support for supermicro P4DL6 - serverworks GC-LE chipset
Dale J Robson
dale.j.robson at lmco.com
Fri Oct 11 14:22:01 CEST 2002
I'm trying to get LinuxBIOS working on a SMP xeon board:
http://www.supermicro.com/PRODUCT/MotherBoards/GC_LE/P4DL6.htm
I'm attaching the lspci -vv output.
Is there any possibility of this board being supported? Would it
require writing numerous new device drivers?
If this board is a poor fit for use with the LinuxBIOS project. Can
anyone recommend a more compatible dual p4 xeon board with 1000baseT?
--
Dale Robson
Software Engineer
Lockheed Martin - NESS Syracuse
-------------- next part --------------
00:00.0 Host bridge: Relience Computer: Unknown device 0012 (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.1 Host bridge: Relience Computer: Unknown device 0012
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.2 Host bridge: Relience Computer: Unknown device 0000
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:02.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4752 (rev 27) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 0008
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 8 min, 64 set, cache line size 10
Interrupt: pin A routed to IRQ 29
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at a800 [size=256]
Region 2: Memory at fe7ff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at fe7c0000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- AuxPwr- DSI- D1+ D2+ PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 0d)
Subsystem: Intel Corporation: Unknown device 1050
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 8 min, 56 max, 64 set, cache line size 10
Interrupt: pin A routed to IRQ 30
Region 0: Memory at fe7fd000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at af00 [size=64]
Region 2: Memory at fe7a0000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at fe7e0000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- AuxPwr- DSI+ D1+ D2+ PME+
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00:0f.0 ISA bridge: Relience Computer: Unknown device 0201 (rev 93)
Subsystem: Unknown device d915:5538
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64 set
00:0f.1 IDE interface: Relience Computer: Unknown device 0212 (rev 93) (prog-if 8a [Master SecP PriP])
Subsystem: Relience Computer: Unknown device 0212
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 set, cache line size 08
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at ffa0 [size=16]
00:0f.2 USB Controller: Relience Computer: Unknown device 0220 (rev 05) (prog-if 10 [OHCI])
Subsystem: Relience Computer: Unknown device 0220
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 80 max, 64 set
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fe7fe000 (32-bit, non-prefetchable) [size=4K]
00:0f.3 Host bridge: Relience Computer: Unknown device 0225
Subsystem: Unknown device d915:5538
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 set
00:10.0 Host bridge: Relience Computer: Unknown device 0101 (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Capabilities: [60] #07 [0040]
00:10.2 Host bridge: Relience Computer: Unknown device 0101 (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Capabilities: [60] #07 [0040]
00:11.0 Host bridge: Relience Computer: Unknown device 0101 (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Capabilities: [60] #07 [0040]
00:11.2 Host bridge: Relience Computer: Unknown device 0101 (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Capabilities: [60] #07 [0040]
01:03.0 Ethernet controller: BROADCOM Corporation: Unknown device 1645 (rev 15)
Subsystem: BROADCOM Corporation: Unknown device 0008
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 min, 64 set, cache line size 10
Interrupt: pin A routed to IRQ 31
Region 0: Memory at fe8f0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at fe8e0000 [disabled] [size=64K]
Capabilities: [40] #07 [0000]
Capabilities: [48] Power Management version 2
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
Address: c5881f3502be3950 Data: 6888
04:03.0 SCSI storage controller: Adaptec 7899P (rev 01)
Subsystem: Unknown device d915:5538
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 40 min, 25 max, 64 set, cache line size 10
Interrupt: pin A routed to IRQ 16
BIST result: 00
Region 0: I/O ports at e400 [disabled] [size=256]
Region 1: Memory at febfe000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at feba0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
04:03.1 SCSI storage controller: Adaptec 7899P (rev 01)
Subsystem: Unknown device d915:5538
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 40 min, 25 max, 64 set, cache line size 10
Interrupt: pin B routed to IRQ 17
BIST result: 00
Region 0: I/O ports at e800 [disabled] [size=256]
Region 1: Memory at febff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
More information about the coreboot
mailing list