[SerialICE] Bricking (and unbricking) your board.

[Myles Watson]

On Tue, Jul 6, 2010 at 4:00 PM, Peter Stuge <peter at stuge.se> wrote:
> Myles Watson wrote:
>> I used SerialICE to set the PCI values to what they were in a saved
>> run of the factory BIOS, and it booted again.
>
> Which device were the registers in?
The HyperTransport controller and the SMBUS controller, but there
could be more.  I stopped trying to get all the masks correctly when I
saw how easy it was to break it.

Thanks,
Myles