May 2015 - coreboot-gerrit - mail.coreboot.org

Patch set updated for coreboot: f9db32d AMD K8: Move SB_HT_CHAIN_ON_BUS0 default 0
by Kyösti Mälkki June 1, 2015

June 1, 2015

Kyösti Mälkki (kyosti.malkki(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8353 -gerrit commit f9db32d4b8364916009e1fff8a433ba46832f034 Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Thu Feb 5 14:05:51 2015 +0200 AMD K8: Move SB_HT_CHAIN_ON_BUS0 default 0 Define the default value under northbridge. The list of boards this patchset touches will change to use SB_HT_CHAIN_ON_BUS0 with follow-up patch. Based on code analysis, these boards already scan system bus as the first (active) HT chain, so it is placed as bus 0 even when this option was not explicitly selected. Change-Id: I5a00d6372cb89151940aeee517ea613398825c78 Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- src/mainboard/ibm/e325/Kconfig | 4 ---- src/mainboard/ibm/e326/Kconfig | 4 ---- src/mainboard/iwill/dk8s2/Kconfig | 4 ---- src/mainboard/iwill/dk8x/Kconfig | 4 ---- src/mainboard/newisys/khepri/Kconfig | 4 ---- src/mainboard/tyan/s2850/Kconfig | 4 ---- src/mainboard/tyan/s2875/Kconfig | 4 ---- src/mainboard/tyan/s2880/Kconfig | 4 ---- src/mainboard/tyan/s2882/Kconfig | 4 ---- src/mainboard/tyan/s4880/Kconfig | 4 ---- src/mainboard/tyan/s4882/Kconfig | 4 ---- src/northbridge/amd/amdk8/Kconfig | 4 ++++ 12 files changed, 4 insertions(+), 44 deletions(-) diff --git a/src/mainboard/ibm/e325/Kconfig b/src/mainboard/ibm/e325/Kconfig index 10b6fde..0400677 100644 --- a/src/mainboard/ibm/e325/Kconfig +++ b/src/mainboard/ibm/e325/Kconfig @@ -43,10 +43,6 @@ config MAX_PHYSICAL_CPUS int default 1 -config SB_HT_CHAIN_ON_BUS0 - int - default 0 - config HT_CHAIN_END_UNITID_BASE hex default 0x20 diff --git a/src/mainboard/ibm/e326/Kconfig b/src/mainboard/ibm/e326/Kconfig index 005012a..bd2bb26 100644 --- a/src/mainboard/ibm/e326/Kconfig +++ b/src/mainboard/ibm/e326/Kconfig @@ -43,10 +43,6 @@ config MAX_PHYSICAL_CPUS int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 0 - config HT_CHAIN_END_UNITID_BASE hex default 0x20 diff --git a/src/mainboard/iwill/dk8s2/Kconfig b/src/mainboard/iwill/dk8s2/Kconfig index c4de3a1..6b54645 100644 --- a/src/mainboard/iwill/dk8s2/Kconfig +++ b/src/mainboard/iwill/dk8s2/Kconfig @@ -37,10 +37,6 @@ config MAX_PHYSICAL_CPUS int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 0 - config HT_CHAIN_END_UNITID_BASE hex default 0x20 diff --git a/src/mainboard/iwill/dk8x/Kconfig b/src/mainboard/iwill/dk8x/Kconfig index af35bb6..f2660c6 100644 --- a/src/mainboard/iwill/dk8x/Kconfig +++ b/src/mainboard/iwill/dk8x/Kconfig @@ -36,10 +36,6 @@ config MAX_PHYSICAL_CPUS int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 0 - config HT_CHAIN_END_UNITID_BASE hex default 0x20 diff --git a/src/mainboard/newisys/khepri/Kconfig b/src/mainboard/newisys/khepri/Kconfig index 7f618af..f1c2687 100644 --- a/src/mainboard/newisys/khepri/Kconfig +++ b/src/mainboard/newisys/khepri/Kconfig @@ -30,10 +30,6 @@ config APIC_ID_OFFSET hex default 0x0 -config SB_HT_CHAIN_ON_BUS0 - int - default 0 - config MAINBOARD_PART_NUMBER string default "Khepri" diff --git a/src/mainboard/tyan/s2850/Kconfig b/src/mainboard/tyan/s2850/Kconfig index e6e3df2..2866b0c 100644 --- a/src/mainboard/tyan/s2850/Kconfig +++ b/src/mainboard/tyan/s2850/Kconfig @@ -40,10 +40,6 @@ config HT_CHAIN_END_UNITID_BASE hex default 0x20 -config SB_HT_CHAIN_ON_BUS0 - int - default 0 - config APIC_ID_OFFSET hex default 0x0 diff --git a/src/mainboard/tyan/s2875/Kconfig b/src/mainboard/tyan/s2875/Kconfig index 30aa01e..85c3ab4 100644 --- a/src/mainboard/tyan/s2875/Kconfig +++ b/src/mainboard/tyan/s2875/Kconfig @@ -42,10 +42,6 @@ config HT_CHAIN_END_UNITID_BASE hex default 0x20 -config SB_HT_CHAIN_ON_BUS0 - int - default 0 - config APIC_ID_OFFSET hex default 0x0 diff --git a/src/mainboard/tyan/s2880/Kconfig b/src/mainboard/tyan/s2880/Kconfig index 5186337..62b4e70 100644 --- a/src/mainboard/tyan/s2880/Kconfig +++ b/src/mainboard/tyan/s2880/Kconfig @@ -22,10 +22,6 @@ config APIC_ID_OFFSET hex default 0x0 -config SB_HT_CHAIN_ON_BUS0 - int - default 0 - config MAINBOARD_PART_NUMBER string default "S2880" diff --git a/src/mainboard/tyan/s2882/Kconfig b/src/mainboard/tyan/s2882/Kconfig index 646b5a8..bf980d7 100644 --- a/src/mainboard/tyan/s2882/Kconfig +++ b/src/mainboard/tyan/s2882/Kconfig @@ -23,10 +23,6 @@ config APIC_ID_OFFSET hex default 0x0 -config SB_HT_CHAIN_ON_BUS0 - int - default 0 - config MAINBOARD_PART_NUMBER string default "S2882" diff --git a/src/mainboard/tyan/s4880/Kconfig b/src/mainboard/tyan/s4880/Kconfig index d4feacb..6c85c6c 100644 --- a/src/mainboard/tyan/s4880/Kconfig +++ b/src/mainboard/tyan/s4880/Kconfig @@ -30,10 +30,6 @@ config APIC_ID_OFFSET hex default 0x10 -config SB_HT_CHAIN_ON_BUS0 - int - default 0 - config MAINBOARD_PART_NUMBER string default "S4880" diff --git a/src/mainboard/tyan/s4882/Kconfig b/src/mainboard/tyan/s4882/Kconfig index 2bd3854..7723acf 100644 --- a/src/mainboard/tyan/s4882/Kconfig +++ b/src/mainboard/tyan/s4882/Kconfig @@ -30,10 +30,6 @@ config APIC_ID_OFFSET hex default 0x10 -config SB_HT_CHAIN_ON_BUS0 - int - default 0 - config MAINBOARD_PART_NUMBER string default "S4882" diff --git a/src/northbridge/amd/amdk8/Kconfig b/src/northbridge/amd/amdk8/Kconfig index e5161ab..cc0cc66 100644 --- a/src/northbridge/amd/amdk8/Kconfig +++ b/src/northbridge/amd/amdk8/Kconfig @@ -64,6 +64,10 @@ config SB_HT_CHAIN_UNITID_OFFSET_ONLY bool default n +config SB_HT_CHAIN_ON_BUS0 + int + default 0 + config QRANK_DIMM_SUPPORT bool default n

1 0

Patch set updated for coreboot: 05a9e07 AMD K8 fam10: Relocate SB_HT_CHAIN in devicetree
by Kyösti Mälkki June 1, 2015

June 1, 2015

Kyösti Mälkki (kyosti.malkki(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8560 -gerrit commit 05a9e07c7e481666996b46b65769f377a583447c Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Sat Feb 21 14:31:01 2015 +0200 AMD K8 fam10: Relocate SB_HT_CHAIN in devicetree When we want to scan the HT chain to southbridge first, we relocate it as the first item of dev->link_list of node 0. Change-Id: Ic73ba43aadb3c5e0c8d4b82ed7d41094692ea37f Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- src/northbridge/amd/amdfam10/northbridge.c | 45 +++++++++++++++++++++++------ src/northbridge/amd/amdk8/northbridge.c | 46 +++++++++++++++++++++++------- 2 files changed, 72 insertions(+), 19 deletions(-) diff --git a/src/northbridge/amd/amdfam10/northbridge.c b/src/northbridge/amd/amdfam10/northbridge.c index 7fee62a..2334a13 100644 --- a/src/northbridge/amd/amdfam10/northbridge.c +++ b/src/northbridge/amd/amdfam10/northbridge.c @@ -271,6 +271,36 @@ static u32 amdfam10_scan_chain(device_t dev, u32 nodeid, struct bus *link, bool return link->subordinate; } +/* Do sb ht chain at first, in case s2885 put sb chain + * (8131/8111) on link2, but put 8151 on link0. + */ +static void relocate_sb_ht_chain(void) +{ + struct device *dev; + struct bus *link, *prev = NULL; + u8 sblink; + + if (!CONFIG_SB_HT_CHAIN_ON_BUS0) + return; + + dev = dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB, 0)); + sblink = (pci_read_config32(dev, 0x64)>>8) & 7; + link = dev->link_list; + + while (link) { + if (link->link_num == sblink) { + if (!prev) + return; + prev->next = link->next; + link->next = dev->link_list; + dev->link_list = link; + return; + } + prev = link; + link = link->next; + } +} + static void amdfam10_scan_chains(device_t dev) { unsigned nodeid; @@ -283,15 +313,6 @@ static void amdfam10_scan_chains(device_t dev) /* Do sb ht chain at first, in case s2885 put sb chain (8131/8111) on link2, but put 8151 on link0 */ for (link = dev->link_list; link; link = link->next) { bool is_sblink = (nodeid == 0) && (link->link_num == sblink); - if ((CONFIG_SB_HT_CHAIN_ON_BUS0 > 0) && is_sblink) - max = amdfam10_scan_chain(dev, nodeid, link, is_sblink, max); - } - - for (link = dev->link_list; link; link = link->next) { - bool is_sblink = (nodeid == 0) && (link->link_num == sblink); - if ((CONFIG_SB_HT_CHAIN_ON_BUS0 > 0) && is_sblink) - continue; - max = amdfam10_scan_chain(dev, nodeid, link, is_sblink, max); } @@ -582,9 +603,15 @@ static const struct pci_driver mcf0_driver __pci_driver = { .device = 0x1200, }; +static void amdfam10_nb_init(void *chip_info) +{ + relocate_sb_ht_chain(); +} + struct chip_operations northbridge_amd_amdfam10_ops = { CHIP_NAME("AMD FAM10 Northbridge") .enable_dev = 0, + .init = amdfam10_nb_init, }; static void amdfam10_domain_read_resources(device_t dev) diff --git a/src/northbridge/amd/amdk8/northbridge.c b/src/northbridge/amd/amdk8/northbridge.c index 7184c38..bdfe355 100644 --- a/src/northbridge/amd/amdk8/northbridge.c +++ b/src/northbridge/amd/amdk8/northbridge.c @@ -240,6 +240,36 @@ static u32 amdk8_scan_chain(device_t dev, u32 nodeid, struct bus *link, bool is_ return link->subordinate; } +/* Do sb ht chain at first, in case s2885 put sb chain + * (8131/8111) on link2, but put 8151 on link0. + */ +static void relocate_sb_ht_chain(void) +{ + struct device *dev; + struct bus *link, *prev = NULL; + u8 sblink; + + if (!CONFIG_SB_HT_CHAIN_ON_BUS0) + return; + + dev = dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB, 0)); + sblink = (pci_read_config32(dev, 0x64)>>8) & 3; + link = dev->link_list; + + while (link) { + if (link->link_num == sblink) { + if (!prev) + return; + prev->next = link->next; + link->next = dev->link_list; + dev->link_list = link; + return; + } + prev = link; + link = link->next; + } +} + static void amdk8_scan_chains(device_t dev) { unsigned nodeid; @@ -251,18 +281,8 @@ static void amdk8_scan_chains(device_t dev) if (nodeid == 0) sblink = (pci_read_config32(dev, 0x64)>>8) & 3; - // do sb ht chain at first, in case s2885 put sb chain (8131/8111) on link2, but put 8151 on link0 for (link = dev->link_list; link; link = link->next) { bool is_sblink = (nodeid == 0) && (link->link_num == sblink); - if ((CONFIG_SB_HT_CHAIN_ON_BUS0 > 0) && is_sblink) - max = amdk8_scan_chain(dev, nodeid, link, is_sblink, max); - } - - for (link = dev->link_list; link; link = link->next) { - bool is_sblink = (nodeid == 0) && (link->link_num == sblink); - if ((CONFIG_SB_HT_CHAIN_ON_BUS0 > 0) && is_sblink) - continue; - max = amdk8_scan_chain(dev, nodeid, link, is_sblink, max); } @@ -604,9 +624,15 @@ static const struct pci_driver mcf0_driver __pci_driver = { .device = 0x1100, }; +static void amdk8_nb_init(void *chip_info) +{ + relocate_sb_ht_chain(); +} + struct chip_operations northbridge_amd_amdk8_ops = { CHIP_NAME("AMD K8 Northbridge") .enable_dev = 0, + .init = amdk8_nb_init, }; static void amdk8_domain_read_resources(device_t dev)

1 0

Patch set updated for coreboot: a480a26 AMD K8 fam10: Refactor Kconfig SB_HT_CHAIN_ON_BUS0
by Kyösti Mälkki June 1, 2015

