coreboot-gerrit

Download

coreboot-gerrit@coreboot.org

January 2017

1 participants
852 discussions

New patch to review for coreboot: Select a default SeaBIOS PS2 timeout in H8 Kconfig
by Arthur Heymans Jan. 31, 2017

Jan. 31, 2017

Arthur Heymans (arthur(a)aheymans.xyz) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/18274 -gerrit commit 708ab50dfc7e422e2076126d1a324a31db35876d Author: Arthur Heymans <arthur(a)aheymans.xyz> Date: Tue Jan 31 23:16:25 2017 +0100 Select a default SeaBIOS PS2 timeout in H8 Kconfig This timeout is probably needed on all devices with Lenovo H8 embedded controllers so set the default there. Change-Id: I830ab1894f7c0f10f55c82e398becf44d810852d Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- src/ec/lenovo/h8/Kconfig | 8 ++++++++ src/mainboard/lenovo/t400/Kconfig | 5 ----- src/mainboard/lenovo/t420/Kconfig | 5 ----- src/mainboard/lenovo/t420s/Kconfig | 5 ----- src/mainboard/lenovo/t520/Kconfig | 5 ----- src/mainboard/lenovo/t60/Kconfig | 5 ----- src/mainboard/lenovo/x200/Kconfig | 5 ----- src/mainboard/lenovo/x201/Kconfig | 5 ----- src/mainboard/lenovo/x220/Kconfig | 5 ----- src/mainboard/lenovo/x60/Kconfig | 5 ----- 10 files changed, 8 insertions(+), 45 deletions(-) diff --git a/src/ec/lenovo/h8/Kconfig b/src/ec/lenovo/h8/Kconfig index 6a9d055..1454ae7 100644 --- a/src/ec/lenovo/h8/Kconfig +++ b/src/ec/lenovo/h8/Kconfig @@ -4,3 +4,11 @@ config EC_LENOVO_H8 config H8_DOCK_EARLY_INIT bool +if EC_LENOVO_H8 + +config SEABIOS_PS2_TIMEOUT + int + depends on PAYLOAD_SEABIOS + default 3000 + +endif diff --git a/src/mainboard/lenovo/t400/Kconfig b/src/mainboard/lenovo/t400/Kconfig index f21f672..23c7d02 100644 --- a/src/mainboard/lenovo/t400/Kconfig +++ b/src/mainboard/lenovo/t400/Kconfig @@ -55,9 +55,4 @@ config ONBOARD_VGA_IS_PRIMARY bool default y -config SEABIOS_PS2_TIMEOUT - int - depends on PAYLOAD_SEABIOS - default 3000 - endif # BOARD_LENOVO_T400 diff --git a/src/mainboard/lenovo/t420/Kconfig b/src/mainboard/lenovo/t420/Kconfig index e2272b1..04233e7 100644 --- a/src/mainboard/lenovo/t420/Kconfig +++ b/src/mainboard/lenovo/t420/Kconfig @@ -76,9 +76,4 @@ config ONBOARD_VGA_IS_PRIMARY bool default y -config SEABIOS_PS2_TIMEOUT - int - depends on PAYLOAD_SEABIOS - default 3000 - endif # BOARD_LENOVO_T420 diff --git a/src/mainboard/lenovo/t420s/Kconfig b/src/mainboard/lenovo/t420s/Kconfig index d278ccb..feacb51 100644 --- a/src/mainboard/lenovo/t420s/Kconfig +++ b/src/mainboard/lenovo/t420s/Kconfig @@ -75,9 +75,4 @@ config ONBOARD_VGA_IS_PRIMARY bool default y -config SEABIOS_PS2_TIMEOUT - int - depends on PAYLOAD_SEABIOS - default 3000 - endif # BOARD_LENOVO_T420S diff --git a/src/mainboard/lenovo/t520/Kconfig b/src/mainboard/lenovo/t520/Kconfig index 4ce27f1..ee5dd81 100644 --- a/src/mainboard/lenovo/t520/Kconfig +++ b/src/mainboard/lenovo/t520/Kconfig @@ -75,9 +75,4 @@ config ONBOARD_VGA_IS_PRIMARY bool default y -config SEABIOS_PS2_TIMEOUT - int - depends on PAYLOAD_SEABIOS - default 3000 - endif # BOARD_LENOVO_T520 diff --git a/src/mainboard/lenovo/t60/Kconfig b/src/mainboard/lenovo/t60/Kconfig index 9fb46e2..289c06a 100644 --- a/src/mainboard/lenovo/t60/Kconfig +++ b/src/mainboard/lenovo/t60/Kconfig @@ -42,9 +42,4 @@ config MAX_CPUS int default 2 -config SEABIOS_PS2_TIMEOUT - int - depends on PAYLOAD_SEABIOS - default 3000 - endif diff --git a/src/mainboard/lenovo/x200/Kconfig b/src/mainboard/lenovo/x200/Kconfig index cec08f6..ff6139e 100644 --- a/src/mainboard/lenovo/x200/Kconfig +++ b/src/mainboard/lenovo/x200/Kconfig @@ -47,9 +47,4 @@ config CBFS_SIZE hex default 0x200000 -config SEABIOS_PS2_TIMEOUT - int - depends on PAYLOAD_SEABIOS - default 3000 - endif # BOARD_LENOVO_X200 diff --git a/src/mainboard/lenovo/x201/Kconfig b/src/mainboard/lenovo/x201/Kconfig index 0bf6135..239a815 100644 --- a/src/mainboard/lenovo/x201/Kconfig +++ b/src/mainboard/lenovo/x201/Kconfig @@ -48,9 +48,4 @@ config CPU_ADDR_BITS int default 36 -config SEABIOS_PS2_TIMEOUT - int - depends on PAYLOAD_SEABIOS - default 3000 - endif diff --git a/src/mainboard/lenovo/x220/Kconfig b/src/mainboard/lenovo/x220/Kconfig index 5367fd1..0ef6689 100644 --- a/src/mainboard/lenovo/x220/Kconfig +++ b/src/mainboard/lenovo/x220/Kconfig @@ -73,9 +73,4 @@ config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID hex default 0x21db -config SEABIOS_PS2_TIMEOUT - int - depends on PAYLOAD_SEABIOS - default 3000 - endif # BOARD_LENOVO_X220 || BOARD_LENOVO_X220I diff --git a/src/mainboard/lenovo/x60/Kconfig b/src/mainboard/lenovo/x60/Kconfig index d80b22d..7667a75 100644 --- a/src/mainboard/lenovo/x60/Kconfig +++ b/src/mainboard/lenovo/x60/Kconfig @@ -49,9 +49,4 @@ config MAX_CPUS int default 2 -config SEABIOS_PS2_TIMEOUT - int - depends on PAYLOAD_SEABIOS - default 3000 - endif

1 0

Patch set updated for coreboot: mb/lenovo/x60, t60: Move EC CMOS parameters in checksummed space
by Arthur Heymans Jan. 31, 2017

Jan. 31, 2017

Arthur Heymans (arthur(a)aheymans.xyz) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/17041 -gerrit commit 0d44cfbd55b8570266dabacb296b2a539573b1d4 Author: Arthur Heymans <arthur(a)aheymans.xyz> Date: Sun Oct 16 23:09:16 2016 +0200 mb/lenovo/x60,t60: Move EC CMOS parameters in checksummed space This allows for defaults to be applied to CMOS parameters when cmos checksum is incorrect. This probably results in changed cmos settings for current users of these targets. Change-Id: Ifec0093f4b0dbaa51b96812a041f0eaf5c58ee86 Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- src/mainboard/lenovo/t60/cmos.layout | 26 ++++++++++++++------------ src/mainboard/lenovo/x60/cmos.layout | 27 ++++++++++++++------------- 2 files changed, 28 insertions(+), 25 deletions(-) diff --git a/src/mainboard/lenovo/t60/cmos.layout b/src/mainboard/lenovo/t60/cmos.layout index 2cd4e7b..af788c6 100644 --- a/src/mainboard/lenovo/t60/cmos.layout +++ b/src/mainboard/lenovo/t60/cmos.layout @@ -70,7 +70,20 @@ entries # coreboot config options: cpu 944 1 e 2 hyper_threading -#945 7 r 0 unused +#945 3 r 0 unused + +# coreboot config options: ec +948 1 e 1 touchpad +949 1 e 1 bluetooth +950 1 e 1 wwan +951 1 e 1 wlan +952 8 h 0 volume +960 1 e 9 first_battery +961 1 e 1 trackpoint +962 1 e 1 fn_ctrl_swap +963 1 e 1 sticky_fn +964 1 e 1 power_management_beeps +965 1 e 1 low_battery_beep # coreboot config options: check sums 984 16 h 0 check_sum @@ -83,17 +96,6 @@ entries 1048 4 r 0 C0DRT1 1052 4 r 0 C1DRT1 -1060 1 e 1 touchpad -1061 1 e 1 bluetooth -1062 1 e 1 wwan -1063 1 e 1 wlan -1064 8 h 0 volume -1072 1 e 9 first_battery -1073 1 e 1 trackpoint -1074 1 e 1 fn_ctrl_swap -1075 1 e 1 sticky_fn -1076 1 e 1 power_management_beeps -1077 1 e 1 low_battery_beep # ----------------------------------------------------------------- enumerations diff --git a/src/mainboard/lenovo/x60/cmos.layout b/src/mainboard/lenovo/x60/cmos.layout index 3e316c9..ebc6678 100644 --- a/src/mainboard/lenovo/x60/cmos.layout +++ b/src/mainboard/lenovo/x60/cmos.layout @@ -70,7 +70,20 @@ entries # coreboot config options: cpu 944 1 e 2 hyper_threading -#945 7 r 0 unused +#945 4 r 0 unused + +# coreboot config options: ec +949 1 e 9 first_battery +950 1 e 1 bluetooth +951 1 e 1 wwan +952 1 e 1 wlan +953 1 e 1 trackpoint +954 1 e 1 fn_ctrl_swap +955 1 e 1 sticky_fn +956 1 e 1 power_management_beeps +959 1 e 1 low_battery_beep +960 8 h 0 volume +968 8 h 0 tft_brightness # coreboot config options: check sums 984 16 h 0 check_sum @@ -82,18 +95,6 @@ entries 1040 8 r 0 RCVENMT 1048 4 r 0 C0DRT1 1052 4 r 0 C1DRT1 - -1064 8 h 0 volume -1072 8 h 0 tft_brightness -1080 1 e 9 first_battery -1081 1 e 1 bluetooth -1082 1 e 1 wwan -1083 1 e 1 wlan -1084 1 e 1 trackpoint -1085 1 e 1 fn_ctrl_swap -1086 1 e 1 sticky_fn -1087 1 e 1 power_management_beeps -1088 1 e 1 low_battery_beep # ----------------------------------------------------------------- enumerations

1 0

Patch set updated for coreboot: Add Baytrail ChromeOS devices using variant scheme
by Matt DeVillier Jan. 31, 2017

