[coreboot] Building AMD Persimmon in MinGW
Wim Vervoorn
wvervoorn at eltan.com
Tue May 7 15:30:02 CEST 2013
Hello,
I noticed that KConfig includes the regex.c and .h files to solve this
issue. I did the same for nvramtool.exe and now it seems to work. (At
least I can build it and run it without errors).
Regards,
Wim
From: coreboot-bounces at coreboot.org
[mailto:coreboot-bounces at coreboot.org] On Behalf Of Wim Vervoorn
Sent: dinsdag 7 mei 2013 13:09
To: Zheng Bao; coreboot at coreboot.org
Subject: Re: [coreboot] Building AMD Persimmon in MinGW
Hello Zheng,
Any suggestions where I can find this? I haven't been able to locate it
until now.
Wim
From: Zheng Bao [mailto:fishbaoz at hotmail.com]
Sent: dinsdag 7 mei 2013 11:12
To: Wim Vervoorn; coreboot at coreboot.org
Subject: Re: [coreboot] Building AMD Persimmon in MinGW
You need to find a regex2.dll. Just putting it in folder coreboot is OK.
Zheng
> Date: Tue, 7 May 2013 09:07:18 +0200
> From: wvervoorn at eltan.com
> To: coreboot at coreboot.org
> Subject: Re: [coreboot] Building AMD Persimmon in MinGW
>
> Hello,
>
> This is the fragment where it fails:
>
> It seems that the call to regcomp is causing the issue.
>
> I don't think this has anything to do with direct access to the
> hardware. It seems to be some kind of pointer issue, the call seems to
> access data it can't reach.
>
>
>
/***********************************************************************
> *****
> * compile_reg_expr
> *
> * Compile a regular expression.
>
>
************************************************************************
> ****/
> void compile_reg_expr(int cflags, const char *expr, regex_t *reg)
> {
> static const size_t ERROR_BUF_SIZE = 256;
> char error_msg[ERROR_BUF_SIZE];
> int result;
>
> -->>>> if ((result = regcomp(reg, expr, cflags)) != 0) { <<---------
>
> regerror(result, reg, error_msg, ERROR_BUF_SIZE);
> fprintf(stderr, "%s: %s\n", prog_name, error_msg);
> exit(1);
> }
>
> printf( "compile_reg_expr 3\n");
>
> }
>
>
> Regards,
>
> Wim
>
> -----Original Message-----
> From: coreboot-bounces at coreboot.org
> [mailto:coreboot-bounces at coreboot.org] On Behalf Of Patrick Georgi
> Sent: dinsdag 7 mei 2013 8:51
> To: coreboot at coreboot.org
> Subject: Re: [coreboot] Building AMD Persimmon in MinGW
>
> Am 2013-05-07 01:56, schrieb Peter Stuge:
> > Sounds right. Would be great to find out more details about why and
> > how nvramtool is being used during the build!
> During the handling of cmos.layout and cmos.settings (if present and
> used).
>
> We don't need any special hardware access for that and should not use
> any such code while building coreboot.
> One place to look at is the win32mmap implementation, which _is_ used.
>
>
> Patrick
>
> --
> coreboot mailing list: coreboot at coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot
>
>
>
> --
> coreboot mailing list: coreboot at coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20130507/553559f2/attachment.html>
More information about the coreboot
mailing list