June 1, 2015

Kyösti Mälkki (kyosti.malkki(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8366 -gerrit commit a480a26919b644d4ef775d592709a1a0445af218 Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Thu Feb 5 15:48:38 2015 +0200 AMD K8 fam10: Refactor Kconfig SB_HT_CHAIN_ON_BUS0 If SB_HT_CHAIN_ON_BUS0 is selected, HyperTransport chain for System Bus is the first to scan and it will be assigned with bus number 0. If HT_CHAIN_DISTRIBUTE is selected, each link will reserve a fixed range of bus numbers instead of assigning consecutive numbers across all the links. All fam10 have SB_HT_CHAIN_ON_BUS0 selected under northbridge. Follow-up can easily drop this if we find this is dictated by architecture. Change-Id: I8deddcb4c3fd679b6b27e2879d9dba3895c4dd6f Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- src/mainboard/advansus/a785e-i/Kconfig | 4 ---- src/mainboard/amd/bimini_fam10/Kconfig | 4 ---- src/mainboard/amd/dbm690t/Kconfig | 4 ---- src/mainboard/amd/mahogany/Kconfig | 4 ---- src/mainboard/amd/mahogany_fam10/Kconfig | 4 ---- src/mainboard/amd/pistachio/Kconfig | 4 ---- src/mainboard/amd/serengeti_cheetah/Kconfig | 5 +---- src/mainboard/amd/serengeti_cheetah_fam10/Kconfig | 5 +---- src/mainboard/amd/tilapia_fam10/Kconfig | 4 ---- src/mainboard/arima/hdama/Kconfig | 4 ---- src/mainboard/asrock/939a785gmh/Kconfig | 4 ---- src/mainboard/asus/a8n_e/Kconfig | 5 +---- src/mainboard/asus/a8v-e_deluxe/Kconfig | 4 ---- src/mainboard/asus/a8v-e_se/Kconfig | 4 ---- src/mainboard/asus/k8v-x/Kconfig | 4 ---- src/mainboard/asus/kfsn4-dre/Kconfig | 4 ---- src/mainboard/asus/m2n-e/Kconfig | 5 +---- src/mainboard/asus/m2v-mx_se/Kconfig | 4 ---- src/mainboard/asus/m2v/Kconfig | 4 ---- src/mainboard/asus/m4a78-em/Kconfig | 4 ---- src/mainboard/asus/m4a785-m/Kconfig | 4 ---- src/mainboard/asus/m4a785t-m/Kconfig | 4 ---- src/mainboard/asus/m5a88-v/Kconfig | 4 ---- src/mainboard/avalue/eax-785e/Kconfig | 4 ---- src/mainboard/broadcom/blast/Kconfig | 4 ---- src/mainboard/gigabyte/ga_2761gxdk/Kconfig | 5 +---- src/mainboard/gigabyte/m57sli/Kconfig | 5 +---- src/mainboard/gigabyte/ma785gm/Kconfig | 4 ---- src/mainboard/gigabyte/ma785gmt/Kconfig | 4 ---- src/mainboard/gigabyte/ma78gm/Kconfig | 4 ---- src/mainboard/hp/dl145_g1/Kconfig | 5 +---- src/mainboard/hp/dl145_g3/Kconfig | 5 +---- src/mainboard/hp/dl165_g6_fam10/Kconfig | 5 +---- src/mainboard/iei/kino-780am2-fam10/Kconfig | 4 ---- src/mainboard/iwill/dk8_htx/Kconfig | 5 +---- src/mainboard/jetway/pa78vm5/Kconfig | 4 ---- src/mainboard/kontron/kt690/Kconfig | 4 ---- src/mainboard/msi/ms7135/Kconfig | 5 +---- src/mainboard/msi/ms7260/Kconfig | 5 +---- src/mainboard/msi/ms9185/Kconfig | 5 +---- src/mainboard/msi/ms9282/Kconfig | 4 ---- src/mainboard/msi/ms9652_fam10/Kconfig | 4 ---- src/mainboard/nvidia/l1_2pvv/Kconfig | 5 +---- src/mainboard/siemens/sitemp_g1p1/Kconfig | 4 ---- src/mainboard/sunw/ultra40/Kconfig | 5 +---- src/mainboard/supermicro/h8dme/Kconfig | 5 +---- src/mainboard/supermicro/h8dmr/Kconfig | 5 +---- src/mainboard/supermicro/h8dmr_fam10/Kconfig | 5 +---- src/mainboard/supermicro/h8qme_fam10/Kconfig | 5 +---- src/mainboard/supermicro/h8scm_fam10/Kconfig | 4 ---- src/mainboard/technexion/tim5690/Kconfig | 4 ---- src/mainboard/technexion/tim8690/Kconfig | 4 ---- src/mainboard/tyan/s2881/Kconfig | 5 +---- src/mainboard/tyan/s2885/Kconfig | 5 +---- src/mainboard/tyan/s2891/Kconfig | 5 +---- src/mainboard/tyan/s2892/Kconfig | 5 +---- src/mainboard/tyan/s2895/Kconfig | 5 +---- src/mainboard/tyan/s2912/Kconfig | 5 +---- src/mainboard/tyan/s2912_fam10/Kconfig | 5 +---- src/mainboard/winent/mb6047/Kconfig | 5 +---- src/northbridge/amd/amdfam10/Kconfig | 6 ++++++ src/northbridge/amd/amdfam10/northbridge.c | 4 ++-- src/northbridge/amd/amdk8/Kconfig | 6 ++++-- src/northbridge/amd/amdk8/northbridge.c | 4 ++-- 64 files changed, 41 insertions(+), 246 deletions(-) diff --git a/src/mainboard/advansus/a785e-i/Kconfig b/src/mainboard/advansus/a785e-i/Kconfig index 388249f..b6213d5 100644 --- a/src/mainboard/advansus/a785e-i/Kconfig +++ b/src/mainboard/advansus/a785e-i/Kconfig @@ -52,10 +52,6 @@ config HW_MEM_HOLE_SIZE_AUTO_INC bool default n -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/amd/bimini_fam10/Kconfig b/src/mainboard/amd/bimini_fam10/Kconfig index 369cb7e..261c60a 100644 --- a/src/mainboard/amd/bimini_fam10/Kconfig +++ b/src/mainboard/amd/bimini_fam10/Kconfig @@ -52,10 +52,6 @@ config HW_MEM_HOLE_SIZE_AUTO_INC bool default n -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/amd/dbm690t/Kconfig b/src/mainboard/amd/dbm690t/Kconfig index 70d63ad..77bafc5 100644 --- a/src/mainboard/amd/dbm690t/Kconfig +++ b/src/mainboard/amd/dbm690t/Kconfig @@ -36,10 +36,6 @@ config MAX_PHYSICAL_CPUS int default 1 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/amd/mahogany/Kconfig b/src/mainboard/amd/mahogany/Kconfig index 394ad77..8861b4a 100644 --- a/src/mainboard/amd/mahogany/Kconfig +++ b/src/mainboard/amd/mahogany/Kconfig @@ -47,10 +47,6 @@ config MAX_PHYSICAL_CPUS int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/amd/mahogany_fam10/Kconfig b/src/mainboard/amd/mahogany_fam10/Kconfig index ec5ca0b..393882c 100644 --- a/src/mainboard/amd/mahogany_fam10/Kconfig +++ b/src/mainboard/amd/mahogany_fam10/Kconfig @@ -40,10 +40,6 @@ config MAX_PHYSICAL_CPUS int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/amd/pistachio/Kconfig b/src/mainboard/amd/pistachio/Kconfig index 9a91eec..2296e82 100644 --- a/src/mainboard/amd/pistachio/Kconfig +++ b/src/mainboard/amd/pistachio/Kconfig @@ -44,10 +44,6 @@ config MAX_PHYSICAL_CPUS int default 1 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/amd/serengeti_cheetah/Kconfig b/src/mainboard/amd/serengeti_cheetah/Kconfig index e1363eb..2d2d4d1 100644 --- a/src/mainboard/amd/serengeti_cheetah/Kconfig +++ b/src/mainboard/amd/serengeti_cheetah/Kconfig @@ -10,6 +10,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select NORTHBRIDGE_AMD_AMDK8 select SOUTHBRIDGE_AMD_AMD8111 select SOUTHBRIDGE_AMD_AMD8131 + select HT_CHAIN_DISTRIBUTE select SUPERIO_WINBOND_W83627HF select PARALLEL_CPU_INIT select HAVE_OPTION_TABLE @@ -55,10 +56,6 @@ config MEM_TRAIN_SEQ int default 1 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config HT_CHAIN_END_UNITID_BASE hex default 0x6 diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/Kconfig b/src/mainboard/amd/serengeti_cheetah_fam10/Kconfig index 2a3e6a7..3e6e025 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/Kconfig +++ b/src/mainboard/amd/serengeti_cheetah_fam10/Kconfig @@ -8,6 +8,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select NORTHBRIDGE_AMD_AMDFAM10 select SOUTHBRIDGE_AMD_AMD8111 select SOUTHBRIDGE_AMD_AMD8132 + select HT_CHAIN_DISTRIBUTE select SUPERIO_WINBOND_W83627HF select HAVE_OPTION_TABLE select HAVE_PIRQ_TABLE @@ -41,10 +42,6 @@ config MAX_PHYSICAL_CPUS int default 8 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config HT_CHAIN_END_UNITID_BASE hex default 0x6 diff --git a/src/mainboard/amd/tilapia_fam10/Kconfig b/src/mainboard/amd/tilapia_fam10/Kconfig index 901d6b1..254cf66 100644 --- a/src/mainboard/amd/tilapia_fam10/Kconfig +++ b/src/mainboard/amd/tilapia_fam10/Kconfig @@ -40,10 +40,6 @@ config MAX_PHYSICAL_CPUS int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/arima/hdama/Kconfig b/src/mainboard/arima/hdama/Kconfig index 49860b3..66177f5 100644 --- a/src/mainboard/arima/hdama/Kconfig +++ b/src/mainboard/arima/hdama/Kconfig @@ -38,10 +38,6 @@ config MAX_PHYSICAL_CPUS int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x20 diff --git a/src/mainboard/asrock/939a785gmh/Kconfig b/src/mainboard/asrock/939a785gmh/Kconfig index cfaa599..2148385 100644 --- a/src/mainboard/asrock/939a785gmh/Kconfig +++ b/src/mainboard/asrock/939a785gmh/Kconfig @@ -49,10 +49,6 @@ config MAX_PHYSICAL_CPUS int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/asus/a8n_e/Kconfig b/src/mainboard/asus/a8n_e/Kconfig index 5b7c1e6..1852ae4 100644 --- a/src/mainboard/asus/a8n_e/Kconfig +++ b/src/mainboard/asus/a8n_e/Kconfig @@ -5,6 +5,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select CPU_AMD_SOCKET_939 select NORTHBRIDGE_AMD_AMDK8 select SOUTHBRIDGE_NVIDIA_CK804 + select HT_CHAIN_DISTRIBUTE select SUPERIO_ITE_IT8712F select HAVE_OPTION_TABLE select HAVE_CMOS_DEFAULT @@ -54,10 +55,6 @@ config HT_CHAIN_UNITID_BASE hex default 0x0 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config IRQ_SLOT_COUNT int default 13 diff --git a/src/mainboard/asus/a8v-e_deluxe/Kconfig b/src/mainboard/asus/a8v-e_deluxe/Kconfig index 8ebff31..a1c2fd9 100644 --- a/src/mainboard/asus/a8v-e_deluxe/Kconfig +++ b/src/mainboard/asus/a8v-e_deluxe/Kconfig @@ -33,10 +33,6 @@ config APIC_ID_OFFSET hex default 0x10 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config MAINBOARD_PART_NUMBER string default "A8V-E Deluxe" diff --git a/src/mainboard/asus/a8v-e_se/Kconfig b/src/mainboard/asus/a8v-e_se/Kconfig index d819b0d..dffe9eb 100644 --- a/src/mainboard/asus/a8v-e_se/Kconfig +++ b/src/mainboard/asus/a8v-e_se/Kconfig @@ -33,10 +33,6 @@ config APIC_ID_OFFSET hex default 0x10 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config MAINBOARD_PART_NUMBER string default "A8V-E SE" diff --git a/src/mainboard/asus/k8v-x/Kconfig b/src/mainboard/asus/k8v-x/Kconfig index 1deb5b6..52bf661 100644 --- a/src/mainboard/asus/k8v-x/Kconfig +++ b/src/mainboard/asus/k8v-x/Kconfig @@ -32,10 +32,6 @@ config APIC_ID_OFFSET hex default 0x10 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config MAINBOARD_PART_NUMBER string default "K8V-X" diff --git a/src/mainboard/asus/kfsn4-dre/Kconfig b/src/mainboard/asus/kfsn4-dre/Kconfig index 47fccda..2750c17 100644 --- a/src/mainboard/asus/kfsn4-dre/Kconfig +++ b/src/mainboard/asus/kfsn4-dre/Kconfig @@ -44,10 +44,6 @@ config APIC_ID_OFFSET hex default 0 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config MAINBOARD_PART_NUMBER string default "KFSN4-DRE" diff --git a/src/mainboard/asus/m2n-e/Kconfig b/src/mainboard/asus/m2n-e/Kconfig index b7375f2..02e516e 100644 --- a/src/mainboard/asus/m2n-e/Kconfig +++ b/src/mainboard/asus/m2n-e/Kconfig @@ -26,6 +26,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select DIMM_DDR2 select NORTHBRIDGE_AMD_AMDK8 select SOUTHBRIDGE_NVIDIA_MCP55 + select HT_CHAIN_DISTRIBUTE select MCP55_USE_NIC select MCP55_USE_AZA select SUPERIO_ITE_IT8716F @@ -57,10 +58,6 @@ config MEM_TRAIN_SEQ int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config MAINBOARD_PART_NUMBER string default "M2N-E" diff --git a/src/mainboard/asus/m2v-mx_se/Kconfig b/src/mainboard/asus/m2v-mx_se/Kconfig index ab155b9..efcfc81 100644 --- a/src/mainboard/asus/m2v-mx_se/Kconfig +++ b/src/mainboard/asus/m2v-mx_se/Kconfig @@ -67,10 +67,6 @@ config HT_CHAIN_UNITID_BASE hex default 0x0 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x20 diff --git a/src/mainboard/asus/m2v/Kconfig b/src/mainboard/asus/m2v/Kconfig index 35ad38d..72527be 100644 --- a/src/mainboard/asus/m2v/Kconfig +++ b/src/mainboard/asus/m2v/Kconfig @@ -36,10 +36,6 @@ config APIC_ID_OFFSET hex default 0x10 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config MAINBOARD_PART_NUMBER string default "M2V" diff --git a/src/mainboard/asus/m4a78-em/Kconfig b/src/mainboard/asus/m4a78-em/Kconfig index b00a0b6..0382daf 100644 --- a/src/mainboard/asus/m4a78-em/Kconfig +++ b/src/mainboard/asus/m4a78-em/Kconfig @@ -39,10 +39,6 @@ config MAX_PHYSICAL_CPUS int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/asus/m4a785-m/Kconfig b/src/mainboard/asus/m4a785-m/Kconfig index f93c484..a945d2a 100644 --- a/src/mainboard/asus/m4a785-m/Kconfig +++ b/src/mainboard/asus/m4a785-m/Kconfig @@ -40,10 +40,6 @@ config MAX_PHYSICAL_CPUS int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/asus/m4a785t-m/Kconfig b/src/mainboard/asus/m4a785t-m/Kconfig index d98ad95..a347f02 100644 --- a/src/mainboard/asus/m4a785t-m/Kconfig +++ b/src/mainboard/asus/m4a785t-m/Kconfig @@ -42,10 +42,6 @@ config MAX_PHYSICAL_CPUS int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/asus/m5a88-v/Kconfig b/src/mainboard/asus/m5a88-v/Kconfig index 1430189..a5f19f5 100644 --- a/src/mainboard/asus/m5a88-v/Kconfig +++ b/src/mainboard/asus/m5a88-v/Kconfig @@ -50,10 +50,6 @@ config HW_MEM_HOLE_SIZE_AUTO_INC bool default n -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/avalue/eax-785e/Kconfig b/src/mainboard/avalue/eax-785e/Kconfig index 38a3aa3..9d7c2e0 100644 --- a/src/mainboard/avalue/eax-785e/Kconfig +++ b/src/mainboard/avalue/eax-785e/Kconfig @@ -52,10 +52,6 @@ config HW_MEM_HOLE_SIZE_AUTO_INC bool default n -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/broadcom/blast/Kconfig b/src/mainboard/broadcom/blast/Kconfig index b821f7a..ddd2aca 100644 --- a/src/mainboard/broadcom/blast/Kconfig +++ b/src/mainboard/broadcom/blast/Kconfig @@ -31,10 +31,6 @@ config APIC_ID_OFFSET hex default 0x0 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config MAINBOARD_PART_NUMBER string default "Blast" diff --git a/src/mainboard/gigabyte/ga_2761gxdk/Kconfig b/src/mainboard/gigabyte/ga_2761gxdk/Kconfig index a79c28f..e182c99 100644 --- a/src/mainboard/gigabyte/ga_2761gxdk/Kconfig +++ b/src/mainboard/gigabyte/ga_2761gxdk/Kconfig @@ -6,6 +6,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select DIMM_DDR2 select NORTHBRIDGE_AMD_AMDK8 select SOUTHBRIDGE_SIS_SIS966 + select HT_CHAIN_DISTRIBUTE select SUPERIO_ITE_IT8716F select PARALLEL_CPU_INIT select HAVE_OPTION_TABLE @@ -37,10 +38,6 @@ config MEM_TRAIN_SEQ int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config MAINBOARD_PART_NUMBER string default "GA-2761GXDK" diff --git a/src/mainboard/gigabyte/m57sli/Kconfig b/src/mainboard/gigabyte/m57sli/Kconfig index 6ef94ce..cc8be43 100644 --- a/src/mainboard/gigabyte/m57sli/Kconfig +++ b/src/mainboard/gigabyte/m57sli/Kconfig @@ -6,6 +6,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select DIMM_DDR2 select NORTHBRIDGE_AMD_AMDK8 select SOUTHBRIDGE_NVIDIA_MCP55 + select HT_CHAIN_DISTRIBUTE select MCP55_USE_NIC select MCP55_USE_AZA select SUPERIO_ITE_IT8716F @@ -41,10 +42,6 @@ config MEM_TRAIN_SEQ int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config MAINBOARD_PART_NUMBER string default "GA-M57SLI-S4" diff --git a/src/mainboard/gigabyte/ma785gm/Kconfig b/src/mainboard/gigabyte/ma785gm/Kconfig index 8f44e76..bf441e9 100644 --- a/src/mainboard/gigabyte/ma785gm/Kconfig +++ b/src/mainboard/gigabyte/ma785gm/Kconfig @@ -40,10 +40,6 @@ config MAX_PHYSICAL_CPUS int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/gigabyte/ma785gmt/Kconfig b/src/mainboard/gigabyte/ma785gmt/Kconfig index 03b9237..827c8da 100644 --- a/src/mainboard/gigabyte/ma785gmt/Kconfig +++ b/src/mainboard/gigabyte/ma785gmt/Kconfig @@ -40,10 +40,6 @@ config MAX_PHYSICAL_CPUS int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/gigabyte/ma78gm/Kconfig b/src/mainboard/gigabyte/ma78gm/Kconfig index 32421e8..3d85708 100644 --- a/src/mainboard/gigabyte/ma78gm/Kconfig +++ b/src/mainboard/gigabyte/ma78gm/Kconfig @@ -40,10 +40,6 @@ config MAX_PHYSICAL_CPUS int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/hp/dl145_g1/Kconfig b/src/mainboard/hp/dl145_g1/Kconfig index 0c6d642..74ce0e7 100644 --- a/src/mainboard/hp/dl145_g1/Kconfig +++ b/src/mainboard/hp/dl145_g1/Kconfig @@ -6,6 +6,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select NORTHBRIDGE_AMD_AMDK8 select SOUTHBRIDGE_AMD_AMD8131 select SOUTHBRIDGE_AMD_AMD8111 + select HT_CHAIN_DISTRIBUTE select SUPERIO_WINBOND_W83627HF select HAVE_HARD_RESET select HAVE_OPTION_TABLE @@ -28,10 +29,6 @@ config APIC_ID_OFFSET hex default 0x0 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config MAINBOARD_PART_NUMBER string default "ProLiant DL145 G1" diff --git a/src/mainboard/hp/dl145_g3/Kconfig b/src/mainboard/hp/dl145_g3/Kconfig index 439188a..da20fb3 100644 --- a/src/mainboard/hp/dl145_g3/Kconfig +++ b/src/mainboard/hp/dl145_g3/Kconfig @@ -8,6 +8,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select NORTHBRIDGE_AMD_AMDK8 select SOUTHBRIDGE_BROADCOM_BCM21000 select SOUTHBRIDGE_BROADCOM_BCM5785 + select HT_CHAIN_DISTRIBUTE select SUPERIO_SERVERENGINES_PILOT select SUPERIO_NSC_PC87417 select HAVE_OPTION_TABLE @@ -56,10 +57,6 @@ config HT_CHAIN_UNITID_BASE hex default 0x6 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config IRQ_SLOT_COUNT int default 15 diff --git a/src/mainboard/hp/dl165_g6_fam10/Kconfig b/src/mainboard/hp/dl165_g6_fam10/Kconfig index 8376d89..ca36aaf 100644 --- a/src/mainboard/hp/dl165_g6_fam10/Kconfig +++ b/src/mainboard/hp/dl165_g6_fam10/Kconfig @@ -6,6 +6,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select NORTHBRIDGE_AMD_AMDFAM10 