Jan. 31, 2017

Matt DeVillier (matt.devillier(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/18164 -gerrit commit 7553d7c6389d1e5282ff37ae1027f5bfc9394d16 Author: Matt DeVillier <matt.devillier(a)gmail.com> Date: Mon Jan 16 17:32:38 2017 -0600 Add Baytrail ChromeOS devices using variant scheme Add new ChromeOS devices banjo, candy, clapper, glimmer, gnawty, heli, kip, orco, quawks, squawks, sumo, swanky, and winky using their common reference board (rambi) as a base. Chromium sources used: firmware-banjo-5216.334.B 32ec493 [chromeos: vboot_loader: Set...] firmware-candy-5216.310.B 519ff11 [baytrail: Preserve VbNv around...] firmware-clapper-5216.199.B 80d55e3 [baytrail: add code for...] firmware-glimmer-5216.198.B fae0770 [baytrail: add code for...] firmware-gnawty-5216.239.B 952adb7 [Gnawty/Olay: Add 2nd source...] firmware-heli-5216.392.B f1f3604 [helis: Lock ME / TXE section...] firmware-kip-5216.227.B db3c5d9 [kip: update spd for for MT41K256M16*] firmware-orco-5216.362.B 76f1651 [Orco: Adjust rx delay for norm.] firmware-quawks-5216.204.B edb60c9 [Quawks: Update SPD data] firmware-squawks-5216.152.B c6573dc [Squawks: Update SPD data] firmware-sumo-5216.382.B c62b6f23 [Ninja, Sumo: Add SPD source...] firmware-swanky-5216.238.B 233b2a7 [Swanky: update SPD table] firmware-winky-5216.265.B ce91ffc [Add to support HT Micron...] The same basic cleanup/changes are made here as with the initial BYT variant commit: - remove unused ACPI trackpad/touchscreen devices - correct I2C addresses in SMBIOS entries - clean up comment formatting - remove ACPI device for unused light sensor - switch I2C ACPI devices from edge to level triggered interrupts, for better compatibility/functionality (and to be consistent with other recently-upstreamed ChromeOS devices) - Micron 2GB SPD file for kip with updated values renamed to distinguish from same file used by other boards Change-Id: Ic66f9b539afb5aff32c4c1a8563f6612f5a2927c Signed-off-by: Matt DeVillier <matt.devillier(a)gmail.com> --- src/mainboard/google/rambi/Kconfig | 52 +++++ src/mainboard/google/rambi/Kconfig.name | 52 +++++ src/mainboard/google/rambi/Makefile.inc | 1 + .../google/rambi/acpi/touchscreen_amtel.asl | 56 ----- .../google/rambi/acpi/touchscreen_atmel.asl | 56 +++++ .../google/rambi/acpi/touchscreen_elan.asl | 53 +++++ .../google/rambi/acpi/touchscreen_wdt.asl | 53 +++++ src/mainboard/google/rambi/acpi/trackpad_amtel.asl | 53 ----- src/mainboard/google/rambi/acpi/trackpad_atmel.asl | 53 +++++ src/mainboard/google/rambi/mainboard.c | 2 +- src/mainboard/google/rambi/romstage.c | 8 +- .../spd/HT_micron_HTTC4G63CFR-PBA_x16_4Gb.spd.hex | 32 +++ .../spd/Hynix_HMT425S6CFR6A_H5TC4G63CFR.spd.hex | 17 ++ .../rambi/spd/Samsung_2Gib_K4B4G1646Q-HYK0.spd.hex | 32 +++ .../rambi/spd/Samsung_2Gib_M471B5674QH0.spd.hex | 32 +++ .../spd/elpida_2GiB_dimm_EDJ4216EFBG-GNL-F.spd.hex | 16 ++ src/mainboard/google/rambi/spd/empty.spd.hex | 16 ++ .../spd/hynix_2GiB_dimm_H5TC4G63MFR-PBA.spd.hex | 16 ++ .../micron_2GiB_dimm_MT41K256M16HA-125a.spd.hex | 32 +++ .../spd/micron_2GiB_dimm_MT41K256M16TW-107.spd.hex | 32 +++ .../spd/samsung_2GiB_dimm_K4B4G1646E-BYK0.spd.hex | 17 ++ .../google/rambi/variants/banjo/Makefile.inc | 45 ++++ .../google/rambi/variants/banjo/devicetree.cb | 101 +++++++++ src/mainboard/google/rambi/variants/banjo/gpio.c | 229 ++++++++++++++++++++ .../variants/banjo/include/variant/acpi/dptf.asl | 41 ++++ .../banjo/include/variant/acpi/mainboard.asl | 17 ++ .../rambi/variants/banjo/include/variant/onboard.h | 33 +++ .../rambi/variants/banjo/include/variant/variant.h | 35 ++++ .../google/rambi/variants/candy/Makefile.inc | 58 ++++++ .../google/rambi/variants/candy/devicetree.cb | 102 +++++++++ src/mainboard/google/rambi/variants/candy/gpio.c | 229 ++++++++++++++++++++ .../variants/candy/include/variant/acpi/dptf.asl | 41 ++++ .../candy/include/variant/acpi/mainboard.asl | 19 ++ .../rambi/variants/candy/include/variant/onboard.h | 39 ++++ .../rambi/variants/candy/include/variant/variant.h | 42 ++++ .../google/rambi/variants/clapper/Makefile.inc | 45 ++++ .../google/rambi/variants/clapper/devicetree.cb | 89 ++++++++ src/mainboard/google/rambi/variants/clapper/gpio.c | 230 ++++++++++++++++++++ .../variants/clapper/include/variant/acpi/dptf.asl | 29 +++ .../clapper/include/variant/acpi/mainboard.asl | 19 ++ .../variants/clapper/include/variant/onboard.h | 39 ++++ .../variants/clapper/include/variant/variant.h | 35 ++++ .../enguarde/include/variant/acpi/mainboard.asl | 2 - .../variants/enguarde/include/variant/onboard.h | 2 - .../google/rambi/variants/glimmer/Makefile.inc | 55 +++++ .../google/rambi/variants/glimmer/devicetree.cb | 98 +++++++++ src/mainboard/google/rambi/variants/glimmer/gpio.c | 231 +++++++++++++++++++++ .../variants/glimmer/include/variant/acpi/dptf.asl | 42 ++++ .../glimmer/include/variant/acpi/mainboard.asl | 19 ++ .../variants/glimmer/include/variant/onboard.h | 39 ++++ .../variants/glimmer/include/variant/variant.h | 42 ++++ .../google/rambi/variants/gnawty/Makefile.inc | 49 +++++ .../google/rambi/variants/gnawty/devicetree.cb | 101 +++++++++ src/mainboard/google/rambi/variants/gnawty/gpio.c | 229 ++++++++++++++++++++ .../variants/gnawty/include/variant/acpi/dptf.asl | 41 ++++ .../gnawty/include/variant/acpi/mainboard.asl | 16 ++ .../variants/gnawty/include/variant/onboard.h | 39 ++++ .../variants/gnawty/include/variant/variant.h | 37 ++++ .../google/rambi/variants/heli/Makefile.inc | 55 +++++ .../google/rambi/variants/heli/devicetree.cb | 102 +++++++++ src/mainboard/google/rambi/variants/heli/gpio.c | 228 ++++++++++++++++++++ .../variants/heli/include/variant/acpi/dptf.asl | 41 ++++ .../heli/include/variant/acpi/mainboard.asl | 16 ++ .../rambi/variants/heli/include/variant/onboard.h | 33 +++ .../rambi/variants/heli/include/variant/variant.h | 36 ++++ .../google/rambi/variants/kip/Makefile.inc | 49 +++++ .../google/rambi/variants/kip/devicetree.cb | 101 +++++++++ src/mainboard/google/rambi/variants/kip/gpio.c | 230 ++++++++++++++++++++ .../variants/kip/include/variant/acpi/dptf.asl | 41 ++++ .../kip/include/variant/acpi/mainboard.asl | 16 ++ .../rambi/variants/kip/include/variant/onboard.h | 34 +++ .../rambi/variants/kip/include/variant/variant.h | 37 ++++ .../google/rambi/variants/orco/Makefile.inc | 49 +++++ .../google/rambi/variants/orco/devicetree.cb | 101 +++++++++ src/mainboard/google/rambi/variants/orco/gpio.c | 229 ++++++++++++++++++++ .../variants/orco/include/variant/acpi/dptf.asl | 42 ++++ .../orco/include/variant/acpi/mainboard.asl | 16 ++ .../rambi/variants/orco/include/variant/onboard.h | 33 +++ .../rambi/variants/orco/include/variant/variant.h | 37 ++++ .../google/rambi/variants/quawks/Makefile.inc | 49 +++++ .../google/rambi/variants/quawks/devicetree.cb | 98 +++++++++ src/mainboard/google/rambi/variants/quawks/gpio.c | 230 ++++++++++++++++++++ .../variants/quawks/include/variant/acpi/dptf.asl | 41 ++++ .../quawks/include/variant/acpi/mainboard.asl | 16 ++ .../variants/quawks/include/variant/onboard.h | 34 +++ .../variants/quawks/include/variant/variant.h | 37 ++++ .../rambi/include/variant/acpi/mainboard.asl | 8 +- .../google/rambi/variants/squawks/Makefile.inc | 49 +++++ .../google/rambi/variants/squawks/devicetree.cb | 98 +++++++++ src/mainboard/google/rambi/variants/squawks/gpio.c | 230 ++++++++++++++++++++ .../variants/squawks/include/variant/acpi/dptf.asl | 41 ++++ .../squawks/include/variant/acpi/mainboard.asl | 16 ++ .../variants/squawks/include/variant/onboard.h | 34 +++ .../variants/squawks/include/variant/variant.h | 37 ++++ .../google/rambi/variants/sumo/Makefile.inc | 49 +++++ .../google/rambi/variants/sumo/devicetree.cb | 102 +++++++++ src/mainboard/google/rambi/variants/sumo/gpio.c | 228 ++++++++++++++++++++ .../variants/sumo/include/variant/acpi/dptf.asl | 42 ++++ .../sumo/include/variant/acpi/mainboard.asl | 16 ++ .../rambi/variants/sumo/include/variant/onboard.h | 47 +++++ .../rambi/variants/sumo/include/variant/variant.h | 37 ++++ src/mainboard/google/rambi/variants/sumo/lan.c | 191 +++++++++++++++++ .../google/rambi/variants/swanky/Makefile.inc | 41 ++++ .../google/rambi/variants/swanky/devicetree.cb | 101 +++++++++ src/mainboard/google/rambi/variants/swanky/gpio.c | 229 ++++++++++++++++++++ .../variants/swanky/include/variant/acpi/dptf.asl | 41 ++++ .../swanky/include/variant/acpi/mainboard.asl | 16 ++ .../variants/swanky/include/variant/onboard.h | 33 +++ .../variants/swanky/include/variant/variant.h | 33 +++ .../google/rambi/variants/winky/Makefile.inc | 45 ++++ .../google/rambi/variants/winky/devicetree.cb | 102 +++++++++ src/mainboard/google/rambi/variants/winky/gpio.c | 228 ++++++++++++++++++++ .../variants/winky/include/variant/acpi/dptf.asl | 42 ++++ .../winky/include/variant/acpi/mainboard.asl | 16 ++ .../rambi/variants/winky/include/variant/onboard.h | 34 +++ .../rambi/variants/winky/include/variant/variant.h | 35 ++++ 116 files changed, 7372 insertions(+), 120 deletions(-) diff --git a/src/mainboard/google/rambi/Kconfig b/src/mainboard/google/rambi/Kconfig index a2bdc43..128e609 100644 --- a/src/mainboard/google/rambi/Kconfig +++ b/src/mainboard/google/rambi/Kconfig @@ -26,28 +26,80 @@ config MAINBOARD_DIR config VARIANT_DIR string + default "banjo" if BOARD_GOOGLE_BANJO + default "candy" if BOARD_GOOGLE_CANDY + default "clapper" if BOARD_GOOGLE_CLAPPER default "enguarde" if BOARD_GOOGLE_ENGUARDE + default "glimmer" if BOARD_GOOGLE_GLIMMER + default "gnawty" if BOARD_GOOGLE_GNAWTY + default "heli" if BOARD_GOOGLE_HELI + default "kip" if BOARD_GOOGLE_KIP default "ninja" if BOARD_GOOGLE_NINJA + default "orco" if BOARD_GOOGLE_ORCO + default "quawks" if BOARD_GOOGLE_QUAWKS default "rambi" if BOARD_GOOGLE_RAMBI + default "squawks" if BOARD_GOOGLE_SQUAWKS + default "sumo" if BOARD_GOOGLE_SUMO + default "swanky" if BOARD_GOOGLE_SWANKY + default "winky" if BOARD_GOOGLE_WINKY config MAINBOARD_PART_NUMBER string + default "Banjo" if BOARD_GOOGLE_BANJO + default "Candy" if BOARD_GOOGLE_CANDY + default "Clapper" if BOARD_GOOGLE_CLAPPER default "Enguarde" if BOARD_GOOGLE_ENGUARDE + default "Glimmer" if BOARD_GOOGLE_GLIMMER + default "Gnawty" if BOARD_GOOGLE_GNAWTY + default "Heli" if BOARD_GOOGLE_HELI + default "Kip" if BOARD_GOOGLE_KIP default "Ninja" if BOARD_GOOGLE_NINJA + default "Orco" if BOARD_GOOGLE_ORCO + default "Quawks" if BOARD_GOOGLE_QUAWKS default "Rambi" if BOARD_GOOGLE_RAMBI + default "Squawks" if BOARD_GOOGLE_SQUAWKS + default "Sumo" if BOARD_GOOGLE_SUMO + default "Swanky" if BOARD_GOOGLE_SWANKY + default "Winky" if BOARD_GOOGLE_WINKY config GBB_HWID string depends on CHROMEOS + default "BANJO TEST A-A 8843" if BOARD_GOOGLE_BANJO + default "CANDY TEST A-A 3347" if BOARD_GOOGLE_CANDY + default "CLAPPER TEST A-A 7705" if BOARD_GOOGLE_CLAPPER default "ENGUARDE TEST A-A 0128" if BOARD_GOOGLE_ENGUARDE + default "GLIMMER TEST 8028" if BOARD_GOOGLE_GLIMMER + default "GNAWTY TEST A-A 3347" if BOARD_GOOGLE_GNAWTY + default "HELI TEST A-A 7705" if BOARD_GOOGLE_HELI + default "KIP TEST A-A 0128" if BOARD_GOOGLE_KIP default "NINJA TEST A-A 0653" if BOARD_GOOGLE_NINJA + default "ORCO TEST 8028" if BOARD_GOOGLE_ORCO + default "QUAWKS TEST A-A 3347" if BOARD_GOOGLE_QUAWKS default "RAMBI TEST A-A 0128" if BOARD_GOOGLE_RAMBI + default "SQUAWKS TEST A-A 7705" if BOARD_GOOGLE_SQUAWKS + default "SUMO TEST A-A 8843" if BOARD_GOOGLE_SUMO + default "SWANKY TEST A-A 0653" if BOARD_GOOGLE_SWANKY + default "WINKY TEST 0128" if BOARD_GOOGLE_WINKY config DEVICETREE string + default "variants/banjo/devicetree.cb" if BOARD_GOOGLE_BANJO + default "variants/candy/devicetree.cb" if BOARD_GOOGLE_CANDY + default "variants/clapper/devicetree.cb" if BOARD_GOOGLE_CLAPPER default "variants/enguarde/devicetree.cb" if BOARD_GOOGLE_ENGUARDE + default "variants/glimmer/devicetree.cb" if BOARD_GOOGLE_GLIMMER + default "variants/gnawty/devicetree.cb" if BOARD_GOOGLE_GNAWTY + default "variants/heli/devicetree.cb" if BOARD_GOOGLE_HELI + default "variants/kip/devicetree.cb" if BOARD_GOOGLE_KIP default "variants/ninja/devicetree.cb" if BOARD_GOOGLE_NINJA + default "variants/orco/devicetree.cb" if BOARD_GOOGLE_ORCO + default "variants/quawks/devicetree.cb" if BOARD_GOOGLE_QUAWKS default "variants/rambi/devicetree.cb" if BOARD_GOOGLE_RAMBI + default "variants/squawks/devicetree.cb" if BOARD_GOOGLE_SQUAWKS + default "variants/sumo/devicetree.cb" if BOARD_GOOGLE_SUMO + default "variants/swanky/devicetree.cb" if BOARD_GOOGLE_SWANKY + default "variants/winky/devicetree.cb" if BOARD_GOOGLE_WINKY config EC_GOOGLE_CHROMEEC_BOARDNAME string diff --git a/src/mainboard/google/rambi/Kconfig.name b/src/mainboard/google/rambi/Kconfig.name index 0305bc4..12cc3ff 100644 --- a/src/mainboard/google/rambi/Kconfig.name +++ b/src/mainboard/google/rambi/Kconfig.name @@ -1,11 +1,63 @@ +config BOARD_GOOGLE_BANJO + bool "Banjo" + select BOARD_GOOGLE_BASEBOARD_RAMBI + +config BOARD_GOOGLE_CANDY + bool "Candy" + select BOARD_GOOGLE_BASEBOARD_RAMBI + +config BOARD_GOOGLE_CLAPPER + bool "Clapper" + select BOARD_GOOGLE_BASEBOARD_RAMBI + config BOARD_GOOGLE_ENGUARDE bool "Enguarde" select BOARD_GOOGLE_BASEBOARD_RAMBI +config BOARD_GOOGLE_GLIMMER + bool "Glimmer" + select BOARD_GOOGLE_BASEBOARD_RAMBI + +config BOARD_GOOGLE_GNAWTY + bool "Gnawty" + select BOARD_GOOGLE_BASEBOARD_RAMBI + +config BOARD_GOOGLE_HELI + bool "Heli" + select BOARD_GOOGLE_BASEBOARD_RAMBI + +config BOARD_GOOGLE_KIP + bool "Kip" + select BOARD_GOOGLE_BASEBOARD_RAMBI + config BOARD_GOOGLE_NINJA bool "Ninja" select BOARD_GOOGLE_BASEBOARD_RAMBI +config BOARD_GOOGLE_ORCO + bool "Orco" + select BOARD_GOOGLE_BASEBOARD_RAMBI + +config BOARD_GOOGLE_QUAWKS + bool "Quawks" + select BOARD_GOOGLE_BASEBOARD_RAMBI + +config BOARD_GOOGLE_SQUAWKS + bool "Squawks" + select BOARD_GOOGLE_BASEBOARD_RAMBI + config BOARD_GOOGLE_RAMBI bool "Rambi" select BOARD_GOOGLE_BASEBOARD_RAMBI + +config BOARD_GOOGLE_SUMO + bool "Sumo" + select BOARD_GOOGLE_BASEBOARD_RAMBI + +config BOARD_GOOGLE_SWANKY + bool "Swanky" + select BOARD_GOOGLE_BASEBOARD_RAMBI + +config BOARD_GOOGLE_WINKY + bool "Winky" + select BOARD_GOOGLE_BASEBOARD_RAMBI diff --git a/src/mainboard/google/rambi/Makefile.inc b/src/mainboard/google/rambi/Makefile.inc index b08002d..7c0fb35 100644 --- a/src/mainboard/google/rambi/Makefile.inc +++ b/src/mainboard/google/rambi/Makefile.inc @@ -24,6 +24,7 @@ smm-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.c ramstage-y += variants/$(VARIANT_DIR)/gpio.c ramstage-$(CONFIG_BOARD_GOOGLE_NINJA) += variants/$(VARIANT_DIR)/lan.c +ramstage-$(CONFIG_BOARD_GOOGLE_SUMO) += variants/$(VARIANT_DIR)/lan.c subdirs-y += variants/$(VARIANT_DIR) diff --git a/src/mainboard/google/rambi/acpi/touchscreen_amtel.asl b/src/mainboard/google/rambi/acpi/touchscreen_amtel.asl deleted file mode 100644 index 1aec3ce..0000000 --- a/src/mainboard/google/rambi/acpi/touchscreen_amtel.asl +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <variant/onboard.h> - -Scope (\_SB.I2C6) -{ - Device (ATSA) - { - Name (_HID, "ATML0001") - Name (_CID, EisaId ("PNP0C0E")) - Name (_DDN, "Atmel Touchscreen") - Name (_UID, 5) - Name (ISTP, 0) /* TouchScreen */ - - Name (_CRS, ResourceTemplate() - { - I2cSerialBus ( - BOARD_TOUCHSCREEN_I2C_ADDR, // SlaveAddress - ControllerInitiated, // SlaveMode - 400000, // ConnectionSpeed - AddressingMode7Bit, // AddressingMode - "\\_SB.I2C6", // ResourceSource - ) - Interrupt (ResourceConsumer, Level, ActiveLow) - { - BOARD_TOUCHSCREEN_IRQ - } - }) - - Method (_STA) - { - If (LEqual (\S6EN, 1)) { - Return (0xF) - } Else { - Return (0x0) - } - } - - /* Allow device to power off in S0 */ - Name (_S0W, 4) - - Name (_PRW, Package() { BOARD_TOUCHSCREEN_WAKE_GPIO, 0x3 }) - } -} diff --git a/src/mainboard/google/rambi/acpi/touchscreen_atmel.asl b/src/mainboard/google/rambi/acpi/touchscreen_atmel.asl new file mode 100644 index 0000000..1aec3ce --- /dev/null +++ b/src/mainboard/google/rambi/acpi/touchscreen_atmel.asl @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <variant/onboard.h> + +Scope (\_SB.I2C6) +{ + Device (ATSA) + { + Name (_HID, "ATML0001") + Name (_CID, EisaId ("PNP0C0E")) + Name (_DDN, "Atmel Touchscreen") + Name (_UID, 5) + Name (ISTP, 0) /* TouchScreen */ + + Name (_CRS, ResourceTemplate() + { + I2cSerialBus ( + BOARD_TOUCHSCREEN_I2C_ADDR, // SlaveAddress + ControllerInitiated, // SlaveMode + 400000, // ConnectionSpeed + AddressingMode7Bit, // AddressingMode + "\\_SB.I2C6", // ResourceSource + ) + Interrupt (ResourceConsumer, Level, ActiveLow) + { + BOARD_TOUCHSCREEN_IRQ + } + }) + + Method (_STA) + { + If (LEqual (\S6EN, 1)) { + Return (0xF) + } Else { + Return (0x0) + } + } + + /* Allow device to power off in S0 */ + Name (_S0W, 4) + + Name (_PRW, Package() { BOARD_TOUCHSCREEN_WAKE_GPIO, 0x3 }) + } +} diff --git a/src/mainboard/google/rambi/acpi/touchscreen_elan.asl b/src/mainboard/google/rambi/acpi/touchscreen_elan.asl new file mode 100644 index 0000000..ac0763d --- /dev/null +++ b/src/mainboard/google/rambi/acpi/touchscreen_elan.asl @@ -0,0 +1,53 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <variant/onboard.h> + +Scope (\_SB.I2C6) +{ + Device (ETSA) + { + Name (_HID, "ELAN0001") + Name (_DDN, "ELAN Touchscreen") + Name (_UID, 1) + Name (ISTP, 0) /* TouchScreen */ + + Name (_CRS, ResourceTemplate() + { + I2cSerialBus ( + BOARD_TOUCHSCREEN_I2C_ADDR, // SlaveAddress + ControllerInitiated, // SlaveMode + 400000, // ConnectionSpeed + AddressingMode7Bit, // AddressingMode + "\\_SB.I2C6", // ResourceSource + ) + Interrupt (ResourceConsumer, Level, ActiveLow) + { + BOARD_TOUCHSCREEN_IRQ + } + }) + + Method (_STA) + { + If (LEqual (\S6EN, 1)) { + Return (0xF) + } Else { + Return (0x0) + } + } + + /* Allow device to power off in S0 */ + Name (_S0W, 4) + } +} diff --git a/src/mainboard/google/rambi/acpi/touchscreen_wdt.asl b/src/mainboard/google/rambi/acpi/touchscreen_wdt.asl new file mode 100644 index 0000000..0b5c100 --- /dev/null +++ b/src/mainboard/google/rambi/acpi/touchscreen_wdt.asl @@ -0,0 +1,53 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <variant/onboard.h> + +Scope (\_SB.I2C6) +{ + Device (WTSA) + { + Name (_HID, "WDHT0001") + Name (_DDN, "WDT Touchscreen") + Name (_UID, 6) + Name (ISTP, 0) /* TouchScreen */ + + Name (_CRS, ResourceTemplate() + { + I2cSerialBus ( + BOARD_TOUCHSCREEN_I2C_ADDR, // SlaveAddress + ControllerInitiated, // SlaveMode + 400000, // ConnectionSpeed + AddressingMode7Bit, // AddressingMode + "\\_SB.I2C6", // ResourceSource + ) + Interrupt (ResourceConsumer, Level, ActiveLow) + { + BOARD_TOUCHSCREEN_IRQ + } + }) + + Method (_STA) + { + If (LEqual (\S6EN, 1)) { + Return (0xF) + } Else { + Return (0x0) + } + } + + /* Allow device to power off in S0 */ + Name (_S0W, 4) + } +} diff --git a/src/mainboard/google/rambi/acpi/trackpad_amtel.asl b/src/mainboard/google/rambi/acpi/trackpad_amtel.asl deleted file mode 100644 index 1d9fb46..0000000 --- a/src/mainboard/google/rambi/acpi/trackpad_amtel.asl +++ /dev/null @@ -1,53 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <variant/onboard.h> - -Scope (\_SB.I2C1) -{ - Device (ATPA) - { - Name (_HID, "ATML0000") - Name (_DDN, "Atmel Touchpad") - Name (_UID, 2) - Name (ISTP, 1) /* Touchpad */ - - Name (_CRS, ResourceTemplate() - { - I2cSerialBus ( - BOARD_TRACKPAD_I2C_ADDR, // SlaveAddress - ControllerInitiated, // SlaveMode - 400000, // ConnectionSpeed - AddressingMode7Bit, // AddressingMode - "\\_SB.I2C1", // ResourceSource - ) - Interrupt (ResourceConsumer, Level, ActiveLow) - { - BOARD_TRACKPAD_IRQ - } - }) - - Method (_STA) - { - If (LEqual (\S1EN, 1)) { - Return (0xF) - } Else { - Return (0x0) - } - } - - /* Allow device to power off in S0 */ - Name (_S0W, 4) - } -} diff --git a/src/mainboard/google/rambi/acpi/trackpad_atmel.asl b/src/mainboard/google/rambi/acpi/trackpad_atmel.asl new file mode 100644 index 0000000..1d9fb46 --- /dev/null +++ b/src/mainboard/google/rambi/acpi/trackpad_atmel.asl @@ -0,0 +1,53 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <variant/onboard.h> + +Scope (\_SB.I2C1) +{ + Device (ATPA) + { + Name (_HID, "ATML0000") + Name (_DDN, "Atmel Touchpad") + Name (_UID, 2) + Name (ISTP, 1) /* Touchpad */ + + Name (_CRS, ResourceTemplate() + { + I2cSerialBus ( + BOARD_TRACKPAD_I2C_ADDR, // SlaveAddress + ControllerInitiated, // SlaveMode + 400000, // ConnectionSpeed + AddressingMode7Bit, // AddressingMode + "\\_SB.I2C1", // ResourceSource + ) + Interrupt (ResourceConsumer, Level, ActiveLow) + { + BOARD_TRACKPAD_IRQ + } + }) + + Method (_STA) + { + If (LEqual (\S1EN, 1)) { + Return (0xF) + } Else { + Return (0x0) + } + } + + /* Allow device to power off in S0 */ + Name (_S0W, 4) + } +} diff --git a/src/mainboard/google/rambi/mainboard.c b/src/mainboard/google/rambi/mainboard.c index eaf3079..acd4ffe 100644 --- a/src/mainboard/google/rambi/mainboard.c +++ b/src/mainboard/google/rambi/mainboard.c @@ -129,7 +129,7 @@ static int int15_handler(void) static void mainboard_init(device_t dev) { mainboard_ec_init(); -#if IS_ENABLED(CONFIG_BOARD_GOOGLE_NINJA) +#if IS_ENABLED(CONFIG_BOARD_GOOGLE_NINJA) || IS_ENABLED(CONFIG_BOARD_GOOGLE_SUMO) lan_init(); #endif } diff --git a/src/mainboard/google/rambi/romstage.c b/src/mainboard/google/rambi/romstage.c index 152d5e6..d8ba001 100644 --- a/src/mainboard/google/rambi/romstage.c +++ b/src/mainboard/google/rambi/romstage.c @@ -32,11 +32,15 @@ static void *get_spd_pointer(char *spd_file_content, int total_spds, int *dual) ssus_disable_internal_pull(GPIO_SSUS_37_PAD); ssus_disable_internal_pull(GPIO_SSUS_38_PAD); ssus_disable_internal_pull(GPIO_SSUS_39_PAD); - +#ifdef GPIO_SSUS_40_PAD + ssus_disable_internal_pull(GPIO_SSUS_40_PAD); +#endif ram_id |= (ssus_get_gpio(GPIO_SSUS_37_PAD) << 0); ram_id |= (ssus_get_gpio(GPIO_SSUS_38_PAD) << 1); ram_id |= (ssus_get_gpio(GPIO_SSUS_39_PAD) << 2); - +#ifdef GPIO_SSUS_40_PAD + ram_id |= (ssus_get_gpio(GPIO_SSUS_40_PAD) << 3); +#endif printk(BIOS_DEBUG, "ram_id=%d, total_spds: %d\n", ram_id, total_spds); if (ram_id >= total_spds) diff --git a/src/mainboard/google/rambi/spd/HT_micron_HTTC4G63CFR-PBA_x16_4Gb.spd.hex b/src/mainboard/google/rambi/spd/HT_micron_HTTC4G63CFR-PBA_x16_4Gb.spd.hex new file mode 100644 index 0000000..19fa083 --- /dev/null +++ b/src/mainboard/google/rambi/spd/HT_micron_HTTC4G63CFR-PBA_x16_4Gb.spd.hex @@ -0,0 +1,32 @@ +92 13 0B 03 04 19 02 02 +03 52 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 +20 08 3C 3C 01 40 83 01 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 0F 11 40 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 07 92 01 +00 00 00 00 00 00 CC FB +48 54 54 43 34 47 36 33 +43 46 52 2D 50 42 41 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 diff --git a/src/mainboard/google/rambi/spd/Hynix_HMT425S6CFR6A_H5TC4G63CFR.spd.hex b/src/mainboard/google/rambi/spd/Hynix_HMT425S6CFR6A_H5TC4G63CFR.spd.hex new file mode 100644 index 0000000..8ced790 --- /dev/null +++ b/src/mainboard/google/rambi/spd/Hynix_HMT425S6CFR6A_H5TC4G63CFR.spd.hex @@ -0,0 +1,17 @@ +# Hynix HMT425S6CFR6A-PBA +92 13 0B 03 04 19 02 02 03 52 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 01 +00 00 00 00 00 00 00 00 00 88 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 0F 11 62 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 AD 01 00 00 00 00 00 00 C9 C0 +48 4D 54 34 32 35 53 36 43 46 52 36 41 2D 50 42 +20 20 4E 30 80 AD 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF diff --git a/src/mainboard/google/rambi/spd/Samsung_2Gib_K4B4G1646Q-HYK0.spd.hex b/src/mainboard/google/rambi/spd/Samsung_2Gib_K4B4G1646Q-HYK0.spd.hex new file mode 100644 index 0000000..ae17756 --- /dev/null +++ b/src/mainboard/google/rambi/spd/Samsung_2Gib_K4B4G1646Q-HYK0.spd.hex @@ -0,0 +1,32 @@ +92 12 0B 03 04 19 02 02 +03 11 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 +20 08 3C 3C 01 40 83 01 +00 00 00 00 00 00 00 00 +00 88 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 0F 01 11 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 80 CE 01 +00 00 00 00 00 00 6C F9 +4B 34 42 34 47 31 36 34 +36 51 2D 48 59 4B 30 20 +20 20 00 00 80 CE 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 diff --git a/src/mainboard/google/rambi/spd/Samsung_2Gib_M471B5674QH0.spd.hex b/src/mainboard/google/rambi/spd/Samsung_2Gib_M471B5674QH0.spd.hex new file mode 100644 index 0000000..fc27f6b --- /dev/null +++ b/src/mainboard/google/rambi/spd/Samsung_2Gib_M471B5674QH0.spd.hex @@ -0,0 +1,32 @@ +92 12 0B 03 04 19 02 02 +03 11 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 +20 08 3C 3C 01 40 83 01 +00 00 00 00 00 00 00 00 +00 88 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 0F 01 11 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 80 CE 01 +00 00 00 00 00 00 6C F9 +4D 34 37 31 42 35 36 37 +34 51 48 30 2D 59 4B 30 +20 20 00 00 80 CE 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 diff --git a/src/mainboard/google/rambi/spd/elpida_2GiB_dimm_EDJ4216EFBG-GNL-F.spd.hex b/src/mainboard/google/rambi/spd/elpida_2GiB_dimm_EDJ4216EFBG-GNL-F.spd.hex new file mode 100644 index 0000000..6e3eab3 --- /dev/null +++ b/src/mainboard/google/rambi/spd/elpida_2GiB_dimm_EDJ4216EFBG-GNL-F.spd.hex @@ -0,0 +1,16 @@ +92 12 0B 03 04 19 02 02 03 11 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 81 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 02 FE 00 00 00 00 00 00 00 A1 CE +45 44 4A 34 32 31 36 45 46 42 47 2D 47 4E 2D 46 +00 00 00 00 02 FE 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF diff --git a/src/mainboard/google/rambi/spd/empty.spd.hex b/src/mainboard/google/rambi/spd/empty.spd.hex new file mode 100644 index 0000000..9ec39f1 --- /dev/null +++ b/src/mainboard/google/rambi/spd/empty.spd.hex @@ -0,0 +1,16 @@ +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/google/rambi/spd/hynix_2GiB_dimm_H5TC4G63MFR-PBA.spd.hex b/src/mainboard/google/rambi/spd/hynix_2GiB_dimm_H5TC4G63MFR-PBA.spd.hex new file mode 100644 index 0000000..0e8c1bd --- /dev/null +++ b/src/mainboard/google/rambi/spd/hynix_2GiB_dimm_H5TC4G63MFR-PBA.spd.hex @@ -0,0 +1,16 @@ +92 12 0B 03 04 19 02 02 03 52 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 01 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 0F 11 22 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 AD 01 00 00 00 00 00 00 96 77 +48 4D 54 34 32 35 53 36 4D 46 52 36 41 2D 50 42 +20 20 4E 30 80 AD 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/google/rambi/spd/micron_2GiB_dimm_MT41K256M16HA-125a.spd.hex b/src/mainboard/google/rambi/spd/micron_2GiB_dimm_MT41K256M16HA-125a.spd.hex new file mode 100644 index 0000000..b8815c8 --- /dev/null +++ b/src/mainboard/google/rambi/spd/micron_2GiB_dimm_MT41K256M16HA-125a.spd.hex @@ -0,0 +1,32 @@ +92 13 0b 03 04 19 02 02 +03 11 01 08 09 00 fe 02 +69 78 69 30 69 11 10 79 +20 08 3c 3c 01 18 83 05 +00 00 ca 00 00 00 00 00 +00 88 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 0f 01 62 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 80 2c 00 +00 00 00 00 00 00 ec b8 +34 4b 54 46 32 35 36 36 +34 48 5a 2d 31 47 39 50 +31 20 50 32 80 2c 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff diff --git a/src/mainboard/google/rambi/spd/micron_2GiB_dimm_MT41K256M16TW-107.spd.hex b/src/mainboard/google/rambi/spd/micron_2GiB_dimm_MT41K256M16TW-107.spd.hex new file mode 100644 index 0000000..91133b4 --- /dev/null +++ b/src/mainboard/google/rambi/spd/micron_2GiB_dimm_MT41K256M16TW-107.spd.hex @@ -0,0 +1,32 @@ +92 13 0b 03 04 19 02 02 +03 11 01 08 09 00 fe 02 +69 78 69 30 69 11 10 79 +20 08 3c 3c 01 18 83 05 +00 00 ca 00 00 00 00 00 +00 88 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 0f 01 62 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 80 2c 00 +00 00 00 00 00 00 45 1d +34 4b 54 46 32 35 36 36 +34 48 5a 2d 31 47 39 50 +31 20 50 31 80 2c 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff diff --git a/src/mainboard/google/rambi/spd/samsung_2GiB_dimm_K4B4G1646E-BYK0.spd.hex b/src/mainboard/google/rambi/spd/samsung_2GiB_dimm_K4B4G1646E-BYK0.spd.hex new file mode 100644 index 0000000..841291b --- /dev/null +++ b/src/mainboard/google/rambi/spd/samsung_2GiB_dimm_K4B4G1646E-BYK0.spd.hex @@ -0,0 +1,17 @@ +# Samsung K4B4G1646E-BYK0 +92 13 0B 03 04 19 02 02 03 11 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 01 +00 00 00 00 00 00 00 00 00 88 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 0F 01 62 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 CE 01 00 00 00 00 00 00 CA 0F +4D 34 37 31 42 35 36 37 34 45 42 30 2D 59 4B 30 +20 20 00 00 80 CE 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/google/rambi/variants/banjo/Makefile.inc b/src/mainboard/google/rambi/variants/banjo/Makefile.inc new file mode 100644 index 0000000..e925263 --- /dev/null +++ b/src/mainboard/google/rambi/variants/banjo/Makefile.inc @@ -0,0 +1,45 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2014 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +SPD_BIN = $(obj)/spd.bin + +# Order matters for SPD sources. The following indicies +# define the SPD data to use. +# 0b000 - 2GiB total - 1 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz +# 0b001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz +# 0b010 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz +# 0b011 - 4GiB total - 2 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz +# 0b100 - 2GiB total - 1 x 2GiB Hynix H5TC4G63CFR-PBA 1600MHz +# 0b101 - 4GiB total - 2 x 2GiB Hynix H5TC4G63CFR-PBA 1600MHz +SPD_SOURCES = samsung_2GiB_dimm_K4B4G1646Q-HYK0 +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += samsung_2GiB_dimm_K4B4G1646Q-HYK0 +SPD_SOURCES += Hynix_HMT425S6CFR6A_H5TC4G63CFR +SPD_SOURCES += Hynix_HMT425S6CFR6A_H5TC4G63CFR + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex) + +# Include spd ROM data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/google/rambi/variants/banjo/devicetree.cb b/src/mainboard/google/rambi/variants/banjo/devicetree.cb new file mode 100644 index 0000000..e380920 --- /dev/null +++ b/src/mainboard/google/rambi/variants/banjo/devicetree.cb @@ -0,0 +1,101 @@ +chip soc/intel/baytrail + + # SATA port enable mask (2 ports) + register "sata_port_map" = "0x1" + register "sata_ahci" = "0x1" + register "ide_legacy_combined" = "0x0" + + # Route USB ports to XHCI + register "usb_route_to_xhci" = "1" + + # USB Port Disable Mask + register "usb2_port_disable_mask" = "0x0" + register "usb3_port_disable_mask" = "0x0" + + # USB PHY settings + # TODO: These values are from Baytrail and need tuned for Banjo board + register "usb2_per_port_lane0" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" + register "usb2_per_port_lane1" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" + register "usb2_per_port_lane2" = "0x00049209" + register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" + register "usb2_per_port_lane3" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" + + # LPE audio codec settings + register "lpe_codec_clk_freq" = "25" # 25MHz clock + register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] + + # SD Card controller + register "sdcard_cap_low" = "0x0" + register "sdcard_cap_high" = "0x0" + + # Enable devices in ACPI mode + register "lpe_acpi_mode" = "1" + register "lpss_acpi_mode" = "1" + register "scc_acpi_mode" = "1" + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + # Enable PIPEA as DP_C + register "gpu_pipea_port_select" = "2" # DP_C + register "gpu_pipea_power_cycle_delay" = "6" # 600ms + register "gpu_pipea_power_on_delay" = "5000" # 500ms + register "gpu_pipea_light_on_delay" = "70" # 7ms + register "gpu_pipea_power_off_delay" = "500" # 50ms + register "gpu_pipea_light_off_delay" = "2000" # 200ms + + # VR PS2 control + register "vnn_ps2_enable" = "1" + register "vcc_ps2_enable" = "1" + + # Disable SLP_X stretching after SUS power well fail. + register "disable_slp_x_stretch_sus_fail" = "1" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # SoC router + device pci 02.0 on end # GFX + device pci 11.0 off end # SDIO + device pci 12.0 off end # SD + device pci 13.0 on end # SATA + device pci 14.0 on end # XHCI + device pci 15.0 on end # LPE + device pci 17.0 on end # MMC + device pci 18.0 on end # SIO_DMA1 + device pci 18.1 on end # I2C1 + device pci 18.2 on end # I2C2 + device pci 18.3 off end # I2C3 + device pci 18.4 off end # I2C4 + device pci 18.5 off end # I2C5 + device pci 18.6 off end # I2C6 + device pci 18.7 off end # I2C7 + device pci 1a.0 on end # TXE + device pci 1b.0 on end # HDA + device pci 1c.0 on end # PCIE_PORT1 + device pci 1c.1 off end # PCIE_PORT2 + device pci 1c.2 off end # PCIE_PORT3 + device pci 1c.3 off end # PCIE_PORT4 + device pci 1d.0 on end # EHCI + device pci 1e.0 on end # SIO_DMA2 + device pci 1e.1 off end # PWM1 + device pci 1e.2 off end # PWM2 + device pci 1e.3 off end # HSUART1 + device pci 1e.4 off end # HSUART2 + device pci 1e.5 off end # SPI + device pci 1f.0 on + chip ec/google/chromeec + # We only have one init function that + # we need to call to initialize the + # keyboard part of the EC. + device pnp ff.1 on # dummy address + end + end + end # LPC Bridge + device pci 1f.3 off end # SMBus + end +end diff --git a/src/mainboard/google/rambi/variants/banjo/gpio.c b/src/mainboard/google/rambi/variants/banjo/gpio.c new file mode 100644 index 0000000..bfb2c9a --- /dev/null +++ b/src/mainboard/google/rambi/variants/banjo/gpio.c @@ -0,0 +1,229 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdlib.h> +#include <soc/gpio.h> +#include <mainboard/google/rambi/irqroute.h> + +/* NCORE GPIOs */ +static const struct soc_gpio_map gpncore_gpio_map[] = { + GPIO_FUNC2, /* S0_NC00 - INT_HDMI_HPD - INT */ + GPIO_FUNC2, /* S0_NC01 - HDMI_DDCDATA_SW */ + GPIO_FUNC2, /* S0_NC02 - HDMI_DDCCLK_SW */ + GPIO_NC, /* S0_NC03 - NC */ + GPIO_NC, /* S0_NC04 - NC */ + GPIO_NC, /* S0_NC05 - NC */ + GPIO_FUNC2, /* S0_NC06 - EDP_HPD_L */ + GPIO_INPUT, /* S0_NC07 - DDI1_DDCDATA - STRAP */ + GPIO_NC, /* S0_NC08 - NC */ + GPIO_OUT_HIGH, /* S0_NC09 - SOC_DISP_ON_C */ + GPIO_FUNC2, /* S0_NC10 - SOC_EDP_BLON_C */ + GPIO_FUNC2, /* S0_NC11 - SOC_DPST_PWM_C */ + GPIO_NC, /* S0_NC12 - NC */ + GPIO_INPUT, /* S0_NC13 - GPIO_NC13 - STRAP */ + GPIO_NC, /* S0_NC14 - NC */ + GPIO_DEFAULT, /* S0_NC15 - XDP_GPIO_S0_NC15 */ + GPIO_DEFAULT, /* S0_NC16 - XDP_GPIO_S0_NC16 */ + GPIO_DEFAULT, /* S0_NC17 - XDP_GPIO_S0_NC17 */ + GPIO_DEFAULT, /* S0_NC18 - XDP_GPIO_S0_NC18 */ + GPIO_DEFAULT, /* S0_NC19 - XDP_GPIO_S0_NC19 */ + GPIO_DEFAULT, /* S0_NC20 - XDP_GPIO_S0_NC20 */ + GPIO_DEFAULT, /* S0_NC21 - XDP_GPIO_S0_NC21 */ + GPIO_DEFAULT, /* S0_NC22 - XDP_GPIO_S0_NC22 */ + GPIO_DEFAULT, /* S0_NC23 - XDP_GPIO_S0_NC23 */ + GPIO_NC, /* S0_NC24 - NC */ + GPIO_NC, /* S0_NC25 - NC */ + GPIO_NC, /* S0_NC26 - NC */ + GPIO_END +}; + +/* SCORE GPIOs */ +static const struct soc_gpio_map gpscore_gpio_map[] = { + GPIO_ACPI_SCI, /* S0_SC000 - SOC_KBC_SCI - INT */ + GPIO_FUNC2, /* S0_SC001 - SATA_DEVSLP_C */ + GPIO_NC, /* S0-SC002 - SATA_LED_R_N (NC/PU) */ + GPIO_NC, /* S0-SC003 - PCIE_CLKREQ_IMAGE# */ + GPIO_FUNC1, /* S0-SC004 - PCIE_CLKREQ_WLAN# */ + GPIO_NC, /* S0-SC005 - PCIE_CLKREQ_LAN# (NC) */ + GPIO_NC, /* S0-SC006 - PCIE_CLKREQ3# (NC) */ + GPIO_FUNC(2, PULL_DISABLE, 10K), /* S0-SC007 - SD3_WP external pull */ + GPIO_NC, /* S0-SC008 - ACZ_RST# (NC) */ + GPIO_NC, /* S0-SC009 - ACZ_SYNC (NC) */ + GPIO_NC, /* S0-SC010 - ACZ_BCLK (NC) */ + GPIO_NC, /* S0-SC011 - ACZ_STDOUT (NC) */ + GPIO_NC, /* S0-SC012 - PCH_AZ_CODEC_SDIN0 (NC) */ + GPIO_NC, /* S0-SC013 - NC */ + GPIO_INPUT, /* S0-SC014 - DET_TRIGGER - INT */ + GPIO_INPUT, /* S0-SC015 - AJACK_MICPRES_L - INT */ + GPIO_FUNC(3, PULL_DOWN, 20K), /* S0-SC016 - MMC1_45_CLK */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC017 - MMC1_45_D[0] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC018 - MMC1_45_D[1] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC019 - MMC1_45_D[2] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC020 - MMC1_45_D[3] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC021 - MMC1_45_D[4] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC022 - MMC1_45_D[5] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC023 - MMC1_45_D[6] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC024 - MMC1_45_D[7] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC025 - MMC1_45_CMD */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC026 - MMC1_45_RST */ + GPIO_NC, /* S0-SC027 - NC */ + GPIO_NC, /* S0-SC028 - NC */ + GPIO_NC, /* S0-SC029 - NC */ + GPIO_NC, /* S0-SC030 - NC */ + GPIO_NC, /* S0-SC031 - NC */ + GPIO_NC, /* S0-SC032 - NC */ + GPIO_NC, /* S0-SC033 - SD3_CLK */ + GPIO_NC, /* S0-SC034 - SD3_D0 */ + GPIO_NC, /* S0-SC035 - SD3_D1 */ + GPIO_NC, /* S0-SC036 - SD3_D2 */ + GPIO_NC, /* S0-SC037 - SD3_D3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC038 - SD3_CD# */ + GPIO_NC, /* S0-SC039 - SD3_CMD */ + GPIO_NC, /* S0-SC040 - SDMMC3_1P8_EN - TP3 */ + GPIO_NC, /* S0-SC041 - SDIO3_PWR_EN# */ + GPIO_FUNC1, /* S0-SC042 - LPC_LAD0 */ + GPIO_FUNC1, /* S0-SC043 - LPC-LAD1 */ + GPIO_FUNC1, /* S0-SC044 - LPC_LAD2 */ + GPIO_FUNC1, /* S0-SC045 - LPC_LAD3 */ + GPIO_FUNC1, /* S0-SC046 - LPC_LFRAME# */ + GPIO_FUNC1, /* S0-SC047 - PCLK_TPM */ + GPIO_FUNC1, /* S0-SC048 - CLK_PCI_EC */ + GPIO_FUNC1, /* S0-SC049 - LPC_CLKRUN_L */ + GPIO_NC, /* S0-SC050 - IRQ_SERIRQ */ + GPIO_NC, /* S0-SC051 - SMB_SOC_DATA (XDP) */ + GPIO_NC, /* S0-SC052 - SMB_SOC_CLK (XDP) */ + GPIO_NC, /* S0-SC053 - SMB_SOC_ALERTB (NC) */ + GPIO_DEFAULT, /* S0-SC054 - NC */ + GPIO_DIRQ, /* S0-SC055 - TRACKPAD_INT_DX */ + GPIO_INPUT, /* S0-SC056 - GPIO_S0_SC_56 - STRAP */ + GPIO_FUNC1, /* S0-SC057 - PCH_UART_TXD */ + GPIO_INPUT, /* S0-SC058 - SIM_DET_C */ + GPIO_INPUT_LEGACY, /* S0-SC059 - EC_IN_RW_C */ + GPIO_NC, /* S0-SC060 - NC */ + GPIO_FUNC1, /* S0-SC061 - SOC_UART_RX */ + GPIO_FUNC1, /* S0-SC062 - I2S_BCLK */ + GPIO_FUNC1, /* S0-SC063 - I2S_LRCLK */ + GPIO_FUNC1, /* S0-SC064 - I2S_DIN */ + GPIO_FUNC1, /* S0-SC065 - I2S_DOUT */ + GPIO_FUNC1, /* S0-SC066 - SIO_SPI_CS# */ + GPIO_FUNC1, /* S0-SC067 - SIO_SPI_MISO */ + GPIO_FUNC1, /* S0-SC068 - SIO_SPI_MOSI */ + GPIO_FUNC1, /* S0-SC069 - SIO_SPI_CLK */ + GPIO_NC, /* S0-SC070 - ALS_INT_L - INT(NC) */ + GPIO_NC, /* S0-SC071 - NC */ + GPIO_DIRQ, /* S0-SC072 - TOUCH_INT_L_DX */ + GPIO_NC, /* S0-SC073 - NC */ + GPIO_NC, /* S0-SC074 - SIO_UART2_RXD (NC) */ + GPIO_NC, /* S0-SC075 - SIO_UART2_TXD (NC) */ + GPIO_INPUT, /* S0-SC076 - BIOS_STRAP - STRAP */ + GPIO_INPUT, /* S0-SC077 - SOC_OVERRIDE - STRAP */ + GPIO_FUNC1, /* S0-SC078 - I2C_0_SDA */ + GPIO_FUNC1, /* S0-SC079 - I2C_0_SCL */ + GPIO_FUNC1, /* S0-SC080 - I2C_1_SDA */ + GPIO_FUNC1, /* S0-SC081 - I2C_1_SCL */ + GPIO_NC, /* S0-SC082 - NC */ + GPIO_NC, /* S0-SC083 - NC */ + GPIO_NC, /* S0-SC084 - NC */ + GPIO_NC, /* S0-SC085 - NC */ + GPIO_NC, /* S0-SC086 - I2C_4_SDA */ + GPIO_NC, /* S0-SC087 - I2C_4_SCL */ + GPIO_NC, /* S0-SC088 - I2C_5_SDA */ + GPIO_NC, /* S0-SC089 - I2C_5_SCL */ + GPIO_NC, /* S0-SC090 - NC */ + GPIO_NC, /* S0-SC091 - NC */ + GPIO_NC, /* S0-SC092 - I2C_NGFF_SDA (NC/PU) */ + GPIO_NC, /* S0-SC093 - I2C_NGFF_SCL (NC/PU) */ + GPIO_NC, /* S0-SC094 - NC */ + GPIO_NC, /* S0-SC095 - SIO_PWM1 (NC) */ + GPIO_FUNC1, /* S0-SC096 - I2S_MCLK */ + GPIO_NC, /* S0-SC097 - NC */ + GPIO_NC, /* S0-SC098 - NC */ + GPIO_NC, /* S0-SC099 - NC */ + GPIO_NC, /* S0-SC100 - NC */ + GPIO_DIRQ, /* S0-SC101 - KBD_IRQ# */ + GPIO_END +}; + +/* SSUS GPIOs */ +static const struct soc_gpio_map gpssus_gpio_map[] = { + GPIO_ACPI_WAKE, /* S500 - PCH_WAKE# */ + GPIO_ACPI_WAKE, /* S501 - TRACKPAD_INT# - INT */ + GPIO_NC, /* S502 - TOUCH_INT# - INT */ + GPIO_FUNC6, /* S503 - LTE_WAKE_L# - INT */ + GPIO_NC, /* S504 - SOC_JTAG2_TDO (NC/PU) */ + GPIO_FUNC1, /* S505 - SUS_CLK_WLAN (NC) */ + GPIO_INPUT_PU, /* S506 - PCH_SPI_WP */ + GPIO_ACPI_SMI, /* S507 - SOC_KBC_SMI - INT */ + GPIO_NC, /* S508 - NC */ + GPIO_DIRQ, /* S509 - MUX_AUD_INT1# */ + GPIO_OUT_HIGH, /* S510 - WIFI_DISABLE_L */ + GPIO_FUNC0, /* S511 - SUSPWRDNACK */ + GPIO_FUNC0, /* S512 - WIFI_SUSCLK */ + GPIO_FUNC0, /* S513 - SLP_SX */ + GPIO_NC, /* S514 - NC */ + GPIO_FUNC0, /* S515 - WLAN_WAKE_L - INT */ + GPIO_FUNC0, /* S516 - PCH_PWRBTN_L */ + GPIO_NC, /* S517 - NC */ + GPIO_FUNC0, /* S518 - SUS_STAT# */ + GPIO_FUNC0, /* S519 - USB_OC0# */ + GPIO_FUNC0, /* S520 - USB_OC1# */ + GPIO_NC, /* S521 - NC */ + GPIO_NC, /* S522 - XDP_GPIO_DFX0 */ + GPIO_NC, /* S523 - XDP_GPIO_DFX1 */ + GPIO_NC, /* S524 - XDP_GPIO_DFX2 */ + GPIO_NC, /* S525 - XDP_GPIO_DFX3 */ + GPIO_NC, /* S526 - XDP_GPIO_DFX4 */ + GPIO_NC, /* S527 - XDP_GPIO_DFX5 */ + GPIO_NC, /* S528 - XDP_GPIO_DFX6 */ + GPIO_NC, /* S529 - XDP_GPIO_DFX7 */ + GPIO_NC, /* S530 - XDP_GPIO_DFX8 */ + GPIO_NC, /* S531 - NC */ + GPIO_NC, /* S532 - NC */ + GPIO_NC, /* S533 - NC */ + GPIO_NC, /* S534 - NC */ + GPIO_OUT_HIGH, /* S535 - LTE_DISABLE_L */ + GPIO_NC, /* S536 - NC */ + GPIO_INPUT, /* S537 - RAM_ID0 */ + GPIO_INPUT, /* S538 - RAM_ID1 */ + GPIO_INPUT, /* S539 - RAM_ID2 */ + GPIO_NC, /* S540 - NC */ + GPIO_NC, /* S541 - NC */ + GPIO_NC, /* S542 - NC */ + GPIO_NC, /* S543 - NC */ + GPIO_END +}; + +static const u8 core_dedicated_irq[GPIO_MAX_DIRQS] = { + [TPAD_IRQ_OFFSET] = TPAD_IRQ_GPIO, + [TOUCH_IRQ_OFFSET] = TOUCH_IRQ_GPIO, + [I8042_IRQ_OFFSET] = I8042_IRQ_GPIO, +}; + +static const u8 sus_dedicated_irq[GPIO_MAX_DIRQS] = { + [CODEC_IRQ_OFFSET] = CODEC_IRQ_GPIO, +}; + +static struct soc_gpio_config gpio_config = { + .ncore = gpncore_gpio_map, + .score = gpscore_gpio_map, + .ssus = gpssus_gpio_map, + .core_dirq = &core_dedicated_irq, + .sus_dirq = &sus_dedicated_irq, +}; + +struct soc_gpio_config* mainboard_get_gpios(void) +{ + return &gpio_config; +} diff --git a/src/mainboard/google/rambi/variants/banjo/include/variant/acpi/dptf.asl b/src/mainboard/google/rambi/variants/banjo/include/variant/acpi/dptf.asl new file mode 100644 index 0000000..4276b1c --- /dev/null +++ b/src/mainboard/google/rambi/variants/banjo/include/variant/acpi/dptf.asl @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define DPTF_CPU_PASSIVE 80 +#define DPTF_CPU_CRITICAL 90 + +#define DPTF_TSR0_SENSOR_ID 1 +#define DPTF_TSR0_SENSOR_NAME "TMP432_Internal" +#define DPTF_TSR0_PASSIVE 45 +#define DPTF_TSR0_CRITICAL 80 + +#define DPTF_TSR1_SENSOR_ID 2 +#define DPTF_TSR1_SENSOR_NAME "TMP432_Power_top" +#define DPTF_TSR1_PASSIVE 46 +#define DPTF_TSR1_CRITICAL 75 + +#define DPTF_TSR2_SENSOR_ID 3 +#define DPTF_TSR2_SENSOR_NAME "TMP432_CPU_bottom" +#define DPTF_TSR2_PASSIVE 44 +#define DPTF_TSR2_CRITICAL 75 + +#define DPTF_ENABLE_CHARGER + +/* Charger performance states, board-specific values from charger and EC */ +Name (CHPS, Package () { + Package () { 0, 0, 0, 0, 255, 0x6a4, "mA", 0 }, /* 1.7A (MAX) */ + Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 }, /* 1.5A */ + Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 }, /* 1.0A */ + Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 }, /* 0.5A */ + Package () { 0, 0, 0, 0, 0, 0x080, "mA", 0 }, /* 0.128A */ +}) diff --git a/src/mainboard/google/rambi/variants/banjo/include/variant/acpi/mainboard.asl b/src/mainboard/google/rambi/variants/banjo/include/variant/acpi/mainboard.asl new file mode 100644 index 0000000..5a46bdc --- /dev/null +++ b/src/mainboard/google/rambi/variants/banjo/include/variant/acpi/mainboard.asl @@ -0,0 +1,17 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Elan trackpad */ +#include <mainboard/google/rambi/acpi/trackpad_elan.asl> diff --git a/src/mainboard/google/rambi/variants/banjo/include/variant/onboard.h b/src/mainboard/google/rambi/variants/banjo/include/variant/onboard.h new file mode 100644 index 0000000..38410e1 --- /dev/null +++ b/src/mainboard/google/rambi/variants/banjo/include/variant/onboard.h @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ONBOARD_H +#define ONBOARD_H + +#include <mainboard/google/rambi/irqroute.h> + +/* PCH wake signal from EC. */ +#define BOARD_PCH_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(0) + +#define BOARD_TRACKPAD_NAME "trackpad" +#define BOARD_TRACKPAD_IRQ GPIO_S0_DED_IRQ(TPAD_IRQ_OFFSET) +#define BOARD_TRACKPAD_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(1) +#define BOARD_TRACKPAD_I2C_BUS 0 +#define BOARD_TRACKPAD_I2C_ADDR 0x15 + +#define BOARD_I8042_IRQ GPIO_S0_DED_IRQ(I8042_IRQ_OFFSET) +#define BOARD_CODEC_IRQ GPIO_S5_DED_IRQ(CODEC_IRQ_OFFSET) + +#endif diff --git a/src/mainboard/google/rambi/variants/banjo/include/variant/variant.h b/src/mainboard/google/rambi/variants/banjo/include/variant/variant.h new file mode 100644 index 0000000..a0134c0 --- /dev/null +++ b/src/mainboard/google/rambi/variants/banjo/include/variant/variant.h @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef VARIANT_H +#define VARIANT_H + +/* + * RAM_ID[2:0] are on GPIO_SSUS[39:37] + * 0b000 - 2GiB total - 1 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz + * 0b001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + * 0b010 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + * 0b011 - 4GiB total - 2 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz + * 0b100 - 2GiB total - 1 x 2GiB Hynix H5TC4G63CFR-PBA 1600MHz + * 0b101 - 4GiB total - 2 x 2GiB Hynix H5TC4G63CFR-PBA 1600MHz +*/ + +static const uint32_t dual_channel_config = + (1 << 1) | (1 << 3) | (1 << 5); + +#define SPD_SIZE 256 +#define GPIO_SSUS_37_PAD 57 +#define GPIO_SSUS_38_PAD 50 +#define GPIO_SSUS_39_PAD 58 + +#endif diff --git a/src/mainboard/google/rambi/variants/candy/Makefile.inc b/src/mainboard/google/rambi/variants/candy/Makefile.inc new file mode 100644 index 0000000..0a53d84 --- /dev/null +++ b/src/mainboard/google/rambi/variants/candy/Makefile.inc @@ -0,0 +1,58 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +SPD_BIN = $(obj)/spd.bin + +# Order matters for SPD sources. The following indicies +# define the SPD data to use. +# 0b0000 - 4GiB total - 2 x 2GiB Micron MT41K256M16HA-125:E 1600MHz +# 0b0001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz +# 0b0010 - 4GiB total - 2 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz +# 0b0011 - 2GiB total - 1 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz +# 0b0100 - 2GiB total - 1 x 2GiB Micron MT41K256M16HA-125:E 1600MHz +# 0b0101 - 2GiB total - 1 x 2GiB Hynix H5TC2G63FFR-PBA 1600MHz +# 0b0110 - 4GiB total - 2 x 2GiB Samsung K4B4G1646E-BYK0 1600MHz +# 0b0111 - 4GiB total - 2 x 2GiB Micron MT41K256M16TW-107 1600MHz +# 0b1000 - 2GiB total - 1 x 2GiB Samsung K4B4G1646E-BYK0 1600MHz +# 0b1001 - 2GiB total - 1 x 2GiB Micron MT41K256M16TW-107 1600MHz +# 0b1010 - 4GiB total - 2 x 2GiB Hynix H5TC4G63CFR-PBA 1600MHz +# 0b1011 - 2GiB total - 1 x 2GiB Hynix H5TC4G63CFR-PBA 1600MHz + +SPD_SOURCES = micron_2GiB_dimm_MT41K256M16HA-125 +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += samsung_2GiB_dimm_K4B4G1646Q-HYK0 +SPD_SOURCES += samsung_2GiB_dimm_K4B4G1646Q-HYK0 +SPD_SOURCES += micron_2GiB_dimm_MT41K256M16HA-125 +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += samsung_2GiB_dimm_K4B4G1646E-BYK0 +SPD_SOURCES += micron_2GiB_dimm_MT41K256M16TW-107 +SPD_SOURCES += samsung_2GiB_dimm_K4B4G1646E-BYK0 +SPD_SOURCES += micron_2GiB_dimm_MT41K256M16TW-107 +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63CFR-PBA +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63CFR-PBA + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex) + +# Include spd ROM data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/google/rambi/variants/candy/devicetree.cb b/src/mainboard/google/rambi/variants/candy/devicetree.cb new file mode 100644 index 0000000..5cbb974 --- /dev/null +++ b/src/mainboard/google/rambi/variants/candy/devicetree.cb @@ -0,0 +1,102 @@ +chip soc/intel/baytrail + + # SATA port enable mask (2 ports) + register "sata_port_map" = "0x1" + register "sata_ahci" = "0x1" + register "ide_legacy_combined" = "0x0" + + # Route USB ports to XHCI + register "usb_route_to_xhci" = "1" + + # USB Port Disable Mask + register "usb2_port_disable_mask" = "0x0" + register "usb3_port_disable_mask" = "0x0" + + # USB PHY settings + # TODO: These values are from Baytrail and need tuned for Candy board + register "usb2_per_port_lane0" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" + register "usb2_per_port_lane1" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" + register "usb2_per_port_lane2" = "0x00049209" + register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" + register "usb2_per_port_lane3" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" + register "usb2_comp_bg" = "0x4700" + + # LPE audio codec settings + register "lpe_codec_clk_freq" = "25" # 25MHz clock + register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] + + # SD Card controller + register "sdcard_cap_low" = "0x036864b2" + register "sdcard_cap_high" = "0x0" + + # Enable devices in ACPI mode + register "lpe_acpi_mode" = "1" + register "lpss_acpi_mode" = "1" + register "scc_acpi_mode" = "1" + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + # Enable PIPEA as DP_C + register "gpu_pipea_port_select" = "2" # DP_C + register "gpu_pipea_power_cycle_delay" = "6" # 600ms + register "gpu_pipea_power_on_delay" = "5000" # 500ms + register "gpu_pipea_light_on_delay" = "70" # 7ms + register "gpu_pipea_power_off_delay" = "500" # 50ms + register "gpu_pipea_light_off_delay" = "2000" # 200ms + + # VR PS2 control + register "vnn_ps2_enable" = "1" + register "vcc_ps2_enable" = "1" + + # Disable SLP_X stretching after SUS power well fail. + register "disable_slp_x_stretch_sus_fail" = "1" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # SoC router + device pci 02.0 on end # GFX + device pci 11.0 off end # SDIO + device pci 12.0 on end # SD + device pci 13.0 on end # SATA + device pci 14.0 on end # XHCI + device pci 15.0 on end # LPE + device pci 17.0 on end # MMC + device pci 18.0 on end # SIO_DMA1 + device pci 18.1 on end # I2C1 + device pci 18.2 on end # I2C2 + device pci 18.3 off end # I2C3 + device pci 18.4 off end # I2C4 + device pci 18.5 off end # I2C5 + device pci 18.6 on end # I2C6 + device pci 18.7 off end # I2C7 + device pci 1a.0 on end # TXE + device pci 1b.0 on end # HDA + device pci 1c.0 on end # PCIE_PORT1 + device pci 1c.1 off end # PCIE_PORT2 + device pci 1c.2 off end # PCIE_PORT3 + device pci 1c.3 off end # PCIE_PORT4 + device pci 1d.0 on end # EHCI + device pci 1e.0 on end # SIO_DMA2 + device pci 1e.1 off end # PWM1 + device pci 1e.2 off end # PWM2 + device pci 1e.3 off end # HSUART1 + device pci 1e.4 off end # HSUART2 + device pci 1e.5 off end # SPI + device pci 1f.0 on + chip ec/google/chromeec + # We only have one init function that + # we need to call to initialize the + # keyboard part of the EC. + device pnp ff.1 on # dummy address + end + end + end # LPC Bridge + device pci 1f.3 off end # SMBus + end +end diff --git a/src/mainboard/google/rambi/variants/candy/gpio.c b/src/mainboard/google/rambi/variants/candy/gpio.c new file mode 100644 index 0000000..3cbfbaf --- /dev/null +++ b/src/mainboard/google/rambi/variants/candy/gpio.c @@ -0,0 +1,229 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdlib.h> +#include <soc/gpio.h> +#include <mainboard/google/rambi/irqroute.h> + +/* NCORE GPIOs */ +static const struct soc_gpio_map gpncore_gpio_map[] = { + GPIO_FUNC2, /* S0_NC00 - INT_HDMI_HPD - INT */ + GPIO_FUNC2, /* S0_NC01 - HDMI_DDCDATA_SW */ + GPIO_FUNC2, /* S0_NC02 - HDMI_DDCCLK_SW */ + GPIO_NC, /* S0_NC03 - NC */ + GPIO_NC, /* S0_NC04 - NC */ + GPIO_NC, /* S0_NC05 - NC */ + GPIO_FUNC2, /* S0_NC06 - EDP_HPD_L */ + GPIO_INPUT, /* S0_NC07 - DDI1_DDCDATA - STRAP */ + GPIO_NC, /* S0_NC08 - NC */ + GPIO_OUT_HIGH, /* S0_NC09 - SOC_DISP_ON_C */ + GPIO_FUNC2, /* S0_NC10 - SOC_EDP_BLON_C */ + GPIO_FUNC2, /* S0_NC11 - SOC_DPST_PWM_C */ + GPIO_NC, /* S0_NC12 - NC */ + GPIO_INPUT, /* S0_NC13 - GPIO_NC13 - STRAP */ + GPIO_NC, /* S0_NC14 - NC */ + GPIO_DEFAULT, /* S0_NC15 - XDP_GPIO_S0_NC15 */ + GPIO_DEFAULT, /* S0_NC16 - XDP_GPIO_S0_NC16 */ + GPIO_DEFAULT, /* S0_NC17 - XDP_GPIO_S0_NC17 */ + GPIO_DEFAULT, /* S0_NC18 - XDP_GPIO_S0_NC18 */ + GPIO_DEFAULT, /* S0_NC19 - XDP_GPIO_S0_NC19 */ + GPIO_DEFAULT, /* S0_NC20 - XDP_GPIO_S0_NC20 */ + GPIO_DEFAULT, /* S0_NC21 - XDP_GPIO_S0_NC21 */ + GPIO_DEFAULT, /* S0_NC22 - XDP_GPIO_S0_NC22 */ + GPIO_DEFAULT, /* S0_NC23 - XDP_GPIO_S0_NC23 */ + GPIO_NC, /* S0_NC24 - NC */ + GPIO_NC, /* S0_NC25 - NC */ + GPIO_NC, /* S0_NC26 - NC */ + GPIO_END +}; + +/* SCORE GPIOs */ +static const struct soc_gpio_map gpscore_gpio_map[] = { + GPIO_ACPI_SCI, /* S0_SC000 - SOC_KBC_SCI - INT */ + GPIO_FUNC2, /* S0_SC001 - SATA_DEVSLP_C */ + GPIO_NC, /* S0-SC002 - SATA_LED_R_N (NC/PU) */ + GPIO_FUNC1, /* S0-SC003 - PCIE_CLKREQ_IMAGE# */ + GPIO_FUNC1, /* S0-SC004 - PCIE_CLKREQ_WLAN# */ + GPIO_NC, /* S0-SC005 - PCIE_CLKREQ_LAN# (NC) */ + GPIO_NC, /* S0-SC006 - PCIE_CLKREQ3# (NC) */ + GPIO_FUNC(2, PULL_DISABLE, 10K), /* S0-SC007 - SD3_WP external pull */ + GPIO_NC, /* S0-SC008 - ACZ_RST# (NC) */ + GPIO_NC, /* S0-SC009 - ACZ_SYNC (NC) */ + GPIO_NC, /* S0-SC010 - ACZ_BCLK (NC) */ + GPIO_NC, /* S0-SC011 - ACZ_STDOUT (NC) */ + GPIO_NC, /* S0-SC012 - PCH_AZ_CODEC_SDIN0 (NC) */ + GPIO_NC, /* S0-SC013 - NC */ + GPIO_INPUT, /* S0-SC014 - DET_TRIGGER - INT */ + GPIO_INPUT, /* S0-SC015 - AJACK_MICPRES_L - INT */ + GPIO_FUNC(3, PULL_DOWN, 20K), /* S0-SC016 - MMC1_45_CLK */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC017 - MMC1_45_D[0] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC018 - MMC1_45_D[1] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC019 - MMC1_45_D[2] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC020 - MMC1_45_D[3] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC021 - MMC1_45_D[4] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC022 - MMC1_45_D[5] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC023 - MMC1_45_D[6] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC024 - MMC1_45_D[7] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC025 - MMC1_45_CMD */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC026 - MMC1_45_RST */ + GPIO_NC, /* S0-SC027 - NC */ + GPIO_NC, /* S0-SC028 - NC */ + GPIO_NC, /* S0-SC029 - NC */ + GPIO_NC, /* S0-SC030 - NC */ + GPIO_NC, /* S0-SC031 - NC */ + GPIO_NC, /* S0-SC032 - NC */ + GPIO_FUNC(1, PULL_DOWN, 20K), /* S0-SC033 - SD3_CLK */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC034 - SD3_D0 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC035 - SD3_D1 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC036 - SD3_D2 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC037 - SD3_D3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC038 - SD3_CD# */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC039 - SD3_CMD */ + GPIO_NC, /* S0-SC040 - SDMMC3_1P8_EN - TP3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC041 - SDIO3_PWR_EN# */ + GPIO_FUNC1, /* S0-SC042 - LPC_LAD0 */ + GPIO_FUNC1, /* S0-SC043 - LPC-LAD1 */ + GPIO_FUNC1, /* S0-SC044 - LPC_LAD2 */ + GPIO_FUNC1, /* S0-SC045 - LPC_LAD3 */ + GPIO_FUNC1, /* S0-SC046 - LPC_LFRAME# */ + GPIO_FUNC1, /* S0-SC047 - PCLK_TPM */ + GPIO_FUNC1, /* S0-SC048 - CLK_PCI_EC */ + GPIO_FUNC1, /* S0-SC049 - LPC_CLKRUN_L */ + GPIO_NC, /* S0-SC050 - IRQ_SERIRQ */ + GPIO_NC, /* S0-SC051 - SMB_SOC_DATA (XDP) */ + GPIO_NC, /* S0-SC052 - SMB_SOC_CLK (XDP) */ + GPIO_NC, /* S0-SC053 - SMB_SOC_ALERTB (NC) */ + GPIO_DEFAULT, /* S0-SC054 - NC */ + GPIO_DIRQ, /* S0-SC055 - TRACKPAD_INT_DX */ + GPIO_INPUT, /* S0-SC056 - GPIO_S0_SC_56 - STRAP */ + GPIO_FUNC1, /* S0-SC057 - PCH_UART_TXD */ + GPIO_INPUT, /* S0-SC058 - SIM_DET_C */ + GPIO_INPUT_LEGACY, /* S0-SC059 - EC_IN_RW_C */ + GPIO_NC, /* S0-SC060 - NC */ + GPIO_FUNC1, /* S0-SC061 - SOC_UART_RX */ + GPIO_FUNC1, /* S0-SC062 - I2S_BCLK */ + GPIO_FUNC1, /* S0-SC063 - I2S_LRCLK */ + GPIO_FUNC1, /* S0-SC064 - I2S_DIN */ + GPIO_FUNC1, /* S0-SC065 - I2S_DOUT */ + GPIO_FUNC1, /* S0-SC066 - SIO_SPI_CS# */ + GPIO_FUNC1, /* S0-SC067 - SIO_SPI_MISO */ + GPIO_FUNC1, /* S0-SC068 - SIO_SPI_MOSI */ + GPIO_FUNC1, /* S0-SC069 - SIO_SPI_CLK */ + GPIO_NC, /* S0-SC070 - NC */ + GPIO_NC, /* S0-SC071 - NC */ + GPIO_DIRQ, /* S0-SC072 - TOUCH_INT_L_DX */ + GPIO_NC, /* S0-SC073 - NC */ + GPIO_NC, /* S0-SC074 - SIO_UART2_RXD (NC) */ + GPIO_NC, /* S0-SC075 - SIO_UART2_TXD (NC) */ + GPIO_INPUT, /* S0-SC076 - BIOS_STRAP - STRAP */ + GPIO_INPUT, /* S0-SC077 - SOC_OVERRIDE - STRAP */ + GPIO_FUNC1, /* S0-SC078 - I2C_0_SDA */ + GPIO_FUNC1, /* S0-SC079 - I2C_0_SCL */ + GPIO_FUNC1, /* S0-SC080 - I2C_1_SDA */ + GPIO_FUNC1, /* S0-SC081 - I2C_1_SCL */ + GPIO_NC, /* S0-SC082 - NC */ + GPIO_NC, /* S0-SC083 - NC */ + GPIO_NC, /* S0-SC084 - NC */ + GPIO_NC, /* S0-SC085 - NC */ + GPIO_FUNC1, /* S0-SC086 - I2C_4_SDA */ + GPIO_FUNC1, /* S0-SC087 - I2C_4_SCL */ + GPIO_FUNC1, /* S0-SC088 - I2C_5_SDA */ + GPIO_FUNC1, /* S0-SC089 - I2C_5_SCL */ + GPIO_NC, /* S0-SC090 - NC */ + GPIO_NC, /* S0-SC091 - NC */ + GPIO_NC, /* S0-SC092 - I2C_NGFF_SDA (NC/PU) */ + GPIO_NC, /* S0-SC093 - I2C_NGFF_SCL (NC/PU) */ + GPIO_NC, /* S0-SC094 - NC */ + GPIO_NC, /* S0-SC095 - SIO_PWM1 (NC) */ + GPIO_FUNC1, /* S0-SC096 - I2S_MCLK */ + GPIO_NC, /* S0-SC097 - NC */ + GPIO_NC, /* S0-SC098 - NC */ + GPIO_NC, /* S0-SC099 - NC */ + GPIO_NC, /* S0-SC100 - NC */ + GPIO_DIRQ, /* S0-SC101 - KBD_IRQ# */ + GPIO_END +}; + +/* SSUS GPIOs */ +static const struct soc_gpio_map gpssus_gpio_map[] = { + GPIO_ACPI_WAKE, /* S500 - PCH_WAKE# */ + GPIO_ACPI_WAKE, /* S501 - TRACKPAD_INT# - INT */ + GPIO_ACPI_WAKE, /* S502 - TOUCH_INT# - INT */ + GPIO_FUNC6, /* S503 - LTE_WAKE_L# - INT */ + GPIO_NC, /* S504 - SOC_JTAG2_TDO (NC/PU) */ + GPIO_FUNC1, /* S505 - SUS_CLK_WLAN (NC) */ + GPIO_INPUT_PU, /* S506 - PCH_SPI_WP */ + GPIO_ACPI_SMI, /* S507 - SOC_KBC_SMI - INT */ + GPIO_NC, /* S508 - NC */ + GPIO_DIRQ, /* S509 - MUX_AUD_INT1# */ + GPIO_OUT_HIGH, /* S510 - WIFI_DISABLE_L */ + GPIO_FUNC0, /* S511 - SUSPWRDNACK */ + GPIO_FUNC0, /* S512 - WIFI_SUSCLK */ + GPIO_FUNC0, /* S513 - SLP_SX */ + GPIO_NC, /* S514 - NC */ + GPIO_FUNC0, /* S515 - WLAN_WAKE_L - INT */ + GPIO_FUNC0, /* S516 - PCH_PWRBTN_L */ + GPIO_NC, /* S517 - NC */ + GPIO_FUNC0, /* S518 - SUS_STAT# */ + GPIO_FUNC0, /* S519 - USB_OC0# */ + GPIO_FUNC0, /* S520 - USB_OC1# */ + GPIO_NC, /* S521 - NC */ + GPIO_NC, /* S522 - XDP_GPIO_DFX0 */ + GPIO_NC, /* S523 - XDP_GPIO_DFX1 */ + GPIO_NC, /* S524 - XDP_GPIO_DFX2 */ + GPIO_NC, /* S525 - XDP_GPIO_DFX3 */ + GPIO_NC, /* S526 - XDP_GPIO_DFX4 */ + GPIO_NC, /* S527 - XDP_GPIO_DFX5 */ + GPIO_NC, /* S528 - XDP_GPIO_DFX6 */ + GPIO_NC, /* S529 - XDP_GPIO_DFX7 */ + GPIO_NC, /* S530 - XDP_GPIO_DFX8 */ + GPIO_NC, /* S531 - NC */ + GPIO_NC, /* S532 - NC */ + GPIO_NC, /* S533 - NC */ + GPIO_NC, /* S534 - NC */ + GPIO_OUT_HIGH, /* S535 - LTE_DISABLE_L */ + GPIO_NC, /* S536 - NC */ + GPIO_INPUT, /* S537 - RAM_ID0 */ + GPIO_INPUT, /* S538 - RAM_ID1 */ + GPIO_INPUT, /* S539 - RAM_ID2 */ + GPIO_INPUT_PD_20K, /* S540 - RAM_ID3 */ + GPIO_NC, /* S541 - NC */ + GPIO_NC, /* S542 - NC */ + GPIO_NC, /* S543 - NC */ + GPIO_END +}; + +static const u8 core_dedicated_irq[GPIO_MAX_DIRQS] = { + [TPAD_IRQ_OFFSET] = TPAD_IRQ_GPIO, + [TOUCH_IRQ_OFFSET] = TOUCH_IRQ_GPIO, + [I8042_IRQ_OFFSET] = I8042_IRQ_GPIO, +}; + +static const u8 sus_dedicated_irq[GPIO_MAX_DIRQS] = { + [CODEC_IRQ_OFFSET] = CODEC_IRQ_GPIO, +}; + +static struct soc_gpio_config gpio_config = { + .ncore = gpncore_gpio_map, + .score = gpscore_gpio_map, + .ssus = gpssus_gpio_map, + .core_dirq = &core_dedicated_irq, + .sus_dirq = &sus_dedicated_irq, +}; + +struct soc_gpio_config* mainboard_get_gpios(void) +{ + return &gpio_config; +} diff --git a/src/mainboard/google/rambi/variants/candy/include/variant/acpi/dptf.asl b/src/mainboard/google/rambi/variants/candy/include/variant/acpi/dptf.asl new file mode 100644 index 0000000..8dd0885 --- /dev/null +++ b/src/mainboard/google/rambi/variants/candy/include/variant/acpi/dptf.asl @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define DPTF_CPU_PASSIVE 85 +#define DPTF_CPU_CRITICAL 100 + +#define DPTF_TSR0_SENSOR_ID 1 +#define DPTF_TSR0_SENSOR_NAME "TMP432_Internal" +#define DPTF_TSR0_PASSIVE 53 +#define DPTF_TSR0_CRITICAL 70 + +#define DPTF_TSR1_SENSOR_ID 2 +#define DPTF_TSR1_SENSOR_NAME "TMP432_Power_top" +#define DPTF_TSR1_PASSIVE 65 +#define DPTF_TSR1_CRITICAL 80 + +#define DPTF_TSR2_SENSOR_ID 3 +#define DPTF_TSR2_SENSOR_NAME "TMP432_CPU_bottom" +#define DPTF_TSR2_PASSIVE 70 +#define DPTF_TSR2_CRITICAL 80 + +#define DPTF_ENABLE_CHARGER + +/* Charger performance states, board-specific values from charger and EC */ +Name (CHPS, Package () { + Package () { 0, 0, 0, 0, 255, 0x6a4, "mA", 0 }, /* 1.7A (MAX) */ + Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 }, /* 1.5A */ + Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 }, /* 1.0A */ + Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 }, /* 0.5A */ + Package () { 0, 0, 0, 0, 0, 0x080, "mA", 0 }, /* 0.128A */ +}) diff --git a/src/mainboard/google/rambi/variants/candy/include/variant/acpi/mainboard.asl b/src/mainboard/google/rambi/variants/candy/include/variant/acpi/mainboard.asl new file mode 100644 index 0000000..33d3209 --- /dev/null +++ b/src/mainboard/google/rambi/variants/candy/include/variant/acpi/mainboard.asl @@ -0,0 +1,19 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Elan trackpad */ +#include <mainboard/google/rambi/acpi/trackpad_elan.asl> + +/* Elan touchscreen */ +#include <mainboard/google/rambi/acpi/touchscreen_elan.asl> diff --git a/src/mainboard/google/rambi/variants/candy/include/variant/onboard.h b/src/mainboard/google/rambi/variants/candy/include/variant/onboard.h new file mode 100644 index 0000000..9a69821 --- /dev/null +++ b/src/mainboard/google/rambi/variants/candy/include/variant/onboard.h @@ -0,0 +1,39 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ONBOARD_H +#define ONBOARD_H + +#include <mainboard/google/rambi/irqroute.h> + +/* PCH wake signal from EC. */ +#define BOARD_PCH_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(0) + +#define BOARD_TRACKPAD_NAME "trackpad" +#define BOARD_TRACKPAD_IRQ GPIO_S0_DED_IRQ(TPAD_IRQ_OFFSET) +#define BOARD_TRACKPAD_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(1) +#define BOARD_TRACKPAD_I2C_BUS 0 +#define BOARD_TRACKPAD_I2C_ADDR 0x15 + +#define BOARD_TOUCHSCREEN_NAME "touchscreen" +#define BOARD_TOUCHSCREEN_IRQ GPIO_S0_DED_IRQ(TOUCH_IRQ_OFFSET) +#define BOARD_TOUCHSCREEN_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(2) +#define BOARD_TOUCHSCREEN_I2C_BUS 5 +#define BOARD_TOUCHSCREEN_I2C_ADDR 0x10 + +#define BOARD_I8042_IRQ GPIO_S0_DED_IRQ(I8042_IRQ_OFFSET) +#define BOARD_CODEC_IRQ GPIO_S5_DED_IRQ(CODEC_IRQ_OFFSET) + +#endif diff --git a/src/mainboard/google/rambi/variants/candy/include/variant/variant.h b/src/mainboard/google/rambi/variants/candy/include/variant/variant.h new file mode 100644 index 0000000..0c58cee --- /dev/null +++ b/src/mainboard/google/rambi/variants/candy/include/variant/variant.h @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef VARIANT_H +#define VARIANT_H + +/* + * RAM_ID[3:0] are on GPIO_SSUS[40:37] + * 0b0000 - 4GiB total - 2 x 2GiB Micron MT41K256M16HA-125:E 1600MHz + * 0b0001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + * 0b0010 - 4GiB total - 2 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz + * 0b0011 - 2GiB total - 1 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz + * 0b0100 - 2GiB total - 1 x 2GiB Micron MT41K256M16HA-125:E 1600MHz + * 0b0101 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + * 0b0110 - 4GiB total - 2 x 2GiB Samsung K4B4G1646E-BYK0 1600MHz + * 0b0111 - 4GiB total - 2 x 2GiB Micron MT41K256M16TW-107 1600MHz + * 0b1000 - 2GiB total - 1 x 2GiB Samsung K4B4G1646E-BYK0 1600MHz + * 0b1001 - 2GiB total - 1 x 2GiB Micron MT41K256M16TW-107 1600MHz + * 0b1010 - 4GiB total - 2 x 2GiB Hynix H5TC4G63CFR-PBA 1600MHz + * 0b1011 - 2GiB total - 1 x 2GiB Hynix H5TC4G63CFR-PBA 1600MHz + */ + +static const uint32_t dual_channel_config = + (1 << 0) | (1 << 1) | (1 << 2) | (1 << 6) | (1 << 7) | (1 << 10); + +#define SPD_SIZE 256 +#define GPIO_SSUS_37_PAD 57 +#define GPIO_SSUS_38_PAD 50 +#define GPIO_SSUS_39_PAD 58 +#define GPIO_SSUS_40_PAD 52 + +#endif diff --git a/src/mainboard/google/rambi/variants/clapper/Makefile.inc b/src/mainboard/google/rambi/variants/clapper/Makefile.inc new file mode 100644 index 0000000..1a01c8a --- /dev/null +++ b/src/mainboard/google/rambi/variants/clapper/Makefile.inc @@ -0,0 +1,45 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2014 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +SPD_BIN = $(obj)/spd.bin + +# Order matters for SPD sources. The following indicies +# define the SPD data to use. +# 0b000 - 4GiB total - 2 x 2GiB Micron MT41K256M16HA-125:E 1600MHz +# 0b001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz +# 0b010 - 2GiB total - 2 x 1GiB Micron MT41K128M16JT-125:K 1600MHz +# 0b011 - 2GiB total - 2 x 1GiB Hynix H5TC2G63FFR-PBA 1600MHz +# 0b100 - 2GiB total - 1 x 2GiB Micron MT41K256M16HA-125:E 1600MHz +# 0b101 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz +SPD_SOURCES = micron_2GiB_dimm_MT41K256M16HA-125 +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += micron_1GiB_dimm_MT41K128M16JT-125 +SPD_SOURCES += hynix_1GiB_dimm_H5TC2G63FFR-PBA +SPD_SOURCES += micron_2GiB_dimm_MT41K256M16HA-125 +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex) + +# Include spd ROM data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/google/rambi/variants/clapper/devicetree.cb b/src/mainboard/google/rambi/variants/clapper/devicetree.cb new file mode 100644 index 0000000..a95ddd1 --- /dev/null +++ b/src/mainboard/google/rambi/variants/clapper/devicetree.cb @@ -0,0 +1,89 @@ +chip soc/intel/baytrail + + # SATA port enable mask (2 ports) + register "sata_port_map" = "0x1" + register "sata_ahci" = "0x1" + register "ide_legacy_combined" = "0x0" + + # Route USB ports to XHCI + register "usb_route_to_xhci" = "1" + + # USB Port Disable Mask + register "usb2_port_disable_mask" = "0x0" + register "usb3_port_disable_mask" = "0x0" + + # USB PHY settings + # TODO: These values are from Baytrail and need tuned for Clapper board + register "usb2_per_port_lane0" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" + register "usb2_per_port_lane1" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" + register "usb2_per_port_lane2" = "0x00049209" + register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" + register "usb2_per_port_lane3" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" + + # LPE audio codec settings + register "lpe_codec_clk_freq" = "25" # 25MHz clock + register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] + + # SD Card controller + register "sdcard_cap_low" = "0x036864b2" + register "sdcard_cap_high" = "0x0" + + # Enable devices in ACPI mode + register "scc_acpi_mode" = "1" + + # Enable PIPEA as DP_C + register "gpu_pipea_port_select" = "2" # DP_C + register "gpu_pipea_power_cycle_delay" = "5" # 400ms + register "gpu_pipea_power_on_delay" = "2000" # 200ms + register "gpu_pipea_light_on_delay" = "10" # 1ms + register "gpu_pipea_power_off_delay" = "500" # 50ms + register "gpu_pipea_light_off_delay" = "2000" # 200ms + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # SoC router + device pci 02.0 on end # GFX + device pci 11.0 off end # SDIO + device pci 12.0 on end # SD + device pci 13.0 on end # SATA + device pci 14.0 on end # XHCI + device pci 15.0 on end # LPE + device pci 17.0 on end # MMC + device pci 18.0 on end # SIO_DMA1 + device pci 18.1 on end # I2C1 + device pci 18.2 on end # I2C2 + device pci 18.3 off end # I2C3 + device pci 18.4 off end # I2C4 + device pci 18.5 on end # I2C5 + device pci 18.6 on end # I2C6 + device pci 18.7 off end # I2C7 + device pci 1a.0 on end # TXE + device pci 1b.0 off end # HDA + device pci 1c.0 on end # PCIE_PORT1 + device pci 1c.1 on end # PCIE_PORT2 + device pci 1c.2 off end # PCIE_PORT3 + device pci 1c.3 off end # PCIE_PORT4 + device pci 1d.0 on end # EHCI + device pci 1e.0 on end # SIO_DMA2 + device pci 1e.1 off end # PWM1 + device pci 1e.2 off end # PWM2 + device pci 1e.3 off end # HSUART1 + device pci 1e.4 off end # HSUART2 + device pci 1e.5 off end # SPI + device pci 1f.0 on + chip ec/google/chromeec + # We only have one init function that + # we need to call to initialize the + # keyboard part of the EC. + device pnp ff.1 on # dummy address + end + end + end # LPC Bridge + device pci 1f.3 off end # SMBus + end +end diff --git a/src/mainboard/google/rambi/variants/clapper/gpio.c b/src/mainboard/google/rambi/variants/clapper/gpio.c new file mode 100644 index 0000000..385b406 --- /dev/null +++ b/src/mainboard/google/rambi/variants/clapper/gpio.c @@ -0,0 +1,230 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdlib.h> +#include <soc/gpio.h> +#include <mainboard/google/rambi/irqroute.h> + +/* NCORE GPIOs */ +static const struct soc_gpio_map gpncore_gpio_map[] = { + GPIO_FUNC2, /* S0_NC00 - INT_HDMI_HPD - INT */ + GPIO_FUNC2, /* S0_NC01 - HDMI_DDCDATA_SW */ + GPIO_FUNC2, /* S0_NC02 - HDMI_DDCCLK_SW */ + GPIO_NC, /* S0_NC03 - NC */ + GPIO_NC, /* S0_NC04 - NC */ + GPIO_NC, /* S0_NC05 - NC */ + GPIO_FUNC2, /* S0_NC06 - EDP_HPD_L */ + GPIO_INPUT, /* S0_NC07 - DDI1_DDCDATA - STRAP */ + GPIO_NC, /* S0_NC08 - NC */ + GPIO_FUNC2, /* S0_NC09 - SOC_DISP_ON_C */ + GPIO_FUNC2, /* S0_NC10 - SOC_EDP_BLON_C */ + GPIO_FUNC2, /* S0_NC11 - SOC_DPST_PWM_C */ + GPIO_NC, /* S0_NC12 - NC */ + GPIO_INPUT, /* S0_NC13 - GPIO_NC13 - STRAP */ + GPIO_NC, /* S0_NC14 - NC */ + GPIO_DEFAULT, /* S0_NC15 - XDP_GPIO_S0_NC15 */ + GPIO_DEFAULT, /* S0_NC16 - XDP_GPIO_S0_NC16 */ + GPIO_DEFAULT, /* S0_NC17 - XDP_GPIO_S0_NC17 */ + GPIO_DEFAULT, /* S0_NC18 - XDP_GPIO_S0_NC18 */ + GPIO_DEFAULT, /* S0_NC19 - XDP_GPIO_S0_NC19 */ + GPIO_DEFAULT, /* S0_NC20 - XDP_GPIO_S0_NC20 */ + GPIO_DEFAULT, /* S0_NC21 - XDP_GPIO_S0_NC21 */ + GPIO_DEFAULT, /* S0_NC22 - XDP_GPIO_S0_NC22 */ + GPIO_DEFAULT, /* S0_NC23 - XDP_GPIO_S0_NC23 */ + GPIO_NC, /* S0_NC24 - NC */ + GPIO_NC, /* S0_NC25 - NC */ + GPIO_NC, /* S0_NC26 - NC */ + GPIO_END +}; + +/* SCORE GPIOs */ +static const struct soc_gpio_map gpscore_gpio_map[] = { + GPIO_ACPI_SCI, /* S0_SC000 - SOC_KBC_SCI - INT */ + GPIO_FUNC2, /* S0_SC001 - SATA_DEVSLP_C */ + GPIO_NC, /* S0-SC002 - SATA_LED_R_N (NC/PU) */ + GPIO_FUNC1, /* S0-SC003 - PCIE_CLKREQ_IMAGE# */ + GPIO_FUNC1, /* S0-SC004 - PCIE_CLKREQ_WLAN# */ + GPIO_NC, /* S0-SC005 - PCIE_CLKREQ_LAN# (NC) */ + GPIO_NC, /* S0-SC006 - PCIE_CLKREQ3# (NC) */ + GPIO_FUNC(2, PULL_DISABLE, 10K), /* S0-SC007 - SD3_WP external pull */ + GPIO_NC, /* S0-SC008 - ACZ_RST# (NC) */ + GPIO_NC, /* S0-SC009 - ACZ_SYNC (NC) */ + GPIO_NC, /* S0-SC010 - ACZ_BCLK (NC) */ + GPIO_NC, /* S0-SC011 - ACZ_STDOUT (NC) */ + GPIO_NC, /* S0-SC012 - PCH_AZ_CODEC_SDIN0 (NC) */ + GPIO_NC, /* S0-SC013 - NC */ + GPIO_INPUT, /* S0-SC014 - DET_TRIGGER - INT */ + GPIO_INPUT, /* S0-SC015 - AJACK_MICPRES_L - INT */ + GPIO_FUNC(3, PULL_DOWN, 20K), /* S0-SC016 - MMC1_45_CLK */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC017 - MMC1_45_D[0] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC018 - MMC1_45_D[1] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC019 - MMC1_45_D[2] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC020 - MMC1_45_D[3] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC021 - MMC1_45_D[4] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC022 - MMC1_45_D[5] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC023 - MMC1_45_D[6] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC024 - MMC1_45_D[7] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC025 - MMC1_45_CMD */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC026 - MMC1_45_RST */ + GPIO_NC, /* S0-SC027 - NC */ + GPIO_NC, /* S0-SC028 - NC */ + GPIO_NC, /* S0-SC029 - NC */ + GPIO_NC, /* S0-SC030 - NC */ + GPIO_NC, /* S0-SC031 - NC */ + GPIO_NC, /* S0-SC032 - NC */ + GPIO_FUNC(1, PULL_DOWN, 20K), /* S0-SC033 - SD3_CLK */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC034 - SD3_D0 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC035 - SD3_D1 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC036 - SD3_D2 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC037 - SD3_D3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC038 - SD3_CD# */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC039 - SD3_CMD */ + GPIO_NC, /* S0-SC040 - SDMMC3_1P8_EN - TP3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC041 - SDIO3_PWR_EN# */ + GPIO_FUNC1, /* S0-SC042 - LPC_LAD0 */ + GPIO_FUNC1, /* S0-SC043 - LPC-LAD1 */ + GPIO_FUNC1, /* S0-SC044 - LPC_LAD2 */ + GPIO_FUNC1, /* S0-SC045 - LPC_LAD3 */ + GPIO_FUNC1, /* S0-SC046 - LPC_LFRAME# */ + GPIO_FUNC1, /* S0-SC047 - PCLK_TPM */ + GPIO_FUNC1, /* S0-SC048 - CLK_PCI_EC */ + GPIO_FUNC1, /* S0-SC049 - LPC_CLKRUN_L */ + GPIO_NC, /* S0-SC050 - IRQ_SERIRQ */ + GPIO_NC, /* S0-SC051 - SMB_SOC_DATA (XDP) */ + GPIO_NC, /* S0-SC052 - SMB_SOC_CLK (XDP) */ + GPIO_NC, /* S0-SC053 - SMB_SOC_ALERTB (NC) */ + GPIO_DEFAULT, /* S0-SC054 - NC */ + GPIO_DIRQ, /* S0-SC055 - TRACKPAD_INT_DX */ + GPIO_INPUT, /* S0-SC056 - GPIO_S0_SC_56 - STRAP */ + GPIO_FUNC1, /* S0-SC057 - PCH_UART_TXD */ + GPIO_INPUT, /* S0-SC058 - SIM_DET_C */ + GPIO_INPUT_LEGACY, /* S0-SC059 - EC_IN_RW_C */ + GPIO_NC, /* S0-SC060 - NC */ + GPIO_FUNC1, /* S0-SC061 - SOC_UART_RX */ + GPIO_FUNC1, /* S0-SC062 - I2S_BCLK */ + GPIO_FUNC1, /* S0-SC063 - I2S_LRCLK */ + GPIO_FUNC1, /* S0-SC064 - I2S_DIN */ + GPIO_FUNC1, /* S0-SC065 - I2S_DOUT */ + GPIO_FUNC1, /* S0-SC066 - SIO_SPI_CS# */ + GPIO_FUNC1, /* S0-SC067 - SIO_SPI_MISO */ + GPIO_FUNC1, /* S0-SC068 - SIO_SPI_MOSI */ + GPIO_FUNC1, /* S0-SC069 - SIO_SPI_CLK */ + GPIO_INPUT, /* S0-SC070 - ALS_INT_L - INT */ + GPIO_NC, /* S0-SC071 - NC */ + GPIO_DIRQ, /* S0-SC072 - TOUCH_INT_L_DX */ + GPIO_NC, /* S0-SC073 - NC */ + GPIO_NC, /* S0-SC074 - SIO_UART2_RXD (NC) */ + GPIO_NC, /* S0-SC075 - SIO_UART2_TXD (NC) */ + GPIO_INPUT, /* S0-SC076 - BIOS_STRAP - STRAP */ + GPIO_INPUT, /* S0-SC077 - SOC_OVERRIDE - STRAP */ + GPIO_FUNC1, /* S0-SC078 - I2C_0_SDA */ + GPIO_FUNC1, /* S0-SC079 - I2C_0_SCL */ + GPIO_FUNC1, /* S0-SC080 - I2C_1_SDA */ + GPIO_FUNC1, /* S0-SC081 - I2C_1_SCL */ + GPIO_NC, /* S0-SC082 - NC */ + GPIO_NC, /* S0-SC083 - NC */ + GPIO_NC, /* S0-SC084 - NC */ + GPIO_NC, /* S0-SC085 - NC */ + GPIO_FUNC1, /* S0-SC086 - I2C_4_SDA */ + GPIO_FUNC1, /* S0-SC087 - I2C_4_SCL */ + GPIO_FUNC1, /* S0-SC088 - I2C_5_SDA */ + GPIO_FUNC1, /* S0-SC089 - I2C_5_SCL */ + GPIO_NC, /* S0-SC090 - NC */ + GPIO_NC, /* S0-SC091 - NC */ + GPIO_NC, /* S0-SC092 - I2C_NGFF_SDA (NC/PU) */ + GPIO_NC, /* S0-SC093 - I2C_NGFF_SCL (NC/PU) */ + GPIO_NC, /* S0-SC094 - NC */ + GPIO_NC, /* S0-SC095 - SIO_PWM1 (NC) */ + GPIO_FUNC1, /* S0-SC096 - I2S_MCLK */ + GPIO_NC, /* S0-SC097 - NC */ + GPIO_NC, /* S0-SC098 - NC */ + GPIO_NC, /* S0-SC099 - NC */ + GPIO_NC, /* S0-SC100 - NC */ + GPIO_DIRQ, /* S0-SC101 - KBD_IRQ# */ + GPIO_END +}; + +/* SSUS GPIOs */ +static const struct soc_gpio_map gpssus_gpio_map[] = { + GPIO_ACPI_SCI, /* S500 - PCH_WAKE# */ + GPIO_FUNC6, /* S501 - TRACKPAD_INT# - INT */ + GPIO_FUNC6, /* S502 - TOUCH_INT# - INT */ + GPIO_FUNC6, /* S503 - LTE_WAKE_L# - INT */ + GPIO_NC, /* S504 - SOC_JTAG2_TDO (NC/PU) */ + GPIO_FUNC1, /* S505 - SUS_CLK_WLAN (NC) */ + GPIO_INPUT_PU, /* S506 - PCH_SPI_WP */ + GPIO_ACPI_SMI, /* S507 - SOC_KBC_SMI - INT */ + GPIO_NC, /* S508 - NC */ + GPIO_NC, /* S509 - MUX_AUD_INT1# (NC) */ + GPIO_OUT_HIGH, /* S510 - WIFI_DISABLE_L */ + GPIO_FUNC0, /* S511 - SUSPWRDNACK */ + GPIO_FUNC0, /* S512 - WIFI_SUSCLK */ + GPIO_FUNC0, /* S513 - SLP_SX */ + GPIO_NC, /* S514 - NC */ + GPIO_FUNC0, /* S515 - WLAN_WAKE_L - INT */ + GPIO_FUNC0, /* S516 - PCH_PWRBTN_L */ + GPIO_NC, /* S517 - NC */ + GPIO_FUNC0, /* S518 - SUS_STAT# */ + GPIO_FUNC0, /* S519 - USB_OC0# */ + GPIO_FUNC0, /* S520 - USB_OC1# */ + GPIO_NC, /* S521 - NC */ + GPIO_NC, /* S522 - XDP_GPIO_DFX0 */ + GPIO_NC, /* S523 - XDP_GPIO_DFX1 */ + GPIO_NC, /* S524 - XDP_GPIO_DFX2 */ + GPIO_NC, /* S525 - XDP_GPIO_DFX3 */ + GPIO_NC, /* S526 - XDP_GPIO_DFX4 */ + GPIO_NC, /* S527 - XDP_GPIO_DFX5 */ + GPIO_NC, /* S528 - XDP_GPIO_DFX6 */ + GPIO_NC, /* S529 - XDP_GPIO_DFX7 */ + GPIO_NC, /* S530 - XDP_GPIO_DFX8 */ + GPIO_NC, /* S531 - NC */ + GPIO_NC, /* S532 - NC */ + GPIO_NC, /* S533 - NC */ + GPIO_NC, /* S534 - NC */ + GPIO_OUT_HIGH, /* S535 - LTE_DISABLE_L */ + GPIO_NC, /* S536 - NC */ + GPIO_FUNC0, /* S537 - RAM_ID0 */ + GPIO_FUNC0, /* S538 - RAM_ID1 */ + GPIO_FUNC0, /* S539 - RAM_ID2 */ + GPIO_NC, /* S540 - NC */ + GPIO_NC, /* S541 - NC */ + GPIO_NC, /* S542 - NC */ + GPIO_NC, /* S543 - NC */ + GPIO_END +}; + +static const u8 core_dedicated_irq[GPIO_MAX_DIRQS] = { + [TPAD_IRQ_OFFSET] = TPAD_IRQ_GPIO, + [TOUCH_IRQ_OFFSET] = TOUCH_IRQ_GPIO, + [I8042_IRQ_OFFSET] = I8042_IRQ_GPIO, +}; + + +static const u8 sus_dedicated_irq[GPIO_MAX_DIRQS] = { + [CODEC_IRQ_OFFSET] = CODEC_IRQ_GPIO, +}; + +static struct soc_gpio_config gpio_config = { + .ncore = gpncore_gpio_map, + .score = gpscore_gpio_map, + .ssus = gpssus_gpio_map, + .core_dirq = &core_dedicated_irq, + .sus_dirq = &sus_dedicated_irq, +}; + +struct soc_gpio_config* mainboard_get_gpios(void) +{ + return &gpio_config; +} diff --git a/src/mainboard/google/rambi/variants/clapper/include/variant/acpi/dptf.asl b/src/mainboard/google/rambi/variants/clapper/include/variant/acpi/dptf.asl new file mode 100644 index 0000000..53dd09c --- /dev/null +++ b/src/mainboard/google/rambi/variants/clapper/include/variant/acpi/dptf.asl @@ -0,0 +1,29 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define DPTF_TSR0_SENSOR_ID 1 +#define DPTF_TSR0_SENSOR_NAME "TMP432_Internal" +#define DPTF_TSR0_PASSIVE 40 +#define DPTF_TSR0_CRITICAL 70 + +#define DPTF_TSR1_SENSOR_ID 2 +#define DPTF_TSR1_SENSOR_NAME "TMP432_Power_top" +#define DPTF_TSR1_PASSIVE 45 +#define DPTF_TSR1_CRITICAL 70 + +#define DPTF_TSR2_SENSOR_ID 3 +#define DPTF_TSR2_SENSOR_NAME "TMP432_CPU_bottom" +#define DPTF_TSR2_PASSIVE 35 +#define DPTF_TSR2_CRITICAL 70 + +#undef DPTF_ENABLE_CHARGER diff --git a/src/mainboard/google/rambi/variants/clapper/include/variant/acpi/mainboard.asl b/src/mainboard/google/rambi/variants/clapper/include/variant/acpi/mainboard.asl new file mode 100644 index 0000000..82510bd --- /dev/null +++ b/src/mainboard/google/rambi/variants/clapper/include/variant/acpi/mainboard.asl @@ -0,0 +1,19 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Elan trackpad */ +#include <mainboard/google/rambi/acpi/trackpad_elan.asl> + +/* Atmel touchscreen */ +#include <mainboard/google/rambi/acpi/touchscreen_atmel.asl> diff --git a/src/mainboard/google/rambi/variants/clapper/include/variant/onboard.h b/src/mainboard/google/rambi/variants/clapper/include/variant/onboard.h new file mode 100644 index 0000000..016f657 --- /dev/null +++ b/src/mainboard/google/rambi/variants/clapper/include/variant/onboard.h @@ -0,0 +1,39 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ONBOARD_H +#define ONBOARD_H + +#include <mainboard/google/rambi/irqroute.h> + +/* PCH wake signal from EC. */ +#define BOARD_PCH_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(0) + +#define BOARD_TRACKPAD_NAME "trackpad" +#define BOARD_TRACKPAD_IRQ GPIO_S0_DED_IRQ(TPAD_IRQ_OFFSET) +#define BOARD_TRACKPAD_WAKE_GPIO 1 /* GPSSUS1 */ +#define BOARD_TRACKPAD_I2C_BUS 0 +#define BOARD_TRACKPAD_I2C_ADDR 0x15 + +#define BOARD_TOUCHSCREEN_NAME "touchscreen" +#define BOARD_TOUCHSCREEN_IRQ GPIO_S0_DED_IRQ(TOUCH_IRQ_OFFSET) +#define BOARD_TOUCHSCREEN_WAKE_GPIO 2 /* GPSSUS2 */ +#define BOARD_TOUCHSCREEN_I2C_BUS 5 +#define BOARD_TOUCHSCREEN_I2C_ADDR 0x4a + +#define BOARD_I8042_IRQ GPIO_S0_DED_IRQ(I8042_IRQ_OFFSET) +#define BOARD_CODEC_IRQ GPIO_S5_DED_IRQ(CODEC_IRQ_OFFSET) + +#endif diff --git a/src/mainboard/google/rambi/variants/clapper/include/variant/variant.h b/src/mainboard/google/rambi/variants/clapper/include/variant/variant.h new file mode 100644 index 0000000..38b156c --- /dev/null +++ b/src/mainboard/google/rambi/variants/clapper/include/variant/variant.h @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef VARIANT_H +#define VARIANT_H + +/* + * RAM_ID[2:0] are on GPIO_SSUS[39:37] + * 0b000 - 4GiB total - 2 x 2GiB Micron MT41K256M16HA-125:E 1600MHz + * 0b001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + * 0b010 - 2GiB total - 2 x 1GiB Micron MT41K128M16JT-125:K 1600MHz + * 0b011 - 2GiB total - 2 x 1GiB Hynix H5TC2G63FFR-PBA 1600MHz + * 0b100 - 2GiB total - 1 x 2GiB Micron MT41K256M16HA-125:E 1600MHz + * 0b101 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + */ + +static const uint32_t dual_channel_config = + (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3); + +#define SPD_SIZE 256 +#define GPIO_SSUS_37_PAD 57 +#define GPIO_SSUS_38_PAD 50 +#define GPIO_SSUS_39_PAD 58 + +#endif diff --git a/src/mainboard/google/rambi/variants/enguarde/include/variant/acpi/mainboard.asl b/src/mainboard/google/rambi/variants/enguarde/include/variant/acpi/mainboard.asl index 772b4ba..3cdd5c0 100644 --- a/src/mainboard/google/rambi/variants/enguarde/include/variant/acpi/mainboard.asl +++ b/src/mainboard/google/rambi/variants/enguarde/include/variant/acpi/mainboard.asl @@ -12,7 +12,5 @@ * GNU General Public License for more details. */ -#include <variant/onboard.h> - /* Elan trackpad */ #include <mainboard/google/rambi/acpi/trackpad_elan.asl> diff --git a/src/mainboard/google/rambi/variants/enguarde/include/variant/onboard.h b/src/mainboard/google/rambi/variants/enguarde/include/variant/onboard.h index 1477794..2a1045d 100644 --- a/src/mainboard/google/rambi/variants/enguarde/include/variant/onboard.h +++ b/src/mainboard/google/rambi/variants/enguarde/include/variant/onboard.h @@ -31,6 +31,4 @@ #define BOARD_CODEC_IRQ GPIO_S5_DED_IRQ(CODEC_IRQ_OFFSET) #define BOARD_ALS_IRQ GPIO_S0_DED_IRQ(ALS_IRQ_OFFSET) -#define BOARD_ALS_I2C_ADDR 0x44 - #endif diff --git a/src/mainboard/google/rambi/variants/glimmer/Makefile.inc b/src/mainboard/google/rambi/variants/glimmer/Makefile.inc new file mode 100644 index 0000000..341f6d3 --- /dev/null +++ b/src/mainboard/google/rambi/variants/glimmer/Makefile.inc @@ -0,0 +1,55 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2014 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +SPD_BIN = $(obj)/spd.bin + +# Order matters for SPD sources. The following indicies +# define the SPD data to use. +# 0b0000 - 4GiB total - 2 x 2GiB Micron MT41K256M16HA-125:E 1600MHz +# 0b0001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz +# 0b0010 - 2GiB total - 2 x 1GiB Micron MT41K128M16JT-125:K 1600MHz +# 0b0011 - 2GiB total - 2 x 1GiB Hynix H5TC2G63FFR-PBA 1600MHz +# 0b0100 - 2GiB total - 2 x 1GiB Samsung K4B2G1646Q-BYK0 1600MHz +# 0b0101 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz +# 0b0110 - 4GiB total - 2 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz +# 0b0111 - 4GiB total - 2 x 2GiB Elpida EDJ4216EFBG-GNL-F 1600MHz +# 0b1000 - 2GiB total - 1 x 2GiB Micron MT41K256M16HA-125:E 1600MHz +# 0b1001 - 2GiB total - 1 x 2GiB Elpida EDJ4216EFBG-GNL-F 1600MHz +# 0b1010 - 2GiB total - 1 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz +SPD_SOURCES = micron_2GiB_dimm_MT41K256M16HA-125 +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += micron_1GiB_dimm_MT41K128M16JT-125 +SPD_SOURCES += hynix_1GiB_dimm_H5TC2G63FFR-PBA +SPD_SOURCES += samsung_1GiB_dimm_K4B2G1646Q-BYK0 +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += samsung_2GiB_dimm_K4B4G1646Q-HYK0 +SPD_SOURCES += elpida_2GiB_dimm_EDJ4216EFBG-GNL-F +SPD_SOURCES += micron_2GiB_dimm_MT41K256M16HA-125 +SPD_SOURCES += elpida_2GiB_dimm_EDJ4216EFBG-GNL-F +SPD_SOURCES += samsung_2GiB_dimm_K4B4G1646Q-HYK0 + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex) + +# Include spd rom data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/google/rambi/variants/glimmer/devicetree.cb b/src/mainboard/google/rambi/variants/glimmer/devicetree.cb new file mode 100644 index 0000000..bf01cd9 --- /dev/null +++ b/src/mainboard/google/rambi/variants/glimmer/devicetree.cb @@ -0,0 +1,98 @@ +chip soc/intel/baytrail + + # SATA port enable mask (2 ports) + register "sata_port_map" = "0x1" + register "sata_ahci" = "0x1" + register "ide_legacy_combined" = "0x0" + + # Route USB ports to XHCI + register "usb_route_to_xhci" = "1" + + # USB Port Disable Mask + register "usb2_port_disable_mask" = "0x0" + register "usb3_port_disable_mask" = "0x0" + + # USB PHY settings + # TODO: These values are from Baytrail and need tuned for Glimmer board + register "usb2_per_port_lane0" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" + register "usb2_per_port_lane1" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" + register "usb2_per_port_lane2" = "0x00049209" + register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" + register "usb2_per_port_lane3" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" + + # LPE audio codec settings + register "lpe_codec_clk_freq" = "25" # 25MHz clock + register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] + + # SD Card controller + register "sdcard_cap_low" = "0x036864b2" + register "sdcard_cap_high" = "0x0" + + # Enable devices in ACPI mode + register "lpe_acpi_mode" = "1" + register "lpss_acpi_mode" = "1" + register "scc_acpi_mode" = "1" + + # Enable PIPEA as DP_C + register "gpu_pipea_port_select" = "2" # DP_C + register "gpu_pipea_power_cycle_delay" = "6" # 600ms + register "gpu_pipea_power_on_delay" = "5000" # 500ms + register "gpu_pipea_light_on_delay" = "70" # 7ms + register "gpu_pipea_power_off_delay" = "500" # 50ms + register "gpu_pipea_light_off_delay" = "2000" # 200ms + + # VR PS2 control + register "vnn_ps2_enable" = "1" + register "vcc_ps2_enable" = "1" + + # Disable SLP_X stretching after SUS power well fail. + register "disable_slp_x_stretch_sus_fail" = "1" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # SoC router + device pci 02.0 on end # GFX + device pci 11.0 off end # SDIO + device pci 12.0 on end # SD + device pci 13.0 on end # SATA + device pci 14.0 on end # XHCI + device pci 15.0 on end # LPE + device pci 17.0 on end # MMC + device pci 18.0 on end # SIO_DMA1 + device pci 18.1 on end # I2C1 + device pci 18.2 on end # I2C2 + device pci 18.3 off end # I2C3 + device pci 18.4 off end # I2C4 + device pci 18.5 on end # I2C5 + device pci 18.6 on end # I2C6 + device pci 18.7 off end # I2C7 + device pci 1a.0 on end # TXE + device pci 1b.0 on end # HDA + device pci 1c.0 on end # PCIE_PORT1 + device pci 1c.1 on end # PCIE_PORT2 + device pci 1c.2 off end # PCIE_PORT3 + device pci 1c.3 off end # PCIE_PORT4 + device pci 1d.0 on end # EHCI + device pci 1e.0 on end # SIO_DMA2 + device pci 1e.1 off end # PWM1 + device pci 1e.2 off end # PWM2 + device pci 1e.3 off end # HSUART1 + device pci 1e.4 off end # HSUART2 + device pci 1e.5 off end # SPI + device pci 1f.0 on + chip ec/google/chromeec + # We only have one init function that + # we need to call to initialize the + # keyboard part of the EC. + device pnp ff.1 on # dummy address + end + end + end # LPC Bridge + device pci 1f.3 off end # SMBus + end +end diff --git a/src/mainboard/google/rambi/variants/glimmer/gpio.c b/src/mainboard/google/rambi/variants/glimmer/gpio.c new file mode 100644 index 0000000..8cfe90e --- /dev/null +++ b/src/mainboard/google/rambi/variants/glimmer/gpio.c @@ -0,0 +1,231 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdlib.h> +#include <soc/gpio.h> +#include <mainboard/google/rambi/irqroute.h> + +/* NCORE GPIOs */ +static const struct soc_gpio_map gpncore_gpio_map[] = { + GPIO_FUNC2, /* S0_NC00 - INT_HDMI_HPD - INT */ + GPIO_FUNC2, /* S0_NC01 - HDMI_DDCDATA_SW */ + GPIO_FUNC2, /* S0_NC02 - HDMI_DDCCLK_SW */ + GPIO_NC, /* S0_NC03 - NC */ + GPIO_NC, /* S0_NC04 - NC */ + GPIO_NC, /* S0_NC05 - NC */ + GPIO_FUNC2, /* S0_NC06 - EDP_HPD_L */ + GPIO_INPUT, /* S0_NC07 - DDI1_DDCDATA - STRAP */ + GPIO_NC, /* S0_NC08 - NC */ + GPIO_OUT_HIGH, /* S0_NC09 - SOC_DISP_ON_C */ + GPIO_FUNC2, /* S0_NC10 - SOC_EDP_BLON_C */ + GPIO_FUNC2, /* S0_NC11 - SOC_DPST_PWM_C */ + GPIO_NC, /* S0_NC12 - NC */ + GPIO_INPUT, /* S0_NC13 - GPIO_NC13 - STRAP */ + GPIO_NC, /* S0_NC14 - NC */ + GPIO_DEFAULT, /* S0_NC15 - XDP_GPIO_S0_NC15 */ + GPIO_DEFAULT, /* S0_NC16 - XDP_GPIO_S0_NC16 */ + GPIO_DEFAULT, /* S0_NC17 - XDP_GPIO_S0_NC17 */ + GPIO_DEFAULT, /* S0_NC18 - XDP_GPIO_S0_NC18 */ + GPIO_DEFAULT, /* S0_NC19 - XDP_GPIO_S0_NC19 */ + GPIO_DEFAULT, /* S0_NC20 - XDP_GPIO_S0_NC20 */ + GPIO_DEFAULT, /* S0_NC21 - XDP_GPIO_S0_NC21 */ + GPIO_DEFAULT, /* S0_NC22 - XDP_GPIO_S0_NC22 */ + GPIO_DEFAULT, /* S0_NC23 - XDP_GPIO_S0_NC23 */ + GPIO_NC, /* S0_NC24 - NC */ + GPIO_NC, /* S0_NC25 - NC */ + GPIO_NC, /* S0_NC26 - NC */ + GPIO_END +}; + +/* SCORE GPIOs */ +static const struct soc_gpio_map gpscore_gpio_map[] = { + GPIO_ACPI_SCI, /* S0_SC000 - SOC_KBC_SCI - INT */ + GPIO_FUNC2, /* S0_SC001 - SATA_DEVSLP_C */ + GPIO_NC, /* S0-SC002 - SATA_LED_R_N (NC/PU) */ + GPIO_FUNC1, /* S0-SC003 - PCIE_CLKREQ_IMAGE# */ + GPIO_FUNC1, /* S0-SC004 - PCIE_CLKREQ_WLAN# */ + GPIO_NC, /* S0-SC005 - PCIE_CLKREQ_LAN# (NC) */ + GPIO_NC, /* S0-SC006 - PCIE_CLKREQ3# (NC) */ + GPIO_FUNC(2, PULL_DISABLE, 10K), /* S0-SC007 - SD3_WP external pull */ + GPIO_NC, /* S0-SC008 - ACZ_RST# (NC) */ + GPIO_NC, /* S0-SC009 - ACZ_SYNC (NC) */ + GPIO_NC, /* S0-SC010 - ACZ_BCLK (NC) */ + GPIO_NC, /* S0-SC011 - ACZ_STDOUT (NC) */ + GPIO_NC, /* S0-SC012 - PCH_AZ_CODEC_SDIN0 (NC) */ + GPIO_NC, /* S0-SC013 - NC */ + GPIO_INPUT, /* S0-SC014 - DET_TRIGGER - INT */ + GPIO_INPUT, /* S0-SC015 - AJACK_MICPRES_L - INT */ + GPIO_FUNC(3, PULL_DOWN, 20K), /* S0-SC016 - MMC1_45_CLK */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC017 - MMC1_45_D[0] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC018 - MMC1_45_D[1] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC019 - MMC1_45_D[2] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC020 - MMC1_45_D[3] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC021 - MMC1_45_D[4] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC022 - MMC1_45_D[5] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC023 - MMC1_45_D[6] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC024 - MMC1_45_D[7] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC025 - MMC1_45_CMD */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC026 - MMC1_45_RST */ + GPIO_NC, /* S0-SC027 - NC */ + GPIO_NC, /* S0-SC028 - NC */ + GPIO_NC, /* S0-SC029 - NC */ + GPIO_NC, /* S0-SC030 - NC */ + GPIO_NC, /* S0-SC031 - NC */ + GPIO_NC, /* S0-SC032 - NC */ + GPIO_FUNC(1, PULL_DOWN, 20K), /* S0-SC033 - SD3_CLK */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC034 - SD3_D0 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC035 - SD3_D1 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC036 - SD3_D2 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC037 - SD3_D3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC038 - SD3_CD# */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC039 - SD3_CMD */ + GPIO_NC, /* S0-SC040 - SDMMC3_1P8_EN - TP3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC041 - SDIO3_PWR_EN# */ + GPIO_FUNC1, /* S0-SC042 - LPC_LAD0 */ + GPIO_FUNC1, /* S0-SC043 - LPC-LAD1 */ + GPIO_FUNC1, /* S0-SC044 - LPC_LAD2 */ + GPIO_FUNC1, /* S0-SC045 - LPC_LAD3 */ + GPIO_FUNC1, /* S0-SC046 - LPC_LFRAME# */ + GPIO_FUNC1, /* S0-SC047 - PCLK_TPM */ + GPIO_FUNC1, /* S0-SC048 - CLK_PCI_EC */ + GPIO_FUNC1, /* S0-SC049 - LPC_CLKRUN_L */ + GPIO_NC, /* S0-SC050 - IRQ_SERIRQ */ + GPIO_NC, /* S0-SC051 - SMB_SOC_DATA (XDP) */ + GPIO_NC, /* S0-SC052 - SMB_SOC_CLK (XDP) */ + GPIO_NC, /* S0-SC053 - SMB_SOC_ALERTB (NC) */ + GPIO_DEFAULT, /* S0-SC054 - NC */ + GPIO_DIRQ, /* S0-SC055 - TRACKPAD_INT_DX */ + GPIO_INPUT, /* S0-SC056 - GPIO_S0_SC_56 - STRAP */ + GPIO_FUNC1, /* S0-SC057 - PCH_UART_TXD */ + GPIO_INPUT, /* S0-SC058 - SIM_DET_C */ + GPIO_INPUT_LEGACY, /* S0-SC059 - EC_IN_RW_C */ + GPIO_NC, /* S0-SC060 - NC */ + GPIO_FUNC1, /* S0-SC061 - SOC_UART_RX */ + GPIO_FUNC1, /* S0-SC062 - I2S_BCLK */ + GPIO_FUNC1, /* S0-SC063 - I2S_LRCLK */ + GPIO_FUNC1, /* S0-SC064 - I2S_DIN */ + GPIO_FUNC1, /* S0-SC065 - I2S_DOUT */ + GPIO_FUNC1, /* S0-SC066 - SIO_SPI_CS# */ + GPIO_FUNC1, /* S0-SC067 - SIO_SPI_MISO */ + GPIO_FUNC1, /* S0-SC068 - SIO_SPI_MOSI */ + GPIO_FUNC1, /* S0-SC069 - SIO_SPI_CLK */ + GPIO_NC, /* S0-SC070 - ALS_INT_L - INT (NC) */ + GPIO_NC, /* S0-SC071 - NC */ + GPIO_DIRQ, /* S0-SC072 - TOUCH_INT_L_DX */ + GPIO_NC, /* S0-SC073 - NC */ + GPIO_NC, /* S0-SC074 - SIO_UART2_RXD (NC) */ + GPIO_NC, /* S0-SC075 - SIO_UART2_TXD (NC) */ + GPIO_INPUT, /* S0-SC076 - BIOS_STRAP - STRAP */ + GPIO_INPUT, /* S0-SC077 - SOC_OVERRIDE - STRAP */ + GPIO_FUNC1, /* S0-SC078 - I2C_0_SDA */ + GPIO_FUNC1, /* S0-SC079 - I2C_0_SCL */ + GPIO_FUNC1, /* S0-SC080 - I2C_1_SDA */ + GPIO_FUNC1, /* S0-SC081 - I2C_1_SCL */ + GPIO_NC, /* S0-SC082 - NC */ + GPIO_NC, /* S0-SC083 - NC */ + GPIO_NC, /* S0-SC084 - NC */ + GPIO_NC, /* S0-SC085 - NC */ + GPIO_FUNC1, /* S0-SC086 - I2C_4_SDA */ + GPIO_FUNC1, /* S0-SC087 - I2C_4_SCL */ + GPIO_FUNC1, /* S0-SC088 - I2C_5_SDA */ + GPIO_FUNC1, /* S0-SC089 - I2C_5_SCL */ + GPIO_NC, /* S0-SC090 - NC */ + GPIO_NC, /* S0-SC091 - NC */ + GPIO_NC, /* S0-SC092 - I2C_NGFF_SDA (NC/PU) */ + GPIO_NC, /* S0-SC093 - I2C_NGFF_SCL (NC/PU) */ + GPIO_NC, /* S0-SC094 - NC */ + GPIO_NC, /* S0-SC095 - SIO_PWM1 (NC) */ + GPIO_FUNC1, /* S0-SC096 - I2S_MCLK */ + GPIO_NC, /* S0-SC097 - NC */ + GPIO_NC, /* S0-SC098 - NC */ + GPIO_NC, /* S0-SC099 - NC */ + GPIO_NC, /* S0-SC100 - NC */ + GPIO_DIRQ, /* S0-SC101 - KBD_IRQ# */ + GPIO_END +}; + +/* SSUS GPIOs */ +static const struct soc_gpio_map gpssus_gpio_map[] = { + GPIO_ACPI_WAKE, /* S500 - PCH_WAKE# */ + GPIO_ACPI_WAKE, /* S501 - TRACKPAD_INT# - INT */ + GPIO_ACPI_WAKE, /* S502 - TOUCH_INT# - INT */ + GPIO_FUNC6, /* S503 - LTE_WAKE_L# - INT */ + GPIO_NC, /* S504 - SOC_JTAG2_TDO (NC/PU) */ + GPIO_FUNC1, /* S505 - SUS_CLK_WLAN (NC) */ + GPIO_INPUT_PU, /* S506 - PCH_SPI_WP */ + GPIO_ACPI_SMI, /* S507 - SOC_KBC_SMI - INT */ + GPIO_NC, /* S508 - NC */ + GPIO_DIRQ, /* S509 - MUX_AUD_INT1# */ + GPIO_OUT_HIGH, /* S510 - WIFI_DISABLE_L */ + GPIO_FUNC0, /* S511 - SUSPWRDNACK */ + GPIO_FUNC0, /* S512 - WIFI_SUSCLK */ + GPIO_FUNC0, /* S513 - SLP_SX */ + GPIO_NC, /* S514 - NC */ + GPIO_FUNC0, /* S515 - WLAN_WAKE_L - INT */ + GPIO_FUNC0, /* S516 - PCH_PWRBTN_L */ + GPIO_NC, /* S517 - NC */ + GPIO_FUNC0, /* S518 - SUS_STAT# */ + GPIO_FUNC0, /* S519 - USB_OC0# */ + GPIO_FUNC0, /* S520 - USB_OC1# */ + GPIO_NC, /* S521 - NC */ + GPIO_NC, /* S522 - XDP_GPIO_DFX0 */ + GPIO_NC, /* S523 - XDP_GPIO_DFX1 */ + GPIO_NC, /* S524 - XDP_GPIO_DFX2 */ + GPIO_NC, /* S525 - XDP_GPIO_DFX3 */ + GPIO_NC, /* S526 - XDP_GPIO_DFX4 */ + GPIO_NC, /* S527 - XDP_GPIO_DFX5 */ + GPIO_NC, /* S528 - XDP_GPIO_DFX6 */ + GPIO_NC, /* S529 - XDP_GPIO_DFX7 */ + GPIO_NC, /* S530 - XDP_GPIO_DFX8 */ + GPIO_NC, /* S531 - NC */ + GPIO_NC, /* S532 - NC */ + GPIO_NC, /* S533 - NC */ + GPIO_NC, /* S534 - NC */ + GPIO_OUT_HIGH, /* S535 - LTE_DISABLE_L */ + GPIO_NC, /* S536 - NC */ + GPIO_INPUT, /* S537 - RAM_ID0 */ + GPIO_INPUT, /* S538 - RAM_ID1 */ + GPIO_INPUT, /* S539 - RAM_ID2 */ + /* TODO(shawnn): Change to normal input once our old boards + * are no longer in use. */ + GPIO_FUNC(0, PULL_DOWN, 20K), /* S540 - RAM_ID3 */ + GPIO_NC, /* S541 - NC */ + GPIO_NC, /* S542 - NC */ + GPIO_NC, /* S543 - NC */ + GPIO_END +}; + +static const u8 core_dedicated_irq[GPIO_MAX_DIRQS] = { + [TPAD_IRQ_OFFSET] = TPAD_IRQ_GPIO, + [TOUCH_IRQ_OFFSET] = TOUCH_IRQ_GPIO, + [I8042_IRQ_OFFSET] = I8042_IRQ_GPIO, +}; + +static const u8 sus_dedicated_irq[GPIO_MAX_DIRQS] = { + [CODEC_IRQ_OFFSET] = CODEC_IRQ_GPIO, +}; + +static struct soc_gpio_config gpio_config = { + .ncore = gpncore_gpio_map, + .score = gpscore_gpio_map, + .ssus = gpssus_gpio_map, + .core_dirq = &core_dedicated_irq, + .sus_dirq = &sus_dedicated_irq, +}; + +struct soc_gpio_config* mainboard_get_gpios(void) +{ + return &gpio_config; +} diff --git a/src/mainboard/google/rambi/variants/glimmer/include/variant/acpi/dptf.asl b/src/mainboard/google/rambi/variants/glimmer/include/variant/acpi/dptf.asl new file mode 100644 index 0000000..6e2630b --- /dev/null +++ b/src/mainboard/google/rambi/variants/glimmer/include/variant/acpi/dptf.asl @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define DPTF_CPU_PASSIVE 80 +#define DPTF_CPU_CRITICAL 90 + +#define DPTF_TSR0_SENSOR_ID 1 +#define DPTF_TSR0_SENSOR_NAME "TMP432_Power_Bottom" +#define DPTF_TSR0_PASSIVE 75 +#define DPTF_TSR0_CRITICAL 80 + +#define DPTF_TSR1_SENSOR_ID 2 +#define DPTF_TSR1_SENSOR_NAME "TMP432_RAM_bottom" +#define DPTF_TSR1_PASSIVE 75 +#define DPTF_TSR1_CRITICAL 80 + +#define DPTF_TSR2_SENSOR_ID 3 +#define DPTF_TSR2_SENSOR_NAME "TMP432_CPU_bottom" +#define DPTF_TSR2_PASSIVE 75 +#define DPTF_TSR2_CRITICAL 80 + +#define DPTF_ENABLE_CHARGER + +/* Charger performance states, board-specific values from charger and EC */ +Name (CHPS, Package () { + Package () { 0, 0, 0, 0, 255, 0x8ca, "mA", 0 }, /* 2.25A (MAX) */ + Package () { 0, 0, 0, 0, 32, 0x7d0, "mA", 0 }, /* 2.0A */ + Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 }, /* 1.5A */ + Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 }, /* 1.0A */ + Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 }, /* 0.5A */ + Package () { 0, 0, 0, 0, 0, 0x080, "mA", 0 }, /* 0.128A */ +}) diff --git a/src/mainboard/google/rambi/variants/glimmer/include/variant/acpi/mainboard.asl b/src/mainboard/google/rambi/variants/glimmer/include/variant/acpi/mainboard.asl new file mode 100644 index 0000000..82510bd --- /dev/null +++ b/src/mainboard/google/rambi/variants/glimmer/include/variant/acpi/mainboard.asl @@ -0,0 +1,19 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Elan trackpad */ +#include <mainboard/google/rambi/acpi/trackpad_elan.asl> + +/* Atmel touchscreen */ +#include <mainboard/google/rambi/acpi/touchscreen_atmel.asl> diff --git a/src/mainboard/google/rambi/variants/glimmer/include/variant/onboard.h b/src/mainboard/google/rambi/variants/glimmer/include/variant/onboard.h new file mode 100644 index 0000000..121da36 --- /dev/null +++ b/src/mainboard/google/rambi/variants/glimmer/include/variant/onboard.h @@ -0,0 +1,39 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ONBOARD_H +#define ONBOARD_H + +#include <mainboard/google/rambi/irqroute.h> + +/* PCH wake signal from EC. */ +#define BOARD_PCH_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(0) + +#define BOARD_TRACKPAD_NAME "trackpad" +#define BOARD_TRACKPAD_IRQ GPIO_S0_DED_IRQ(TPAD_IRQ_OFFSET) +#define BOARD_TRACKPAD_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(1) +#define BOARD_TRACKPAD_I2C_BUS 0 +#define BOARD_TRACKPAD_I2C_ADDR 0x15 + +#define BOARD_TOUCHSCREEN_NAME "touchscreen" +#define BOARD_TOUCHSCREEN_IRQ GPIO_S0_DED_IRQ(TOUCH_IRQ_OFFSET) +#define BOARD_TOUCHSCREEN_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(2) +#define BOARD_TOUCHSCREEN_I2C_BUS 5 +#define BOARD_TOUCHSCREEN_I2C_ADDR 0x4a + +#define BOARD_I8042_IRQ GPIO_S0_DED_IRQ(I8042_IRQ_OFFSET) +#define BOARD_CODEC_IRQ GPIO_S5_DED_IRQ(CODEC_IRQ_OFFSET) + +#endif diff --git a/src/mainboard/google/rambi/variants/glimmer/include/variant/variant.h b/src/mainboard/google/rambi/variants/glimmer/include/variant/variant.h new file mode 100644 index 0000000..0ea42c5 --- /dev/null +++ b/src/mainboard/google/rambi/variants/glimmer/include/variant/variant.h @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef VARIANT_H +#define VARIANT_H + +/* + * RAM_ID[2:0] are on GPIO_SSUS[39:37] + * 0b0000 - 4GiB total - 2 x 2GiB Micron MT41K256M16HA-125:E 1600MHz + * 0b0001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + * 0b0010 - 2GiB total - 2 x 1GiB Micron MT41K128M16JT-125:K 1600MHz + * 0b0011 - 2GiB total - 2 x 1GiB Hynix H5TC2G63FFR-PBA 1600MHz + * 0b0100 - 2GiB total - 2 x 1GiB Samsung K4B2G1646Q-BYK0 1600MHz + * 0b0101 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + * 0b0110 - 4GiB total - 2 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz + * 0b0111 - 4GiB total - 2 x 2GiB Elpida EDJ4216EFBG-GNL-F 1600MHz + * 0b1000 - 2GiB total - 1 x 2GiB Micron MT41K256M16HA-125:E 1600MHz + * 0b1001 - 2GiB total - 1 x 2GiB Elpida EDJ4216EFBG-GNL-F 1600MHz + * 0b1010 - 2GiB total - 1 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz + */ + +static const uint32_t dual_channel_config = + (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | + (1 << 4) | (1 << 6) | (1 << 7); + +#define SPD_SIZE 256 +#define GPIO_SSUS_37_PAD 57 +#define GPIO_SSUS_38_PAD 50 +#define GPIO_SSUS_39_PAD 58 +#define GPIO_SSUS_40_PAD 52 + +#endif diff --git a/src/mainboard/google/rambi/variants/gnawty/Makefile.inc b/src/mainboard/google/rambi/variants/gnawty/Makefile.inc new file mode 100644 index 0000000..05fbc69 --- /dev/null +++ b/src/mainboard/google/rambi/variants/gnawty/Makefile.inc @@ -0,0 +1,49 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2014 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +SPD_BIN = $(obj)/spd.bin + +# Order matters for SPD sources. The following indicies +# define the SPD data to use. +# 0b000 - 4GiB total - 2 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz +# 0b001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz +# 0b010 - 2GiB total - 2 x 1GiB Micron MT41K128M16JT-125:K 1600MHz +# 0b011 - 2GiB total - 1 x 2GiB Hynix H5TC4G63MFR-PBA 1600MHz +# 0b100 - 2GiB total - 1 x 2GiB Hynix H5TC4G63CFR-PBA 1600MHz +# 0b101 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz +# 0b110 - 4GiB total - 2 x 2GiB Hynix H5TC4G63CFR-PBA 1600MHz +# 0b111 - 4GiB total - 2 x 2GiB Hynix H5TC4G63MFR-PBA 1600MHz +SPD_SOURCES = samsung_2GiB_dimm_K4B4G1646Q-HYK0 +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += micron_1GiB_dimm_MT41K128M16JT-125 +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63MFR-PBA +SPD_SOURCES += Hynix_HMT425S6CFR6A_H5TC4G63CFR +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += Hynix_HMT425S6CFR6A_H5TC4G63CFR +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63MFR-PBA + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex) + +# Include spd ROM data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/google/rambi/variants/gnawty/devicetree.cb b/src/mainboard/google/rambi/variants/gnawty/devicetree.cb new file mode 100644 index 0000000..bb6fcad --- /dev/null +++ b/src/mainboard/google/rambi/variants/gnawty/devicetree.cb @@ -0,0 +1,101 @@ +chip soc/intel/baytrail + + # SATA port enable mask (2 ports) + register "sata_port_map" = "0x1" + register "sata_ahci" = "0x1" + register "ide_legacy_combined" = "0x0" + + # Route USB ports to XHCI + register "usb_route_to_xhci" = "1" + + # USB Port Disable Mask + register "usb2_port_disable_mask" = "0x0" + register "usb3_port_disable_mask" = "0x0" + + # USB PHY settings + # TODO: These values are from Baytrail and need tuned for Gnawty board + register "usb2_per_port_lane0" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" + register "usb2_per_port_lane1" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" + register "usb2_per_port_lane2" = "0x00049209" + register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" + register "usb2_per_port_lane3" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" + + # LPE audio codec settings + register "lpe_codec_clk_freq" = "25" # 25MHz clock + register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] + + # SD Card controller + register "sdcard_cap_low" = "0x036864b2" + register "sdcard_cap_high" = "0x0" + + # Enable devices in ACPI mode + register "lpe_acpi_mode" = "1" + register "lpss_acpi_mode" = "1" + register "scc_acpi_mode" = "1" + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + # Enable PIPEA as DP_C + register "gpu_pipea_port_select" = "2" # DP_C + register "gpu_pipea_power_cycle_delay" = "6" # 600ms + register "gpu_pipea_power_on_delay" = "5000" # 500ms + register "gpu_pipea_light_on_delay" = "70" # 7ms + register "gpu_pipea_power_off_delay" = "500" # 50ms + register "gpu_pipea_light_off_delay" = "2000" # 200ms + + # VR PS2 control + register "vnn_ps2_enable" = "1" + register "vcc_ps2_enable" = "1" + + # Disable SLP_X stretching after SUS power well fail. + register "disable_slp_x_stretch_sus_fail" = "1" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # SoC router + device pci 02.0 on end # GFX + device pci 11.0 off end # SDIO + device pci 12.0 on end # SD + device pci 13.0 on end # SATA + device pci 14.0 on end # XHCI + device pci 15.0 on end # LPE + device pci 17.0 on end # MMC + device pci 18.0 on end # SIO_DMA1 + device pci 18.1 on end # I2C1 + device pci 18.2 on end # I2C2 + device pci 18.3 off end # I2C3 + device pci 18.4 off end # I2C4 + device pci 18.5 on end # I2C5 + device pci 18.6 on end # I2C6 + device pci 18.7 off end # I2C7 + device pci 1a.0 on end # TXE + device pci 1b.0 on end # HDA + device pci 1c.0 on end # PCIE_PORT1 + device pci 1c.1 on end # PCIE_PORT2 + device pci 1c.2 off end # PCIE_PORT3 + device pci 1c.3 off end # PCIE_PORT4 + device pci 1d.0 on end # EHCI + device pci 1e.0 on end # SIO_DMA2 + device pci 1e.1 off end # PWM1 + device pci 1e.2 off end # PWM2 + device pci 1e.3 off end # HSUART1 + device pci 1e.4 off end # HSUART2 + device pci 1e.5 off end # SPI + device pci 1f.0 on + chip ec/google/chromeec + # We only have one init function that + # we need to call to initialize the + # keyboard part of the EC. + device pnp ff.1 on # dummy address + end + end + end # LPC Bridge + device pci 1f.3 off end # SMBus + end +end diff --git a/src/mainboard/google/rambi/variants/gnawty/gpio.c b/src/mainboard/google/rambi/variants/gnawty/gpio.c new file mode 100644 index 0000000..e79dc5a --- /dev/null +++ b/src/mainboard/google/rambi/variants/gnawty/gpio.c @@ -0,0 +1,229 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdlib.h> +#include <soc/gpio.h> +#include <mainboard/google/rambi/irqroute.h> + +/* NCORE GPIOs */ +static const struct soc_gpio_map gpncore_gpio_map[] = { + GPIO_FUNC2, /* S0_NC00 - INT_HDMI_HPD - INT */ + GPIO_FUNC2, /* S0_NC01 - HDMI_DDCDATA_SW */ + GPIO_FUNC2, /* S0_NC02 - HDMI_DDCCLK_SW */ + GPIO_NC, /* S0_NC03 - NC */ + GPIO_NC, /* S0_NC04 - NC */ + GPIO_NC, /* S0_NC05 - NC */ + GPIO_FUNC2, /* S0_NC06 - EDP_HPD_L */ + GPIO_INPUT, /* S0_NC07 - DDI1_DDCDATA - STRAP */ + GPIO_NC, /* S0_NC08 - NC */ + GPIO_OUT_HIGH, /* S0_NC09 - SOC_DISP_ON_C */ + GPIO_FUNC2, /* S0_NC10 - SOC_EDP_BLON_C */ + GPIO_FUNC2, /* S0_NC11 - SOC_DPST_PWM_C */ + GPIO_NC, /* S0_NC12 - NC */ + GPIO_INPUT, /* S0_NC13 - GPIO_NC13 - STRAP */ + GPIO_NC, /* S0_NC14 - NC */ + GPIO_DEFAULT, /* S0_NC15 - XDP_GPIO_S0_NC15 */ + GPIO_DEFAULT, /* S0_NC16 - XDP_GPIO_S0_NC16 */ + GPIO_DEFAULT, /* S0_NC17 - XDP_GPIO_S0_NC17 */ + GPIO_DEFAULT, /* S0_NC18 - XDP_GPIO_S0_NC18 */ + GPIO_DEFAULT, /* S0_NC19 - XDP_GPIO_S0_NC19 */ + GPIO_DEFAULT, /* S0_NC20 - XDP_GPIO_S0_NC20 */ + GPIO_DEFAULT, /* S0_NC21 - XDP_GPIO_S0_NC21 */ + GPIO_DEFAULT, /* S0_NC22 - XDP_GPIO_S0_NC22 */ + GPIO_DEFAULT, /* S0_NC23 - XDP_GPIO_S0_NC23 */ + GPIO_NC, /* S0_NC24 - NC */ + GPIO_NC, /* S0_NC25 - NC */ + GPIO_NC, /* S0_NC26 - NC */ + GPIO_END +}; + +/* SCORE GPIOs */ +static const struct soc_gpio_map gpscore_gpio_map[] = { + GPIO_ACPI_SCI, /* S0_SC000 - SOC_KBC_SCI - INT */ + GPIO_FUNC2, /* S0_SC001 - SATA_DEVSLP_C */ + GPIO_NC, /* S0-SC002 - SATA_LED_R_N (NC/PU) */ + GPIO_FUNC1, /* S0-SC003 - PCIE_CLKREQ_IMAGE# */ + GPIO_FUNC1, /* S0-SC004 - PCIE_CLKREQ_WLAN# */ + GPIO_NC, /* S0-SC005 - PCIE_CLKREQ_LAN# (NC) */ + GPIO_NC, /* S0-SC006 - PCIE_CLKREQ3# (NC) */ + GPIO_FUNC(2, PULL_DISABLE, 10K), /* S0-SC007 - SD3_WP external pull */ + GPIO_NC, /* S0-SC008 - ACZ_RST# (NC) */ + GPIO_NC, /* S0-SC009 - ACZ_SYNC (NC) */ + GPIO_NC, /* S0-SC010 - ACZ_BCLK (NC) */ + GPIO_NC, /* S0-SC011 - ACZ_STDOUT (NC) */ + GPIO_NC, /* S0-SC012 - PCH_AZ_CODEC_SDIN0 (NC) */ + GPIO_NC, /* S0-SC013 - NC */ + GPIO_INPUT, /* S0-SC014 - DET_TRIGGER - INT */ + GPIO_INPUT, /* S0-SC015 - AJACK_MICPRES_L - INT */ + GPIO_FUNC(3, PULL_DOWN, 20K), /* S0-SC016 - MMC1_45_CLK */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC017 - MMC1_45_D[0] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC018 - MMC1_45_D[1] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC019 - MMC1_45_D[2] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC020 - MMC1_45_D[3] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC021 - MMC1_45_D[4] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC022 - MMC1_45_D[5] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC023 - MMC1_45_D[6] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC024 - MMC1_45_D[7] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC025 - MMC1_45_CMD */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC026 - MMC1_45_RST */ + GPIO_NC, /* S0-SC027 - NC */ + GPIO_NC, /* S0-SC028 - NC */ + GPIO_NC, /* S0-SC029 - NC */ + GPIO_NC, /* S0-SC030 - NC */ + GPIO_NC, /* S0-SC031 - NC */ + GPIO_NC, /* S0-SC032 - NC */ + GPIO_FUNC(1, PULL_DOWN, 20K), /* S0-SC033 - SD3_CLK */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC034 - SD3_D0 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC035 - SD3_D1 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC036 - SD3_D2 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC037 - SD3_D3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC038 - SD3_CD# */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC039 - SD3_CMD */ + GPIO_NC, /* S0-SC040 - SDMMC3_1P8_EN - TP3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC041 - SDIO3_PWR_EN# */ + GPIO_FUNC1, /* S0-SC042 - LPC_LAD0 */ + GPIO_FUNC1, /* S0-SC043 - LPC-LAD1 */ + GPIO_FUNC1, /* S0-SC044 - LPC_LAD2 */ + GPIO_FUNC1, /* S0-SC045 - LPC_LAD3 */ + GPIO_FUNC1, /* S0-SC046 - LPC_LFRAME# */ + GPIO_FUNC1, /* S0-SC047 - PCLK_TPM */ + GPIO_FUNC1, /* S0-SC048 - CLK_PCI_EC */ + GPIO_FUNC1, /* S0-SC049 - LPC_CLKRUN_L */ + GPIO_NC, /* S0-SC050 - IRQ_SERIRQ */ + GPIO_NC, /* S0-SC051 - SMB_SOC_DATA (XDP) */ + GPIO_NC, /* S0-SC052 - SMB_SOC_CLK (XDP) */ + GPIO_NC, /* S0-SC053 - SMB_SOC_ALERTB (NC) */ + GPIO_DEFAULT, /* S0-SC054 - NC */ + GPIO_DIRQ, /* S0-SC055 - TRACKPAD_INT_DX */ + GPIO_INPUT, /* S0-SC056 - GPIO_S0_SC_56 - STRAP */ + GPIO_FUNC1, /* S0-SC057 - PCH_UART_TXD */ + GPIO_INPUT, /* S0-SC058 - SIM_DET_C */ + GPIO_INPUT_LEGACY, /* S0-SC059 - EC_IN_RW_C */ + GPIO_NC, /* S0-SC060 - NC */ + GPIO_FUNC1, /* S0-SC061 - SOC_UART_RX */ + GPIO_FUNC1, /* S0-SC062 - I2S_BCLK */ + GPIO_FUNC1, /* S0-SC063 - I2S_LRCLK */ + GPIO_FUNC1, /* S0-SC064 - I2S_DIN */ + GPIO_FUNC1, /* S0-SC065 - I2S_DOUT */ + GPIO_FUNC1, /* S0-SC066 - SIO_SPI_CS# */ + GPIO_FUNC1, /* S0-SC067 - SIO_SPI_MISO */ + GPIO_FUNC1, /* S0-SC068 - SIO_SPI_MOSI */ + GPIO_FUNC1, /* S0-SC069 - SIO_SPI_CLK */ + GPIO_NC, /* S0-SC070 - ALS_INT_L - INT(NC) */ + GPIO_NC, /* S0-SC071 - NC */ + GPIO_DIRQ, /* S0-SC072 - TOUCH_INT_L_DX */ + GPIO_NC, /* S0-SC073 - NC */ + GPIO_NC, /* S0-SC074 - SIO_UART2_RXD (NC) */ + GPIO_NC, /* S0-SC075 - SIO_UART2_TXD (NC) */ + GPIO_INPUT, /* S0-SC076 - BIOS_STRAP - STRAP */ + GPIO_INPUT, /* S0-SC077 - SOC_OVERRIDE - STRAP */ + GPIO_FUNC1, /* S0-SC078 - I2C_0_SDA */ + GPIO_FUNC1, /* S0-SC079 - I2C_0_SCL */ + GPIO_FUNC1, /* S0-SC080 - I2C_1_SDA */ + GPIO_FUNC1, /* S0-SC081 - I2C_1_SCL */ + GPIO_NC, /* S0-SC082 - NC */ + GPIO_NC, /* S0-SC083 - NC */ + GPIO_NC, /* S0-SC084 - NC */ + GPIO_NC, /* S0-SC085 - NC */ + GPIO_FUNC1, /* S0-SC086 - I2C_4_SDA */ + GPIO_FUNC1, /* S0-SC087 - I2C_4_SCL */ + GPIO_FUNC1, /* S0-SC088 - I2C_5_SDA */ + GPIO_FUNC1, /* S0-SC089 - I2C_5_SCL */ + GPIO_NC, /* S0-SC090 - NC */ + GPIO_NC, /* S0-SC091 - NC */ + GPIO_NC, /* S0-SC092 - I2C_NGFF_SDA (NC/PU) */ + GPIO_NC, /* S0-SC093 - I2C_NGFF_SCL (NC/PU) */ + GPIO_NC, /* S0-SC094 - NC */ + GPIO_NC, /* S0-SC095 - SIO_PWM1 (NC) */ + GPIO_FUNC1, /* S0-SC096 - I2S_MCLK */ + GPIO_NC, /* S0-SC097 - NC */ + GPIO_NC, /* S0-SC098 - NC */ + GPIO_NC, /* S0-SC099 - NC */ + GPIO_NC, /* S0-SC100 - NC */ + GPIO_DIRQ, /* S0-SC101 - KBD_IRQ# */ + GPIO_END +}; + +/* SSUS GPIOs */ +static const struct soc_gpio_map gpssus_gpio_map[] = { + GPIO_ACPI_WAKE, /* S500 - PCH_WAKE# */ + GPIO_ACPI_WAKE, /* S501 - TRACKPAD_INT# - INT */ + GPIO_ACPI_WAKE, /* S502 - TOUCH_INT# - INT */ + GPIO_FUNC6, /* S503 - LTE_WAKE_L# - INT */ + GPIO_NC, /* S504 - SOC_JTAG2_TDO (NC/PU) */ + GPIO_FUNC1, /* S505 - SUS_CLK_WLAN (NC) */ + GPIO_INPUT_PU, /* S506 - PCH_SPI_WP */ + GPIO_ACPI_SMI, /* S507 - SOC_KBC_SMI - INT */ + GPIO_NC, /* S508 - NC */ + GPIO_DIRQ, /* S509 - MUX_AUD_INT1# */ + GPIO_OUT_HIGH, /* S510 - WIFI_DISABLE_L */ + GPIO_FUNC0, /* S511 - SUSPWRDNACK */ + GPIO_FUNC0, /* S512 - WIFI_SUSCLK */ + GPIO_FUNC0, /* S513 - SLP_SX */ + GPIO_NC, /* S514 - NC */ + GPIO_FUNC0, /* S515 - WLAN_WAKE_L - INT */ + GPIO_FUNC0, /* S516 - PCH_PWRBTN_L */ + GPIO_NC, /* S517 - NC */ + GPIO_FUNC0, /* S518 - SUS_STAT# */ + GPIO_FUNC0, /* S519 - USB_OC0# */ + GPIO_FUNC0, /* S520 - USB_OC1# */ + GPIO_NC, /* S521 - NC */ + GPIO_NC, /* S522 - XDP_GPIO_DFX0 */ + GPIO_NC, /* S523 - XDP_GPIO_DFX1 */ + GPIO_NC, /* S524 - XDP_GPIO_DFX2 */ + GPIO_NC, /* S525 - XDP_GPIO_DFX3 */ + GPIO_NC, /* S526 - XDP_GPIO_DFX4 */ + GPIO_NC, /* S527 - XDP_GPIO_DFX5 */ + GPIO_NC, /* S528 - XDP_GPIO_DFX6 */ + GPIO_NC, /* S529 - XDP_GPIO_DFX7 */ + GPIO_NC, /* S530 - XDP_GPIO_DFX8 */ + GPIO_NC, /* S531 - NC */ + GPIO_NC, /* S532 - NC */ + GPIO_NC, /* S533 - NC */ + GPIO_NC, /* S534 - NC */ + GPIO_OUT_HIGH, /* S535 - LTE_DISABLE_L */ + GPIO_NC, /* S536 - NC */ + GPIO_INPUT, /* S537 - RAM_ID0 */ + GPIO_INPUT, /* S538 - RAM_ID1 */ + GPIO_INPUT, /* S539 - RAM_ID2 */ + GPIO_NC, /* S540 - NC */ + GPIO_NC, /* S541 - NC */ + GPIO_NC, /* S542 - NC */ + GPIO_NC, /* S543 - NC */ + GPIO_END +}; + +static const u8 core_dedicated_irq[GPIO_MAX_DIRQS] = { + [TPAD_IRQ_OFFSET] = TPAD_IRQ_GPIO, + [TOUCH_IRQ_OFFSET] = TOUCH_IRQ_GPIO, + [I8042_IRQ_OFFSET] = I8042_IRQ_GPIO, +}; + +static const u8 sus_dedicated_irq[GPIO_MAX_DIRQS] = { + [CODEC_IRQ_OFFSET] = CODEC_IRQ_GPIO, +}; + +static struct soc_gpio_config gpio_config = { + .ncore = gpncore_gpio_map, + .score = gpscore_gpio_map, + .ssus = gpssus_gpio_map, + .core_dirq = &core_dedicated_irq, + .sus_dirq = &sus_dedicated_irq, +}; + +struct soc_gpio_config* mainboard_get_gpios(void) +{ + return &gpio_config; +} diff --git a/src/mainboard/google/rambi/variants/gnawty/include/variant/acpi/dptf.asl b/src/mainboard/google/rambi/variants/gnawty/include/variant/acpi/dptf.asl new file mode 100644 index 0000000..1df96fa --- /dev/null +++ b/src/mainboard/google/rambi/variants/gnawty/include/variant/acpi/dptf.asl @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define DPTF_CPU_PASSIVE 80 +#define DPTF_CPU_CRITICAL 90 + +#define DPTF_TSR0_SENSOR_ID 1 +#define DPTF_TSR0_SENSOR_NAME "TMP432_Internal" +#define DPTF_TSR0_PASSIVE 45 +#define DPTF_TSR0_CRITICAL 80 + +#define DPTF_TSR1_SENSOR_ID 2 +#define DPTF_TSR1_SENSOR_NAME "TMP432_Power_top" +#define DPTF_TSR1_PASSIVE 70 +#define DPTF_TSR1_CRITICAL 85 + +#define DPTF_TSR2_SENSOR_ID 3 +#define DPTF_TSR2_SENSOR_NAME "TMP432_CPU_bottom" +#define DPTF_TSR2_PASSIVE 44 +#define DPTF_TSR2_CRITICAL 75 + +#define DPTF_ENABLE_CHARGER + +/* Charger performance states, board-specific values from charger and EC */ +Name (CHPS, Package () { + Package () { 0, 0, 0, 0, 255, 0x6a4, "mA", 0 }, /* 1.7A (MAX) */ + Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 }, /* 1.5A */ + Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 }, /* 1.0A */ + Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 }, /* 0.5A */ + Package () { 0, 0, 0, 0, 0, 0x080, "mA", 0 }, /* 0.128A */ +}) diff --git a/src/mainboard/google/rambi/variants/gnawty/include/variant/acpi/mainboard.asl b/src/mainboard/google/rambi/variants/gnawty/include/variant/acpi/mainboard.asl new file mode 100644 index 0000000..3cdd5c0 --- /dev/null +++ b/src/mainboard/google/rambi/variants/gnawty/include/variant/acpi/mainboard.asl @@ -0,0 +1,16 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Elan trackpad */ +#include <mainboard/google/rambi/acpi/trackpad_elan.asl> diff --git a/src/mainboard/google/rambi/variants/gnawty/include/variant/onboard.h b/src/mainboard/google/rambi/variants/gnawty/include/variant/onboard.h new file mode 100644 index 0000000..86ca488 --- /dev/null +++ b/src/mainboard/google/rambi/variants/gnawty/include/variant/onboard.h @@ -0,0 +1,39 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ONBOARD_H +#define ONBOARD_H + +#include <mainboard/google/rambi/irqroute.h> + +/* PCH wake signal from EC. */ +#define BOARD_PCH_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(0) + +#define BOARD_TRACKPAD_NAME "trackpad" +#define BOARD_TRACKPAD_IRQ GPIO_S0_DED_IRQ(TPAD_IRQ_OFFSET) +#define BOARD_TRACKPAD_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(1) +#define BOARD_TRACKPAD_I2C_BUS 0 +#define BOARD_TRACKPAD_I2C_ADDR 0x15 + +#define BOARD_TOUCHSCREEN_NAME "touchscreen" +#define BOARD_TOUCHSCREEN_IRQ GPIO_S0_DED_IRQ(TOUCH_IRQ_OFFSET) +#define BOARD_TOUCHSCREEN_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(2) +#define BOARD_TOUCHSCREEN_I2C_BUS 5 +#define BOARD_TOUCHSCREEN_I2C_ADDR 0x10 + +#define BOARD_I8042_IRQ GPIO_S0_DED_IRQ(I8042_IRQ_OFFSET) +#define BOARD_CODEC_IRQ GPIO_S5_DED_IRQ(CODEC_IRQ_OFFSET) + +#endif diff --git a/src/mainboard/google/rambi/variants/gnawty/include/variant/variant.h b/src/mainboard/google/rambi/variants/gnawty/include/variant/variant.h new file mode 100644 index 0000000..9bac7bc --- /dev/null +++ b/src/mainboard/google/rambi/variants/gnawty/include/variant/variant.h @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef VARIANT_H +#define VARIANT_H + +/* + * RAM_ID[2:0] are on GPIO_SSUS[39:37] + * 0b000 - 4GiB total - 2 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz + * 0b001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + * 0b010 - 2GiB total - 2 x 1GiB Micron MT41K128M16JT-125:K 1600MHz + * 0b011 - 2GiB total - 1 x 2GiB Hynix H5TC4G63MFR-PBA 1600MHz + * 0b100 - 2GiB total - 1 x 2GiB Hynix H5TC4G63CFR-PBA 1600MHz + * 0b101 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + * 0b110 - 4GiB total - 2 x 2GiB Hynix H5TC4G63CFR-PBA 1600MHz + * 0b111 - 4GiB total - 2 x 2GiB Hynix H5TC4G63MFR-PBA 1600MHz +*/ + +static const uint32_t dual_channel_config = + (1 << 0) | (1 << 1) | (1 << 2) | (1 << 6) | (1 << 7); + +#define SPD_SIZE 256 +#define GPIO_SSUS_37_PAD 57 +#define GPIO_SSUS_38_PAD 50 +#define GPIO_SSUS_39_PAD 58 + +#endif diff --git a/src/mainboard/google/rambi/variants/heli/Makefile.inc b/src/mainboard/google/rambi/variants/heli/Makefile.inc new file mode 100644 index 0000000..d76a127 --- /dev/null +++ b/src/mainboard/google/rambi/variants/heli/Makefile.inc @@ -0,0 +1,55 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +SPD_BIN = $(obj)/spd.bin + +# Order matters for SPD sources. The following indicies +# define the SPD data to use. +# RAM_ID Vendor Vendor_PN Freq Size Total_size channel +# 0b0011 Hynix H5TC4G63AFR-PBA 1600MHZ 4Gb 2GB single-channel +# 0b0100 Hynix H5TC4G63CFR-PBA 1600MHZ 4Gb 2GB single-channel +# 0b0101 Samsung K4B4G1646Q-HYK0 1600MHZ 4Gb 2GB single-channel +# 0b0110 Hynix H5TC4G63CFR-PBA 1600MHZ 4Gb 4GB dual-channel +# 0b0111 Samsung K4B4G1646Q-HYK0 1600MHZ 4Gb 4GB dual-channel +SPD_SOURCES = empty # 0b0000 +SPD_SOURCES += empty # 0b0001 +SPD_SOURCES += empty # 0b0010 +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA # 0b0011 +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63CFR-PBA # 0b0100 +SPD_SOURCES += samsung_2GiB_dimm_K4B4G1646Q-HYK0 # 0b0101 +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63CFR-PBA # 0b0110 +SPD_SOURCES += samsung_2GiB_dimm_K4B4G1646Q-HYK0 # 0b0111 +SPD_SOURCES += empty # 0b1000 +SPD_SOURCES += empty # 0b1001 +SPD_SOURCES += empty # 0b1010 +SPD_SOURCES += empty # 0b1011 +SPD_SOURCES += empty # 0b1100 +SPD_SOURCES += empty # 0b1101 +SPD_SOURCES += empty # 0b1110 +SPD_SOURCES += empty # 0b1111 + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex) + +# Include spd ROM data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/google/rambi/variants/heli/devicetree.cb b/src/mainboard/google/rambi/variants/heli/devicetree.cb new file mode 100644 index 0000000..d9b27e6 --- /dev/null +++ b/src/mainboard/google/rambi/variants/heli/devicetree.cb @@ -0,0 +1,102 @@ +chip soc/intel/baytrail + + # SATA port enable mask (2 ports) + register "sata_port_map" = "0x1" + register "sata_ahci" = "0x1" + register "ide_legacy_combined" = "0x0" + + # Route USB ports to XHCI + register "usb_route_to_xhci" = "1" + + # USB Port Disable Mask + register "usb2_port_disable_mask" = "0x0" + register "usb3_port_disable_mask" = "0x0" + + # USB PHY settings + # TODO: These values are from Baytrail and need tuned for Heli board + register "usb2_per_port_lane0" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" + register "usb2_per_port_lane1" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" + register "usb2_per_port_lane2" = "0x00049209" + register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" + register "usb2_per_port_lane3" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" + register "usb2_comp_bg" = "0x4700" + + # LPE audio codec settings + register "lpe_codec_clk_freq" = "25" # 25MHz clock + register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] + + # SD Card controller + register "sdcard_cap_low" = "0x036864b2" + register "sdcard_cap_high" = "0x0" + + # Enable devices in ACPI mode + register "lpe_acpi_mode" = "1" + register "lpss_acpi_mode" = "1" + register "scc_acpi_mode" = "1" + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + # Enable PIPEA as DP_C + register "gpu_pipea_port_select" = "2" # DP_C + register "gpu_pipea_power_cycle_delay" = "6" # 600ms + register "gpu_pipea_power_on_delay" = "5000" # 500ms + register "gpu_pipea_light_on_delay" = "70" # 7ms + register "gpu_pipea_power_off_delay" = "500" # 50ms + register "gpu_pipea_light_off_delay" = "2000" # 200ms + + # VR PS2 control + register "vnn_ps2_enable" = "1" + register "vcc_ps2_enable" = "1" + + # Disable SLP_X stretching after SUS power well fail. + register "disable_slp_x_stretch_sus_fail" = "1" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # SoC router + device pci 02.0 on end # GFX + device pci 11.0 off end # SDIO + device pci 12.0 on end # SD + device pci 13.0 on end # SATA + device pci 14.0 on end # XHCI + device pci 15.0 on end # LPE + device pci 17.0 on end # MMC + device pci 18.0 on end # SIO_DMA1 + device pci 18.1 on end # I2C1 + device pci 18.2 on end # I2C2 + device pci 18.3 off end # I2C3 + device pci 18.4 off end # I2C4 + device pci 18.5 off end # I2C5 + device pci 18.6 off end # I2C6 + device pci 18.7 off end # I2C7 + device pci 1a.0 on end # TXE + device pci 1b.0 on end # HDA + device pci 1c.0 on end # PCIE_PORT1 + device pci 1c.1 on end # PCIE_PORT2 + device pci 1c.2 off end # PCIE_PORT3 + device pci 1c.3 off end # PCIE_PORT4 + device pci 1d.0 on end # EHCI + device pci 1e.0 on end # SIO_DMA2 + device pci 1e.1 off end # PWM1 + device pci 1e.2 off end # PWM2 + device pci 1e.3 off end # HSUART1 + device pci 1e.4 off end # HSUART2 + device pci 1e.5 off end # SPI + device pci 1f.0 on + chip ec/google/chromeec + # We only have one init function that + # we need to call to initialize the + # keyboard part of the EC. + device pnp ff.1 on # dummy address + end + end + end # LPC Bridge + device pci 1f.3 off end # SMBus + end +end diff --git a/src/mainboard/google/rambi/variants/heli/gpio.c b/src/mainboard/google/rambi/variants/heli/gpio.c new file mode 100644 index 0000000..2a61c55 --- /dev/null +++ b/src/mainboard/google/rambi/variants/heli/gpio.c @@ -0,0 +1,228 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdlib.h> +#include <soc/gpio.h> +#include <mainboard/google/rambi/irqroute.h> + +/* NCORE GPIOs */ +static const struct soc_gpio_map gpncore_gpio_map[] = { + GPIO_FUNC2, /* S0_NC00 - INT_HDMI_HPD - INT */ + GPIO_FUNC2, /* S0_NC01 - HDMI_DDCDATA_SW */ + GPIO_FUNC2, /* S0_NC02 - HDMI_DDCCLK_SW */ + GPIO_NC, /* S0_NC03 - NC */ + GPIO_NC, /* S0_NC04 - NC */ + GPIO_NC, /* S0_NC05 - NC */ + GPIO_FUNC2, /* S0_NC06 - EDP_HPD_L */ + GPIO_INPUT, /* S0_NC07 - DDI1_DDCDATA - STRAP */ + GPIO_NC, /* S0_NC08 - NC */ + GPIO_OUT_HIGH, /* S0_NC09 - SOC_DISP_ON_C */ + GPIO_FUNC2, /* S0_NC10 - SOC_EDP_BLON_C */ + GPIO_FUNC2, /* S0_NC11 - SOC_DPST_PWM_C */ + GPIO_NC, /* S0_NC12 - NC */ + GPIO_INPUT, /* S0_NC13 - GPIO_NC13 - STRAP */ + GPIO_NC, /* S0_NC14 - NC */ + GPIO_DEFAULT, /* S0_NC15 - XDP_GPIO_S0_NC15 */ + GPIO_DEFAULT, /* S0_NC16 - XDP_GPIO_S0_NC16 */ + GPIO_DEFAULT, /* S0_NC17 - XDP_GPIO_S0_NC17 */ + GPIO_DEFAULT, /* S0_NC18 - XDP_GPIO_S0_NC18 */ + GPIO_DEFAULT, /* S0_NC19 - XDP_GPIO_S0_NC19 */ + GPIO_DEFAULT, /* S0_NC20 - XDP_GPIO_S0_NC20 */ + GPIO_DEFAULT, /* S0_NC21 - XDP_GPIO_S0_NC21 */ + GPIO_DEFAULT, /* S0_NC22 - XDP_GPIO_S0_NC22 */ + GPIO_DEFAULT, /* S0_NC23 - XDP_GPIO_S0_NC23 */ + GPIO_NC, /* S0_NC24 - NC */ + GPIO_NC, /* S0_NC25 - NC */ + GPIO_NC, /* S0_NC26 - NC */ + GPIO_END +}; + +/* SCORE GPIOs */ +static const struct soc_gpio_map gpscore_gpio_map[] = { + GPIO_ACPI_SCI, /* S0_SC000 - SOC_KBC_SCI - INT */ + GPIO_FUNC2, /* S0_SC001 - SATA_DEVSLP_C */ + GPIO_NC, /* S0-SC002 - SATA_LED_R_N (NC/PU) */ + GPIO_FUNC1, /* S0-SC003 - PCIE_CLKREQ_IMAGE# */ + GPIO_FUNC1, /* S0-SC004 - PCIE_CLKREQ_WLAN# */ + GPIO_NC, /* S0-SC005 - PCIE_CLKREQ_LAN# (NC) */ + GPIO_NC, /* S0-SC006 - PCIE_CLKREQ3# (NC) */ + GPIO_FUNC(2, PULL_DISABLE, 10K), /* S0-SC007 - SD3_WP external pull */ + GPIO_NC, /* S0-SC008 - ACZ_RST# (NC) */ + GPIO_NC, /* S0-SC009 - ACZ_SYNC (NC) */ + GPIO_NC, /* S0-SC010 - ACZ_BCLK (NC) */ + GPIO_NC, /* S0-SC011 - ACZ_STDOUT (NC) */ + GPIO_NC, /* S0-SC012 - PCH_AZ_CODEC_SDIN0 (NC) */ + GPIO_NC, /* S0-SC013 - NC */ + GPIO_INPUT, /* S0-SC014 - DET_TRIGGER - INT */ + GPIO_INPUT, /* S0-SC015 - AJACK_MICPRES_L - INT */ + GPIO_FUNC(3, PULL_DOWN, 20K), /* S0-SC016 - MMC1_45_CLK */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC017 - MMC1_45_D[0] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC018 - MMC1_45_D[1] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC019 - MMC1_45_D[2] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC020 - MMC1_45_D[3] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC021 - MMC1_45_D[4] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC022 - MMC1_45_D[5] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC023 - MMC1_45_D[6] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC024 - MMC1_45_D[7] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC025 - MMC1_45_CMD */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC026 - MMC1_45_RST */ + GPIO_NC, /* S0-SC027 - NC */ + GPIO_NC, /* S0-SC028 - NC */ + GPIO_NC, /* S0-SC029 - NC */ + GPIO_NC, /* S0-SC030 - NC */ + GPIO_NC, /* S0-SC031 - NC */ + GPIO_NC, /* S0-SC032 - NC */ + GPIO_FUNC(1, PULL_DOWN, 20K), /* S0-SC033 - SD3_CLK */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC034 - SD3_D0 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC035 - SD3_D1 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC036 - SD3_D2 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC037 - SD3_D3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC038 - SD3_CD# */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC039 - SD3_CMD */ + GPIO_NC, /* S0-SC040 - SDMMC3_1P8_EN - TP3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC041 - SDIO3_PWR_EN# */ + GPIO_FUNC1, /* S0-SC042 - LPC_LAD0 */ + GPIO_FUNC1, /* S0-SC043 - LPC-LAD1 */ + GPIO_FUNC1, /* S0-SC044 - LPC_LAD2 */ + GPIO_FUNC1, /* S0-SC045 - LPC_LAD3 */ + GPIO_FUNC1, /* S0-SC046 - LPC_LFRAME# */ + GPIO_FUNC1, /* S0-SC047 - PCLK_TPM */ + GPIO_FUNC1, /* S0-SC048 - CLK_PCI_EC */ + GPIO_FUNC1, /* S0-SC049 - LPC_CLKRUN_L */ + GPIO_NC, /* S0-SC050 - IRQ_SERIRQ */ + GPIO_NC, /* S0-SC051 - SMB_SOC_DATA (XDP) */ + GPIO_NC, /* S0-SC052 - SMB_SOC_CLK (XDP) */ + GPIO_NC, /* S0-SC053 - SMB_SOC_ALERTB (NC) */ + GPIO_DEFAULT, /* S0-SC054 - NC */ + GPIO_DIRQ, /* S0-SC055 - TRACKPAD_INT_DX */ + GPIO_INPUT, /* S0-SC056 - GPIO_S0_SC_56 - STRAP */ + GPIO_FUNC1, /* S0-SC057 - PCH_UART_TXD */ + GPIO_NC, /* S0-SC058 - SIM_DET_C (NC)*/ + GPIO_INPUT_LEGACY, /* S0-SC059 - EC_IN_RW_C */ + GPIO_NC, /* S0-SC060 - NC */ + GPIO_FUNC1, /* S0-SC061 - SOC_UART_RX */ + GPIO_FUNC1, /* S0-SC062 - I2S_BCLK */ + GPIO_FUNC1, /* S0-SC063 - I2S_LRCLK */ + GPIO_FUNC1, /* S0-SC064 - I2S_DIN */ + GPIO_FUNC1, /* S0-SC065 - I2S_DOUT */ + GPIO_FUNC1, /* S0-SC066 - SIO_SPI_CS# */ + GPIO_FUNC1, /* S0-SC067 - SIO_SPI_MISO */ + GPIO_FUNC1, /* S0-SC068 - SIO_SPI_MOSI */ + GPIO_FUNC1, /* S0-SC069 - SIO_SPI_CLK */ + GPIO_NC, /* S0-SC070 - ALS_INT_L (NC) */ + GPIO_NC, /* S0-SC071 - NC */ + GPIO_NC, /* S0-SC072 - TOUCH_INT_L_DX (NC) */ + GPIO_NC, /* S0-SC073 - NC */ + GPIO_NC, /* S0-SC074 - SIO_UART2_RXD (NC) */ + GPIO_NC, /* S0-SC075 - SIO_UART2_TXD (NC) */ + GPIO_INPUT, /* S0-SC076 - BIOS_STRAP - STRAP */ + GPIO_INPUT, /* S0-SC077 - SOC_OVERRIDE - STRAP */ + GPIO_FUNC1, /* S0-SC078 - I2C_0_SDA */ + GPIO_FUNC1, /* S0-SC079 - I2C_0_SCL */ + GPIO_FUNC1, /* S0-SC080 - I2C_1_SDA */ + GPIO_FUNC1, /* S0-SC081 - I2C_1_SCL */ + GPIO_NC, /* S0-SC082 - NC */ + GPIO_NC, /* S0-SC083 - NC */ + GPIO_NC, /* S0-SC084 - NC */ + GPIO_NC, /* S0-SC085 - NC */ + GPIO_FUNC1, /* S0-SC086 - I2C_4_SDA */ + GPIO_FUNC1, /* S0-SC087 - I2C_4_SCL */ + GPIO_FUNC1, /* S0-SC088 - I2C_5_SDA */ + GPIO_FUNC1, /* S0-SC089 - I2C_5_SCL */ + GPIO_NC, /* S0-SC090 - NC */ + GPIO_NC, /* S0-SC091 - NC */ + GPIO_NC, /* S0-SC092 - I2C_NGFF_SDA (NC/PU) */ + GPIO_NC, /* S0-SC093 - I2C_NGFF_SCL (NC/PU) */ + GPIO_NC, /* S0-SC094 - NC */ + GPIO_NC, /* S0-SC095 - SIO_PWM1 (NC) */ + GPIO_FUNC1, /* S0-SC096 - I2S_MCLK */ + GPIO_NC, /* S0-SC097 - NC */ + GPIO_NC, /* S0-SC098 - NC */ + GPIO_NC, /* S0-SC099 - NC */ + GPIO_NC, /* S0-SC100 - NC */ + GPIO_DIRQ, /* S0-SC101 - KBD_IRQ# */ + GPIO_END +}; + +/* SSUS GPIOs */ +static const struct soc_gpio_map gpssus_gpio_map[] = { + GPIO_ACPI_WAKE, /* S500 - PCH_WAKE# */ + GPIO_ACPI_WAKE, /* S501 - TRACKPAD_INT# - INT */ + GPIO_NC, /* S502 - TOUCH_INT# (NC) */ + GPIO_NC, /* S503 - LTE_WAKE_L# (NC) */ + GPIO_NC, /* S504 - SOC_JTAG2_TDO (NC/PU) */ + GPIO_NC, /* S505 - SUS_CLK_WLAN (NC) */ + GPIO_INPUT_PU, /* S506 - PCH_SPI_WP */ + GPIO_ACPI_SMI, /* S507 - SOC_KBC_SMI - INT */ + GPIO_NC, /* S508 - NC */ + GPIO_DIRQ, /* S509 - MUX_AUD_INT1# */ + GPIO_OUT_HIGH, /* S510 - WIFI_DISABLE_L */ + GPIO_FUNC0, /* S511 - SUSPWRDNACK */ + GPIO_FUNC0, /* S512 - WIFI_SUSCLK */ + GPIO_FUNC0, /* S513 - SLP_SX */ + GPIO_NC, /* S514 - NC */ + GPIO_FUNC0, /* S515 - WLAN_WAKE_L - INT */ + GPIO_FUNC0, /* S516 - PCH_PWRBTN_L */ + GPIO_NC, /* S517 - NC */ + GPIO_FUNC0, /* S518 - SUS_STAT# */ + GPIO_FUNC0, /* S519 - USB_OC0# */ + GPIO_FUNC0, /* S520 - USB_OC1# */ + GPIO_NC, /* S521 - NC */ + GPIO_NC, /* S522 - XDP_GPIO_DFX0 */ + GPIO_NC, /* S523 - XDP_GPIO_DFX1 */ + GPIO_NC, /* S524 - XDP_GPIO_DFX2 */ + GPIO_NC, /* S525 - XDP_GPIO_DFX3 */ + GPIO_NC, /* S526 - XDP_GPIO_DFX4 */ + GPIO_NC, /* S527 - XDP_GPIO_DFX5 */ + GPIO_NC, /* S528 - XDP_GPIO_DFX6 */ + GPIO_NC, /* S529 - XDP_GPIO_DFX7 */ + GPIO_NC, /* S530 - XDP_GPIO_DFX8 */ + GPIO_NC, /* S531 - NC */ + GPIO_NC, /* S532 - NC */ + GPIO_NC, /* S533 - NC */ + GPIO_NC, /* S534 - NC */ + GPIO_NC, /* S535 - LTE_DISABLE_L (NC) */ + GPIO_NC, /* S536 - NC */ + GPIO_INPUT, /* S537 - RAM_ID0 */ + GPIO_INPUT, /* S538 - RAM_ID1 */ + GPIO_INPUT, /* S539 - RAM_ID2 */ + GPIO_INPUT, /* S540 - RAM_ID3 */ + GPIO_NC, /* S541 - NC */ + GPIO_NC, /* S542 - NC */ + GPIO_NC, /* S543 - NC */ + GPIO_END +}; + +static const u8 core_dedicated_irq[GPIO_MAX_DIRQS] = { + [TPAD_IRQ_OFFSET] = TPAD_IRQ_GPIO, + [I8042_IRQ_OFFSET] = I8042_IRQ_GPIO, +}; + +static const u8 sus_dedicated_irq[GPIO_MAX_DIRQS] = { + [CODEC_IRQ_OFFSET] = CODEC_IRQ_GPIO, +}; + +static struct soc_gpio_config gpio_config = { + .ncore = gpncore_gpio_map, + .score = gpscore_gpio_map, + .ssus = gpssus_gpio_map, + .core_dirq = &core_dedicated_irq, + .sus_dirq = &sus_dedicated_irq, +}; + +struct soc_gpio_config* mainboard_get_gpios(void) +{ + return &gpio_config; +} diff --git a/src/mainboard/google/rambi/variants/heli/include/variant/acpi/dptf.asl b/src/mainboard/google/rambi/variants/heli/include/variant/acpi/dptf.asl new file mode 100644 index 0000000..adc796d --- /dev/null +++ b/src/mainboard/google/rambi/variants/heli/include/variant/acpi/dptf.asl @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define DPTF_CPU_PASSIVE 80 +#define DPTF_CPU_CRITICAL 90 + +#define DPTF_TSR0_SENSOR_ID 1 +#define DPTF_TSR0_SENSOR_NAME "TMP432_Internal" +#define DPTF_TSR0_PASSIVE 52 +#define DPTF_TSR0_CRITICAL 70 + +#define DPTF_TSR1_SENSOR_ID 2 +#define DPTF_TSR1_SENSOR_NAME "TMP432_Power_top" +#define DPTF_TSR1_PASSIVE 60 +#define DPTF_TSR1_CRITICAL 70 + +#define DPTF_TSR2_SENSOR_ID 3 +#define DPTF_TSR2_SENSOR_NAME "TMP432_CPU_bottom" +#define DPTF_TSR2_PASSIVE 65 +#define DPTF_TSR2_CRITICAL 70 + +#define DPTF_ENABLE_CHARGER + +/* Charger performance states, board-specific values from charger and EC */ +Name (CHPS, Package () { + Package () { 0, 0, 0, 0, 255, 0x6a4, "mA", 0 }, /* 1.7A (MAX) */ + Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 }, /* 1.5A */ + Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 }, /* 1.0A */ + Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 }, /* 0.5A */ + Package () { 0, 0, 0, 0, 0, 0x080, "mA", 0 }, /* 0.128A */ +}) diff --git a/src/mainboard/google/rambi/variants/heli/include/variant/acpi/mainboard.asl b/src/mainboard/google/rambi/variants/heli/include/variant/acpi/mainboard.asl new file mode 100644 index 0000000..3cdd5c0 --- /dev/null +++ b/src/mainboard/google/rambi/variants/heli/include/variant/acpi/mainboard.asl @@ -0,0 +1,16 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Elan trackpad */ +#include <mainboard/google/rambi/acpi/trackpad_elan.asl> diff --git a/src/mainboard/google/rambi/variants/heli/include/variant/onboard.h b/src/mainboard/google/rambi/variants/heli/include/variant/onboard.h new file mode 100644 index 0000000..f4ffed5 --- /dev/null +++ b/src/mainboard/google/rambi/variants/heli/include/variant/onboard.h @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ONBOARD_H +#define ONBOARD_H + +#include <mainboard/google/rambi/irqroute.h> + +/* PCH wake signal from EC. */ +#define BOARD_PCH_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(0) + +#define BOARD_TRACKPAD_NAME "trackpad" +#define BOARD_TRACKPAD_IRQ GPIO_S0_DED_IRQ(TPAD_IRQ_OFFSET) +#define BOARD_TRACKPAD_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(1) +#define BOARD_TRACKPAD_I2C_BUS 0 +#define BOARD_TRACKPAD_I2C_ADDR 0x15 + +#define BOARD_I8042_IRQ GPIO_S0_DED_IRQ(I8042_IRQ_OFFSET) +#define BOARD_CODEC_IRQ GPIO_S5_DED_IRQ(CODEC_IRQ_OFFSET) + +#endif diff --git a/src/mainboard/google/rambi/variants/heli/include/variant/variant.h b/src/mainboard/google/rambi/variants/heli/include/variant/variant.h new file mode 100644 index 0000000..d25b9c9 --- /dev/null +++ b/src/mainboard/google/rambi/variants/heli/include/variant/variant.h @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef VARIANT_H +#define VARIANT_H + +/* + * RAM_ID[3:0] are on GPIO_SSUS[40:37] + * RAM_ID Vendor Vendor_PN Freq Size Total_size channel + * 0b0011 Hynix H5TC4G63AFR-PBA 1600MHZ 4Gb 2GB single-channel + * 0b0100 Hynix H5TC4G63CFR-PBA 1600MHZ 4Gb 2GB single-channel + * 0b0101 Samsung K4B4G1646Q-HYK0 1600MHZ 4Gb 2GB single-channel + * 0b0110 Hynix H5TC4G63CFR-PBA 1600MHZ 4Gb 4GB dual-channel + * 0b0111 Samsung K4B4G1646Q-HYK0 1600MHZ 4Gb 4GB dual-channel + */ + +static const uint32_t dual_channel_config = + (1 << 6) | (1 << 7); + +#define SPD_SIZE 256 +#define GPIO_SSUS_37_PAD 57 +#define GPIO_SSUS_38_PAD 50 +#define GPIO_SSUS_39_PAD 58 +#define GPIO_SSUS_40_PAD 52 + +#endif diff --git a/src/mainboard/google/rambi/variants/kip/Makefile.inc b/src/mainboard/google/rambi/variants/kip/Makefile.inc new file mode 100644 index 0000000..06bd0e7 --- /dev/null +++ b/src/mainboard/google/rambi/variants/kip/Makefile.inc @@ -0,0 +1,49 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +SPD_BIN = $(obj)/spd.bin + +# Order matters for SPD sources. The following indicies +# define the SPD data to use. +# 0b000 - 4GiB total - 2 x 2GiB Micron MT41K256M16HA-125:E 1600MHz +# 0b001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz +# 0b010 - 4GiB total - 2 x 2GiB Elpida EDJ4216EFBG-GNL-F 1600MHz +# 0b011 - 2GiB total - 2 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz +# 0b100 - 2GiB total - 1 x 2GiB Micron MT41K256M16HA-125:E 1600MHz +# 0b101 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz +# 0b110 - 2GiB total - 1 x 2GiB Elpida EDJ4216EFBG-GNL-F 1600MHz +# 0b111 - 2GiB total - 1 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz +SPD_SOURCES = micron_2GiB_dimm_MT41K256M16HA-125a +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += elpida_2GiB_dimm_EDJ4216EFBG-GNL-F +SPD_SOURCES += samsung_2GiB_dimm_K4B4G1646Q-HYK0 +SPD_SOURCES += micron_2GiB_dimm_MT41K256M16HA-125a +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += elpida_2GiB_dimm_EDJ4216EFBG-GNL-F +SPD_SOURCES += samsung_2GiB_dimm_K4B4G1646Q-HYK0 + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex) + +# Include spd ROM data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/google/rambi/variants/kip/devicetree.cb b/src/mainboard/google/rambi/variants/kip/devicetree.cb new file mode 100644 index 0000000..f4e0a91 --- /dev/null +++ b/src/mainboard/google/rambi/variants/kip/devicetree.cb @@ -0,0 +1,101 @@ +chip soc/intel/baytrail + + # SATA port enable mask (2 ports) + register "sata_port_map" = "0x1" + register "sata_ahci" = "0x1" + register "ide_legacy_combined" = "0x0" + + # Route USB ports to XHCI + register "usb_route_to_xhci" = "1" + + # USB Port Disable Mask + register "usb2_port_disable_mask" = "0x0" + register "usb3_port_disable_mask" = "0x0" + + # USB PHY settings + # TODO: These values are from Baytrail and need tuned for Kip board + register "usb2_per_port_lane0" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" + register "usb2_per_port_lane1" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" + register "usb2_per_port_lane2" = "0x00049209" + register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" + register "usb2_per_port_lane3" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" + + # LPE audio codec settings + register "lpe_codec_clk_freq" = "25" # 25MHz clock + register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] + + # SD Card controller + register "sdcard_cap_low" = "0x036864b2" + register "sdcard_cap_high" = "0x0" + + # Enable devices in ACPI mode + register "lpe_acpi_mode" = "1" + register "lpss_acpi_mode" = "1" + register "scc_acpi_mode" = "1" + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + # Enable PIPEA as DP_C + register "gpu_pipea_port_select" = "2" # DP_C + register "gpu_pipea_power_cycle_delay" = "6" # 600ms + register "gpu_pipea_power_on_delay" = "5000" # 500ms + register "gpu_pipea_light_on_delay" = "70" # 7ms + register "gpu_pipea_power_off_delay" = "500" # 50ms + register "gpu_pipea_light_off_delay" = "2000" # 200ms + + # VR PS2 control + register "vnn_ps2_enable" = "1" + register "vcc_ps2_enable" = "1" + + # Disable SLP_X stretching after SUS power well fail. + register "disable_slp_x_stretch_sus_fail" = "1" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # SoC router + device pci 02.0 on end # GFX + device pci 11.0 off end # SDIO + device pci 12.0 on end # SD + device pci 13.0 on end # SATA + device pci 14.0 on end # XHCI + device pci 15.0 on end # LPE + device pci 17.0 on end # MMC + device pci 18.0 on end # SIO_DMA1 + device pci 18.1 on end # I2C1 + device pci 18.2 on end # I2C2 + device pci 18.3 off end # I2C3 + device pci 18.4 off end # I2C4 + device pci 18.5 on end # I2C5 + device pci 18.6 off end # I2C6 + device pci 18.7 off end # I2C7 + device pci 1a.0 on end # TXE + device pci 1b.0 on end # HDA + device pci 1c.0 on end # PCIE_PORT1 + device pci 1c.1 on end # PCIE_PORT2 + device pci 1c.2 off end # PCIE_PORT3 + device pci 1c.3 off end # PCIE_PORT4 + device pci 1d.0 on end # EHCI + device pci 1e.0 on end # SIO_DMA2 + device pci 1e.1 off end # PWM1 + device pci 1e.2 off end # PWM2 + device pci 1e.3 off end # HSUART1 + device pci 1e.4 off end # HSUART2 + device pci 1e.5 off end # SPI + device pci 1f.0 on + chip ec/google/chromeec + # We only have one init function that + # we need to call to initialize the + # keyboard part of the EC. + device pnp ff.1 on # dummy address + end + end + end # LPC Bridge + device pci 1f.3 off end # SMBus + end +end diff --git a/src/mainboard/google/rambi/variants/kip/gpio.c b/src/mainboard/google/rambi/variants/kip/gpio.c new file mode 100644 index 0000000..3d79d37 --- /dev/null +++ b/src/mainboard/google/rambi/variants/kip/gpio.c @@ -0,0 +1,230 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdlib.h> +#include <soc/gpio.h> +#include <mainboard/google/rambi/irqroute.h> + +/* NCORE GPIOs */ +static const struct soc_gpio_map gpncore_gpio_map[] = { + GPIO_FUNC2, /* S0_NC00 - INT_HDMI_HPD - INT */ + GPIO_FUNC2, /* S0_NC01 - HDMI_DDCDATA_SW */ + GPIO_FUNC2, /* S0_NC02 - HDMI_DDCCLK_SW */ + GPIO_NC, /* S0_NC03 - NC */ + GPIO_NC, /* S0_NC04 - NC */ + GPIO_NC, /* S0_NC05 - NC */ + GPIO_FUNC2, /* S0_NC06 - EDP_HPD_L */ + GPIO_INPUT, /* S0_NC07 - DDI1_DDCDATA - STRAP */ + GPIO_NC, /* S0_NC08 - NC */ + GPIO_OUT_HIGH, /* S0_NC09 - SOC_DISP_ON_C */ + GPIO_FUNC2, /* S0_NC10 - SOC_EDP_BLON_C */ + GPIO_FUNC2, /* S0_NC11 - SOC_DPST_PWM_C */ + GPIO_NC, /* S0_NC12 - NC */ + GPIO_INPUT, /* S0_NC13 - GPIO_NC13 - STRAP */ + GPIO_NC, /* S0_NC14 - NC */ + GPIO_DEFAULT, /* S0_NC15 - XDP_GPIO_S0_NC15 */ + GPIO_DEFAULT, /* S0_NC16 - XDP_GPIO_S0_NC16 */ + GPIO_DEFAULT, /* S0_NC17 - XDP_GPIO_S0_NC17 */ + GPIO_DEFAULT, /* S0_NC18 - XDP_GPIO_S0_NC18 */ + GPIO_DEFAULT, /* S0_NC19 - XDP_GPIO_S0_NC19 */ + GPIO_DEFAULT, /* S0_NC20 - XDP_GPIO_S0_NC20 */ + GPIO_DEFAULT, /* S0_NC21 - XDP_GPIO_S0_NC21 */ + GPIO_DEFAULT, /* S0_NC22 - XDP_GPIO_S0_NC22 */ + GPIO_DEFAULT, /* S0_NC23 - XDP_GPIO_S0_NC23 */ + GPIO_NC, /* S0_NC24 - NC */ + GPIO_NC, /* S0_NC25 - NC */ + GPIO_NC, /* S0_NC26 - NC */ + GPIO_END +}; + +/* SCORE GPIOs */ +static const struct soc_gpio_map gpscore_gpio_map[] = { + GPIO_ACPI_SCI, /* S0_SC000 - SOC_KBC_SCI - INT */ + GPIO_FUNC2, /* S0_SC001 - SATA_DEVSLP_C */ + GPIO_NC, /* S0-SC002 - SATA_LED_R_N (NC/PU) */ + GPIO_FUNC1, /* S0-SC003 - PCIE_CLKREQ_IMAGE# */ + GPIO_FUNC1, /* S0-SC004 - PCIE_CLKREQ_WLAN# */ + GPIO_NC, /* S0-SC005 - PCIE_CLKREQ_LAN# (NC) */ + GPIO_NC, /* S0-SC006 - PCIE_CLKREQ3# (NC) */ + GPIO_FUNC(2, PULL_DISABLE, 10K), /* S0-SC007 - SD3_WP external pull */ + GPIO_NC, /* S0-SC008 - ACZ_RST# (NC) */ + GPIO_NC, /* S0-SC009 - ACZ_SYNC (NC) */ + GPIO_NC, /* S0-SC010 - ACZ_BCLK (NC) */ + GPIO_NC, /* S0-SC011 - ACZ_STDOUT (NC) */ + GPIO_NC, /* S0-SC012 - PCH_AZ_CODEC_SDIN0 (NC) */ + GPIO_NC, /* S0-SC013 - NC */ + GPIO_INPUT, /* S0-SC014 - DET_TRIGGER - INT */ + GPIO_INPUT, /* S0-SC015 - AJACK_MICPRES_L - INT */ + GPIO_FUNC(3, PULL_DOWN, 20K), /* S0-SC016 - MMC1_45_CLK */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC017 - MMC1_45_D[0] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC018 - MMC1_45_D[1] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC019 - MMC1_45_D[2] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC020 - MMC1_45_D[3] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC021 - MMC1_45_D[4] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC022 - MMC1_45_D[5] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC023 - MMC1_45_D[6] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC024 - MMC1_45_D[7] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC025 - MMC1_45_CMD */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC026 - MMC1_45_RST */ + GPIO_NC, /* S0-SC027 - NC */ + GPIO_NC, /* S0-SC028 - NC */ + GPIO_NC, /* S0-SC029 - NC */ + GPIO_NC, /* S0-SC030 - NC */ + GPIO_NC, /* S0-SC031 - NC */ + GPIO_NC, /* S0-SC032 - NC */ + GPIO_FUNC(1, PULL_DOWN, 20K), /* S0-SC033 - SD3_CLK */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC034 - SD3_D0 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC035 - SD3_D1 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC036 - SD3_D2 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC037 - SD3_D3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC038 - SD3_CD# */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC039 - SD3_CMD */ + GPIO_NC, /* S0-SC040 - SDMMC3_1P8_EN - TP3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC041 - SDIO3_PWR_EN# */ + GPIO_FUNC1, /* S0-SC042 - LPC_LAD0 */ + GPIO_FUNC1, /* S0-SC043 - LPC-LAD1 */ + GPIO_FUNC1, /* S0-SC044 - LPC_LAD2 */ + GPIO_FUNC1, /* S0-SC045 - LPC_LAD3 */ + GPIO_FUNC1, /* S0-SC046 - LPC_LFRAME# */ + GPIO_FUNC1, /* S0-SC047 - PCLK_TPM */ + GPIO_FUNC1, /* S0-SC048 - CLK_PCI_EC */ + GPIO_FUNC1, /* S0-SC049 - LPC_CLKRUN_L */ + GPIO_NC, /* S0-SC050 - IRQ_SERIRQ */ + GPIO_NC, /* S0-SC051 - SMB_SOC_DATA (XDP) */ + GPIO_NC, /* S0-SC052 - SMB_SOC_CLK (XDP) */ + GPIO_NC, /* S0-SC053 - SMB_SOC_ALERTB (NC) */ + GPIO_DEFAULT, /* S0-SC054 - NC */ + GPIO_DIRQ, /* S0-SC055 - TRACKPAD_INT_DX */ + GPIO_INPUT, /* S0-SC056 - GPIO_S0_SC_56 - STRAP */ + GPIO_FUNC1, /* S0-SC057 - PCH_UART_TXD */ + GPIO_INPUT, /* S0-SC058 - SIM_DET_C */ + GPIO_INPUT_LEGACY, /* S0-SC059 - EC_IN_RW_C */ + GPIO_NC, /* S0-SC060 - NC */ + GPIO_FUNC1, /* S0-SC061 - SOC_UART_RX */ + GPIO_FUNC1, /* S0-SC062 - I2S_BCLK */ + GPIO_FUNC1, /* S0-SC063 - I2S_LRCLK */ + GPIO_FUNC1, /* S0-SC064 - I2S_DIN */ + GPIO_FUNC1, /* S0-SC065 - I2S_DOUT */ + GPIO_FUNC1, /* S0-SC066 - SIO_SPI_CS# */ + GPIO_FUNC1, /* S0-SC067 - SIO_SPI_MISO */ + GPIO_FUNC1, /* S0-SC068 - SIO_SPI_MOSI */ + GPIO_FUNC1, /* S0-SC069 - SIO_SPI_CLK */ + GPIO_DIRQ, /* S0-SC070 - ALS_INT_L - INT */ + GPIO_NC, /* S0-SC071 - NC */ + GPIO_DIRQ, /* S0-SC072 - TOUCH_INT_L_DX */ + GPIO_NC, /* S0-SC073 - NC */ + GPIO_NC, /* S0-SC074 - SIO_UART2_RXD (NC) */ + GPIO_NC, /* S0-SC075 - SIO_UART2_TXD (NC) */ + GPIO_INPUT, /* S0-SC076 - BIOS_STRAP - STRAP */ + GPIO_INPUT, /* S0-SC077 - SOC_OVERRIDE - STRAP */ + GPIO_FUNC1, /* S0-SC078 - I2C_0_SDA */ + GPIO_FUNC1, /* S0-SC079 - I2C_0_SCL */ + GPIO_FUNC1, /* S0-SC080 - I2C_1_SDA */ + GPIO_FUNC1, /* S0-SC081 - I2C_1_SCL */ + GPIO_NC, /* S0-SC082 - NC */ + GPIO_NC, /* S0-SC083 - NC */ + GPIO_NC, /* S0-SC084 - NC */ + GPIO_NC, /* S0-SC085 - NC */ + GPIO_FUNC1, /* S0-SC086 - I2C_4_SDA */ + GPIO_FUNC1, /* S0-SC087 - I2C_4_SCL */ + GPIO_FUNC1, /* S0-SC088 - I2C_5_SDA */ + GPIO_FUNC1, /* S0-SC089 - I2C_5_SCL */ + GPIO_NC, /* S0-SC090 - NC */ + GPIO_NC, /* S0-SC091 - NC */ + GPIO_NC, /* S0-SC092 - I2C_NGFF_SDA (NC/PU) */ + GPIO_NC, /* S0-SC093 - I2C_NGFF_SCL (NC/PU) */ + GPIO_NC, /* S0-SC094 - NC */ + GPIO_NC, /* S0-SC095 - SIO_PWM1 (NC) */ + GPIO_FUNC1, /* S0-SC096 - I2S_MCLK */ + GPIO_NC, /* S0-SC097 - NC */ + GPIO_NC, /* S0-SC098 - NC */ + GPIO_NC, /* S0-SC099 - NC */ + GPIO_NC, /* S0-SC100 - NC */ + GPIO_DIRQ, /* S0-SC101 - KBD_IRQ# */ + GPIO_END +}; + +/* SSUS GPIOs */ +static const struct soc_gpio_map gpssus_gpio_map[] = { + GPIO_ACPI_WAKE, /* S500 - PCH_WAKE# */ + GPIO_ACPI_WAKE, /* S501 - TRACKPAD_INT# - INT */ + GPIO_ACPI_WAKE, /* S502 - TOUCH_INT# - INT */ + GPIO_FUNC6, /* S503 - LTE_WAKE_L# - INT */ + GPIO_NC, /* S504 - SOC_JTAG2_TDO (NC/PU) */ + GPIO_FUNC1, /* S505 - SUS_CLK_WLAN (NC) */ + GPIO_INPUT_PU, /* S506 - PCH_SPI_WP */ + GPIO_ACPI_SMI, /* S507 - SOC_KBC_SMI - INT */ + GPIO_NC, /* S508 - NC */ + GPIO_DIRQ, /* S509 - MUX_AUD_INT1# */ + GPIO_OUT_HIGH, /* S510 - WIFI_DISABLE_L */ + GPIO_FUNC0, /* S511 - SUSPWRDNACK */ + GPIO_FUNC0, /* S512 - WIFI_SUSCLK */ + GPIO_FUNC0, /* S513 - SLP_SX */ + GPIO_NC, /* S514 - NC */ + GPIO_FUNC0, /* S515 - WLAN_WAKE_L - INT */ + GPIO_FUNC0, /* S516 - PCH_PWRBTN_L */ + GPIO_NC, /* S517 - NC */ + GPIO_FUNC0, /* S518 - SUS_STAT# */ + GPIO_FUNC0, /* S519 - USB_OC0# */ + GPIO_FUNC0, /* S520 - USB_OC1# */ + GPIO_NC, /* S521 - NC */ + GPIO_NC, /* S522 - XDP_GPIO_DFX0 */ + GPIO_NC, /* S523 - XDP_GPIO_DFX1 */ + GPIO_NC, /* S524 - XDP_GPIO_DFX2 */ + GPIO_NC, /* S525 - XDP_GPIO_DFX3 */ + GPIO_NC, /* S526 - XDP_GPIO_DFX4 */ + GPIO_NC, /* S527 - XDP_GPIO_DFX5 */ + GPIO_NC, /* S528 - XDP_GPIO_DFX6 */ + GPIO_NC, /* S529 - XDP_GPIO_DFX7 */ + GPIO_NC, /* S530 - XDP_GPIO_DFX8 */ + GPIO_NC, /* S531 - NC */ + GPIO_NC, /* S532 - NC */ + GPIO_NC, /* S533 - NC */ + GPIO_NC, /* S534 - NC */ + GPIO_OUT_HIGH, /* S535 - LTE_DISABLE_L */ + GPIO_NC, /* S536 - NC */ + GPIO_INPUT, /* S537 - RAM_ID0 */ + GPIO_INPUT, /* S538 - RAM_ID1 */ + GPIO_INPUT, /* S539 - RAM_ID2 */ + GPIO_NC, /* S540 - NC */ + GPIO_NC, /* S541 - NC */ + GPIO_NC, /* S542 - NC */ + GPIO_NC, /* S543 - NC */ + GPIO_END +}; + +static const u8 core_dedicated_irq[GPIO_MAX_DIRQS] = { + [TPAD_IRQ_OFFSET] = TPAD_IRQ_GPIO, + [TOUCH_IRQ_OFFSET] = TOUCH_IRQ_GPIO, + [I8042_IRQ_OFFSET] = I8042_IRQ_GPIO, + [ALS_IRQ_OFFSET] = ALS_IRQ_GPIO, +}; + +static const u8 sus_dedicated_irq[GPIO_MAX_DIRQS] = { + [CODEC_IRQ_OFFSET] = CODEC_IRQ_GPIO, +}; + +static struct soc_gpio_config gpio_config = { + .ncore = gpncore_gpio_map, + .score = gpscore_gpio_map, + .ssus = gpssus_gpio_map, + .core_dirq = &core_dedicated_irq, + .sus_dirq = &sus_dedicated_irq, +}; + +struct soc_gpio_config* mainboard_get_gpios(void) +{ + return &gpio_config; +} diff --git a/src/mainboard/google/rambi/variants/kip/include/variant/acpi/dptf.asl b/src/mainboard/google/rambi/variants/kip/include/variant/acpi/dptf.asl new file mode 100644 index 0000000..e88ac7d --- /dev/null +++ b/src/mainboard/google/rambi/variants/kip/include/variant/acpi/dptf.asl @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define DPTF_CPU_PASSIVE 80 +#define DPTF_CPU_CRITICAL 90 + +#define DPTF_TSR0_SENSOR_ID 1 +#define DPTF_TSR0_SENSOR_NAME "TMP432_Internal" +#define DPTF_TSR0_PASSIVE 58 +#define DPTF_TSR0_CRITICAL 70 + +#define DPTF_TSR1_SENSOR_ID 2 +#define DPTF_TSR1_SENSOR_NAME "TMP432_Power_top" +#define DPTF_TSR1_PASSIVE 58 +#define DPTF_TSR1_CRITICAL 70 + +#define DPTF_TSR2_SENSOR_ID 3 +#define DPTF_TSR2_SENSOR_NAME "TMP432_CPU_bottom" +#define DPTF_TSR2_PASSIVE 57 +#define DPTF_TSR2_CRITICAL 70 + +#define DPTF_ENABLE_CHARGER + +/* Charger performance states, board-specific values from charger and EC */ +Name (CHPS, Package () { + Package () { 0, 0, 0, 0, 255, 0x6a4, "mA", 0 }, /* 1.7A (MAX) */ + Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 }, /* 1.5A */ + Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 }, /* 1.0A */ + Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 }, /* 0.5A */ + Package () { 0, 0, 0, 0, 0, 0x080, "mA", 0 }, /* 0.128A */ +}) diff --git a/src/mainboard/google/rambi/variants/kip/include/variant/acpi/mainboard.asl b/src/mainboard/google/rambi/variants/kip/include/variant/acpi/mainboard.asl new file mode 100644 index 0000000..3cdd5c0 --- /dev/null +++ b/src/mainboard/google/rambi/variants/kip/include/variant/acpi/mainboard.asl @@ -0,0 +1,16 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Elan trackpad */ +#include <mainboard/google/rambi/acpi/trackpad_elan.asl> diff --git a/src/mainboard/google/rambi/variants/kip/include/variant/onboard.h b/src/mainboard/google/rambi/variants/kip/include/variant/onboard.h new file mode 100644 index 0000000..4bb37be --- /dev/null +++ b/src/mainboard/google/rambi/variants/kip/include/variant/onboard.h @@ -0,0 +1,34 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ONBOARD_H +#define ONBOARD_H + +#include <mainboard/google/rambi/irqroute.h> + +/* PCH wake signal from EC. */ +#define BOARD_PCH_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(0) + +#define BOARD_TRACKPAD_NAME "trackpad" +#define BOARD_TRACKPAD_IRQ GPIO_S0_DED_IRQ(TPAD_IRQ_OFFSET) +#define BOARD_TRACKPAD_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(1) +#define BOARD_TRACKPAD_I2C_BUS 0 +#define BOARD_TRACKPAD_I2C_ADDR 0x15 + +#define BOARD_I8042_IRQ GPIO_S0_DED_IRQ(I8042_IRQ_OFFSET) +#define BOARD_CODEC_IRQ GPIO_S5_DED_IRQ(CODEC_IRQ_OFFSET) +#define BOARD_ALS_IRQ GPIO_S0_DED_IRQ(ALS_IRQ_OFFSET) + +#endif diff --git a/src/mainboard/google/rambi/variants/kip/include/variant/variant.h b/src/mainboard/google/rambi/variants/kip/include/variant/variant.h new file mode 100644 index 0000000..7f058d7 --- /dev/null +++ b/src/mainboard/google/rambi/variants/kip/include/variant/variant.h @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef VARIANT_H +#define VARIANT_H + +/* + * RAM_ID[2:0] are on GPIO_SSUS[39:37] + * 0b000 - 4GiB total - 2 x 2GiB Micron MT41K256M16HA-125:E 1600MHz + * 0b001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + * 0b010 - 4GiB total - 2 x 2GiB Elpida EDJ4216EFBG-GNL-F 1600MHz + * 0b011 - 2GiB total - 2 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz + * 0b100 - 2GiB total - 1 x 2GiB Micron MT41K256M16HA-125:E 1600MHz + * 0b101 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + * 0b110 - 2GiB total - 1 x 2GiB Elpida EDJ4216EFBG-GNL-F 1600MHz + * 0b111 - 2GiB total - 1 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz + */ + +static const uint32_t dual_channel_config = + (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3); + +#define SPD_SIZE 256 +#define GPIO_SSUS_37_PAD 57 +#define GPIO_SSUS_38_PAD 50 +#define GPIO_SSUS_39_PAD 58 + +#endif diff --git a/src/mainboard/google/rambi/variants/orco/Makefile.inc b/src/mainboard/google/rambi/variants/orco/Makefile.inc new file mode 100644 index 0000000..1f9706e --- /dev/null +++ b/src/mainboard/google/rambi/variants/orco/Makefile.inc @@ -0,0 +1,49 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2015 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +SPD_BIN = $(obj)/spd.bin + +# Order matters for SPD sources. The following indicies +# define the SPD data to use. +# 0b000 - 4GiB total - 2 x 2GiB Micron MT41K256M16HA-125:E 1600MHz +# 0b001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz +# 0b010 - 2GiB total - 2 x 1GiB Micron MT41K128M16JT-125:K 1600MHz +# 0b011 - 2GiB total - 2 x 1GiB Hynix H5TC2G63FFR-PBA 1600MHz +# 0b100 - 2GiB total - 1 x 2GiB Micron MT41K256M16HA-125:E 1600MHz +# 0b101 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz +# 0b110 - 4GiB total - 2 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz +# 0b111 - 2GiB total - 1 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz +SPD_SOURCES = micron_2GiB_dimm_MT41K256M16HA-125 +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += micron_1GiB_dimm_MT41K128M16JT-125 +SPD_SOURCES += hynix_1GiB_dimm_H5TC2G63FFR-PBA +SPD_SOURCES += micron_2GiB_dimm_MT41K256M16HA-125 +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += samsung_2GiB_dimm_K4B4G1646Q-HYK0 +SPD_SOURCES += samsung_2GiB_dimm_K4B4G1646Q-HYK0 + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex) + +# Include spd ROM data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/google/rambi/variants/orco/devicetree.cb b/src/mainboard/google/rambi/variants/orco/devicetree.cb new file mode 100644 index 0000000..8291794 --- /dev/null +++ b/src/mainboard/google/rambi/variants/orco/devicetree.cb @@ -0,0 +1,101 @@ +chip soc/intel/baytrail + + # SATA port enable mask (2 ports) + register "sata_port_map" = "0x1" + register "sata_ahci" = "0x1" + register "ide_legacy_combined" = "0x0" + + # Route USB ports to XHCI + register "usb_route_to_xhci" = "1" + + # USB Port Disable Mask + register "usb2_port_disable_mask" = "0x0" + register "usb3_port_disable_mask" = "0x0" + + # USB PHY settings + # TODO: These values are from Baytrail and need tuned for Orco board + register "usb2_per_port_lane0" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" + register "usb2_per_port_lane1" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" + register "usb2_per_port_lane2" = "0x00049209" + register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" + register "usb2_per_port_lane3" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" + + # LPE audio codec settings + register "lpe_codec_clk_freq" = "25" # 25MHz clock + register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] + + # SD Card controller + register "sdcard_cap_low" = "0x036864b2" + register "sdcard_cap_high" = "0x0" + + # Enable devices in ACPI mode + register "lpe_acpi_mode" = "1" + register "lpss_acpi_mode" = "1" + register "scc_acpi_mode" = "1" + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + # Enable PIPEA as DP_C + register "gpu_pipea_port_select" = "2" # DP_C + register "gpu_pipea_power_cycle_delay" = "6" # 600ms + register "gpu_pipea_power_on_delay" = "5000" # 500ms + register "gpu_pipea_light_on_delay" = "70" # 7ms + register "gpu_pipea_power_off_delay" = "500" # 50ms + register "gpu_pipea_light_off_delay" = "2000" # 200ms + + # VR PS2 control + register "vnn_ps2_enable" = "1" + register "vcc_ps2_enable" = "1" + + # Disable SLP_X stretching after SUS power well fail. + register "disable_slp_x_stretch_sus_fail" = "1" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # SoC router + device pci 02.0 on end # GFX + device pci 11.0 off end # SDIO + device pci 12.0 on end # SD + device pci 13.0 on end # SATA + device pci 14.0 on end # XHCI + device pci 15.0 on end # LPE + device pci 17.0 on end # MMC + device pci 18.0 on end # SIO_DMA1 + device pci 18.1 on end # I2C1 + device pci 18.2 on end # I2C2 + device pci 18.3 off end # I2C3 + device pci 18.4 off end # I2C4 + device pci 18.5 off end # I2C5 + device pci 18.6 off end # I2C6 + device pci 18.7 off end # I2C7 + device pci 1a.0 on end # TXE + device pci 1b.0 on end # HDA + device pci 1c.0 on end # PCIE_PORT1 + device pci 1c.1 on end # PCIE_PORT2 + device pci 1c.2 off end # PCIE_PORT3 + device pci 1c.3 off end # PCIE_PORT4 + device pci 1d.0 on end # EHCI + device pci 1e.0 on end # SIO_DMA2 + device pci 1e.1 off end # PWM1 + device pci 1e.2 off end # PWM2 + device pci 1e.3 off end # HSUART1 + device pci 1e.4 off end # HSUART2 + device pci 1e.5 off end # SPI + device pci 1f.0 on + chip ec/google/chromeec + # We only have one init function that + # we need to call to initialize the + # keyboard part of the EC. + device pnp ff.1 on # dummy address + end + end + end # LPC Bridge + device pci 1f.3 off end # SMBus + end +end diff --git a/src/mainboard/google/rambi/variants/orco/gpio.c b/src/mainboard/google/rambi/variants/orco/gpio.c new file mode 100644 index 0000000..f2bbe8a --- /dev/null +++ b/src/mainboard/google/rambi/variants/orco/gpio.c @@ -0,0 +1,229 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdlib.h> +#include <soc/gpio.h> +#include <mainboard/google/rambi/irqroute.h> + +/* NCORE GPIOs */ +static const struct soc_gpio_map gpncore_gpio_map[] = { + GPIO_FUNC2, /* S0_NC00 - INT_HDMI_HPD - INT */ + GPIO_FUNC2, /* S0_NC01 - HDMI_DDCDATA_SW */ + GPIO_FUNC2, /* S0_NC02 - HDMI_DDCCLK_SW */ + GPIO_NC, /* S0_NC03 - NC */ + GPIO_NC, /* S0_NC04 - NC */ + GPIO_NC, /* S0_NC05 - NC */ + GPIO_FUNC2, /* S0_NC06 - EDP_HPD_L */ + GPIO_INPUT, /* S0_NC07 - DDI1_DDCDATA - STRAP */ + GPIO_NC, /* S0_NC08 - NC */ + GPIO_OUT_HIGH, /* S0_NC09 - SOC_DISP_ON_C */ + GPIO_FUNC2, /* S0_NC10 - SOC_EDP_BLON_C */ + GPIO_FUNC2, /* S0_NC11 - SOC_DPST_PWM_C */ + GPIO_NC, /* S0_NC12 - NC */ + GPIO_INPUT, /* S0_NC13 - GPIO_NC13 - STRAP */ + GPIO_NC, /* S0_NC14 - NC */ + GPIO_DEFAULT, /* S0_NC15 - XDP_GPIO_S0_NC15 */ + GPIO_DEFAULT, /* S0_NC16 - XDP_GPIO_S0_NC16 */ + GPIO_DEFAULT, /* S0_NC17 - XDP_GPIO_S0_NC17 */ + GPIO_DEFAULT, /* S0_NC18 - XDP_GPIO_S0_NC18 */ + GPIO_DEFAULT, /* S0_NC19 - XDP_GPIO_S0_NC19 */ + GPIO_DEFAULT, /* S0_NC20 - XDP_GPIO_S0_NC20 */ + GPIO_DEFAULT, /* S0_NC21 - XDP_GPIO_S0_NC21 */ + GPIO_DEFAULT, /* S0_NC22 - XDP_GPIO_S0_NC22 */ + GPIO_DEFAULT, /* S0_NC23 - XDP_GPIO_S0_NC23 */ + GPIO_NC, /* S0_NC24 - NC */ + GPIO_NC, /* S0_NC25 - NC */ + GPIO_NC, /* S0_NC26 - NC */ + GPIO_END +}; + +/* SCORE GPIOs */ +static const struct soc_gpio_map gpscore_gpio_map[] = { + GPIO_ACPI_SCI, /* S0_SC000 - SOC_KBC_SCI - INT */ + GPIO_FUNC2, /* S0_SC001 - SATA_DEVSLP_C */ + GPIO_NC, /* S0-SC002 - SATA_LED_R_N (NC/PU) */ + GPIO_FUNC1, /* S0-SC003 - PCIE_CLKREQ_IMAGE# */ + GPIO_FUNC1, /* S0-SC004 - PCIE_CLKREQ_WLAN# */ + GPIO_NC, /* S0-SC005 - PCIE_CLKREQ_LAN# (NC) */ + GPIO_NC, /* S0-SC006 - PCIE_CLKREQ3# (NC) */ + GPIO_FUNC(2, PULL_DISABLE, 10K), /* S0-SC007 - SD3_WP external pull */ + GPIO_NC, /* S0-SC008 - ACZ_RST# (NC) */ + GPIO_NC, /* S0-SC009 - ACZ_SYNC (NC) */ + GPIO_NC, /* S0-SC010 - ACZ_BCLK (NC) */ + GPIO_NC, /* S0-SC011 - ACZ_STDOUT (NC) */ + GPIO_NC, /* S0-SC012 - PCH_AZ_CODEC_SDIN0 (NC) */ + GPIO_NC, /* S0-SC013 - NC */ + GPIO_INPUT, /* S0-SC014 - DET_TRIGGER - INT */ + GPIO_INPUT, /* S0-SC015 - AJACK_MICPRES_L - INT */ + GPIO_FUNC(3, PULL_DOWN, 20K), /* S0-SC016 - MMC1_45_CLK */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC017 - MMC1_45_D[0] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC018 - MMC1_45_D[1] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC019 - MMC1_45_D[2] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC020 - MMC1_45_D[3] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC021 - MMC1_45_D[4] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC022 - MMC1_45_D[5] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC023 - MMC1_45_D[6] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC024 - MMC1_45_D[7] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC025 - MMC1_45_CMD */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC026 - MMC1_45_RST */ + GPIO_NC, /* S0-SC027 - NC */ + GPIO_NC, /* S0-SC028 - NC */ + GPIO_NC, /* S0-SC029 - NC */ + GPIO_NC, /* S0-SC030 - NC */ + GPIO_NC, /* S0-SC031 - NC */ + GPIO_NC, /* S0-SC032 - NC */ + GPIO_FUNC(1, PULL_DOWN, 20K), /* S0-SC033 - SD3_CLK */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC034 - SD3_D0 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC035 - SD3_D1 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC036 - SD3_D2 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC037 - SD3_D3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC038 - SD3_CD# */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC039 - SD3_CMD */ + GPIO_NC, /* S0-SC040 - SDMMC3_1P8_EN - TP3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC041 - SDIO3_PWR_EN# */ + GPIO_FUNC1, /* S0-SC042 - LPC_LAD0 */ + GPIO_FUNC1, /* S0-SC043 - LPC-LAD1 */ + GPIO_FUNC1, /* S0-SC044 - LPC_LAD2 */ + GPIO_FUNC1, /* S0-SC045 - LPC_LAD3 */ + GPIO_FUNC1, /* S0-SC046 - LPC_LFRAME# */ + GPIO_FUNC1, /* S0-SC047 - PCLK_TPM */ + GPIO_FUNC1, /* S0-SC048 - CLK_PCI_EC */ + GPIO_FUNC1, /* S0-SC049 - LPC_CLKRUN_L */ + GPIO_NC, /* S0-SC050 - IRQ_SERIRQ */ + GPIO_NC, /* S0-SC051 - SMB_SOC_DATA (XDP) */ + GPIO_NC, /* S0-SC052 - SMB_SOC_CLK (XDP) */ + GPIO_NC, /* S0-SC053 - SMB_SOC_ALERTB (NC) */ + GPIO_DEFAULT, /* S0-SC054 - NC */ + GPIO_DIRQ, /* S0-SC055 - TRACKPAD_INT_DX */ + GPIO_INPUT, /* S0-SC056 - GPIO_S0_SC_56 - STRAP */ + GPIO_FUNC1, /* S0-SC057 - PCH_UART_TXD */ + GPIO_INPUT, /* S0-SC058 - SIM_DET_C */ + GPIO_INPUT_LEGACY, /* S0-SC059 - EC_IN_RW_C */ + GPIO_NC, /* S0-SC060 - NC */ + GPIO_FUNC1, /* S0-SC061 - SOC_UART_RX */ + GPIO_FUNC1, /* S0-SC062 - I2S_BCLK */ + GPIO_FUNC1, /* S0-SC063 - I2S_LRCLK */ + GPIO_FUNC1, /* S0-SC064 - I2S_DIN */ + GPIO_FUNC1, /* S0-SC065 - I2S_DOUT */ + GPIO_FUNC1, /* S0-SC066 - SIO_SPI_CS# */ + GPIO_FUNC1, /* S0-SC067 - SIO_SPI_MISO */ + GPIO_FUNC1, /* S0-SC068 - SIO_SPI_MOSI */ + GPIO_FUNC1, /* S0-SC069 - SIO_SPI_CLK */ + GPIO_NC, /* S0-SC070 - ALS_INT_L - INT (NC) */ + GPIO_NC, /* S0-SC071 - NC */ + GPIO_DIRQ, /* S0-SC072 - TOUCH_INT_L_DX */ + GPIO_NC, /* S0-SC073 - NC */ + GPIO_NC, /* S0-SC074 - SIO_UART2_RXD (NC) */ + GPIO_NC, /* S0-SC075 - SIO_UART2_TXD (NC) */ + GPIO_INPUT, /* S0-SC076 - BIOS_STRAP - STRAP */ + GPIO_INPUT, /* S0-SC077 - SOC_OVERRIDE - STRAP */ + GPIO_FUNC1, /* S0-SC078 - I2C_0_SDA */ + GPIO_FUNC1, /* S0-SC079 - I2C_0_SCL */ + GPIO_FUNC1, /* S0-SC080 - I2C_1_SDA */ + GPIO_FUNC1, /* S0-SC081 - I2C_1_SCL */ + GPIO_NC, /* S0-SC082 - NC */ + GPIO_NC, /* S0-SC083 - NC */ + GPIO_NC, /* S0-SC084 - NC */ + GPIO_NC, /* S0-SC085 - NC */ + GPIO_NC, /* S0-SC086 - I2C_4_SDA */ + GPIO_NC, /* S0-SC087 - I2C_4_SCL */ + GPIO_NC, /* S0-SC088 - I2C_5_SDA */ + GPIO_NC, /* S0-SC089 - I2C_5_SCL */ + GPIO_NC, /* S0-SC090 - NC */ + GPIO_NC, /* S0-SC091 - NC */ + GPIO_NC, /* S0-SC092 - I2C_NGFF_SDA (NC/PU) */ + GPIO_NC, /* S0-SC093 - I2C_NGFF_SCL (NC/PU) */ + GPIO_NC, /* S0-SC094 - NC */ + GPIO_NC, /* S0-SC095 - SIO_PWM1 (NC) */ + GPIO_FUNC1, /* S0-SC096 - I2S_MCLK */ + GPIO_NC, /* S0-SC097 - NC */ + GPIO_NC, /* S0-SC098 - NC */ + GPIO_NC, /* S0-SC099 - NC */ + GPIO_NC, /* S0-SC100 - NC */ + GPIO_DIRQ, /* S0-SC101 - KBD_IRQ# */ + GPIO_END +}; + +/* SSUS GPIOs */ +static const struct soc_gpio_map gpssus_gpio_map[] = { + GPIO_ACPI_WAKE, /* S500 - PCH_WAKE# */ + GPIO_ACPI_WAKE, /* S501 - TRACKPAD_INT# - INT */ + GPIO_NC, /* S502 - TOUCH_INT# - INT */ + GPIO_NC, /* S503 - LTE_WAKE_L# - INT */ + GPIO_NC, /* S504 - SOC_JTAG2_TDO (NC/PU) */ + GPIO_NC, /* S505 - SUS_CLK_WLAN (NC) */ + GPIO_INPUT_PU, /* S506 - PCH_SPI_WP */ + GPIO_ACPI_SMI, /* S507 - SOC_KBC_SMI - INT */ + GPIO_NC, /* S508 - NC */ + GPIO_DIRQ, /* S509 - MUX_AUD_INT1# */ + GPIO_OUT_HIGH, /* S510 - WIFI_DISABLE_L */ + GPIO_FUNC0, /* S511 - SUSPWRDNACK */ + GPIO_FUNC0, /* S512 - WIFI_SUSCLK */ + GPIO_FUNC0, /* S513 - SLP_SX */ + GPIO_NC, /* S514 - NC */ + GPIO_FUNC0, /* S515 - WLAN_WAKE_L - INT */ + GPIO_FUNC0, /* S516 - PCH_PWRBTN_L */ + GPIO_NC, /* S517 - NC */ + GPIO_FUNC0, /* S518 - SUS_STAT# */ + GPIO_FUNC0, /* S519 - USB_OC0# */ + GPIO_FUNC0, /* S520 - USB_OC1# */ + GPIO_NC, /* S521 - NC */ + GPIO_NC, /* S522 - XDP_GPIO_DFX0 */ + GPIO_NC, /* S523 - XDP_GPIO_DFX1 */ + GPIO_NC, /* S524 - XDP_GPIO_DFX2 */ + GPIO_NC, /* S525 - XDP_GPIO_DFX3 */ + GPIO_NC, /* S526 - XDP_GPIO_DFX4 */ + GPIO_NC, /* S527 - XDP_GPIO_DFX5 */ + GPIO_NC, /* S528 - XDP_GPIO_DFX6 */ + GPIO_NC, /* S529 - XDP_GPIO_DFX7 */ + GPIO_NC, /* S530 - XDP_GPIO_DFX8 */ + GPIO_NC, /* S531 - NC */ + GPIO_NC, /* S532 - NC */ + GPIO_NC, /* S533 - NC */ + GPIO_NC, /* S534 - NC */ + GPIO_OUT_HIGH, /* S535 - LTE_DISABLE_L */ + GPIO_NC, /* S536 - NC */ + GPIO_INPUT, /* S537 - RAM_ID0 */ + GPIO_INPUT, /* S538 - RAM_ID1 */ + GPIO_INPUT, /* S539 - RAM_ID2 */ + GPIO_NC, /* S540 - NC */ + GPIO_NC, /* S541 - NC */ + GPIO_NC, /* S542 - NC */ + GPIO_NC, /* S543 - NC */ + GPIO_END +}; + +static const u8 core_dedicated_irq[GPIO_MAX_DIRQS] = { + [TPAD_IRQ_OFFSET] = TPAD_IRQ_GPIO, + [TOUCH_IRQ_OFFSET] = TOUCH_IRQ_GPIO, + [I8042_IRQ_OFFSET] = I8042_IRQ_GPIO, +}; + +static const u8 sus_dedicated_irq[GPIO_MAX_DIRQS] = { + [CODEC_IRQ_OFFSET] = CODEC_IRQ_GPIO, +}; + +static struct soc_gpio_config gpio_config = { + .ncore = gpncore_gpio_map, + .score = gpscore_gpio_map, + .ssus = gpssus_gpio_map, + .core_dirq = &core_dedicated_irq, + .sus_dirq = &sus_dedicated_irq, +}; + +struct soc_gpio_config* mainboard_get_gpios(void) +{ + return &gpio_config; +} diff --git a/src/mainboard/google/rambi/variants/orco/include/variant/acpi/dptf.asl b/src/mainboard/google/rambi/variants/orco/include/variant/acpi/dptf.asl new file mode 100644 index 0000000..3530d7b --- /dev/null +++ b/src/mainboard/google/rambi/variants/orco/include/variant/acpi/dptf.asl @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define DPTF_CPU_PASSIVE 80 +#define DPTF_CPU_CRITICAL 90 + +#define DPTF_TSR0_SENSOR_ID 1 +#define DPTF_TSR0_SENSOR_NAME "TMP432_Internal" +#define DPTF_TSR0_PASSIVE 48 +#define DPTF_TSR0_CRITICAL 70 + +#define DPTF_TSR1_SENSOR_ID 2 +#define DPTF_TSR1_SENSOR_NAME "TMP432_Power_top" +#define DPTF_TSR1_PASSIVE 60 +#define DPTF_TSR1_CRITICAL 70 + +#define DPTF_TSR2_SENSOR_ID 3 +#define DPTF_TSR2_SENSOR_NAME "TMP432_CPU_bottom" +#define DPTF_TSR2_PASSIVE 55 +#define DPTF_TSR2_CRITICAL 70 + +#define DPTF_ENABLE_CHARGER + +/* Charger performance states, board-specific values from charger and EC */ +Name (CHPS, Package () { + Package () { 0, 0, 0, 0, 255, 0x6a4, "mA", 0 }, /* 1.7A (MAX) */ + Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 }, /* 1.5A */ + Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 }, /* 1.0A */ + Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 }, /* 0.5A */ + Package () { 0, 0, 0, 0, 0, 0x080, "mA", 0 }, /* 0.128A */ +}) diff --git a/src/mainboard/google/rambi/variants/orco/include/variant/acpi/mainboard.asl b/src/mainboard/google/rambi/variants/orco/include/variant/acpi/mainboard.asl new file mode 100644 index 0000000..3cdd5c0 --- /dev/null +++ b/src/mainboard/google/rambi/variants/orco/include/variant/acpi/mainboard.asl @@ -0,0 +1,16 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Elan trackpad */ +#include <mainboard/google/rambi/acpi/trackpad_elan.asl> diff --git a/src/mainboard/google/rambi/variants/orco/include/variant/onboard.h b/src/mainboard/google/rambi/variants/orco/include/variant/onboard.h new file mode 100644 index 0000000..b4a6c6e --- /dev/null +++ b/src/mainboard/google/rambi/variants/orco/include/variant/onboard.h @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ONBOARD_H +#define ONBOARD_H + +#include <mainboard/google/rambi/irqroute.h> + +/* PCH wake signal from EC. */ +#define BOARD_PCH_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(0) + +#define BOARD_TRACKPAD_NAME "trackpad" +#define BOARD_TRACKPAD_IRQ GPIO_S0_DED_IRQ(TPAD_IRQ_OFFSET) +#define BOARD_TRACKPAD_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(1) +#define BOARD_TRACKPAD_I2C_BUS 0 +#define BOARD_TRACKPAD_I2C_ADDR 0x15 + +#define BOARD_I8042_IRQ GPIO_S0_DED_IRQ(I8042_IRQ_OFFSET) +#define BOARD_CODEC_IRQ GPIO_S5_DED_IRQ(CODEC_IRQ_OFFSET) + +#endif diff --git a/src/mainboard/google/rambi/variants/orco/include/variant/variant.h b/src/mainboard/google/rambi/variants/orco/include/variant/variant.h new file mode 100644 index 0000000..ab81162 --- /dev/null +++ b/src/mainboard/google/rambi/variants/orco/include/variant/variant.h @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef VARIANT_H +#define VARIANT_H + +/* + * RAM_ID[2:0] are on GPIO_SSUS[39:37] + * 0b000 - 4GiB total - 2 x 2GiB Micron MT41K256M16HA-125:E 1600MHz + * 0b001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + * 0b010 - 2GiB total - 2 x 1GiB Micron MT41K128M16JT-125:K 1600MHz + * 0b011 - 2GiB total - 2 x 1GiB Hynix H5TC2G63FFR-PBA 1600MHz + * 0b100 - 2GiB total - 1 x 2GiB Micron MT41K256M16HA-125:E 1600MHz + * 0b101 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + * 0b110 - 4GiB total - 2 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz + * 0b111 - 2GiB total - 1 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz + */ + +static const uint32_t dual_channel_config = + (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 6); + +#define SPD_SIZE 256 +#define GPIO_SSUS_37_PAD 57 +#define GPIO_SSUS_38_PAD 50 +#define GPIO_SSUS_39_PAD 58 + +#endif diff --git a/src/mainboard/google/rambi/variants/quawks/Makefile.inc b/src/mainboard/google/rambi/variants/quawks/Makefile.inc new file mode 100644 index 0000000..48956a1 --- /dev/null +++ b/src/mainboard/google/rambi/variants/quawks/Makefile.inc @@ -0,0 +1,49 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +SPD_BIN = $(obj)/spd.bin + +# Order matters for SPD sources. The following indicies +# define the SPD data to use. +# 0b000 - 4GiB total - 2 x 2GiB Elpida EDJ4216EFBG-GNL-F 1600MHz +# 0b001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz +# 0b010 - 4GiB total - 2 x 2GiB Hynix H5TC4G63CFR-PBA 1600MHz +# 0b011 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBR 1600MHz +# 0b100 - 2GiB total - 1 x 2GiB Elpida EDJ4216EFBG-GNL-F 1600MHz +# 0b101 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz +# 0b110 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBR 1600MHz +# 0b111 - 2GiB total - 1 x 2GiB Hynix H5TC4G63CFR-PBA 1600MHz +SPD_SOURCES = elpida_2GiB_dimm_EDJ4216EFBG-GNL-F +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += Hynix_HMT425S6CFR6A_H5TC4G63CFR +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += elpida_2GiB_dimm_EDJ4216EFBG-GNL-F +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += Hynix_HMT425S6CFR6A_H5TC4G63CFR + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex) + +# Include spd ROM data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/google/rambi/variants/quawks/devicetree.cb b/src/mainboard/google/rambi/variants/quawks/devicetree.cb new file mode 100644 index 0000000..cc5146d --- /dev/null +++ b/src/mainboard/google/rambi/variants/quawks/devicetree.cb @@ -0,0 +1,98 @@ +chip soc/intel/baytrail + + # SATA port enable mask (2 ports) + register "sata_port_map" = "0x1" + register "sata_ahci" = "0x1" + register "ide_legacy_combined" = "0x0" + + # Route USB ports to XHCI + register "usb_route_to_xhci" = "1" + + # USB Port Disable Mask + register "usb2_port_disable_mask" = "0x0" + register "usb3_port_disable_mask" = "0x0" + + # USB PHY settings + # TODO: These values are from Baytrail and need tuned for Quawks board + register "usb2_per_port_lane0" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" + register "usb2_per_port_lane1" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" + register "usb2_per_port_lane2" = "0x00049209" + register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" + register "usb2_per_port_lane3" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" + + # LPE audio codec settings + register "lpe_codec_clk_freq" = "25" # 25MHz clock + register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] + + # SD Card controller + register "sdcard_cap_low" = "0x036864b2" + register "sdcard_cap_high" = "0x0" + + # Enable devices in ACPI mode + register "lpe_acpi_mode" = "1" + register "lpss_acpi_mode" = "1" + register "scc_acpi_mode" = "1" + + # Enable PIPEA as DP_C + register "gpu_pipea_port_select" = "2" # DP_C + register "gpu_pipea_power_cycle_delay" = "6" # 600ms + register "gpu_pipea_power_on_delay" = "5000" # 500ms + register "gpu_pipea_light_on_delay" = "70" # 7ms + register "gpu_pipea_power_off_delay" = "500" # 50ms + register "gpu_pipea_light_off_delay" = "2000" # 200ms + + # VR PS2 control + register "vnn_ps2_enable" = "1" + register "vcc_ps2_enable" = "1" + + # Disable SLP_X stretching after SUS power well fail. + register "disable_slp_x_stretch_sus_fail" = "1" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # SoC router + device pci 02.0 on end # GFX + device pci 11.0 off end # SDIO + device pci 12.0 on end # SD + device pci 13.0 on end # SATA + device pci 14.0 on end # XHCI + device pci 15.0 on end # LPE + device pci 17.0 on end # MMC + device pci 18.0 on end # SIO_DMA1 + device pci 18.1 on end # I2C1 + device pci 18.2 on end # I2C2 + device pci 18.3 off end # I2C3 + device pci 18.4 off end # I2C4 + device pci 18.5 on end # I2C5 + device pci 18.6 off end # I2C6 + device pci 18.7 off end # I2C7 + device pci 1a.0 on end # TXE + device pci 1b.0 on end # HDA + device pci 1c.0 on end # PCIE_PORT1 + device pci 1c.1 on end # PCIE_PORT2 + device pci 1c.2 off end # PCIE_PORT3 + device pci 1c.3 off end # PCIE_PORT4 + device pci 1d.0 on end # EHCI + device pci 1e.0 on end # SIO_DMA2 + device pci 1e.1 off end # PWM1 + device pci 1e.2 