[SeaBIOS] [PATCH 3/3] tpm: Set timeouts and durations to default values
Stefan Berger
stefanb at us.ibm.com
Sat Nov 21 00:59:46 CET 2015
"Kevin O'Connor" <kevin at koconnor.net> wrote on 11/20/2015 05:37:37 PM:
> From: "Kevin O'Connor" <kevin at koconnor.net>
> To: Stefan Berger/Watson/IBM at IBMUS
> Cc: seabios at seabios.org, Stefan Berger <stefanb at linux.vnet.ibm.com>
> Date: 11/20/2015 05:37 PM
> Subject: Re: [PATCH 3/3] tpm: Set timeouts and durations to default
values
>
> On Fri, Nov 20, 2015 at 01:32:32PM -0500, Stefan Berger wrote:
> > From: Stefan Berger <stefanb at linux.vnet.ibm.com>
> >
> > Remove the scaler that scaled the timeouts and durations by a factor
of
> > 10. Remove that to use the default values that are being used until
the
> > TPM specific ones are read from the TPM itself.
> >
> > Get these TPM specific values earlier from the device.
>
> Unless I'm missing something, determine_timeouts() still gets the
> values in microseconds while tpm_drivers.c expects them in
> milliseconds.
Let me revise the series.
Stefan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.seabios.org/pipermail/seabios/attachments/20151120/2a0c9196/attachment-0001.html>
More information about the SeaBIOS
mailing list