select SOUTHBRIDGE_BROADCOM_BCM21000 select SOUTHBRIDGE_BROADCOM_BCM5785 + select HT_CHAIN_DISTRIBUTE select SUPERIO_SERVERENGINES_PILOT select SUPERIO_NSC_PC87417 select DIMM_DDR2 @@ -55,10 +56,6 @@ config HT_CHAIN_UNITID_BASE hex default 0x6 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config IRQ_SLOT_COUNT int default 15 diff --git a/src/mainboard/iei/kino-780am2-fam10/Kconfig b/src/mainboard/iei/kino-780am2-fam10/Kconfig index deea898..4b3bce6 100644 --- a/src/mainboard/iei/kino-780am2-fam10/Kconfig +++ b/src/mainboard/iei/kino-780am2-fam10/Kconfig @@ -40,10 +40,6 @@ config MAX_PHYSICAL_CPUS int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/iwill/dk8_htx/Kconfig b/src/mainboard/iwill/dk8_htx/Kconfig index cdfd99a..929f47f 100644 --- a/src/mainboard/iwill/dk8_htx/Kconfig +++ b/src/mainboard/iwill/dk8_htx/Kconfig @@ -6,6 +6,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select NORTHBRIDGE_AMD_AMDK8 select SOUTHBRIDGE_AMD_AMD8111 select SOUTHBRIDGE_AMD_AMD8131 + select HT_CHAIN_DISTRIBUTE select SUPERIO_WINBOND_W83627HF select PARALLEL_CPU_INIT select HAVE_OPTION_TABLE @@ -38,10 +39,6 @@ config MAX_PHYSICAL_CPUS int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config HT_CHAIN_END_UNITID_BASE hex default 0x6 diff --git a/src/mainboard/jetway/pa78vm5/Kconfig b/src/mainboard/jetway/pa78vm5/Kconfig index b13bead..30478d2 100644 --- a/src/mainboard/jetway/pa78vm5/Kconfig +++ b/src/mainboard/jetway/pa78vm5/Kconfig @@ -40,10 +40,6 @@ config MAX_PHYSICAL_CPUS int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/kontron/kt690/Kconfig b/src/mainboard/kontron/kt690/Kconfig index 8d1f039..e679e66 100644 --- a/src/mainboard/kontron/kt690/Kconfig +++ b/src/mainboard/kontron/kt690/Kconfig @@ -37,10 +37,6 @@ config MAX_PHYSICAL_CPUS int default 1 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/msi/ms7135/Kconfig b/src/mainboard/msi/ms7135/Kconfig index f2cfd9a..50f989e 100644 --- a/src/mainboard/msi/ms7135/Kconfig +++ b/src/mainboard/msi/ms7135/Kconfig @@ -5,6 +5,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select CPU_AMD_SOCKET_754 select NORTHBRIDGE_AMD_AMDK8 select SOUTHBRIDGE_NVIDIA_CK804 + select HT_CHAIN_DISTRIBUTE select SUPERIO_WINBOND_W83627THG select HAVE_OPTION_TABLE select HAVE_PIRQ_TABLE @@ -43,10 +44,6 @@ config HT_CHAIN_END_UNITID_BASE hex default 0x20 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config IRQ_SLOT_COUNT int default 13 diff --git a/src/mainboard/msi/ms7260/Kconfig b/src/mainboard/msi/ms7260/Kconfig index 0e7e592..e3863a0 100644 --- a/src/mainboard/msi/ms7260/Kconfig +++ b/src/mainboard/msi/ms7260/Kconfig @@ -6,6 +6,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select DIMM_DDR2 select NORTHBRIDGE_AMD_AMDK8 select SOUTHBRIDGE_NVIDIA_MCP55 + select HT_CHAIN_DISTRIBUTE select MCP55_USE_NIC select MCP55_USE_AZA select SUPERIO_WINBOND_W83627EHG @@ -39,10 +40,6 @@ config MEM_TRAIN_SEQ int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config MAINBOARD_PART_NUMBER string default "MS-7260" diff --git a/src/mainboard/msi/ms9185/Kconfig b/src/mainboard/msi/ms9185/Kconfig index 0b0ff1c..355fdcf 100644 --- a/src/mainboard/msi/ms9185/Kconfig +++ b/src/mainboard/msi/ms9185/Kconfig @@ -8,6 +8,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select NORTHBRIDGE_AMD_AMDK8 select SOUTHBRIDGE_BROADCOM_BCM5780 select SOUTHBRIDGE_BROADCOM_BCM5785 + select HT_CHAIN_DISTRIBUTE select SUPERIO_NSC_PC87417 select HAVE_OPTION_TABLE select HAVE_PIRQ_TABLE @@ -34,10 +35,6 @@ config APIC_ID_OFFSET hex default 0x8 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config MAINBOARD_PART_NUMBER string default "MS-9185" diff --git a/src/mainboard/msi/ms9282/Kconfig b/src/mainboard/msi/ms9282/Kconfig index f109375..dd96992 100644 --- a/src/mainboard/msi/ms9282/Kconfig +++ b/src/mainboard/msi/ms9282/Kconfig @@ -33,10 +33,6 @@ config APIC_ID_OFFSET hex default 0x10 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config MAINBOARD_PART_NUMBER string default "MS-9282" diff --git a/src/mainboard/msi/ms9652_fam10/Kconfig b/src/mainboard/msi/ms9652_fam10/Kconfig index c1c095b..c64fdda 100644 --- a/src/mainboard/msi/ms9652_fam10/Kconfig +++ b/src/mainboard/msi/ms9652_fam10/Kconfig @@ -76,10 +76,6 @@ config HT_CHAIN_END_UNITID_BASE hex default 0x00 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config VAR_MTRR_HOLE bool default n diff --git a/src/mainboard/nvidia/l1_2pvv/Kconfig b/src/mainboard/nvidia/l1_2pvv/Kconfig index 57911f7..e9664ac 100644 --- a/src/mainboard/nvidia/l1_2pvv/Kconfig +++ b/src/mainboard/nvidia/l1_2pvv/Kconfig @@ -7,6 +7,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select DIMM_REGISTERED select NORTHBRIDGE_AMD_AMDK8 select SOUTHBRIDGE_NVIDIA_MCP55 + select HT_CHAIN_DISTRIBUTE select MCP55_USE_NIC select MCP55_USE_AZA select SUPERIO_WINBOND_W83627EHG @@ -43,10 +44,6 @@ config MCP55_NUM int default 2 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config MAINBOARD_PART_NUMBER string default "l1_2pvv" diff --git a/src/mainboard/siemens/sitemp_g1p1/Kconfig b/src/mainboard/siemens/sitemp_g1p1/Kconfig index dff329f..d9ad74b 100644 --- a/src/mainboard/siemens/sitemp_g1p1/Kconfig +++ b/src/mainboard/siemens/sitemp_g1p1/Kconfig @@ -43,10 +43,6 @@ config MAX_PHYSICAL_CPUS int default 1 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/sunw/ultra40/Kconfig b/src/mainboard/sunw/ultra40/Kconfig index 8f3ff2a..a29cf16 100644 --- a/src/mainboard/sunw/ultra40/Kconfig +++ b/src/mainboard/sunw/ultra40/Kconfig @@ -5,6 +5,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select CPU_AMD_SOCKET_940 select NORTHBRIDGE_AMD_AMDK8 select SOUTHBRIDGE_NVIDIA_CK804 + select HT_CHAIN_DISTRIBUTE select SUPERIO_SMSC_LPC47B397 select SUPERIO_SMSC_LPC47M10X select HAVE_OPTION_TABLE @@ -56,10 +57,6 @@ config HT_CHAIN_UNITID_BASE hex default 0x0 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config IRQ_SLOT_COUNT int default 11 diff --git a/src/mainboard/supermicro/h8dme/Kconfig b/src/mainboard/supermicro/h8dme/Kconfig index 52d5581..35f9bf0 100644 --- a/src/mainboard/supermicro/h8dme/Kconfig +++ b/src/mainboard/supermicro/h8dme/Kconfig @@ -7,6 +7,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select DIMM_REGISTERED select NORTHBRIDGE_AMD_AMDK8 select SOUTHBRIDGE_NVIDIA_MCP55 + select HT_CHAIN_DISTRIBUTE select MCP55_USE_NIC select MCP55_USE_AZA select SUPERIO_WINBOND_W83627HF @@ -60,10 +61,6 @@ config HT_CHAIN_UNITID_BASE hex default 0x0 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config IRQ_SLOT_COUNT int default 11 diff --git a/src/mainboard/supermicro/h8dmr/Kconfig b/src/mainboard/supermicro/h8dmr/Kconfig index f85460b..9efc5d2 100644 --- a/src/mainboard/supermicro/h8dmr/Kconfig +++ b/src/mainboard/supermicro/h8dmr/Kconfig @@ -7,6 +7,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select DIMM_REGISTERED select NORTHBRIDGE_AMD_AMDK8 select SOUTHBRIDGE_NVIDIA_MCP55 + select HT_CHAIN_DISTRIBUTE select MCP55_USE_NIC select MCP55_USE_AZA select SUPERIO_WINBOND_W83627HF @@ -59,10 +60,6 @@ config HT_CHAIN_UNITID_BASE hex default 0x0 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config IRQ_SLOT_COUNT int default 11 diff --git a/src/mainboard/supermicro/h8dmr_fam10/Kconfig b/src/mainboard/supermicro/h8dmr_fam10/Kconfig index 0f94620..0d20204 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/Kconfig +++ b/src/mainboard/supermicro/h8dmr_fam10/Kconfig @@ -7,6 +7,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select DIMM_REGISTERED select NORTHBRIDGE_AMD_AMDFAM10 select SOUTHBRIDGE_NVIDIA_MCP55 + select HT_CHAIN_DISTRIBUTE select MCP55_USE_NIC select MCP55_USE_AZA select SUPERIO_WINBOND_W83627HF @@ -55,10 +56,6 @@ config HT_CHAIN_UNITID_BASE hex default 0x1 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config IRQ_SLOT_COUNT int default 11 diff --git a/src/mainboard/supermicro/h8qme_fam10/Kconfig b/src/mainboard/supermicro/h8qme_fam10/Kconfig index 5b195bb..27a74bb 100644 --- a/src/mainboard/supermicro/h8qme_fam10/Kconfig +++ b/src/mainboard/supermicro/h8qme_fam10/Kconfig @@ -8,6 +8,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select NORTHBRIDGE_AMD_AMDFAM10 select SOUTHBRIDGE_AMD_AMD8132 select SOUTHBRIDGE_NVIDIA_MCP55 + select HT_CHAIN_DISTRIBUTE select SUPERIO_WINBOND_W83627HF select HAVE_OPTION_TABLE select HAVE_PIRQ_TABLE @@ -53,10 +54,6 @@ config HT_CHAIN_UNITID_BASE hex default 0x1 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config IRQ_SLOT_COUNT int default 11 diff --git a/src/mainboard/supermicro/h8scm_fam10/Kconfig b/src/mainboard/supermicro/h8scm_fam10/Kconfig index 3105493..0673390 100644 --- a/src/mainboard/supermicro/h8scm_fam10/Kconfig +++ b/src/mainboard/supermicro/h8scm_fam10/Kconfig @@ -40,10 +40,6 @@ config MAX_PHYSICAL_CPUS int default 1 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/technexion/tim5690/Kconfig b/src/mainboard/technexion/tim5690/Kconfig index 98dce39..0220d77 100644 --- a/src/mainboard/technexion/tim5690/Kconfig +++ b/src/mainboard/technexion/tim5690/Kconfig @@ -37,10 +37,6 @@ config MAX_PHYSICAL_CPUS int default 1 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/technexion/tim8690/Kconfig b/src/mainboard/technexion/tim8690/Kconfig index 4e0b25a..ad80e85 100644 --- a/src/mainboard/technexion/tim8690/Kconfig +++ b/src/mainboard/technexion/tim8690/Kconfig @@ -36,10 +36,6 @@ config MAX_PHYSICAL_CPUS int default 1 -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - config HT_CHAIN_END_UNITID_BASE hex default 0x1 diff --git a/src/mainboard/tyan/s2881/Kconfig b/src/mainboard/tyan/s2881/Kconfig index 6c759e1..de641cd 100644 --- a/src/mainboard/tyan/s2881/Kconfig +++ b/src/mainboard/tyan/s2881/Kconfig @@ -6,6 +6,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select NORTHBRIDGE_AMD_AMDK8 select SOUTHBRIDGE_AMD_AMD8131 select SOUTHBRIDGE_AMD_AMD8111 + select HT_CHAIN_DISTRIBUTE select SUPERIO_WINBOND_W83627HF select HAVE_OPTION_TABLE select HAVE_PIRQ_TABLE @@ -24,10 +25,6 @@ config APIC_ID_OFFSET hex default 0x0 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config MAINBOARD_PART_NUMBER string default "S2881" diff --git a/src/mainboard/tyan/s2885/Kconfig b/src/mainboard/tyan/s2885/Kconfig index 86e43f8..b218ab7 100644 --- a/src/mainboard/tyan/s2885/Kconfig +++ b/src/mainboard/tyan/s2885/Kconfig @@ -7,6 +7,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select SOUTHBRIDGE_AMD_AMD8111 select SOUTHBRIDGE_AMD_AMD8131 select SOUTHBRIDGE_AMD_AMD8151 + select HT_CHAIN_DISTRIBUTE select SUPERIO_WINBOND_W83627HF select HAVE_OPTION_TABLE select HAVE_PIRQ_TABLE @@ -23,10 +24,6 @@ config APIC_ID_OFFSET hex default 0x10 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config MAINBOARD_PART_NUMBER string default "S2885" diff --git a/src/mainboard/tyan/s2891/Kconfig b/src/mainboard/tyan/s2891/Kconfig index 3d1c1fb..238f5bc 100644 --- a/src/mainboard/tyan/s2891/Kconfig +++ b/src/mainboard/tyan/s2891/Kconfig @@ -6,6 +6,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select NORTHBRIDGE_AMD_AMDK8 select SOUTHBRIDGE_NVIDIA_CK804 select SOUTHBRIDGE_AMD_AMD8131 + select HT_CHAIN_DISTRIBUTE select SUPERIO_WINBOND_W83627HF select HAVE_OPTION_TABLE select HAVE_PIRQ_TABLE @@ -23,10 +24,6 @@ config APIC_ID_OFFSET hex default 0x10 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config MAINBOARD_PART_NUMBER string default "S2891" diff --git a/src/mainboard/tyan/s2892/Kconfig b/src/mainboard/tyan/s2892/Kconfig index b9c4105..cbe076c 100644 --- a/src/mainboard/tyan/s2892/Kconfig +++ b/src/mainboard/tyan/s2892/Kconfig @@ -6,6 +6,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select NORTHBRIDGE_AMD_AMDK8 select SOUTHBRIDGE_NVIDIA_CK804 select SOUTHBRIDGE_AMD_AMD8131 + select HT_CHAIN_DISTRIBUTE select SUPERIO_WINBOND_W83627HF select HAVE_OPTION_TABLE select HAVE_PIRQ_TABLE @@ -43,10 +44,6 @@ config HT_CHAIN_END_UNITID_BASE hex default 0x20 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config IRQ_SLOT_COUNT int default 11 diff --git a/src/mainboard/tyan/s2895/Kconfig b/src/mainboard/tyan/s2895/Kconfig index 544b0c5..21db63c 100644 --- a/src/mainboard/tyan/s2895/Kconfig +++ b/src/mainboard/tyan/s2895/Kconfig @@ -6,6 +6,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select NORTHBRIDGE_AMD_AMDK8 select SOUTHBRIDGE_NVIDIA_CK804 select SOUTHBRIDGE_AMD_AMD8131 + select HT_CHAIN_DISTRIBUTE select SUPERIO_SMSC_LPC47B397 select HAVE_OPTION_TABLE select HAVE_PIRQ_TABLE @@ -47,10 +48,6 @@ config HT_CHAIN_END_UNITID_BASE hex default 0x20 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config IRQ_SLOT_COUNT int default 11 diff --git a/src/mainboard/tyan/s2912/Kconfig b/src/mainboard/tyan/s2912/Kconfig index 26d9a53..7ad1a1c 100644 --- a/src/mainboard/tyan/s2912/Kconfig +++ b/src/mainboard/tyan/s2912/Kconfig @@ -7,6 +7,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select DIMM_REGISTERED select NORTHBRIDGE_AMD_AMDK8 select SOUTHBRIDGE_NVIDIA_MCP55 + select HT_CHAIN_DISTRIBUTE select MCP55_USE_NIC select SUPERIO_WINBOND_W83627HF select PARALLEL_CPU_INIT @@ -38,10 +39,6 @@ config MEM_TRAIN_SEQ int default 1 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config MAINBOARD_PART_NUMBER string default "S2912" diff --git a/src/mainboard/tyan/s2912_fam10/Kconfig b/src/mainboard/tyan/s2912_fam10/Kconfig index 1dd74ca..b5e31fa 100644 --- a/src/mainboard/tyan/s2912_fam10/Kconfig +++ b/src/mainboard/tyan/s2912_fam10/Kconfig @@ -7,6 +7,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select DIMM_REGISTERED select NORTHBRIDGE_AMD_AMDFAM10 select SOUTHBRIDGE_NVIDIA_MCP55 + select HT_CHAIN_DISTRIBUTE select MCP55_USE_NIC select SUPERIO_WINBOND_W83627HF select PARALLEL_CPU_INIT @@ -35,10 +36,6 @@ config APIC_ID_OFFSET hex default 0 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config MAINBOARD_PART_NUMBER string default "S2912 (Fam10)" diff --git a/src/mainboard/winent/mb6047/Kconfig b/src/mainboard/winent/mb6047/Kconfig index 86b0ae0..622441e 100644 --- a/src/mainboard/winent/mb6047/Kconfig +++ b/src/mainboard/winent/mb6047/Kconfig @@ -5,6 +5,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select CPU_AMD_SOCKET_940 select NORTHBRIDGE_AMD_AMDK8 select SOUTHBRIDGE_NVIDIA_CK804 + select HT_CHAIN_DISTRIBUTE select SUPERIO_WINBOND_W83627THG select HAVE_OPTION_TABLE select HAVE_PIRQ_TABLE @@ -25,10 +26,6 @@ config APIC_ID_OFFSET hex default 0x10 -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - config MAINBOARD_PART_NUMBER string default "MB6047" diff --git a/src/northbridge/amd/amdfam10/Kconfig b/src/northbridge/amd/amdfam10/Kconfig index b298ee1..fa8a26a 100644 --- a/src/northbridge/amd/amdfam10/Kconfig +++ b/src/northbridge/amd/amdfam10/Kconfig @@ -64,6 +64,12 @@ config SB_HT_CHAIN_UNITID_OFFSET_ONLY bool default n +config SB_HT_CHAIN_ON_BUS0 + def_bool y + +config HT_CHAIN_DISTRIBUTE + def_bool n + config DIMM_FBDIMM bool default n diff --git a/src/northbridge/amd/amdfam10/northbridge.c b/src/northbridge/amd/amdfam10/northbridge.c index 2334a13..ae7a932 100644 --- a/src/northbridge/amd/amdfam10/northbridge.c +++ b/src/northbridge/amd/amdfam10/northbridge.c @@ -216,11 +216,11 @@ static u32 amdfam10_scan_chain(device_t dev, u32 nodeid, struct bus *link, bool * so we set the subordinate bus number to 0xff for the moment. */ - if ((CONFIG_SB_HT_CHAIN_ON_BUS0 == 0) || !is_sblink) + if (!CONFIG_SB_HT_CHAIN_ON_BUS0 || !is_sblink) max++; /* One node can have 8 link and segn is the same. */ - if ((CONFIG_SB_HT_CHAIN_ON_BUS0 > 1) && !is_sblink) + if (CONFIG_HT_CHAIN_DISTRIBUTE && !is_sblink) max = ALIGN_UP(max, 8); link->secondary = max; diff --git a/src/northbridge/amd/amdk8/Kconfig b/src/northbridge/amd/amdk8/Kconfig index cc0cc66..b293ce3 100644 --- a/src/northbridge/amd/amdk8/Kconfig +++ b/src/northbridge/amd/amdk8/Kconfig @@ -65,8 +65,10 @@ config SB_HT_CHAIN_UNITID_OFFSET_ONLY default n config SB_HT_CHAIN_ON_BUS0 - int - default 0 + def_bool y + +config HT_CHAIN_DISTRIBUTE + def_bool n config QRANK_DIMM_SUPPORT bool diff --git a/src/northbridge/amd/amdk8/northbridge.c b/src/northbridge/amd/amdk8/northbridge.c index bdfe355..3ac626d 100644 --- a/src/northbridge/amd/amdk8/northbridge.c +++ b/src/northbridge/amd/amdk8/northbridge.c @@ -179,11 +179,11 @@ static u32 amdk8_scan_chain(device_t dev, u32 nodeid, struct bus *link, bool is_ * so we set the subordinate bus number to 0xff for the moment. */ - if ((CONFIG_SB_HT_CHAIN_ON_BUS0 == 0) || !is_sblink) + if (!CONFIG_SB_HT_CHAIN_ON_BUS0 || !is_sblink) max++; /* Second chain will be on 0x40, third 0x80, forth 0xc0. */ - if ((CONFIG_SB_HT_CHAIN_ON_BUS0 > 1) && !is_sblink) + if (CONFIG_HT_CHAIN_DISTRIBUTE && !is_sblink) max = ALIGN_UP(max, 0x40); link->secondary = max;