off end # PWM2 + device pci 1e.3 off end # HSUART1 + device pci 1e.4 off end # HSUART2 + device pci 1e.5 off end # SPI + device pci 1f.0 on + chip ec/google/chromeec + # We only have one init function that + # we need to call to initialize the + # keyboard part of the EC. + device pnp ff.1 on # dummy address + end + end + end # LPC Bridge + device pci 1f.3 off end # SMBus + end +end diff --git a/src/mainboard/google/rambi/variants/quawks/gpio.c b/src/mainboard/google/rambi/variants/quawks/gpio.c new file mode 100644 index 0000000..3d79d37 --- /dev/null +++ b/src/mainboard/google/rambi/variants/quawks/gpio.c @@ -0,0 +1,230 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdlib.h> +#include <soc/gpio.h> +#include <mainboard/google/rambi/irqroute.h> + +/* NCORE GPIOs */ +static const struct soc_gpio_map gpncore_gpio_map[] = { + GPIO_FUNC2, /* S0_NC00 - INT_HDMI_HPD - INT */ + GPIO_FUNC2, /* S0_NC01 - HDMI_DDCDATA_SW */ + GPIO_FUNC2, /* S0_NC02 - HDMI_DDCCLK_SW */ + GPIO_NC, /* S0_NC03 - NC */ + GPIO_NC, /* S0_NC04 - NC */ + GPIO_NC, /* S0_NC05 - NC */ + GPIO_FUNC2, /* S0_NC06 - EDP_HPD_L */ + GPIO_INPUT, /* S0_NC07 - DDI1_DDCDATA - STRAP */ + GPIO_NC, /* S0_NC08 - NC */ + GPIO_OUT_HIGH, /* S0_NC09 - SOC_DISP_ON_C */ + GPIO_FUNC2, /* S0_NC10 - SOC_EDP_BLON_C */ + GPIO_FUNC2, /* S0_NC11 - SOC_DPST_PWM_C */ + GPIO_NC, /* S0_NC12 - NC */ + GPIO_INPUT, /* S0_NC13 - GPIO_NC13 - STRAP */ + GPIO_NC, /* S0_NC14 - NC */ + GPIO_DEFAULT, /* S0_NC15 - XDP_GPIO_S0_NC15 */ + GPIO_DEFAULT, /* S0_NC16 - XDP_GPIO_S0_NC16 */ + GPIO_DEFAULT, /* S0_NC17 - XDP_GPIO_S0_NC17 */ + GPIO_DEFAULT, /* S0_NC18 - XDP_GPIO_S0_NC18 */ + GPIO_DEFAULT, /* S0_NC19 - XDP_GPIO_S0_NC19 */ + GPIO_DEFAULT, /* S0_NC20 - XDP_GPIO_S0_NC20 */ + GPIO_DEFAULT, /* S0_NC21 - XDP_GPIO_S0_NC21 */ + GPIO_DEFAULT, /* S0_NC22 - XDP_GPIO_S0_NC22 */ + GPIO_DEFAULT, /* S0_NC23 - XDP_GPIO_S0_NC23 */ + GPIO_NC, /* S0_NC24 - NC */ + GPIO_NC, /* S0_NC25 - NC */ + GPIO_NC, /* S0_NC26 - NC */ + GPIO_END +}; + +/* SCORE GPIOs */ +static const struct soc_gpio_map gpscore_gpio_map[] = { + GPIO_ACPI_SCI, /* S0_SC000 - SOC_KBC_SCI - INT */ + GPIO_FUNC2, /* S0_SC001 - SATA_DEVSLP_C */ + GPIO_NC, /* S0-SC002 - SATA_LED_R_N (NC/PU) */ + GPIO_FUNC1, /* S0-SC003 - PCIE_CLKREQ_IMAGE# */ + GPIO_FUNC1, /* S0-SC004 - PCIE_CLKREQ_WLAN# */ + GPIO_NC, /* S0-SC005 - PCIE_CLKREQ_LAN# (NC) */ + GPIO_NC, /* S0-SC006 - PCIE_CLKREQ3# (NC) */ + GPIO_FUNC(2, PULL_DISABLE, 10K), /* S0-SC007 - SD3_WP external pull */ + GPIO_NC, /* S0-SC008 - ACZ_RST# (NC) */ + GPIO_NC, /* S0-SC009 - ACZ_SYNC (NC) */ + GPIO_NC, /* S0-SC010 - ACZ_BCLK (NC) */ + GPIO_NC, /* S0-SC011 - ACZ_STDOUT (NC) */ + GPIO_NC, /* S0-SC012 - PCH_AZ_CODEC_SDIN0 (NC) */ + GPIO_NC, /* S0-SC013 - NC */ + GPIO_INPUT, /* S0-SC014 - DET_TRIGGER - INT */ + GPIO_INPUT, /* S0-SC015 - AJACK_MICPRES_L - INT */ + GPIO_FUNC(3, PULL_DOWN, 20K), /* S0-SC016 - MMC1_45_CLK */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC017 - MMC1_45_D[0] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC018 - MMC1_45_D[1] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC019 - MMC1_45_D[2] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC020 - MMC1_45_D[3] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC021 - MMC1_45_D[4] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC022 - MMC1_45_D[5] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC023 - MMC1_45_D[6] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC024 - MMC1_45_D[7] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC025 - MMC1_45_CMD */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC026 - MMC1_45_RST */ + GPIO_NC, /* S0-SC027 - NC */ + GPIO_NC, /* S0-SC028 - NC */ + GPIO_NC, /* S0-SC029 - NC */ + GPIO_NC, /* S0-SC030 - NC */ + GPIO_NC, /* S0-SC031 - NC */ + GPIO_NC, /* S0-SC032 - NC */ + GPIO_FUNC(1, PULL_DOWN, 20K), /* S0-SC033 - SD3_CLK */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC034 - SD3_D0 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC035 - SD3_D1 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC036 - SD3_D2 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC037 - SD3_D3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC038 - SD3_CD# */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC039 - SD3_CMD */ + GPIO_NC, /* S0-SC040 - SDMMC3_1P8_EN - TP3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC041 - SDIO3_PWR_EN# */ + GPIO_FUNC1, /* S0-SC042 - LPC_LAD0 */ + GPIO_FUNC1, /* S0-SC043 - LPC-LAD1 */ + GPIO_FUNC1, /* S0-SC044 - LPC_LAD2 */ + GPIO_FUNC1, /* S0-SC045 - LPC_LAD3 */ + GPIO_FUNC1, /* S0-SC046 - LPC_LFRAME# */ + GPIO_FUNC1, /* S0-SC047 - PCLK_TPM */ + GPIO_FUNC1, /* S0-SC048 - CLK_PCI_EC */ + GPIO_FUNC1, /* S0-SC049 - LPC_CLKRUN_L */ + GPIO_NC, /* S0-SC050 - IRQ_SERIRQ */ + GPIO_NC, /* S0-SC051 - SMB_SOC_DATA (XDP) */ + GPIO_NC, /* S0-SC052 - SMB_SOC_CLK (XDP) */ + GPIO_NC, /* S0-SC053 - SMB_SOC_ALERTB (NC) */ + GPIO_DEFAULT, /* S0-SC054 - NC */ + GPIO_DIRQ, /* S0-SC055 - TRACKPAD_INT_DX */ + GPIO_INPUT, /* S0-SC056 - GPIO_S0_SC_56 - STRAP */ + GPIO_FUNC1, /* S0-SC057 - PCH_UART_TXD */ + GPIO_INPUT, /* S0-SC058 - SIM_DET_C */ + GPIO_INPUT_LEGACY, /* S0-SC059 - EC_IN_RW_C */ + GPIO_NC, /* S0-SC060 - NC */ + GPIO_FUNC1, /* S0-SC061 - SOC_UART_RX */ + GPIO_FUNC1, /* S0-SC062 - I2S_BCLK */ + GPIO_FUNC1, /* S0-SC063 - I2S_LRCLK */ + GPIO_FUNC1, /* S0-SC064 - I2S_DIN */ + GPIO_FUNC1, /* S0-SC065 - I2S_DOUT */ + GPIO_FUNC1, /* S0-SC066 - SIO_SPI_CS# */ + GPIO_FUNC1, /* S0-SC067 - SIO_SPI_MISO */ + GPIO_FUNC1, /* S0-SC068 - SIO_SPI_MOSI */ + GPIO_FUNC1, /* S0-SC069 - SIO_SPI_CLK */ + GPIO_DIRQ, /* S0-SC070 - ALS_INT_L - INT */ + GPIO_NC, /* S0-SC071 - NC */ + GPIO_DIRQ, /* S0-SC072 - TOUCH_INT_L_DX */ + GPIO_NC, /* S0-SC073 - NC */ + GPIO_NC, /* S0-SC074 - SIO_UART2_RXD (NC) */ + GPIO_NC, /* S0-SC075 - SIO_UART2_TXD (NC) */ + GPIO_INPUT, /* S0-SC076 - BIOS_STRAP - STRAP */ + GPIO_INPUT, /* S0-SC077 - SOC_OVERRIDE - STRAP */ + GPIO_FUNC1, /* S0-SC078 - I2C_0_SDA */ + GPIO_FUNC1, /* S0-SC079 - I2C_0_SCL */ + GPIO_FUNC1, /* S0-SC080 - I2C_1_SDA */ + GPIO_FUNC1, /* S0-SC081 - I2C_1_SCL */ + GPIO_NC, /* S0-SC082 - NC */ + GPIO_NC, /* S0-SC083 - NC */ + GPIO_NC, /* S0-SC084 - NC */ + GPIO_NC, /* S0-SC085 - NC */ + GPIO_FUNC1, /* S0-SC086 - I2C_4_SDA */ + GPIO_FUNC1, /* S0-SC087 - I2C_4_SCL */ + GPIO_FUNC1, /* S0-SC088 - I2C_5_SDA */ + GPIO_FUNC1, /* S0-SC089 - I2C_5_SCL */ + GPIO_NC, /* S0-SC090 - NC */ + GPIO_NC, /* S0-SC091 - NC */ + GPIO_NC, /* S0-SC092 - I2C_NGFF_SDA (NC/PU) */ + GPIO_NC, /* S0-SC093 - I2C_NGFF_SCL (NC/PU) */ + GPIO_NC, /* S0-SC094 - NC */ + GPIO_NC, /* S0-SC095 - SIO_PWM1 (NC) */ + GPIO_FUNC1, /* S0-SC096 - I2S_MCLK */ + GPIO_NC, /* S0-SC097 - NC */ + GPIO_NC, /* S0-SC098 - NC */ + GPIO_NC, /* S0-SC099 - NC */ + GPIO_NC, /* S0-SC100 - NC */ + GPIO_DIRQ, /* S0-SC101 - KBD_IRQ# */ + GPIO_END +}; + +/* SSUS GPIOs */ +static const struct soc_gpio_map gpssus_gpio_map[] = { + GPIO_ACPI_WAKE, /* S500 - PCH_WAKE# */ + GPIO_ACPI_WAKE, /* S501 - TRACKPAD_INT# - INT */ + GPIO_ACPI_WAKE, /* S502 - TOUCH_INT# - INT */ + GPIO_FUNC6, /* S503 - LTE_WAKE_L# - INT */ + GPIO_NC, /* S504 - SOC_JTAG2_TDO (NC/PU) */ + GPIO_FUNC1, /* S505 - SUS_CLK_WLAN (NC) */ + GPIO_INPUT_PU, /* S506 - PCH_SPI_WP */ + GPIO_ACPI_SMI, /* S507 - SOC_KBC_SMI - INT */ + GPIO_NC, /* S508 - NC */ + GPIO_DIRQ, /* S509 - MUX_AUD_INT1# */ + GPIO_OUT_HIGH, /* S510 - WIFI_DISABLE_L */ + GPIO_FUNC0, /* S511 - SUSPWRDNACK */ + GPIO_FUNC0, /* S512 - WIFI_SUSCLK */ + GPIO_FUNC0, /* S513 - SLP_SX */ + GPIO_NC, /* S514 - NC */ + GPIO_FUNC0, /* S515 - WLAN_WAKE_L - INT */ + GPIO_FUNC0, /* S516 - PCH_PWRBTN_L */ + GPIO_NC, /* S517 - NC */ + GPIO_FUNC0, /* S518 - SUS_STAT# */ + GPIO_FUNC0, /* S519 - USB_OC0# */ + GPIO_FUNC0, /* S520 - USB_OC1# */ + GPIO_NC, /* S521 - NC */ + GPIO_NC, /* S522 - XDP_GPIO_DFX0 */ + GPIO_NC, /* S523 - XDP_GPIO_DFX1 */ + GPIO_NC, /* S524 - XDP_GPIO_DFX2 */ + GPIO_NC, /* S525 - XDP_GPIO_DFX3 */ + GPIO_NC, /* S526 - XDP_GPIO_DFX4 */ + GPIO_NC, /* S527 - XDP_GPIO_DFX5 */ + GPIO_NC, /* S528 - XDP_GPIO_DFX6 */ + GPIO_NC, /* S529 - XDP_GPIO_DFX7 */ + GPIO_NC, /* S530 - XDP_GPIO_DFX8 */ + GPIO_NC, /* S531 - NC */ + GPIO_NC, /* S532 - NC */ + GPIO_NC, /* S533 - NC */ + GPIO_NC, /* S534 - NC */ + GPIO_OUT_HIGH, /* S535 - LTE_DISABLE_L */ + GPIO_NC, /* S536 - NC */ + GPIO_INPUT, /* S537 - RAM_ID0 */ + GPIO_INPUT, /* S538 - RAM_ID1 */ + GPIO_INPUT, /* S539 - RAM_ID2 */ + GPIO_NC, /* S540 - NC */ + GPIO_NC, /* S541 - NC */ + GPIO_NC, /* S542 - NC */ + GPIO_NC, /* S543 - NC */ + GPIO_END +}; + +static const u8 core_dedicated_irq[GPIO_MAX_DIRQS] = { + [TPAD_IRQ_OFFSET] = TPAD_IRQ_GPIO, + [TOUCH_IRQ_OFFSET] = TOUCH_IRQ_GPIO, + [I8042_IRQ_OFFSET] = I8042_IRQ_GPIO, + [ALS_IRQ_OFFSET] = ALS_IRQ_GPIO, +}; + +static const u8 sus_dedicated_irq[GPIO_MAX_DIRQS] = { + [CODEC_IRQ_OFFSET] = CODEC_IRQ_GPIO, +}; + +static struct soc_gpio_config gpio_config = { + .ncore = gpncore_gpio_map, + .score = gpscore_gpio_map, + .ssus = gpssus_gpio_map, + .core_dirq = &core_dedicated_irq, + .sus_dirq = &sus_dedicated_irq, +}; + +struct soc_gpio_config* mainboard_get_gpios(void) +{ + return &gpio_config; +} diff --git a/src/mainboard/google/rambi/variants/quawks/include/variant/acpi/dptf.asl b/src/mainboard/google/rambi/variants/quawks/include/variant/acpi/dptf.asl new file mode 100644 index 0000000..7e36946 --- /dev/null +++ b/src/mainboard/google/rambi/variants/quawks/include/variant/acpi/dptf.asl @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define DPTF_CPU_PASSIVE 80 +#define DPTF_CPU_CRITICAL 90 + +#define DPTF_TSR0_SENSOR_ID 1 +#define DPTF_TSR0_SENSOR_NAME "TMP432_Internal" +#define DPTF_TSR0_PASSIVE 52 +#define DPTF_TSR0_CRITICAL 75 + +#define DPTF_TSR1_SENSOR_ID 2 +#define DPTF_TSR1_SENSOR_NAME "TMP432_Power_top" +#define DPTF_TSR1_PASSIVE 51 +#define DPTF_TSR1_CRITICAL 75 + +#define DPTF_TSR2_SENSOR_ID 3 +#define DPTF_TSR2_SENSOR_NAME "TMP432_CPU_bottom" +#define DPTF_TSR2_PASSIVE 51 +#define DPTF_TSR2_CRITICAL 75 + +#define DPTF_ENABLE_CHARGER + +/* Charger performance states, board-specific values from charger and EC */ +Name (CHPS, Package () { + Package () { 0, 0, 0, 0, 255, 0x6A4, "mA", 0 }, /* 1.7A (MAX) */ + Package () { 0, 0, 0, 0, 24, 0x320, "mA", 0 }, /* 0.8A */ + Package () { 0, 0, 0, 0, 16, 0x258, "mA", 0 }, /* 0.6A */ + Package () { 0, 0, 0, 0, 8, 0x190, "mA", 0 }, /* 0.4A */ + Package () { 0, 0, 0, 0, 0, 0x64, "mA", 0 }, /* 0.1A */ +}) diff --git a/src/mainboard/google/rambi/variants/quawks/include/variant/acpi/mainboard.asl b/src/mainboard/google/rambi/variants/quawks/include/variant/acpi/mainboard.asl new file mode 100644 index 0000000..3cdd5c0 --- /dev/null +++ b/src/mainboard/google/rambi/variants/quawks/include/variant/acpi/mainboard.asl @@ -0,0 +1,16 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Elan trackpad */ +#include <mainboard/google/rambi/acpi/trackpad_elan.asl> diff --git a/src/mainboard/google/rambi/variants/quawks/include/variant/onboard.h b/src/mainboard/google/rambi/variants/quawks/include/variant/onboard.h new file mode 100644 index 0000000..4bb37be --- /dev/null +++ b/src/mainboard/google/rambi/variants/quawks/include/variant/onboard.h @@ -0,0 +1,34 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ONBOARD_H +#define ONBOARD_H + +#include <mainboard/google/rambi/irqroute.h> + +/* PCH wake signal from EC. */ +#define BOARD_PCH_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(0) + +#define BOARD_TRACKPAD_NAME "trackpad" +#define BOARD_TRACKPAD_IRQ GPIO_S0_DED_IRQ(TPAD_IRQ_OFFSET) +#define BOARD_TRACKPAD_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(1) +#define BOARD_TRACKPAD_I2C_BUS 0 +#define BOARD_TRACKPAD_I2C_ADDR 0x15 + +#define BOARD_I8042_IRQ GPIO_S0_DED_IRQ(I8042_IRQ_OFFSET) +#define BOARD_CODEC_IRQ GPIO_S5_DED_IRQ(CODEC_IRQ_OFFSET) +#define BOARD_ALS_IRQ GPIO_S0_DED_IRQ(ALS_IRQ_OFFSET) + +#endif diff --git a/src/mainboard/google/rambi/variants/quawks/include/variant/variant.h b/src/mainboard/google/rambi/variants/quawks/include/variant/variant.h new file mode 100644 index 0000000..2b80bf4 --- /dev/null +++ b/src/mainboard/google/rambi/variants/quawks/include/variant/variant.h @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef VARIANT_H +#define VARIANT_H + +/* + * RAM_ID[2:0] are on GPIO_SSUS[39:37] + * 0b000 - 4GiB total - 2 x 2GiB Elpida EDJ4216EFBG-GNL-F 1600MHz + * 0b001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + * 0b010 - 4GiB total - 2 x 2GiB Hynix H5TC4G63CFR-PBR 1600MHz + * 0b011 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBR 1600MHz + * 0b100 - 2GiB total - 1 x 2GiB Elpida EDJ4216EFBG-GNL-F 1600MHz + * 0b101 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + * 0b110 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBR 1600MHz + * 0b111 - 2GiB total - 1 x 2GiB Hynix H5TC4G63CFR-PBR 1600MHz + */ + +static const uint32_t dual_channel_config = + (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3); + +#define SPD_SIZE 256 +#define GPIO_SSUS_37_PAD 57 +#define GPIO_SSUS_38_PAD 50 +#define GPIO_SSUS_39_PAD 58 + +#endif diff --git a/src/mainboard/google/rambi/variants/rambi/include/variant/acpi/mainboard.asl b/src/mainboard/google/rambi/variants/rambi/include/variant/acpi/mainboard.asl index acacc5f..f4bc325 100644 --- a/src/mainboard/google/rambi/variants/rambi/include/variant/acpi/mainboard.asl +++ b/src/mainboard/google/rambi/variants/rambi/include/variant/acpi/mainboard.asl @@ -17,8 +17,8 @@ /* Elan trackpad */ #include <mainboard/google/rambi/acpi/trackpad_elan.asl> -/* Amtel trackpad */ -#include <mainboard/google/rambi/acpi/trackpad_amtel.asl> +/* Atmel trackpad */ +#include <mainboard/google/rambi/acpi/trackpad_atmel.asl> -/* Amtel touchscreen trackpad */ -#include <mainboard/google/rambi/acpi/touchscreen_amtel.asl> +/* Atmel touchscreen trackpad */ +#include <mainboard/google/rambi/acpi/touchscreen_atmel.asl> diff --git a/src/mainboard/google/rambi/variants/squawks/Makefile.inc b/src/mainboard/google/rambi/variants/squawks/Makefile.inc new file mode 100644 index 0000000..48956a1 --- /dev/null +++ b/src/mainboard/google/rambi/variants/squawks/Makefile.inc @@ -0,0 +1,49 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +SPD_BIN = $(obj)/spd.bin + +# Order matters for SPD sources. The following indicies +# define the SPD data to use. +# 0b000 - 4GiB total - 2 x 2GiB Elpida EDJ4216EFBG-GNL-F 1600MHz +# 0b001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz +# 0b010 - 4GiB total - 2 x 2GiB Hynix H5TC4G63CFR-PBA 1600MHz +# 0b011 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBR 1600MHz +# 0b100 - 2GiB total - 1 x 2GiB Elpida EDJ4216EFBG-GNL-F 1600MHz +# 0b101 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz +# 0b110 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBR 1600MHz +# 0b111 - 2GiB total - 1 x 2GiB Hynix H5TC4G63CFR-PBA 1600MHz +SPD_SOURCES = elpida_2GiB_dimm_EDJ4216EFBG-GNL-F +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += Hynix_HMT425S6CFR6A_H5TC4G63CFR +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += elpida_2GiB_dimm_EDJ4216EFBG-GNL-F +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += Hynix_HMT425S6CFR6A_H5TC4G63CFR + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex) + +# Include spd ROM data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/google/rambi/variants/squawks/devicetree.cb b/src/mainboard/google/rambi/variants/squawks/devicetree.cb new file mode 100644 index 0000000..400a551 --- /dev/null +++ b/src/mainboard/google/rambi/variants/squawks/devicetree.cb @@ -0,0 +1,98 @@ +chip soc/intel/baytrail + + # SATA port enable mask (2 ports) + register "sata_port_map" = "0x1" + register "sata_ahci" = "0x1" + register "ide_legacy_combined" = "0x0" + + # Route USB ports to XHCI + register "usb_route_to_xhci" = "1" + + # USB Port Disable Mask + register "usb2_port_disable_mask" = "0x0" + register "usb3_port_disable_mask" = "0x0" + + # USB PHY settings + # TODO: These values are from Baytrail and need tuned for Squawks board + register "usb2_per_port_lane0" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" + register "usb2_per_port_lane1" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" + register "usb2_per_port_lane2" = "0x00049209" + register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" + register "usb2_per_port_lane3" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" + + # LPE audio codec settings + register "lpe_codec_clk_freq" = "25" # 25MHz clock + register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] + + # SD Card controller + register "sdcard_cap_low" = "0x036864b2" + register "sdcard_cap_high" = "0x0" + + # Enable devices in ACPI mode + register "lpe_acpi_mode" = "1" + register "lpss_acpi_mode" = "1" + register "scc_acpi_mode" = "1" + + # Enable PIPEA as DP_C + register "gpu_pipea_port_select" = "2" # DP_C + register "gpu_pipea_power_cycle_delay" = "6" # 600ms + register "gpu_pipea_power_on_delay" = "5000" # 500ms + register "gpu_pipea_light_on_delay" = "70" # 7ms + register "gpu_pipea_power_off_delay" = "500" # 50ms + register "gpu_pipea_light_off_delay" = "2000" # 200ms + + # VR PS2 control + register "vnn_ps2_enable" = "1" + register "vcc_ps2_enable" = "1" + + # Disable SLP_X stretching after SUS power well fail. + register "disable_slp_x_stretch_sus_fail" = "1" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # SoC router + device pci 02.0 on end # GFX + device pci 11.0 off end # SDIO + device pci 12.0 on end # SD + device pci 13.0 on end # SATA + device pci 14.0 on end # XHCI + device pci 15.0 on end # LPE + device pci 17.0 on end # MMC + device pci 18.0 on end # SIO_DMA1 + device pci 18.1 on end # I2C1 + device pci 18.2 on end # I2C2 + device pci 18.3 off end # I2C3 + device pci 18.4 off end # I2C4 + device pci 18.5 on end # I2C5 + device pci 18.6 off end # I2C6 + device pci 18.7 off end # I2C7 + device pci 1a.0 on end # TXE + device pci 1b.0 on end # HDA + device pci 1c.0 on end # PCIE_PORT1 + device pci 1c.1 on end # PCIE_PORT2 + device pci 1c.2 off end # PCIE_PORT3 + device pci 1c.3 off end # PCIE_PORT4 + device pci 1d.0 on end # EHCI + device pci 1e.0 on end # SIO_DMA2 + device pci 1e.1 off end # PWM1 + device pci 1e.2 off end # PWM2 + device pci 1e.3 off end # HSUART1 + device pci 1e.4 off end # HSUART2 + device pci 1e.5 off end # SPI + device pci 1f.0 on + chip ec/google/chromeec + # We only have one init function that + # we need to call to initialize the + # keyboard part of the EC. + device pnp ff.1 on # dummy address + end + end + end # LPC Bridge + device pci 1f.3 off end # SMBus + end +end diff --git a/src/mainboard/google/rambi/variants/squawks/gpio.c b/src/mainboard/google/rambi/variants/squawks/gpio.c new file mode 100644 index 0000000..3d79d37 --- /dev/null +++ b/src/mainboard/google/rambi/variants/squawks/gpio.c @@ -0,0 +1,230 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdlib.h> +#include <soc/gpio.h> +#include <mainboard/google/rambi/irqroute.h> + +/* NCORE GPIOs */ +static const struct soc_gpio_map gpncore_gpio_map[] = { + GPIO_FUNC2, /* S0_NC00 - INT_HDMI_HPD - INT */ + GPIO_FUNC2, /* S0_NC01 - HDMI_DDCDATA_SW */ + GPIO_FUNC2, /* S0_NC02 - HDMI_DDCCLK_SW */ + GPIO_NC, /* S0_NC03 - NC */ + GPIO_NC, /* S0_NC04 - NC */ + GPIO_NC, /* S0_NC05 - NC */ + GPIO_FUNC2, /* S0_NC06 - EDP_HPD_L */ + GPIO_INPUT, /* S0_NC07 - DDI1_DDCDATA - STRAP */ + GPIO_NC, /* S0_NC08 - NC */ + GPIO_OUT_HIGH, /* S0_NC09 - SOC_DISP_ON_C */ + GPIO_FUNC2, /* S0_NC10 - SOC_EDP_BLON_C */ + GPIO_FUNC2, /* S0_NC11 - SOC_DPST_PWM_C */ + GPIO_NC, /* S0_NC12 - NC */ + GPIO_INPUT, /* S0_NC13 - GPIO_NC13 - STRAP */ + GPIO_NC, /* S0_NC14 - NC */ + GPIO_DEFAULT, /* S0_NC15 - XDP_GPIO_S0_NC15 */ + GPIO_DEFAULT, /* S0_NC16 - XDP_GPIO_S0_NC16 */ + GPIO_DEFAULT, /* S0_NC17 - XDP_GPIO_S0_NC17 */ + GPIO_DEFAULT, /* S0_NC18 - XDP_GPIO_S0_NC18 */ + GPIO_DEFAULT, /* S0_NC19 - XDP_GPIO_S0_NC19 */ + GPIO_DEFAULT, /* S0_NC20 - XDP_GPIO_S0_NC20 */ + GPIO_DEFAULT, /* S0_NC21 - XDP_GPIO_S0_NC21 */ + GPIO_DEFAULT, /* S0_NC22 - XDP_GPIO_S0_NC22 */ + GPIO_DEFAULT, /* S0_NC23 - XDP_GPIO_S0_NC23 */ + GPIO_NC, /* S0_NC24 - NC */ + GPIO_NC, /* S0_NC25 - NC */ + GPIO_NC, /* S0_NC26 - NC */ + GPIO_END +}; + +/* SCORE GPIOs */ +static const struct soc_gpio_map gpscore_gpio_map[] = { + GPIO_ACPI_SCI, /* S0_SC000 - SOC_KBC_SCI - INT */ + GPIO_FUNC2, /* S0_SC001 - SATA_DEVSLP_C */ + GPIO_NC, /* S0-SC002 - SATA_LED_R_N (NC/PU) */ + GPIO_FUNC1, /* S0-SC003 - PCIE_CLKREQ_IMAGE# */ + GPIO_FUNC1, /* S0-SC004 - PCIE_CLKREQ_WLAN# */ + GPIO_NC, /* S0-SC005 - PCIE_CLKREQ_LAN# (NC) */ + GPIO_NC, /* S0-SC006 - PCIE_CLKREQ3# (NC) */ + GPIO_FUNC(2, PULL_DISABLE, 10K), /* S0-SC007 - SD3_WP external pull */ + GPIO_NC, /* S0-SC008 - ACZ_RST# (NC) */ + GPIO_NC, /* S0-SC009 - ACZ_SYNC (NC) */ + GPIO_NC, /* S0-SC010 - ACZ_BCLK (NC) */ + GPIO_NC, /* S0-SC011 - ACZ_STDOUT (NC) */ + GPIO_NC, /* S0-SC012 - PCH_AZ_CODEC_SDIN0 (NC) */ + GPIO_NC, /* S0-SC013 - NC */ + GPIO_INPUT, /* S0-SC014 - DET_TRIGGER - INT */ + GPIO_INPUT, /* S0-SC015 - AJACK_MICPRES_L - INT */ + GPIO_FUNC(3, PULL_DOWN, 20K), /* S0-SC016 - MMC1_45_CLK */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC017 - MMC1_45_D[0] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC018 - MMC1_45_D[1] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC019 - MMC1_45_D[2] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC020 - MMC1_45_D[3] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC021 - MMC1_45_D[4] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC022 - MMC1_45_D[5] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC023 - MMC1_45_D[6] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC024 - MMC1_45_D[7] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC025 - MMC1_45_CMD */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC026 - MMC1_45_RST */ + GPIO_NC, /* S0-SC027 - NC */ + GPIO_NC, /* S0-SC028 - NC */ + GPIO_NC, /* S0-SC029 - NC */ + GPIO_NC, /* S0-SC030 - NC */ + GPIO_NC, /* S0-SC031 - NC */ + GPIO_NC, /* S0-SC032 - NC */ + GPIO_FUNC(1, PULL_DOWN, 20K), /* S0-SC033 - SD3_CLK */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC034 - SD3_D0 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC035 - SD3_D1 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC036 - SD3_D2 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC037 - SD3_D3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC038 - SD3_CD# */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC039 - SD3_CMD */ + GPIO_NC, /* S0-SC040 - SDMMC3_1P8_EN - TP3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC041 - SDIO3_PWR_EN# */ + GPIO_FUNC1, /* S0-SC042 - LPC_LAD0 */ + GPIO_FUNC1, /* S0-SC043 - LPC-LAD1 */ + GPIO_FUNC1, /* S0-SC044 - LPC_LAD2 */ + GPIO_FUNC1, /* S0-SC045 - LPC_LAD3 */ + GPIO_FUNC1, /* S0-SC046 - LPC_LFRAME# */ + GPIO_FUNC1, /* S0-SC047 - PCLK_TPM */ + GPIO_FUNC1, /* S0-SC048 - CLK_PCI_EC */ + GPIO_FUNC1, /* S0-SC049 - LPC_CLKRUN_L */ + GPIO_NC, /* S0-SC050 - IRQ_SERIRQ */ + GPIO_NC, /* S0-SC051 - SMB_SOC_DATA (XDP) */ + GPIO_NC, /* S0-SC052 - SMB_SOC_CLK (XDP) */ + GPIO_NC, /* S0-SC053 - SMB_SOC_ALERTB (NC) */ + GPIO_DEFAULT, /* S0-SC054 - NC */ + GPIO_DIRQ, /* S0-SC055 - TRACKPAD_INT_DX */ + GPIO_INPUT, /* S0-SC056 - GPIO_S0_SC_56 - STRAP */ + GPIO_FUNC1, /* S0-SC057 - PCH_UART_TXD */ + GPIO_INPUT, /* S0-SC058 - SIM_DET_C */ + GPIO_INPUT_LEGACY, /* S0-SC059 - EC_IN_RW_C */ + GPIO_NC, /* S0-SC060 - NC */ + GPIO_FUNC1, /* S0-SC061 - SOC_UART_RX */ + GPIO_FUNC1, /* S0-SC062 - I2S_BCLK */ + GPIO_FUNC1, /* S0-SC063 - I2S_LRCLK */ + GPIO_FUNC1, /* S0-SC064 - I2S_DIN */ + GPIO_FUNC1, /* S0-SC065 - I2S_DOUT */ + GPIO_FUNC1, /* S0-SC066 - SIO_SPI_CS# */ + GPIO_FUNC1, /* S0-SC067 - SIO_SPI_MISO */ + GPIO_FUNC1, /* S0-SC068 - SIO_SPI_MOSI */ + GPIO_FUNC1, /* S0-SC069 - SIO_SPI_CLK */ + GPIO_DIRQ, /* S0-SC070 - ALS_INT_L - INT */ + GPIO_NC, /* S0-SC071 - NC */ + GPIO_DIRQ, /* S0-SC072 - TOUCH_INT_L_DX */ + GPIO_NC, /* S0-SC073 - NC */ + GPIO_NC, /* S0-SC074 - SIO_UART2_RXD (NC) */ + GPIO_NC, /* S0-SC075 - SIO_UART2_TXD (NC) */ + GPIO_INPUT, /* S0-SC076 - BIOS_STRAP - STRAP */ + GPIO_INPUT, /* S0-SC077 - SOC_OVERRIDE - STRAP */ + GPIO_FUNC1, /* S0-SC078 - I2C_0_SDA */ + GPIO_FUNC1, /* S0-SC079 - I2C_0_SCL */ + GPIO_FUNC1, /* S0-SC080 - I2C_1_SDA */ + GPIO_FUNC1, /* S0-SC081 - I2C_1_SCL */ + GPIO_NC, /* S0-SC082 - NC */ + GPIO_NC, /* S0-SC083 - NC */ + GPIO_NC, /* S0-SC084 - NC */ + GPIO_NC, /* S0-SC085 - NC */ + GPIO_FUNC1, /* S0-SC086 - I2C_4_SDA */ + GPIO_FUNC1, /* S0-SC087 - I2C_4_SCL */ + GPIO_FUNC1, /* S0-SC088 - I2C_5_SDA */ + GPIO_FUNC1, /* S0-SC089 - I2C_5_SCL */ + GPIO_NC, /* S0-SC090 - NC */ + GPIO_NC, /* S0-SC091 - NC */ + GPIO_NC, /* S0-SC092 - I2C_NGFF_SDA (NC/PU) */ + GPIO_NC, /* S0-SC093 - I2C_NGFF_SCL (NC/PU) */ + GPIO_NC, /* S0-SC094 - NC */ + GPIO_NC, /* S0-SC095 - SIO_PWM1 (NC) */ + GPIO_FUNC1, /* S0-SC096 - I2S_MCLK */ + GPIO_NC, /* S0-SC097 - NC */ + GPIO_NC, /* S0-SC098 - NC */ + GPIO_NC, /* S0-SC099 - NC */ + GPIO_NC, /* S0-SC100 - NC */ + GPIO_DIRQ, /* S0-SC101 - KBD_IRQ# */ + GPIO_END +}; + +/* SSUS GPIOs */ +static const struct soc_gpio_map gpssus_gpio_map[] = { + GPIO_ACPI_WAKE, /* S500 - PCH_WAKE# */ + GPIO_ACPI_WAKE, /* S501 - TRACKPAD_INT# - INT */ + GPIO_ACPI_WAKE, /* S502 - TOUCH_INT# - INT */ + GPIO_FUNC6, /* S503 - LTE_WAKE_L# - INT */ + GPIO_NC, /* S504 - SOC_JTAG2_TDO (NC/PU) */ + GPIO_FUNC1, /* S505 - SUS_CLK_WLAN (NC) */ + GPIO_INPUT_PU, /* S506 - PCH_SPI_WP */ + GPIO_ACPI_SMI, /* S507 - SOC_KBC_SMI - INT */ + GPIO_NC, /* S508 - NC */ + GPIO_DIRQ, /* S509 - MUX_AUD_INT1# */ + GPIO_OUT_HIGH, /* S510 - WIFI_DISABLE_L */ + GPIO_FUNC0, /* S511 - SUSPWRDNACK */ + GPIO_FUNC0, /* S512 - WIFI_SUSCLK */ + GPIO_FUNC0, /* S513 - SLP_SX */ + GPIO_NC, /* S514 - NC */ + GPIO_FUNC0, /* S515 - WLAN_WAKE_L - INT */ + GPIO_FUNC0, /* S516 - PCH_PWRBTN_L */ + GPIO_NC, /* S517 - NC */ + GPIO_FUNC0, /* S518 - SUS_STAT# */ + GPIO_FUNC0, /* S519 - USB_OC0# */ + GPIO_FUNC0, /* S520 - USB_OC1# */ + GPIO_NC, /* S521 - NC */ + GPIO_NC, /* S522 - XDP_GPIO_DFX0 */ + GPIO_NC, /* S523 - XDP_GPIO_DFX1 */ + GPIO_NC, /* S524 - XDP_GPIO_DFX2 */ + GPIO_NC, /* S525 - XDP_GPIO_DFX3 */ + GPIO_NC, /* S526 - XDP_GPIO_DFX4 */ + GPIO_NC, /* S527 - XDP_GPIO_DFX5 */ + GPIO_NC, /* S528 - XDP_GPIO_DFX6 */ + GPIO_NC, /* S529 - XDP_GPIO_DFX7 */ + GPIO_NC, /* S530 - XDP_GPIO_DFX8 */ + GPIO_NC, /* S531 - NC */ + GPIO_NC, /* S532 - NC */ + GPIO_NC, /* S533 - NC */ + GPIO_NC, /* S534 - NC */ + GPIO_OUT_HIGH, /* S535 - LTE_DISABLE_L */ + GPIO_NC, /* S536 - NC */ + GPIO_INPUT, /* S537 - RAM_ID0 */ + GPIO_INPUT, /* S538 - RAM_ID1 */ + GPIO_INPUT, /* S539 - RAM_ID2 */ + GPIO_NC, /* S540 - NC */ + GPIO_NC, /* S541 - NC */ + GPIO_NC, /* S542 - NC */ + GPIO_NC, /* S543 - NC */ + GPIO_END +}; + +static const u8 core_dedicated_irq[GPIO_MAX_DIRQS] = { + [TPAD_IRQ_OFFSET] = TPAD_IRQ_GPIO, + [TOUCH_IRQ_OFFSET] = TOUCH_IRQ_GPIO, + [I8042_IRQ_OFFSET] = I8042_IRQ_GPIO, + [ALS_IRQ_OFFSET] = ALS_IRQ_GPIO, +}; + +static const u8 sus_dedicated_irq[GPIO_MAX_DIRQS] = { + [CODEC_IRQ_OFFSET] = CODEC_IRQ_GPIO, +}; + +static struct soc_gpio_config gpio_config = { + .ncore = gpncore_gpio_map, + .score = gpscore_gpio_map, + .ssus = gpssus_gpio_map, + .core_dirq = &core_dedicated_irq, + .sus_dirq = &sus_dedicated_irq, +}; + +struct soc_gpio_config* mainboard_get_gpios(void) +{ + return &gpio_config; +} diff --git a/src/mainboard/google/rambi/variants/squawks/include/variant/acpi/dptf.asl b/src/mainboard/google/rambi/variants/squawks/include/variant/acpi/dptf.asl new file mode 100644 index 0000000..b17f980 --- /dev/null +++ b/src/mainboard/google/rambi/variants/squawks/include/variant/acpi/dptf.asl @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define DPTF_CPU_PASSIVE 90 +#define DPTF_CPU_CRITICAL 100 + +#define DPTF_TSR0_SENSOR_ID 1 +#define DPTF_TSR0_SENSOR_NAME "TMP432_Internal" +#define DPTF_TSR0_PASSIVE 53 +#define DPTF_TSR0_CRITICAL 80 + +#define DPTF_TSR1_SENSOR_ID 2 +#define DPTF_TSR1_SENSOR_NAME "TMP432_Power_top" +#define DPTF_TSR1_PASSIVE 80 +#define DPTF_TSR1_CRITICAL 90 + +#define DPTF_TSR2_SENSOR_ID 3 +#define DPTF_TSR2_SENSOR_NAME "TMP432_CPU_bottom" +#define DPTF_TSR2_PASSIVE 53 +#define DPTF_TSR2_CRITICAL 100 + +#define DPTF_ENABLE_CHARGER + +/* Charger performance states, board-specific values from charger and EC */ +Name (CHPS, Package () { + Package () { 0, 0, 0, 0, 255, 0x7d0, "mA", 0 }, /* 2.0A */ + Package () { 0, 0, 0, 0, 24, 0x6a4, "mA", 0 }, /* 1.7A */ + Package () { 0, 0, 0, 0, 16, 0x578, "mA", 0 }, /* 1.4A */ + Package () { 0, 0, 0, 0, 8, 0x3e8, "mA", 0 }, /* 1.0A */ + Package () { 0, 0, 0, 0, 0, 0x258, "mA", 0 }, /* 0.6A */ +}) diff --git a/src/mainboard/google/rambi/variants/squawks/include/variant/acpi/mainboard.asl b/src/mainboard/google/rambi/variants/squawks/include/variant/acpi/mainboard.asl new file mode 100644 index 0000000..3cdd5c0 --- /dev/null +++ b/src/mainboard/google/rambi/variants/squawks/include/variant/acpi/mainboard.asl @@ -0,0 +1,16 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Elan trackpad */ +#include <mainboard/google/rambi/acpi/trackpad_elan.asl> diff --git a/src/mainboard/google/rambi/variants/squawks/include/variant/onboard.h b/src/mainboard/google/rambi/variants/squawks/include/variant/onboard.h new file mode 100644 index 0000000..4bb37be --- /dev/null +++ b/src/mainboard/google/rambi/variants/squawks/include/variant/onboard.h @@ -0,0 +1,34 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ONBOARD_H +#define ONBOARD_H + +#include <mainboard/google/rambi/irqroute.h> + +/* PCH wake signal from EC. */ +#define BOARD_PCH_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(0) + +#define BOARD_TRACKPAD_NAME "trackpad" +#define BOARD_TRACKPAD_IRQ GPIO_S0_DED_IRQ(TPAD_IRQ_OFFSET) +#define BOARD_TRACKPAD_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(1) +#define BOARD_TRACKPAD_I2C_BUS 0 +#define BOARD_TRACKPAD_I2C_ADDR 0x15 + +#define BOARD_I8042_IRQ GPIO_S0_DED_IRQ(I8042_IRQ_OFFSET) +#define BOARD_CODEC_IRQ GPIO_S5_DED_IRQ(CODEC_IRQ_OFFSET) +#define BOARD_ALS_IRQ GPIO_S0_DED_IRQ(ALS_IRQ_OFFSET) + +#endif diff --git a/src/mainboard/google/rambi/variants/squawks/include/variant/variant.h b/src/mainboard/google/rambi/variants/squawks/include/variant/variant.h new file mode 100644 index 0000000..2b80bf4 --- /dev/null +++ b/src/mainboard/google/rambi/variants/squawks/include/variant/variant.h @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef VARIANT_H +#define VARIANT_H + +/* + * RAM_ID[2:0] are on GPIO_SSUS[39:37] + * 0b000 - 4GiB total - 2 x 2GiB Elpida EDJ4216EFBG-GNL-F 1600MHz + * 0b001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + * 0b010 - 4GiB total - 2 x 2GiB Hynix H5TC4G63CFR-PBR 1600MHz + * 0b011 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBR 1600MHz + * 0b100 - 2GiB total - 1 x 2GiB Elpida EDJ4216EFBG-GNL-F 1600MHz + * 0b101 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + * 0b110 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBR 1600MHz + * 0b111 - 2GiB total - 1 x 2GiB Hynix H5TC4G63CFR-PBR 1600MHz + */ + +static const uint32_t dual_channel_config = + (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3); + +#define SPD_SIZE 256 +#define GPIO_SSUS_37_PAD 57 +#define GPIO_SSUS_38_PAD 50 +#define GPIO_SSUS_39_PAD 58 + +#endif diff --git a/src/mainboard/google/rambi/variants/sumo/Makefile.inc b/src/mainboard/google/rambi/variants/sumo/Makefile.inc new file mode 100644 index 0000000..b2552d3 --- /dev/null +++ b/src/mainboard/google/rambi/variants/sumo/Makefile.inc @@ -0,0 +1,49 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +SPD_BIN = $(obj)/spd.bin + +# Order matters for SPD sources. The following indicies +# define the SPD data to use. +# 0b000 - 4GiB total - 2 x 2GiB Micron MT41K256M16HA-125:E 1600MHz +# 0b001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz +# 0b010 - 2GiB total - 2 x 1GiB Micron MT41K128M16JT-125:K 1600MHz +# 0b011 - 2GiB total - 2 x 1GiB Hynix H5TC2G63FFR-PBA 1600MHz +# 0b100 - 2GiB total - 1 x 2GiB Micron MT41K256M16HA-125:E 1600MHz +# 0b101 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz +# 0b110 - 4GiB total - 2 x 2GiB Hynix H5TC4G63CFR-PBA 1600MHz +# 0b111 - 2GiB total - 1 x 2GiB Hynix H5TC4G63CFR-PBA 1600MHz +SPD_SOURCES = micron_2GiB_dimm_MT41K256M16HA-125 +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += micron_1GiB_dimm_MT41K128M16JT-125 +SPD_SOURCES += hynix_1GiB_dimm_H5TC2G63FFR-PBA +SPD_SOURCES += micron_2GiB_dimm_MT41K256M16HA-125 +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63CFR-PBA +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63CFR-PBA + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex) + +# Include spd ROM data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/google/rambi/variants/sumo/devicetree.cb b/src/mainboard/google/rambi/variants/sumo/devicetree.cb new file mode 100644 index 0000000..89e2f2b --- /dev/null +++ b/src/mainboard/google/rambi/variants/sumo/devicetree.cb @@ -0,0 +1,102 @@ +chip soc/intel/baytrail + + # SATA port enable mask (2 ports) + register "sata_port_map" = "0x1" + register "sata_ahci" = "0x1" + register "ide_legacy_combined" = "0x0" + + # Route USB ports to XHCI + register "usb_route_to_xhci" = "1" + + # USB Port Disable Mask + register "usb2_port_disable_mask" = "0x0" + register "usb3_port_disable_mask" = "0x0" + + # USB PHY settings + # TODO: These values are from Baytrail and need tuned for Sumo board + register "usb2_per_port_lane0" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" + register "usb2_per_port_lane1" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" + register "usb2_per_port_lane2" = "0x00049209" + register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" + register "usb2_per_port_lane3" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" + register "usb2_comp_bg" = "0x4700" + + # LPE audio codec settings + register "lpe_codec_clk_freq" = "25" # 25MHz clock + register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] + + # SD Card controller + register "sdcard_cap_low" = "0x036864b2" + register "sdcard_cap_high" = "0x0" + + # Enable devices in ACPI mode + register "lpe_acpi_mode" = "1" + register "lpss_acpi_mode" = "1" + register "scc_acpi_mode" = "1" + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + # Enable PIPEA as DP_C + register "gpu_pipea_port_select" = "2" # DP_C + register "gpu_pipea_power_cycle_delay" = "6" # 600ms + register "gpu_pipea_power_on_delay" = "5000" # 500ms + register "gpu_pipea_light_on_delay" = "70" # 7ms + register "gpu_pipea_power_off_delay" = "500" # 50ms + register "gpu_pipea_light_off_delay" = "2000" # 200ms + + # VR PS2 control + register "vnn_ps2_enable" = "1" + register "vcc_ps2_enable" = "1" + + # Disable SLP_X stretching after SUS power well fail. + register "disable_slp_x_stretch_sus_fail" = "1" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # SoC router + device pci 02.0 on end # GFX + device pci 11.0 off end # SDIO + device pci 12.0 on end # SD + device pci 13.0 on end # SATA + device pci 14.0 on end # XHCI + device pci 15.0 on end # LPE + device pci 17.0 on end # MMC + device pci 18.0 on end # SIO_DMA1 + device pci 18.1 on end # I2C1 + device pci 18.2 on end # I2C2 + device pci 18.3 off end # I2C3 + device pci 18.4 off end # I2C4 + device pci 18.5 off end # I2C5 + device pci 18.6 on end # I2C6 + device pci 18.7 off end # I2C7 + device pci 1a.0 on end # TXE + device pci 1b.0 on end # HDA + device pci 1c.0 on end # PCIE_PORT1 + device pci 1c.1 off end # PCIE_PORT2 + device pci 1c.2 on end # PCIE_PORT3 + device pci 1c.3 on end # PCIE_PORT4 + device pci 1d.0 on end # EHCI + device pci 1e.0 on end # SIO_DMA2 + device pci 1e.1 off end # PWM1 + device pci 1e.2 off end # PWM2 + device pci 1e.3 off end # HSUART1 + device pci 1e.4 off end # HSUART2 + device pci 1e.5 off end # SPI + device pci 1f.0 on + chip ec/google/chromeec + # We only have one init function that + # we need to call to initialize the + # keyboard part of the EC. + device pnp ff.1 on # dummy address + end + end + end # LPC Bridge + device pci 1f.3 off end # SMBus + end +end diff --git a/src/mainboard/google/rambi/variants/sumo/gpio.c b/src/mainboard/google/rambi/variants/sumo/gpio.c new file mode 100644 index 0000000..0856c29 --- /dev/null +++ b/src/mainboard/google/rambi/variants/sumo/gpio.c @@ -0,0 +1,228 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdlib.h> +#include <soc/gpio.h> +#include <mainboard/google/rambi/irqroute.h> + +/* NCORE GPIOs */ +static const struct soc_gpio_map gpncore_gpio_map[] = { + GPIO_FUNC2, /* S0_NC00 - INT_HDMI_HPD - INT */ + GPIO_FUNC2, /* S0_NC01 - HDMI_DDCDATA_SW */ + GPIO_FUNC2, /* S0_NC02 - HDMI_DDCCLK_SW */ + GPIO_NC, /* S0_NC03 - NC */ + GPIO_NC, /* S0_NC04 - NC */ + GPIO_NC, /* S0_NC05 - NC */ + GPIO_FUNC2, /* S0_NC06 - EDP_HPD_L */ + GPIO_FUNC2, /* S0_NC07 - DDI1_DDCDATA */ + GPIO_FUNC2, /* S0_NC08 - DDI1_DDCCLK */ + GPIO_NC, /* S0_NC09 - NC */ + GPIO_FUNC2, /* S0_NC10 - SOC_EDP_BLON_C */ + GPIO_FUNC2, /* S0_NC11 - SOC_DPST_PWM_C */ + GPIO_NC, /* S0_NC12 - NC */ + GPIO_INPUT, /* S0_NC13 - GPIO_NC13 - STRAP */ + GPIO_NC, /* S0_NC14 - NC */ + GPIO_DEFAULT, /* S0_NC15 - XDP_GPIO_S0_NC15 */ + GPIO_DEFAULT, /* S0_NC16 - XDP_GPIO_S0_NC16 */ + GPIO_DEFAULT, /* S0_NC17 - XDP_GPIO_S0_NC17 */ + GPIO_DEFAULT, /* S0_NC18 - XDP_GPIO_S0_NC18 */ + GPIO_DEFAULT, /* S0_NC19 - XDP_GPIO_S0_NC19 */ + GPIO_DEFAULT, /* S0_NC20 - XDP_GPIO_S0_NC20 */ + GPIO_DEFAULT, /* S0_NC21 - XDP_GPIO_S0_NC21 */ + GPIO_DEFAULT, /* S0_NC22 - XDP_GPIO_S0_NC22 */ + GPIO_DEFAULT, /* S0_NC23 - XDP_GPIO_S0_NC23 */ + GPIO_NC, /* S0_NC24 - NC */ + GPIO_NC, /* S0_NC25 - NC */ + GPIO_NC, /* S0_NC26 - NC */ + GPIO_END +}; + +/* SCORE GPIOs */ +static const struct soc_gpio_map gpscore_gpio_map[] = { + GPIO_ACPI_SCI, /* S0_SC000 - SOC_KBC_SCI - INT */ + GPIO_NC, /* S0_SC001 - NC */ + GPIO_NC, /* S0-SC002 - SATA_LED_R_N (NC/PU) */ + GPIO_FUNC1, /* S0-SC003 - PCIE_CLKREQ_IMAGE0# */ + GPIO_NC, /* S0-SC004 - NC# */ + GPIO_FUNC1, /* S0-SC005 - PCIE_CLKREQ_WLAN# */ + GPIO_FUNC1, /* S0-SC006 - PCIE_CLKREQ_LAN# */ + GPIO_FUNC(2, PULL_DISABLE, 10K), /* S0-SC007 - SD3_WP external pull */ + GPIO_NC, /* S0-SC008 - ACZ_RST# (NC) */ + GPIO_NC, /* S0-SC009 - ACZ_SYNC (NC) */ + GPIO_NC, /* S0-SC010 - ACZ_BCLK (NC) */ + GPIO_NC, /* S0-SC011 - ACZ_STDOUT (NC) */ + GPIO_NC, /* S0-SC012 - PCH_AZ_CODEC_SDIN0 (NC) */ + GPIO_NC, /* S0-SC013 - NC */ + GPIO_INPUT, /* S0-SC014 - DET_TRIGGER - INT */ + GPIO_INPUT, /* S0-SC015 - AJACK_MICPRES_L - INT */ + GPIO_FUNC(3, PULL_DOWN, 20K), /* S0-SC016 - MMC1_45_CLK */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC017 - MMC1_45_D[0] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC018 - MMC1_45_D[1] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC019 - MMC1_45_D[2] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC020 - MMC1_45_D[3] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC021 - MMC1_45_D[4] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC022 - MMC1_45_D[5] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC023 - MMC1_45_D[6] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC024 - MMC1_45_D[7] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC025 - MMC1_45_CMD */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC026 - MMC1_45_RST */ + GPIO_NC, /* S0-SC027 - NC */ + GPIO_NC, /* S0-SC028 - NC */ + GPIO_NC, /* S0-SC029 - NC */ + GPIO_NC, /* S0-SC030 - NC */ + GPIO_NC, /* S0-SC031 - NC */ + GPIO_NC, /* S0-SC032 - NC */ + GPIO_FUNC(1, PULL_DOWN, 20K), /* S0-SC033 - SD3_CLK */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC034 - SD3_D0 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC035 - SD3_D1 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC036 - SD3_D2 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC037 - SD3_D3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC038 - SD3_CD# */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC039 - SD3_CMD */ + GPIO_NC, /* S0-SC040 - SDMMC3_1P8_EN - TP3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC041 - SDIO3_PWR_EN# */ + GPIO_FUNC1, /* S0-SC042 - LPC_LAD0 */ + GPIO_FUNC1, /* S0-SC043 - LPC-LAD1 */ + GPIO_FUNC1, /* S0-SC044 - LPC_LAD2 */ + GPIO_FUNC1, /* S0-SC045 - LPC_LAD3 */ + GPIO_FUNC1, /* S0-SC046 - LPC_LFRAME# */ + GPIO_FUNC1, /* S0-SC047 - PCLK_TPM */ + GPIO_FUNC1, /* S0-SC048 - CLK_PCI_EC */ + GPIO_FUNC1, /* S0-SC049 - LPC_CLKRUN_L */ + GPIO_NC, /* S0-SC050 - IRQ_SERIRQ */ + GPIO_FUNC1, /* S0-SC051 - SMB_SOC_DATA (XDP) */ + GPIO_FUNC1, /* S0-SC052 - SMB_SOC_CLK (XDP) */ + GPIO_NC, /* S0-SC053 - SMB_SOC_ALERTB (NC) */ + GPIO_DEFAULT, /* S0-SC054 - NC */ + GPIO_NC, /* S0-SC055 - NC */ + GPIO_INPUT, /* S0-SC056 - GPIO_S0_SC_56 - STRAP */ + GPIO_FUNC1, /* S0-SC057 - PCH_UART_TXD */ + GPIO_INPUT, /* S0-SC058 - SIM_DET_C */ + GPIO_INPUT_LEGACY, /* S0-SC059 - EC_IN_RW_C */ + GPIO_NC, /* S0-SC060 - NC */ + GPIO_FUNC1, /* S0-SC061 - SOC_UART_RX */ + GPIO_FUNC1, /* S0-SC062 - I2S_BCLK */ + GPIO_FUNC1, /* S0-SC063 - I2S_LRCLK */ + GPIO_FUNC1, /* S0-SC064 - I2S_DIN */ + GPIO_FUNC1, /* S0-SC065 - I2S_DOUT */ + GPIO_FUNC1, /* S0-SC066 - SIO_SPI_CS# */ + GPIO_FUNC1, /* S0-SC067 - SIO_SPI_MISO */ + GPIO_FUNC1, /* S0-SC068 - SIO_SPI_MOSI */ + GPIO_FUNC1, /* S0-SC069 - SIO_SPI_CLK */ + GPIO_NC, /* S0-SC070 - NC */ + GPIO_NC, /* S0-SC071 - NC */ + GPIO_DIRQ, /* S0-SC072 - TOUCH_INT_L_DX */ + GPIO_NC, /* S0-SC073 - NC */ + GPIO_NC, /* S0-SC074 - SIO_UART2_RXD (NC) */ + GPIO_NC, /* S0-SC075 - SIO_UART2_TXD (NC) */ + GPIO_NC, /* S0-SC076 - NC */ + GPIO_NC, /* S0-SC077 - NC */ + GPIO_NC, /* S0-SC078 - NC */ + GPIO_NC, /* S0-SC079 - NC */ + GPIO_FUNC1, /* S0-SC080 - I2C_1_SDA */ + GPIO_FUNC1, /* S0-SC081 - I2C_1_SCL */ + GPIO_NC, /* S0-SC082 - NC */ + GPIO_NC, /* S0-SC083 - NC */ + GPIO_NC, /* S0-SC084 - NC */ + GPIO_NC, /* S0-SC085 - NC */ + GPIO_NC, /* S0-SC086 - NC */ + GPIO_NC, /* S0-SC087 - NC */ + GPIO_FUNC1, /* S0-SC088 - I2C_5_SDA */ + GPIO_FUNC1, /* S0-SC089 - I2C_5_SCL */ + GPIO_NC, /* S0-SC090 - NC */ + GPIO_NC, /* S0-SC091 - NC */ + GPIO_NC, /* S0-SC092 - I2C_NGFF_SDA (NC/PU) */ + GPIO_NC, /* S0-SC093 - I2C_NGFF_SCL (NC/PU) */ + GPIO_NC, /* S0-SC094 - NC */ + GPIO_NC, /* S0-SC095 - SIO_PWM1 (NC) */ + GPIO_FUNC1, /* S0-SC096 - I2S_MCLK */ + GPIO_NC, /* S0-SC097 - NC */ + GPIO_NC, /* S0-SC098 - NC */ + GPIO_NC, /* S0-SC099 - NC */ + GPIO_NC, /* S0-SC100 - NC */ + GPIO_DIRQ, /* S0-SC101 - KBD_IRQ# */ + GPIO_END +}; + +/* SSUS GPIOs */ +static const struct soc_gpio_map gpssus_gpio_map[] = { + GPIO_ACPI_WAKE, /* S500 - PCH_WAKE# */ + GPIO_NC, /* S501 - NC */ + GPIO_ACPI_WAKE, /* S502 - TOUCH_INT# - INT */ + GPIO_FUNC6, /* S503 - LTE_WAKE_L# - INT */ + GPIO_NC, /* S504 - SOC_JTAG2_TDO (NC/PU) */ + GPIO_FUNC1, /* S505 - SUS_CLK_WLAN (NC) */ + GPIO_INPUT_PU, /* S506 - PCH_SPI_WP */ + GPIO_ACPI_SMI, /* S507 - SOC_KBC_SMI - INT */ + GPIO_INPUT, /* S508 - SOC_RECOVER- */ + GPIO_DIRQ, /* S509 - MUX_AUD_INT1# */ + GPIO_OUT_HIGH, /* S510 - WIFI_DISABLE_L */ + GPIO_FUNC0, /* S511 - SUSPWRDNACK */ + GPIO_FUNC0, /* S512 - WIFI_SUSCLK */ + GPIO_FUNC0, /* S513 - SLP_SX */ + GPIO_NC, /* S514 - NC */ + GPIO_FUNC0, /* S515 - WLAN_WAKE_L - INT */ + GPIO_FUNC0, /* S516 - PCH_PWRBTN_L */ + GPIO_NC, /* S517 - NC */ + GPIO_FUNC0, /* S518 - SUS_STAT# */ + GPIO_FUNC0, /* S519 - USB_OC0# */ + GPIO_FUNC0, /* S520 - USB_OC1# */ + GPIO_NC, /* S521 - NC */ + GPIO_NC, /* S522 - XDP_GPIO_DFX0 */ + GPIO_NC, /* S523 - XDP_GPIO_DFX1 */ + GPIO_NC, /* S524 - XDP_GPIO_DFX2 */ + GPIO_NC, /* S525 - XDP_GPIO_DFX3 */ + GPIO_NC, /* S526 - XDP_GPIO_DFX4 */ + GPIO_NC, /* S527 - XDP_GPIO_DFX5 */ + GPIO_NC, /* S528 - XDP_GPIO_DFX6 */ + GPIO_NC, /* S529 - XDP_GPIO_DFX7 */ + GPIO_NC, /* S530 - XDP_GPIO_DFX8 */ + GPIO_NC, /* S531 - NC */ + GPIO_NC, /* S532 - NC */ + GPIO_NC, /* S533 - NC */ + GPIO_NC, /* S534 - NC */ + GPIO_OUT_HIGH, /* S535 - LTE_DISABLE_L */ + GPIO_NC, /* S536 - NC */ + GPIO_INPUT, /* S537 - RAM_ID0 */ + GPIO_INPUT, /* S538 - RAM_ID1 */ + GPIO_INPUT, /* S539 - RAM_ID2 */ + GPIO_NC, /* S540 - NC */ + GPIO_NC, /* S541 - NC */ + GPIO_NC, /* S542 - NC */ + GPIO_NC, /* S543 - NC */ + GPIO_END +}; + +static const u8 core_dedicated_irq[GPIO_MAX_DIRQS] = { + [TOUCH_IRQ_OFFSET] = TOUCH_IRQ_GPIO, + [I8042_IRQ_OFFSET] = I8042_IRQ_GPIO, +}; + +static const u8 sus_dedicated_irq[GPIO_MAX_DIRQS] = { + [CODEC_IRQ_OFFSET] = CODEC_IRQ_GPIO, +}; + +static struct soc_gpio_config gpio_config = { + .ncore = gpncore_gpio_map, + .score = gpscore_gpio_map, + .ssus = gpssus_gpio_map, + .core_dirq = &core_dedicated_irq, + .sus_dirq = &sus_dedicated_irq, +}; + +struct soc_gpio_config* mainboard_get_gpios(void) +{ + return &gpio_config; +} diff --git a/src/mainboard/google/rambi/variants/sumo/include/variant/acpi/dptf.asl b/src/mainboard/google/rambi/variants/sumo/include/variant/acpi/dptf.asl new file mode 100644 index 0000000..3530d7b --- /dev/null +++ b/src/mainboard/google/rambi/variants/sumo/include/variant/acpi/dptf.asl @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define DPTF_CPU_PASSIVE 80 +#define DPTF_CPU_CRITICAL 90 + +#define DPTF_TSR0_SENSOR_ID 1 +#define DPTF_TSR0_SENSOR_NAME "TMP432_Internal" +#define DPTF_TSR0_PASSIVE 48 +#define DPTF_TSR0_CRITICAL 70 + +#define DPTF_TSR1_SENSOR_ID 2 +#define DPTF_TSR1_SENSOR_NAME "TMP432_Power_top" +#define DPTF_TSR1_PASSIVE 60 +#define DPTF_TSR1_CRITICAL 70 + +#define DPTF_TSR2_SENSOR_ID 3 +#define DPTF_TSR2_SENSOR_NAME "TMP432_CPU_bottom" +#define DPTF_TSR2_PASSIVE 55 +#define DPTF_TSR2_CRITICAL 70 + +#define DPTF_ENABLE_CHARGER + +/* Charger performance states, board-specific values from charger and EC */ +Name (CHPS, Package () { + Package () { 0, 0, 0, 0, 255, 0x6a4, "mA", 0 }, /* 1.7A (MAX) */ + Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 }, /* 1.5A */ + Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 }, /* 1.0A */ + Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 }, /* 0.5A */ + Package () { 0, 0, 0, 0, 0, 0x080, "mA", 0 }, /* 0.128A */ +}) diff --git a/src/mainboard/google/rambi/variants/sumo/include/variant/acpi/mainboard.asl b/src/mainboard/google/rambi/variants/sumo/include/variant/acpi/mainboard.asl new file mode 100644 index 0000000..e7f06ee --- /dev/null +++ b/src/mainboard/google/rambi/variants/sumo/include/variant/acpi/mainboard.asl @@ -0,0 +1,16 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* WDT touchscreen */ +#include <mainboard/google/rambi/acpi/touchscreen_wdt.asl> diff --git a/src/mainboard/google/rambi/variants/sumo/include/variant/onboard.h b/src/mainboard/google/rambi/variants/sumo/include/variant/onboard.h new file mode 100644 index 0000000..1fb268a --- /dev/null +++ b/src/mainboard/google/rambi/variants/sumo/include/variant/onboard.h @@ -0,0 +1,47 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ONBOARD_H +#define ONBOARD_H + +#include <mainboard/google/rambi/irqroute.h> + +#ifndef __ACPI__ +void lan_init(void); +#endif + +/* defines for programming the MAC address */ +#define SUMO_NIC_VENDOR_ID 0x10EC +#define SUMO_NIC_DEVICE_ID 0x8168 + +/* 0x00: White LINK LED and Amber ACTIVE LED */ +#define SUMO_NIC_LED_MODE 0x00 + +/* PCH wake signal from EC. */ +#define BOARD_PCH_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(0) + +#define BOARD_TOUCHSCREEN_NAME "touchscreen" +#define BOARD_TOUCHSCREEN_IRQ GPIO_S0_DED_IRQ(TOUCH_IRQ_OFFSET) +#define BOARD_TOUCHSCREEN_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(2) +#define BOARD_TOUCHSCREEN_I2C_BUS 5 +#define BOARD_TOUCHSCREEN_I2C_ADDR 0x2c + +#define BOARD_I8042_IRQ GPIO_S0_DED_IRQ(I8042_IRQ_OFFSET) +#define BOARD_CODEC_IRQ GPIO_S5_DED_IRQ(CODEC_IRQ_OFFSET) + +/* Disable PS2 keyboard */ +#undef SIO_EC_ENABLE_PS2K + +#endif diff --git a/src/mainboard/google/rambi/variants/sumo/include/variant/variant.h b/src/mainboard/google/rambi/variants/sumo/include/variant/variant.h new file mode 100644 index 0000000..8d2113c --- /dev/null +++ b/src/mainboard/google/rambi/variants/sumo/include/variant/variant.h @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef VARIANT_H +#define VARIANT_H + +/* + * RAM_ID[2:0] are on GPIO_SSUS[39:37] + * 0b000 - 4GiB total - 2 x 2GiB Micron MT41K256M16HA-125:E 1600MHz + * 0b001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + * 0b010 - 2GiB total - 2 x 1GiB Micron MT41K128M16JT-125:K 1600MHz + * 0b011 - 2GiB total - 2 x 1GiB Hynix H5TC2G63FFR-PBA 1600MHz + * 0b100 - 2GiB total - 1 x 2GiB Micron MT41K256M16HA-125:E 1600MHz + * 0b101 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + * 0b110 - 4GiB total - 2 x 2GiB Hynix H5TC4G63CFR-PBA 1600MHz + * 0b111 - 2GiB total - 1 x 2GiB Hynix H5TC4G63CFR-PBA 1600MHz + */ + +static const uint32_t dual_channel_config = + (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 6); + +#define SPD_SIZE 256 +#define GPIO_SSUS_37_PAD 57 +#define GPIO_SSUS_38_PAD 50 +#define GPIO_SSUS_39_PAD 58 + +#endif diff --git a/src/mainboard/google/rambi/variants/sumo/lan.c b/src/mainboard/google/rambi/variants/sumo/lan.c new file mode 100644 index 0000000..07fe3d9 --- /dev/null +++ b/src/mainboard/google/rambi/variants/sumo/lan.c @@ -0,0 +1,191 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <cbfs.h> +#include <string.h> +#include <types.h> +#include <arch/io.h> +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <fmap.h> +#include <variant/onboard.h> + +static unsigned int search(char *p, u8 *a, unsigned int lengthp, + unsigned int lengtha) +{ + int i, j; + + /* Searching */ + for (j = 0; j <= lengtha - lengthp; j++) { + for (i = 0; i < lengthp && p[i] == a[i + j]; i++) + ; + if (i >= lengthp) + return j; + } + return lengtha; +} + +static unsigned char get_hex_digit(u8 *offset) +{ + unsigned char retval = 0; + + retval = *offset - '0'; + if (retval > 0x09) { + retval = *offset - 'A' + 0x0A; + if (retval > 0x0F) + retval = *offset - 'a' + 0x0a; + } + if (retval > 0x0F) { + printk(BIOS_DEBUG, "Error: Invalid Hex digit found: %c - 0x%02x\n", + *offset, *offset); + retval = 0; + } + + return retval; +} + +static int get_mac_address(u32 *high_dword, u32 *low_dword, + u8 *search_address, u32 search_length) +{ + char key[] = "ethernet_mac"; + unsigned int offset; + int i; + + offset = search(key, search_address, sizeof(key) - 1, search_length); + if (offset == search_length) { + printk(BIOS_DEBUG, + "Error: Could not locate '%s' in VPD\n", key); + return 0; + } + printk(BIOS_DEBUG, "Located '%s' in VPD\n", key); + + offset += sizeof(key); /* move to next character */ + *high_dword = 0; + + /* Fetch the MAC address and put the octets in the correct order to + * be programmed. + * + * From RTL8105E_Series_EEPROM-Less_App_Note_1.1 + * If the MAC address is 001122334455h: + * Write 33221100h to I/O register offset 0x00 via double word access + * Write 00005544h to I/O register offset 0x04 via double word access + */ + + for (i = 0; i < 4; i++) { + *high_dword |= (get_hex_digit(search_address + offset) + << (4 + (i * 8))); + *high_dword |= (get_hex_digit(search_address + offset + 1) + << (i * 8)); + offset += 3; + } + + *low_dword = 0; + for (i = 0; i < 2; i++) { + *low_dword |= (get_hex_digit(search_address + offset) + << (4 + (i * 8))); + *low_dword |= (get_hex_digit(search_address + offset + 1) + << (i * 8)); + offset += 3; + } + + return *high_dword | *low_dword; +} + +static void program_mac_address(u16 io_base) +{ + void *search_address = NULL; + size_t search_length = -1; + + /* Default MAC Address of A0:00:BA:D0:0B:AD */ + u32 high_dword = 0xD0BA00A0; /* high dword of mac address */ + u32 low_dword = 0x0000AD0B; /* low word of mac address as a dword */ + + if (IS_ENABLED(CONFIG_CHROMEOS)) { + struct region_device rdev; + + if (fmap_locate_area_as_rdev("RO_VPD", &rdev) == 0) { + search_address = rdev_mmap_full(&rdev); + + if (search_address != NULL) + search_length = region_device_sz(&rdev); + } + } else { + search_address = cbfs_boot_map_with_leak("vpd.bin", + CBFS_TYPE_RAW, + &search_length); + } + + if (search_address == NULL) + printk(BIOS_ERR, "LAN: VPD not found.\n"); + else + get_mac_address(&high_dword, &low_dword, search_address, + search_length); + + if (io_base) { + printk(BIOS_DEBUG, "Realtek NIC io_base = 0x%04x\n", io_base); + printk(BIOS_DEBUG, "Programming MAC Address\n"); + + /* Disable register protection */ + outb(0xc0, io_base + 0x50); + outl(high_dword, io_base); + outl(low_dword, io_base + 0x04); + outb(0x60, io_base + 54); + /* Enable register protection again */ + outb(0x00, io_base + 0x50); + } +} + +void lan_init(void) +{ + u16 io_base = 0; + struct device *ethernet_dev = NULL; + + /* Get NIC's IO base address */ + ethernet_dev = dev_find_device(SUMO_NIC_VENDOR_ID, + SUMO_NIC_DEVICE_ID, 0); + if (ethernet_dev != NULL) { + io_base = pci_read_config16(ethernet_dev, 0x10) & 0xfffe; + + /* + * Battery life time - LAN PCIe should enter ASPM L1 to save + * power when LAN connection is idle. + * enable CLKREQ: LAN pci config space 0x81h=01 + */ + pci_write_config8(ethernet_dev, 0x81, 0x01); + } + + if (io_base) { + /* Program MAC address based on VPD data */ + program_mac_address(io_base); + + /* + * Program NIC LEDS + * + * RTL8105E Series EEPROM-Less Application Note, + * Section 5.6 LED Mode Configuration + * + * Step1: Write C0h to I/O register 0x50 via byte access to + * disable 'register protection' + * Step2: Write xx001111b to I/O register 0x52 via byte access + * (bit7 is LEDS1 and bit6 is LEDS0) + * Step3: Write 0x00 to I/O register 0x50 via byte access to + * enable 'register protection' + */ + outb(0xc0, io_base + 0x50); /* Disable protection */ + outb((SUMO_NIC_LED_MODE << 6) | 0x0f, io_base + 0x52); + outb(0x00, io_base + 0x50); /* Enable register protection */ + } +} diff --git a/src/mainboard/google/rambi/variants/swanky/Makefile.inc b/src/mainboard/google/rambi/variants/swanky/Makefile.inc new file mode 100644 index 0000000..1458ebb --- /dev/null +++ b/src/mainboard/google/rambi/variants/swanky/Makefile.inc @@ -0,0 +1,41 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +SPD_BIN = $(obj)/spd.bin + +# Order matters for SPD sources. The following indicies +# define the SPD data to use. +# 0b000 - 2GiB total - 1 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz +# 0b001 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz +# 0b010 - 4GiB total - 2 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz +# 0b011 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz +SPD_SOURCES = samsung_2GiB_dimm_K4B4G1646Q-HYK0 +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA +SPD_SOURCES += samsung_2GiB_dimm_K4B4G1646Q-HYK0 +SPD_SOURCES += hynix_2GiB_dimm_H5TC4G63AFR-PBA + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex) + +# Include spd ROM data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/google/rambi/variants/swanky/devicetree.cb b/src/mainboard/google/rambi/variants/swanky/devicetree.cb new file mode 100644 index 0000000..5e78a10 --- /dev/null +++ b/src/mainboard/google/rambi/variants/swanky/devicetree.cb @@ -0,0 +1,101 @@ +chip soc/intel/baytrail + + # SATA port enable mask (2 ports) + register "sata_port_map" = "0x1" + register "sata_ahci" = "0x1" + register "ide_legacy_combined" = "0x0" + + # Route USB ports to XHCI + register "usb_route_to_xhci" = "1" + + # USB Port Disable Mask + register "usb2_port_disable_mask" = "0x0" + register "usb3_port_disable_mask" = "0x0" + + # USB PHY settings + # TODO: These values are from Baytrail and need tuned for Swanky board + register "usb2_per_port_lane0" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" + register "usb2_per_port_lane1" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" + register "usb2_per_port_lane2" = "0x00049209" + register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" + register "usb2_per_port_lane3" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" + + # LPE audio codec settings + register "lpe_codec_clk_freq" = "25" # 25MHz clock + register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] + + # SD Card controller + register "sdcard_cap_low" = "0x036864b2" + register "sdcard_cap_high" = "0x0" + + # Enable devices in ACPI mode + register "lpe_acpi_mode" = "1" + register "lpss_acpi_mode" = "1" + register "scc_acpi_mode" = "1" + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + # Enable PIPEA as DP_C + register "gpu_pipea_port_select" = "2" # DP_C + register "gpu_pipea_power_cycle_delay" = "6" # 600ms + register "gpu_pipea_power_on_delay" = "5000" # 500ms + register "gpu_pipea_light_on_delay" = "70" # 7ms + register "gpu_pipea_power_off_delay" = "500" # 50ms + register "gpu_pipea_light_off_delay" = "2000" # 200ms + + # VR PS2 control + register "vnn_ps2_enable" = "1" + register "vcc_ps2_enable" = "1" + + # Disable SLP_X stretching after SUS power well fail. + register "disable_slp_x_stretch_sus_fail" = "1" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # SoC router + device pci 02.0 on end # GFX + device pci 11.0 off end # SDIO + device pci 12.0 on end # SD + device pci 13.0 on end # SATA + device pci 14.0 on end # XHCI + device pci 15.0 on end # LPE + device pci 17.0 on end # MMC + device pci 18.0 on end # SIO_DMA1 + device pci 18.1 on end # I2C1 + device pci 18.2 on end # I2C2 + device pci 18.3 off end # I2C3 + device pci 18.4 off end # I2C4 + device pci 18.5 on end # I2C5 + device pci 18.6 on end # I2C6 + device pci 18.7 off end # I2C7 + device pci 1a.0 on end # TXE + device pci 1b.0 on end # HDA + device pci 1c.0 on end # PCIE_PORT1 + device pci 1c.1 on end # PCIE_PORT2 + device pci 1c.2 off end # PCIE_PORT3 + device pci 1c.3 off end # PCIE_PORT4 + device pci 1d.0 on end # EHCI + device pci 1e.0 on end # SIO_DMA2 + device pci 1e.1 off end # PWM1 + device pci 1e.2 off end # PWM2 + device pci 1e.3 off end # HSUART1 + device pci 1e.4 off end # HSUART2 + device pci 1e.5 off end # SPI + device pci 1f.0 on + chip ec/google/chromeec + # We only have one init function that + # we need to call to initialize the + # keyboard part of the EC. + device pnp ff.1 on # dummy address + end + end + end # LPC Bridge + device pci 1f.3 off end # SMBus + end +end diff --git a/src/mainboard/google/rambi/variants/swanky/gpio.c b/src/mainboard/google/rambi/variants/swanky/gpio.c new file mode 100644 index 0000000..a713549 --- /dev/null +++ b/src/mainboard/google/rambi/variants/swanky/gpio.c @@ -0,0 +1,229 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdlib.h> +#include <soc/gpio.h> +#include <mainboard/google/rambi/irqroute.h> + +/* NCORE GPIOs */ +static const struct soc_gpio_map gpncore_gpio_map[] = { + GPIO_FUNC2, /* S0_NC00 - INT_HDMI_HPD - INT */ + GPIO_FUNC2, /* S0_NC01 - HDMI_DDCDATA_SW */ + GPIO_FUNC2, /* S0_NC02 - HDMI_DDCCLK_SW */ + GPIO_NC, /* S0_NC03 - NC */ + GPIO_NC, /* S0_NC04 - NC */ + GPIO_NC, /* S0_NC05 - NC */ + GPIO_FUNC2, /* S0_NC06 - EDP_HPD_L */ + GPIO_INPUT, /* S0_NC07 - DDI1_DDCDATA - STRAP */ + GPIO_NC, /* S0_NC08 - NC */ + GPIO_OUT_HIGH, /* S0_NC09 - SOC_DISP_ON_C */ + GPIO_FUNC2, /* S0_NC10 - SOC_EDP_BLON_C */ + GPIO_FUNC2, /* S0_NC11 - SOC_DPST_PWM_C */ + GPIO_NC, /* S0_NC12 - NC */ + GPIO_INPUT, /* S0_NC13 - GPIO_NC13 - STRAP */ + GPIO_NC, /* S0_NC14 - NC */ + GPIO_DEFAULT, /* S0_NC15 - XDP_GPIO_S0_NC15 */ + GPIO_DEFAULT, /* S0_NC16 - XDP_GPIO_S0_NC16 */ + GPIO_DEFAULT, /* S0_NC17 - XDP_GPIO_S0_NC17 */ + GPIO_DEFAULT, /* S0_NC18 - XDP_GPIO_S0_NC18 */ + GPIO_DEFAULT, /* S0_NC19 - XDP_GPIO_S0_NC19 */ + GPIO_DEFAULT, /* S0_NC20 - XDP_GPIO_S0_NC20 */ + GPIO_DEFAULT, /* S0_NC21 - XDP_GPIO_S0_NC21 */ + GPIO_DEFAULT, /* S0_NC22 - XDP_GPIO_S0_NC22 */ + GPIO_DEFAULT, /* S0_NC23 - XDP_GPIO_S0_NC23 */ + GPIO_NC, /* S0_NC24 - NC */ + GPIO_NC, /* S0_NC25 - NC */ + GPIO_NC, /* S0_NC26 - NC */ + GPIO_END +}; + +/* SCORE GPIOs */ +static const struct soc_gpio_map gpscore_gpio_map[] = { + GPIO_ACPI_SCI, /* S0_SC000 - SOC_KBC_SCI - INT */ + GPIO_FUNC2, /* S0_SC001 - SATA_DEVSLP_C */ + GPIO_NC, /* S0-SC002 - SATA_LED_R_N (NC/PU) */ + GPIO_FUNC1, /* S0-SC003 - PCIE_CLKREQ_IMAGE# */ + GPIO_FUNC1, /* S0-SC004 - PCIE_CLKREQ_WLAN# */ + GPIO_NC, /* S0-SC005 - PCIE_CLKREQ_LAN# (NC) */ + GPIO_NC, /* S0-SC006 - PCIE_CLKREQ3# (NC) */ + GPIO_FUNC(2, PULL_DISABLE, 10K), /* S0-SC007 - SD3_WP external pull */ + GPIO_NC, /* S0-SC008 - ACZ_RST# (NC) */ + GPIO_NC, /* S0-SC009 - ACZ_SYNC (NC) */ + GPIO_NC, /* S0-SC010 - ACZ_BCLK (NC) */ + GPIO_NC, /* S0-SC011 - ACZ_STDOUT (NC) */ + GPIO_NC, /* S0-SC012 - PCH_AZ_CODEC_SDIN0 (NC) */ + GPIO_NC, /* S0-SC013 - NC */ + GPIO_INPUT, /* S0-SC014 - DET_TRIGGER - INT */ + GPIO_INPUT, /* S0-SC015 - AJACK_MICPRES_L - INT */ + GPIO_FUNC(3, PULL_DOWN, 20K), /* S0-SC016 - MMC1_45_CLK */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC017 - MMC1_45_D[0] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC018 - MMC1_45_D[1] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC019 - MMC1_45_D[2] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC020 - MMC1_45_D[3] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC021 - MMC1_45_D[4] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC022 - MMC1_45_D[5] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC023 - MMC1_45_D[6] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC024 - MMC1_45_D[7] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC025 - MMC1_45_CMD */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC026 - MMC1_45_RST */ + GPIO_NC, /* S0-SC027 - NC */ + GPIO_NC, /* S0-SC028 - NC */ + GPIO_NC, /* S0-SC029 - NC */ + GPIO_NC, /* S0-SC030 - NC */ + GPIO_NC, /* S0-SC031 - NC */ + GPIO_NC, /* S0-SC032 - NC */ + GPIO_FUNC(1, PULL_DOWN, 20K), /* S0-SC033 - SD3_CLK */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC034 - SD3_D0 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC035 - SD3_D1 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC036 - SD3_D2 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC037 - SD3_D3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC038 - SD3_CD# */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC039 - SD3_CMD */ + GPIO_NC, /* S0-SC040 - SDMMC3_1P8_EN - TP3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC041 - SDIO3_PWR_EN# */ + GPIO_FUNC1, /* S0-SC042 - LPC_LAD0 */ + GPIO_FUNC1, /* S0-SC043 - LPC-LAD1 */ + GPIO_FUNC1, /* S0-SC044 - LPC_LAD2 */ + GPIO_FUNC1, /* S0-SC045 - LPC_LAD3 */ + GPIO_FUNC1, /* S0-SC046 - LPC_LFRAME# */ + GPIO_FUNC1, /* S0-SC047 - PCLK_TPM */ + GPIO_FUNC1, /* S0-SC048 - CLK_PCI_EC */ + GPIO_FUNC1, /* S0-SC049 - LPC_CLKRUN_L */ + GPIO_NC, /* S0-SC050 - IRQ_SERIRQ */ + GPIO_NC, /* S0-SC051 - SMB_SOC_DATA (XDP) */ + GPIO_NC, /* S0-SC052 - SMB_SOC_CLK (XDP) */ + GPIO_NC, /* S0-SC053 - SMB_SOC_ALERTB (NC) */ + GPIO_DEFAULT, /* S0-SC054 - NC */ + GPIO_DIRQ, /* S0-SC055 - TRACKPAD_INT_DX */ + GPIO_INPUT, /* S0-SC056 - GPIO_S0_SC_56 - STRAP */ + GPIO_FUNC1, /* S0-SC057 - PCH_UART_TXD */ + GPIO_INPUT, /* S0-SC058 - SIM_DET_C */ + GPIO_INPUT_LEGACY, /* S0-SC059 - EC_IN_RW_C */ + GPIO_NC, /* S0-SC060 - NC */ + GPIO_FUNC1, /* S0-SC061 - SOC_UART_RX */ + GPIO_FUNC1, /* S0-SC062 - I2S_BCLK */ + GPIO_FUNC1, /* S0-SC063 - I2S_LRCLK */ + GPIO_FUNC1, /* S0-SC064 - I2S_DIN */ + GPIO_FUNC1, /* S0-SC065 - I2S_DOUT */ + GPIO_FUNC1, /* S0-SC066 - SIO_SPI_CS# */ + GPIO_FUNC1, /* S0-SC067 - SIO_SPI_MISO */ + GPIO_FUNC1, /* S0-SC068 - SIO_SPI_MOSI */ + GPIO_FUNC1, /* S0-SC069 - SIO_SPI_CLK */ + GPIO_NC, /* S0-SC070 - ALS_INT_L - INT(NC) */ + GPIO_NC, /* S0-SC071 - NC */ + GPIO_DIRQ, /* S0-SC072 - TOUCH_INT_L_DX */ + GPIO_NC, /* S0-SC073 - NC */ + GPIO_NC, /* S0-SC074 - SIO_UART2_RXD (NC) */ + GPIO_NC, /* S0-SC075 - SIO_UART2_TXD (NC) */ + GPIO_INPUT, /* S0-SC076 - BIOS_STRAP - STRAP */ + GPIO_INPUT, /* S0-SC077 - SOC_OVERRIDE - STRAP */ + GPIO_FUNC1, /* S0-SC078 - I2C_0_SDA */ + GPIO_FUNC1, /* S0-SC079 - I2C_0_SCL */ + GPIO_FUNC1, /* S0-SC080 - I2C_1_SDA */ + GPIO_FUNC1, /* S0-SC081 - I2C_1_SCL */ + GPIO_NC, /* S0-SC082 - NC */ + GPIO_NC, /* S0-SC083 - NC */ + GPIO_NC, /* S0-SC084 - NC */ + GPIO_NC, /* S0-SC085 - NC */ + GPIO_FUNC1, /* S0-SC086 - I2C_4_SDA */ + GPIO_FUNC1, /* S0-SC087 - I2C_4_SCL */ + GPIO_FUNC1, /* S0-SC088 - I2C_5_SDA */ + GPIO_FUNC1, /* S0-SC089 - I2C_5_SCL */ + GPIO_NC, /* S0-SC090 - NC */ + GPIO_NC, /* S0-SC091 - NC */ + GPIO_NC, /* S0-SC092 - I2C_NGFF_SDA (NC/PU) */ + GPIO_NC, /* S0-SC093 - I2C_NGFF_SCL (NC/PU) */ + GPIO_NC, /* S0-SC094 - NC */ + GPIO_NC, /* S0-SC095 - SIO_PWM1 (NC) */ + GPIO_FUNC1, /* S0-SC096 - I2S_MCLK */ + GPIO_NC, /* S0-SC097 - NC */ + GPIO_NC, /* S0-SC098 - NC */ + GPIO_NC, /* S0-SC099 - NC */ + GPIO_NC, /* S0-SC100 - NC */ + GPIO_DIRQ, /* S0-SC101 - KBD_IRQ# */ + GPIO_END +}; + +/* SSUS GPIOs */ +static const struct soc_gpio_map gpssus_gpio_map[] = { + GPIO_ACPI_WAKE, /* S500 - PCH_WAKE# */ + GPIO_ACPI_WAKE, /* S501 - TRACKPAD_INT# - INT */ + GPIO_ACPI_WAKE, /* S502 - TOUCH_INT# - INT */ + GPIO_FUNC6, /* S503 - LTE_WAKE_L# - INT */ + GPIO_NC, /* S504 - SOC_JTAG2_TDO (NC/PU) */ + GPIO_FUNC1, /* S505 - SUS_CLK_WLAN (NC) */ + GPIO_INPUT_PU, /* S506 - PCH_SPI_WP */ + GPIO_ACPI_SMI, /* S507 - SOC_KBC_SMI - INT */ + GPIO_NC, /* S508 - NC */ + GPIO_DIRQ, /* S509 - MUX_AUD_INT1# */ + GPIO_OUT_HIGH, /* S510 - WIFI_DISABLE_L */ + GPIO_FUNC0, /* S511 - SUSPWRDNACK */ + GPIO_FUNC0, /* S512 - WIFI_SUSCLK */ + GPIO_FUNC0, /* S513 - SLP_SX */ + GPIO_NC, /* S514 - NC */ + GPIO_FUNC0, /* S515 - WLAN_WAKE_L - INT */ + GPIO_FUNC0, /* S516 - PCH_PWRBTN_L */ + GPIO_NC, /* S517 - NC */ + GPIO_FUNC0, /* S518 - SUS_STAT# */ + GPIO_FUNC0, /* S519 - USB_OC0# */ + GPIO_FUNC0, /* S520 - USB_OC1# */ + GPIO_NC, /* S521 - NC */ + GPIO_NC, /* S522 - XDP_GPIO_DFX0 */ + GPIO_NC, /* S523 - XDP_GPIO_DFX1 */ + GPIO_NC, /* S524 - XDP_GPIO_DFX2 */ + GPIO_NC, /* S525 - XDP_GPIO_DFX3 */ + GPIO_NC, /* S526 - XDP_GPIO_DFX4 */ + GPIO_NC, /* S527 - XDP_GPIO_DFX5 */ + GPIO_NC, /* S528 - XDP_GPIO_DFX6 */ + GPIO_NC, /* S529 - XDP_GPIO_DFX7 */ + GPIO_NC, /* S530 - XDP_GPIO_DFX8 */ + GPIO_NC, /* S531 - NC */ + GPIO_NC, /* S532 - NC */ + GPIO_NC, /* S533 - NC */ + GPIO_NC, /* S534 - NC */ + GPIO_OUT_HIGH, /* S535 - LTE_DISABLE_L */ + GPIO_NC, /* S536 - NC */ + GPIO_INPUT, /* S537 - RAM_ID0 */ + GPIO_INPUT, /* S538 - RAM_ID1 */ + GPIO_INPUT, /* S539 - RAM_ID2 */ + GPIO_NC, /* S540 - NC */ + GPIO_INPUT, /* S541 - PANEL_ID */ + GPIO_NC, /* S542 - NC */ + GPIO_NC, /* S543 - NC */ + GPIO_END +}; + +static const u8 core_dedicated_irq[GPIO_MAX_DIRQS] = { + [TPAD_IRQ_OFFSET] = TPAD_IRQ_GPIO, + [TOUCH_IRQ_OFFSET] = TOUCH_IRQ_GPIO, + [I8042_IRQ_OFFSET] = I8042_IRQ_GPIO, +}; + +static const u8 sus_dedicated_irq[GPIO_MAX_DIRQS] = { + [CODEC_IRQ_OFFSET] = CODEC_IRQ_GPIO, +}; + +static struct soc_gpio_config gpio_config = { + .ncore = gpncore_gpio_map, + .score = gpscore_gpio_map, + .ssus = gpssus_gpio_map, + .core_dirq = &core_dedicated_irq, + .sus_dirq = &sus_dedicated_irq, +}; + +struct soc_gpio_config* mainboard_get_gpios(void) +{ + return &gpio_config; +} diff --git a/src/mainboard/google/rambi/variants/swanky/include/variant/acpi/dptf.asl b/src/mainboard/google/rambi/variants/swanky/include/variant/acpi/dptf.asl new file mode 100644 index 0000000..e9b78a8 --- /dev/null +++ b/src/mainboard/google/rambi/variants/swanky/include/variant/acpi/dptf.asl @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define DPTF_CPU_PASSIVE 80 +#define DPTF_CPU_CRITICAL 90 + +#define DPTF_TSR0_SENSOR_ID 1 +#define DPTF_TSR0_SENSOR_NAME "TMP432_Internal" +#define DPTF_TSR0_PASSIVE 48 +#define DPTF_TSR0_CRITICAL 70 + +#define DPTF_TSR1_SENSOR_ID 2 +#define DPTF_TSR1_SENSOR_NAME "TMP432_Power_top" +#define DPTF_TSR1_PASSIVE 60 +#define DPTF_TSR1_CRITICAL 70 + +#define DPTF_TSR2_SENSOR_ID 3 +#define DPTF_TSR2_SENSOR_NAME "TMP432_CPU_bottom" +#define DPTF_TSR2_PASSIVE 55 +#define DPTF_TSR2_CRITICAL 70 + +#define DPTF_ENABLE_CHARGER + +/* Charger performance states, board-specific values from charger and EC */ +Name (CHPS, Package () { + Package () { 0, 0, 0, 0, 255, 0x6a4, "mA", 0 }, /* 1.7A (MAX) */ + Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 }, /* 1.5A */ + Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 }, /* 1.0A */ + Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 }, /* 0.5A */ + Package () { 0, 0, 0, 0, 0, 0x080, "mA", 0 }, /* 0.128A */ +}) diff --git a/src/mainboard/google/rambi/variants/swanky/include/variant/acpi/mainboard.asl b/src/mainboard/google/rambi/variants/swanky/include/variant/acpi/mainboard.asl new file mode 100644 index 0000000..3cdd5c0 --- /dev/null +++ b/src/mainboard/google/rambi/variants/swanky/include/variant/acpi/mainboard.asl @@ -0,0 +1,16 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Elan trackpad */ +#include <mainboard/google/rambi/acpi/trackpad_elan.asl> diff --git a/src/mainboard/google/rambi/variants/swanky/include/variant/onboard.h b/src/mainboard/google/rambi/variants/swanky/include/variant/onboard.h new file mode 100644 index 0000000..f4ffed5 --- /dev/null +++ b/src/mainboard/google/rambi/variants/swanky/include/variant/onboard.h @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ONBOARD_H +#define ONBOARD_H + +#include <mainboard/google/rambi/irqroute.h> + +/* PCH wake signal from EC. */ +#define BOARD_PCH_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(0) + +#define BOARD_TRACKPAD_NAME "trackpad" +#define BOARD_TRACKPAD_IRQ GPIO_S0_DED_IRQ(TPAD_IRQ_OFFSET) +#define BOARD_TRACKPAD_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(1) +#define BOARD_TRACKPAD_I2C_BUS 0 +#define BOARD_TRACKPAD_I2C_ADDR 0x15 + +#define BOARD_I8042_IRQ GPIO_S0_DED_IRQ(I8042_IRQ_OFFSET) +#define BOARD_CODEC_IRQ GPIO_S5_DED_IRQ(CODEC_IRQ_OFFSET) + +#endif diff --git a/src/mainboard/google/rambi/variants/swanky/include/variant/variant.h b/src/mainboard/google/rambi/variants/swanky/include/variant/variant.h new file mode 100644 index 0000000..483983b --- /dev/null +++ b/src/mainboard/google/rambi/variants/swanky/include/variant/variant.h @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef VARIANT_H +#define VARIANT_H + +/* + * RAM_ID[2:0] are on GPIO_SSUS[39:37] + * 0b000 - 2GiB total - 1 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz + * 0b001 - 2GiB total - 1 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + * 0b010 - 4GiB total - 2 x 2GiB Samsung K4B4G1646Q-HYK0 1600MHz + * 0b011 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz + */ + +static const uint32_t dual_channel_config = + (1 << 2) | (1 << 3); + +#define SPD_SIZE 256 +#define GPIO_SSUS_37_PAD 57 +#define GPIO_SSUS_38_PAD 50 +#define GPIO_SSUS_39_PAD 58 + +#endif diff --git a/src/mainboard/google/rambi/variants/winky/Makefile.inc b/src/mainboard/google/rambi/variants/winky/Makefile.inc new file mode 100644 index 0000000..962f30c --- /dev/null +++ b/src/mainboard/google/rambi/variants/winky/Makefile.inc @@ -0,0 +1,45 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +SPD_BIN = $(obj)/spd.bin + +# Order matters for SPD sources. The following indicies +# define the SPD data to use. +# 0b000 - 4GiB total - 2 x 2GB - micron HTTC4G63CFR-PBA_x16_4Gb +# 0b001 - 4GiB total - 2 x Samsung_2Gib_K4B4G1646Q-HYK0 +# 0b010 - 2GiB total - 2 x 1GiB Micron MT41K128M16JT-125:K 1600MHz +# 0b011 - 2GiB total - 2 x 1GiB Hynix H5TC2G63FFR-PBA 1600MHz +# 0b100 - 2GiB total - 1 x 2GB - micron HTTC4G63CFR-PBA_x16_4Gb +# 0b101 - 2GiB total - 1 x Samsung_2Gib_K4B4G1646Q-HYK0 +SPD_SOURCES = HT_micron_HTTC4G63CFR-PBA_x16_4Gb +SPD_SOURCES += Samsung_2Gib_K4B4G1646Q-HYK0 +SPD_SOURCES += micron_1GiB_dimm_MT41K128M16JT-125 +SPD_SOURCES += hynix_1GiB_dimm_H5TC2G63FFR-PBA +SPD_SOURCES += HT_micron_HTTC4G63CFR-PBA_x16_4Gb +SPD_SOURCES += Samsung_2Gib_K4B4G1646Q-HYK0 + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex) + +# Include spd ROM data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/google/rambi/variants/winky/devicetree.cb b/src/mainboard/google/rambi/variants/winky/devicetree.cb new file mode 100644 index 0000000..6d52b89 --- /dev/null +++ b/src/mainboard/google/rambi/variants/winky/devicetree.cb @@ -0,0 +1,102 @@ +chip soc/intel/baytrail + + # SATA port enable mask (2 ports) + register "sata_port_map" = "0x1" + register "sata_ahci" = "0x1" + register "ide_legacy_combined" = "0x0" + + # Route USB ports to XHCI + register "usb_route_to_xhci" = "1" + + # USB Port Disable Mask + register "usb2_port_disable_mask" = "0x0" + register "usb3_port_disable_mask" = "0x0" + + # USB PHY settings + # TODO: These values are from Baytrail and need tuned for Winky board + register "usb2_comp_bg" = "0x4680" + register "usb2_per_port_lane0" = "0x0004C209" + register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" + register "usb2_per_port_lane1" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" + register "usb2_per_port_lane2" = "0x00049209" + register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" + register "usb2_per_port_lane3" = "0x0004B209" + register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" + + # LPE audio codec settings + register "lpe_codec_clk_freq" = "25" # 25MHz clock + register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] + + # SD Card controller + register "sdcard_cap_low" = "0x036864b2" + register "sdcard_cap_high" = "0x0" + + # Enable devices in ACPI mode + register "lpe_acpi_mode" = "1" + register "lpss_acpi_mode" = "1" + register "scc_acpi_mode" = "1" + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + # Enable PIPEA as DP_C + register "gpu_pipea_port_select" = "2" # DP_C + register "gpu_pipea_power_cycle_delay" = "6" # 600ms + register "gpu_pipea_power_on_delay" = "5000" # 500ms + register "gpu_pipea_light_on_delay" = "70" # 7ms + register "gpu_pipea_power_off_delay" = "500" # 50ms + register "gpu_pipea_light_off_delay" = "2000" # 200ms + + # VR PS2 control + register "vnn_ps2_enable" = "1" + register "vcc_ps2_enable" = "1" + + # Disable SLP_X stretching after SUS power well fail. + register "disable_slp_x_stretch_sus_fail" = "1" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # SoC router + device pci 02.0 on end # GFX + device pci 11.0 off end # SDIO + device pci 12.0 on end # SD + device pci 13.0 on end # SATA + device pci 14.0 on end # XHCI + device pci 15.0 on end # LPE + device pci 17.0 on end # MMC + device pci 18.0 on end # SIO_DMA1 + device pci 18.1 on end # I2C1 + device pci 18.2 on end # I2C2 + device pci 18.3 off end # I2C3 + device pci 18.4 off end # I2C4 + device pci 18.5 off end # I2C5 + device pci 18.6 off end # I2C6 + device pci 18.7 off end # I2C7 + device pci 1a.0 on end # TXE + device pci 1b.0 on end # HDA + device pci 1c.0 on end # PCIE_PORT1 + device pci 1c.1 on end # PCIE_PORT2 + device pci 1c.2 off end # PCIE_PORT3 + device pci 1c.3 off end # PCIE_PORT4 + device pci 1d.0 on end # EHCI + device pci 1e.0 on end # SIO_DMA2 + device pci 1e.1 off end # PWM1 + device pci 1e.2 off end # PWM2 + device pci 1e.3 off end # HSUART1 + device pci 1e.4 off end # HSUART2 + device pci 1e.5 off end # SPI + device pci 1f.0 on + chip ec/google/chromeec + # We only have one init function that + # we need to call to initialize the + # keyboard part of the EC. + device pnp ff.1 on # dummy address + end + end + end # LPC Bridge + device pci 1f.3 off end # SMBus + end +end diff --git a/src/mainboard/google/rambi/variants/winky/gpio.c b/src/mainboard/google/rambi/variants/winky/gpio.c new file mode 100644 index 0000000..dcdf6f5 --- /dev/null +++ b/src/mainboard/google/rambi/variants/winky/gpio.c @@ -0,0 +1,228 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdlib.h> +#include <soc/gpio.h> +#include <mainboard/google/rambi/irqroute.h> + +/* NCORE GPIOs */ +static const struct soc_gpio_map gpncore_gpio_map[] = { + GPIO_FUNC2, /* S0_NC00 - INT_HDMI_HPD - INT */ + GPIO_FUNC2, /* S0_NC01 - HDMI_DDCDATA_SW */ + GPIO_FUNC2, /* S0_NC02 - HDMI_DDCCLK_SW */ + GPIO_NC, /* S0_NC03 - NC */ + GPIO_NC, /* S0_NC04 - NC */ + GPIO_NC, /* S0_NC05 - NC */ + GPIO_FUNC2, /* S0_NC06 - EDP_HPD_L */ + GPIO_INPUT, /* S0_NC07 - DDI1_DDCDATA - STRAP */ + GPIO_NC, /* S0_NC08 - NC */ + GPIO_OUT_HIGH, /* S0_NC09 - SOC_DISP_ON_C */ + GPIO_FUNC2, /* S0_NC10 - SOC_EDP_BLON_C */ + GPIO_FUNC2, /* S0_NC11 - SOC_DPST_PWM_C */ + GPIO_NC, /* S0_NC12 - NC */ + GPIO_INPUT, /* S0_NC13 - GPIO_NC13 - STRAP */ + GPIO_NC, /* S0_NC14 - NC */ + GPIO_DEFAULT, /* S0_NC15 - XDP_GPIO_S0_NC15 */ + GPIO_DEFAULT, /* S0_NC16 - XDP_GPIO_S0_NC16 */ + GPIO_DEFAULT, /* S0_NC17 - XDP_GPIO_S0_NC17 */ + GPIO_DEFAULT, /* S0_NC18 - XDP_GPIO_S0_NC18 */ + GPIO_DEFAULT, /* S0_NC19 - XDP_GPIO_S0_NC19 */ + GPIO_DEFAULT, /* S0_NC20 - XDP_GPIO_S0_NC20 */ + GPIO_DEFAULT, /* S0_NC21 - XDP_GPIO_S0_NC21 */ + GPIO_DEFAULT, /* S0_NC22 - XDP_GPIO_S0_NC22 */ + GPIO_DEFAULT, /* S0_NC23 - XDP_GPIO_S0_NC23 */ + GPIO_NC, /* S0_NC24 - NC */ + GPIO_NC, /* S0_NC25 - NC */ + GPIO_NC, /* S0_NC26 - NC */ + GPIO_END +}; + +/* SCORE GPIOs */ +static const struct soc_gpio_map gpscore_gpio_map[] = { + GPIO_ACPI_SCI, /* S0_SC000 - SOC_KBC_SCI - INT */ + GPIO_FUNC2, /* S0_SC001 - SATA_DEVSLP_C */ + GPIO_NC, /* S0-SC002 - SATA_LED_R_N (NC/PU) */ + GPIO_FUNC1, /* S0-SC003 - PCIE_CLKREQ_IMAGE# */ + GPIO_FUNC1, /* S0-SC004 - PCIE_CLKREQ_WLAN# */ + GPIO_NC, /* S0-SC005 - PCIE_CLKREQ_LAN# (NC) */ + GPIO_NC, /* S0-SC006 - PCIE_CLKREQ3# (NC) */ + GPIO_FUNC(2, PULL_DISABLE, 10K), /* S0-SC007 - SD3_WP external pull */ + GPIO_NC, /* S0-SC008 - ACZ_RST# (NC) */ + GPIO_NC, /* S0-SC009 - ACZ_SYNC (NC) */ + GPIO_NC, /* S0-SC010 - ACZ_BCLK (NC) */ + GPIO_NC, /* S0-SC011 - ACZ_STDOUT (NC) */ + GPIO_NC, /* S0-SC012 - PCH_AZ_CODEC_SDIN0 (NC) */ + GPIO_NC, /* S0-SC013 - NC */ + GPIO_INPUT, /* S0-SC014 - DET_TRIGGER - INT */ + GPIO_INPUT, /* S0-SC015 - AJACK_MICPRES_L - INT */ + GPIO_FUNC(3, PULL_DOWN, 20K), /* S0-SC016 - MMC1_45_CLK */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC017 - MMC1_45_D[0] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC018 - MMC1_45_D[1] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC019 - MMC1_45_D[2] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC020 - MMC1_45_D[3] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC021 - MMC1_45_D[4] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC022 - MMC1_45_D[5] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC023 - MMC1_45_D[6] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC024 - MMC1_45_D[7] */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC025 - MMC1_45_CMD */ + GPIO_FUNC(3, PULL_UP, 20K), /* S0-SC026 - MMC1_45_RST */ + GPIO_NC, /* S0-SC027 - NC */ + GPIO_NC, /* S0-SC028 - NC */ + GPIO_NC, /* S0-SC029 - NC */ + GPIO_NC, /* S0-SC030 - NC */ + GPIO_NC, /* S0-SC031 - NC */ + GPIO_NC, /* S0-SC032 - NC */ + GPIO_FUNC(1, PULL_DOWN, 20K), /* S0-SC033 - SD3_CLK */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC034 - SD3_D0 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC035 - SD3_D1 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC036 - SD3_D2 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC037 - SD3_D3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC038 - SD3_CD# */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC039 - SD3_CMD */ + GPIO_NC, /* S0-SC040 - SDMMC3_1P8_EN - TP3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC041 - SDIO3_PWR_EN# */ + GPIO_FUNC1, /* S0-SC042 - LPC_LAD0 */ + GPIO_FUNC1, /* S0-SC043 - LPC-LAD1 */ + GPIO_FUNC1, /* S0-SC044 - LPC_LAD2 */ + GPIO_FUNC1, /* S0-SC045 - LPC_LAD3 */ + GPIO_FUNC1, /* S0-SC046 - LPC_LFRAME# */ + GPIO_FUNC1, /* S0-SC047 - PCLK_TPM */ + GPIO_FUNC1, /* S0-SC048 - CLK_PCI_EC */ + GPIO_FUNC1, /* S0-SC049 - LPC_CLKRUN_L */ + GPIO_NC, /* S0-SC050 - IRQ_SERIRQ */ + GPIO_NC, /* S0-SC051 - SMB_SOC_DATA (XDP) */ + GPIO_NC, /* S0-SC052 - SMB_SOC_CLK (XDP) */ + GPIO_NC, /* S0-SC053 - SMB_SOC_ALERTB (NC) */ + GPIO_DEFAULT, /* S0-SC054 - NC */ + GPIO_DIRQ, /* S0-SC055 - TRACKPAD_INT_DX */ + GPIO_INPUT, /* S0-SC056 - GPIO_S0_SC_56 - STRAP */ + GPIO_FUNC1, /* S0-SC057 - PCH_UART_TXD */ + GPIO_INPUT, /* S0-SC058 - SIM_DET_C */ + GPIO_INPUT_LEGACY, /* S0-SC059 - EC_IN_RW_C */ + GPIO_NC, /* S0-SC060 - NC */ + GPIO_FUNC1, /* S0-SC061 - SOC_UART_RX */ + GPIO_FUNC1, /* S0-SC062 - I2S_BCLK */ + GPIO_FUNC1, /* S0-SC063 - I2S_LRCLK */ + GPIO_FUNC1, /* S0-SC064 - I2S_DIN */ + GPIO_FUNC1, /* S0-SC065 - I2S_DOUT */ + GPIO_FUNC1, /* S0-SC066 - SIO_SPI_CS# */ + GPIO_FUNC1, /* S0-SC067 - SIO_SPI_MISO */ + GPIO_FUNC1, /* S0-SC068 - SIO_SPI_MOSI */ + GPIO_FUNC1, /* S0-SC069 - SIO_SPI_CLK */ + GPIO_NC, /* S0-SC070 - ALS_INT_L - INT */ + GPIO_NC, /* S0-SC071 - NC */ + GPIO_NC, /* S0-SC072 - TOUCH_INT_L_DX */ + GPIO_NC, /* S0-SC073 - NC */ + GPIO_NC, /* S0-SC074 - SIO_UART2_RXD (NC) */ + GPIO_NC, /* S0-SC075 - SIO_UART2_TXD (NC) */ + GPIO_INPUT, /* S0-SC076 - BIOS_STRAP - STRAP */ + GPIO_INPUT, /* S0-SC077 - SOC_OVERRIDE - STRAP */ + GPIO_FUNC1, /* S0-SC078 - I2C_0_SDA */ + GPIO_FUNC1, /* S0-SC079 - I2C_0_SCL */ + GPIO_FUNC1, /* S0-SC080 - I2C_1_SDA */ + GPIO_FUNC1, /* S0-SC081 - I2C_1_SCL */ + GPIO_NC, /* S0-SC082 - NC */ + GPIO_NC, /* S0-SC083 - NC */ + GPIO_NC, /* S0-SC084 - NC */ + GPIO_NC, /* S0-SC085 - NC */ + GPIO_NC, /* S0-SC086 - NC */ + GPIO_NC, /* S0-SC087 - NC */ + GPIO_NC, /* S0-SC088 - NC */ + GPIO_NC, /* S0-SC089 - NC */ + GPIO_NC, /* S0-SC090 - NC */ + GPIO_NC, /* S0-SC091 - NC */ + GPIO_NC, /* S0-SC092 - I2C_NGFF_SDA (NC/PU) */ + GPIO_NC, /* S0-SC093 - I2C_NGFF_SCL (NC/PU) */ + GPIO_NC, /* S0-SC094 - NC */ + GPIO_NC, /* S0-SC095 - SIO_PWM1 (NC) */ + GPIO_FUNC1, /* S0-SC096 - I2S_MCLK */ + GPIO_NC, /* S0-SC097 - NC */ + GPIO_NC, /* S0-SC098 - NC */ + GPIO_NC, /* S0-SC099 - NC */ + GPIO_NC, /* S0-SC100 - NC */ + GPIO_DIRQ, /* S0-SC101 - KBD_IRQ# */ + GPIO_END +}; + +/* SSUS GPIOs */ +static const struct soc_gpio_map gpssus_gpio_map[] = { + GPIO_ACPI_WAKE, /* S500 - PCH_WAKE# */ + GPIO_ACPI_WAKE, /* S501 - TRACKPAD_INT# - INT */ + GPIO_NC, /* S502 - TOUCH_INT# - INT */ + GPIO_NC, /* S503 - LTE_WAKE_L# - INT */ + GPIO_NC, /* S504 - SOC_JTAG2_TDO (NC/PU) */ + GPIO_NC, /* S505 - SUS_CLK_WLAN (NC) */ + GPIO_INPUT_PU, /* S506 - PCH_SPI_WP */ + GPIO_ACPI_SMI, /* S507 - SOC_KBC_SMI - INT */ + GPIO_NC, /* S508 - NC */ + GPIO_DIRQ, /* S509 - MUX_AUD_INT1# */ + GPIO_OUT_HIGH, /* S510 - WIFI_DISABLE_L */ + GPIO_FUNC0, /* S511 - SUSPWRDNACK */ + GPIO_FUNC0, /* S512 - WIFI_SUSCLK */ + GPIO_FUNC0, /* S513 - SLP_SX */ + GPIO_NC, /* S514 - NC */ + GPIO_FUNC0, /* S515 - WLAN_WAKE_L - INT */ + GPIO_FUNC0, /* S516 - PCH_PWRBTN_L */ + GPIO_NC, /* S517 - NC */ + GPIO_FUNC0, /* S518 - SUS_STAT# */ + GPIO_FUNC0, /* S519 - USB_OC0# */ + GPIO_FUNC0, /* S520 - USB_OC1# */ + GPIO_NC, /* S521 - NC */ + GPIO_NC, /* S522 - XDP_GPIO_DFX0 */ + GPIO_NC, /* S523 - XDP_GPIO_DFX1 */ + GPIO_NC, /* S524 - XDP_GPIO_DFX2 */ + GPIO_NC, /* S525 - XDP_GPIO_DFX3 */ + GPIO_NC, /* S526 - XDP_GPIO_DFX4 */ + GPIO_NC, /* S527 - XDP_GPIO_DFX5 */ + GPIO_NC, /* S528 - XDP_GPIO_DFX6 */ + GPIO_NC, /* S529 - XDP_GPIO_DFX7 */ + GPIO_NC, /* S530 - XDP_GPIO_DFX8 */ + GPIO_NC, /* S531 - NC */ + GPIO_NC, /* S532 - NC */ + GPIO_NC, /* S533 - NC */ + GPIO_NC, /* S534 - NC */ + GPIO_OUT_HIGH, /* S535 - LTE_DISABLE_L */ + GPIO_NC, /* S536 - NC */ + GPIO_INPUT, /* S537 - RAM_ID0 */ + GPIO_INPUT, /* S538 - RAM_ID1 */ + GPIO_INPUT, /* S539 - RAM_ID2 */ + GPIO_NC, /* S540 - NC */ + GPIO_NC, /* S541 - NC */ + GPIO_NC, /* S542 - NC */ + GPIO_NC, /* S543 - NC */ + GPIO_END +}; + +static const u8 core_dedicated_irq[GPIO_MAX_DIRQS] = { + [TPAD_IRQ_OFFSET] = TPAD_IRQ_GPIO, + [I8042_IRQ_OFFSET] = I8042_IRQ_GPIO, +}; + +static const u8 sus_dedicated_irq[GPIO_MAX_DIRQS] = { + [CODEC_IRQ_OFFSET] = CODEC_IRQ_GPIO, +}; + +static struct soc_gpio_config gpio_config = { + .ncore = gpncore_gpio_map, + .score = gpscore_gpio_map, + .ssus = gpssus_gpio_map, + .core_dirq = &core_dedicated_irq, + .sus_dirq = &sus_dedicated_irq, +}; + +struct soc_gpio_config* mainboard_get_gpios(void) +{ + return &gpio_config; +} diff --git a/src/mainboard/google/rambi/variants/winky/include/variant/acpi/dptf.asl b/src/mainboard/google/rambi/variants/winky/include/variant/acpi/dptf.asl new file mode 100644 index 0000000..3530d7b --- /dev/null +++ b/src/mainboard/google/rambi/variants/winky/include/variant/acpi/dptf.asl @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define DPTF_CPU_PASSIVE 80 +#define DPTF_CPU_CRITICAL 90 + +#define DPTF_TSR0_SENSOR_ID 1 +#define DPTF_TSR0_SENSOR_NAME "TMP432_Internal" +#define DPTF_TSR0_PASSIVE 48 +#define DPTF_TSR0_CRITICAL 70 + +#define DPTF_TSR1_SENSOR_ID 2 +#define DPTF_TSR1_SENSOR_NAME "TMP432_Power_top" +#define DPTF_TSR1_PASSIVE 60 +#define DPTF_TSR1_CRITICAL 70 + +#define DPTF_TSR2_SENSOR_ID 3 +#define DPTF_TSR2_SENSOR_NAME "TMP432_CPU_bottom" +#define DPTF_TSR2_PASSIVE 55 +#define DPTF_TSR2_CRITICAL 70 + +#define DPTF_ENABLE_CHARGER + +/* Charger performance states, board-specific values from charger and EC */ +Name (CHPS, Package () { + Package () { 0, 0, 0, 0, 255, 0x6a4, "mA", 0 }, /* 1.7A (MAX) */ + Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 }, /* 1.5A */ + Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 }, /* 1.0A */ + Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 }, /* 0.5A */ + Package () { 0, 0, 0, 0, 0, 0x080, "mA", 0 }, /* 0.128A */ +}) diff --git a/src/mainboard/google/rambi/variants/winky/include/variant/acpi/mainboard.asl b/src/mainboard/google/rambi/variants/winky/include/variant/acpi/mainboard.asl new file mode 100644 index 0000000..184ef83 --- /dev/null +++ b/src/mainboard/google/rambi/variants/winky/include/variant/acpi/mainboard.asl @@ -0,0 +1,16 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Atmel trackpad */ +#include <mainboard/google/rambi/acpi/trackpad_atmel.asl> diff --git a/src/mainboard/google/rambi/variants/winky/include/variant/onboard.h b/src/mainboard/google/rambi/variants/winky/include/variant/onboard.h new file mode 100644 index 0000000..9771179 --- /dev/null +++ b/src/mainboard/google/rambi/variants/winky/include/variant/onboard.h @@ -0,0 +1,34 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ONBOARD_H +#define ONBOARD_H + +#include <mainboard/google/rambi/irqroute.h> + +/* PCH wake signal from EC. */ +#define BOARD_PCH_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(0) + +#define BOARD_TRACKPAD_NAME "trackpad" +#define BOARD_TRACKPAD_IRQ GPIO_S0_DED_IRQ(TPAD_IRQ_OFFSET) +#define BOARD_TRACKPAD_WAKE_GPIO ACPI_ENABLE_WAKE_SUS_GPIO(1) +#define BOARD_TRACKPAD_I2C_BUS 0 +#define BOARD_TRACKPAD_I2C_ADDR 0x4b + +#define BOARD_I8042_IRQ GPIO_S0_DED_IRQ(I8042_IRQ_OFFSET) +#define BOARD_CODEC_IRQ GPIO_S5_DED_IRQ(CODEC_IRQ_OFFSET) +#define BOARD_ALS_IRQ GPIO_S0_DED_IRQ(ALS_IRQ_OFFSET) + +#endif diff --git a/src/mainboard/google/rambi/variants/winky/include/variant/variant.h b/src/mainboard/google/rambi/variants/winky/include/variant/variant.h new file mode 100644 index 0000000..6bf5569 --- /dev/null +++ b/src/mainboard/google/rambi/variants/winky/include/variant/variant.h @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef VARIANT_H +#define VARIANT_H + +/* + * RAM_ID[2:0] are on GPIO_SSUS[39:37] + * 0b000 - 4GiB total - 2 x 2GiB Micron MT41K256M16HA-125:E 1600MHz + * 0b001 - 4GiB total - 2 x 2GiB Samsung K4B4G1646Q-HYK0 + * 0b010 - 2GiB total - 2 x 1GiB Micron MT41K128M16JT-125:K 1600MHz + * 0b011 - 2GiB total - 2 x 1GiB Hynix H5TC2G63FFR-PBA 1600MHz + * 0b100 - 2GiB total - 1 x 2GiB Micron MT41K256M16HA-125:E 1600MHz + * 0b101 - 2GiB total - 1 x 2GiB Samsung K4B4G1646Q-HYK0 + */ + +static const uint32_t dual_channel_config = + (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3); + +#define SPD_SIZE 256 +#define GPIO_SSUS_37_PAD 57 +#define GPIO_SSUS_38_PAD 50 +#define GPIO_SSUS_39_PAD 58 + +#endif

