<div dir="auto">Thanks Nico. I do see 2 me related events.<div dir="auto"><br></div><div dir="auto">ME: Power Management Event: Clean Moff > Mx wake</div><div dir="auto">intel_me_path: mbp is not ready!</div><div dir="auto"><br></div><div dir="auto">How would I increase the log level?</div></div><div class="gmail_extra"><br><div class="gmail_quote">On May 16, 2017 9:48 AM, "Nico Huber" <<a href="mailto:nico.h@gmx.de">nico.h@gmx.de</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">On 16.05.2017 16:22, Alejandro Flores wrote:<br>
> I have a new acer chromebook I have flashed with coreboot + seabios<br>
> payload. It boots to linux ok, but then powers off suddenly after 30 min<br>
> regardless of whether I am using it.<br>
><br>
> I disabled hibernation and have been leaving it plugged in, but this<br>
> changes nothing. I suspect a faulty intel me since there is nothing else I<br>
> can think of. The strange thing is I did not use me cleaner but used the<br>
> full me extracted from the original bios. Later I downloaded the stock<br>
> chrombook bios for my model from google and extracted the me module from<br>
> that.<br>
><br>
> At this point I have built several variations of roms using the me module<br>
> from the original bios, the google bios, and "cleaned" versions of both but<br>
> always with the same problem of power off after 30 min.<br>
><br>
> I am confused as to what the problem may be. I used the intelmetool bundled<br>
> with coreboot but when I run it with the -s flag it seg faults.<br>
><br>
> In order to extract the me rom I used ifdtool that is included with<br>
> coreboot.<br>
> ./ifdtool -x bios.bin<br>
> The intel me module is found at offset 00001000 - 001fffff and is 2 mb in<br>
> size. Is that the correct way to do it?<br>
><br>
> Any suggestions would be appreciated.<br>
<br>
The ME state is logged in the coreboot console. You can read it with<br>
`cbmem -c` (see util/cbmem/ in the coreboot source tree). If you set<br>
the default log level high enough, you should find some lines starting<br>
with "ME:".<br>
<br>
Hope that helps,<br>
Nico<br>
<br>
</blockquote></div></div>