1 0

Patch set updated for coreboot: 5ca67bf AMD K8 fam10: Always have SB_HT_CHAIN_ON_BUS0
by Kyösti Mälkki June 1, 2015

June 1, 2015

Kyösti Mälkki (kyosti.malkki(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8561 -gerrit commit 5ca67bf0cf3d7a755d55dedb44e583d266ef2d0c Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Thu Feb 5 15:43:23 2015 +0200 AMD K8 fam10: Always have SB_HT_CHAIN_ON_BUS0 Change-Id: I65fad1cfba95f0ee1ed3f7f7a57d874144da1e40 Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- src/northbridge/amd/amdfam10/Kconfig | 3 --- src/northbridge/amd/amdfam10/northbridge.c | 5 +---- src/northbridge/amd/amdk8/Kconfig | 3 --- src/northbridge/amd/amdk8/northbridge.c | 5 +---- 4 files changed, 2 insertions(+), 14 deletions(-) diff --git a/src/northbridge/amd/amdfam10/Kconfig b/src/northbridge/amd/amdfam10/Kconfig index fa8a26a..0987a1f 100644 --- a/src/northbridge/amd/amdfam10/Kconfig +++ b/src/northbridge/amd/amdfam10/Kconfig @@ -64,9 +64,6 @@ config SB_HT_CHAIN_UNITID_OFFSET_ONLY bool default n -config SB_HT_CHAIN_ON_BUS0 - def_bool y - config HT_CHAIN_DISTRIBUTE def_bool n diff --git a/src/northbridge/amd/amdfam10/northbridge.c b/src/northbridge/amd/amdfam10/northbridge.c index ae7a932..0162445 100644 --- a/src/northbridge/amd/amdfam10/northbridge.c +++ b/src/northbridge/amd/amdfam10/northbridge.c @@ -216,7 +216,7 @@ static u32 amdfam10_scan_chain(device_t dev, u32 nodeid, struct bus *link, bool * so we set the subordinate bus number to 0xff for the moment. */ - if (!CONFIG_SB_HT_CHAIN_ON_BUS0 || !is_sblink) + if (!is_sblink) max++; /* One node can have 8 link and segn is the same. */ @@ -280,9 +280,6 @@ static void relocate_sb_ht_chain(void) struct bus *link, *prev = NULL; u8 sblink; - if (!CONFIG_SB_HT_CHAIN_ON_BUS0) - return; - dev = dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB, 0)); sblink = (pci_read_config32(dev, 0x64)>>8) & 7; link = dev->link_list; diff --git a/src/northbridge/amd/amdk8/Kconfig b/src/northbridge/amd/amdk8/Kconfig index b293ce3..21d3c29 100644 --- a/src/northbridge/amd/amdk8/Kconfig +++ b/src/northbridge/amd/amdk8/Kconfig @@ -64,9 +64,6 @@ config SB_HT_CHAIN_UNITID_OFFSET_ONLY bool default n -config SB_HT_CHAIN_ON_BUS0 - def_bool y - config HT_CHAIN_DISTRIBUTE def_bool n diff --git a/src/northbridge/amd/amdk8/northbridge.c b/src/northbridge/amd/amdk8/northbridge.c index 3ac626d..84c1144 100644 --- a/src/northbridge/amd/amdk8/northbridge.c +++ b/src/northbridge/amd/amdk8/northbridge.c @@ -179,7 +179,7 @@ static u32 amdk8_scan_chain(device_t dev, u32 nodeid, struct bus *link, bool is_ * so we set the subordinate bus number to 0xff for the moment. */ - if (!CONFIG_SB_HT_CHAIN_ON_BUS0 || !is_sblink) + if (!is_sblink) max++; /* Second chain will be on 0x40, third 0x80, forth 0xc0. */ @@ -249,9 +249,6 @@ static void relocate_sb_ht_chain(void) struct bus *link, *prev = NULL; u8 sblink; - if (!CONFIG_SB_HT_CHAIN_ON_BUS0) - return; - dev = dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB, 0)); sblink = (pci_read_config32(dev, 0x64)>>8) & 3; link = dev->link_list;

1 0

Patch set updated for coreboot: 0f9f2d3 AMD K8 fam10: Refactor logic around SB_HT_CHAIN_ON_BUS0
by Kyösti Mälkki June 1, 2015

June 1, 2015

Kyösti Mälkki (kyosti.malkki(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8365 -gerrit commit 0f9f2d3e0c660f669747a1faca52f9b165e3fd3b Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Thu Feb 5 13:36:54 2015 +0200 AMD K8 fam10: Refactor logic around SB_HT_CHAIN_ON_BUS0 Change-Id: I452a93af452073eeac4e6cb9bbc232dc59e911c1 Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- src/northbridge/amd/amdfam10/northbridge.c | 14 +++----------- src/northbridge/amd/amdk8/northbridge.c | 12 ++++-------- 2 files changed, 7 insertions(+), 19 deletions(-) diff --git a/src/northbridge/amd/amdfam10/northbridge.c b/src/northbridge/amd/amdfam10/northbridge.c index c3f7856..7fee62a 100644 --- a/src/northbridge/amd/amdfam10/northbridge.c +++ b/src/northbridge/amd/amdfam10/northbridge.c @@ -216,20 +216,12 @@ static u32 amdfam10_scan_chain(device_t dev, u32 nodeid, struct bus *link, bool * so we set the subordinate bus number to 0xff for the moment. */ - if (CONFIG_SB_HT_CHAIN_ON_BUS0 == 0) { + if ((CONFIG_SB_HT_CHAIN_ON_BUS0 == 0) || !is_sblink) max++; - } else if (is_sblink) { - } else if (CONFIG_SB_HT_CHAIN_ON_BUS0 == 1) { - max++; - } else if (CONFIG_SB_HT_CHAIN_ON_BUS0 > 1) { - // We can have 16 segmment and every segment have 256 bus, - // For that case need the kernel support mmio pci config. - - /* One node can have 8 link and segn is the same. */ - max++; + /* One node can have 8 link and segn is the same. */ + if ((CONFIG_SB_HT_CHAIN_ON_BUS0 > 1) && !is_sblink) max = ALIGN_UP(max, 8); - } link->secondary = max; link->subordinate = link->secondary; diff --git a/src/northbridge/amd/amdk8/northbridge.c b/src/northbridge/amd/amdk8/northbridge.c index e087888..7184c38 100644 --- a/src/northbridge/amd/amdk8/northbridge.c +++ b/src/northbridge/amd/amdk8/northbridge.c @@ -178,17 +178,13 @@ static u32 amdk8_scan_chain(device_t dev, u32 nodeid, struct bus *link, bool is_ * We have no idea how many busses are behind this bridge yet, * so we set the subordinate bus number to 0xff for the moment. */ - if (CONFIG_SB_HT_CHAIN_ON_BUS0 == 0) { - max++; - } else if (is_sblink) { - } else if (CONFIG_SB_HT_CHAIN_ON_BUS0 == 1) { - max++; - } else if (CONFIG_SB_HT_CHAIN_ON_BUS0 > 1) { - /* Second chain will be on 0x40, third 0x80, forth 0xc0. */ + if ((CONFIG_SB_HT_CHAIN_ON_BUS0 == 0) || !is_sblink) max++; + + /* Second chain will be on 0x40, third 0x80, forth 0xc0. */ + if ((CONFIG_SB_HT_CHAIN_ON_BUS0 > 1) && !is_sblink) max = ALIGN_UP(max, 0x40); - } link->secondary = max; link->subordinate = link->secondary;

1 0

Patch set updated for coreboot: a29a645 devicetree: Add fields for HyperTransport scans
by Kyösti Mälkki June 1, 2015

June 1, 2015

Kyösti Mälkki (kyosti.malkki(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8557 -gerrit commit a29a645eb1dc6f8fe6c38d7c3da68bc2c473ba2a Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Sun Feb 22 11:38:49 2015 +0200 devicetree: Add fields for HyperTransport scans Change-Id: I3b00e5e4e45089fbd7d0d6243d5e441bd8929c0b Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- src/include/device/device.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/src/include/device/device.h b/src/include/device/device.h index 9c53f95..396ecf8 100644 --- a/src/include/device/device.h +++ b/src/include/device/device.h @@ -86,6 +86,8 @@ struct bus { uint16_t secondary; /* secondary bus number */ uint16_t subordinate; /* max subordinate bus number */ unsigned char cap; /* PCi capability offset */ + uint32_t hcdn_reg; /* For HyperTransport link */ + unsigned reset_needed : 1; unsigned disable_relaxed_ordering : 1; };

1 0

Patch set updated for coreboot: 721fbde AMD K8: Refactor calls for HT configuration
by Kyösti Mälkki June 1, 2015

June 1, 2015

Kyösti Mälkki (kyosti.malkki(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8559 -gerrit commit 721fbdefc999ea81b499a575f046f41cb2c7edec Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Sat Feb 21 11:19:01 2015 +0200 AMD K8: Refactor calls for HT configuration Change-Id: I24ca1dce025e00064f9209affa27586292c7650e Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- src/northbridge/amd/amdk8/northbridge.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/src/northbridge/amd/amdk8/northbridge.c b/src/northbridge/amd/amdk8/northbridge.c index 7826749..e087888 100644 --- a/src/northbridge/amd/amdk8/northbridge.c +++ b/src/northbridge/amd/amdk8/northbridge.c @@ -232,18 +232,15 @@ static u32 amdk8_scan_chain(device_t dev, u32 nodeid, struct bus *link, bool is_ (link->subordinate << 24); f1_write_config32(config_reg, config_busses); - { - // use config_reg and ht_unitid_base to update hcdn_reg - int index; - u32 temp = 0; - index = (config_reg-0xe0) >> 2; - for(i=0;i<4;i++) { - temp |= (ht_unitid_base[i] & 0xff) << (i*8); - } - sysconf.hcdn_reg[index] = temp; + // use config_reg and ht_unitid_base to update hcdn_reg + link->hcdn_reg = 0; + for (i = 0; i < 4; i++) + link->hcdn_reg |= (ht_unitid_base[i] & 0xff) << (i*8); + + int index = (config_reg-0xe0) >> 2; + sysconf.hcdn_reg[index] = link->hcdn_reg; - } return link->subordinate; }

1 0

Patch set updated for coreboot: 1a8f632 AMD fam10: Refactor calls for HT configuration
by Kyösti Mälkki June 1, 2015

June 1, 2015

Kyösti Mälkki (kyosti.malkki(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8558 -gerrit commit 1a8f63209b9cd34fdc6958ceddcfc389d50a6ac2 Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Thu Mar 19 16:49:47 2015 +0200 AMD fam10: Refactor calls for HT configuration Change-Id: Ic8fbafdfadbc4ef0896d93e61c8a54ce69297e07 Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- src/northbridge/amd/amdfam10/ht_config.c | 71 +++++++++++++++++------------- src/northbridge/amd/amdfam10/ht_config.h | 15 +++---- src/northbridge/amd/amdfam10/northbridge.c | 33 +++++++------- 3 files changed, 60 insertions(+), 59 deletions(-) diff --git a/src/northbridge/amd/amdfam10/ht_config.c b/src/northbridge/amd/amdfam10/ht_config.c index 3110980..6eec534 100644 --- a/src/northbridge/amd/amdfam10/ht_config.c +++ b/src/northbridge/amd/amdfam10/ht_config.c @@ -47,54 +47,51 @@ struct dram_base_mask_t get_dram_base_mask(u32 nodeid) return d; } - -void set_config_map_reg(u32 nodeid, u32 linkn, u32 ht_c_index, - u32 busn_min, u32 busn_max, u32 segbit, - u32 nodes) +void set_config_map_reg(struct bus *link) { u32 tempreg; u32 i; + u32 ht_c_index = get_ht_c_index(link); + u32 linkn = link->link_num & 0x0f; + u32 busn_min = (link->secondary >> sysconf.segbit) & 0xff; + u32 busn_max = (link->subordinate >> sysconf.segbit) & 0xff; + u32 nodeid = amdfam10_nodeid(link->dev); - busn_min>>=segbit; - busn_max>>=segbit; + tempreg = ((nodeid & 0x30) << (12-4)) | ((nodeid & 0xf) << 4) | 3; + tempreg |= (busn_max << 24)|(busn_min << 16)|(linkn << 8); - tempreg = 3 | ((nodeid&0xf)<<4) | ((nodeid & 0x30)<<(12-4))|(linkn<<8)|((busn_min & 0xff)<<16)|((busn_max&0xff)<<24); - for (i=0; i<nodes; i++) { + for (i=0; i < sysconf.nodes; i++) { device_t dev = __f1_dev[i]; pci_write_config32(dev, 0xe0 + ht_c_index * 4, tempreg); } } -void clear_config_map_reg(u32 nodeid, u32 linkn, u32 ht_c_index, - u32 busn_min, u32 busn_max, u32 nodes) +void clear_config_map_reg(struct bus *link) { u32 i; + u32 ht_c_index = get_ht_c_index(link); - for (i=0; i<nodes; i++) { + for (i=0; i < sysconf.nodes; i++) { device_t dev = __f1_dev[i]; pci_write_config32(dev, 0xe0 + ht_c_index * 4, 0); } } -u32 get_ht_c_index(u32 nodeid, u32 linkn, sys_info_conf_t *sysinfo) +static u32 ht_c_key(struct bus *link) { - u32 tempreg; - u32 ht_c_index = 0; + u32 nodeid = amdfam10_nodeid(link->dev); + u32 linkn = link->link_num & 0x0f; + u32 val = (linkn << 8) | ((nodeid & 0x3f) << 2) | 3; + return val; +} -#if 0 - tempreg = 3 | ((nodeid & 0xf) <<4) | ((nodeid & 0x30)<<(12-4)) | (linkn<<8); +static u32 get_ht_c_index_by_key(u32 key, sys_info_conf_t *sysinfo) +{ + u32 ht_c_index = 0; - for (ht_c_index=0;ht_c_index<4; ht_c_index++) { - reg = pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 1), 0xe0 + ht_c_index * 4); - if (((reg & 0xffff) == 0x0000)) { /*found free*/ - break; - } - } -#endif - tempreg = 3 | ((nodeid & 0x3f)<<2) | (linkn<<8); for (ht_c_index=0; ht_c_index<32; ht_c_index++) { - if ((sysinfo->ht_c_conf_bus[ht_c_index] & 0xfff) == tempreg) { + if ((sysinfo->ht_c_conf_bus[ht_c_index] & 0xfff) == key) { return ht_c_index; } } @@ -108,14 +105,26 @@ u32 get_ht_c_index(u32 nodeid, u32 linkn, sys_info_conf_t *sysinfo) return -1; } -void store_ht_c_conf_bus(u32 nodeid, u32 linkn, u32 ht_c_index, - u32 busn_min, u32 busn_max, - sys_info_conf_t *sysinfo) +u32 get_ht_c_index(struct bus *link) { - u32 val; - val = 3 | ((nodeid & 0x3f)<<2) | (linkn<<8); - sysinfo->ht_c_conf_bus[ht_c_index] = val | ((busn_min & 0xff) <<12) | (busn_max<<20); // same node need segn are same + u32 val = ht_c_key(link); + return get_ht_c_index_by_key(val, &sysconf); +} + +void store_ht_c_conf_bus(struct bus *link) +{ + u32 val = ht_c_key(link); + u32 ht_c_index = get_ht_c_index_by_key(val, &sysconf); + + u32 segn = (link->subordinate >> 8) & 0x0f; + u32 busn_min = link->secondary & 0xff; + u32 busn_max = link->subordinate & 0xff; + + val |= (segn << 28) | (busn_max << 20) | (busn_min << 12); + sysconf.ht_c_conf_bus[ht_c_index] = val; + sysconf.hcdn_reg[ht_c_index] = link->hcdn_reg; + sysconf.ht_c_num++; } u32 get_io_addr_index(u32 nodeid, u32 linkn) diff --git a/src/northbridge/amd/amdfam10/ht_config.h b/src/northbridge/amd/amdfam10/ht_config.h index 08c5263..fcec368 100644 --- a/src/northbridge/amd/amdfam10/ht_config.h +++ b/src/northbridge/amd/amdfam10/ht_config.h @@ -20,6 +20,7 @@ typedef struct amdfam10_sysconf_t sys_info_conf_t; /* FIXME */ +u32 amdfam10_nodeid(device_t dev); extern device_t __f1_dev[]; struct dram_base_mask_t { @@ -29,17 +30,11 @@ struct dram_base_mask_t { struct dram_base_mask_t get_dram_base_mask(u32 nodeid); -void set_config_map_reg(u32 nodeid, u32 linkn, u32 ht_c_index, - u32 busn_min, u32 busn_max, u32 segbit, - u32 nodes); -void clear_config_map_reg(u32 nodeid, u32 linkn, u32 ht_c_index, - u32 busn_min, u32 busn_max, u32 nodes); +u32 get_ht_c_index(struct bus *link); +void store_ht_c_conf_bus(struct bus *link); -void store_ht_c_conf_bus(u32 nodeid, u32 linkn, u32 ht_c_index, - u32 busn_min, u32 busn_max, - sys_info_conf_t *sysinfo); - -u32 get_ht_c_index(u32 nodeid, u32 linkn, sys_info_conf_t *sysinfo); +void set_config_map_reg(struct bus *link); +void clear_config_map_reg(struct bus *link); void store_conf_io_addr(u32 nodeid, u32 linkn, u32 reg, u32 index, diff --git a/src/northbridge/amd/amdfam10/northbridge.c b/src/northbridge/amd/amdfam10/northbridge.c index 8eee64c..c3f7856 100644 --- a/src/northbridge/amd/amdfam10/northbridge.c +++ b/src/northbridge/amd/amdfam10/northbridge.c @@ -114,7 +114,7 @@ static void f1_write_config32(unsigned reg, u32 value) } } -static u32 amdfam10_nodeid(device_t dev) +u32 amdfam10_nodeid(device_t dev) { #if NODE_NUMS == 64 unsigned busn; @@ -197,7 +197,6 @@ static u32 amdfam10_scan_chain(device_t dev, u32 nodeid, struct bus *link, bool int i; unsigned int next_unitid; - u32 ht_c_index; u32 ht_unitid_base[4]; // here assume only 4 HT device on chain u32 max_devfn; @@ -209,9 +208,8 @@ static u32 amdfam10_scan_chain(device_t dev, u32 nodeid, struct bus *link, bool /* See if there is an available configuration space mapping * register in function 1. */ - ht_c_index = get_ht_c_index(nodeid, link->link_num, &sysconf); - - if(ht_c_index>=4) return max; + if (get_ht_c_index(link) >= 4) + return max; /* Set up the primary, secondary and subordinate bus numbers. * We have no idea how many busses are behind this bridge yet, @@ -239,8 +237,7 @@ static u32 amdfam10_scan_chain(device_t dev, u32 nodeid, struct bus *link, bool ht_route_link(link, HT_ROUTE_SCAN); /* set the config map space */ - - set_config_map_reg(nodeid, link->link_num, ht_c_index, link->secondary, link->subordinate, sysconf.segbit, sysconf.nodes); + set_config_map_reg(link); /* Now we can scan all of the subordinate busses i.e. the * chain on the hypertranport link @@ -265,20 +262,20 @@ static u32 amdfam10_scan_chain(device_t dev, u32 nodeid, struct bus *link, bool /* We know the number of busses behind this bridge. Set the * subordinate bus number to it's real value */ - set_config_map_reg(nodeid, link->link_num, ht_c_index, link->secondary, link->subordinate, sysconf.segbit, sysconf.nodes); - sysconf.ht_c_num++; + if (0) { + /* Clear the extend reg. */ + clear_config_map_reg(link); + } - { - // use ht_unitid_base to update hcdn_reg - u32 temp = 0; - for(i=0;i<4;i++) { - temp |= (ht_unitid_base[i] & 0xff) << (i*8); - } + set_config_map_reg(link); - sysconf.hcdn_reg[ht_c_index] = temp; + /* Use ht_unitid_base to update hcdn_reg. */ + link->hcdn_reg = 0; + for (i = 0; i < 4;i++) + link->hcdn_reg |= (ht_unitid_base[i] & 0xff) << (i*8); + + store_ht_c_conf_bus(link); - } - store_ht_c_conf_bus(nodeid, link->link_num, ht_c_index, link->secondary, link->subordinate, &sysconf); return link->subordinate; }

1 0

Patch set updated for coreboot: ff67255 AMD K8 fam10: Eliminate local variable min_bus
by Kyösti Mälkki June 1, 2015

June 1, 2015

Kyösti Mälkki (kyosti.malkki(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8364 -gerrit commit ff6725539ede47d0c1dcea62595cad9d6e52bef9 Author: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Date: Thu Feb 5 08:12:20 2015 +0200 AMD K8 fam10: Eliminate local variable min_bus Some cases of max==0xff wrapping around the 8-bit link->secondary register remain to be solved. Change-Id: I01e2ab6b2f23a03dbac49207ab584eccd1ca9b1f Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- src/northbridge/amd/amdfam10/northbridge.c | 19 +++++++------------ src/northbridge/amd/amdk8/northbridge.c | 16 +++++++--------- 2 files changed, 14 insertions(+), 21 deletions(-) diff --git a/src/northbridge/amd/amdfam10/northbridge.c b/src/northbridge/amd/amdfam10/northbridge.c index 68bf336..8eee64c 100644 --- a/src/northbridge/amd/amdfam10/northbridge.c +++ b/src/northbridge/amd/amdfam10/northbridge.c @@ -199,7 +199,6 @@ static u32 amdfam10_scan_chain(device_t dev, u32 nodeid, struct bus *link, bool unsigned int next_unitid; u32 ht_c_index; u32 ht_unitid_base[4]; // here assume only 4 HT device on chain - u32 min_bus; u32 max_devfn; /* Check for connected link. */ @@ -220,25 +219,21 @@ static u32 amdfam10_scan_chain(device_t dev, u32 nodeid, struct bus *link, bool */ if (CONFIG_SB_HT_CHAIN_ON_BUS0 == 0) { - min_bus = ++max; + max++; } else if (is_sblink) { - // first chain will on bus 0 - min_bus = max; /* actually max is 0 here */ + } else if (CONFIG_SB_HT_CHAIN_ON_BUS0 == 1) { - min_bus = ++max; + max++; } else if (CONFIG_SB_HT_CHAIN_ON_BUS0 > 1) { - // second chain will be on 0x40, third 0x80, forth 0xc0 - // i would refined that to 2, 3, 4 ==> 0, 0x, 40, 0x80, 0xc0 - // >4 will use more segments, // We can have 16 segmment and every segment have 256 bus, // For that case need the kernel support mmio pci config. /* One node can have 8 link and segn is the same. */ - min_bus = (((max & 0xff) >> 3) + 1) << 3; - max = min_bus; + max++; + max = ALIGN_UP(max, 8); } - link->secondary = min_bus; + link->secondary = max; link->subordinate = link->secondary; ht_route_link(link, HT_ROUTE_SCAN); @@ -255,7 +250,7 @@ static u32 amdfam10_scan_chain(device_t dev, u32 nodeid, struct bus *link, bool } //if ext conf is enabled, only need use 0x1f - if (min_bus == 0) + if (link->secondary == 0) max_devfn = (0x17<<3) | 7; else max_devfn = (0x1f<<3) | 7; diff --git a/src/northbridge/amd/amdk8/northbridge.c b/src/northbridge/amd/amdk8/northbridge.c index b27404e..7826749 100644 --- a/src/northbridge/amd/amdk8/northbridge.c +++ b/src/northbridge/amd/amdk8/northbridge.c @@ -141,7 +141,6 @@ static u32 amdk8_scan_chain(device_t dev, u32 nodeid, struct bus *link, bool is_ u32 config_busses; u32 free_reg, config_reg; u32 ht_unitid_base[4]; // here assume only 4 HT device on chain - u32 min_bus; u32 max_devfn; link->cap = 0x80 + (link->link_num * 0x20); @@ -180,19 +179,18 @@ static u32 amdk8_scan_chain(device_t dev, u32 nodeid, struct bus *link, bool is_ * so we set the subordinate bus number to 0xff for the moment. */ if (CONFIG_SB_HT_CHAIN_ON_BUS0 == 0) { - min_bus = ++max; + max++; } else if (is_sblink) { - // first chain will on bus 0 - min_bus = max; /* actually max is 0 here */ + } else if (CONFIG_SB_HT_CHAIN_ON_BUS0 == 1) { - min_bus = ++max; + max++; } else if (CONFIG_SB_HT_CHAIN_ON_BUS0 > 1) { /* Second chain will be on 0x40, third 0x80, forth 0xc0. */ - min_bus = (max & ~0x3f) + 0x40; - max = min_bus; + max++; + max = ALIGN_UP(max, 0x40); } - link->secondary = min_bus; + link->secondary = max; link->subordinate = link->secondary; ht_route_link(link, HT_ROUTE_SCAN); @@ -214,7 +212,7 @@ static u32 amdk8_scan_chain(device_t dev, u32 nodeid, struct bus *link, bool is_ ht_unitid_base[i] = 0x20; } - if (min_bus == 0) + if (link->secondary == 0) max_devfn = (0x17<<3) | 7; else max_devfn = (0x1f<<3) | 7;

1 0

Patch set updated for coreboot: 2132d8e asrock/fm2a88m-hdplus: add new mainboard [NOTREADYFORMERGE]
by Felix Held June 1, 2015

June 1, 2015

Felix Held (felix-coreboot(a)felixheld.de) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/9624 -gerrit commit 2132d8ea51559a8e11aead1025e0bac5faf8d641 Author: Felix Held <felix-coreboot(a)felixheld.de> Date: Mon Jun 1 01:12:35 2015 +0200 asrock/fm2a88m-hdplus: add new mainboard [NOTREADYFORMERGE] Thanks to Alec Ari for helping with the rebase on current master Change-Id: I44d239d34055deda4eb2f41e39b43a6579b4ec54 Signed-off-by: Felix Held <felix-coreboot(a)felixheld.de> --- src/mainboard/asrock/fm2a88m-hdplus/BiosCallOuts.c | 105 +++++ src/mainboard/asrock/fm2a88m-hdplus/Kconfig | 73 ++++ src/mainboard/asrock/fm2a88m-hdplus/Kconfig.name | 2 + src/mainboard/asrock/fm2a88m-hdplus/Makefile.inc | 26 ++ src/mainboard/asrock/fm2a88m-hdplus/OptionsIds.h | 63 +++ .../asrock/fm2a88m-hdplus/PlatformGnbPcie.c | 229 +++++++++++ .../asrock/fm2a88m-hdplus/acpi/AmdImc.asl | 97 +++++ .../asrock/fm2a88m-hdplus/acpi/cpstate.asl | 115 ++++++ src/mainboard/asrock/fm2a88m-hdplus/acpi/gpe.asl | 76 ++++ .../asrock/fm2a88m-hdplus/acpi/mainboard.asl | 36 ++ .../asrock/fm2a88m-hdplus/acpi/routing.asl | 252 ++++++++++++ src/mainboard/asrock/fm2a88m-hdplus/acpi/sata.asl | 20 + src/mainboard/asrock/fm2a88m-hdplus/acpi/si.asl | 26 ++ src/mainboard/asrock/fm2a88m-hdplus/acpi/sleep.asl | 100 +++++ .../asrock/fm2a88m-hdplus/acpi/superio.asl | 20 + .../asrock/fm2a88m-hdplus/acpi/thermal.asl | 20 + .../asrock/fm2a88m-hdplus/acpi/usb_oc.asl | 31 ++ src/mainboard/asrock/fm2a88m-hdplus/acpi_tables.c | 54 +++ src/mainboard/asrock/fm2a88m-hdplus/board_info.txt | 7 + src/mainboard/asrock/fm2a88m-hdplus/buildOpts.c | 449 +++++++++++++++++++++ src/mainboard/asrock/fm2a88m-hdplus/cmos.layout | 79 ++++ src/mainboard/asrock/fm2a88m-hdplus/devicetree.cb | 117 ++++++ src/mainboard/asrock/fm2a88m-hdplus/dsdt.asl | 92 +++++ src/mainboard/asrock/fm2a88m-hdplus/irq_tables.c | 107 +++++ src/mainboard/asrock/fm2a88m-hdplus/mainboard.c | 75 ++++ src/mainboard/asrock/fm2a88m-hdplus/mptable.c | 188 +++++++++ src/mainboard/asrock/fm2a88m-hdplus/romstage.c | 138 +++++++ 27 files changed, 2597 insertions(+) diff --git a/src/mainboard/asrock/fm2a88m-hdplus/BiosCallOuts.c b/src/mainboard/asrock/fm2a88m-hdplus/BiosCallOuts.c new file mode 100644 index 0000000..9d8bca5 --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/BiosCallOuts.c @@ -0,0 +1,105 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Felix Held <felix-coreboot(a)felixheld.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include "AGESA.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include "OptionsIds.h" + +#include <cbfs.h> +#include <vendorcode/amd/agesa/f15tn/Proc/Fch/FchPlatform.h> +#include <stdlib.h> + +static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr); + +const BIOS_CALLOUT_STRUCT BiosCallouts[] = +{ + {AGESA_DO_RESET, agesa_Reset }, + {AGESA_READ_SPD, agesa_ReadSpd }, + {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, + {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, + {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData }, + {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, + {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, + {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config }, + {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage } +}; +const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); + +/** + * ASRock FM2A88M-HD+ board ALC662 Verb Table + * + * Copied from `/sys/class/sound/hwC1D0/init_pin_configs` when running + * the vendor BIOS. + */ +const CODEC_ENTRY fm2a88m_hdplus_alc662_VerbTbl[] = { + {0x14, 0x01014010}, + {0x15, 0x40000000}, + {0x16, 0x411111f0}, + {0x18, 0x01a19040}, + {0x19, 0x02a19150}, + {0x1a, 0x0181304f}, + {0x1b, 0x02214120}, + {0x1c, 0x411111f0}, + {0x1d, 0x40a4c601}, + {0x1e, 0x411111f0}, + {0xff, 0xffffffff} +}; + +static const CODEC_TBL_LIST CodecTableList[] = +{ + {0x10ec0662, (CODEC_ENTRY*)&fm2a88m_hdplus_alc662_VerbTbl[0]}, + {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL} +}; + +/** + * Fch Oem setting callback + * + * Configure platform specific Hudson device, + * such Azalia, SATA, GEC, IMC etc. + */ +static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr) +{ + AMD_CONFIG_PARAMS *StdHeader = ConfigPtr; + + if (StdHeader->Func == AMD_INIT_RESET) { + FCH_RESET_DATA_BLOCK *FchParams_reset = (FCH_RESET_DATA_BLOCK *)FchData; + printk(BIOS_DEBUG, "Fch OEM config in INIT RESET "); + FchParams_reset->LegacyFree = IS_ENABLED(CONFIG_HUDSON_LEGACY_FREE); + FchParams_reset->FchReset.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); + FchParams_reset->FchReset.Xhci1Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); + } else if (StdHeader->Func == AMD_INIT_ENV) { + FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData; + printk(BIOS_DEBUG, "Fch OEM config in INIT ENV "); + + /* Azalia Controller OEM Codec Table Pointer */ + FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]); + /* Azalia Controller Front Panel OEM Table Pointer */ + FchParams_env->Imc.ImcEnable = FALSE; + FchParams_env->Hwm.HwMonitorEnable = FALSE; + FchParams_env->Hwm.HwmFchtsiAutoPoll = FALSE;/* 1 enable, 0 disable TSI Auto Polling */ + + /* XHCI configuration */ + FchParams_env->Usb.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); + FchParams_env->Usb.Xhci1Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); + } + printk(BIOS_DEBUG, "Done\n"); + + return AGESA_SUCCESS; +} diff --git a/src/mainboard/asrock/fm2a88m-hdplus/Kconfig b/src/mainboard/asrock/fm2a88m-hdplus/Kconfig new file mode 100644 index 0000000..88e65ab --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/Kconfig @@ -0,0 +1,73 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# Copyright (C) 2012 Rudolf Marek <r.marek(a)assembler.cz> +# Copyright (C) 2014 Felix Held <coreboot(a)felixheld.de> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc. +# + +if BOARD_ASROCK_FM2A88M_HDPLUS + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_AGESA_FAMILY15_TN + select NORTHBRIDGE_AMD_AGESA_FAMILY15_TN + select SOUTHBRIDGE_AMD_AGESA_BOLTON + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select HAVE_ACPI_TABLES + select SUPERIO_NUVOTON_NCT6776 + select BOARD_ROMSIZE_KB_8192 + select GFXUMA + select HUDSON_DISABLE_IMC + +#TODO: RAM and FCH voltage control + +config MAINBOARD_DIR + string + default asrock/fm2a88m-hdplus + +config MAINBOARD_PART_NUMBER + string + default "FM2A88M-HD+" + +config HW_MEM_HOLE_SIZEK + hex + default 0x200000 + +config MAX_CPUS + int + default 4 + +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n + +config IRQ_SLOT_COUNT + int + default 11 + +config ONBOARD_VGA_IS_PRIMARY + bool + default y + +#not sure about this +config VGA_BIOS_ID + string + default "1002,9993" + +endif # BOARD_ASROCK_FM2A88M_HDPLUS diff --git a/src/mainboard/asrock/fm2a88m-hdplus/Kconfig.name b/src/mainboard/asrock/fm2a88m-hdplus/Kconfig.name new file mode 100644 index 0000000..dbd3388 --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_ASROCK_FM2A88M_HDPLUS + bool "FM2A88M-HD+" diff --git a/src/mainboard/asrock/fm2a88m-hdplus/Makefile.inc b/src/mainboard/asrock/fm2a88m-hdplus/Makefile.inc new file mode 100644 index 0000000..0008d6d --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/Makefile.inc @@ -0,0 +1,26 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc. +# + +romstage-y += buildOpts.c +romstage-y += BiosCallOuts.c +romstage-y += PlatformGnbPcie.c + +ramstage-y += buildOpts.c +ramstage-y += BiosCallOuts.c +ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/asrock/fm2a88m-hdplus/OptionsIds.h b/src/mainboard/asrock/fm2a88m-hdplus/OptionsIds.h new file mode 100644 index 0000000..6354a62 --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/OptionsIds.h @@ -0,0 +1,63 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +/** + * @file + * + * IDS Option File + * + * This file is used to switch on/off IDS features. + * + */ +#ifndef _OPTION_IDS_H_ +#define _OPTION_IDS_H_ + +/** + * + * This file generates the defaults tables for the Integrated Debug Support + * Module. The documented build options are imported from a user controlled + * file for processing. The build options for the Integrated Debug Support + * Module are listed below: + * + * IDSOPT_IDS_ENABLED + * IDSOPT_ERROR_TRAP_ENABLED + * IDSOPT_CONTROL_ENABLED + * IDSOPT_TRACING_ENABLED + * IDSOPT_PERF_ANALYSIS + * IDSOPT_ASSERT_ENABLED + * IDS_DEBUG_PORT + * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + * + **/ + +//#define IDSOPT_IDS_ENABLED TRUE +//#define IDSOPT_CONTROL_ENABLED TRUE +#define IDSOPT_TRACING_ENABLED TRUE +#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE +//#define IDSOPT_PERF_ANALYSIS TRUE +#define IDSOPT_ASSERT_ENABLED TRUE +//#undef IDSOPT_DEBUG_ENABLED +//#define IDSOPT_DEBUG_ENABLED FALSE +//#undef IDSOPT_HOST_SIMNOW +//#define IDSOPT_HOST_SIMNOW FALSE +//#undef IDSOPT_HOST_HDT +//#define IDSOPT_HOST_HDT FALSE +//#define IDS_DEBUG_PORT 0x80 + +#endif diff --git a/src/mainboard/asrock/fm2a88m-hdplus/PlatformGnbPcie.c b/src/mainboard/asrock/fm2a88m-hdplus/PlatformGnbPcie.c new file mode 100644 index 0000000..20c6c0a --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/PlatformGnbPcie.c @@ -0,0 +1,229 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include "Porting.h" +#include "AGESA.h" +#include "amdlib.h" + +#include <northbridge/amd/agesa/agesawrapper.h> +#include <vendorcode/amd/agesa/f15tn/Proc/CPU/heapManager.h> + +#define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE + +/* + * Lane ID Mapping (from Fam15h BKDG: Table 45: Lane Id Mapping) + * + * Lane Id + * 0 P_UMI_[T,R]X[P,N]0 - southbridge link, connect via dev 8 + * 1 P_UMI_[T,R]X[P,N]1 - southbridge link, connect via dev 8 + * 2 P_UMI_[T,R]X[P,N]2 - southbridge link, connect via dev 8 + * 3 P_UMI_[T,R]X[P,N]3 - southbridge link, connect via dev 8 + * 4 P_GPP_[T,R]X[P,N]0 - may connect to PCI dev 4 - 7 + * 5 P_GPP_[T,R]X[P,N]1 - may connect to PCI dev 4 - 7 + * 6 P_GPP_[T,R]X[P,N]2 - may connect to PCI dev 4 - 7 + * 7 P_GPP_[T,R]X[P,N]3 - may connect to PCI dev 4 - 7 + * 8 P_GFX_[T,R]X[P,N]0 - may be used to form GFX slot or DDI + * 9 P_GFX_[T,R]X[P,N]1 - may be used to form GFX slot or DDI + * 10 P_GFX_[T,R]X[P,N]2 - may be used to form GFX slot or DDI + * 11 P_GFX_[T,R]X[P,N]3 - may be used to form GFX slot or DDI + * 12 P_GFX_[T,R]X[P,N]4 - may be used to form GFX slot or DDI + * 13 P_GFX_[T,R]X[P,N]5 - may be used to form GFX slot or DDI + * 14 P_GFX_[T,R]X[P,N]6 - may be used to form GFX slot or DDI + * 15 P_GFX_[T,R]X[P,N]7 - may be used to form GFX slot or DDI + * 16 P_GFX_[T,R]X[P,N]8 - may be used to form GFX slot or DDI + * 17 P_GFX_[T,R]X[P,N]9 - may be used to form GFX slot or DDI + * 18 P_GFX_[T,R]X[P,N]10 - may be used to form GFX slot or DDI + * 19 P_GFX_[T,R]X[P,N]11 - may be used to form GFX slot or DDI + * 20 P_GFX_[T,R]X[P,N]12 - may be used to form GFX slot or DDI + * 21 P_GFX_[T,R]X[P,N]13 - may be used to form GFX slot or DDI + * 22 P_GFX_[T,R]X[P,N]14 - may be used to form GFX slot or DDI + * 23 P_GFX_[T,R]X[P,N]15 - may be used to form GFX slot or DDI + * 24 DP0_TX[P,N]0 - rest is just for DDI (graphics outputs) + * 25 DP0_TX[P,N]1 + * 26 DP0_TX[P,N]2 + * 27 DP0_TX[P,N]3 + * 28 DP1_TX[P,N]0 + * 29 DP1_TX[P,N]1 + * 30 DP1_TX[P,N]2 + * 31 DP1_TX[P,N]3 + * 32 DP2_TX[P,N]0 + * 33 DP2_TX[P,N]1 + * 34 DP2_TX[P,N]2 + * 35 DP2_TX[P,N]3 + * 36 DP2_TX[P,N]4 + * 37 DP2_TX[P,N]5 + * 38 DP2_TX[P,N]6 + */ + +static const PCIe_PORT_DESCRIPTOR PortList [] = { + /* PCIe port, Lanes 8:23, PCI Device Number 2, x16 slot */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 8, 23), + PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 2, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmL0sL1, 1) + }, + /* PCIe port, Lane 4, PCI Device Number 4, x1 slot */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4), + PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 4, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmL0sL1, 1) + }, + /* PCIe port, Lane 5, PCI Device Number 5, ethernet (populated) */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5), + PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 5, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmL0sL1, 1) + }, + /* PCIe port, Lane 6, PCI Device Number 6, ethernet (unpopulated) */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6), + PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 6, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmL0sL1, 1) + }, + /* PCIe port, Lane 7, PCI Device Number 7, unused */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PcieUnusedEngine, 7, 7), + PCIE_PORT_DATA_INITIALIZER (PortDisabled, ChannelTypeExt6db, 7, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 1) + }, + /* PCIe port, Lanes 0:3, UMI link to SB, PCI Device Number 8 */ + { + DESCRIPTOR_TERMINATE_LIST, + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3), + PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 8, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmL0sL1, 0) + }, +}; + +/* + * It is not known, if the setup is complete. + * + * TODO: verify mappings. DP0 and DP1 might be swapped + * + * Tested and works: + * Untested: + */ +static const PCIe_DDI_DESCRIPTOR DdiList [] = { + // DP0 to HDMI0 + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 24, 27), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux1, Hdp1) + }, + // DP1 to FCH + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 28, 31), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeNutmegDpToVga, Aux2, Hdp2) + }, + // DP2 to dual link DVI + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 32, 38), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDualLinkDVI, Aux3, Hdp3) + }, +}; + +static const PCIe_COMPLEX_DESCRIPTOR Trinity = { + DESCRIPTOR_TERMINATE_LIST, + 0, + &PortList[0], + &DdiList[0] +}; + +/*---------------------------------------------------------------------------------------*/ +/** + * OemCustomizeInitEarly + * + * Description: + * This stub function will call the host environment through the binary block + * interface (call-out port) to provide a user hook opportunity + * + * Parameters: + * @param[in] *InitEarly + * + * @retval VOID + * + **/ +/*---------------------------------------------------------------------------------------*/ +static AGESA_STATUS OemInitEarly(AMD_EARLY_PARAMS * InitEarly) +{ + AGESA_STATUS Status; + VOID *TrinityPcieComplexListPtr; + VOID *TrinityPciePortPtr; + VOID *TrinityPcieDdiPtr; + + ALLOCATE_HEAP_PARAMS AllocHeapParams; + + // GNB PCIe topology Porting + + // + // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR + // + AllocHeapParams.RequestedBufferSize = sizeof(Trinity) + sizeof(PortList) + sizeof(DdiList); + AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; + AllocHeapParams.Persist = HEAP_LOCAL_CACHE; + Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); + ASSERT(Status == AGESA_SUCCESS); + + TrinityPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr; + + AllocHeapParams.BufferPtr += sizeof(Trinity); + TrinityPciePortPtr = (PCIe_PORT_DESCRIPTOR *)AllocHeapParams.BufferPtr; + + AllocHeapParams.BufferPtr += sizeof(PortList); + TrinityPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr; + + LibAmdMemFill (TrinityPcieComplexListPtr, + 0, + sizeof(Trinity), + &InitEarly->StdHeader); + + LibAmdMemFill (TrinityPciePortPtr, + 0, + sizeof(PortList), + &InitEarly->StdHeader); + + LibAmdMemFill (TrinityPcieDdiPtr, + 0, + sizeof(DdiList), + &InitEarly->StdHeader); + + LibAmdMemCopy (TrinityPcieComplexListPtr, &Trinity, sizeof(Trinity), &InitEarly->StdHeader); + LibAmdMemCopy (TrinityPciePortPtr, &PortList[0], sizeof(PortList), &InitEarly->StdHeader); + LibAmdMemCopy (TrinityPcieDdiPtr, &DdiList[0], sizeof(DdiList), &InitEarly->StdHeader); + + ((PCIe_COMPLEX_DESCRIPTOR*)TrinityPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)TrinityPciePortPtr; + ((PCIe_COMPLEX_DESCRIPTOR*)TrinityPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)TrinityPcieDdiPtr; + + InitEarly->GnbConfig.PcieComplexList = TrinityPcieComplexListPtr; + return AGESA_SUCCESS; +} + +static AGESA_STATUS OemInitMid(AMD_MID_PARAMS * InitMid) +{ + /* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */ + InitMid->GnbMidConfiguration.iGpuVgaMode = 0; + return AGESA_SUCCESS; +} + +const struct OEM_HOOK OemCustomize = { + .InitEarly = OemInitEarly, + .InitMid = OemInitMid, +}; + diff --git a/src/mainboard/asrock/fm2a88m-hdplus/acpi/AmdImc.asl b/src/mainboard/asrock/fm2a88m-hdplus/acpi/AmdImc.asl new file mode 100644 index 0000000..f55a12a --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/acpi/AmdImc.asl @@ -0,0 +1,97 @@ +//BTDC Due to IMC Fan, ACPI control codes +OperationRegion(IMIO, SystemIO, 0x3E, 0x02) +Field(IMIO , ByteAcc, NoLock, Preserve) { + IMCX,8, + IMCA,8 +} + +IndexField(IMCX, IMCA, ByteAcc, NoLock, Preserve) { + Offset(0x80), + MSTI, 8, + MITS, 8, + MRG0, 8, + MRG1, 8, + MRG2, 8, + MRG3, 8, +} + +Method(WACK, 0) +{ + Store(0, Local0) + Store(50, Local1) + While (LAnd (LNotEqual(Local0, 0xFA), LGreater(Local1,0))) { + Store(MRG0, Local0) + Sleep(10) + Decrement(Local1) + } +} + +//Init +Method (ITZE, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(0, MRG1) + Store(0, MRG2) + Store(0x80, MSTI) + WACK() + + Or(MRG2, 0x01, Local0) + + Store(0, MRG0) + Store(0, MRG1) + Store(Local0, MRG2) + Store(0x81, MSTI) + WACK() +} + +//Sleep +Method (IMSP, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(1, MRG1) + Store(0, MRG2) + Store(0x98, MSTI) + WACK() + + Store(0, MRG0) + Store(0xB4, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() +} + +//Wake +Method (IMWK, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(0, MRG1) + Store(0, MRG2) + Store(0x80, MSTI) + WACK() + + Or(MRG2, 0x01, Local0) + + Store(0, MRG0) + Store(0, MRG1) + Store(Local0, MRG2) + Store(0x81, MSTI) + WACK() +} diff --git a/src/mainboard/asrock/fm2a88m-hdplus/acpi/cpstate.asl b/src/mainboard/asrock/fm2a88m-hdplus/acpi/cpstate.asl new file mode 100644 index 0000000..dc543ee --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/acpi/cpstate.asl @@ -0,0 +1,115 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +/* This file defines the processor and performance state capability + * for each core in the system. It is included into the DSDT for each + * core. It assumes that each core of the system has the same performance + * characteristics. +*/ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) + { + Scope (\_PR) { + Processor(CPU0,0,0x808,0x06) { + #include "cpstate.asl" + } + Processor(CPU1,1,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU2,2,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU3,3,0x0,0x0) { + #include "cpstate.asl" + } + } +*/ + /* P-state support: The maximum number of P-states supported by the */ + /* CPUs we'll use is 6. */ + /* Get from AMI BIOS. */ + Name(_PSS, Package(){ + Package() + { + 0x00000D48, + 0x00011170, + 0x00000004, + 0x00000004, + 0x00000000, + 0x00000000 + }, + + Package() + { + 0x00000AF0, + 0x0000C544, + 0x00000004, + 0x00000004, + 0x00000001, + 0x00000001 + }, + + Package() + { + 0x000009C4, + 0x0000B3B0, + 0x00000004, + 0x00000004, + 0x00000002, + 0x00000002 + }, + + Package() + { + 0x00000898, + 0x0000ABE0, + 0x00000004, + 0x00000004, + 0x00000003, + 0x00000003 + }, + + Package() + { + 0x00000708, + 0x0000A410, + 0x00000004, + 0x00000004, + 0x00000004, + 0x00000004 + }, + + Package() + { + 0x00000578, + 0x00006F54, + 0x00000004, + 0x00000004, + 0x00000005, + 0x00000005 + } + }) + + Name(_PCT, Package(){ + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} + }) + + Method(_PPC, 0){ + Return(0) + } diff --git a/src/mainboard/asrock/fm2a88m-hdplus/acpi/gpe.asl b/src/mainboard/asrock/fm2a88m-hdplus/acpi/gpe.asl new file mode 100644 index 0000000..c755521 --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/acpi/gpe.asl @@ -0,0 +1,76 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +Scope(\_GPE) { /* Start Scope GPE */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\\_GPE\\_L00\n") */ + Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\\_GPE\\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\\_GPE\\_L09\n") */ + /* Notify (\_TZ.TZ00, 0x80) */ + } + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\\_GPE\\_L0B\n") */ + Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\\_GPE\\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\\_GPE\\_L11\n") */ + } + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\\_GPE\\_L18\n") */ + Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\\_GPE\\_L1B\n") */ + Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } +} /* End Scope GPE */ diff --git a/src/mainboard/asrock/fm2a88m-hdplus/acpi/mainboard.asl b/src/mainboard/asrock/fm2a88m-hdplus/acpi/mainboard.asl new file mode 100644 index 0000000..64b83b7 --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/acpi/mainboard.asl @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ + Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + + /* Some global data */ + Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ + Name(OSV, Ones) /* Assume nothing */ + Name(PMOD, One) /* Assume APIC */ diff --git a/src/mainboard/asrock/fm2a88m-hdplus/acpi/routing.asl b/src/mainboard/asrock/fm2a88m-hdplus/acpi/routing.asl new file mode 100644 index 0000000..ef8a854 --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/acpi/routing.asl @@ -0,0 +1,252 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + + /* Routing is in System Bus scope */ + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - F15 Host Controller */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ + Package(){0x0001FFFF, 0, INTB, 0 }, + Package(){0x0001FFFF, 1, INTC, 0 }, + + /* Bus 0, Dev 2 - PCIe Bridge for x16 slot */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + + /* Bus 0, Dev 4 - PCIe Bridge for x1 slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + + /* Bus 0, Dev 5 - PCIe Bridge for populated Ethernet Chip */ + Package(){0x0005FFFF, 0, INTB, 0 }, + Package(){0x0005FFFF, 1, INTC, 0 }, + Package(){0x0005FFFF, 2, INTD, 0 }, + Package(){0x0005FFFF, 3, INTA, 0 }, + + /* Bus 0, Dev 6 - PCIe Bridge for unpopulated Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + + /* Bus 0, Dev 7 - unused PCIe Bridge */ + /* Bus 0, Dev 8 - Southbridge port (normally hidden) */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + + /* Bus 0, Dev 18,19,22 - USB: OHCI @ func 0 + * EHCI @ func 2 */ + Package(){0x0012FFFF, 0, INTC, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + + Package(){0x0016FFFF, 0, INTC, 0 }, + Package(){0x0016FFFF, 1, INTB, 0 }, + + /* SB devices */ + /* Bus 0, Dev 16 - USB: XHCI func 0, 1 */ + Package(){0x0010FFFF, 0, INTC, 0 }, + Package(){0x0010FFFF, 1, INTB, 0 }, + + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, INTD, 0 }, + + /* Bus 0, Dev 21 Pcie Bridge */ + Package(){0x0015FFFF, 0, INTA, 0 }, + Package(){0x0015FFFF, 1, INTB, 0 }, + Package(){0x0015FFFF, 2, INTC, 0 }, + Package(){0x0015FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - F15 Host Controller */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ + Package(){0x0001FFFF, 0, 0, 17 }, + Package(){0x0001FFFF, 1, 0, 18 }, + + /* Bus 0, Dev 2 - PCIe Bridge for x16 PCIe Slot */ + Package(){0x0002FFFF, 0, 0, 18 }, + Package(){0x0002FFFF, 1, 0, 19 }, + Package(){0x0002FFFF, 2, 0, 16 }, + Package(){0x0002FFFF, 3, 0, 17 }, + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + + /* Bus 0, Dev 4 - PCIe Bridge for x1 slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + Package(){0x0004FFFF, 1, 0, 17 }, + Package(){0x0004FFFF, 2, 0, 18 }, + Package(){0x0004FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 5 - PCIe Bridge for populated Ethernet Chip */ + Package(){0x0005FFFF, 0, 0, 17 }, + Package(){0x0005FFFF, 1, 0, 18 }, + Package(){0x0005FFFF, 2, 0, 19 }, + Package(){0x0005FFFF, 3, 0, 16 }, + + /* Bus 0, Dev 6 - PCIe Bridge for unpopulated Ethernet Chip */ + Package(){0x0006FFFF, 0, 0, 18 }, + Package(){0x0006FFFF, 1, 0, 19 }, + Package(){0x0006FFFF, 2, 0, 16 }, + Package(){0x0006FFFF, 3, 0, 17 }, + + /* Bus 0, Dev 7 - unused PCIe Bridge */ + /* Bus 0, Dev 8 - Southbridge port (normally hidden) */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + + /* SB devices in APIC mode */ + /* Bus 0, Dev 18,19,22 - USB: OHCI @ func 0 + * EHCI @ func 2 */ + Package(){0x0012FFFF, 0, 0, 18 }, + Package(){0x0012FFFF, 1, 0, 17 }, + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 17 }, + + Package(){0x0016FFFF, 0, 0, 18 }, + Package(){0x0016FFFF, 1, 0, 17 }, + + /* Bus 0, Dev 16 - USB: XHCI func 0, 1 */ + Package(){0x0010FFFF, 0, 0, 0x12}, + Package(){0x0010FFFF, 1, 0, 0x11}, + + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 21 PCIE Bridge */ + Package(){0x0015FFFF, 0, 0, 17 }, + Package(){0x0015FFFF, 1, 0, 18 }, + Package(){0x0015FFFF, 2, 0, 19 }, + Package(){0x0015FFFF, 3, 0, 16 }, + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + /* PCIe x1 slot */ + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + /* populated ethernet chip */ + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + /* unpopulated ethernet chip */ + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + /* inactive PCIe port. fix AGESA to be able to remove this */ + Name(PS7, Package(){ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APS7, Package(){ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + /* SB PCI Bridge */ + Name(PCIB, Package(){ + /* PCI slots: slot 0 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 0x14 }, + Package(){0x0005FFFF, 1, 0, 0x15 }, + Package(){0x0005FFFF, 2, 0, 0x16 }, + Package(){0x0005FFFF, 3, 0, 0x17 }, + }) diff --git a/src/mainboard/asrock/fm2a88m-hdplus/acpi/sata.asl b/src/mainboard/asrock/fm2a88m-hdplus/acpi/sata.asl new file mode 100644 index 0000000..bbd95d8 --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/acpi/sata.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +/* No SATA functionality */ diff --git a/src/mainboard/asrock/fm2a88m-hdplus/acpi/si.asl b/src/mainboard/asrock/fm2a88m-hdplus/acpi/si.asl new file mode 100644 index 0000000..28cf633 --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/acpi/si.asl @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + Scope(\_SI) { + Method(_SST, 1) { + /* DBGO("\\_SI\\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ diff --git a/src/mainboard/asrock/fm2a88m-hdplus/acpi/sleep.asl b/src/mainboard/asrock/fm2a88m-hdplus/acpi/sleep.asl new file mode 100644 index 0000000..0c2fcb8 --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/acpi/sleep.asl @@ -0,0 +1,100 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +/* Wake status package */ +Name(WKST,Package(){Zero, Zero}) + +/* +* \_PTS - Prepare to Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2, etc +* +* Exit: +* -none- +* +* The _PTS control method is executed at the beginning of the sleep process +* for S1-S5. The sleeping value is passed to the _PTS control method. This +* control method may be executed a relatively long time before entering the +* sleep state and the OS may abort the operation without notification to +* the ACPI driver. This method cannot modify the configuration or power +* state of any device in the system. +*/ +Method(\_PTS, 1) { + /* DBGO("\\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(\_SB.SBRI, 0x13)) { + * Store(0,\_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + + Store (0x07, UPWS) +} /* End Method(\_PTS) */ + +/* +* \_BFS OEM Back From Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* -none- +*/ +Method(\_BFS, 1) { + /* DBGO("\\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ +} + +/* +* \_WAK System Wake method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* Return package of 2 DWords +* Dword 1 - Status +* 0x00000000 wake succeeded +* 0x00000001 Wake was signaled but failed due to lack of power +* 0x00000002 Wake was signaled but failed due to thermal condition +* Dword 2 - Power Supply state +* if non-zero the effective S-state the power supply entered +*/ +Method(\_WAK, 1) { + /* DBGO("\\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + Return(WKST) +} /* End Method(\_WAK) */ diff --git a/src/mainboard/asrock/fm2a88m-hdplus/acpi/superio.asl b/src/mainboard/asrock/fm2a88m-hdplus/acpi/superio.asl new file mode 100644 index 0000000..97304f9 --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/acpi/superio.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +/* No Super I/O device or functionality yet */ diff --git a/src/mainboard/asrock/fm2a88m-hdplus/acpi/thermal.asl b/src/mainboard/asrock/fm2a88m-hdplus/acpi/thermal.asl new file mode 100644 index 0000000..4c24d96 --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/acpi/thermal.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +/* No thermal zone functionality */ diff --git a/src/mainboard/asrock/fm2a88m-hdplus/acpi/usb_oc.asl b/src/mainboard/asrock/fm2a88m-hdplus/acpi/usb_oc.asl new file mode 100644 index 0000000..74691ad --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/acpi/usb_oc.asl @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +/* USB overcurrent mapping pins. */ +Name(UOM0, 0) +Name(UOM1, 2) +Name(UOM2, 0) +Name(UOM3, 7) +Name(UOM4, 2) +Name(UOM5, 2) +Name(UOM6, 6) +Name(UOM7, 2) +Name(UOM8, 6) +Name(UOM9, 6) diff --git a/src/mainboard/asrock/fm2a88m-hdplus/acpi_tables.c b/src/mainboard/asrock/fm2a88m-hdplus/acpi_tables.c new file mode 100644 index 0000000..50e3be3 --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/acpi_tables.c @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <northbridge/amd/agesa/agesawrapper.h> + +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/ioapic.h> +#include <console/console.h> +#include <cpu/amd/amdfam15.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write Hudson IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS, + IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1); + /* 1: LINT1 connect to NMI */ + + return current; +} diff --git a/src/mainboard/asrock/fm2a88m-hdplus/board_info.txt b/src/mainboard/asrock/fm2a88m-hdplus/board_info.txt new file mode 100644 index 0000000..1b2b6b9 --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/board_info.txt @@ -0,0 +1,7 @@ +Category: desktop +Board URL: http://www.asrock.com/mb/AMD/FM2A88M-HD+/ +ROM package: DIP8 +ROM protocol: [http://www.winbond-usa.com/hq/enu/ProductAndSales/ProductLines/FlashMemory/… SPI] +ROM socketed: y +Flashrom support: y +Release year: 2013 diff --git a/src/mainboard/asrock/fm2a88m-hdplus/buildOpts.c b/src/mainboard/asrock/fm2a88m-hdplus/buildOpts.c new file mode 100644 index 0000000..ebba700 --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/buildOpts.c @@ -0,0 +1,449 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +/** + * @file + * + * AMD User options selection for a Brazos platform solution system + * + * This file is placed in the user's platform directory and contains the + * build option selections desired for that platform. + * + * For Information about this file, see @ref platforminstall. + * + */ + +#include <stdlib.h> + +#include <vendorcode/amd/agesa/f15tn/AGESA.h> + +/* Include the files that instantiate the configuration definitions. */ +#include <vendorcode/amd/agesa/f15tn/Include/AdvancedApi.h> +#include <vendorcode/amd/agesa/f15tn/Include/CommonReturns.h> +#include <vendorcode/amd/agesa/f15tn/Proc/CPU/cpuFamilyTranslation.h> +#include <vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuFeatures.h> +#include <vendorcode/amd/agesa/f15tn/Proc/CPU/heapManager.h> +/* the next two headers depend on heapManager.h */ +#include <vendorcode/amd/agesa/f15tn/Proc/Common/CreateStruct.h> +#include <vendorcode/amd/agesa/f15tn/Proc/CPU/cpuEarlyInit.h> +/* These tables are optional and may be used to adjust memory timing settings */ +#include <vendorcode/amd/agesa/f15tn/Proc/Mem/mm.h> +#include <vendorcode/amd/agesa/f15tn/Proc/Mem/mn.h> + +#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE + +/* Select the cpu family. */ +#define INSTALL_FAMILY_10_SUPPORT FALSE +#define INSTALL_FAMILY_12_SUPPORT FALSE +#define INSTALL_FAMILY_14_SUPPORT FALSE +#define INSTALL_FAMILY_15_MODEL_1x_SUPPORT TRUE + +/* Select the cpu socket type. */ +#define INSTALL_G34_SOCKET_SUPPORT FALSE +#define INSTALL_C32_SOCKET_SUPPORT FALSE +#define INSTALL_S1G3_SOCKET_SUPPORT FALSE +#define INSTALL_S1G4_SOCKET_SUPPORT FALSE +#define INSTALL_ASB2_SOCKET_SUPPORT FALSE +#define INSTALL_FS1_SOCKET_SUPPORT FALSE +#define INSTALL_FM1_SOCKET_SUPPORT FALSE +#define INSTALL_FP2_SOCKET_SUPPORT FALSE +#define INSTALL_FT1_SOCKET_SUPPORT FALSE +#define INSTALL_AM3_SOCKET_SUPPORT FALSE + +#define INSTALL_FM2_SOCKET_SUPPORT TRUE + +//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_SODIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_ECC_SUPPORT TRUE +//#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE +//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE +#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE +#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE +#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE +//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE +#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE +//#define BLDOPT_REMOVE_ACPI_PSTATES FALSE +#define BLDOPT_REMOVE_SRAT FALSE //TRUE +#define BLDOPT_REMOVE_SLIT FALSE //TRUE +#define BLDOPT_REMOVE_WHEA FALSE //TRUE +#define BLDOPT_REMOVE_CRAT TRUE +#define BLDOPT_REMOVE_DMI TRUE +//#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE + +//This element selects whether P-States should be forced to be independent, +// as reported by the ACPI _PSD object. For single-link processors, +// setting TRUE for OS to support this feature. + +//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT TRUE + +#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER +/* Build configuration values here. + */ +#define BLDCFG_VRM_CURRENT_LIMIT 90000 +#define BLDCFG_VRM_LOW_POWER_THRESHOLD 0 +#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT 0 +#define BLDCFG_PLAT_NUM_IO_APICS 3 +#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST +#define BLDCFG_MEM_INIT_PSTATE 0 + +#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_DESKTOP + +#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1866_FREQUENCY +#define BLDCFG_MEMORY_MODE_UNGANGED TRUE +#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE +#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE +#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_SODIMM_CAPABLE FALSE +#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE +#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE +#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE +#define BLDCFG_MEMORY_POWER_DOWN TRUE +#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT +#define BLDCFG_ONLINE_SPARE FALSE +#define BLDCFG_BANK_SWIZZLE TRUE +#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO +#define BLDCFG_MEMORY_CLOCK_SELECT DDR1866_FREQUENCY +#define BLDCFG_DQS_TRAINING_CONTROL TRUE +#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE +#define BLDCFG_USE_BURST_MODE FALSE +#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE +#define BLDCFG_ENABLE_ECC_FEATURE FALSE +#define BLDCFG_ECC_REDIRECTION FALSE +#define BLDCFG_SCRUB_DRAM_RATE 0 +#define BLDCFG_SCRUB_L2_RATE 0 +#define BLDCFG_SCRUB_L3_RATE 0 +#define BLDCFG_SCRUB_IC_RATE 0 +#define BLDCFG_SCRUB_DC_RATE 0 +#define BLDCFG_ECC_SYMBOL_SIZE 4 +#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 +#define BLDCFG_ECC_SYNC_FLOOD FALSE +#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE +#define BLDCFG_1GB_ALIGN FALSE +#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE +#define BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM 36 // PCIE Spread Spectrum default value 0.36% +#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x1770 + +#define BLDOPT_REMOVE_ALIB FALSE +#define BLDCFG_PLATFORM_CPB_MODE CpbModeDisabled +#define BLDCFG_PROCESSOR_SCOPE_NAME0 'P' +#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' +#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 + +#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 200 +#define BLDCFG_CFG_ABM_SUPPORT 0 + +//#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x1770 + +// Specify the default values for the VRM controlling the VDDNB plane. +// If not specified, the values used for the core VRM will be applied +//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 // Not currently used on Trinity +//#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 // Zero - disable NBPSI_L, Non-zero - enable NBPSI_L +//#define BLDCFG_VRM_NB_SLEW_RATE 5000 // Used in calculating the VSRampSlamTime +//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 // Not currently used on Trinity +//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE 0 // Not currently used on Trinity +//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 // Not currently used on Trinity + +#define BLDCFG_VRM_NB_CURRENT_LIMIT 60000 + +#define BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON 3 +#define BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL 3 + +#if CONFIG_GFXUMA +#define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED +#define BLDCFG_UMA_ALLOCATION_MODE UMA_SPECIFIED +//#define BLDCFG_UMA_ALLOCATION_SIZE 0x1000//0x1800//0x1000 /* (1000 << 16) = 256M*/ +#define BLDCFG_UMA_ALLOCATION_SIZE 0x2000//512M +#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE +#endif + +#define BLDCFG_IOMMU_SUPPORT FALSE + +#define BLDCFG_CFG_GNB_HD_AUDIO TRUE +//#define BLDCFG_IGPU_SUBSYSTEM_ID OEM_IGPU_SSID +//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID OEM_IGPU_HD_AUDIO_SSID +//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID OEM_APU_PCIE_PORTS_SSID + +/* Process the options... + * This file include MUST occur AFTER the user option selection settings + */ +#define AGESA_ENTRY_INIT_RESET TRUE +#define AGESA_ENTRY_INIT_RECOVERY FALSE +#define AGESA_ENTRY_INIT_EARLY TRUE +#define AGESA_ENTRY_INIT_POST TRUE +#define AGESA_ENTRY_INIT_ENV TRUE +#define AGESA_ENTRY_INIT_MID TRUE +#define AGESA_ENTRY_INIT_LATE TRUE +#define AGESA_ENTRY_INIT_S3SAVE TRUE +#define AGESA_ENTRY_INIT_RESUME TRUE //TRUE +#define AGESA_ENTRY_INIT_LATE_RESTORE TRUE +#define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE +/* + * Customized OEM build configurations for FCH component + */ +// #define BLDCFG_SMBUS0_BASE_ADDRESS 0xB00 +// #define BLDCFG_SMBUS1_BASE_ADDRESS 0xB20 +// #define BLDCFG_SIO_PME_BASE_ADDRESS 0xE00 +// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400 +// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404 +// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS 0x408 +// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410 +// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS 0x420 +// #define BLDCFG_SPI_BASE_ADDRESS 0xFEC10000 +// #define BLDCFG_WATCHDOG_TIMER_BASE 0xFEC00000 +// #define BLDCFG_HPET_BASE_ADDRESS 0xFED00000 +// #define BLDCFG_SMI_CMD_PORT_ADDRESS 0xB0 +// #define BLDCFG_ACPI_PMA_BLK_ADDRESS 0xFE00 +// #define BLDCFG_ROM_BASE_ADDRESS 0xFED61000 +// #define BLDCFG_AZALIA_SSID 0x780D1022 +// #define BLDCFG_SMBUS_SSID 0x780B1022 +// #define BLDCFG_IDE_SSID 0x780C1022 +// #define BLDCFG_SATA_AHCI_SSID 0x78011022 +// #define BLDCFG_SATA_IDE_SSID 0x78001022 +// #define BLDCFG_SATA_RAID5_SSID 0x78031022 +// #define BLDCFG_SATA_RAID_SSID 0x78021022 +// #define BLDCFG_EHCI_SSID 0x78081022 +// #define BLDCFG_OHCI_SSID 0x78071022 +// #define BLDCFG_LPC_SSID 0x780E1022 +// #define BLDCFG_SD_SSID 0x78061022 +// #define BLDCFG_XHCI_SSID 0x78121022 +// #define BLDCFG_FCH_PORT80_BEHIND_PCIB FALSE +// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE +// #define BLDCFG_FCH_GPP_LINK_CONFIG PortA4 +// #define BLDCFG_FCH_GPP_PORT0_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT1_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT2_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT3_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG FALSE + +CONST AP_MTRR_SETTINGS ROMDATA TrinityApMtrrSettingsList[] = +{ + { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E }, + { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E }, + { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 }, + { CPU_LIST_TERMINAL } +}; + +#define BLDCFG_AP_MTRR_SETTINGS_LIST &TrinityApMtrrSettingsList + + // This is the delivery package title, "BrazosPI" + // This string MUST be exactly 8 characters long +#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} + + // This is the release version number of the AGESA component + // This string MUST be exactly 12 characters long +#define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '} + +/* MEMORY_BUS_SPEED */ +#define DDR400_FREQUENCY 200 ///< DDR 400 +#define DDR533_FREQUENCY 266 ///< DDR 533 +#define DDR667_FREQUENCY 333 ///< DDR 667 +#define DDR800_FREQUENCY 400 ///< DDR 800 +#define DDR1066_FREQUENCY 533 ///< DDR 1066 +#define DDR1333_FREQUENCY 667 ///< DDR 1333 +#define DDR1600_FREQUENCY 800 ///< DDR 1600 +#define DDR1866_FREQUENCY 933 ///< DDR 1866 +#define DDR2100_FREQUENCY 1050 ///< DDR 2100 +#define DDR2133_FREQUENCY 1066 ///< DDR 2133 +#define DDR2400_FREQUENCY 1200 ///< DDR 2400 +#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency + +/* QUANDRANK_TYPE*/ +#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM +#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM + +/* USER_MEMORY_TIMING_MODE */ +#define TIMING_MODE_AUTO 0 ///< Use best rate possible +#define TIMING_MODE_LIMITED 1 ///< Set user top limit +#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed + +/* POWER_DOWN_MODE */ +#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode +#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode + +/* + * Agesa optional capabilities selection. + * Uncomment and mark FALSE those features you wish to include in the build. + * Comment out or mark TRUE those features you want to REMOVE from the build. + */ + +#define DFLT_SMBUS0_BASE_ADDRESS 0xB00 +#define DFLT_SMBUS1_BASE_ADDRESS 0xB20 +/* The AGESA likes to enable 512 bytes region on this base for LPC bus */ +#define DFLT_SIO_PME_BASE_ADDRESS 0xE00 +#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800 +#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804 +#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x808 +#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x810 +#define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x820 +#define DFLT_SPI_BASE_ADDRESS 0xFEC10000 +#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0 +#define DFLT_HPET_BASE_ADDRESS 0xFED00000 +#define DFLT_SMI_CMD_PORT 0xB0 +#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00 +#define DFLT_GEC_BASE_ADDRESS 0xFED61000 +#define DFLT_AZALIA_SSID 0x780D1022 +#define DFLT_SMBUS_SSID 0x780B1022 +#define DFLT_IDE_SSID 0x780C1022 +#define DFLT_SATA_AHCI_SSID 0x78011022 +#define DFLT_SATA_IDE_SSID 0x78001022 +#define DFLT_SATA_RAID5_SSID 0x78031022 +#define DFLT_SATA_RAID_SSID 0x78021022 +#define DFLT_EHCI_SSID 0x78081022 +#define DFLT_OHCI_SSID 0x78071022 +#define DFLT_LPC_SSID 0x780E1022 +#define DFLT_SD_SSID 0x78061022 +#define DFLT_XHCI_SSID 0x78121022 +#define DFLT_FCH_PORT80_BEHIND_PCIB FALSE +#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE +#define DFLT_FCH_GPP_LINK_CONFIG PortA1B1C1D1 +#define DFLT_FCH_GPP_PORT0_PRESENT FALSE +#define DFLT_FCH_GPP_PORT1_PRESENT FALSE +#define DFLT_FCH_GPP_PORT2_PRESENT FALSE +#define DFLT_FCH_GPP_PORT3_PRESENT FALSE +#define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE +//#define BLDCFG_IR_PIN_CONTROL 0x33 +//#define FCH_NO_XHCI_SUPPORT FALSE +GPIO_CONTROL fm2a88m_hdplus_gpio[] = { +// {183, Function1, PullUpB}, + {-1} +}; +#define BLDCFG_FCH_GPIO_CONTROL_LIST (&fm2a88m_hdplus_gpio[0]) + +// The following definitions specify the default values for various parameters in which there are +// no clearly defined defaults to be used in the common file. The values below are based on product +// and BKDG content, please consult the AGESA Memory team for consultation. +#define DFLT_SCRUB_DRAM_RATE (0) +#define DFLT_SCRUB_L2_RATE (0) +#define DFLT_SCRUB_L3_RATE (0) +#define DFLT_SCRUB_IC_RATE (0) +#define DFLT_SCRUB_DC_RATE (0) +#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define DFLT_VRM_SLEW_RATE (5000) + +/* Moving this include up will break AGESA. */ +#include <vendorcode/amd/agesa/f15tn/Include/PlatformInstall.h> + +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + // + // The following macros are supported (use comma to separate macros): + // + // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) + // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. + // AGESA will base on this value to disable unused MemClk to save power. + // Example: + // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: + // Bit AM3/S1g3 pin name + // 0 M[B,A]_CLK_H/L[0] + // 1 M[B,A]_CLK_H/L[1] + // 2 M[B,A]_CLK_H/L[2] + // 3 M[B,A]_CLK_H/L[3] + // 4 M[B,A]_CLK_H/L[4] + // 5 M[B,A]_CLK_H/L[5] + // 6 M[B,A]_CLK_H/L[6] + // 7 M[B,A]_CLK_H/L[7] + // And platform has the following routing: + // CS0 M[B,A]_CLK_H/L[4] + // CS1 M[B,A]_CLK_H/L[2] + // CS2 M[B,A]_CLK_H/L[3] + // CS3 M[B,A]_CLK_H/L[5] + // Then platform can specify the following macro: + // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) + // + // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) + // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. + // AGESA will base on this value to tristate unused CKE to save power. + // + // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) + // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. + // AGESA will base on this value to tristate unused ODT pins to save power. + // + // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) + // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. + // AGESA will base on this value to tristate unused Chip select to save power. + // + // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) + // Specifies the number of DIMM slots per channel. + // + // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) + // Specifies the number of Chip selects per channel. + // + // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) + // Specifies the number of channels per socket. + // + // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) + // Specifies DDR bus speed of channel ChannelID on socket SocketID. + // + // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) + // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) + // + // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, + // Byte6Seed, Byte7Seed, ByteEccSeed) + // Specifies the write leveling seed for a channel of a socket. + // + // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, + // Byte6Seed, Byte7Seed, ByteEccSeed) + // Speicifes the HW RXEN training seed for a channel of a socket + // + + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2), +/* + TODO: is this OK for DDR3 socket FM2? + MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A), + ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00), + CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + */ + PSO_END +}; + diff --git a/src/mainboard/asrock/fm2a88m-hdplus/cmos.layout b/src/mainboard/asrock/fm2a88m-hdplus/cmos.layout new file mode 100644 index 0000000..50750a8 --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/cmos.layout @@ -0,0 +1,79 @@ +#***************************************************************************** +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc. +#***************************************************************************** + +entries + +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +456 1 e 1 ECC_memory +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/asrock/fm2a88m-hdplus/devicetree.cb b/src/mainboard/asrock/fm2a88m-hdplus/devicetree.cb new file mode 100644 index 0000000..7f428ff --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/devicetree.cb @@ -0,0 +1,117 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# Copyright (C) 2014 Felix Held <felix-coreboot(a)felixheld.de> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc. +# +chip northbridge/amd/agesa/family15rl/root_complex + + device cpu_cluster 0 on + chip cpu/amd/agesa/family15rl + device lapic 10 on end + end + end + + device domain 0 on + subsystemid 0x1022 0x1410 inherit + chip northbridge/amd/agesa/family15rl # CPU side of HT root complex + + chip northbridge/amd/agesa/family15rl # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 0.2 on end # IOMMU + device pci 1.0 on end # Internal Graphics P2P bridge 0x99XX + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # PCIe x16 slot (Gfx0 root port) + device pci 3.0 off end # unused (no Gfx1 root port) + device pci 4.0 on end # PCIe x1 slot (GPP0 root port on APU) + device pci 5.0 on end # ethernet (populated) (GPP1 root port on APU) + device pci 6.0 on end # ethernet (unpopulated) (GPP2 root port on APU) + device pci 7.0 off end # unused (GPP3 root port on APU) + device pci 8.0 off end # NB/SB Link P2P bridge + end #chip northbridge/amd/agesa/family15rl # PCI side of HT root complex + + chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus + device pci 10.0 on end # XHCI HC0 + device pci 10.1 on end # XHCI HC1 + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SMBUS + chip drivers/generic/generic #dimm 0 + device i2c 50 on end # 7-bit SPD address + end + chip drivers/generic/generic #dimm 1 + device i2c 51 on end # 7-bit SPD address + end + end # SM + device pci 14.1 off end # IDE + device pci 14.2 on end # HDA + device pci 14.3 on # LPC + chip superio/nuvoton/nct6776 + device pnp 2e.0 off end # Floppy + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off end # Com2 + device pnp 2e.5 on # Keyboard/Mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off end # CIR + #TODO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! + + device pnp 2e.a on end # ACPI + + #TODO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! + end #superio/nuvoton/nct6776 + end #device pci 14.3 # LPC + device pci 14.4 on end # PCI + device pci 14.5 on end # USB 2 + device pci 14.6 off end # Gec + device pci 14.7 off end # SD + device pci 15.0 off end # FCH GPP0 (unused) + device pci 15.1 off end # FCH GPP1 (unused) + device pci 15.2 off end # FCH GPP2 (unused) + device pci 15.3 off end # FCH GPP3 (unused) + + end #chip southbridge/amd/hudson + + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + + register "spdAddrLookup" = " + { + { {0xA0, 0x00}, {0xA2, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses + { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses + }" + + end #chip northbridge/amd/agesa/family15rl # CPU side of HT root complex + end #domain +end #chip northbridge/amd/agesa/family15rl/root_complex diff --git a/src/mainboard/asrock/fm2a88m-hdplus/dsdt.asl b/src/mainboard/asrock/fm2a88m-hdplus/dsdt.asl new file mode 100644 index 0000000..4471a07 --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/dsdt.asl @@ -0,0 +1,92 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "ASROCK", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Globals for the platform */ + #include "acpi/mainboard.asl" + + /* Describe the USB Overcurrent pins */ + #include "acpi/usb_oc.asl" + + /* PCI IRQ mapping for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/pcie.asl> + + /* Describe the processor tree (\_PR) */ + #include <cpu/amd/agesa/family15tn/acpi/cpu.asl> + + /* Describe the supported Sleep States for this Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/sleepstates.asl> + + /* Describe the Sleep Methods (WAK, PTS, GTS, etc.) for this platform */ + #include "acpi/sleep.asl" + + Scope(\_SB) { + /* global utility methods expected within the \_SB scope */ + #include <arch/x86/acpi/globutil.asl> + + /* Describe IRQ Routing mapping for this platform (within the \_SB scope) */ + #include "acpi/routing.asl" + + Device(PWRB) { + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) + Name(_STA, 0x0B) + } + + Device(PCI0) { + /* Describe the AMD Northbridge */ + #include <northbridge/amd/agesa/family15tn/acpi/northbridge.asl> + + /* Describe the AMD Fusion Controller Hub Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/fch.asl> + + } + + /* Describe PCI INT[A-H] for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/pci_int.asl> + + } /* End Scope(_SB) */ + + /* Describe SMBUS for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/smbus.asl> + + /* Define the General Purpose Events for the platform */ + #include "acpi/gpe.asl" + + /* Define the Thermal zones and methods for the platform */ + #include "acpi/thermal.asl" + + /* Define the System Indicators for the platform */ + #include "acpi/si.asl" + +} +/* End of ASL file */ diff --git a/src/mainboard/asrock/fm2a88m-hdplus/irq_tables.c b/src/mainboard/asrock/fm2a88m-hdplus/irq_tables.c new file mode 100644 index 0000000..16a3667 --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/irq_tables.c @@ -0,0 +1,107 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <arch/pirq_routing.h> +#include <console/console.h> +#include <cpu/amd/amdfam15.h> +#include <device/pci_def.h> +#include <stdint.h> +#include <string.h> + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* pci bridge */ + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/asrock/fm2a88m-hdplus/mainboard.c b/src/mainboard/asrock/fm2a88m-hdplus/mainboard.c new file mode 100644 index 0000000..38d45b9 --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/mainboard.c @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Felix Held <felix-coreboot(a)felixheld.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <northbridge/amd/agesa/agesawrapper.h> +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include <vendorcode/amd/agesa/f15tn/Proc/Fch/FchPlatform.h> + +#include <arch/acpi.h> +#include <arch/io.h> +#include <console/console.h> +#include <cpu/amd/agesa/s3_resume.h> +#include <cpu/x86/msr.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_def.h> + +/************************************************* + * enable the dedicated function in thatcher board. + *************************************************/ +static void mainboard_enable(device_t dev) +{ + msr_t msr; + + printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); + + msr = rdmsr(0xC0011020); + msr.lo &= ~(1 << 28); + wrmsr(0xC0011020, msr); + + msr = rdmsr(0xC0011022); + msr.lo &= ~(1 << 4); + msr.lo &= ~(1 << 13); + wrmsr(0xC0011022, msr); + + msr = rdmsr(0xC0011023); + msr.lo &= ~(1 << 23); + wrmsr(0xC0011023, msr); + + if (acpi_is_wakeup_s3()){ + agesawrapper_fchs3earlyrestore(); + } + + //disable all unconnected GPP_CLK outputs TODO: verify this again + u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE); + //GPP_CLK1: PCIe x1 slot + *(misc_mem_clk_cntrl + 0) = 0xF0; + //GPP_CLK3: populated ethernet chip + *(misc_mem_clk_cntrl + 1) = 0xF0; + //GPP_CLK4: unpopulated ethernet chip + *(misc_mem_clk_cntrl + 2) = 0x0F; + *(misc_mem_clk_cntrl + 3) = 0x00; + //SLT_GFX_CLK: PCIe x16 slot + *(misc_mem_clk_cntrl + 4) = 0xF0; +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/asrock/fm2a88m-hdplus/mptable.c b/src/mainboard/asrock/fm2a88m-hdplus/mptable.c new file mode 100644 index 0000000..6bb7d86 --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/mptable.c @@ -0,0 +1,188 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <arch/cpu.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <arch/smp/mpspec.h> +#include <cpu/amd/amdfam15.h> +#include <cpu/x86/lapic.h> +#include <device/pci.h> +#include <stdint.h> +#include <string.h> +#include "southbridge/amd/agesa/hudson/hudson.h" /* pm_ioread() */ + + +u8 picr_data[] = { + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x0A,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + 0x09,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F +}; +u8 intr_data[0x54] = { + 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + 0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x10,0x11,0x12,0x13 +}; + +static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned length) +{ + mc->mpc_length += length; + mc->mpc_entry_count++; +} + +static void my_smp_write_bus(struct mp_config_table *mc, + unsigned char id, const char *bustype) +{ + struct mpc_config_bus *mpc; + mpc = smp_next_mpc_entry(mc); + memset(mpc, '\0', sizeof(*mpc)); + mpc->mpc_type = MP_BUS; + mpc->mpc_busid = id; + memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype)); + smp_add_mpc_entry(mc, sizeof(*mpc)); +} + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + u8 byte; + + /* + * By the time this function gets called, the IOAPIC registers + * have been written so they can be read to get the correct + * APIC ID and Version + */ + u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24); + u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF); + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + memcpy(mc->mpc_oem, "AMD ", 8); + + smp_write_processors(mc); + + //mptable_write_buses(mc, NULL, &bus_isa); + my_smp_write_bus(mc, 0, "PCI "); + my_smp_write_bus(mc, 1, "PCI "); + bus_isa = 0x02; + my_smp_write_bus(mc, bus_isa, "ISA "); + + /* I/O APICs: APIC ID Version State Address */ + smp_write_ioapic(mc, ioapic_id, ioapic_ver, VIO_APIC_VADDR); + + /* PIC IRQ routine */ + for (byte = 0x0; byte < sizeof(picr_data); byte ++) { + outb(byte, 0xC00); + outb(picr_data[byte], 0xC01); + } + + /* APIC IRQ routine */ + for (byte = 0x0; byte < sizeof(intr_data); byte ++) { + outb(byte | 0x80, 0xC00); + outb(intr_data[byte], 0xC01); + } + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); + + /* PCI interrupts are level triggered, and are + * associated with a specific bus/device/function tuple. + */ +#define PCI_INT(bus, dev, int_sign, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), ioapic_id, (pin)) + + /* IOMMU */ + PCI_INT(0x0, 0x0, 0x0, 0x10); + PCI_INT(0x0, 0x0, 0x1, 0x11); + PCI_INT(0x0, 0x0, 0x2, 0x12); + PCI_INT(0x0, 0x0, 0x3, 0x13); + + /* Internal VGA */ + PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); + PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); + + /* SMBUS */ + PCI_INT(0x0, 0x14, 0x0, 0x10); + + /* HD Audio */ + PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]); + + /* USB */ + PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); + PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); + PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); + PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); + PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); + PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); + PCI_INT(0x0, 0x14, 0x2, intr_data[0x36]); + + /* sata */ + PCI_INT(0x0, 0x11, 0x0, intr_data[0x40]); + PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); + + /* on board NIC & Slot PCIE. */ + + /* PCI slots */ + device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); + if (dev && dev->enabled) { + u8 bus_pci = dev->link_list->secondary; + /* PCI_SLOT 0. */ + PCI_INT(bus_pci, 0x5, 0x0, 0x14); + PCI_INT(bus_pci, 0x5, 0x1, 0x15); + PCI_INT(bus_pci, 0x5, 0x2, 0x16); + PCI_INT(bus_pci, 0x5, 0x3, 0x17); + } + + /* PCIe Lan*/ + PCI_INT(0x0, 0x06, 0x0, 0x13); + + /* FCH PCIe PortA */ + PCI_INT(0x0, 0x15, 0x0, 0x10); + /* FCH PCIe PortB */ + PCI_INT(0x0, 0x15, 0x1, 0x11); + /* FCH PCIe PortC */ + PCI_INT(0x0, 0x15, 0x2, 0x12); + /* FCH PCIe PortD */ + PCI_INT(0x0, 0x15, 0x3, 0x13); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/asrock/fm2a88m-hdplus/romstage.c b/src/mainboard/asrock/fm2a88m-hdplus/romstage.c new file mode 100644 index 0000000..7014663 --- /dev/null +++ b/src/mainboard/asrock/fm2a88m-hdplus/romstage.c @@ -0,0 +1,138 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2012 Rudolf Marek <r.marek(a)assembler.cz> + * Copyright (C) 2014 Felix Held <felix-coreboot(a)felixheld.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <northbridge/amd/agesa/agesawrapper.h> + +#include <arch/acpi.h> +#include <arch/cpu.h> +#include <arch/io.h> +#include <arch/stages.h> +#include <cbmem.h> +#include <console/console.h> +#include <cpu/amd/agesa/s3_resume.h> +#include <cpu/amd/car.h> +#include <cpu/x86/bist.h> +#include <cpu/x86/lapic.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <device/pnp_def.h> +#include <southbridge/amd/agesa/hudson/hudson.h> +#include <southbridge/amd/agesa/hudson/smbus.h> +#include <stdint.h> +#include <string.h> +#include <superio/nuvoton/common/nuvoton.h> +#include <superio/nuvoton/nct6776/nct6776.h> + +#define MMIO_NON_POSTED_START 0xfed00000 +#define MMIO_NON_POSTED_END 0xfedfffff +#define SB_MMIO 0xFED80000 +#define SB_MMIO_MISC32(x) *(volatile u32 *)(SB_MMIO + 0xE00 + (x)) + +#define SERIAL_DEV PNP_DEV(0x2e, NCT6776_SP1) +//#define GPIO_DEV PNP_DEV(0x2e, IT8728F_GPIO) TODO + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + u32 val; + u8 byte; + device_t dev; + +#if IS_ENABLED(CONFIG_POST_DEVICE_PCI_PCIE) + hudson_pci_port80(); +#endif +#if IS_ENABLED(CONFIG_POST_DEVICE_LPC) + hudson_lpc_port80(); +#endif + + amd_initmmio(); + + if (!cpu_init_detectedx && boot_cpu()) { + + /* enable SIO LPC decode */ + dev = PCI_DEV(0, 0x14, 3); + byte = pci_read_config8(dev, 0x48); + byte |= 3; /* 2e, 2f */ + pci_write_config8(dev, 0x48, byte); + + /* enable serial decode */ + byte = pci_read_config8(dev, 0x44); + byte |= (1 << 6); /* 0x3f8 */ + pci_write_config8(dev, 0x44, byte); + + post_code(0x30); + + /* enable SB MMIO space */ + outb(0x24, 0xcd6); + outb(0x1, 0xcd7); + + /* SIO clock: set OSCOUT1_CLK_sel to 48MHz */ + u32 reg32; + reg32 = SB_MMIO_MISC32(0x28); + reg32 &= 0xFFF8FFFF; + reg32 |= 0x00020000; + SB_MMIO_MISC32(0x28) = reg32; + + nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + //TODO: does the SIO need some special initialization to make S3 work? + + //TODO: set RAM and FCH voltage + } + + /* Halt if there was a built in self test failure */ + post_code(0x34); + report_bist_failure(bist); + + /* Load MPB */ + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + post_code(0x37); + agesawrapper_amdinitreset(); + post_code(0x39); + + agesawrapper_amdinitearly(); + int s3resume = acpi_is_wakeup_s3(); + if (!s3resume) { + post_code(0x40); + agesawrapper_amdinitpost(); + post_code(0x41); + agesawrapper_amdinitenv(); + disable_cache_as_ram(); + } else { /* S3 detect */ + printk(BIOS_INFO, "S3 detected\n"); + + post_code(0x60); + agesawrapper_amdinitresume(); + amd_initcpuio(); + agesawrapper_amds3laterestore(); + + post_code(0x61); + prepare_for_resume(); + } + + post_code(0x50); + copy_and_run(); + + post_code(0x54); /* Should never see this post code. */ +}

1 0