<div>Hello Matt,<br></div><div><br></div><blockquote type="cite" class="protonmail_quote"><div>-------- Original Message --------<br></div><div>Subject: Re: [coreboot] Coreboot on X230 and Dualboot / How to make it work<br></div><div>Local Time: September 23, 2017 10:59 PM<br></div><div>From: matt.devillier@gmail.com<br><br></div><div>coreboot + Tianocore/CorebootPayloadPkg works perfectly well to run Windows on everything from SandyBridge to Skylake<br></div></blockquote><div><br></div><div>I'll stick to coreboot + SeaBios as I can boot linux/windows which perfectly fine and the installation seems to be easier and I can't see any reason why switching from (Sea)BIOS to UEFI.<br></div><div><br></div><div>One additional general question regarding the flashing on X230s.<br></div><div>Most howtos include that it is sufficient to flash only the upper 4MB BIOS Chip and leave the 2nd 8 MB BIOS Chip untouched.<br></div><div>After creating my 12 MB Coreboot.rom I split it and use only 4MB for flashing.<br></div><div>See also the Coreboot Wiki at <a href="https://www.coreboot.org/Board:lenovo/x230#Hardware_Flashring">https://www.coreboot.org/Board:lenovo/x230#Hardware_Flashring</a><br></div><div>"(...) Write the flash. Since you have to write only top 4M, first split out those 4M:<br></div><div> dd of=top.rom bs=1M if=build/coreboot.rom skip=8<br></div><div>Use flashrom to flash top.rom (...)"<br></div><div><br></div><div>As far as I understand the 2nd Chip include the Intel Mangement Engine (ME), shouldn't this chip also touched and (at least party) ME'cleaned?<br></div><div>Or is the 2nd BIOS not used at all after flashing Coreboot to the top 4MB chip?<br></div><div><br></div><div>[799]<br></div><div><br></div>