[SerialICE] Serial output on Winbond W83627HG

[Corey Osgood]

On Tue, Mar 29, 2011 at 8:08 AM, Joseph Smith <joe at settoplinux.org> wrote:
>
>
> On Tue, 29 Mar 2011 05:17:50 -0600, Myles Watson <mylesgw at gmail.com> wrote:
>> On Tue, Mar 29, 2011 at 2:34 AM, Joseph Smith <joe at settoplinux.org>
> wrote:
>>>
>>>
>>> On Mon, 28 Mar 2011 22:51:23 -0600, Myles Watson <mylesgw at gmail.com>
>> wrote:
>>>>> Any other suggestions?
>>>>
>>>> Have you tried different host frequencies until you don't see garbage?
>>>>  If you know the default value, you could try it first.
>>>>
>>>
>>> Sorry for the ignorance but what do you mean by host frequencies?
>> Baudrate?
>> Yes.  That's all I meant.
>>
> Hmm, the baudrate that works fine with vendor bios is 115200 and that is
> what I have serialice set to, but I could play with other rates.
>
> Could the clock generator between the southbridge and superio be doing
> something funny to scramble the signal?

Can you send a superiotool dump with the serial ports enabled and
working? The registers say they're disabled in the one you sent.

-Corey