[flashrom] KabyLake Utilization of flashrom for BIOS update with two devices totalling 32MB.

[Nico Huber]

Hello Simon,

On 19.01.2018 16:23, Furlong, Simon wrote:
> Can you help explain as two why the SPI region fails to program
> (specifically due to the mmap failure)?

the attempt to map the flash chip into flashrom's user-space is a very
old relict that, I assume, doesn't apply to SPI programmers at all. It's
likely that the mapping just fails because there is no contiguous 32MiB
space at that address (IIRC, on Intel systems, at most 16MiB of the BIOS
flash is memory mapped). You may find more information about why the
mapping is rejected in your system log (e.g. dmesg).

To get rid of the attempt to map, you'd have to patch and build flashrom
by yourself. Here is a patch that might fix the issue for you [1]. If
you use Git, you can simply check it out with the following commands:

  git fetch https://review.coreboot.org/flashrom.git refs/changes/44/23344/1
  git checkout FETCH_HEAD

Some information about build requirements can be found here [2].

Hope that helps,
Nico

[1] https://review.coreboot.org/23344/
[2] https://flashrom.org/Downloads