[coreboot] [flashrom] r487 - trunk
svn at coreboot.org
svn at coreboot.org
Sat May 9 09:24:23 CEST 2009
Author: hailfinger
Date: 2009-05-09 09:24:23 +0200 (Sat, 09 May 2009)
New Revision: 487
Modified:
trunk/ichspi.c
Log:
Trim default ICH SPI delay from 1000 to 10 microseconds. Since many
commands take around 10 microseconds to complete, it is totally
pointless to wait for 1000 microseconds before checking the status
again.
This patch is tested and reduced write time on ICH7 with SST25VF080B
from over one hour to 62 seconds.
Thanks to Ali Nadalizadeh for testing!
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
Acked-by: Myles Watson <mylesgw at gmail.com>
Modified: trunk/ichspi.c
===================================================================
--- trunk/ichspi.c 2009-05-09 02:34:18 UTC (rev 486)
+++ trunk/ichspi.c 2009-05-09 07:24:23 UTC (rev 487)
@@ -458,9 +458,9 @@
REGWRITE16(ICH7_REG_SPIC, temp16);
/* wait for cycle complete */
- timeout = 1000 * 60; // 60s is a looong timeout.
+ timeout = 100 * 1000 * 60; // 60s is a looong timeout.
while (((REGREAD16(ICH7_REG_SPIS) & SPIS_CDS) == 0) && --timeout) {
- myusec_delay(1000);
+ myusec_delay(10);
}
if (!timeout) {
printf_debug("timeout\n");
@@ -575,9 +575,9 @@
REGWRITE32(ICH9_REG_SSFS, temp32);
/*wait for cycle complete */
- timeout = 1000 * 60; // 60s is a looong timeout.
+ timeout = 100 * 1000 * 60; // 60s is a looong timeout.
while (((REGREAD32(ICH9_REG_SSFS) & SSFS_CDS) == 0) && --timeout) {
- myusec_delay(1000);
+ myusec_delay(10);
}
if (!timeout) {
printf_debug("timeout\n");
More information about the coreboot
mailing list