<div dir="ltr"><div dir="ltr">Hello,<div><br></div><div>I have an Intel's ATOM Bay Trail board. The output of "inteltool" is:</div><div><div><br></div><div>CPU: ID 0x30679, Processor Type 0x0, Family 0x6, Model 0x37, Stepping 0x9</div><div>Northbridge: 8086:0f00 (Bay Trail)</div><div>Southbridge: 8086:0f1c (Bay Trail)</div><div>IGD: 8086:0f31 (unknown)</div></div><div><br></div><div>In coreboot configuration I selected:</div><div>Mainboard -> Mainboard model -> Bayley Bay FSP-based CRB</div><div>The default ROM chip size is 2MB. </div><div>This is also the size of coreboot.rom created after "make"</div><div><br></div><div>The board has 8MB BIOS flash. </div><div>It's delivered with a BIOS programming utility that runs under EFI shell.</div><div><br></div><div>The original BIOS has 2 versions: rom (5MB) and bin (8MB)</div><div>I tried to burn the 2MB coreboot.rom with the vendor's BIOS utlity.</div><div> </div><div>I got:</div><div>3 - Error: ROM file size does not match existing BIOS size. </div><div>Should I convert coreboot.rom to coreboot.bin ? How ?</div><div>If not, how can I program coreboot.rom ?</div><div><br></div><div>Thank you,<br></div><div>Zvika </div></div></div>