1 0

Patch set updated for coreboot: device/dram/ddr2: Add common ddr2 spd decoder
by Patrick Rudolph Jan. 31, 2017

Jan. 31, 2017

Patrick Rudolph (siro(a)das-labor.org) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/18273 -gerrit commit 09b794a2ea8f3e638603063f8f1f4fd60878c72b Author: Patrick Rudolph <siro(a)das-labor.org> Date: Tue Jan 31 19:43:17 2017 +0100 device/dram/ddr2: Add common ddr2 spd decoder Decode DDR2 SPD similar to DDR3 SPD decoder to ease readability, reduce code complexity and reduce size of maintainable code. Change-Id: I741f0e61ab23e3999ae9e31f57228ba034c2509e Signed-off-by: Patrick Rudolph <siro(a)das-labor.org> --- src/device/dram/ddr2.c | 563 +++++++++++++++++++++++++++++++++++++++++ src/include/device/dram/ddr2.h | 201 +++++++++++++++ 2 files changed, 764 insertions(+) diff --git a/src/device/dram/ddr2.c b/src/device/dram/ddr2.c new file mode 100644 index 0000000..e8791c7 --- /dev/null +++ b/src/device/dram/ddr2.c @@ -0,0 +1,563 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Patrick Rudolph <siro(a)das-labor.org> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/** + * @file ddr2.c + * + * \brief Utilities for decoding DDR2 SPDs + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/dram/ddr2.h> +#include <string.h> + +/*============================================================================== + * = DDR2 SPD decoding helpers + *----------------------------------------------------------------------------*/ + +/** + * \brief Checks if the DIMM is Registered based on byte[20] of the SPD + * + * Tells if the DIMM type is registered or not. + * + * @param type DIMM type. This is byte[20] of the SPD. + */ +int dimm_is_registered(enum spd_dimm_type type) +{ + if ((type == SPD_DIMM_TYPE_RDIMM) + | (type == SPD_DIMM_TYPE_72B_SO_RDIMM)) + return 1; + + return 0; +} + +/** + * \brief Calculate the checksum of a DDR2 SPD unique identifier + * + * @param spd pointer to raw SPD data + * @param len length of data in SPD + * + * @return the checksum of SPD data bytes 63, or 0 when spd data is truncated. + */ +u8 spd_ddr2_calc_checksum(u8 *spd, int len) +{ + int i; + u8 c = 0; + + if (len < 63) + /* Not enough bytes available to get the checksum */ + return 0; + + for (i = 0; i < 63; i++) + c += spd[i]; + + return c; +} + +/** + * \brief Return size of SPD. + * + * Returns size of SPD. Usually 128 Byte. + */ +u32 spd_decode_spd_size_ddr2(u8 byte0) +{ + return byte0; +} + +/** + * \brief Return size of eeprom. + * + * Returns size of eeprom. Usually 256 Byte. + */ +u32 spd_decode_eeprom_size_ddr2(u8 byte1) +{ + if (!byte1) + return 0; + + if (byte1 > 0x0e) + return 0x3fff; + + return 1 << byte1; +} + +/** + * \brief Return index of MSB set + * + * Returns the index fof MSB set. + */ +static u8 spd_get_msbs(u8 c) +{ + int i; + for (i = 7; i >= 0; i--) + if (c & (1 << i)) + return i; + + return 0; +} + +/** + * \brief Decode SPD tck cycle time + * + * Decodes a raw SPD data from a DDR2 DIMM. + * Returns cycle time in 1/256th ns. + */ +static u32 spd_decode_tck_time(u8 c) +{ + u8 high, low; + + high = c >> 4; + + low = c & 0xf; + if (low == 0x0A) + low = 25; + else if (low == 0x0B) + low = 33; + else if (low == 0x0C) + low = 66; + else if (low == 0x0D) + low = 75; + + return (high << 8) + ((low << 8) / 10); +} + +/** + * \brief Decode SPD bcd style timings + * + * Decodes a raw SPD data from a DDR2 DIMM. + * Returns cycle time in 1/256th ns. + */ +static u32 spd_decode_bcd_time(u8 c) +{ + u8 high, low; + + high = c >> 4; + low = c & 0xf; + + return (high << 8) + ((low << 8) / 10); +} + +/** + * \brief Decode SPD tRP, tRRP cycle time + * + * Decodes a raw SPD data from a DDR2 DIMM. + * Returns cycle time in 1/256th ns. + */ +static u32 spd_decode_quarter_time(u8 c) +{ + u8 high, low; + + high = c >> 6; + + low = c & 0x3; + + if (low == 1) + low = 25; + else if (low == 2) + low = 50; + else if (low == 3) + low = 75; + + return (high << 8) + ((low << 8) / 10); +} + +/** + * \brief Decode SPD tRR time + * + * Decodes a raw SPD data from a DDR2 DIMM. + * Returns cycle time in 1/256th us. + */ +static u32 spd_decode_tRR_time(u8 c) +{ + switch (c) { + default: + case 0: + return 15625 << 8; + case 1: + return 15625 << 6; + case 2: + return 15625 << 7; + case 3: + return 15625 << 9; + case 4: + return 15625 << 10; + case 5: + return 15625 << 11; + } +} + +/** + * \brief Decode SPD tRP,tRFC time + * + * Decodes a raw SPD data from a DDR2 DIMM. + * Returns cycle time in 1/256th us. + */ +static void spd_decode_tRPtRFC_time(u8 *spd_40_41_42, u32 *tRC, u32 tRFC) +{ + u8 b40, b41, b42; + + b40 = spd_40_41_42[0]; + b41 = spd_40_41_42[1]; + b42 = spd_40_41_42[2]; + + *tRC = b41 << 8; + *tRFC = b42 << 8; + + if (b40 & 0x01) + *tRFC += 256 << 8; + + switch ((b40 >> 1) & 0x07) { + case 1: + *tRFC += (25 << 8) / 100; + break; + case 2: + *tRFC += (33 << 8) / 100; + break; + case 3: + *tRFC += (50 << 8) / 100; + break; + case 4: + *tRFC += (66 << 8) / 100; + break; + case 5: + *tRFC += (75 << 8) / 100; + break; + default: + break; + } + + switch ((b40 >> 4) & 0x07) { + case 1: + *tRC += (25 << 8) / 100; + break; + case 2: + *tRC += (33 << 8) / 100; + break; + case 3: + *tRC += (50 << 8) / 100; + break; + case 4: + *tRC += (66 << 8) / 100; + break; + case 5: + *tRC += (75 << 8) / 100; + break; + default: + break; + } +} + +/** + * \brief Decode the raw SPD data + * + * Decodes a raw SPD data from a DDR2 DIMM, and organizes it into a + * @ref dimm_attr structure. The SPD data must first be read in a contiguous + * array, and passed to this function. + * + * @param dimm pointer to @ref dimm_attr structure where the decoded data is to + * be stored + * @param spd array of raw data previously read from the SPD. + * + * @return @ref spd_status enumerator + * SPD_STATUS_OK -- decoding was successful + * SPD_STATUS_INVALID -- invalid SPD or not a DDR2 SPD + * SPD_STATUS_CRC_ERROR -- CRC did not verify + * SPD_STATUS_INVALID_FIELD -- A field with an invalid value was + * detected. + */ +int spd_decode_ddr2(dimm_attr *dimm, spd_raw_data spd) +{ + int ret; + u16 eeprom_size; + u8 spd_size; + u8 cl; + u8 reg8; + + spd_size = spd_decode_spd_size_ddr2(spd[0]); + eeprom_size = spd_decode_eeprom_size_ddr2(spd[1]); + + printram("EEPROM with 0x%04x bytes\n", eeprom_size); + printram("SPD contains 0x%02x bytes\n", spd_size); + + if (spd_size < 64 || eeprom_size < 64) { + printram("ERROR: SPD to small\n"); + dimm->dram_type = SPD_MEMORY_TYPE_UNDEFINED; + return SPD_STATUS_INVALID; + } + + if (spd_ddr2_calc_checksum(spd, spd_size) != spd[63]) { + printram("ERROR: SPD checksum error\n"); + dimm->dram_type = SPD_MEMORY_TYPE_UNDEFINED; + return SPD_STATUS_INVALID; + } + + reg8 = spd[62]; + if ((reg8 & 0xf0) != 0x10) { + printram("ERROR: Unsupported SPD revision %01x.%01x\n", + revision >> 4, revision & 0xf); + dimm->dram_type = SPD_MEMORY_TYPE_UNDEFINED; + return SPD_STATUS_INVALID; + } + printram(" Revision : %x\n", reg8); + + reg8 = spd[2]; + if (reg8 != 0x08) { + printram("ERROR: Unsupported SPD type %x\n", reg8); + dimm->dram_type = SPD_MEMORY_TYPE_UNDEFINED; + return SPD_STATUS_INVALID; + } + printram(" Type : %x\n", reg8); + dimm->dram_type = SPD_MEMORY_TYPE_SDRAM_DDR2; + + dimm->row_bits = spd[3]; + if (dimm->row_bits > 31) { + printram(" Invalid number of memory rows\n"); + ret = SPD_STATUS_INVALID_FIELD; + } + printram(" Rows : %x\n", dimm->row_bits); + + dimm->col_bits = spd[4]; + if (dimm->col_bits > 16) { + printram(" Invalid number of memory columns\n"); + ret = SPD_STATUS_INVALID_FIELD; + } + printram(" Columns : %x\n", dimm->col_bits); + + dimm->ranks = spd[5] & 0x7; + printram(" Ranks : %x\n", dimm->ranks); + + dimm->mod_width = spd[6]; + printram(" Module width : x%u\n", dimm->mod_width); + + dimm->width = spd[13]; + printram(" Width : x%u\n", dimm->width); + + dimm->banks = spd[17]; + printram(" Banks : %x\n", dimm->banks); + + switch (spd[8]) { + case 0: + dimm->flags.operable_5_00V = 1; + printram(" Voltage : 5.0V\n"); + break; + case 1: + dimm->flags.operable_3_33V = 1; + printram(" Voltage : 3.3V\n"); + break; + case 2: + dimm->flags.operable_1_50V = 1; + printram(" Voltage : 1.5V\n"); + break; + case 3: + dimm->flags.operable_3_33V = 1; + printram(" Voltage : 3.3V\n"); + break; + case 4: + dimm->flags.operable_2_50V = 1 + printram(" Voltage : 2.5V\n"); + break; + case 5: + dimm->flags.operable_1_80V = 1; + printram(" Voltage : 1.8V\n"); + break; + default: + printram(" Unknown voltage level.\n"); + ret = SPD_STATUS_INVALID_FIELD; + } + + dimm->cas_supported = spd[18]; + if (dimm->cas_supported & 0x3) { + printram(" Invalid CAS support advertised.\n"); + ret = SPD_STATUS_INVALID_FIELD; + } + printram(" Supported CAS : 0x%x\n", dimm->cas_supported); + + cl = spd_get_msbs(dimm->cas_supported); + + dimm->cycle_time[cl] = spd_decode_tck_time(spd[9]); + dimm->access_time[cl] = spd_decode_bcd_time(spd[10]); + + if (dimm->cas_supported & (1 << (cl - 1))) { + dimm->cycle_time[cl - 1] = spd_decode_tck_time(spd[23]); + dimm->access_time[cl - 1] = spd_decode_bcd_time(spd[24]); + } + if (dimm->cas_supported & (1 << (cl - 2))) { + dimm->cycle_time[cl - 2] = spd_decode_tck_time(spd[25]); + dimm->access_time[cl - 2] = spd_decode_bcd_time(spd[26]); + } + + reg8 = (spd[31] >> 5) | (spd[31] << 3); + dimm->size_mb = 64 << reg8; + + if (reg8 < 0x08) + printram(" Capacity : %u Mb\n", 64 << reg8); + else + printram(" Capacity : %u Gb\n", 1 << (reg8 - 8)); + + + /* SDRAM Minimum Cycle Time (tCKmin) */ + dimm->tCK = spd_decode_tck_time(spd[43]); + /* Minimum Write Recovery Time (tWRmin) */ + dimm->tWR = spd_decode_quarter_time(spd[36]); + /* Minimum RAS# to CAS# Delay Time (tRCDmin) */ + dimm->tRCD = spd_decode_quarter_time(spd[29]); + /* Minimum Row Active to Row Active Delay Time (tRRDmin) */ + dimm->tRRD = spd_decode_quarter_time(spd[28]); + /* Minimum Row Precharge Delay Time (tRPmin) */ + dimm->tRP = spd_decode_quarter_time(spd[27]); + /* Minimum Active to Precharge Delay Time (tRASmin) */ + dimm->tRAS = spd[30] << 8; + /* Minimum Active to Active/Refresh Delay Time (tRCmin) */ + /* Minimum Refresh Recovery Delay Time (tRFCmin) */ + spd_decode_tRPtRFC_time(&spd[40], &dimm->tRC, &dimm->tRFC); + /* Minimum Internal Write to Read Command Delay Time (tWTRmin) */ + dimm->tWTR = spd_decode_quarter_time(spd[37]); + /* Minimum Internal Read to Precharge Command Delay Time (tRTPmin) */ + dimm->tRTP = spd_decode_quarter_time(spd[38]); + /* Data Input Setup Time Before Strobe */ + dimm->tDS = spd_decode_bcd_time(spd[34]); + /* Data Input Hold Time After Strobe */ + dimm->tDH = spd_decode_bcd_time(spd[35]); + /* SDRAM Device DQS-DQ Skew for DQS and associated DQ signals */ + dimm->tDQSQ = spd[44]; + /* SDRAM Device Read Data Hold Skew Factor */ + dimm->tQHS = spd[45]; + /* PLL Relock Time */ + dimm->tPLL = spd[46] << 8; + /* Refresh rate */ + dimm->tRR = spd_decode_tRR_time(spd[12]); + + /* SDRAM Thermal and Refresh Options */ + printram(" General features :"); + if (spd[22] & 0x04) { + dimm->flags.pasr = 1; + printram(" PASR"); + } + if (spd[22] & 0x02) { + dimm->flags.terminate_50ohms = 1; + printram(" 50Ohm"); + } + if (spd[22] & 0x01) { + dimm->flags.weak_driver = 1; + printram(" WEAK DRIVER"); + } + printram("\n"); + + /* SDRAM Supported Burst length */ + printram(" Burst length :"); + if (spd[16] & 0x06) { + dimm->flags.bl8 = 1; + printram(" BL8"); + } + if (spd[22] & 0x04) { + dimm->flags.bl4 = 1; + printram(" BL4"); + } + printram("\n"); + + dimm->dimm_type = spd[20] & SPD_DIMM_TYPE_MASK; + printram(" Dimm type : %x\n", dimm->dimm_type); + + dimm->flags.is_ecc = !!(spd[11] & 0x3); + printram(" ECC support : %x\n", dimm->flags.is_ecc); + + if (spd_size > 71) { + memcpy(&dimm->manufacturer_id, &spd[64], 4); + printram(" Manufacturer ID : %x\n", dimm->manufacturer_id); + } + + if (spd_size > 90) { + dimm->part_number[16] = 0; + memcpy(dimm->part_number, &spd[73], 16); + printram(" Part number : %s\n", dimm->part_number); + } + + return ret; +} + +/* + * The information printed below has a more informational character, and is not + * necessarily tied in to RAM init debugging. Hence, we stop using printram(), + * and use the standard printk()'s below. + */ + +static void print_ns(const char *msg, u32 val) +{ + u32 mant, fp; + mant = val / 256; + fp = (val % 256) * 1000 / 256; + + printk(BIOS_INFO, "%s%3u.%.3u ns\n", msg, mant, fp); +} + +static void print_us(const char *msg, u32 val) +{ + u32 mant, fp; + mant = val / 256; + fp = (val % 256) * 1000 / 256; + + printk(BIOS_INFO, "%s%3u.%.3u us\n", msg, mant, fp); +} + +/** +* \brief Print the info in DIMM +* +* Print info about the DIMM. Useful to use when CONFIG_DEBUG_RAM_SETUP is +* selected, or for a purely informative output. +* +* @param dimm pointer to already decoded @ref dimm_attr structure +*/ +void dram_print_spd_ddr2(const dimm_attr *dimm) +{ + u8 val8; + int i; + + printk(BIOS_INFO, " Row addr bits : %u\n", dimm->row_bits); + printk(BIOS_INFO, " Column addr bits : %u\n", dimm->col_bits); + printk(BIOS_INFO, " Number of ranks : %u\n", dimm->ranks); + printk(BIOS_INFO, " DIMM Capacity : %u MB\n", dimm->size_mb); + printk(BIOS_INFO, " Width : x%u\n", dimm->width); + printk(BIOS_INFO, " Banks : %u\n", dimm->banks); + + /* CAS Latencies Supported */ + val8 = dimm->cas_supported; + printk(BIOS_INFO, " CAS latencies :"); + i = 2; + do { + if (val8 & 1) + printk(BIOS_INFO, " %u", i); + i++; + val8 >>= 1; + } while (val8); + printk(BIOS_INFO, "\n"); + + print_ns(" tCKmin : ", dimm->tCK); + print_ns(" tWRmin : ", dimm->tWR); + print_ns(" tRCDmin : ", dimm->tRCD); + print_ns(" tRRDmin : ", dimm->tRRD); + print_ns(" tRPmin : ", dimm->tRP); + print_ns(" tRASmin : ", dimm->tRAS); + print_ns(" tRCmin : ", dimm->tRC); + print_ns(" tRFCmin : ", dimm->tRFC); + print_ns(" tWTRmin : ", dimm->tWTR); + print_ns(" tRTPmin : ", dimm->tRTP); + print_ns(" tDS : ", dimm->tDS); + print_ns(" tDH : ", dimm->tDH); + print_ns(" tDQSQ : ", dimm->tDQSQ); + print_ns(" tQHS : ", dimm->tQHS); + print_ns(" tPLL : ", dimm->tPLL); + print_us(" tRR : ", dimm->tRR); +} diff --git a/src/include/device/dram/ddr2.h b/src/include/device/dram/ddr2.h new file mode 100644 index 0000000..679164e --- /dev/null +++ b/src/include/device/dram/ddr2.h @@ -0,0 +1,201 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Patrick Rudolph <siro(a)das-labor.org> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * JEDEC Standard No. 21-C + * Annex J: Annex J: Serial Presence Detects for DDR2 SDRAM (Revision 1.3) + */ + +#ifndef DEVICE_DRAM_DDR2L_H +#define DEVICE_DRAM_DDR2L_H + +/** + * @file ddr2.h + * + * \brief Utilities for decoding DDR2 SPDs + */ + +#include <stdint.h> +#include <spd.h> + +/** + * \brief Convenience definitions for TCK values + * + * Different values for tCK, representing standard DDR2 frequencies. + * These values are in 1/256 ns units. + * @{ + */ +#define TCK_800MHZ 320 +#define TCK_700MHZ 365 +#define TCK_666MHZ 384 +#define TCK_533MHZ 480 +#define TCK_400MHZ 640 +#define TCK_333MHZ 768 +#define TCK_266MHZ 960 +#define TCK_200MHZ 1280 +/** @} */ + +/** + * \brief Convenience macro for enabling printk with CONFIG_DEBUG_RAM_SETUP + * + * Use this macro instead of printk(); for verbose RAM initialization messages. + * When CONFIG_DEBUG_RAM_SETUP is not selected, these messages are automatically + * disabled. + * @{ + */ +#if IS_ENABLED(CONFIG_DEBUG_RAM_SETUP) +#define printram(x, ...) printk(BIOS_DEBUG, x, ##__VA_ARGS__) +#else +#define printram(x, ...) +#endif +/** @} */ + +/* + * Module type (byte 20, bits 5:0) of SPD + * This definition is specific to DDR2. DDR3 SPDs have a different structure. + */ +enum spd_dimm_type { + SPD_DIMM_TYPE_UNDEFINED = 0x00, + SPD_DIMM_TYPE_RDIMM = 0x01, + SPD_DIMM_TYPE_UDIMM = 0x02, + SPD_DIMM_TYPE_SO_DIMM = 0x04, + SPD_DIMM_TYPE_72B_SO_CDIMM = 0x06, + SPD_DIMM_TYPE_72B_SO_RDIMM = 0x07, + SPD_DIMM_TYPE_MICRO_DIMM = 0x08, + SPD_DIMM_TYPE_MINI_DIMM = 0x10, + SPD_DIMM_TYPE_MINI_UDIMM = 0x20, + /* Masks to bits 5:0 to give the dimm type */ + SPD_DIMM_TYPE_MASK = 0x3f, +}; + +/** + * \brief DIMM flags + * + * Characteristic flags for the DIMM, as presented by the SPD + */ +typedef union dimm_flags_st { + /* The whole point of the union/struct construct is to allow us to clear + * all the bits with one line: flags.raw = 0. + * We do not care how these bits are ordered */ + struct { + /* Module can work at 5.00V */ + unsigned operable_5_00V:1; + /* Module can work at 3.33V */ + unsigned operable_3_33V:1; + /* Module can work at 2.50V */ + unsigned operable_2_50V:1; + /* Module can work at 1.80V - All DIMMS must be 1.8V operable */ + unsigned operable_1_80V:1; + /* Module can work at 1.50V */ + unsigned operable_1_50V:1; + /* Module can work at 1.35V */ + unsigned operable_1_35V:1; + /* Module can work at 1.20V */ + unsigned operable_1_25V:1; + /* Has an 8-bit bus extension, meaning the DIMM supports ECC */ + unsigned is_ecc:1; + /* Supports weak driver */ + unsigned weak_driver:1; + /* Supports terminating at 50 Ohm */ + unsigned terminate_50ohms:1; + /* Partial Array Self Refresh */ + unsigned pasr:1; + /* Supports burst length 8 */ + unsigned bl8:1; + /* Supports burst length 4 */ + unsigned bl4:1; + }; + unsigned int raw; +} dimm_flags_t; + +/** + * \brief DIMM characteristics + * + * The characteristics of each DIMM, as presented by the SPD + */ +typedef struct dimm_attr_st { + enum spd_memory_type dram_type; + enum spd_dimm_type dimm_type; + u8 cas_supported; + + /* Cycle times for various CAS */ + u32 cycle_time[6]; + /* Maximum data access times for various CAS */ + u32 access_time[6]; + /* Flags extracted from SPD */ + dimm_flags_t flags; + /* Number of banks */ + u8 banks; + /* SDRAM width */ + u8 width; + /* Module width */ + u8 mod_width; + /* Number of ranks */ + u8 ranks; + /* Number or row address bits */ + u8 row_bits; + /* Number or column address bits */ + u8 col_bits; + /* Size of module in MiB */ + u32 size_mb; + /* Latencies are in units of 1/256 ns */ + u32 tCK; + u32 tWR; + u32 tRCD; + u32 tRRD; + u32 tRP; + u32 tRAS; + u32 tIS; + u32 tIH; + u32 tDS; + u32 tDH; + + u32 tRC; + u32 tRFC; + u32 tWTR; + u32 tRTP; + u32 tDQSQ; + u32 tQHS; + u32 tPLL; + + /* Latencies are in units of 1/256 us */ + u32 tRR; + + /* Manufacturer ID */ + u32 manufacturer_id; // + /* ASCII part number - NULL terminated */ + u8 part_number[17]; +} dimm_attr; + +/** Result of the SPD decoding process */ +enum spd_status { + SPD_STATUS_OK = 0, + SPD_STATUS_INVALID, + SPD_STATUS_CRC_ERROR, + SPD_STATUS_INVALID_FIELD, +}; + +typedef u8 spd_raw_data[128]; + +int dimm_is_registered(enum spd_dimm_type type); +u8 spd_ddr2_calc_checksum(u8 *spd, int len); +u32 spd_decode_spd_size_ddr2(u8 byte0); +u32 spd_decode_eeprom_size_ddr2(u8 byte1); +int spd_decode_ddr2(dimm_attr *dimm, spd_raw_data spd); +void dram_print_spd_ddr2(const dimm_attr *dimm); + + +#endif /* DEVICE_DRAM_DDR2L_H */

1 0

New patch to review for coreboot: device/dram/ddr2: Add common ddr2 spd decoder
by Patrick Rudolph Jan. 31, 2017

Jan. 31, 2017

Patrick Rudolph (siro(a)das-labor.org) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/18273 -gerrit commit 8b4cbdeeac88c5148bccb09e921900fe848855bd Author: Patrick Rudolph <siro(a)das-labor.org> Date: Tue Jan 31 19:20:45 2017 +0100 device/dram/ddr2: Add common ddr2 spd decoder Decode DDR2 SPD similar to DDR3 SPD decoder to ease readability, reduce code complexity and reduce size of maintainable code. Change-Id: I741f0e61ab23e3999ae9e31f57228ba034c2509e Signed-off-by: Patrick Rudolph <siro(a)das-labor.org> --- 3rdparty/blobs | 2 +- src/device/dram/Makefile.inc | 2 +- src/device/dram/ddr2.c | 563 +++++++++++++++++++++++++++++++++++++++++ src/include/device/dram/ddr2.h | 201 +++++++++++++++ 4 files changed, 766 insertions(+), 2 deletions(-) diff --git a/3rdparty/blobs b/3rdparty/blobs index 8090bdd..b0eeddd 160000 --- a/3rdparty/blobs +++ b/3rdparty/blobs @@ -1 +1 @@ -Subproject commit 8090bdd59853599e469b7503ea473ca12e8c681b +Subproject commit b0eeddd4f5c583818e66521f2552cd3448b357b2 diff --git a/src/device/dram/Makefile.inc b/src/device/dram/Makefile.inc index 05f440b..23cc687 100644 --- a/src/device/dram/Makefile.inc +++ b/src/device/dram/Makefile.inc @@ -1 +1 @@ -romstage-$(CONFIG_SPD_CACHE) += spd_cache.c ddr3.c +romstage-$(CONFIG_SPD_CACHE) += spd_cache.c ddr3.c ddr2.c diff --git a/src/device/dram/ddr2.c b/src/device/dram/ddr2.c new file mode 100644 index 0000000..e8791c7 --- /dev/null +++ b/src/device/dram/ddr2.c @@ -0,0 +1,563 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Patrick Rudolph <siro(a)das-labor.org> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/** + * @file ddr2.c + * + * \brief Utilities for decoding DDR2 SPDs + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/dram/ddr2.h> +#include <string.h> + +/*============================================================================== + * = DDR2 SPD decoding helpers + *----------------------------------------------------------------------------*/ + +/** + * \brief Checks if the DIMM is Registered based on byte[20] of the SPD + * + * Tells if the DIMM type is registered or not. + * + * @param type DIMM type. This is byte[20] of the SPD. + */ +int dimm_is_registered(enum spd_dimm_type type) +{ + if ((type == SPD_DIMM_TYPE_RDIMM) + | (type == SPD_DIMM_TYPE_72B_SO_RDIMM)) + return 1; + + return 0; +} + +/** + * \brief Calculate the checksum of a DDR2 SPD unique identifier + * + * @param spd pointer to raw SPD data + * @param len length of data in SPD + * + * @return the checksum of SPD data bytes 63, or 0 when spd data is truncated. + */ +u8 spd_ddr2_calc_checksum(u8 *spd, int len) +{ + int i; + u8 c = 0; + + if (len < 63) + /* Not enough bytes available to get the checksum */ + return 0; + + for (i = 0; i < 63; i++) + c += spd[i]; + + return c; +} + +/** + * \brief Return size of SPD. + * + * Returns size of SPD. Usually 128 Byte. + */ +u32 spd_decode_spd_size_ddr2(u8 byte0) +{ + return byte0; +} + +/** + * \brief Return size of eeprom. + * + * Returns size of eeprom. Usually 256 Byte. + */ +u32 spd_decode_eeprom_size_ddr2(u8 byte1) +{ + if (!byte1) + return 0; + + if (byte1 > 0x0e) + return 0x3fff; + + return 1 << byte1; +} + +/** + * \brief Return index of MSB set + * + * Returns the index fof MSB set. + */ +static u8 spd_get_msbs(u8 c) +{ + int i; + for (i = 7; i >= 0; i--) + if (c & (1 << i)) + return i; + + return 0; +} + +/** + * \brief Decode SPD tck cycle time + * + * Decodes a raw SPD data from a DDR2 DIMM. + * Returns cycle time in 1/256th ns. + */ +static u32 spd_decode_tck_time(u8 c) +{ + u8 high, low; + + high = c >> 4; + + low = c & 0xf; + if (low == 0x0A) + low = 25; + else if (low == 0x0B) + low = 33; + else if (low == 0x0C) + low = 66; + else if (low == 0x0D) + low = 75; + + return (high << 8) + ((low << 8) / 10); +} + +/** + * \brief Decode SPD bcd style timings + * + * Decodes a raw SPD data from a DDR2 DIMM. + * Returns cycle time in 1/256th ns. + */ +static u32 spd_decode_bcd_time(u8 c) +{ + u8 high, low; + + high = c >> 4; + low = c & 0xf; + + return (high << 8) + ((low << 8) / 10); +} + +/** + * \brief Decode SPD tRP, tRRP cycle time + * + * Decodes a raw SPD data from a DDR2 DIMM. + * Returns cycle time in 1/256th ns. + */ +static u32 spd_decode_quarter_time(u8 c) +{ + u8 high, low; + + high = c >> 6; + + low = c & 0x3; + + if (low == 1) + low = 25; + else if (low == 2) + low = 50; + else if (low == 3) + low = 75; + + return (high << 8) + ((low << 8) / 10); +} + +/** + * \brief Decode SPD tRR time + * + * Decodes a raw SPD data from a DDR2 DIMM. + * Returns cycle time in 1/256th us. + */ +static u32 spd_decode_tRR_time(u8 c) +{ + switch (c) { + default: + case 0: + return 15625 << 8; + case 1: + return 15625 << 6; + case 2: + return 15625 << 7; + case 3: + return 15625 << 9; + case 4: + return 15625 << 10; + case 5: + return 15625 << 11; + } +} + +/** + * \brief Decode SPD tRP,tRFC time + * + * Decodes a raw SPD data from a DDR2 DIMM. + * Returns cycle time in 1/256th us. + */ +static void spd_decode_tRPtRFC_time(u8 *spd_40_41_42, u32 *tRC, u32 tRFC) +{ + u8 b40, b41, b42; + + b40 = spd_40_41_42[0]; + b41 = spd_40_41_42[1]; + b42 = spd_40_41_42[2]; + + *tRC = b41 << 8; + *tRFC = b42 << 8; + + if (b40 & 0x01) + *tRFC += 256 << 8; + + switch ((b40 >> 1) & 0x07) { + case 1: + *tRFC += (25 << 8) / 100; + break; + case 2: + *tRFC += (33 << 8) / 100; + break; + case 3: + *tRFC += (50 << 8) / 100; + break; + case 4: + *tRFC += (66 << 8) / 100; + break; + case 5: + *tRFC += (75 << 8) / 100; + break; + default: + break; + } + + switch ((b40 >> 4) & 0x07) { + case 1: + *tRC += (25 << 8) / 100; + break; + case 2: + *tRC += (33 << 8) / 100; + break; + case 3: + *tRC += (50 << 8) / 100; + break; + case 4: + *tRC += (66 << 8) / 100; + break; + case 5: + *tRC += (75 << 8) / 100; + break; + default: + break; + } +} + +/** + * \brief Decode the raw SPD data + * + * Decodes a raw SPD data from a DDR2 DIMM, and organizes it into a + * @ref dimm_attr structure. The SPD data must first be read in a contiguous + * array, and passed to this function. + * + * @param dimm pointer to @ref dimm_attr structure where the decoded data is to + * be stored + * @param spd array of raw data previously read from the SPD. + * + * @return @ref spd_status enumerator + * SPD_STATUS_OK -- decoding was successful + * SPD_STATUS_INVALID -- invalid SPD or not a DDR2 SPD + * SPD_STATUS_CRC_ERROR -- CRC did not verify + * SPD_STATUS_INVALID_FIELD -- A field with an invalid value was + * detected. + */ +int spd_decode_ddr2(dimm_attr *dimm, spd_raw_data spd) +{ + int ret; + u16 eeprom_size; + u8 spd_size; + u8 cl; + u8 reg8; + + spd_size = spd_decode_spd_size_ddr2(spd[0]); + eeprom_size = spd_decode_eeprom_size_ddr2(spd[1]); + + printram("EEPROM with 0x%04x bytes\n", eeprom_size); + printram("SPD contains 0x%02x bytes\n", spd_size); + + if (spd_size < 64 || eeprom_size < 64) { + printram("ERROR: SPD to small\n"); + dimm->dram_type = SPD_MEMORY_TYPE_UNDEFINED; + return SPD_STATUS_INVALID; + } + + if (spd_ddr2_calc_checksum(spd, spd_size) != spd[63]) { + printram("ERROR: SPD checksum error\n"); + dimm->dram_type = SPD_MEMORY_TYPE_UNDEFINED; + return SPD_STATUS_INVALID; + } + + reg8 = spd[62]; + if ((reg8 & 0xf0) != 0x10) { + printram("ERROR: Unsupported SPD revision %01x.%01x\n", + revision >> 4, revision & 0xf); + dimm->dram_type = SPD_MEMORY_TYPE_UNDEFINED; + return SPD_STATUS_INVALID; + } + printram(" Revision : %x\n", reg8); + + reg8 = spd[2]; + if (reg8 != 0x08) { + printram("ERROR: Unsupported SPD type %x\n", reg8); + dimm->dram_type = SPD_MEMORY_TYPE_UNDEFINED; + return SPD_STATUS_INVALID; + } + printram(" Type : %x\n", reg8); + dimm->dram_type = SPD_MEMORY_TYPE_SDRAM_DDR2; + + dimm->row_bits = spd[3]; + if (dimm->row_bits > 31) { + printram(" Invalid number of memory rows\n"); + ret = SPD_STATUS_INVALID_FIELD; + } + printram(" Rows : %x\n", dimm->row_bits); + + dimm->col_bits = spd[4]; + if (dimm->col_bits > 16) { + printram(" Invalid number of memory columns\n"); + ret = SPD_STATUS_INVALID_FIELD; + } + printram(" Columns : %x\n", dimm->col_bits); + + dimm->ranks = spd[5] & 0x7; + printram(" Ranks : %x\n", dimm->ranks); + + dimm->mod_width = spd[6]; + printram(" Module width : x%u\n", dimm->mod_width); + + dimm->width = spd[13]; + printram(" Width : x%u\n", dimm->width); + + dimm->banks = spd[17]; + printram(" Banks : %x\n", dimm->banks); + + switch (spd[8]) { + case 0: + dimm->flags.operable_5_00V = 1; + printram(" Voltage : 5.0V\n"); + break; + case 1: + dimm->flags.operable_3_33V = 1; + printram(" Voltage : 3.3V\n"); + break; + case 2: + dimm->flags.operable_1_50V = 1; + printram(" Voltage : 1.5V\n"); + break; + case 3: + dimm->flags.operable_3_33V = 1; + printram(" Voltage : 3.3V\n"); + break; + case 4: + dimm->flags.operable_2_50V = 1 + printram(" Voltage : 2.5V\n"); + break; + case 5: + dimm->flags.operable_1_80V = 1; + printram(" Voltage : 1.8V\n"); + break; + default: + printram(" Unknown voltage level.\n"); + ret = SPD_STATUS_INVALID_FIELD; + } + + dimm->cas_supported = spd[18]; + if (dimm->cas_supported & 0x3) { + printram(" Invalid CAS support advertised.\n"); + ret = SPD_STATUS_INVALID_FIELD; + } + printram(" Supported CAS : 0x%x\n", dimm->cas_supported); + + cl = spd_get_msbs(dimm->cas_supported); + + dimm->cycle_time[cl] = spd_decode_tck_time(spd[9]); + dimm->access_time[cl] = spd_decode_bcd_time(spd[10]); + + if (dimm->cas_supported & (1 << (cl - 1))) { + dimm->cycle_time[cl - 1] = spd_decode_tck_time(spd[23]); + dimm->access_time[cl - 1] = spd_decode_bcd_time(spd[24]); + } + if (dimm->cas_supported & (1 << (cl - 2))) { + dimm->cycle_time[cl - 2] = spd_decode_tck_time(spd[25]); + dimm->access_time[cl - 2] = spd_decode_bcd_time(spd[26]); + } + + reg8 = (spd[31] >> 5) | (spd[31] << 3); + dimm->size_mb = 64 << reg8; + + if (reg8 < 0x08) + printram(" Capacity : %u Mb\n", 64 << reg8); + else + printram(" Capacity : %u Gb\n", 1 << (reg8 - 8)); + + + /* SDRAM Minimum Cycle Time (tCKmin) */ + dimm->tCK = spd_decode_tck_time(spd[43]); + /* Minimum Write Recovery Time (tWRmin) */ + dimm->tWR = spd_decode_quarter_time(spd[36]); + /* Minimum RAS# to CAS# Delay Time (tRCDmin) */ + dimm->tRCD = spd_decode_quarter_time(spd[29]); + /* Minimum Row Active to Row Active Delay Time (tRRDmin) */ + dimm->tRRD = spd_decode_quarter_time(spd[28]); + /* Minimum Row Precharge Delay Time (tRPmin) */ + dimm->tRP = spd_decode_quarter_time(spd[27]); + /* Minimum Active to Precharge Delay Time (tRASmin) */ + dimm->tRAS = spd[30] << 8; + /* Minimum Active to Active/Refresh Delay Time (tRCmin) */ + /* Minimum Refresh Recovery Delay Time (tRFCmin) */ + spd_decode_tRPtRFC_time(&spd[40], &dimm->tRC, &dimm->tRFC); + /* Minimum Internal Write to Read Command Delay Time (tWTRmin) */ + dimm->tWTR = spd_decode_quarter_time(spd[37]); + /* Minimum Internal Read to Precharge Command Delay Time (tRTPmin) */ + dimm->tRTP = spd_decode_quarter_time(spd[38]); + /* Data Input Setup Time Before Strobe */ + dimm->tDS = spd_decode_bcd_time(spd[34]); + /* Data Input Hold Time After Strobe */ + dimm->tDH = spd_decode_bcd_time(spd[35]); + /* SDRAM Device DQS-DQ Skew for DQS and associated DQ signals */ + dimm->tDQSQ = spd[44]; + /* SDRAM Device Read Data Hold Skew Factor */ + dimm->tQHS = spd[45]; + /* PLL Relock Time */ + dimm->tPLL = spd[46] << 8; + /* Refresh rate */ + dimm->tRR = spd_decode_tRR_time(spd[12]); + + /* SDRAM Thermal and Refresh Options */ + printram(" General features :"); + if (spd[22] & 0x04) { + dimm->flags.pasr = 1; + printram(" PASR"); + } + if (spd[22] & 0x02) { + dimm->flags.terminate_50ohms = 1; + printram(" 50Ohm"); + } + if (spd[22] & 0x01) { + dimm->flags.weak_driver = 1; + printram(" WEAK DRIVER"); + } + printram("\n"); + + /* SDRAM Supported Burst length */ + printram(" Burst length :"); + if (spd[16] & 0x06) { + dimm->flags.bl8 = 1; + printram(" BL8"); + } + if (spd[22] & 0x04) { + dimm->flags.bl4 = 1; + printram(" BL4"); + } + printram("\n"); + + dimm->dimm_type = spd[20] & SPD_DIMM_TYPE_MASK; + printram(" Dimm type : %x\n", dimm->dimm_type); + + dimm->flags.is_ecc = !!(spd[11] & 0x3); + printram(" ECC support : %x\n", dimm->flags.is_ecc); + + if (spd_size > 71) { + memcpy(&dimm->manufacturer_id, &spd[64], 4); + printram(" Manufacturer ID : %x\n", dimm->manufacturer_id); + } + + if (spd_size > 90) { + dimm->part_number[16] = 0; + memcpy(dimm->part_number, &spd[73], 16); + printram(" Part number : %s\n", dimm->part_number); + } + + return ret; +} + +/* + * The information printed below has a more informational character, and is not + * necessarily tied in to RAM init debugging. Hence, we stop using printram(), + * and use the standard printk()'s below. + */ + +static void print_ns(const char *msg, u32 val) +{ + u32 mant, fp; + mant = val / 256; + fp = (val % 256) * 1000 / 256; + + printk(BIOS_INFO, "%s%3u.%.3u ns\n", msg, mant, fp); +} + +static void print_us(const char *msg, u32 val) +{ + u32 mant, fp; + mant = val / 256; + fp = (val % 256) * 1000 / 256; + + printk(BIOS_INFO, "%s%3u.%.3u us\n", msg, mant, fp); +} + +/** +* \brief Print the info in DIMM +* +* Print info about the DIMM. Useful to use when CONFIG_DEBUG_RAM_SETUP is +* selected, or for a purely informative output. +* +* @param dimm pointer to already decoded @ref dimm_attr structure +*/ +void dram_print_spd_ddr2(const dimm_attr *dimm) +{ + u8 val8; + int i; + + printk(BIOS_INFO, " Row addr bits : %u\n", dimm->row_bits); + printk(BIOS_INFO, " Column addr bits : %u\n", dimm->col_bits); + printk(BIOS_INFO, " Number of ranks : %u\n", dimm->ranks); + printk(BIOS_INFO, " DIMM Capacity : %u MB\n", dimm->size_mb); + printk(BIOS_INFO, " Width : x%u\n", dimm->width); + printk(BIOS_INFO, " Banks : %u\n", dimm->banks); + + /* CAS Latencies Supported */ + val8 = dimm->cas_supported; + printk(BIOS_INFO, " CAS latencies :"); + i = 2; + do { + if (val8 & 1) + printk(BIOS_INFO, " %u", i); + i++; + val8 >>= 1; + } while (val8); + printk(BIOS_INFO, "\n"); + + print_ns(" tCKmin : ", dimm->tCK); + print_ns(" tWRmin : ", dimm->tWR); + print_ns(" tRCDmin : ", dimm->tRCD); + print_ns(" tRRDmin : ", dimm->tRRD); + print_ns(" tRPmin : ", dimm->tRP); + print_ns(" tRASmin : ", dimm->tRAS); + print_ns(" tRCmin : ", dimm->tRC); + print_ns(" tRFCmin : ", dimm->tRFC); + print_ns(" tWTRmin : ", dimm->tWTR); + print_ns(" tRTPmin : ", dimm->tRTP); + print_ns(" tDS : ", dimm->tDS); + print_ns(" tDH : ", dimm->tDH); + print_ns(" tDQSQ : ", dimm->tDQSQ); + print_ns(" tQHS : ", dimm->tQHS); + print_ns(" tPLL : ", dimm->tPLL); + print_us(" tRR : ", dimm->tRR); +} diff --git a/src/include/device/dram/ddr2.h b/src/include/device/dram/ddr2.h new file mode 100644 index 0000000..909e11c --- /dev/null +++ b/src/include/device/dram/ddr2.h @@ -0,0 +1,201 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Patrick Rudolph <siro(a)das-labor.org> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * JEDEC Standard No. 21-C + * Annex J: Annex J: Serial Presence Detects for DDR2 SDRAM (Revision 1.3) + */ + +#ifndef DEVICE_DRAM_DDR2L_H +#define DEVICE_DRAM_DDR2L_H + +/** + * @file ddr2.h + * + * \brief Utilities for decoding DDR2 SPDs + */ + +#include <stdint.h> +#include <spd.h> + +/** + * \brief Convenience definitions for TCK values + * + * Different values for tCK, representing standard DDR2 frequencies. + * These values are in 1/256 ns units. + * @{ + */ +#define TCK_800MHZ 320 +#define TCK_700MHZ 365 +#define TCK_666MHZ 384 +#define TCK_533MHZ 480 +#define TCK_400MHZ 640 +#define TCK_333MHZ 768 +#define TCK_266MHZ 960 +#define TCK_200MHZ 1280 +/** @} */ + +/** + * \brief Convenience macro for enabling printk with CONFIG_DEBUG_RAM_SETUP + * + * Use this macro instead of printk(); for verbose RAM initialization messages. + * When CONFIG_DEBUG_RAM_SETUP is not selected, these messages are automatically + * disabled. + * @{ + */ +#if IS_ENABLED(CONFIG_DEBUG_RAM_SETUP) +#define printram(x, ...) printk(BIOS_DEBUG, x, ##__VA_ARGS__) +#else +#define printram(x, ...) +#endif +/** @} */ + +/* + * Module type (byte 20, bits 5:0) of SPD + * This definition is specific to DDR2. DDR3 SPDs have a different structure. + */ +enum spd_dimm_type { + SPD_DIMM_TYPE_UNDEFINED = 0x00, + SPD_DIMM_TYPE_RDIMM = 0x01, + SPD_DIMM_TYPE_UDIMM = 0x02, + SPD_DIMM_TYPE_SO_DIMM = 0x04, + SPD_DIMM_TYPE_72B_SO_CDIMM = 0x06, + SPD_DIMM_TYPE_72B_SO_RDIMM = 0x07, + SPD_DIMM_TYPE_MICRO_DIMM = 0x08, + SPD_DIMM_TYPE_MINI_DIMM = 0x10, + SPD_DIMM_TYPE_MINI_UDIMM = 0x20, + /* Masks to bits 5:0 to give the dimm type */ + SPD_DIMM_TYPE_MASK = 0x3f, +}; + +/** + * \brief DIMM flags + * + * Characteristic flags for the DIMM, as presented by the SPD + */ +typedef union dimm_flags_st { + /* The whole point of the union/struct construct is to allow us to clear + * all the bits with one line: flags.raw = 0. + * We do not care how these bits are ordered */ + struct { + /* Module can work at 5.00V */ + unsigned operable_5_00V:1; + /* Module can work at 3.33V */ + unsigned operable_3_33V:1; + /* Module can work at 2.50V */ + unsigned operable_2_50V:1; + /* Module can work at 1.80V - All DIMMS must be 1.8V operable */ + unsigned operable_1_80V:1; + /* Module can work at 1.50V */ + unsigned operable_1_50V:1; + /* Module can work at 1.35V */ + unsigned operable_1_35V:1; + /* Module can work at 1.20V */ + unsigned operable_1_25V:1; + /* Has an 8-bit bus extension, meaning the DIMM supports ECC */ + unsigned is_ecc:1; + /* Supports weak driver */ + unsigned weak_driver:1; + /* Supports terminating at 50 Ohm */ + unsigned terminate_50ohms:1; + /* Partial Array Self Refresh */ + unsigned pasr:1; + /* Supports burst length 8 */ + unsigned bl8:1; + /* Supports burst length 4 */ + unsigned bl4:1; + }; + unsigned int raw; +} dimm_flags_t; + +/** + * \brief DIMM characteristics + * + * The characteristics of each DIMM, as presented by the SPD + */ +typedef struct dimm_attr_st { + enum spd_memory_type dram_type; + enum spd_dimm_type dimm_type; + u8 cas_supported; + + /* Cycle times for various CAS */ + u32 cycle_time[6]; + /* Maximum data access times for various CAS */ + u32 access_time[6]; + /* Flags extracted from SPD */ + dimm_flags_t flags; + /* Number of banks */ + u8 banks; + /* SDRAM width */ + u8 width; + /* Module width */ + u8 mod_width; + /* Number of ranks */ + u8 ranks; + /* Number or row address bits */ + u8 row_bits; + /* Number or column address bits */ + u8 col_bits; + /* Size of module in MiB */ + u32 size_mb; + /* Latencies are in units of 1/256 ns */ + u32 tCK; + u32 tWR; + u32 tRCD; + u32 tRRD; + u32 tRP; + u32 tRAS; + u32 tIS; + u32 tIH; + u32 tDS; + u32 tDH; + + u32 tRC; + u32 tRFC; + u32 tWTR; + u32 tRTP; + u32 tDQSQ; + u32 tQHS; + u32 tPLL; + + /* Latencies are in units of 1/256 us */ + u32 tRR; + + /* Manufacturer ID */ + u32 manufacturer_id; // + /* ASCII part number - NULL terminated */ + u8 part_number[17]; +} dimm_attr; + +/** Result of the SPD decoding process */ +enum spd_status { + SPD_STATUS_OK = 0, + SPD_STATUS_INVALID, + SPD_STATUS_CRC_ERROR, + SPD_STATUS_INVALID_FIELD, +}; + +typedef u8 spd_raw_data[128]; + +int dimm_is_registered(enum spd_dimm_type type); +u8 spd_ddr2_calc_checksum(u8 *spd, int len); +u32 spd_decode_spd_size_ddr2(u8 byte0); +u32 spd_decode_eeprom_size_ddr2(u8 byte1); +int spd_decode_ddr2(dimm_attr *dimm, spd_raw_data spd); +void dram_print_spd_ddr2(const dimm_attr *dimm); + + +#endif /* DEVICE_DRAM_DDR3L_H */

1 0

Patch merged into coreboot/master: google/veyron*: mark GPIO array non-static
by gerrit＠coreboot.org Jan. 31, 2017

Jan. 31, 2017

the following patch was just integrated into master: commit c09e148b381129748b8bd2df083722a027fa31f7 Author: Patrick Georgi <pgeorgi(a)google.com> Date: Mon Jan 30 17:53:34 2017 +0100 google/veyron*: mark GPIO array non-static That status isn't needed and making it non-static helps gcc 4.9.2 (or any compiler that insists on "standard C" behaviour with global const initializers) Change-Id: Ib1fbd5213d262e653f31564b106095b4a28292f6 Signed-off-by: Patrick Georgi <pgeorgi(a)google.com> Reviewed-on: https://review.coreboot.org/18266 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin(a)chromium.org> See https://review.coreboot.org/18266 for details. -gerrit

1 0

Patch merged into coreboot/master: build system: mark sub-make invocations as parallelizable
by gerrit＠coreboot.org Jan. 31, 2017

Jan. 31, 2017

the following patch was just integrated into master: commit 78a5f22994da63bb02882aacb68cbbb70c2606ac Author: Patrick Georgi <pgeorgi(a)google.com> Date: Mon Jan 30 15:29:34 2017 +0100 build system: mark sub-make invocations as parallelizable We rely on gnu make, so we can expect the jobserver to be around in parallel builds, too. Avoids some make warnings and slightly speeds up the build if those sub-makes are executed (eg for arm-trusted-firmware and vboot). Change-Id: I0e6a77f2813f7453d53e88e0214ad8c1b8689042 Signed-off-by: Patrick Georgi <pgeorgi(a)google.com> Reviewed-on: https://review.coreboot.org/18263 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter(a)users.sourceforge.net> Reviewed-by: Martin Roth <martinroth(a)google.com> See https://review.coreboot.org/18263 for details. -gerrit

1 0

Patch merged into coreboot/master: util/xcompile: parallelize compiler checks
by gerrit＠coreboot.org Jan. 31, 2017

Jan. 31, 2017

the following patch was just integrated into master: commit be182ad380bbb335fb5d1d746f0f8ce4a113b2f2 Author: Patrick Georgi <pgeorgi(a)google.com> Date: Mon Jan 30 15:27:35 2017 +0100 util/xcompile: parallelize compiler checks Speed up the execution of this script from ~6 seconds to ~1 on my system. There are some changes to its output, but they're actually _more_ correct: so far, architectures without compiler support kept compiler options for architectures that ran successfully earlier. Change-Id: I0532ea2178fbedb114a75cfd5ba39301e534e742 Signed-off-by: Patrick Georgi <pgeorgi(a)google.com> Reviewed-on: https://review.coreboot.org/18262 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth(a)google.com> See https://review.coreboot.org/18262 for details. -gerrit

1 0

Patch set updated for coreboot: mb/lenovo/x60, t60: Move EC CMOS parameters in checksummed space
by Arthur Heymans Jan. 31, 2017

Jan. 31, 2017

Arthur Heymans (arthur(a)aheymans.xyz) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/17041 -gerrit commit 1d44e690119b4823d3db717d8d7634179d2c9e1d Author: Arthur Heymans <arthur(a)aheymans.xyz> Date: Sun Oct 16 23:09:16 2016 +0200 mb/lenovo/x60,t60: Move EC CMOS parameters in checksummed space This allows for defaults to be applied to CMOS parameters when cmos checksum is incorrect. This probably resutlts in changed cmos settings for current users of these targets. Change-Id: Ifec0093f4b0dbaa51b96812a041f0eaf5c58ee86 Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- src/mainboard/lenovo/t60/cmos.layout | 26 ++++++++++++++------------ src/mainboard/lenovo/x60/cmos.layout | 27 ++++++++++++++------------- 2 files changed, 28 insertions(+), 25 deletions(-) diff --git a/src/mainboard/lenovo/t60/cmos.layout b/src/mainboard/lenovo/t60/cmos.layout index 2cd4e7b..af788c6 100644 --- a/src/mainboard/lenovo/t60/cmos.layout +++ b/src/mainboard/lenovo/t60/cmos.layout @@ -70,7 +70,20 @@ entries # coreboot config options: cpu 944 1 e 2 hyper_threading -#945 7 r 0 unused +#945 3 r 0 unused + +# coreboot config options: ec +948 1 e 1 touchpad +949 1 e 1 bluetooth +950 1 e 1 wwan +951 1 e 1 wlan +952 8 h 0 volume +960 1 e 9 first_battery +961 1 e 1 trackpoint +962 1 e 1 fn_ctrl_swap +963 1 e 1 sticky_fn +964 1 e 1 power_management_beeps +965 1 e 1 low_battery_beep # coreboot config options: check sums 984 16 h 0 check_sum @@ -83,17 +96,6 @@ entries 1048 4 r 0 C0DRT1 1052 4 r 0 C1DRT1 -1060 1 e 1 touchpad -1061 1 e 1 bluetooth -1062 1 e 1 wwan -1063 1 e 1 wlan -1064 8 h 0 volume -1072 1 e 9 first_battery -1073 1 e 1 trackpoint -1074 1 e 1 fn_ctrl_swap -1075 1 e 1 sticky_fn -1076 1 e 1 power_management_beeps -1077 1 e 1 low_battery_beep # ----------------------------------------------------------------- enumerations diff --git a/src/mainboard/lenovo/x60/cmos.layout b/src/mainboard/lenovo/x60/cmos.layout index 3e316c9..ebc6678 100644 --- a/src/mainboard/lenovo/x60/cmos.layout +++ b/src/mainboard/lenovo/x60/cmos.layout @@ -70,7 +70,20 @@ entries # coreboot config options: cpu 944 1 e 2 hyper_threading -#945 7 r 0 unused +#945 4 r 0 unused + +# coreboot config options: ec +949 1 e 9 first_battery +950 1 e 1 bluetooth +951 1 e 1 wwan +952 1 e 1 wlan +953 1 e 1 trackpoint +954 1 e 1 fn_ctrl_swap +955 1 e 1 sticky_fn +956 1 e 1 power_management_beeps +959 1 e 1 low_battery_beep +960 8 h 0 volume +968 8 h 0 tft_brightness # coreboot config options: check sums 984 16 h 0 check_sum @@ -82,18 +95,6 @@ entries 1040 8 r 0 RCVENMT 1048 4 r 0 C0DRT1 1052 4 r 0 C1DRT1 - -1064 8 h 0 volume -1072 8 h 0 tft_brightness -1080 1 e 9 first_battery -1081 1 e 1 bluetooth -1082 1 e 1 wwan -1083 1 e 1 wlan -1084 1 e 1 trackpoint -1085 1 e 1 fn_ctrl_swap -1086 1 e 1 sticky_fn -1087 1 e 1 power_management_beeps -1088 1 e 1 low_battery_beep # ----------------------------------------------------------------- enumerations

1 0

Patch merged into coreboot/master: asus/m2v, m2v-mx_se: Unify Kconfig
by gerrit＠coreboot.org Jan. 31, 2017

Jan. 31, 2017

the following patch was just integrated into master: commit 7328cf948ec0c56750e433dc6db73b118a480836 Author: Paul Menzel <paulepanter(a)users.sourceforge.net> Date: Mon Nov 7 22:23:34 2016 +0100 asus/m2v,m2v-mx_se: Unify Kconfig Reorder the items to minimize the differences. Change-Id: I745ec70a990f997d87c2a0b6164ae127eb694ddf Signed-off-by: Paul Menzel <paulepanter(a)users.sourceforge.net> Reviewed-on: https://review.coreboot.org/17438 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Reviewed-by: Tobias Diedrich <ranma+coreboot(a)tdiedrich.de> Reviewed-by: Patrick Georgi <pgeorgi(a)google.com> See https://review.coreboot.org/17438 for details. -gerrit

1 0

Jump to page: