lpc47m15x_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); /* 0x3f8 */ + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + /* Set up the console */ + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + if (MCHBAR16(SSKPD) == 0xCAFE) +{ + printk(BIOS_DEBUG, "soft reset detected.\n"); + boot_mode = 1; +} + + /* Perform some early chipset initialization required + * before RAM initialization can work + */ + i945_early_initialization(); + + s3resume = southbridge_detect_s3_resume(); + + /* Enable SPD ROMs and DDR-II DRAM */ + enable_smbus(); + +#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8 + dump_spd_registers(); +#endif + + sdram_initialize(s3resume ? 2 : boot_mode, NULL); + + /* Perform some initialization that must run before stage2 */ + early_ich7_init(); + + /* This should probably go away. Until now it is required + * and mainboard specific + */ + rcba_config(); + + /* Chipset Errata! */ + fixup_i945_errata(); + + /* Initialize the internal PCIe links before we go into stage2 */ + i945_late_initialization(s3resume); +} -- To view, visit https://review.coreboot.org/c/coreboot/+/30977 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I7ea260021dc8033c58f134a5c60cdcae12b44d88 Gerrit-Change-Number: 30977 Gerrit-PatchSet: 1 Gerrit-Owner: junaid <junaidimpex(a)gmail.com> Gerrit-MessageType: newchange

5 5