<div dir="ltr">
  
    
  
  <div text="#000000" bgcolor="#FFFFFF"><p>Hello, <br>
</p>
<p>thank you both, I successfuly modified the parameter using nvramtool. Unfortunately I did not keep wires<br>
attached to the laptop mainboard, so I will try to flash from the laptop or wait a bit (so I can have soldering tools).<br>
</p>
<p>Flashtool advertises against using it directly from a laptop, do you know if it can cause issues with the T420 ? Or if, were the bios bricked, I could unbrick it by flashing again externally ?</p><p>Thanks,</p><p>Mathias<br></p>
<p><br>
</p>
<div class="gmail-moz-cite-prefix">On 9/1/18 11:20 PM, Angel Pons wrote:<br>
</div>
<blockquote type="cite">
  <div dir="auto"><div class="gmail_quote" dir="auto">Hello Mathias,</div><div class="gmail_quote" dir="auto"><br></div><div class="gmail_quote" dir="auto">The
 prebuilt images are older than two years. My advice would be to build 
coreboot from source, from either master or 4.8.1 (4.8 is broken). To 
use the fn/ctrl swap, enabling "Use CMOS for configuration values" in 
Kconfig is needed.</div><div class="gmail_quote" dir="auto"><br></div><div class="gmail_quote" dir="auto">Note that using nvramtool as Evgeny stated should be possible with the old image though.</div><div class="gmail_quote" dir="auto"><br></div><div class="gmail_quote" dir="auto">Regards,</div><div class="gmail_quote" dir="auto"><br></div><div class="gmail_quote" dir="auto">Angel Pons</div></div>
</blockquote>
<br>
<div class="gmail-moz-cite-prefix">On 9/1/18 8:43 PM, Evgeny wrote:<br>
</div>

<blockquote type="cite">
    
  
  
    
  <p>Hi,<br>
      There is a CMOS option called "fn_ctrl_swap", you can set it with
      nvramcui payload or with nvramtool. </p>
</blockquote>
</div>

</div>