<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<style type="text/css" style="display:none;"><!-- P {margin-top:0;margin-bottom:0;} --></style>
</head>
<body dir="ltr">
<div id="divtagdefaultwrapper" style="font-size:12pt;color:#000000;font-family:Calibri,Helvetica,sans-serif;" dir="ltr">
<p style="margin-top:0;margin-bottom:0"></p>
<div>Hi, All,</div>
<div>The output of my board is attached below. The MRC.bin is extracted from panther, which I assume matches my board.</div>
<div>But the meminit fails. Do all the haswell use the same MRC, or how can I decide which mrc.bin is the one I should extract?</div>
<div><br>
</div>
<div>Thanks.</div>
<div><br>
</div>
<div>Zheng<br>
</div>
<div><br>
coreboot-4.6-894-ga26344d-dirty Wed Jan 24 05:38:45 UTC 2018 romstage starting...<br>
Disabling Watchdog reboot... done.<br>
SMBus controller enabled.<br>
Setting up static northbridge registers... done.<br>
Initializing Graphics...<br>
Back from haswell_early_initialization()<br>
CPU id(40651) ucode:0000001c Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz<br>
AES supported, TXT supported, VT supported<br>
PCH type: LP Premium, device id: 9c43, rev id 4<br>
Starting UEFI PEI System Agent ___<br>
CBFS: 'Master Header Locator' located CBFS at [300100:3fffc0)<br>
CBFS: Locating 'mrc.cache'<br>
CBFS: Found @ offset fec0 size 10000<br>
find_current_mrc_cache_local: No valid MRC cache found.<br>
CBFS: 'Master Header Locator' located CBFS at [300100:3fffc0)<br>
CBFS: Locating 'mrc.bin'<br>
CBFS: Found @ offset 9fec0 size 2eb04<br>
System Agent: Starting up...<br>
System Agent: Initializing PCH<br>
install_ppi: overwrite GUID {ed097352-9041-445a-80b6-b29d509e8845}<br>
install_ppi: overwrite GUID {908c7f8b-5c48-47fb-8357-f5fd4e235276}<br>
System Agent: Initializing PCH (SMBUS)<br>
System Agent: Initializing PCH (USB)<br>
System Agent: Initializing PCH (SA Init)<br>
System Agent: Initializing PCH (Me UMA)<br>
System Agent: Initializing Memory<br>
System Agent: Done.<br>
Sanity checking heap.<br>
sdram_initialize,153: rv=0<br>
here.<br>
sdram_initialize,186<br>
sdram_initialize,189<br>
ME: FW Partition Table : OK<br>
ME: Bringup Loader Failure : NO<br>
ME: Firmware Init Complete : NO<br>
ME: Manufacturing Mode : YES<br>
ME: Boot Options Present : NO<br>
ME: Update In Progress : NO<br>
ME: Current Working State : Normal<br>
ME: Current Operation State : Bring up<br>
ME: Current Operation Mode : Security Override via Jumper<br>
ME: Error Code : No Error<br>
ME: Progress Phase : BUP Phase<br>
ME: Power Management Event : Pseudo-global reset<br>
ME: Progress Phase State : 0x66<br>
RAM INIT FAILURE!</div>
<br>
<p></p>
</div>
</body>
</html>